Altra Industrial Motion (AIMC) 10-K2020 FY Annual report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

(Mark One)

For the fiscal year ended December 31, 2020

OR

For the transition period from               to              

Commission file number: 001-33209

ALTRA INDUSTRIAL MOTION CORP.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code:

(781) 917-0600

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☒    No  ☐   

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes  ☐    No  ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant based on the closing price (as reported by the NASDAQ Global Market) of such common stock on the last business day of the registrant’s most recently completed second fiscal quarter (June 30, 2020) was approximately $2.30 billion.

As of February 25, 2021, there were 64,807,253 shares of Common Stock, $0.001 par value per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE:

Portions of the following document are incorporated herein by reference into the Part of the Form 10-K indicated.

TABLE OF CONTENTS

2

PART I

Our Company

We are a leading global designer, producer and marketer of a wide range of electromechanical power transmission motion control (“PTMC”) products. Our technologies are used in various motion related applications and across a wide variety of high-volume manufacturing and non-manufacturing processes in which reliability and precision are critical to avoid costly down time and enhance the overall efficiency of operations.

We market our products under well recognized and established brands, which have been in existence for an average of over 85 years.  We serve a diversified group of customers comprised of over 1,000 direct original equipment manufacturers (“OEMs”) including GE, Honeywell and Siemens, and also benefit from established, long-term relationships with leading industrial distributors, including Applied Industrial Technologies, Grainger, Kaman Industrial Technologies and Motion Industries. Many of our customers operate globally across a large number of industries, ranging from transportation, turf and agriculture, energy and mining to factory automation, medical and robotics. Our relationships with these customers often span multiple decades, which we believe reflects the high level of performance, quality and service we deliver, supplemented by the breadth of our offering, vast geographic footprint and our ability to rapidly develop custom solutions for complex customer requirements.

Our product lines involve a large number of unique parts, are generally delivered in small order quantities with short lead times and require varying levels of technical support and responsive customer service. Many of our OEM customers incorporate our products into their designs of their equipment, helping to generate high switching costs and foster brand preference. As a result of these characteristics, the essential nature of our products and the wear to which many are subjected, we generate a significant amount of recurring revenue with repeat customers. Our large installed base generates significant aftermarket replacement demand, which we estimate accounted for approximately 31% of revenues in 2020.

We seek to offer products and services guided by what we call the Voice of the Customer (“VOC”). We employ an integrated sales and marketing strategy that is focused on both key industries and individual product lines. We believe this dual “vertical” market and “horizontal” product-oriented approach distinguishes us in the marketplace by allowing us to quickly identify trends and customer growth opportunities and deploy resources accordingly.

We believe our geographic footprint and portfolio of strong brands provides a platform from which to extend our leading market positions. Our expansive global footprint comprised of 48 manufacturing facilities, 19 service sales/engineering centers and approximately 9,100 employees enables us to serve global customers on a local basis.  In 2020, approximately 50% of our revenues were generated from customers in North America, 28% were generated in Europe and 22% in Asia Pacific and the rest of the world. The diversification of our revenues on a geographical, end-market, business mix and customer basis are outlined below for the 2020 fiscal year.

In this Annual Report on Form 10-K, the terms “Altra”, “Altra Motion,” “the Company,” “we,” “us” and “our” refer to Altra Industrial Motion Corp. and its subsidiaries, except where the context otherwise requires or indicates.

Our internet address is www.altramotion.com. By following the link “Investor Relations” and then “Financials” and then “SEC Filings” on our internet website, we make available, free of charge, our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) as soon as reasonably practicable after such forms are filed with or furnished to the Securities and Exchange Commission. We are not including information contained on or available through our website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K.

History and Acquisitions

Formation of Altra

Although Altra was incorporated in Delaware in 2004, much of our current business has its roots with the prior acquisition by Colfax Corporation, or Colfax, of the MPT (mechanical power transmission) group of Zurn Technologies, Inc. in December 1996. Colfax subsequently acquired Industrial Clutch Corp. in May 1997, Nuttall Gear Corp. in July 1997 and the Boston Gear and Delroyd Worm Gear brands in August 1997 as part of Colfax’s acquisition of Imo Industries, Inc. In February 2000, Colfax acquired Warner Electric, Inc., which sold products under the Warner Electric, Formsprag Clutch, Stieber, and Wichita Clutch brands. Colfax formed Power Transmission Holding, LLC or “PTH” in June 2004 to serve as a holding company for all of these power transmission businesses. Boston Gear was established in 1877, Warner Electric, Inc. in 1927, and Wichita Clutch in 1949.

3

On November 30, 2004, we acquired our original core business through the acquisition of PTH from Colfax. We refer to this transaction as the PTH Acquisition.

On October 22, 2004, The Kilian Company, or Kilian, a company formed at the direction of Genstar Capital, then the largest stockholder of Altra, acquired Kilian Manufacturing Corporation from Timken U.S. Corporation. At the completion of the PTH Acquisition, (i) all of the outstanding shares of Kilian capital stock were exchanged for shares of our capital stock and (ii) Kilian and its subsidiaries were transferred to our former wholly owned subsidiary Altra Power Transmission, Inc.

Selected Past Acquisitions and Transactions

On November 22, 2013, we changed our legal corporate name from Altra Holdings, Inc. to Altra Industrial Motion Corp.

On December 31, 2014, Altra Power Transmission, Inc., our former wholly owned subsidiary, was merged into Altra Industrial Motion Corp.

On October 1, 2018 (the “A&S Closing Date”), Altra and Fortive Corporation (“Fortive”) consummated the combination of Altra with four operating companies from Fortive’s Automation & Specialty platform (excluding Fortive’s Hengstler and Dynapar businesses) (the “A&S Business”).  The A&S Business, consisting of four key brands, Kollmorgen, Portescap, Thomson and Jacobs Vehicle Systems, designs, manufactures, markets and sells electromechanical and electronic motion control products, including standard and custom motors, drives and controls; linear motion systems, ball screws, linear bearings, clutches/brakes, linear actuators and mechanical components; and through Jacobs Vehicle Systems, supplemental braking systems for commercial vehicles.  

In accordance with the terms and conditions of the Agreement and Plan of Merger and Reorganization (the “Merger Agreement”), dated March 7, 2018, among Altra, Fortive, McHale Acquisition Corp. (“Merger Sub”) and Stevens Holding Company, Inc. (“Stevens Holding”), and the Separation and Distribution Agreement, dated March 7, 2018, among Altra, Fortive and Stevens Holding (the “Distribution Agreement”), (1) Fortive transferred certain assets, liabilities and entities constituting a portion of the A&S Business to Stevens Holding, (2) Fortive distributed to its stockholders all of the issued and outstanding shares of Stevens Holding common stock held by Fortive by way of an exchange offer (the “Distribution”) and (3) Merger Sub merged with and into Stevens Holding and Stevens Holding became a wholly-owned subsidiary of Altra, and the issued and outstanding shares of Stevens Holding common stock converted into shares of Altra common stock (the “Merger”). In addition, pursuant to the Merger Agreement, prior to the effective time of the Merger, Fortive transferred certain non-U.S. assets, liabilities and entities constituting the remaining portion of the A&S Business to certain subsidiaries of Altra, and the Altra subsidiaries assumed substantially all of the liabilities associated with the transferred assets (the “Direct Sales”) (all of the foregoing, collectively, the “Fortive Transaction”).  Upon consummation of the Fortive Transaction, the shares of Stevens Holding common stock then outstanding were automatically converted into the right to receive 35.0 million shares of Altra common stock, which were issued by Altra on the Closing Date, and represented approximately 54% of the outstanding shares of Altra common stock, together with cash in lieu of fractional shares. Altra’s pre-Merger shareholders continued to hold the remaining approximately 46% of the outstanding shares of Altra common stock.

The aggregate purchase price for the A&S Business of approximately $2,855.7 million, subject to certain post-closing adjustments, consisted of $1,400.0 million of cash and debt instruments transferred to Fortive and shares of Altra common stock received by Fortive shareholders valued at approximately $1,455.7 million. The value of the common stock was based on the closing stock price on the last trade date prior to the A&S Closing Date of $41.59. The Fortive Transaction was consummated on October 1, 2018 and, accordingly, the results of operations of the A&S Business are included in our operating results from October 1, 2018 onward.

In connection with the Fortive Transaction, certain additional agreements were entered into, including, among others, an Employee Matters Agreement, dated March 7, 2018, among Altra, Fortive and Stevens Holding (the “Employee Matters Agreement”), a Tax Matters Agreement (the “Tax Matters Agreement”), a Transition Services Agreement (the “Transition Services Agreement”), in each case, dated October 1, 2018, among Altra, Fortive, and Stevens Holding, and an Intellectual Property Cross-License Agreement, dated October 1, 2018, between Altra and Fortive.  In addition, effective October 1, 2018, we filed a Certificate of Amendment to our Articles of Incorporation to increase the number of authorized shares of Altra common stock from 90.0 million shares to 120.0 million shares.

Our Industry

Based on industry data provided by the Power Transmission Distributors Association in collaboration with MDM Analytics, we estimate that global industrial power transmission motion control products generated revenues of approximately $208 billion in 2020.  These products are collectively used to generate, transmit, control and transform mechanical energy.  Altra participates in portions of the motor, control, linear, gearing, clutch, brake, coupling, belted drive, and non-industrial bearing segments.

4

The global power transmission motion control industry in which we compete is highly fragmented, with over 1,000 small manufacturers and relatively few players of scale. While smaller companies tend to focus on regional niche markets with narrow product lines, larger players that generate annual revenue of over $100 million generally offer a broader range of products and provide global sales and service capabilities.

Buyers of power transmission motion control products tend to be broadly diversified and are often either OEMs, end users, or systems integrators operating across many end markets, including manufacturing, factory automation, aerospace and defense, food and beverage, metals and mining, energy, medical, robotics and other markets. These customers typically place a premium on factors such as quality and reliability, performance, pricing, distribution channel access, technology and innovation, application engineering and customer support, breadth of offering and brand name recognition. We believe the most successful industry participants are those that leverage their engineering expertise and specific industry knowledge, reputation for quality and reliability and technical support capabilities to maintain attractive margins and gain market share.

The global power transmission motion control market is driven by general macro-economic growth and secular trends such as the increasing concern for industrial safety and rising demand for motion control in the medical, food and beverage, electrical, automotive and machinery industries. The rapid pace of globalization and developments in the automation sector have also supported growth. Asia Pacific is the fastest-growing region for motion control products due to increasing demand for automation in manufacturing facilities and rapid industrial expansion in countries like China and India. Motion control products tend to be higher-margin than power transmission products due to a greater use of technology and leverage in end markets with more attractive secular trends.

Our Business Strategy

Establish and Capitalize on the Altra Business System to Drive Margin Expansion and Organic Growth. We believe we can continue to improve profitability through cost control, overhead rationalization, global process optimization, expanded implementation of lean manufacturing techniques and strategic pricing initiatives. Our operating plan, executed through our manufacturing centers of excellence, provides additional opportunities to consolidate purchasing processes and reduce costs by sharing best practices across geographies and business lines. By combining best practices from the former Altra Operational Excellence program with Fortive’s signature Fortive Business System (“FBS”) we have established the Altra Business System (“ABS”) to generate cost savings and provide efficiency opportunities. ABS incorporates a management philosophy with integrated practices that focus on employing best-in-class tools, knowledge and expertise to drive continuous improvement in lean manufacturing, leadership and growth objectives, further enhancing our ability to achieve our aggressive strategic objectives. We are applying ABS concepts to all areas of our business, including how we grow, how we create new products and how we develop new people to ultimately drive strong results.

Collaborate with Customers to Create New Opportunities. We focus on developing new products across our business in direct response to customer requirements. Our extensive application-engineering know-how drives both new and repeat revenue opportunities, supported by a substantiated history of innovation, with over 800 patents granted and pending worldwide. We intend to continue to drive organic growth by investing in new technologies and manufacturing techniques to attain and sustain competitive leadership in the industries we serve. In addition, we also plan to expand our customer collaboration initiatives by continuing to move up the technology spectrum, providing more advanced product, software and service solutions.  

Leverage Global Business Presence and Shared Services. We seek to foster the sharing of best practices throughout our organization, challenging our business leaders to work together to identify new markets, potential cross-selling opportunities and increase penetration with existing customers.  By leveraging our global presence, our businesses can work together to identify cost-saving opportunities and improve our overall supply chain management. We believe that our business will benefit from our highly technical global customer service operations, cohesive marketing efforts and consolidated corporate support functions, increasing efficiency and reducing costs.

Focus on Key Niche End Markets to Increase Organic Growth. We emphasize strategic marketing to focus on new growth opportunities in key end-user and OEM markets. Through a systematic process that leverages our core brands and products, we seek to identify attractive markets and product niches, collect customer and industry data, identify market drivers, tailor product and service solutions to specific customer requirements and deploy resources to gain market share and drive future revenue growth.

Attract and Retain Talented Associates. We believe that our team of talented employees, united by a common culture in pursuit of continuous improvement, provides a significant competitive advantage. We will seek to continue to attract, develop and retain world-class leaders and associates globally and to drive their engagement with our customer-centric approach.

Realize Cost Savings by Leveraging Core Competencies. Through the Fortive Transaction, we estimated there to be up to approximately $52 million in run rate synergies able to be realized by the end of 2022. Driven by the economic downturn induced by

5

the COVID-19 pandemic and the subsequent impact on Altra’s revenues, in 2020 we discontinued tracking synergies related solely to the Fortive Transaction and instead focused on the overall execution of defined cost savings initiatives, both synergy related and those attributable to the decline in the general economy. In 2019, we delivered $15 million in acquisition related synergies. In 2020, combining savings from both synergies and general cost improvement actions, we achieved approximately $70 million in total savings, a portion of which will continue in 2021. We believe that our supply chain expertise, value engineering capabilities, facility consolidation experience and deployment of the Altra Business System will help us optimize our business processes and realize these savings.

Our Strengths

Superior financial profile with high margins and strong cash flow generation. We have an attractive financial profile highlighted by our diversified revenue stream across products and end markets, high margin profile and substantial cash flow. Our strong cash flow generation is attributable to attractive gross margins, a high degree of operational leverage across our selling, general and administrative expenses and minimal capital expenditures. For the year ended December 31, 2020, our gross profit margin increased 30 basis points from 35.8% to 36.1% supporting record cash flow from operations of approximately $262.5 million in 2020.

Our flexible cost structure and diversified end market and geographic exposure have allowed us to perform well throughout economic cycles. From 2008 through 2010, our business was able to generate higher cash flow through the strict management of working capital, enabling us to reduce our indebtedness and maintain a net debt to adjusted EBITDA leverage ratio within our targeted range of 2.0x to 3.0x. We believe that after the acquisition of the A&S Business, our business has the capability to support growth while also taking advantage of operating leverage and the benefits of our cost rationalization initiatives, all of which we believe will allow us to continue delivering sustainably strong cash flow. As a result, over time we intend to manage our leverage level to below 3.0x.

Scale and breadth combined with leading brands, technology and market position. We are a global player with significant scale, technological leadership and a broad product offering supported by leading brands, factors which we expect will contribute to a market share advantage over our competitors. The acquisition of the A&S Business moved our business up the power transmission, motion control and automation technology spectrum, increasing our presence in highly engineered products. These engineered products, although higher margin and exposed to high growth applications, are simultaneously complementary to our portfolio. Our engineered servo, stepper and specialty miniature motors, drives and controls, and linear automation systems capabilities will enable us to drive innovation across our offering and expand solutions for existing customers. Similarly, the combination of the JVS suite of engine braking products with our already strong clutch brake offering expands our addressable market and provides our customers with a unique portfolio of braking solutions.

Broad geographic footprint and global reach. The capabilities and scale of our Company provides a broad global platform from which to drive growth. We are able to leverage our expansive global footprint comprised of 48 manufacturing facilities, 19 service sales/engineering centers and approximately 9,100 employees worldwide to serve our global customers with local resources. While we expect to build on our leading market positions and strong brands in North America, our broadened global platform also positions us to capitalize on key long-term growth opportunities in Europe and especially in emerging markets.

Diversified end-markets provide stability. With no end market comprising more than approximately 15% of our total revenue for the fiscal year ended December 31, 2020, our end-market exposure is diversified, which we expect will provide stability to our revenue streams and help to dampen potential volatility in any particular industry. We believe that the acquisition of the A&S Business significantly expands our total addressable market, particularly in higher growth, higher margin end-markets like medical, advanced material handling, factory automation, food and beverage and robotics. The exposure to these attractive new end markets helps to diversify our relative potential exposure to more cyclical end markets like mining, renewable energy, heavy duty truck and oil & gas.

Our business is also geographically diversified, with approximately 50% of revenue generated outside of North America in the year ended December 31, 2020. Finally, our products often facilitate movement which subjects them to wear and requires their periodic replacement. Our large installed base of products generates significant aftermarket replacement demand, which we estimate accounted for approximately 31% of revenue for the year ended December 31, 2020. Given the critical nature of many of our products and often high switching costs for our customers, we believe that this base of recurring revenue is stable.

Customer diversification with long-standing customer and distributor relationships. We have a strong, diversified customer base of over 1,000 OEMs and leading power transmission and motion control distributors which market our products via a diversified network of over 3,000 outlets globally.  For the fiscal year ended December 31, 2020, there was no meaningful customer concentration among either our OEMs or distributor customers, the largest of which accounts for less than 5% of total revenue for the fiscal year ended December 31, 2020. Some of our largest OEM customers include Cummins, Daimler AG, General Electric, John

6

Deere, and Siemens, all of whom we have had relationships with for decades. We believe that these deep relationships exhibit our commitment to high levels of product quality and service, resulting in customer satisfaction and ultimately, retention.

Our scale, expansive product offering and end-user preference for our products make our product portfolio attractive to both large, multi-branch distributors and regional, independent distributors. We often participate in lengthy design and qualification processes with key customers for crucial components which ultimately become “spec’d-in” to our customers’ own designs. Further, many of our products involve a large number of unique parts, are delivered in small order quantities with short lead times and require varying levels of technical support, all of which help to drive high switching costs and generate significant recurring opportunities with repeat customers.

Aftermarket sales supported by large installed base. On average, our brands have been in operation for over 85 years and we believe we benefit from one of the largest installed customer bases in the industry. The moving, wearing nature of our products necessitates regular replacement and our large installed base of products generates significant aftermarket replacement demand. This has created a recurring revenue stream from a diversified group of end-user customers. For the fiscal year ended December 31, 2020, we estimate that approximately 31% of our revenues were derived from aftermarket sales.

Experienced management team. We are led by a senior management team with significant industry, manufacturing and acquisition integration experience which has implemented various initiatives that have contributed and will continue to contribute, to our operational and financial performance. The management team combines talent from both our Power Transmission Technologies and Automation & Specialty segments, with significant experience in power transmission, motion control and automation.

Business Segments

Our company consists of two business segments:  Power Transmission Technologies (“PTT”) and Automation & Specialty (“A&S”).

7

See Note 17 to the consolidated financial statements for financial information about our segments.

Research and Development and Product Engineering

We closely integrate new product development with marketing, manufacturing and product engineering in meeting the needs of our customers and addressing emerging trends. We have global product engineering teams that work to enhance our existing products and develop new product applications for our growing base of customers that require custom solutions. We believe these capabilities provide a significant competitive advantage in the development of high quality power transmission, motion control and automation products. Our product engineering teams focus on:

Our continued investment in new product development is intended to help drive customer growth as we address key customer needs.

Sales and Marketing

We sell our products in over 100 countries to over 1,000 direct OEM customers and over 3,000 distributor outlets. We offer our products through our direct sales force comprised of approximately 350 company-employed sales engineers as well as a relatively small number of independent sales representatives. Our worldwide sales and distribution presence enables us to provide timely and responsive technical support and service to our customers, many of which operate globally, and to capitalize on growth opportunities in both developed and emerging markets around the world.

Our operating companies employ an integrated sales and marketing strategy concentrated on specific battlegrounds – the intersection of key industries, product lines and geographic regions where we believe we can offer differentiated solutions to our customers. We believe this focus on battlegrounds distinguishes us in the marketplace allowing us to quickly identify trends and customer growth opportunities and deploy resources accordingly. Within our battlegrounds, we market to OEMs, encouraging them to incorporate our products into their equipment designs, to distributors and to end-users, helping to foster brand preference. With this strategy, we are able to leverage our market experience, product technology and global reach to sell power transmission, motion control and automation solutions for a host of focused applications.

Distribution

Our products are either incorporated into end products sold by OEMs or sold through industrial distributors as aftermarket products to end users and smaller OEMs. We operate a geographically diversified business. For the year ended December 31, 2020, we derived approximately 50% of our net sales from customers in North America, 28% from customers in Europe and 22% from customers in Asia and the rest of the world. Our global customer base is served by an extensive global sales network comprised of our sales engineers as well as our network of over 3,000 distributor outlets.

Rather than serving as passive conduits for delivery of product, our industrial and high-tech distributors can be active participants in influencing product purchasing decisions. In addition, distributors play a critical role through stocking inventory of our products, which amplifies the accessibility of our products to aftermarket buyers. It is for this reason that distributor partner relationships are an important component of our route-to-market strategy. We enjoy strong established relationships with the leading distributors as well as a broad, diversified base of specialty and regional distributors.

Competition

While we believe that many of our businesses are leaders in many of our served markets, we operate in highly fragmented and very competitive industries within the power transmission motion control market. Some of our competitors have achieved substantially more market penetration in certain of the markets in which we operate, such as helical gear drives or standard servo motors, and some of our competitors are larger than us and have greater financial and other resources. In addition, with respect to certain of our products, we compete with divisions of our OEM customers. Competition in our business lines is based on a number of

8

considerations including quality, reliability, performance, pricing, delivery speed, technology and innovation, design and application engineering support and brand name recognition. Our customers increasingly demand a broad product range and we must continue to develop our expertise in order to manufacture and market these products successfully. To remain competitive, regular investment in manufacturing, customer service and support, marketing, sales, research and development and intellectual property protection is required. We may have to adjust the prices of some of our products to stay competitive. In addition, some of our larger, more sophisticated customers are attempting to reduce the number of vendors from which they purchase in order to increase their efficiency. There is substantial and continuing pressure on major OEMs and larger distributors to reduce costs, including the cost of products purchased from outside suppliers such as us. As a result of cost pressures from our customers, our ability to compete depends in part on our ability to generate production cost savings and, in turn, find reliable, cost-effective outside component suppliers or manufacturers for our products. See “Risk Factors — Risks Related to our Business and Industry— We operate in the highly competitive power transmission and motion control industries and if we are not able to compete successfully our business may be significantly harmed.”

Intellectual Property

We rely on a combination of patents, trademarks, copyright, and trade secret laws in the United States and other jurisdictions, as well as employee and third-party non-disclosure agreements, license arrangements, and domain name registrations to protect our intellectual property. We sell our products under a number of registered and unregistered trademarks, which we believe are widely recognized in the PTMC industry. Although in aggregate our intellectual property is important to our operations, we do not believe any single patent, trademark or trade name is material to our business as a whole with the exception of certain trademarks associated with our Bauer, Boston Gear, Jacobs Vehicle Systems, Kollmorgen, Portescap, Stromag, Svendborg, TB Wood’s, Thomson and Warner Electric brands. Any issued patents that cover our proprietary technology and any of our other intellectual property rights may not provide us with adequate protection or be commercially beneficial to us and patents applied for may not be issued. The issuance of a patent is not conclusive as to its validity or its enforceability. Competitors may also be able to design around our patents. If we are unable to protect our patented technologies, our competitors could commercialize technologies or products which are substantially similar to ours.

With respect to proprietary know-how, we rely on trade secret laws in the United States and other jurisdictions and on confidentiality agreements. Monitoring the unauthorized use of our technology is difficult and the steps we have taken may not prevent unauthorized use of our technology. The disclosure or misappropriation of our intellectual property could harm our ability to protect our rights and our competitive position.

Some of our registered and unregistered trademarks include: Ameridrives, Bibby Transmissions, Bauer Gear Motor, Boston Gear, Delevan, Delroyd, Deltran, Formsprag, Huco Dynatork, Inertia Dynamics, Guardian Couplings, Industrial Clutch, Jacobs Vehicle Systems, Jake Brake, Kilian, Kollmorgen, Marland, Matrix, Nuttall Gear, Portescap, PowerFlex, Stieber, Stromag, Svendborg Brakes, TB Wood’s, Thomson, Twiflex, Warner Electric, and Wichita Clutch. From time to time, Altra engages in litigation to protect its intellectual property rights.

Human Capital Resources

Employee Demographics. As of December 31, 2020, we employed approximately 9,100 people on a full-time basis in 32 countries. Approximately 3,500 were employed in the United States and approximately 5,600 were employed outside of the United States. Certain demographics of our employee population are set forth by regional location, gender, and age within the following table:

9

Within the United States, approximately 650 were hourly-rated, unionized employees. Outside the United States, we have government-mandated collective bargaining arrangements and union contracts in certain countries, particularly in Europe where certain of our employees are represented by unions and/or works councils. The Company believes that its relationship with employees is good. See “Risk Factors — Risks Related to Our Business and Industry — We may be subject to work stoppages at our facilities, or our customers may be subjected to work stoppages, which could seriously impact our operations and the profitability of our business.”

Diversity and Inclusion.  We are committed to providing a secure workplace that develops and leverages the capabilities of our associates and encourages diversity of thought. Clear corporate policies support our endeavor to ensure a safe, harassment-free work environment led by principles of equality and fairness. To ensure that diversity, equity and inclusion is engrained within our culture, Altra formed a Diversity and Inclusion Committee which guides, recommends, and supports efforts to further diversity, equity and inclusion with the oversight of the Nominating and Corporate Governance Committee of Altra’s Board of Directors.  We strive to build an ever-improving organization, anchored in a dedication to creating an inclusive environment which engages our global talent to enhance operational outcomes.

Employee Engagement. We prioritize employee engagement and value employee feedback.  In 2020, approximately 80% of Altra team members responded to and participated in our employee engagement survey.  The survey enables us to monitor engagement and results serve as a guide to establish initiatives aimed to enhance the employee experience and analyze efficacy of those initiatives year over year.  In addition to our company-wide engagement survey, our businesses also conduct localized, periodic reviews and pulse surveys to gauge employee satisfaction, obtain employee feedback of specific issues on initiatives, and identify shortfalls and opportunities for improvement.

Talent Management.  Our aim is to provide an environment that stimulates and fully develops the capabilities of our employees.  We recognize that the success of our employees drives effective operational process, innovation, and long-term value creation for our stakeholders. We offer competitive compensation and benefit packages that include, depending on location and eligibility, annual bonuses, retirement plans with Company contributions, stock awards, health care and other benefits, paid time off, family leave and dependent care resources among many others.  At the core of our strategy and our human capital objectives is attracting, recruiting, and retaining, diverse and talented employees. Altra’s robust talent management and succession planning processes include the identification of critical personnel and positions based on current and future business strategies and objectives, the identification of prospective successors, and establishing detailed plans for talent development. See “Risk Factors — Risks Related to Our Business and Industry — We depend on the services of key executives, the loss of whom could materially harm our business.”  See also “Risk Factors — Risks Related to Our Business and Industry — If we lose certain of our key sales, marketing, skilled machinist or engineering personnel, our business may be adversely affected.”

Health, Safety and Pandemic Response.  At Altra we recognize that safety is critical to our success. Altra maintains a comprehensive program to monitor, track, and evaluate safety across our global businesses. Our safety program includes but is not limited to tracking key metrics such as Total Recordable Case Rate, proactive identification of at-risk conditions and behaviors, and maintaining a comprehensive near miss program, to ensure continuous improvement of our safety performance. In response to COVID-19, Altra has created a Pandemic Response Team to monitor, evaluate and manage our operations and compliance with safety protocols.  We have taken several actions intended to enhance the safety of our employees which include but are not limited to the following:

Suppliers and Raw Materials

We obtain raw materials, component parts and supplies from a variety of sources, generally from more than one supplier. Our suppliers and sources of raw materials are based in both the United States and other countries and we believe that our sources of raw materials are adequate for our needs for the foreseeable future. We do not believe the loss of any one supplier would have a material adverse effect on our business or results of operations. Our manufacturing operations employ a wide variety of raw materials, including aluminum, copper, electronic components, plastics, rare-earth magnets, and steel. We generally purchase our materials on the open market, where certain commodities such as steel and copper have fluctuated in price significantly in recent years. We have

10

not experienced any significant shortage of our key materials and have not historically engaged in hedging transactions for commodity suppliers.

Our ability, including manufacturing or distribution capabilities, and that of our suppliers, business partners and contract manufacturers, to make, move and sell products is critical to our success. Damage or disruption to our or their manufacturing or distribution capabilities due to weather, natural disaster, fire or explosion, terrorism, pandemics, strikes, repairs or enhancements at facilities, excessive demand, raw material shortages, or other reasons, could impair our ability, and that of our suppliers, to manufacture or sell our products. Failure to take adequate steps to mitigate the likelihood or potential impact of such events, or to effectively manage such events if they occur, could adversely affect our business, financial condition and results of operations, as well as require additional resources to restore our supply chain.

Seasonality

General economic conditions impact our business and financial results, and certain of our businesses experience seasonal and other trends related to the industries and end markets that they serve. For example, sales to OEMs are often stronger immediately preceding and following the launch of new products. In addition, we experience seasonality in our turf and garden business. As our large OEM customers prepare for the spring season, our shipments generally start increasing in December, peak in February and March, and begin to decline in April and May. This allows our customers to have inventory in place for the peak consumer purchasing periods for turf and garden products. The June-through-November period is typically the low season for us and our customers in the turf and garden market. Seasonality is also affected by weather and the level of housing starts. However, as a whole, we are not subject to material seasonality.

Regulatory Matters

We face extensive government regulation both within and outside the United States relating to the development, manufacture, marketing, sale and distribution of our products. The following sections describe certain significant regulations to which our businesses are subject. There may be additional regulations that apply to our businesses.

Environmental Laws and Regulations

Our operations and properties are subject to laws and regulations relating to environmental protection, including those governing air emissions, water discharges and waste management, and workplace health and safety. See “Risk Factors — Risks Related to Our Business and Industry — We are subject to environmental laws that could impose significant costs on us and the failure to comply with such laws could subject us to sanctions and material fines and expenses.”

Export/Import Compliance

We are required to comply with various U.S. export/import control and economic sanctions laws, including:

Other nations’ governments have implemented similar export and import control regulations, which may affect our operations or transactions subject to their jurisdictions. See “Risk Factors – Legal and Compliance Risks – Changes to U.S. trade policy, tariff and import/export regulations and foreign government regulations could adversely affect our business, operating results, foreign operations, sourcing and financial condition.”

11

Working Capital

We maintain an adequate level of working capital to support the needs of our businesses. There are no unusual industry practices or requirements relating to working capital items. In addition, we believe our sales and payment terms are generally similar to those of our competitors.

Backlog

Our unfilled product orders were approximately $500.5 million and $467.4 million as of December 31, 2020 and 2019 respectively. We expect that a large majority of the unfilled orders as of December 31, 2020 will have been delivered to customers within three to four months of such date. Given the relatively short delivery periods and rapid inventory turnover that are characteristic of most of our products and the shortening of product life cycles, we believe that backlog is indicative of short-term revenue performance, but is not necessarily a reliable indicator of medium-term or long-term revenue performance.

Government Contracts

Although the substantial majority of our revenues in 2020 were from customers other than governmental entities, we do have agreements relating to the sale of products to government entities. As a result, we are subject to various statutes and regulations that apply to companies doing business with governments and government-owned entities.

International Operations

Altra’s products are available worldwide, and our principal markets outside the United States are in Europe and Asia. We also have operations around the world, and this geographic diversity allows us to draw on the skills of a worldwide workforce, provide greater stability to our operations, drive economies of scale, provide revenue streams that may help offset economic trends that are specific to individual economies and offer an opportunity to access new markets for products. In addition, we believe that our future growth depends in part on our ability to continue developing products and sales models that successfully target high growth markets.

We estimate that annual revenue derived from customers outside the United States (based on geographic destination) as a percentage of total annual revenue was approximately 52% in 2020 and 49% in 2019.

The manner in which our products are sold outside the United States differs by business and by region. Most of our sales in non-U.S. markets are made by our subsidiaries located outside the United States, though we also sell directly from the United States into non-U.S. markets through various representatives and distributors and, in some cases, directly. In countries with low sales volumes, we generally sell through representatives and distributors.

Information about our Executive Officers

The following sets forth certain information with regard to our executive officers as of February 26, 2020 (ages are as of December 31, 2020):

Carl R. Christenson (age 61) has been our Chairman since April 2014, our Chief Executive Officer since January 2009, and a director since July 2007. Prior to his current position, Mr. Christenson served as our President and Chief Operating Officer from January 2005 to December 2008. From 2001 to 2005, Mr. Christenson was the President of Kaydon Bearings, a manufacturer of custom-engineered bearings and a division of Kaydon Corporation. Prior to joining Kaydon, Mr. Christenson held a number of management positions at TB Wood’s Incorporated and several positions at the Torrington Company. Mr. Christenson currently serves as a director at IDEX Corporation, a NYSE listed industrial manufacturer of highly engineered products. Mr. Christenson previously served as a director at Vectra Co., f/k/a OM Group, Inc., a NYSE listed technology-driven diversified industrial company, from 2014 to 2015. Mr. Christenson holds a M.S. and B.S. degree in Mechanical Engineering from the University of Massachusetts and an M.B.A. from Rensselaer Polytechnic. In addition to more than twenty-five years of experience in manufacturing companies, Mr. Christenson brings vast knowledge of the Company’s business, structure, history and culture to the Board and the CEO position.

Christian Storch (age 61) has been our Executive Vice President since December 2019 and our Chief Financial Officer since December 2007. From 2001 to 2007, Mr. Storch was the Vice President and Chief Financial Officer at Standex International Corporation (“Standex International”). Mr. Storch also served on the Board of Directors of Standex International from October 2004 to December 2007. Mr. Storch also served as Standex International’s Treasurer from 2003 to April 2006 and Manager of Corporate Audit and Assurance Services from July 1999 to 2003. Prior to Standex International, Mr. Storch was a Divisional Financial Director and Corporate Controller at Vossloh AG, a publicly held German transport technology company. Mr. Storch has also previously served as an Audit Manager with Deloitte & Touche LLP. Mr. Storch holds a degree in business administration from the University of Passau, Germany.

12

Glenn E. Deegan (age 54) has been our Executive Vice President since December 2019 and our Vice President, Legal and Human Resources, General Counsel and Secretary since June 2009. Prior to his current position, Mr. Deegan served as our General Counsel and Secretary since September 2008. From March 2007 to August 2008, Mr. Deegan served as Vice President, General Counsel and Secretary of Averion International Corp., a publicly held global provider of clinical research services. Prior to Averion, from June 2001 to March 2007, Mr. Deegan served as Director of Legal Affairs and then as Vice President, General Counsel and Secretary of MacroChem Corporation, a publicly held specialty pharmaceutical company. From 1999 to 2001, Mr. Deegan served as Assistant General Counsel of Summit Technology, Inc., a publicly held manufacturer of ophthalmic laser systems. Mr. Deegan previously spent over six years engaged in the private practice of law and also served as law clerk to the Honorable Francis J. Boyle in the United States District Court for the District of Rhode Island. Mr. Deegan holds a B.S. from Providence College and a J.D. from Boston College.

Todd B. Patriacca (age 51) has been our Vice President of Finance, Corporate Controller and Treasurer since February 2010. Prior to his current position, Mr. Patriacca served as our Vice President of Finance, Corporate Controller and Assistant Treasurer since October 2008 and previous to that, as Vice President of Finance and Corporate Controller since May 2007 and as Corporate Controller since May 2005. Prior to joining us, Mr. Patriacca was Corporate Finance Manager at MKS Instruments Inc. (“MKS”), a publicly held semi-conductor equipment manufacturer since March 2002. Prior to MKS, Mr. Patriacca spent over ten years at Arthur Andersen LLP in the Assurance Advisory practice. Mr. Patriacca is a Certified Public Accountant and holds a B.A. in History from Colby College and an M.B.A. and an M.S. in Accounting from Northeastern University.

Craig Schuele (age 57) has been our Executive Vice President since December 2019 and our Vice President of Marketing and Business Development since May 2007 and held the same position with our predecessor since July 2004. He is responsible for global marketing as well as coordinating Altra’s merger and acquisition activity.  Prior to his current position, Mr. Schuele was our Vice President of Marketing since March 2002, and previous to that he was our Director of Marketing. Mr. Schuele joined our predecessor in 1986 and holds a B.S. degree in Management from Rhode Island College.

Risks Related to our Business and Industry

We operate in the highly competitive power transmission and motion control industries and if we are not able to compete successfully our business may be significantly harmed.

We operate in highly fragmented and very competitive markets in the power transmission and motion control industries.  Some of our competitors have achieved substantially more market penetration in certain of the markets in which we operate, and some of our competitors are larger than us and have greater financial and other resources.  With respect to certain of our products, we compete with divisions of our original equipment manufacturer customers.  Competition in our business lines is based on a number of considerations, including quality, reliability, pricing, availability, and design and application engineering support.  Our customers increasingly demand a broad product range and we must continue to develop our expertise in order to manufacture and market these products successfully.  To remain competitive, regular investment in manufacturing, customer service and support, marketing, sales, research and development and intellectual property protection is required.  In the future, we may not have sufficient resources to continue to make such investments and may not be able to maintain a competitive position within each of the markets we serve.  We may have to adjust the prices of some of our products to stay competitive.  

Additionally, some of our larger, more sophisticated customers are attempting to reduce the number of vendors from which they purchase in order to increase their efficiency.  If we are not selected to become one of these preferred providers, we may lose market share in some of the markets in which we compete.  

There is substantial and continuing pressure on major original equipment manufacturers and larger distributors to reduce costs, including the cost of products purchased from outside suppliers.  As a result of cost pressures from customers, our ability to compete depends in part on their ability to generate production cost savings and, in turn, to find reliable, cost effective outside suppliers to source components or manufacture their products. If we are unable to generate sufficient cost savings in the future to offset price reductions, then our gross margin could be materially adversely affected.

Our growth could suffer if the markets in which we sell our products and services experience cyclicality.

Our growth will depend in part on the growth of the markets which we serve and on the U.S. and global economies in general.  Some of the markets Altra serves are highly cyclical, such as the class eight heavy duty truck, metals, mining and energy markets, including oil, gas and renewable energy.  In such an environment, expected cyclical activity or sales may not occur or may be delayed and may result in significant quarter-to-quarter variability in our performance. Any of these factors could adversely affect our business, financial condition and results of operations in any given period.  

13

We must continue to invest in new technologies and manufacturing techniques; however, our ability to develop or adapt to changing technology and manufacturing techniques is uncertain and our failure to do so could place us at a competitive disadvantage.

The successful implementation of our business strategy requires us to invest continuously in new technologies and manufacturing techniques to evolve our existing products and introduce new products to meet our customers’ needs in the industries we serve and want to serve.

Our products are characterized by performance and specification requirements that mandate a high degree of manufacturing and engineering expertise. We believe that our customers rigorously evaluate their suppliers on the basis of a number of factors, including:

Our success depends on our ability to invest in new technologies and manufacturing techniques to continue to meet our customers’ changing demands with respect to the above factors. We may not be able to make required capital expenditures and, even if we do so, we may be unsuccessful in addressing technological advances or introducing new products necessary to remain competitive within our markets. Furthermore, our own technological developments may not be able to produce a sustainable competitive advantage. If we fail to invest successfully in improvements to our technology and manufacturing techniques, our business may be materially adversely affected.

Our operations are subject to international risks including global commercial activities and production facilities, many of which may be located in jurisdictions that are subject to increased risks of disrupted production that could affect our operating results.

We operate businesses with manufacturing facilities worldwide, many of which are located outside the United States including in Brazil, Canada, Chile, China, Czech Republic, Denmark, France, Germany, India, Mexico, Peru, Russia, Slovakia, St. Kitts, Sweden, Turkey and the United Kingdom. Our net sales to customers outside North America represented approximately 50% of our total net sales for the year ended December 31, 2020. In addition, we sell products to domestic customers for use in their products sold overseas. We also source a significant portion of our products and materials from overseas. As a result, our business is subject to risks associated with doing business internationally, and our future results could be materially adversely affected by a variety of factors, including:

In addition, our international operations are governed by various U.S. laws and regulations, including the Foreign Corrupt Practices Act and other similar laws that prohibit us and our business partners from making improper payments or offers of payment to foreign governments and their officials and political parties for the purpose of obtaining or retaining business. Any alleged or actual violations of these regulations may subject us to government scrutiny, severe criminal or civil sanctions and other liabilities.

14

As we continue to expand our business globally, our success will depend, in large part, on our ability to anticipate and effectively manage these and other risks associated with our international operations. However, any of these factors could materially adversely affect our international operations and, consequently, our operating results.

We rely on distributors and the loss of these distributors could adversely affect our business.

In addition to our direct sales force and manufacturer sales representatives, we depend on the services of distributors to sell our products and provide service and aftermarket support to our customers. We support an extensive distribution network, with over 3,000 distributor locations worldwide. During the year ended December 31, 2020, approximately 24% of our net sales from operations were generated through distributors. Almost all of the distributors with whom we transact business offer competitive products and services to our customers. In addition, the distribution agreements we have are typically non-exclusive and cancelable by the distributor after a short notice period. The loss of any major distributor or a substantial number of smaller distributors or an increase in the distributors’ sales of our competitors’ products to our customers could materially reduce our sales and profits.

We rely on estimated forecasts of our OEM customers’ needs, and inaccuracies in such forecasts could materially adversely affect our business.

We generally sell our products pursuant to individual purchase orders instead of under long-term purchase commitments. Therefore, we rely on estimated demand forecasts, based upon input from our customers, to determine how much material to purchase and product to manufacture. Because our sales are based on purchase orders, our customers may cancel, delay or otherwise modify their purchase commitments with little or no consequence to them and with little or no notice to us. For these reasons, we generally have limited visibility regarding our customers’ actual product needs. The quantities or timing required by our customers for our products could vary significantly. Whether in response to changes affecting the industry or a customer’s specific business pressures, any cancellation, delay or other modification in our customers’ orders could significantly reduce our revenue, impact our working capital, cause our operating results to fluctuate from period to period and make it more difficult for us to predict our revenue. In the event of a cancellation or reduction of an order, we may not have enough time to reduce operating expenses to minimize the effect of the lost revenue on our business and we may purchase too much inventory and spend more capital than expected, which may materially adversely affect our business.

From time to time, our customers may experience deterioration of their businesses. In addition, during periods of economic difficulty, our customers may not be able to accurately estimate demand forecasts and may scale back orders in an abundance of caution. As a result, existing or potential customers may delay or cancel plans to purchase our products and may not be able to fulfill their obligations to us in a timely fashion. Such cancellations, reductions or inability to fulfill obligations could significantly reduce our revenue, impact our working capital, cause our operating results to fluctuate adversely from period to period and make it more difficult for us to predict our revenue.

Disruption of our supply chain and COVID-19 related shutdowns of our suppliers’ operations and our operations could have an adverse effect on our business, financial condition and results of operations.

Our ability, including manufacturing or distribution capabilities, and that of our suppliers, business partners and contract manufacturers, to make, move and sell products is critical to our success. Damage or disruption to our or their manufacturing or distribution capabilities due to weather, natural disaster, fire or explosion, terrorism, pandemics, strikes, repairs or enhancements at our facilities, excessive demand, raw material shortages, or other reasons, could impair our ability, and that of our suppliers, to manufacture or sell our products. Failure to take adequate steps to mitigate the likelihood or potential impact of such events, or to effectively manage such events if they occur, could adversely affect our business, financial condition and results of operations, as well as require additional resources to restore our supply chain.

COVID-19 was declared a pandemic by the World Health Organization on March 12, 2020. Many countries where we do business, including the United States, many E.U. countries, the United Kingdom, Canada and China, have imposed restrictions on travel and business operations resulting in a substantial reduction of economic activity. Additionally, these restrictions have had and may continue to have a negative effect on the capacity of ports and terminals to process and accommodate commercial activity.  The duration of the production and supply chain disruptions, and related financial impact, cannot be estimated at this time. In an effort to contain the spread of the virus and maintain the wellbeing of our employees, and in accordance with governmental requirements, we have experienced temporary closures at certain production facilities and we have been required to operate some production facilities at reduced capacity.  In addition, our suppliers, business partners and customers are also experiencing similar negative impacts from the COVID-19 pandemic. Should the production and distribution delays and closures continue for an extended period of time this could have a material adverse effect on our results of operations and cash flows.

The materials used to produce our products are subject to price fluctuations and or ability to obtain those products and negotiate profitable agreements with our suppliers that could increase costs of production and adversely affect our profitability.

The materials used to produce our products, especially aluminum, copper and steel, are sourced on a global or regional basis and the prices of those materials are susceptible to price fluctuations due to supply and demand trends, transportation costs, government regulations and tariffs, changes in currency exchange rates, price controls, the economic climate and other unforeseen circumstances. If we are unable to continue to pass a substantial portion of such price increases on to our customers on a timely basis, our future profitability may be materially adversely affected. In addition, passing through these costs to our customers may also limit our ability to increase our prices in the future.

15

Our ability to maintain and expand our business depends, in part, on our ability to continue to obtain raw materials and component parts on favorable terms from various suppliers. If we are required to purchase raw materials or component parts subject to agreements the provide less favorable terms, the costs of providing our products may increase, which could decrease our profitability and have a material adverse effect on our business, financial condition and results of operations.

We may be subject to work stoppages at our facilities, or our customers may be subjected to work stoppages, which could seriously impact our operations and the profitability of our business.

As of December 31, 2020, we employed approximately 9,100 people on a full-time basis, of whom approximately 3,500 were employed in the United States and approximately 5,600 were employed outside of the United States. Of our United States employees, approximately 650 were hourly-rated, unionized employees. Outside the United States, we have government-mandated collective bargaining arrangements and union contracts in certain countries, particularly in Europe where certain of our employees are represented by unions and/or works councils.

The Company believes that its relationship with employees is good. However, we are party to several U.S. and international collective bargaining arrangements and union contracts, and we may be unable to renew these agreements on terms that are satisfactory to us, if at all.

If our unionized workers or those represented by a works council were to engage in a strike, work stoppage or other slowdown in the future, we could experience a significant disruption of our operations. Such disruption could interfere with our ability to deliver products on a timely basis and could have other negative effects, including decreased productivity and increased labor costs. In addition, if a greater percentage of our work force becomes unionized, our business and financial results could be materially adversely affected. Moreover, many of our direct and indirect customers have unionized work forces. Strikes, work stoppages or slowdowns experienced by these customers or their suppliers could result in slowdowns or closures of assembly plants where our products are used and could cause cancellation of purchase orders with us or otherwise result in reduced revenues from these customers.

Due to the COVID-19 pandemic, we may continue to experience reduced capacity operations and work stoppages at certain facilities resulting from employee absenteeism due to illness and compliance with quarantine requirements imposed by governmental authorities and Company policy.  In addition, customers may experience similar negative impacts from the COVID-19 pandemic.  Reduced capacity operations, work stoppages and decreased customer operations resulting from these events could impact the Company’s operations and have a material adverse effect on our results of operations and cash flows.

We depend on the services of key executives, the loss of whom could materially harm our business.

Our senior executives are important to our success because they are instrumental in setting our strategic direction, operating our business, maintaining and expanding relationships with distributors, identifying, recruiting and training key personnel, identifying expansion opportunities and arranging necessary financing. Losing the services of any of these individuals could adversely affect our business until a suitable replacement could be found. We believe that our senior executives could not easily be replaced with executives of equal experience and capabilities but we cannot prevent our key executives from terminating their employment with us. We do not maintain key person life insurance policies on any of our executives.

If we lose certain of our key sales, marketing, skilled machinist, or engineering personnel, our business may be adversely affected.

Our success depends on our ability to recruit, retain and motivate highly skilled sales, marketing, skilled machinist and engineering personnel. Competition for these persons in our industry is intense and we may not be able to successfully recruit, train or retain qualified personnel in the event scarcity continues or increases. If we fail to recruit and retain the necessary personnel, our business and our ability to obtain new customers, develop new products and provide acceptable levels of customer service could suffer. If certain of these key personnel were to terminate their employment with us, we may experience difficulty replacing them, and our business could be harmed.

We may not be able to protect our intellectual property rights, brands or technology effectively, which could allow competitors to duplicate or replicate our technology and could adversely affect our ability to compete.

We rely on a combination of patent, trademark, copyright and trade secret laws in the United States and other jurisdictions, as well as on license, non-disclosure, employee and consultant assignment and other agreements and domain name registrations in order to protect our proprietary technology and rights. Applications for protection of our intellectual property rights may not be allowed, and the rights, if granted, may not be maintained. In addition, third parties may infringe or challenge our intellectual property rights. In some cases, we rely on unpatented proprietary technology. It is possible that others will independently develop the same or similar technology or otherwise obtain access to our unpatented technology. Further, in the ordinary course of our operations, we pursue potential claims from time to time relating to the protection of certain products and intellectual property rights, including with respect to some of our more profitable products. Such claims could be time-consuming, expensive and divert resources. If we are unable to maintain the proprietary nature of our technologies or proprietary protection of our brands, our ability to market or be competitive with respect to some or all of our products may be affected, which could reduce our sales and profitability.  See “Business— Intellectual Property”.

16

Unplanned repairs or equipment outages could interrupt production and reduce income or cash flow.

Unplanned repairs or equipment outages, including those due to natural disasters, could result in the disruption of our manufacturing processes. Any interruption in our manufacturing processes would interrupt our production of products, reduce our income and cash flow and could result in a material adverse effect on our business and financial condition.

Our operations are highly dependent on information technology infrastructure, including Enterprise Resource Planning systems,  and failures in such infrastructure and failure to comply with data privacy laws or regulations could significantly affect our business.

We depend heavily on our information technology, or IT, infrastructure in order to achieve our business objectives both in our everyday business operations and during our integration efforts related to acquisitions. If we experience a problem that impairs this infrastructure, such as a computer virus, natural disaster, act of terrorism, cyber-attack, electrical/telecommunications outage, malware, phishing, other intentional disruption, tampering or manipulation of our IT systems by an employee or unauthorized third party, or failure or other problem with the functioning of an important IT application, or if our third party software vendors discontinue further development, integration or long-term software maintenance support for our information systems, the resulting disruptions could impede our ability to record or process orders, manufacture and ship in a timely manner, or otherwise carry on our business in the ordinary course. Any such events could cause us to lose revenue, could harm our relationships with or cause us to lose customers or suppliers, and could require us to incur significant expense to eliminate these problems and address related security concerns. Information security risks also exist with respect to the use of portable electronic devices, such as smartphones and laptops, which are particularly vulnerable to loss and theft.

Cyber-attacks from computer hackers and cyber criminals and other malicious Internet-based activity continue to increase generally, and perpetrators of cyber-attacks may be able to develop and deploy viruses, worms, ransomware, malware, DNS attacks, wireless network attacks, phishing attempts, distributed denial of service attacks and other malicious software programs that target our IT infrastructure and our networks, and those of our suppliers. These cyber-attacks may expose us to a variety of risks, including a risk of theft of substantial assets including cash. In addition, a cyber-attack may cause additional costs, such as investigative and remediation costs, and the costs of providing our suppliers, customers, or other potentially affected parties with notice of the breach, legal fees and the costs of any additional fraud detection activities required by law, a court or a third-party.

Techniques used to obtain unauthorized access or to sabotage systems, to impersonate, or to otherwise seek to perpetrate fraudulent acts against commercial parties change frequently, are increasingly sophisticated and generally are not recognized until launched against a target. As a result, we may be unable to anticipate these techniques or to implement adequate preventative measures. We cannot be certain that advances in cyber-capabilities or other developments will not compromise or breach the technology protecting our IT infrastructure and networks or our industrial machinery, software or hardware, and we can make no assurance that we will be able to detect, prevent, timely and adequately address or mitigate the negative effects of cyber-attacks or other security breaches. If such events affect our systems or products, our reputation and brand names could be materially damaged and use of our products may decrease. Additionally, a significant portion of our workforce is working remotely due the COVID-19 pandemic, which may increase these risks. The measures we have taken steps to maintain adequate cyber security and address these risks and uncertainties may be inadequate.

We are also subject to an increasing number of evolving data privacy and security laws and regulations that impose requirements on us and our technology prior to certain transfer, storage, use, processing, or disclosure of data and prior to sale or use of certain technologies. Failure to comply with such laws and regulations could result in the imposition of fines, penalties and other costs. For example, the European Union’s implementation of the General Data Protection Regulation in 2018, the European Union’s pending ePrivacy Regulation, the implementation of the ePrivacy Directive by the various European Union member states, and California’s implementation of its Consumer Privacy Act of 2018 and Connected Device Privacy Act of 2018, as well as data privacy statutes implemented by other states, could all disrupt our ability to sell products and solutions or use and transfer data because such activities may not be in compliance with applicable law in certain jurisdictions.

We are in the process of implementing enhancements to our Enterprise Resource Planning systems and other business systems (collectively referred to as “ERP”), with the aim of enabling management to achieve better control across our business operations. If the remaining implementation of the enhancements is delayed, in whole or in part, our current ERP systems may not be sufficient to support our planned operations and certain ERP systems may become obsolete. There can be no assurance that the enhancements to our ERP systems will be successfully implemented and failure to do so could have a material adverse effect on our operations.  The occurrence of any of these events or other unanticipated problems with our ERP systems could disrupt the management of, and have a material adverse effect on, our business operations.

If any one of these risks materializes, our business, financial condition, cash flows or results of operations could be materially and adversely affected.

17

Certain of our businesses are exposed to renewable energy markets which depend significantly on the availability and size of government subsidies and economic incentives.

Certain of our businesses sell products to customers within the renewable energy market, which among other energy sources includes wind energy and solar energy. This market is inherently cyclical and can be impacted by governmental policy, the comparative cost differential between various forms of energy, and the general macroeconomic climate.  

At present, the cost of many forms of renewable energy may exceed the cost of conventional power generation in locations around the world. Various governments have used different policy initiatives to encourage or accelerate the development and adoption of renewable energy sources such as wind energy and solar energy. Renewable energy policies are in place in China and the United States. Examples of government sponsored financial incentives include capital cost rebates, feed-in tariffs, tax credits, net metering and other incentives to end-users, distributors, system integrators and manufacturers of renewable energy products to promote the use of renewable energy and to reduce dependency on other forms of energy. Governments may decide to reduce or eliminate these economic incentives for political, financial or other reasons. Reductions in, or eliminations of, government subsidies and economic incentives could reduce demand for our products and, as our customers attempt to compete on a levelized playing field with other forms of nonrenewable energy, also increase pressure to reduce cost throughout the supply chain.  Lower demand or increased pricing pressure could adversely affect our business prospects and results of operations.

We may not be able to achieve the efficiencies, savings and other benefits anticipated from our cost reduction, margin improvement and other business optimization initiatives.

We have in the past undertaken and expect to continue to undertake various restructuring activities and cost reduction initiatives in an effort to better align our organizational structure and costs with our strategy. We cannot assure you that we will be able to achieve all of the cost savings that we expect to realize from current or future activities and initiatives.  Furthermore, in connection with these activities, we may experience a disruption in our ability to perform functions important to our strategy. Unexpected delays, increased costs, challenges with adapting our internal control environment to a new organizational structure, inability to retain and motivate employees or other challenges arising from these initiatives could adversely affect our ability to realize the anticipated savings or other intended benefits of these activities and could have a material adverse impact on our financial condition and operating results.

Financial Risks

Global economic changes or continued volatility and disruption in global financial markets could significantly impact our customers and suppliers, weaken the markets we serve and harm our operations and financial performance.

Global economic and financial market conditions have been weak and/or volatile in recent years, and those conditions have adversely affected our business operations and are expected to continue to adversely affect our business. The prospective impact of the COVID-19 pandemic on the global economy as a whole will depend on future events.  The duration of the pandemic cannot be predicted, and it is unknown when or if economic activity will return to prior levels.  A weakening of current conditions or a future downturn may adversely affect our future results of operations and financial condition. Weak, challenging or volatile economic conditions in the end markets, businesses or geographic areas in which we sell our products could reduce demand for products and result in a decrease in sales volume for a prolonged period of time, which would have a negative impact on our future results of operations.

Adverse conditions in the credit and capital markets may limit or prevent our and our customers’ and suppliers’ ability to borrow or raise capital, which could harm our operations and financial performance.

Adverse conditions in the credit and financial markets could prevent us from obtaining financing, if the need arises. Our ability to invest in our global business and refinance or repay maturing debt obligations could require access to the credit and capital markets and sufficient bank credit lines to support cash requirements. If we are unable to access the credit and capital markets on commercially reasonable terms, we could experience a material adverse effect on our business, financial position or results of operations.

Deterioration in financial markets and confidence in major economies could impair our ability to access credit markets and finance our operations. In addition, a tight credit market may adversely affect the ability of our customers to obtain financing for significant purchases and operations and could result in a decrease in or cancellation of orders for our products and services as well as impact the ability of our customers to make payments. Similarly, a tight credit market may adversely affect our supplier base and increase the potential for one or more of our suppliers to experience financial distress or bankruptcy. These conditions would harm our business by adversely affecting our sales, results of operations, profitability, cash flows, financial condition and long-term anticipated growth rate, which could result in potential impairment of certain long-term assets including goodwill.

Goodwill and indefinite-lived intangibles comprises a significant portion of our total assets, and if we determine that goodwill or indefinite-lived intangibles become impaired in the future, net income in such years may be materially and adversely affected.

Goodwill represents the excess of cost over the fair market value of net assets acquired in business combinations. Due to the acquisitions we have completed historically, goodwill comprises a significant portion of our total assets. In addition, indefinite lived intangibles, primarily tradenames and trademarks, comprise a significant portion of our total assets. We review goodwill and indefinite-lived intangibles annually for impairment and any excess in carrying value over the estimated fair value is charged to the results of operations. Future reviews of goodwill and indefinite lived intangibles could result in future reductions. Any reduction in net

18

income resulting from the write down or impairment of goodwill and indefinite-lived intangibles could adversely affect our financial results. If economic conditions deteriorate we may be required to impair goodwill and indefinite-lived intangibles in future periods.

Our leverage could adversely affect our financial health and make us vulnerable to adverse economic and industry conditions.

As of December 31, 2020, we had approximately $1,030.0 million outstanding and $295.5 million available under our Altra Revolving Credit Facility (as defined herein). In addition, as of December 31, 2020, we had approximately $400 million outstanding under the Notes (as defined herein). Our indebtedness has important consequences; for example, it could:

Substantially all of the domestic personal property of Altra and our domestic subsidiaries and certain shares of certain non-domestic subsidiaries have been pledged as collateral against any outstanding borrowings under the Credit Agreement dated October 1, 2018 (as amended from time to time, the “Altra Credit Agreement”) governing the Altra Revolving Credit Facility. In addition, the Altra Credit Agreement requires us to maintain specified financial ratios and satisfy certain financial condition tests, which may require that we take action to reduce our debt or to act in a manner contrary to our business objectives.

In the future, the then current economic and credit market conditions may limit our access to additional capital, to the extent that the Altra Credit Agreement would otherwise permit additional financing, or may preclude our ability to refinance our existing indebtedness. There can be no assurance that there will not be a deterioration in the credit markets, a deterioration in the financial condition of our lenders or their ability to fund their commitments or, if necessary, that we will be able to find replacement financing, if need be, on similar or acceptable terms. An inability to access sufficient financing or capital could have an adverse impact on our operations and thus on our operating results and financial position.

The Altra Credit Agreement imposes significant operating and financial restrictions, which may prevent us from pursuing our business strategies or favorable business opportunities.

Subject to a number of important exceptions, under the Altra Credit Agreement we are subject to customary affirmative and negative covenants, such as limitations on:

The restrictions contained in the Altra Credit Agreement may prevent us from taking actions that we believe would be in the best interest of our business and may make it difficult for us to successfully execute our business strategy or effectively compete with companies that are not similarly restricted. A breach of any of these covenants or the inability to comply with the required financial ratios could result in a default under the Altra Credit Agreement. If any such default occurs, the lenders under the Altra Credit Agreement may elect to declare all of the outstanding debt under the Altra Credit Agreement, together with accrued interest and other amounts payable thereunder, to be immediately due and payable. The lenders under the Altra Credit Agreement also have the right in those circumstances to terminate any commitments they have to provide further borrowings. In addition, following an event of default under the Altra Credit Agreement, the lenders under the Altra Credit Agreement will have the right to proceed against the collateral that secures the debt. If the debt under the Altra Credit Agreement were to be accelerated, we may not have the ability to refinance that debt, and if we can, the terms of such refinancing may be less favorable than the current financing terms under the Altra Credit Agreement. In the event that the indebtedness is accelerated, our assets may not be sufficient to repay in full all of our debt.

19

The Altra Revolving Credit Facility contains certain financial maintenance covenants requiring Altra to not exceed a maximum consolidated senior secured net leverage ratio and to maintain a minimum consolidated cash interest coverage ratio.  There can be no assurance that we will be able to remain in compliance with these ratios.  If we fail to comply with either of these covenants in a future period and are not able to obtain waivers from the lenders thereunder, we would need to refinance the Altra Revolving Credit Facility.  However, there can be no assurance that such refinancing would be available on terms that would be acceptable to us or at all.

Our exposure to variable interest rates, foreign currency exchange rates and swap counter party credit risk could materially and adversely affect or business, operating results, and financial condition.

We are exposed to various types of market risk in the normal course of business, including the impact of interest rate changes and foreign currency exchange rate fluctuations. Some of our indebtedness bears interest at variable rates, generally linked to market benchmarks such as LIBOR. Any increase in interest rates would increase our finance expenses relating to our variable rate indebtedness and increase the costs of refinancing our existing indebtedness and issuing new debt. In addition, in July 2017, the U.K.’s Financial Conduct Authority, which regulates LIBOR, announced its intent to phase out LIBOR by the end of 2021. It is not possible to predict the effect of this announcement, including whether LIBOR will continue in place, and if so what changes will be made to it, what alternative reference rates may replace LIBOR in use going forward and how LIBOR will be determined for purposes of loans, securities and derivative instruments currently referencing it if it ceases to exist.  If the method for calculation of LIBOR changes, if LIBOR is no longer available or if lenders have increased costs due to changes in LIBOR, we may suffer from potential increases in interest rates on our floating debt rate. Further, we may need to renegotiate our indebtedness documents to replace LIBOR with the new standard that is established. These uncertainties or their resolution also could negatively impact our funding costs, loan and other asset values, asset-liability management strategies and other aspects of our business and financial results.  In addition, we conduct our business and incur costs in the local currency of the countries in which we operate. As we continue expanding our business into markets such as Europe, China, Australia, India and Brazil, we expect that an increasing amount of our revenue and cost of sales will be denominated in currencies other than the U.S. Dollar, our reporting currency. As a result, we are subject to currency translation risk, whereby changes in exchange rates between the dollar and the other currencies in which we borrow and do business could result in foreign exchange losses and have a material adverse effect on our results of operations.

From time to time, we rely on interest rate swap contracts and cross-currency swap contracts and hedging arrangements to effectively manage our interest rate and currency risk. Failure to perform under derivatives contracts by one or more of our counterparties could disrupt our hedging operations, particularly if we were entitled to a termination payment under the terms of the contract that we did not receive, if we had to make a termination payment upon default of the counterparty, or if we were unable to reposition the swap with a new counterparty.

Changes in accounting standards could affect our financial results.

The Company’s accounting and financial reporting policies conform to U.S. generally accepted accounting principles (“GAAP”), which are periodically revised and/or expanded.  The application of accounting principles is also subject to varying interpretations over time.  Accordingly, the Company is required to adopt new or revised accounting standards or comply with revised interpretations that are issued from time to time by various parties, including accounting standard setters and those who interpret the standards, such as the Financial Accounting Standards Board (the “FASB”) and the Securities and Exchange Commission.  Such new financial accounting standards may change the financial accounting or reporting standards that govern the preparation of the Company’s consolidated financial statements.  Implementing changes required by new standards, requirements or laws require interpretation of rules and development of new accounting policies and internal controls that if not appropriately applied could result in financial statement errors, deficiencies in internal control as well as significant costs to implement.

Legal and Compliance Risks

Changes to U.S. trade policy, tariff and import/export regulations and foreign government regulations could adversely affect our business, operating results, foreign operations, sourcing and financial condition.

Changes in U.S. or international social, political, regulatory and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment in the territories or countries where we currently sell our products or conduct our business, as well as any negative sentiment toward the U.S. as a result of such changes, could adversely affect our business. New tariffs and other changes in U.S. trade policy have the potential to adversely impact the U.S. economy or certain sectors thereof, our industry and the global demand for our products, and as a result, could have a material adverse effect on our business, operating results and financial condition. In addition, we cannot predict what changes to trade policy will be made by the new U.S. presidential administration and Congress, including whether existing trade policies will be maintained or modified or whether the entry into new bilateral or multilateral trade agreements will occur, nor can we predict the effects that any conceivable changes would have on our business.

Our businesses are subject to risks generally associated with doing business abroad, including foreign governmental regulation in the countries in which several of our manufacturing sources and facilities are located, such as Brazil, Canada, Chile, China, Czech Republic, Denmark, France, Germany, India, Mexico, Slovakia, St. Kitts, Sweden, Turkey and the United Kingdom (the “U.K.”). We believe that the issue of foreign governmental regulations that would impact our arrangements with our foreign manufacturing sources is of particular concern with regard to countries such as China due to the less mature nature of the Chinese market economy and the

20

historical involvement of the Chinese government in industry. Additionally, we are subject to risks due to uncertainties related to the potential impact of the U.K.’s exit from the E.U. (Brexit) on the Company’s business operations in the U.K. and Europe, which will vary depending on the final terms of the transition. If regulations were to render the conduct of business in a particular country undesirable or impracticable, if our current foreign manufacturing sources were for any other reason to cease doing business with us, or if we were in a position where we needed to relocate our manufacturing facilities due to regulations or other similar circumstances, such a development could have a material adverse effect on our product sales and on our supply, manufacturing, and distribution channels.

Our business is also subject to risks associated with U.S. and foreign legislation and regulations relating to imports, including quotas, duties, tariffs or taxes, and other charges or restrictions on imports, which could adversely affect our operations and our ability to import products at current or increased levels, and substantially all of our import operations are subject to customs duties on imported products imposed by the governments where our production facilities are located, including raw materials. We cannot predict whether additional U.S. and foreign customs quotas, duties (including antidumping or countervailing duties), tariffs, taxes or other charges or restrictions, requirements as to where raw materials must be purchased, reporting obligations pertaining to “conflict minerals” mined from certain countries, additional workplace regulations, or other restrictions on our imports will be imposed upon the importation of our products in the future or adversely modified, or what effect such actions would have on our costs of operations. For example, our products that are imported to the United States are subject to U.S. customs duties and, in the ordinary course of our business, we may from time to time be subject to claims by the U.S. Customs Service for duties and other charges. Factors that may influence the modification or imposition of these restrictions include the determination by the U.S. Trade Representative that a country has denied adequate intellectual property rights or fair and equitable market access to U.S. firms that rely on intellectual property, trade disputes between the United States and a country that leads to withdrawal of "most favored nation" status for that country, and economic and political changes within a country that are viewed unfavorably by the U.S. government. Future quotas, duties, or tariffs may have a material adverse effect on our business, financial condition, and results of operations. Future trade agreements could also provide our competitors with an advantage over us, or increase our costs, either of which could have a material adverse effect on our business, financial condition, and results of operations.

Product defects, quality issues, inadequate disclosures, misuse and potential product liability claims in relation to the products we manufacture or distribute could result in reputational harm and our having to expend significant time and expense to defend these claims and to pay material damages or settlement amounts.

Defects in, quality issues with respect to, or inadequate disclosure of risks relating to our products or the misuse of our products, could lead to lost profits and other economic damage, property damage, personal injury or other liability resulting in third-party claims, criminal liability, significant costs, damage to our reputation and loss of business. Any of these factors could adversely affect our business, financial condition and results of operations.

We face a business risk of exposure to product liability claims in the event that the use of our products is alleged to have resulted in injury or other adverse effects. We currently have several product liability claims against us with respect to our products. We may not be able to obtain product liability insurance on acceptable terms in the future, if at all, or obtain insurance that will provide adequate coverage against potential claims. Product liability claims can be expensive to defend and can divert the attention of management and other personnel for long periods of time, regardless of the ultimate outcome. An unsuccessful product liability defense could exceed any insurance that we maintain and could have a material adverse effect on our business, financial condition, results of operations or our ability to make payments under our debt obligations when due. In addition, we believe our business depends on the strong brand reputation we have developed. In the event that our reputation is damaged, we may face difficulty in maintaining our pricing positions with respect to some of our products, which would reduce our sales and profitability.

We also risk exposure to product liability claims in connection with products sold by businesses that we acquire. We cannot assure you that third parties that have retained responsibility for product liabilities relating to products manufactured or sold prior to our acquisition of the relevant business, or persons from whom we have acquired a business that are required to indemnify us for certain product liability claims subject to certain caps or limitations on indemnification, will in fact satisfy their obligations to us with respect to liabilities retained by them or their indemnification obligations. If those third parties become unable to or otherwise do not comply with their respective obligations including indemnity obligations, or if certain product liability claims for which we are obligated were not retained by third parties or are not subject to these indemnities, we could become subject to significant liabilities or other adverse consequences. Moreover, even in cases where third parties retain responsibility for product liabilities or are required to indemnify us, significant claims arising from products that we have acquired could have a material adverse effect on our ability to realize the benefits from an acquisition, could result in our reducing the value of goodwill that we have recorded in connection with an acquisition, or could otherwise have a material adverse effect on our business, financial condition, or results of operations.

We may be subject to litigation for a variety of claims, which could adversely affect our business, financial condition or results of operations.

In addition to product liability claims and securities class action litigation, which has often been brought against a company following a decline in the market price of its securities, we and our directors and officers may be subject to claims arising from our normal business activities.  These may include claims, suits, and proceedings involving stockholder and fiduciary matters, intellectual property, labor and employment, wage and hour, commercial and other matters.  The outcome of any litigation, regardless of its merits, is inherently uncertain.  Any claims and lawsuits, and the disposition of such claims and lawsuits, could be time-consuming and expensive to resolve, divert management attention and resources, and lead to attempts on the part of other parties to pursue similar

21

claims.  Any adverse determination related to litigation or settlement or other resolution of a legal matter could adversely affect our business, financial condition or results of operations, harm our reputation or otherwise negatively impact our business.  

Changes in labor or employment laws could increase our costs and may adversely affect our business.

Various federal, state and international labor and employment laws govern our relationship with employees and affect operating costs. These laws include minimum wage requirements, overtime, unemployment tax rates, workers’ compensation rates paid, leaves of absence, mandated health and other benefits, and citizenship requirements. Significant additional government-imposed increases or new requirements in these areas could materially affect our business, financial condition, operating results or cash flow.

In the event our employee-related costs rise significantly, we may have to curtail the number of our employees or shut down certain manufacturing facilities. Any such actions would not only be costly but could also materially adversely affect our business.

We are subject to environmental laws that could impose significant costs on us and the failure to comply with such laws could subject us to sanctions and material fines and expenses.

We are subject to a variety of federal, state, local, foreign and provincial environmental laws and regulations, including those governing the discharge of pollutants into the air or water, the management and disposal of hazardous substances and wastes and the responsibility to investigate and clean up contaminated sites that are or were owned, leased, operated or used by us or our predecessors. Some of these laws and regulations require us to obtain permits, which contain terms and conditions that impose limitations on our ability to emit and discharge hazardous materials into the environment and periodically may be subject to modification, renewal and revocation by issuing authorities. Fines and penalties may be imposed for non-compliance with applicable environmental laws and regulations and the failure to have or to comply with the terms and conditions of required permits. From time to time, our operations may not be in full compliance with the terms and conditions of our permits. The operation of manufacturing plants entails risks related to compliance with environmental laws, requirements and permits, and a failure by us to comply with applicable environmental laws, regulations, or permits could result in civil or criminal fines, penalties, enforcement actions, third party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures, including the installation of pollution control equipment or remedial actions. Moreover, if applicable environmental laws and regulations, or the interpretation or enforcement thereof, become more stringent in the future, we could incur capital or operating costs beyond those currently anticipated.

Certain environmental laws in the United States, such as the federal Superfund law and similar state laws, impose liability for the cost of investigation or remediation of contaminated sites upon the current or, in some cases, the former site owners or operators and upon parties who arranged for the disposal of wastes or transported or sent those wastes to an off-site facility for treatment or disposal, regardless of when the release of hazardous substances occurred or the lawfulness of the activities giving rise to the release. Such liability can be imposed without regard to fault and, under certain circumstances, can be joint and several, resulting in one party being held responsible for the entire obligation. As a practical matter, however, the costs of investigation and remediation generally are allocated among the viable responsible parties on some form of equitable basis. Liability also may include damages to natural resources. In addition, from time to time, we are notified that we are a potentially responsible party and may have liability in connection with off-site disposal facilities. There can be no assurance that we will be able to resolve pending and future matters relating to off-site disposal facilities at all or for nominal sums.

There is contamination at some of our current facilities, primarily related to historical operations at those sites, for which we could be liable for the investigation and remediation under certain environmental laws. The potential for contamination also exists at other of our current or former sites, based on historical uses of those sites. Our costs or liability in connection with potential contamination conditions at our facilities cannot be predicted at this time because the potential existence of contamination has not been investigated or not enough is known about the environmental conditions or likely remedial requirements. Currently, with respect to certain of our facilities, other parties with contractual liability are addressing or have plans or obligations to address those contamination conditions that may pose a material risk to human health, safety or the environment. In addition, there may be environmental conditions currently unknown to us relating to our prior, existing or future sites or operations or those of predecessor companies whose liabilities we may have assumed or acquired which could have a material adverse effect on our business.

We are being indemnified, or expect to be indemnified by third parties, subject to certain caps or limitations on the indemnification, for certain environmental costs and liabilities associated with certain owned or operated sites. We cannot assure you that third parties who indemnify or who are expected to indemnify us for certain environmental costs and liabilities associated with certain owned or operated sites will in fact satisfy their indemnification obligations. If those third parties become unable to, or otherwise do not, comply with their respective indemnity obligations, or if certain contamination or other liability for which we are obligated is not subject to these indemnities, we could become subject to significant liabilities.

We or our products could infringe on the intellectual property of others, which may cause us to engage in costly litigation and, if we are not successful, could cause us to pay substantial damages and prohibit us from selling our products.

Third parties may assert infringement or other intellectual property claims against us based on their patents or other intellectual property claims, and we may have to pay substantial damages, possibly including treble damages, if it is ultimately determined that our products infringe. We may have to obtain a license to sell our products if it is determined that our products

22

infringe upon another party’s intellectual property. We might be prohibited from selling our products before we obtain a license, which, if available at all, may require us to pay substantial royalties. Even if infringement claims against us are without merit, defending these types of lawsuits takes significant time, may be expensive and may divert management attention from other business concerns.

We are subject to tax laws and regulations in many jurisdictions and the inability to successfully defend claims from taxing authorities related to our current or acquired businesses could adversely affect our operating results and financial position.

We conduct business in many countries, which requires us to interpret the income tax laws and rulings in each of those taxing jurisdictions. Due to the subjectivity of tax laws between those jurisdictions as well as the subjectivity of factual interpretations, our estimates of income tax liabilities may differ from actual payments or assessments. Claims from taxing authorities related to these differences could have an adverse impact on our operating results and financial position.  Moreover, changes to tax laws and regulations in the U.S. or other countries where we do business could have an adverse effect on our operating results and financial position.

Changes in our tax rates or exposure to additional income tax liabilities or assessments could significantly affect our profitability. In addition, audits by tax authorities could result in additional tax payments for prior periods.

We are subject to income taxes in the U.S. and in numerous non-U.S. jurisdictions. Legislation signed into law on December 22, 2017 (the “2017 Tax Act”) significantly reformed the Internal Revenue Code of 1986, as amended (the “Code”). The U.S. Treasury Department and IRS continue to issue guidance with respect to implementing the 2017 Tax Act and further regulations are expected to be issued.  As a result, aspects of the overall impact of the federal tax law remain uncertain. The impact of the 2017 Tax Act, as well as other tax laws and regulations in the U.S. or other countries where we do business, is uncertain and our business and financial condition could be adversely affected.

Due to the potential for changes to tax laws and regulations or changes to the interpretation thereof (including regulations and interpretations pertaining to the 2017 Tax Act), the ambiguity of tax laws and regulations, the subjectivity of factual interpretations, the complexity of our intercompany arrangements, uncertainties regarding the geographic mix of earnings in any particular period, and other factors, our estimates of effective tax rate and income tax assets and liabilities may be incorrect and our financial statements could be adversely affected. The impact of these factors referenced in the first sentence of this paragraph may be substantially different from period-to-period. 

In addition, the amount of income taxes we pay is subject to ongoing audits by U.S. federal, state and local tax authorities and by non-U.S. tax authorities. If audits result in payments or assessments different from our reserves, our future results may include unfavorable adjustments to our tax liabilities and our financial statements could be adversely affected.  Any further significant changes to the tax system in the United States or in other jurisdictions (including changes in the taxation of international income as further described below) could adversely affect our financial statements.

The market price of our common stock may fluctuate with market volatility.

The market price of our common stock has been volatile and may continue to fluctuate in response to a number of factors, some of which are beyond our control. The stock market in general, and the market prices of stocks of industrial companies in particular, have experienced significant price volatility that has adversely affected, and may continue to adversely affect, the market price of our common stock for reasons unrelated to our business or operating results. Broad market fluctuations could adversely affect the market price of our common stock, which in turn could cause impairment of goodwill that could materially and adversely impact our financial condition and results of operations.

It is not uncommon when the market price of a stock has been volatile for holders of that stock to institute securities class action litigation against the company that issues that stock. If any of our stockholders brought such a lawsuit against us, even if the lawsuit is without merit, we could incur substantial costs defending the lawsuit beyond any insurance coverage which we may have for such risks. Such a lawsuit could also divert the time and attention of our management. Any of these events, as well as other circumstances discussed in these Risk Factors, may cause the market price of our common stock to fall.

Risks Related to Strategic Transactions

23

Our acquisition of businesses, and strategic relationships, or our failure to successfully integrate such transactions into our business, could adversely affect our future results and the market price of our common stock.

As part of our growth strategy, we have made and expect to continue to make, acquisitions. Our continued growth may depend on our ability to identify and acquire companies that complement or enhance our business on acceptable terms. We may not be able to identify or complete future acquisitions. We may not be able to integrate successfully our recent and past acquisitions, including the Fortive Transaction, or any future acquisitions, operate any acquired companies profitably or realize the potential benefits from these acquisitions.

These acquisitions and strategic relationships involve a number of financial, accounting, managerial, operational, legal, compliance and other risks and challenges, including the following, any of which could adversely affect our future results and the market price of our common stock:

We continually assess the strategic fit of our existing businesses and may divest or otherwise dispose of businesses that are deemed not to fit with our strategic plan or are not achieving the desired return on investment, and we cannot be certain that our business, operating results and financial condition will not be materially and adversely affected.

A successful divestiture depends on various factors, including our ability to effectively transfer liabilities, contracts, facilities and employees to any purchaser, identify and separate the intellectual property to be divested from the intellectual property that we wish to retain, reduce fixed costs previously associated with the divested assets or business, and collect the proceeds from any divestitures.  In addition, if customers of the divested business do not receive the same level of service from the new owners, this may adversely affect our other businesses to the extent that these customers also purchase other products offered by us.  All of these efforts require varying levels of management resources, which may divert our attention from other business operations.  If we do not realize the expected benefits or synergies of any divestiture transaction, our consolidated financial position, results of operations and cash flows could be negatively impacted.  In addition, divestitures of businesses involve a number of risks, including significant costs and expenses, the loss of customer relationships, and a decrease in revenues and earnings associated with the divested business.  Furthermore, divestitures potentially involve significant post-closing separation activities, which could involve the expenditure of material financial resources and significant employee resources.  Any divestiture may result in a dilutive impact to our future earnings if we are unable to offset the dilutive impact from the loss of revenue associated with the divestiture, as well as significant write-offs, including those related to goodwill and other intangible assets, which could have a material adverse effect on our results of operations and financial condition.

24

The substantial amount of indebtedness that we incurred to consummate the Fortive Transaction could materially adversely affect our financial conditions.

Our level of indebtedness increased in connection with the Fortive Transaction, as discussed in Note 11, Long Term Debt. Our increased level of indebtedness could have important consequences, including but not limited to:

Our ability to generate sufficient cash flow from operations to make scheduled payments on our debt will depend on a range of economic, competitive and business factors, many of which are outside our control.  There can be no assurance that our business will generate sufficient cash flow from operations to make these payments.  If we are unable to meet our expenses and debt obligations, we may need to refinance all or a portion of our indebtedness before maturity, sell assets or issue additional equity.  We may not be able to refinance any of our indebtedness, sell assets or issue additional equity on commercially reasonable terms or at all, which could cause us to default on our obligations and impair our liquidity. Our inability to generate sufficient cash flow to satisfy our debt obligations, or to refinance our debt obligations on commercially reasonable terms, would have a material adverse effect on our business, financial condition and results of operations, as well as on our ability to satisfy our debt obligations.

We are required to abide by potentially significant restrictions under the Tax Matters Agreement which could limit our ability to undertake certain corporate actions (such as the issuance of Altra common stock or the undertaking of a merger or consolidation) that otherwise could be advantageous.

To preserve the tax-free treatment to Fortive and/or its stockholders of the Distribution and certain related transactions, under the Tax Matters Agreement, we are restricted from taking certain actions that could prevent such transactions from being tax-free. These restrictions may limit our ability to pursue certain strategic transactions or engage in other transactions, including using Altra common stock to make acquisitions and in connection with equity capital market transactions that might increase the value of our business.

None.

The number, type, location and size of the materially important physical properties used by our operations as of December 31, 2020 are shown in the following charts, by segment.

25

We believe our owned and leased facilities are well-maintained and suitable for our operations.

We are, from time to time, subject to a variety of litigation and other legal and regulatory claims incidental to our business. We cannot predict the outcome of these lawsuits, legal proceedings and claims with certainty. Based on our experience, current information and applicable law, we do not believe that these proceedings and claims will have a material adverse effect on our business, financial condition and results of operations.

Not applicable.

26

PART II

Market Information

Our common stock trades on the NASDAQ Global Market under the symbol “AIMC”. As of February 26, 2021, the number of holders on record of our common stock was approximately 104.

Dividends

The Company declared and paid dividends of $0.31 per share of common stock for the year ended December 31, 2020.  The Company declared and paid dividends of $0.68 per share of common stock for the year ended December 31, 2019.

On February 10, 2021, the Company declared a dividend of $0.06 per share for the quarter ended March 31, 2021, payable on April 2, 2021 to stockholders of record as of March 18, 2021. See Note 18 to the consolidated financial statements.

Future declarations of quarterly cash dividends are subject to approval by the Board of Directors and to the Board’s continuing determination that the declaration of dividends are in the best interest of the Company’s stockholders and are in compliance with all laws and agreements of the Company applicable to the declaration and payment of cash dividends.

Securities Authorized for Issuance Under Equity Compensation Plans

The following table presents information concerning our equity compensation plans:

Issuer Repurchases of Equity Securities

On October 19, 2016, our board of directors approved a share repurchase program authorizing the buyback of up to $30.0 million of the Company's common stock. This program expired effective December 31, 2019.

27

Performance Graph

The following graph compares the cumulative total stockholder return on our common stock for the 5-year period from December 31, 2015, through December 31, 2020, with the cumulative total return on shares of companies comprising the S&P Small Cap 600 Index and the S&P Small Cap 600 Capped Industrials Index in each case assuming an initial investment of $100, assuming dividend reinvestment.  

28

Item 6.Reserved

29

Cautionary Statement Regarding Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements, within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, which reflect the Company’s current estimates, expectations and projections about the Company’s future results, performance, prospects and opportunities. Forward-looking statements include, among other things, the information concerning the Company’s possible future results of operations including revenue, costs of goods sold, gross margin, future profitability, future economic improvement, business and growth strategies, financing plans, expected leverage levels, the Company’s competitive position and the effects of competition, the projected growth of the industries in which we operate, and the Company’s ability to consummate strategic acquisitions and other transactions. Forward-looking statements include statements that are not historical facts and can be identified by forward-looking words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “plan,” “may,” “should,” “will,” “would,” “project,” “forecast,” and similar expressions or variations. These forward-looking statements are based upon information currently available to the Company and are subject to a number of risks, uncertainties, and other factors that could cause the Company’s actual results, performance, prospects, or opportunities to differ materially from those expressed in, or implied by, these forward-looking statements. Important factors that could cause the Company’s actual results to differ materially from the results referred to in the forward-looking statements the Company makes in this report include the risks associated with:

30

ALL FORWARD-LOOKING STATEMENTS SPEAK ONLY AS OF THE DATE OF THIS REPORT. EXCEPT AS REQUIRED BY LAW, WE UNDERTAKE NO OBLIGATION TO PUBLICLY UPDATE OR RELEASE ANY REVISIONS TO THESE FORWARD-LOOKING STATEMENTS TO REFLECT ANY EVENTS OR CIRCUMSTANCES AFTER THE DATE OF THIS REPORT OR TO REFLECT THE OCCURRENCE OF UNANTICIPATED EVENTS. ALL SUBSEQUENT WRITTEN AND ORAL FORWARD-LOOKING STATEMENTS ATTRIBUTABLE TO US OR ANY PERSON ACTING ON THE COMPANY’S BEHALF ARE EXPRESSLY QUALIFIED IN THEIR ENTIRETY BY THE CAUTIONARY STATEMENTS CONTAINED OR REFERRED TO IN THIS SECTION AND IN OUR RISK FACTORS SET FORTH IN PART I, ITEM 1A OF THE COMPANY’S ANNUAL REPORT ON FORM 10-K AND IN OTHER REPORTS FILED WITH THE SEC BY THE COMPANY.

The following discussion of the financial condition and results of operations of Altra Industrial Motion Corp. and its subsidiaries should be read together with the consolidated financial statements of Altra Industrial Motion Corp. and its subsidiaries and related notes included elsewhere in the Company’s Annual Report on Form 10-K. The following discussion includes forward-looking statements. For a discussion of important factors that could cause actual results to differ materially from the results referred to in the forward-looking statements, see “Forward-Looking Statements” and “Risk Factors”. Unless the context requires otherwise, the terms “Altra,” “Altra Industrial Motion Corp.,” “the Company,” “we,” “us” and “our” refer to Altra Industrial Motion Corp. and its subsidiaries.

The following generally discusses 2020 and 2019 items and year-to-year comparison between 2020 and 2019. Discussion of historical items and year-to-year comparisons between 2019 and 2018 that are not included in this discussion can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2019, filed with the SEC on February 27, 2020.  

General

We are a leading global designer, producer and marketer of a wide range of electromechanical power transmission motion control (“PTMC”) products. Our technologies are used in various motion related applications and across a wide variety of high-volume manufacturing and non-manufacturing processes in which reliability and precision are critical to avoid costly down time and enhance the overall efficiency of operations.

We market our products under well recognized and established brands, which have been in existence for an average of over 85 years.  We serve a diversified group of customers comprised of over 1,000 direct original equipment manufacturers (“OEMs”) including GE, Honeywell and Siemens, and also benefit from established, long-term relationships with leading industrial distributors, including Applied Industrial Technologies, Grainger, Kaman Industrial Technologies and Motion Industries. Many of our customers operate globally across a large number of industries, ranging from transportation, turf and agriculture, energy and mining to factory automation, medical and robotics. Our relationships with these customers often span multiple decades, which we believe reflects the

31

high level of performance, quality and service we deliver, supplemented by the breadth of our offering, vast geographic footprint and our ability to rapidly develop custom solutions for complex customer requirements.

On October 1, 2018, Altra consummated the Fortive Transaction and acquired the A&S Business for an aggregate purchase price of approximately $2,855.7 million, subject to certain post-closing adjustments, which consisted of $1,400.0 million of cash and debt instruments transferred to Fortive and shares of Altra common stock received by Fortive shareholders valued at approximately $1,455.7 million. As of December 31, 2020, the initial accounting for the Fortive Transaction (including the allocation of the purchase price to acquired assets and liabilities) is complete.

Business Outlook

Our future financial performance depends, in large part, on conditions in the markets that we serve and on conditions in the U.S., European, and global economies in general. In the year ended December 30, 2020, the broad diversity of our end markets and our ability to act nimbly to control costs through the COVID-19 pandemic allowed us to generate strong cash flow, deliver excellent working capital performance, and continue to make significant progress de-levering our balance sheet.

The COVID-19 pandemic continues to affect the global economy and business environment. Throughout 2020, our Pandemic Response Team continued to identify and assess risks and develop countermeasures following guidance from national, state and local governmental and health authorities. In addition, our Business Continuity Task Force continued to work to ensure continuity of supply for our customers. During the pandemic to date, Altra has experienced minimal supply chain disruption and all material manufacturing facilities have continued to be operational.

Looking ahead to 2021, we will continue to adopt a cautious approach due to ongoing uncertainty related to the duration of the COVID-19 pandemic and the timing of any potential broad economic recovery. Our strategic priorities continue to be managing costs, driving margin enhancement, de-levering our balance sheet and positioning Altra to grow and thrive as a premier industrial company for the long term. In the event market conditions improve sooner than anticipated, we will revisit our outlook and priorities appropriately as we gain better visibility.

Critical Accounting Policies

The methods, estimates and judgments we use in applying our critical accounting policies have a significant impact on the results we report in our financial statements. We evaluate our estimates and judgments on an on-going basis. Our estimates are based upon historical experience and assumptions that we believe are reasonable under the circumstances. Our experience and assumptions form the basis for our judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may vary from what our management anticipates and different assumptions or estimates about the future could change our reported results.

We believe the following accounting policies are the most critical in that they are important to the financial statements and they require the most difficult, subjective or complex judgments in the preparation of the financial statements.

Inventory.    Inventories are generally stated at the lower of cost or net realizable value using the first-in, first-out (FIFO) method. The cost of inventory includes direct materials, direct labor, and production overhead. We state inventories acquired through acquisitions at their fair value at the date of acquisition based on the replacement cost of raw materials, the sales price of the finished goods less an appropriate amount representing the expected profitability from selling efforts, and, for work-in-process, the sales price of the finished goods less an appropriate amount representing the expected profitability from selling efforts and costs to complete.

We periodically review our quantities of inventories on hand and compare these amounts to the historical and expected usage of each particular product or product line. We record as a charge to cost of sales any amounts required to reduce the carrying value of inventories to net realizable value.

Business Combinations.    Business combinations are accounted for at fair value. Acquisition costs are generally expensed as incurred and recorded in selling, general and administrative expenses. The accounting for business combinations requires estimates and judgment as to expectations for future cash flows of the acquired business, and the allocation of those cash flows to identifiable intangible assets, in determining the estimated fair value for assets and liabilities acquired. The fair value assigned to tangible and intangible assets acquired and liabilities assumed are based on management’s estimates and assumptions, as well as other information compiled by management, including valuations that utilize customary valuation procedures and techniques. If the actual results differ from the estimates and judgments used in these estimates, the amounts recorded in the financial statements could result in a possible impairment of the intangible assets and goodwill, or require acceleration of the amortization expense of finite-lived intangible assets

Goodwill, Intangibles and other long-lived assets.    In connection with our acquisitions, goodwill and intangible assets were identified and recorded at fair value. We recorded intangible assets for customer relationships, trade names and trademarks, product

32

technology, patents, in-process research and development (“IPR&D”) and goodwill. In valuing the customer relationships, trade names and trademarks and product technology, we utilized variations of the income approach. The income approach was considered the most appropriate valuation technique because the inherent value of these assets is their ability to generate current and future income. The income approach relies on historical financial and qualitative information, as well as assumptions and estimates for projected financial information. Projected financial information is subject to risk if our estimates are incorrect. The most significant estimate relates to our projected revenues and profitability. If we do not meet the projected revenues and profitability used in the valuation calculations then the intangible assets could be impaired. In determining the value of customer relationships, we reviewed historical customer attrition rates which were determined to be approximately 1%- 12% per year. Most of our customers tend to be long-term customers with very little turnover. While we do not typically have long-term contracts with customers, we have established long-term relationships with customers which make it difficult for competitors to displace us. Additionally, we assessed historical revenue growth within our industry and customers’ industries in determining the value of customer relationships. The value of our customer relationships intangible asset could become impaired if future results differ significantly from any of the underlying assumptions. This could include a higher customer attrition rate or a change in industry trends such as the use of long-term contracts which we may not be able to obtain successfully. Customer relationships and product technology and patents are considered finite-lived assets, with estimated lives ranging from 3 to 29 years. The estimated lives were determined by calculating the number of years necessary to obtain 95% of the value of the discounted cash flows of the respective intangible asset.

Goodwill, trade names and trademarks and IPR&D are considered indefinite lived assets. Our trade names and trademarks identify us and differentiate us from competitors, and therefore competition does not limit the useful life of these assets. Additionally, we believe that our trade names and trademarks will continue to generate product sales for an indefinite period.

Accounting standards require that an annual goodwill impairment assessment be conducted at the reporting unit level using either a quantitative or qualitative approach. The Company has determined that its Power Transmission Technologies (“PTT”) reporting segment is comprised of three reporting units. The Company has also determined that its A&S Business reporting segment is comprised of four reporting units.

In connection with the Company’s annual impairment review, goodwill is assessed for impairment by comparing the fair value of the reporting unit to the carrying value. The Company’s measurement date is October 31st. The Company determines the fair value of its reporting units using the discounted cash flow model and, where appropriate, the Company also uses the market approach. The determination of the fair value using the discounted cash flow model requires management to make significant estimates and assumptions related to forecasts of future revenues, profit margins, and discount rates. The determination of the fair value using the market approach requires management to make significant assumptions related to earnings before interest, taxes, depreciation, and amortization (EBITDA) multiples. The Company estimates future cash flows based upon historical results and current market projections, discounted at a market comparable rate. An impairment loss would be recognized to the extent that a reporting unit’s carrying amount exceeded its deemed fair value. Refer to Note 7 for additional discussion of the Company’s annual impairment review.

Management believes the preparation of revenue and profitability growth rates for use in the long-range plan and the discount rate requires significant use of judgment. If any of our reporting units do not meet our forecasted revenue and/or profitability estimates, we could be required to perform an interim goodwill impairment analysis in future periods. In addition, if our discount rate increases, we could be required to perform an interim goodwill impairment analysis.

For our indefinite lived intangible assets, mainly trademarks, we estimate the fair value by first estimating the total revenue attributable to the trademarks. Second, we estimate an appropriate royalty rate using the return on assets method by estimating the required financial return on our assets, excluding trademarks, less the overall return generated by our total asset base. The return as a percentage of revenue provides an indication of our royalty rate. We compared the estimated fair value of the trademarks with the carrying value of the trademarks and did not identify any impairment as of the annual impairment date or for any of the periods presented.

Long-lived assets, including definite-lived intangible assets are reviewed for impairment when events or circumstances indicate that the carrying amount of a long lived asset may not be recovered. Long-lived assets are considered to be impaired if the carrying amount of the asset exceeds the undiscounted future cash flows expected to be generated by the asset over its remaining useful life. If an asset is considered to be impaired, the impairment is measured by the amount by which the carrying amount of the asset exceeds its fair value, and is charged to results of operations at that time.

33

Recent Accounting Standards

See the discussion of significant accounting policies in Note 1 of the consolidated financial statements for the year ended December 31, 2020.  

Results of Operations.

Amounts in millions, except percentage data

Segment Performance.

Amounts in millions, except percentage data

Year Ended December 31, 2020 Compared with Year Ended December 31, 2019

Net Sales.    The decrease in net sales during the year ended December 31, 2020 is primarily due to the overall economic decline due to the effects of the COVID-19 pandemic, and a decline in sales in our oil and gas end market as a result of the reduction in oil prices globally. Changes in foreign currency exchange rates had a favorable impact on net sales of approximately $1.0 million,

34

primarily driven by the Euro. Strength in China, primarily in the heavy-duty truck and wind end markets, and the impact of price collectively had a favorable impact of approximately $15.0 million for the year ended December 31, 2020.

Gross profit.    Gross profit as a percentage of net sales increased during the year ended December 31, 2020 primarily due to extensive cost reduction actions taken to offset the economic impact of the COVID-19 pandemic, including cost reductions associated with temporary shutdowns of our manufacturing facilities and shutdowns of operations of our customers and suppliers. Additionally, price increases of $15.0 million and changes in foreign currency exchange rates of $0.1 million, primarily driven by the Euro, contributed to the increase in gross profit as a percentage of net sales.

Selling, general and administrative expenses.    For the year ended December 31, 2020, SG&A as a percentage of net sales decreased primarily due to cost reduction actions in response to the COVID-19 pandemic which began during the quarter ended March 31, 2020 and continued throughout the year. Our cost reduction efforts were focused on compensation reductions, and the elimination of non-critical expenses, including travel, which decreased our overall SG&A costs. Although we do expect our SG&A costs to increase as business activity normalizes and certain temporary cost reductions terminate, due to ongoing uncertainty as a result of the ongoing COVID-19 pandemic we are not able to anticipate when these costs will increase in future periods.

Research and development expenses.     Research and development expenses decreased due to cost reduction actions which began during the quarter ended March 31, 2020 in response to the COVID-19 pandemic and continued throughout the year. We expect research and development costs to approximate 2.5% - 3.5% of sales in future periods.

Restructuring costs.   During the quarter ended September 30, 2017, we commenced a restructuring plan (“2017 Altra Plan”) as a result of Altra’s purchase of Stromag (the “Stromag Acquisition”) and to rationalize our global renewable energy business.  The actions taken pursuant to the 2017 Altra Plan included reducing headcount, facility consolidations and the elimination of certain costs. We incurred approximately $0.5 million in expense through 2020 related to the 2017 Altra Plan. The total 2017 Altra Plan savings are in line with our expectations. We do not expect to incur any additional material costs as a result of the 2017 Altra Plan.

During 2019, we commenced a restructuring plan (“2019 Plan”) to drive efficiencies, reduce the number of facilities and optimize our operating margin. We expect to incur expenses related to workforce reductions, lease termination costs and other facility rationalization costs. We expect to incur an additional $5 - $7 million in restructuring expenses under the 2019 Altra Plan over the next 3 years, primarily related to plant consolidation and headcount reductions. The cost savings for the year ended December 31, 2020 were recognized as improvements in SG&A and cost of sales of approximately $2.2 million and $0.8 million, respectively.

35

Interest expense.    Interest expense decreased for the year ended December 31, 2020 primarily due to debt paydowns of approximately $160 million on our Term Loan Facility during the year ended December 31, 2020, which resulted in lower average outstanding borrowings and lower average interest rates. This includes non-cash interest expense of $9.0 million as a result of the termination of the interest rate swap. We expect our interest expense in 2021 to continue to decrease as a result of additional principal payments on our debt and expected continuation of lower current interest rates compared to 2020.

Provision for income taxes.     The provision for income tax as a percentage of income before income taxes during the year ended December 31, 2020 was higher than that of 2019 due to the goodwill impairment charge recorded at the JVS reporting unit during the quarter ended March 31, 2020. The tax rate was also impacted by the 2020 benefit from the Global Intangible Low-Taxed Income (“GILTI”) tax as a result of the 2017 Tax Act in the United States. The Company expects its consolidated tax rate to be approximately 20% to 23% in future periods.

Segment Performance

Power Transmission Technologies

Net sales in the Power Transmission Technologies segment were $818.6 million in the year ended December 31, 2020, a decrease of approximately $89.1 million or 9.8%, from the year ended December 31, 2019.  The decrease was primarily due to the overall economic decline as a result of the COVID-19 pandemic and its impact on our metals, mining, and oil and gas end markets. The decline in net sales was partially offset by strength in our renewable energy end market in China. In addition, changes in foreign currency exchange rates for the year ended December 31, 2020 had a favorable impact on net sales of $2.1 million, primarily driven by the Euro. Price had a favorable impact on net sales for the year ended December 31, 2020 of $9.4 million. Segment operating income decreased by approximately $16.0 million compared to the prior year, which was primarily driven by the decline in sales.

Automation & Specialty

Net sales in the Automation & Specialty business segment were $911.8 million in the year ended December 31, 2020, a decrease of $19.2 million from the year ended December 31, 2019.  The decrease was primarily due to the economic decline as a result of the COVID-19 pandemic, partially offset by growth in the class eight heavy duty truck, factory automation, aerospace and defense, and COVID-19 related medical end markets. In addition, changes in foreign currency exchange rates had an unfavorable impact on net sales of $1.0 million for the year ended December 31, 2020, primarily driven by the Indian Rupee and Brazilian Real. Price had a favorable impact on net sales for the year ended December 31, 2020, of $5.6 million. The Automation & Specialty segment had a loss from operations for the year ended December 31, 2020, due to the non-cash impairment charge recorded at the JVS reporting unit during the quarter ended March 31, 2020. As a result of both the COVID-19 related economic downturn and its impact on the anticipated financial results of the JVS reporting unit, the Company concluded that it was more likely than not that the carrying value of the JVS reporting unit exceeded its fair value and performed an interim impairment review for both goodwill and tradename intangible assets of the JVS reporting unit during the quarter ended March 30, 2020. As a result, the Company recorded non-cash impairment charges of $8.4 million and $139.1 million for indefinite-lived intangible assets and goodwill, respectively, in the quarter ended March 31, 2020.

Liquidity and Capital Resources

Overview

We finance our capital and working capital requirements through a combination of cash flows from operating activities and borrowings under the Altra Revolving Credit Facility. At December 31, 2020, we have the ability under the Altra Revolving Credit Facility to borrow an additional $295.5 million subject to satisfying customary conditions.  We expect that our primary ongoing requirements for cash will be for working capital, debt service, capital expenditures, acquisitions, pensions, dividends and share repurchases.  

On October 1, 2018, we consummated the Fortive Transaction.  The aggregate purchase price for the A&S Business was approximately $2,855.7 million, subject to certain post-closing adjustments, and consisted of (i) $1,400.0 million of cash transferred to Fortive and (ii) shares of Altra common stock received by Fortive shareholders valued at approximately $1,455.7 million.  The value

36

of the common stock was based on the closing stock price on the A&S Closing Date of $41.59.  We financed the cash portion of the Fortive Transaction with the Altra Credit Facilities (as defined herein).

We believe, based on current and projected levels of cash flows from operating activities, together with our ability to borrow under the Altra Revolving Credit Facility (as defined herein), we have sufficient liquidity to meet our short-term and long-term needs to make required payments of interest on our debt, make amortization payments under the Altra Credit Facilities (as defined herein), fund our operating needs, fund working capital and capital expenditure requirements and comply with the financial ratios in our debt agreements. In the event additional funds are needed for operations, we could attempt to obtain new debt and/or refinance existing debt, or attempt to raise capital in the equity markets.  There can be no assurance however that additional debt or equity financing will be available on commercially acceptable terms, if at all.

Notes

On September 26, 2018, Stevens Holding Company, Inc., a wholly owned subsidiary of the Company (“Stevens Holding”), announced the pricing of $400 million aggregate principal amount of Stevens Holding’s 6.125% senior notes due 2026 (the “Notes”) in a private debt offering pursuant to Rule 144A and Regulation S under the Securities Act of 1933 (the “Private Placement”). On October 1, 2018, the Private Placement closed, and Stevens Holding sold $150 million aggregate principal amount of the Notes (the “Primary Notes”) and an unaffiliated selling securityholder sold $250 million aggregate principal amount of the Notes (the “Selling Securityholder Notes”). The Notes will mature on October 1, 2026. Interest on the Notes accrues from October 1, 2018, and the first interest payment date on the Notes was April 1, 2019. The Notes may be redeemed at the option of Stevens Holding on or after October 1, 2023, in the manner and at the redemption prices specified in the indenture governing the Notes, plus accrued and unpaid interest thereon, if any, to, but excluding, the date of redemption. The Notes are guaranteed on a senior unsecured basis by Altra and certain of its domestic subsidiaries.  

The unaffiliated selling securityholder received the Selling Securityholder Notes from Fortive prior to the closing of the Private Placement in exchange for certain outstanding Fortive debt held or acquired by the unaffiliated selling securityholder.  Stevens Holding used the net proceeds of the Primary Notes to fund a dividend payment to Fortive prior to the consummation of the Merger, and Stevens Holding did not receive any proceeds from the sale of the Selling Securityholder Notes.

Altra Credit Agreement

On the A&S Closing Date, Altra entered into a new Credit Agreement (the “Altra Credit Agreement”) with certain subsidiaries of Altra, JPMorgan Chase Bank, N.A., as administrative agent and collateral agent, and a syndicate of lenders.  The Altra Credit Agreement provides for a seven-year senior secured term loan to Altra in an aggregate principal amount of $1,340.0 million (the “Altra Term Loan Facility”) and a five-year senior secured revolving credit facility provided to Altra and certain of its subsidiaries in an aggregate committed principal amount of $300.0 million (the “Altra Revolving Credit Facility” and together with the Altra Term Loan Facility, the “Altra Credit Facilities”). The proceeds of the Altra Term Loan Facility were used to (i) consummate the Direct Sales, (ii) repay in full and extinguish all outstanding indebtedness for borrowed money under the 2015 Credit Agreement and (iii) pay certain fees, costs, and expenses in connection with the consummation of the Fortive Transaction. Any proceeds of the Altra Term Loan Facility not so used may be used for general corporate purposes.  The proceeds of the Altra Revolving Credit Facility will be used for working capital and general corporate purposes.

The Altra Credit Facilities are guaranteed on a senior secured basis by Altra and by each direct or indirect wholly owned domestic subsidiary of Altra, subject to certain customary exceptions.

Borrowings under the Altra Term Loan Facility will bear interest at a per annum rate equal to a “Eurocurrency Rate” plus 2.00%, in the case of Eurocurrency Rate borrowings, or equal to a “Base Rate” plus 1.00%, in the case of Base Rate borrowings.  Borrowings under the Altra Revolving Credit Facility will initially bear interest at a per annum rate equal to a Eurocurrency Rate plus 2.00%, in the case of Eurocurrency Rate borrowings, or equal to a Base Rate plus 1.00%, in the case of Base Rate borrowings, and thereafter will bear interest at a per annum rate equal to a Eurocurrency Rate or Base Rate, as applicable, plus an interest rate spread determined by reference to a pricing grid based on Altra’s senior secured net leverage ratio.  In addition, Altra will be required to pay fees that will fluctuate between 0.250% per annum to 0.375% per annum on the unused amount of the Altra Revolving Credit Facility, based upon Altra’s senior secured net leverage ratio. The interest rate on the Term Loan Facility and the Revolving Credit Facility was 2.146% at December 31, 2020.  

Revolving borrowings and issuances of letters of credit under the Altra Revolving Credit Facility are subject to the satisfaction of customary conditions, including the accuracy of representations and warranties and the absence of defaults.

37

The Altra Credit Agreement contains usual and customary representations and warranties, and usual and customary affirmative and negative covenants, including limitations on liens, investments, restricted payments, additional indebtedness and asset sales and mergers.  In addition, the Altra Credit Agreement requires that Altra maintain a specified maximum senior secured leverage ratio and a specified minimum interest coverage ratio.  The obligations of the borrowers of the Altra Credit Facilities under the Altra Credit Agreement may be accelerated upon customary events of default, including non-payment of principal, interest, fees and other amounts, inaccuracy of representation and warranties, violation of covenants, cross default and cross acceleration, voluntary and involuntary bankruptcy or insolvency proceedings, inability to pay debts as they become due, material judgments, ERISA events, actual or asserted invalidity of security documents or guarantees and change in control.  

2015 Credit Agreement

On October 22, 2015, the Company entered into a Second Amended and Restated Credit Agreement by and among the Company, Altra Industrial Motion Netherlands, B.V., one of the Company’s foreign subsidiaries (collectively with the Company, the “Borrowers”), the lenders party to the Second Amended and Restated Credit Agreement from time to time (collectively, the “Lenders”), J.P, Morgan Securities LLC, Wells Fargo Securities, LLC, and KeyBanc Capital Markets, Inc., as joint lead arrangers and joint bookrunners, and JPMorgan Chase Bank, N.A., as administrative agent (the “Administrative Agent”), to be guaranteed and secured by certain domestic subsidiaries of the Company, and which may be amended from time to time (the “2015 Credit Agreement”).

Under the 2015 Credit Agreement, the amount of the Company’s revolving credit facility was $350 million (the “2015 Revolving Credit Facility”).  Prior to October 2018, the amounts available under the 2015 Revolving Credit Facility were used for general corporate purposes, including acquisitions, and to repay existing indebtedness.

Prior to October 2018, the amounts available under the 2015 Revolving Credit Facility could be drawn upon in accordance with the terms of the 2015 Credit Agreement. All amounts outstanding under the 2015 Revolving Credit Facility were due on the stated maturity or such earlier time, if any, required under the 2015 Credit Agreement. The amounts owed under the 2015 Revolving Credit Facility could be prepaid at any time, subject to usual notification and breakage payment provisions. Interest on the amounts outstanding under the 2015 Revolving Credit Facility was calculated using either an ABR Rate or Eurodollar Rate, plus the applicable margin. A portion of the 2015 Revolving Credit Facility could also be used for the issuance of letters of credit, and a portion of the amount of the 2015 Revolving Credit Facility was available for borrowings in certain agreed upon foreign currencies.

The 2015 Credit Agreement contained various affirmative and negative covenants and restrictions, which among other things, required the Borrowers to provide certain financial reports to the Lenders, required the Company to maintain certain financial covenants relating to consolidated leverage and interest coverage, limited maximum annual capital expenditures, and limited the ability of the Company and its subsidiaries to incur or guarantee additional indebtedness, pay dividends or make other equity distributions, purchase or redeem capital stock or debt, make certain investments, sell assets, engage in certain transactions, and effect a consolidation or merger. The 2015 Credit Agreement also contained customary events of default.  

On October 21, 2016, the Company entered into an agreement to amend the 2015 Credit Agreement (the “October 2016 Amendment”).  The October 2016 Amendment, which became effective upon the December 30, 2016 closing of the Stromag Acquisition increased the 2015 Revolving Credit Facility by $75 million to $425 million.  The Company borrowed additional funds under the increased 2015 Revolving Credit Facility to finance the Stromag Acquisition.  The October 2016 Amendment also reset the possible expansion of up to $150 million of additional future loan commitments.  In addition, the October 2016 Amendment increased the multicurrency sublimit to $250 million and adjusted certain financial covenants.

On October 1, 2018, in connection with the Fortive Transaction and the entering into the Altra Credit Agreement, the 2015 Credit Agreement was terminated and all outstanding indebtedness for borrowed money thereunder was repaid in full.

Working Capital Line of Credit

Two foreign subsidiaries of the Company have lines of credit used for operating purposes. As of December 31, 2020, the Company had 13.5 million Turkish Lira, or $1.8 million, and 3.2 million Chinese RMB, or $0.5 million, outstanding on each line of credit respectively.  

38

Borrowings

Below is a summary of borrowings as of December 31, 2020 and 2019, respectively:

Below is a reconciliation of net debt for the year ended December 31, 2020:

Cash and Cash Equivalents

The following is a summary of our cash balances and cash flows (in millions) as of and for the years ended December 31, 2020 and 2019, respectively.

Cash Flows for 2020

Funds provided by operating activities totaled approximately $262.5 million for the year ended December 31, 2020, an increase of $6.6 million as compared to December 31, 2019.  This is primarily due to a net loss of $25.5 million for the year ended December 31, 2020 as compared to net income of $127.2 million for the year ended December 31, 2019.  In addition, in 2020, the Company recorded a $34.7 million payment for the termination of an interest rates swap.  These decreases were offset by a $147.5 million non-cash goodwill and intangible asset impairment charge, a $32.1 million improvement in working capital accounts and a $9.0 million non-cash amortization of interest rate swap expense.

Net cash provided by investing activities for the year ended December 31, 2020 increased by approximately $96.5 million primarily due to the receipt of settlement proceeds of approximately $56.2 million related to the termination of cross-currency interest rate swaps during the first quarter of 2020. We also had lower purchases of machinery and equipment and a lower purchase price adjustment related to the 2018 Fortive transaction when compared to the prior year. This cash provided by investing activities was partially offset by our $5.0 million investment in MTEK Industry AB (“MTEK”), a small manufacturing software company.

Net cash used in financing activities in the year ended December 31, 2020 as compared to the year ended December 31, 2019 increased by $15.3 million primarily due to debt paydowns of approximately $160.0 million on our Term Loan Facility compared to $130 million in 2019. This increase was partially offset by a reduction in dividend payments of $16.6 million compared to the prior year.

39

We intend to use our remaining cash and cash equivalents and cash flow from operations to provide for our working capital needs, to fund potential future acquisitions, to service our debt, including principal payments, for capital expenditures, for pension funding, and to pay dividends to our stockholders. As of December 31, 2020, we have approximately $157.6 million of cash and cash equivalents held by foreign subsidiaries. We believe our future operating cash flows will be sufficient to meet our future operating and investing cash needs. Furthermore, the existing cash balances and the availability of additional borrowings under our Altra Credit Facilities provide additional potential sources of liquidity should they be required.

Capital Expenditures

We made capital expenditures of approximately $33.7 million and $51.7 million in the years ended December 31, 2020 and 2019, respectively.  The decrease in capital expenditures during 2020 was due to efforts to preserve liquidity as a result of uncertainty related to the economic impact of the COVID-19 pandemic. These capital expenditures will support on-going business needs. In 2021, we expect capital expenditures to be in the range of $45.0 million to $50.0 million.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements that provide liquidity, capital resources, market or credit risk support that expose us to any liability that is not reflected in our consolidated financial statements.

Contractual Obligations

The following table is a summary of our contractual cash obligations as of December 31, 2020 (in millions):

40

From time to time, we may have cash funding requirements associated with our pension plans. As of December 31, 2020, there were no funding requirements for 2021 to 2025. These amounts are based on actuarial assumptions and actual amounts could be materially different.

We may be required to make cash outlays related to our unrecognized tax benefits. However, due to the uncertainty of the timing of future cash flows associated with our unrecognized tax benefits, we are unable to make reasonably reliable estimates of the period of cash settlement, if any, with the respective taxing authorities.

Stock-based Compensation

The 2014 Omnibus Incentive Plan (the “2014 Plan”) was approved by the Company's stockholders at its 2014 annual meeting.  The 2014 Plan provides for various forms of stock-based compensation to our directors, executive personnel and other key employees and consultants. Under the 2014 Plan, the total number of shares of common stock available for delivery pursuant to the grant of awards (“Awards”) was originally 750,000. Shares of our common stock subject to Awards or grants awarded under our prior 2004 Equity Incentive Plan and outstanding as of the effective date of the 2014 Plan (except for substitute awards) that terminate without being exercised, expire, are forfeited or canceled, are exchanged for Awards that did not involve shares of common stock, are not issued on the stock settlement of a stock appreciation right, are withheld by the Company or tendered by a participant (either actually or by attestation) to pay an option exercise price or to pay the withholding tax on any Award, or are settled in cash in lieu of shares will again be available for Awards under the 2014 Plan. An amendment to the 2014 Plan to, among other things, make an additional 2,200,000 shares of common stock available for grant under the 2014 Plan was approved by the Company’s stockholders at the special meeting of stockholders on September 4, 2018. An additional amendment to the 2014 Plan to, among other things, make an additional 3,000,000 shares of common stock available for grant under the 2014 Plan was approved by the Company’s stockholders at its 2020 annual meeting of stockholders on April 28, 2020.

As of December 31, 2020, there were 783.8 thousand shares of unvested restricted stock outstanding under the 2014 Plan. The remaining compensation cost to be recognized through 2022 is $19.3 million. Based on the stock price at December 31, 2020, of $55.4 per share, the intrinsic value of these awards as of December 31, 2020, was $43.5 million.

Income Taxes

We are subject to taxation in multiple jurisdictions throughout the world. Our effective tax rate and tax liability will be affected by a number of factors, such as the amount of taxable income in particular jurisdictions, the tax rates in such jurisdictions, tax treaties between jurisdictions, the extent to which we transfer funds between jurisdictions and repatriate income, and changes in law. Generally, the tax liability for each legal entity is determined either (a) on a non-consolidated and non-combined basis or (b) on a consolidated and combined basis only with other eligible entities subject to tax in the same jurisdiction, in either case without regard to the taxable losses of non-consolidated and non-combined affiliated entities. As a result, we may pay income taxes to some jurisdictions even though on an overall basis we incur a net loss for the period.

Seasonality

General economic conditions impact our business and financial results, and certain of our businesses experience seasonal and other trends related to the industries and end markets that they serve. For example, sales to OEMs are often stronger immediately preceding and following the launch of new products. In addition, we experience seasonality in our turf and garden business. As our large OEM customers prepare for the spring season, our shipments generally start increasing in December, peak in February and March, and begin to decline in April and May. This allows our customers to have inventory in place for the peak consumer purchasing periods for turf and garden products. The June-through-November period is typically the low season for us and our customers in the turf and garden market. Seasonality is also affected by weather and the level of housing starts. However, as a whole, we are not subject to material seasonality.

41

Inflation

Inflation can affect the costs of goods and services we use. The majority of the countries that are of significance to us, from either a manufacturing or sales viewpoint, have in recent years enjoyed relatively low inflation although there can be no assurance that inflation will not increase in future periods. The competitive environment in which we operate inevitably creates pressure on us to provide our customers with cost-effective products and services.

We are exposed to various market risk factors such as fluctuating interest rates, changes in foreign currency rates and changes in commodity prices. At present, we do not utilize any other derivative instruments to manage these risks.

Currency translation.    We are exposed to market risk from changes in foreign currency exchange rates primarily in connection with our foreign subsidiaries. The results of operations of our foreign subsidiaries are translated into U.S. Dollars at the average exchange rates for each period concerned. The balance sheets of foreign subsidiaries are translated into U.S. Dollars at the exchange rates in effect at the end of each period. Any adjustments resulting from the translation are recorded as other comprehensive income. For the year ended December 31, 2020, approximately 47% of our revenues and approximately 54% of our total operating income were denominated in foreign currencies.

We have performed a sensitivity analysis assuming a hypothetical 10% adverse movement in foreign currency exchange rates from the quoted foreign currency exchange rates at December 31, 2020. As of December 31, 2020, the analysis indicated that such an adverse movement would cause our revenues and operating income to fluctuate by approximately 4.5% and 5.2%, respectively.

Currency transaction exposure.    Currency transaction exposure arises where actual sales, purchases and financing transactions are made by a business or company in a currency other than its own functional currency. Any transactional differences at an international location are recorded in net income on a monthly basis. The Company enters into contractual derivative arrangements to manage changes in market conditions, related foreign currency exposure and occasionally on commodity prices.

Interest rate risk.    We are subject to market exposure to changes in interest rates on some of our financing activities. This exposure relates to borrowings under our Altra Credit Facilities that are subject to variable interest rates. Interest on the amounts outstanding under the credit facilities is calculated using the Eurodollar rate, plus the applicable margin. As of December 31, 2020, we had $1,030.0 million in borrowings under our Altra Credit Facilities. A hypothetical change in interest rates of 1% on our outstanding variable rate debt would increase our annual interest expense by approximately $10.3 million.

Commodity price exposure.   We have exposure to changes in commodity prices principally related to metals including steel, copper and aluminum. We primarily manage our risk associated with such increases through the use of surcharges or general pricing increases for the related products. We do not engage in the use of financial instruments to hedge our commodities price exposure.

42

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and the Board of Directors of Altra Industrial Motion Corp.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Altra Industrial Motion Corp. and subsidiaries (the "Company") as of December 31, 2020 and 2019, the related consolidated statements of operations, comprehensive income, stockholders' equity, and cash flows, for each of the three years in the period ended December 31, 2020, and the related notes and the financial statement schedule listed in the Index at Item 15 (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020 and 2019, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2020, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 26, 2021, expressed an unqualified opinion on the Company's internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Goodwill —Thomson and JVS Reporting Units — Refer to Notes 1 and 7 to the financial statements

Critical Audit Matter Description

The Company’s evaluation of goodwill for impairment involves the comparison of the fair value of each reporting unit to its carrying value. The Company determines the fair value of its reporting units using the discounted cash flow model and for the Thomson and JVS reporting units, the Company also used the market approach. The determination of the fair value using the discounted cash flow model requires management to make significant estimates and assumptions related to forecasts of future revenues, profit margins, and discount rates. The determination of the fair value using the market approach requires management to make significant assumptions related to earnings before interest, taxes, depreciation, and amortization (EBITDA) and revenue multiples. The goodwill balance was $1.6 billion as of December 31, 2020, of which $442.2 million and $53.9 million were allocated to the Thomson and JVS reporting units, respectively. The fair value of the Thomson reporting unit exceeded the carrying value by less than 10% as of the annual goodwill impairment date and, therefore, no impairment was recognized. All other reporting units had fair values that exceed their carrying value by 10% or more, including the JVS reporting unit, as of the annual goodwill impairment date. The Company performed an interim impairment review for JVS’s goodwill during the quarter ended March 31, 2020 and determined that the carrying value of the reporting unit exceeded the fair value at that date, resulting in an impairment charge of $139.1 million.

43

Given the significant estimates and assumptions management makes to estimate the fair value of the Thomson and JVS reporting units and the sensitivity of Thomson and JVS’s operations to changes in certain markets, performing audit procedures to evaluate the reasonableness of management’s estimates and assumptions related to forecasts of future revenues, profit margins, EBITDA and revenue multiples, and the selection of the discount rate for Thomson and JVS required a high degree of auditor judgment and an increased extent of effort, including the need to involve our fair value specialists.

How the Critical Audit Matter Was Addressed in the Audit

Our audit procedures related to the forecasts of future revenues, profit margins, and EBITDA and revenue multiples (“forecasts”), and the selection of the discount rate for the Thomson and JVS reporting units included the following, among others:

/s/ Deloitte & Touche LLP

Boston, Massachusetts  

February 26, 2021  

We have served as the Company's auditor since 2009.

44

ALTRA INDUSTRIAL MOTION CORP.

Consolidated Balance Sheets

Amounts in millions, except share and per share amounts