iBio (IBIO) 10-K2021 FY Annual report

IBIO, INC.

ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

​

​

​

​

​

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

Unless the context requires otherwise, references in this Annual Report on Form 10-K (this “Annual Report”) to “iBio,” the “Company,” “we,” “us,” “our” and similar terms mean iBio, Inc.

Certain statements in this Annual Report, including, without limitation, statements under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” includes forward-looking statements as defined in Section 27A of the Securities Act of 1933 (the “Securities Act”), Section 21E of the Securities Exchange Act of 1934 (the “Exchange Act”), the Private Securities Litigation Reform Act of 1995 (the “PSLRA”) or in releases made by the Securities and Exchange Commission (the “SEC”), all as may be amended from time to time. These cautionary statements are being made pursuant to the Securities Act, the Exchange Act and the PSLRA with the intention of obtaining the benefits of the “safe harbor” provisions of such laws. All statements contained in this Annual Report, other than statements that are purely historical, are forward-looking statements. Forward looking-statements can be identified by, among other things, the use of forward-looking language, such as the words “plans,” “intends,” “believes,” “expects,” “anticipates,” “estimates,” “projects,” “potential,” “may,” “will,” “would,” “could,” “should,” “seeks,” or “scheduled to,” or other similar words, the negative of these terms, other variations of these terms or comparable language, or by discussion of strategy or intentions. Forward-looking statements are based upon management’s present expectations, objectives, anticipations, plans, hopes, beliefs, intentions or strategies regarding the future and are subject to known and unknown risks and uncertainties that could cause actual results, events or developments to be materially different from those indicated in such forward-looking statements, including the risks and uncertainties set forth in Item 1A of this Annual Report on Form 10-K and in other securities filings by the Company. These risks and uncertainties should be considered carefully, and readers are cautioned not to place undue reliance on such forward-looking statements. As such, no assurance can be given that the future results covered by the forward-looking statements will be achieved. All information in this Annual Report on Form 10-K is as of June 30, 2021, unless otherwise indicated. The Company does not intend to update this information to reflect events after the date of this Annual Report.

Copies of this Annual Report, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K and our other reports filed with the SEC can be obtained free of charge as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC on our website at http://www.ibioinc.com/ or directly from the SEC’s website at http://www.sec.gov/. Our website and the information contained therein or connected thereto are not intended to be incorporated into this Annual Report.

​

​

​

PART I

Item 1. Business.

Overview

iBio, Inc. (“we”, “us”, “our”, “iBio”, “Ibio, Inc” or the “Company”) is a developer of next-generation biopharmaceuticals and pioneer of the sustainable FastPharming Manufacturing System ^®. The Company is applying its licensed and owned technologies to develop novel product candidates to treat or prevent fibrotic diseases, cancers, and infectious diseases. The Company is using its FastPharming Manufacturing System (“FastPharming” or the “FastPharming System”) and Glycaneering Services ^TM to rapidly and cost effectively build a portfolio of proprietary biologic drug candidates. The Company is also using the FastPharming System to create proteins for others by contract or via the Company’s catalog.

The Company operates in two segments: (i) Biopharmaceuticals: which includes development and licensing in two business units: Therapeutics (focused on oncology as well as fibrotic and infectious diseases) and Vaccines (human and animal health vaccines), and (ii) Bioprocessing which includes Services (FastPharming, Process Development, Manufacturing, as well as Bioanalytical and other services) and Products (growth factors, lectins, and monoclonal antibodies) for research and further manufacturing uses, collectively known as Research & Bioprocess products (“RBP”):

Biopharmaceutical Segment:

Therapeutics

Anti-Fibrotics

Fibrosis is a pathological disorder in which connective tissue replaces normal parenchymal tissue to the extent that it goes unchecked, leading to considerable tissue remodeling and the formation of permanent scar tissue. Fibrosis can occur in many tissues within the body, including the lungs (e.g., idiopathic pulmonary fibrosis [“IPF”] and skin (e.g. systemic scleroderma [“SSc’].

SSc is a rare chronic disease of uncertain etiology characterized by rapid growth of fibrous tissue that leads to scarring and vascular abnormalities in the skin, joints, and internal organs.

IPF is a type of chronic scarring lung disease characterized by a progressive and irreversible decline in lung function. As the disease progresses, the increased scarring leads to decreasing transfer of oxygen into the bloodstream, and ultimately, irreversible loss of lung function. The average life expectancy after an IPF diagnosis is 3-5 years.¹  Because there is no cure and no therapy has been shown to halt or reverse the progressive deterioration of lung function, the primary goal of IPF treatment is to slow disease progression, maintain or improve quality of life, and prolong survival. Estimates have ranged from 2-29 people per 100,000 in the general population have IPF.

For both SSc and IPF, while there are medications that can slow the progression of specific existing symptoms or temporarily reduce the development of new symptoms. However, these existing antifibrotics do not stop or reverse progression, and for many patients, are poorly tolerated. Thus, there remains a need for better treatment options.

​
IBIO-100

The Company’s lead anti-fibrotic candidate is IBIO-100, and its design is based in part upon work by Dr. Carol Feghali-Bostwick, Professor of Medicine at the Medical University of South Carolina and Vice-Chair of the Scleroderma Foundation. Her initial work was conducted at the University of

¹ Scelfo C, Caminati A, Harari S. Recent advances in managing idiopathic pulmonary fibrosis. F1000Res. 2017;6:2052. Published 2017 Nov 27. doi:10.12688/f1000research.10720

1

Pittsburgh, and we have licensed the patents relevant for the continued development of the molecule from the university.  

​

IBIO-100 candidates have been shown to be effective in animal models with both infusion and oral administration schemes, a novel aspect of a biotherapeutic protein of its type.² Also, in preclinical studies, IBIO-100 has been shown to reduce: (i) bleomycin-induced lung fibrosis in mice, as measured by hydroxyproline content and modified Ashcroft histopathology scoring; (ii) collagen content in mice in which fibrosis was produced by osmotic pump delivery of bleomycin followed by pump delivery of IBIO-100, and (iii) hydroxyproline content of human lung tissue obtained after transplant of diseased, terminal-stage organs. Tissue fragments exhibited a significant reduction of hydroxyproline when cultured in the presence of IBIO-100 after only 72 hours. We plan to finalize the selection of a lead molecule and initiate IND-enabling studies during FY 2022.

​
IBIO-100 has been granted orphan drug designation by the FDA for treatment of systemic scleroderma.

​
Oncology

There have been notable advances in the field of oncology in recent years, and arguably none more important than the advent of immunotherapies. The ability of iBio’s FastPharming System to produce monoclonal antibodies – and the Glycaneering Technology that can be used to make them more potent - positions iBio well to compete in the rapidly growing field of immuno-oncology. To that end, the Company announced plans in May 2021 to establish its own, organic drug discovery and development capabilities in the San Diego, California area, while also exploring opportunities to license new assets to add to iBio’s pipeline of therapeutics.

IBIO-101

In August 2021, the Company signed a worldwide exclusive licensing agreement with RubrYc Therapeutics, Inc., (“RubrYc”) to develop and commercialize RTX-003, an anti-CD25 monoclonal antibody [mAb]. In preclinical models of disease, RTX-003 has demonstrated the ability to bind and deplete immunosuppressive regulatory T [Treg] cells to inhibit the growth of solid tumors.

​

Targeting depletion of Treg cells to control tumors emerged as an area of interest in oncology over the past several years. Since Treg cells express interleukin-2 Rα (“IL-2Rα” or “CD25”), it was envisioned that mAbs could be developed that bind CD25 and thereby trigger depletion by Natural Killer cells, resulting in stimulation of anti-tumor immunity.

​

Unfortunately, while first-generation mAbs successfully bound CD25⁺ cells, they also interfered with interleukin-2 [IL-2] signaling to T effector [Teff] cells to activate their cancer cell killing effects. The result was a failure of first-gen anti-CD25 mAbs as cancer immunotherapies, since their favorable anti-Treg effects were negated by their unfavorable impact on Teff cells.

​

RTX-003 is a second-generation anti-CD25 mAb that potently binds and depletes Treg cells but doesn’t block the IL-2 signaling pathway to Teffs. Preclinical data show that an afucosylated version of the molecule is even more potent, but since RTX-003 was initially developed using traditional mammalian cell expression systems, a license from third parties for the afucosylation technology on that platform would be necessary. However, given studies in which we demonstrated that fucosylated and afucosylated RTX-003 produced using our FastPharming System - and enhanced with our Glycaneering Technology – had comparable performance to the mammalian system, we intend to switch to our more sustainable, plant-based manufacturing platform and advance the molecule as IBIO-101. Initiation of IND enabling studies is expected in calendar 2022.

​

​

² Science translational medicine vol. 4,136 (2012): 136a72. doi:10.1126/scitranslmed.3003421

2

​

RTX-003 stimulates anti-tumor immunity by depleting immunosuppressive Treg cells via engagement with Natural Killer [NK] Cells

​

​
Discovery Oncology

iBio has three oncology products in  the discovery stage. All three products are antibodies that should benefit from iBio’s Glycoengineering Technology which enables afucosylation of the molecule to enhance antibody dependent cellular cytotoxicity (“ADCC”). Greater ADCC conveys greater potency for cancer cell killing effects. We expect the oncology pipeline to continue to grow via the Collaboration and Option Agreement with RubrYc, as well as the Company’s partnership with an antibody discovery firm Fair Journey (see Strategic Alliances, Collaborations, and Joint Ventures below for additional details).

Vaccines:

Human Health: SARS-CoV-2

Coronavirus disease 2019 (“COVID-19” or “COVID”) is an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). It was first identified in December 2019 in Wuhan, Hubei, China, and has resulted in an ongoing pandemic. Common symptoms include fever, cough, fatigue, shortness of breath or breathing difficulties, and loss of smell and taste. While most people have mild symptoms, some people develop acute respiratory distress syndrome (ARDS), possibly precipitated by cytokine dysregulation, multi-organ failure, septic shock, and blood clots.

The biopharmaceutical industry successfully and rapidly rose to the challenges of the COVID pandemic, delivering highly effective vaccines in record time. However, by the summer of 2021, many experts concluded that the COVID crisis is likely to be endemic to many regions around the world given the rapid emergence of SARS-CoV-2 variants requiring ongoing management and responsiveness. As a result, numerous unmet vaccination needs remain:

​
We initiated preclinical work on vaccine designs that might overcome some of the challenges associated with the first-generation vaccines that target only the spike protein of SARS-CoV-2.  In particular, we seek to design and

3

develop a second-gen vaccine that addresses the current durability, access, and variant-inclusion challenges we still face.

​

IBIO-202

Produced in iBio’s FastPharming System, IBIO-202 is a subunit vaccine candidate that targets the Nucleocapsid (N) protein of SARS-CoV-2.   Since the N protein is abundantly expressed during infection, contains immunogenic epitopes and is more highly conserved than the spike (“S’) protein among the viral variants; new viral variants may be less likely to escape vaccine protection.  IBIO-202 is adjuvanted to potentially allow for greater immunogenicity and/or dose sparing. An “N-only” vaccine may be highly complementary to existing first-generation, S protein-directed vaccines.

​
Initial pre-clinical studies of IBIO-202 demonstrated a robust, antigen-specific, memory T-cell response.  Immunization data are consistent with that, as a strong, cytotoxic, memory T-cell response was seen, rather than an inflammatory response. In addition, T-cell priming was achieved via both intramuscular and intranasal administration, allowing for the further exploration of multiple routes of administration and their respective benefits.

​
In September 2021, iBio submitted a pre-IND package for IBIO-202 with the intent to move its novel vaccine candidate into the clinic. Additionally, the Company recently filed four provisional patent applications with the U.S. Patent and Trademark Office related to the program. 

​

Animal Health: Classical Swine Fever

Classical swine fever (“CSF”) is a contagious, often fatal disease affecting both feral and domesticated pigs. Outbreaks in Europe, Asia, Africa, and South America have not only adversely impacted animal health and food security but have also had severe socioeconomic impacts on both the pig industry worldwide and small-scale pig farming. Currently available vaccines can be efficient at triggering rapid animal immune response and protecting swine populations when combined with culling of infected pigs, but do not allow the differentiation of infected from vaccinated animals (DIVA), nor are they approved for use in the U.S. The development of DIVA compatible and efficacious vaccination solutions remains a top priority to prevent the economic impacts of a CSF outbreak including supply disruptions, export restrictions and reduced food security.

IBIO-400

In collaboration with the Institute of Infectious Animal Diseases at Texas A&M University and the Kansas State University, iBio used the FastPharming System to develop a potentially safe and protective DIVA-capable subunit vaccine³.

The antigen is formulated in cost-effective oil-in-water emulsion adjuvants. IBIO-400 studies have shown that after single-dose vaccination, the adjuvanted, plant-made CSF E2 subunit vaccine provides complete protection in challenged pigs and is accompanied by strong virus neutralization antibody responses.

Further efficacy and safety studies are being planned using cGMP material. Also, efforts are underway to secure required United States Department of Agriculture (“USDA”) regulatory approvals for IBIO-400.

³ Laughlin, R.C. et al. (2019) “Plant‐made E2 glycoprotein single‐dose vaccine protects pigs against classical swine fever.” Plant Biotechnol J. 17(2):410-420]

4

Bioprocess segment

Services:

iBio uses its proprietary FastPharming Expressions System and know how to develop or manufacture recombinant proteins on a contract basis for third parties, as well as to support our own biopharmaceutical development initiatives. iBio generated $2.4 million in revenue from its CDMO service offerings for the year ended June 30, 2021. Fiscal year 2021 revenue increased 50% over revenue of $1.6 million from the year ended June 30, 2020. iBio’s Services now include:

​

We expect our Services business to deliver synergies with our Biopharmaceutical Segment, as in some cases it may allow us to identify in-licensing opportunities.  Similarly, there may be opportunities for leverage with our Products business, as demonstrated by our relationship with Safi Biosolutions, Inc., in which we have the opportunity to selectively add certain recombinant proteins from that collaboration to our own catalog of products.

​
Products: Research & Bioprocess

iBio is developing sustainably produced recombinant proteins for use in cutting-edge research and cGMP biomanufacturing where the demand for high-quality proteins is strong. During the year ended June 30, 2021, we launched our new e-shop and the first four research use-only [RUO] products in our RBP portfolio. We plan to continue to add new RUO products as well as proteins intended for further cGMP manufacturing use [FMU] over time.  We expect to offer standard catalog products and accept custom new product requests for a variety of applications, including:

​

5

Our new RBP business may create synergies with our Services business, as the ready availability of catalog products facilitates lead generation for contract development or manufacturing services.

FastPharming

The FastPharming System is iBio’s proprietary approach to plant-made pharmaceutical and protein production. It uses hydroponically-grown, transiently-transfected plants, (typically Nicotiana benthamiana, a relative of the tobacco plant), novel expression vectors, a large-scale transient transfection method, and other technologies that can be used to produce complex therapeutic proteins emerging from our own, our clients’ and our potential clients’ pipelines.

The FastPharming System offers several potential advantages versus traditional mammalian cell expression systems, including:

The FastPharming System has been established in iBio’s 130,000 square foot facility in Bryan, Texas. The process begins with robotic seeding of iBio’s plants into an inert matrix for hydroponic cultivation under optimized LED lighting conditions. While the plants grow, FastPharming vectors carrying the genes encoding the desired protein product are developed and then loaded into a bacterial host (Agrobacterium tumefaciens). Then, the bacteria carrying the vectors and DNA for producing the desired protein are introduced into the leaves of the plants via an automated vacuum infiltration process. The vectors introduce the DNA into the plant nucleus, where it is coded into instructions that direct the plant’s own cellular machinery to make the desired protein. A specific arrangement of genes for plant viral enzymes causes these protein production instructions to be copied hundreds of thousands of times in each plant cell. Thus, as the plants continue growing for about another week, the gene transfer vectors combine the desirable features of the DNA mobilization plasmid, with gene control elements taken from single-stranded RNA plant viruses, to produce the encoded protein in abundance. With the target protein accumulated in the leaves, the plants are harvested, and the bulk drug substance is purified via traditional methods.

6

In the FastPharming System, no animal- or human-derived materials are used, decreasing the risk of product contamination with mammalian viruses or prions. In place of animal-origin raw materials, green plants, grown under clean and controlled conditions, provide for the expression of proteins. This portion of the bioprocess uses raw materials readily available to us, decreasing certain supply chain risks.

By incorporating transient gene expression technology, the FastPharming System can rapidly deliver high quality proteins for clinical use without several of the time-consuming steps that competitive mammalian-cell based expression systems require, such as the need to i) isolate a high-producing cell clone from millions of non-productive cells, ii) establish a master cell bank, and iii) grow the clonal cells in a sterile fermenter to start the manufacturing process. This speed and cost advantage may allow iBio the opportunity to test more pipeline opportunities and generate results quicker than conventional approaches. In addition to saving months of development time associated than traditional production platforms, iBio believes that the use of plants as bioreactors may be more environmentally friendly than mammalian cell culture protein expression systems. Traditional protein expression systems require large volumes of water-for-injection [WFI] that is energy-intensive to produce.  Also, many modern cell culture production systems rely heavily upon single-use plastic consumables for their operations. The combination may contribute to the finding that in 2015, the pharmaceutical industry’s emission intensity was about 55% higher than that of the automotive industry⁴. Given that our process, plants, which fix carbon, are at the heart of the process and the use of disposable plastics is minimized.

​

iBio seeks to continuously improve the FastPharming System via incremental and step changes in process to ensure additional advantages are incorporated as technology changes for bioprocessing.

Strategic Alliances, Collaborations, and Joint Ventures

iBio has formed collaborations and strategic alliances to gain access to funding, capabilities, technical resources and intellectual property to further its development efforts, commercialize its technology and to generate revenues, including through the development and manufacture of products at iBio’s FastPharming Facility.

⁴ Belkhir, L., et. al. (2018) “Carbon footprint of the global pharmaceutical industry and relative impact of its major players”. J Cleaner Production 214:185-194

7

Several agreements with RubrYc Therapeutics, Inc.

On August 23, 2021, we entered into a series of agreements with RubrYc Theraputics, Inc. (“RubrYc”) described in more detail below

Collaboration and License Agreement: We entered into a collaboration and licensing agreement (the “RTX-003 License Agreement”) with RubrYc. to further develop RubrYc’s immune-oncology antibodies in its RTX-003 campaign.  Under the terms of the agreement, we will be solely responsible for worldwide research and development activities for development of the RTX-003 antibodies for use in pharmaceutical products in all fields. Contingent upon receipt by RubrYc of funding of its Series A-2 preferred stock offering (see below), during the term of the RTX-003 License Agreement, RubrYc granted us an exclusive worldwide sublicensable royalty-bearing license under the patents controlled by RubrYc that cover the RTX-003 antibodies. The commercial license exclusively permits us to research, develop, make, have made, manufacture, use, distribute, sell, offer for sale, import, and export antibodies in RubrYc’s RTX-003. Under the terms and conditions of the RTX-003 License Agreement, we agreed to use commercially reasonable efforts to develop and commercialize RTX-003 antibodies. If we fail to achieve certain timing milestones for starting GMP manufacturing and dosing human patients under an IND, we could be required to make a payment to RubrYc on the date the milestone is missed and on each anniversary of such date until the milestone is achieved, provided that the milestone was missed due to our failure to exercise commercially reasonable efforts.

​

Under the terms of the RTX-003 License Agreement, RubrYc is eligible to receive from us up to an aggregate of $15 million in clinical development and regulatory milestone payments for RTX-003 upon achievement of the following four clinical milestones:

RubrYc will also be entitled to receive royalties in the mid-single digits on net sales of RTX-003 antibodies, subject to adjustment under certain circumstances. Royalties are payable on a country-by-country basis until the latest to occur of: (i) the last-to-expire of specified patent rights in such country; (ii) expiration of marketing or regulatory exclusivity in such country; or (iii) ten (10) years after the first commercial sale of a product in such country, provided that no biosimilar product has been approved in such country.

If either we or RubrYc materially breaches the RTX-003 License Agreement and does not cure such breach within 60 days (or 30 days in the event of non-payment), the non-breaching party may terminate the RTX-003 License Agreement in its entirety. Either party may also terminate the RTX-003 License Agreement, effective immediately upon written notice, if the other party files for bankruptcy, is dissolved or has a receiver appointed for substantially all of its property. RubrYc may terminate the RTX-003 License Agreement if we or our sublicensees challenges the validity or enforceability of any of RubrYc’s Licensed Patents subject to certain exceptions. We may terminate the RTX-003 License Agreement in its entirety for any or no reason upon ninety (90) days’ written notice to RubrYc. In addition, if RubrYc is unable to complete a financing with proceeds of a certain agreed upon amount by a set time defined in the RTX-003 License Agreement, we may terminate the RTX-003 License Agreement upon written notice to RubrYc within thirty (30) days of the end of such period. Effective upon such termination, among other things, RubrYc shall assign to us exclusive ownership of the RTX-003, including all relevant intellectual property rights.

8

Collaboration, Option and License Agreement: We entered into an agreement with RubrYc to collaborate for up to five years to discover and develop novel antibody therapeutics using RubrYc’s artificial intelligence discovery platform. Antibody targets for the collaboration may be agreed upon pursuant to written collaboration plans approved by a joint steering committee comprised of two representatives of each party. In addition, RubrYc has granted us an exclusive option to obtain a worldwide sublicensable commercial license with respect to each of the lead product candidates resulting from such collaboration programs (the “Selected Compounds”). We have agreed to pay RubrYc for each Selected Compound as it achieves various milestones in addition to royalties if the Selected Compounds are commercialized. We have agreed to pay RubrYc for each Selected Compound as it achieves various milestones in addition to royalties we would owe if it were commercialized. Under the terms and conditions of the Collaboration Agreement, in the event the option is exercised by us, we have various diligence obligations including that we will use commercially reasonable efforts to (i) develop Selected Compounds for use in pharmaceutical products (the “Collaboration Products”); and (ii) commercialize the Collaboration Products. We are also required to meet a series of development milestones for each Collaboration Product. Failure to achieve the milestones will result in a payment to RubrYc on the date the milestone is missed and on each anniversary of such date until the milestone is achieved, provided that the milestone was missed due to our failure to exercise commercially reasonable efforts.

​

​

Under the terms of the Collaboration Agreement, RubrYc is eligible to receive from us up to an aggregate of $15 million in clinical development and regulatory milestone payments for each Collaboration Product that achieves the following:

RubrYc will also be entitled to receive tiered royalties ranging from low- to mid-single digits on net sales of Collaboration Products, subject to adjustment under certain circumstances. Royalties are payable on a country-by-country and collaboration product-by-collaboration product basis until the latest to occur of: (i) the last-to-expire of specified patent rights in such country; (ii) expiration of marketing or regulatory exclusivity in such country; or (iii) ten (10) years after the first commercial sale of a product in such country, provided that no biosimilar product has been approved in such country.

If either we or RubrYc materially breaches the Collaboration Agreement and does not cure such breach within 60 days (or 30 days in the event of non-payment), the non-breaching party may terminate the Agreement in its entirety. Either party may also terminate the Collaboration Agreement, effective immediately upon written notice, if the other party files for bankruptcy, is dissolved or has a receiver appointed for substantially all of its property. RubrYc may terminate the Collaboration Agreement if we, our affiliates or our sublicensees challenges the validity or enforceability of any of RubrYc’s patents covering any of the licensed compounds or products. We may terminate the Collaboration Agreement in its entirety, or with respect to a program, collaboration or Selected Compound for any or no reason upon ninety (90) days’ written notice to RubrYc.

In addition, if RubrYc is unable to complete a financing with proceeds of a certain agreed upon amount by a set time defined in the Collaboration Agreement, we may terminate the Collaboration Agreement upon written notice to RubrYc within thirty (30) days of the end of such period. Effective upon such termination, among other things, RubrYc shall assign to us exclusive ownership of the Collaboration Hit Candidates (as defined in the Collaboration Agreement) that are in the then-current (un-terminated) discovery collaboration plans, including all relevant intellectual property rights.

​

9

Stock Purchase agreement: In connection with the entry into the Collaboration Agreement and RTX-003 License Agreement, we also entered into a Stock Purchase Agreement (“Stock Purchase Agreement”) with RubrYc whereby we purchased 1,909,563 shares of RubrYc’s Series A-2 preferred stock “Series A-2 Preferred”) for $5,000,000 and agreed to acquire an additional 954,782 shares of RubrYc’s Series A-2 Preferred for $2,500,000 in the event certain conditions set forth in the Stock Purchase Agreement are satisfied as of December 1, 2021. In connection with the Stock Purchase Agreement, we entered into the RubrYc Therapeutics, Inc. Second Amended and Restated Investors’ Rights Agreement (the “Investors’ Rights Agreement”), RubrYc Therapeutics, Inc. Second Amended and Restated Voting Agreement (the “Voting Agreement”) and the RubrYc Therapeutics, Inc. Second Amended and Restated Right of First Refusal and Co-Sale Agreement (the “Right of First Refusal and Co-Sale Agreement”).

The rights, preferences of and privileges of the RubrYc Series A-2 Preferred Stock (“Series A-2 Preferred”) are set forth in the Third Amended and Restated Certificate of Incorporation of RubrYc Therapeutics, Inc. (the “Amended RubrYc COI”), and include a preferential eight percent (8%) dividend, senior rights on liquidation, the right to elect a Series A-2 Preferred director for as long as the Company holds at least 1,500,000 shares of RubrYc stock, the right to vote on an as-converted basis, certain anti-dilution and other protective provisions, the right to convert the Series A-2 Preferred into shares of RubrYc common stock at our option, and mandatory conversion of the Series A-2 Preferred into shares of RubrYc common stock upon (a) the closing of a firm-commitment underwritten public offering to the public pursuant to an effective registration statement under the Securities Act of 1933, as amended, for shares of RubrYc common stock at a per share price of at least five (5) times the Series A-2 Original Issue Price (as defined in the Amended RubrYc COI) and resulting in at least $30,000,000 of gross proceeds to RubrYc or (b) such other date, time or event, specified by vote or written consent of the majority of the aggregate voting power, on an as-converted basis, of the RubrYc Series A preferred stock (“Series A Preferred” and together with the Series A-2 Preferred, the “Senior Preferred Stock”) and Series A-2 Preferred. The Right of First Refusal and Co-Sale Agreement gives RubrYc the right of first refusal on stock sales by key holders, generally defined as founders, and a second right of first refusal and a co-sale right to specified other investors, including certain holders of Senior Preferred Stock and the Company.

The Investors’ Rights Agreement provides the holders of Senior Preferred Stock with, among things: (i) demand registration rights, under specified circumstances; (ii) piggyback registration rights in the event of a company registered offering; (iii) lock-up and market-standoff obligations following a registered underwritten public offering; (iv) preemptive rights on company offered securities; and (v) additional protective covenants that require the approval at least two of the three directors elected by the holders of the Senior Preferred Stock.

Pursuant to the Voting Agreement, certain RubrYc stockholders are contractually obligated to, among other things, vote for and maintain the authorized number of directors at five members, one of which the Company has the contractual right to elect subject to the conditions set forth above.

​

License with University of Pittsburgh (“UP”)

On January 14, 2014 (the “Effective Date”), we entered into an exclusive worldwide License Agreement with UP which was amended on August 11, 2016 and December 2, 2020 (the “Exclusive License Agreement”) covering all of the U.S. and foreign patents and patent applications and related intellectual property owned by UP pertinent to the use of endostatin peptides for the treatment of human and veterinary fibrosis (the “Field”). We paid an initial license fee of $20,000 and we are required to pay all of UP’s patent prosecution costs that were incurred prior to, totaling $30,627, and subsequent to the Effective Date. On each anniversary date we are to pay license fees ranging from $25,000 to $150,000 for the first five years and $150,000 on each subsequent anniversary date until the first commercial sale of the licensed technology. Beginning with commercial sales of the technology or approval by the FDA or foreign equivalent, the Company will be required to pay milestone payments, royalties and a percentage of any non-royalty sublicense income to UP. Under the terms of the Exclusive License Agreement, UP is also eligible to receive from us up to an aggregate of $1,000,000 in clinical development and regulatory milestone payments. UP will also be entitled to receive low single-digit tiered royalties on sales of products containing the licensed technology, with a minimum annual royalty once sales commence. In the event that we are required to license intellectual property rights owned by a third-party to make, use, or sell licensed technology in the Field in order to avoid infringing the patent or other intellectual property rights of such third-party, then subject to certain conditions, we will be entitled to a credit of such third-party royalties against royalties due to UP. Under the terms and conditions of the Exclusive License Agreement, we have agreed to use our best efforts to bring the licensed

10

technology to market as soon as practicable, consistent with sound and reasonable business practice and judgment, and to continue active, diligent marketing efforts for the licensed technology throughout the term of the Exclusive License Agreement. In addition, the Exclusive License Agreement sets forth specific milestone completion deadlines including filing an investigational new drug application by December 31, 2021, enrollment of first patient in a Phase 1 clinical trial by March 31, 2022, enrollment of first patient in a Phase 2 clinical trial by June 30, 2023, enrollment of first patient in a Phase 3 clinical trial by June 30, 2026 and filing of a Biologics License Application or foreign equivalent by December 21, 2029. We are also required to meet certain diligence milestones. We are unlikely to file an investigational new drug application by December 31, 2021 so we have engaged in discussion with UP to extend the deadlines. We don’t know if or on what terms we will be able to extend the deadlines.

If we breach the Exclusive License Agreement and do not cure such breach within 30 days of receipt of notice, the UP may terminate the Exclusive License Agreement in its entirety. UP may also terminate the Exclusive License Agreement, effective immediately, if we file for bankruptcy, are dissolved or have a receiver appointed for substantially all of our property.

Planet Biotechnologies: ACE2-Fc

After reviewing our internal strategy, we have decided to terminate the partnership with Planet Biotechnologies, Inc. for the development of the recombinant ACE2-Fc protein as treatment for COVID-19 and other coronavirus diseases.  As part of our original agreement, no payments are due to Planet at the time of termination.  

​

FastPharming Facility Joint Venture with Eastern Capital Limited

iBio CDMO’s operations take place in Bryan, Texas in a 130,000 square-foot cGMP manufacturing facility controlled by an affiliate (the “Second Eastern Affiliate”) of Eastern Capital Limited (“Eastern”), a former significant stockholder of ours, as sublandlord (the “Sublandlord”). The facility is a Class A life sciences building located on land owned by the Texas Agricultural and Mechanical College of Texas (“Texas A&M”) system designed and equipped for the manufacture of plant-made biopharmaceuticals. The Sublandlord granted iBio CDMO a 34-year lease for the facility that expires in 2050.

On December 16, 2015, we formed iBio CDMO as a Delaware limited liability company to develop and manufacture plant-made pharmaceuticals. On January 13, 2016, we entered into a contract manufacturing joint venture with an affiliate of Eastern (the “Eastern Affiliate”). The Eastern Affiliate contributed $15 million in cash for a 30% interest in iBio CDMO. We retained a 70% interest in iBio CDMO and granted iBio CDMO a non-exclusive license to use our proprietary technologies for research purposes and an exclusive U.S. license for manufacturing purposes. We retained the exclusive right to grant product licenses to those who wish to sell or distribute products made using our technology. On February 23, 2017, we entered into an exchange agreement with the Eastern Affiliate, pursuant to which we acquired substantially all of the interest held by the Eastern Affiliate in iBio CDMO and issued one share of our iBio CMO Preferred Tracking Stock, par value $0.001 per share. After giving effect to the transaction, we own 99.99% of iBio CDMO. At any time, at our election or the election of the Eastern Affiliate, the outstanding share of iBio CMO Preferred Tracking Stock may be exchanged for 29,990,000 units of limited liability company interests of iBio CDMO. Following such exchange, we would own a 70% interest in iBio CDMO and the Eastern Affiliate would own a 30% interest.

See Notes 1, 15 and 16 in the consolidated financial statements for a further discussion.

Commercial activities commenced in January 2016 with most of our initial efforts directed towards recommissioning the facility to help meet cGMP manufacturing standards and provisions for iBio’s service offerings. The facility houses laboratory and pilot-scale operations, as well as large-scale automated hydroponic systems capable of growing more than four million plants and delivering dozens of kilograms of protein per year

11

Intellectual Property

We currently own or license 102 patents, of which 96 are owned and 6 are licensed. Of the 102 patents we own, 24 are U.S. and 72 are international. We have an exclusive license to 6 U.S. patents. Additionally, we have 7 U.S., 1 Patent Cooperation Treaty, and 11 international applications pending. International patents and applications include numerous foreign countries including Australia, Brazil, Canada, China, Hong Kong, India, Korea, and several countries in Europe. In the U.S. our patents expire between 2023 and 2036. Outside the US these patents expire between 2023 and 2036.

We exclusively own the right to use certain intellectual property acquired by or developed at Fraunhofer for human health and certain veterinary and diagnostic applications. We also own intellectual property developed or acquired independently of Fraunhofer.

In addition, we have an exclusive worldwide license agreement with the University of Pittsburgh covering U.S. and foreign patents and patent applications and related intellectual property co-owned with the University of Pittsburgh and the Medical University of South Carolina pertinent to the use of endostatin peptides for the treatment of fibrosis.

Our success will depend in part on our ability to obtain and maintain patent protection for our technologies and products and to preserve our trade secrets. Our policy is to seek to protect our proprietary rights, by among other methods, filing patent applications in the U.S. and foreign jurisdictions to cover certain aspects of our technology. We continue to prepare patent applications relating to our expanding technology in the U.S. and abroad.

The technology and products covered by our issued and pending patent applications are summarized below:

Technology and Product Patents (U.S.)

Pending Technology Patent Applications (U.S. and International)

Pending Product Patent Applications (U.S. and International)

12

Competition

The biotechnology and pharmaceutical industries are characterized by rapidly advancing technologies, intense competition and a strong emphasis on proprietary products.

We face competition from many different sources, including commercial pharmaceutical and biotechnology enterprises, academic institutions, government agencies, and private and public research institutions. Our commercial opportunities will be reduced or eliminated if our competitors develop and commercialize products that are safer, more effective, have fewer side effects or are less expensive than any products that we or our collaborators may develop based on the use of our technologies.

Our competition in the CDMO market includes a number of full-service contract manufacturers and large pharmaceutical companies offering third-party development and manufacturing services to fill their excess capacity. Large pharmaceutical companies have been seeking to divest portions of their manufacturing capacity, and any such divested businesses may compete with us in the future. In addition, most of our competitors may have substantially greater financial, marketing, technical or other resources than we do. Moreover, additional competition may emerge and may, among other things, result in a decrease in the fees paid for our services, which would affect our results of operations and financial condition.

While we believe that the potential advantages of our new technologies will enable us to compete effectively against other providers of technology for biologic product development and manufacturing, many of our competitors have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, clinical trials, regulatory approvals and marketing approved products than we do. Smaller or early-stage companies may also prove to be significant competitors, particularly through arrangements with large and established companies, and this may reduce the value of our technologies for the purposes of establishing license agreements. In addition, these third parties compete with us in recruiting and retaining qualified scientific and management personnel, establishing clinical trial sites and patient registration for clinical trials, as well as in acquiring technologies and technology licenses complementary to our programs or advantageous to our business.

We expect to rely upon licensees, collaborators or customers for support in advancing certain of our drug candidates and intend to rely on additional work with our collaborators during our efforts to commercialize our product candidates. Our licensees, collaborators or customers may be conducting multiple product development efforts within the same disease areas that are the subjects of their agreements with us. Agreements with collaborators may not preclude them from pursuing development efforts using a different approach from that which is the subject of our agreement with them. Any of our drug candidates, therefore, may be subject to competition with a drug candidate under development by a customer.

There are currently approved vaccines and therapies for many of the diseases and conditions addressed by the product candidates our clients and collaborators may be developing or manufacturing or in our own pipeline. Technological developments in our field of research and development occur at a rapid rate and we expect competition to intensify as advances in this field are made. We will be required to continue to devote substantial resources and efforts to our research and development activities.

13

As a biopharmaceutical company with a focus on cancer therapeutics, we compete with a broad range of companies. At the highest level, our therapeutics can be seen as both a complement and a potential competitor to any oncology therapy, most notably chemotherapy, radiotherapy, biologics and small molecule drugs. Not only do we compete with companies engaged in various cancer treatments including radiotherapy and chemotherapy, but we also compete with various companies that have developed or are trying to develop immunology vaccines for the treatment of cancer. Certain of our competitors have substantially greater capital resources, large customer bases, broader product lines, sales forces, greater marketing and management resources, larger research and development staffs with extensive facilities and equipment than we do and have more established reputations as well as global distribution channels. Our most significant competitors, among others, are fully integrated pharmaceutical companies such as Eli Lilly and Company, Bristol-Myers Squibb Company, Merck & Co., Inc., Novartis AG, MedImmune, LLC (a wholly owned subsidiary of AstraZeneca plc), Johnson & Johnson, Pfizer Inc., MerckKGaA and Sanofi SA, and more established biotechnology companies such as Genentech, Inc. (a member of the Roche Group), Amgen Inc., Gilead Sciences, Inc. and its subsidiary Kite Pharma, Inc., and competing cancer immunotherapy companies such as, Bluebird Bio, Inc., Transgene SA, Bausch Health Companies, NewLink Genetics Corporation, Agenus Inc., Aduro Biotech, Inc., Advaxis, Inc., ImmunoCellular Therapeutics, Ltd., IMV Inc., Oxford BioMedica plc, Bavarian Nordic A/S, Celldex Therapeutics, Inc., and others, some of which have substantially greater financial, technical, sales, marketing, and human resources than we do. These companies might succeed in obtaining regulatory approval for competitive products more rapidly than we can for our products. In addition, competitors might develop technologies and products that are less expensive, safer or more effective than those being developed by us or that would render our technology obsolete. In addition, the pharmaceutical and biotechnology industry is characterized by rapid technological change. Because our research approach integrates many technologies, it may be difficult for us to remain current with the rapid changes in each technology. If we fail to stay at the forefront of technological change, we may be unable to compete effectively. Our competitors may render our technologies obsolete by advancing their existing technological approaches or developing new or different approaches.

Additionally, as we are developing IBIO-100 for Systemic scleroderma and for IPF we will face competition from several candidates that are either commercialized or in late-stage clinical trials. These candidates are sponsored by large, multinational biopharmaceutical companies with greater capital resources. Much like in the oncology space, we will compete with the likes of Roche, Boehringer Ingelheim, Gilead and BMS in big Pharma; while trying to beat out small biotechs such as Lung therapeutics, Veritex, and Horizon Therapeutics. These companies might succeed in obtaining regulatory approval for competitive products more rapidly than we can for our products. In addition, competitors might develop technologies and products that are less expensive, safer or more effective than those being developed by us or that would render our technology obsolete.

Specifically, with respect to the development of COVD-19 biopharmaceuticals, there are over 231 vaccines in various stages of development, and 612 therapeutics, according to the Biotechnology Innovation Organization. Several of those candidates are in late-stage clinical trials and are sponsored by large, multinational biopharmaceutical companies, some of whom have also received government funding. There are also a number of companies working to develop new drugs and other therapies for diseases of commercial interest to us that are undergoing various stages of testing including clinical trials. The key competitive factors affecting the success of our technologies for commercial product candidates are likely to be efficacy, safety profile, price, and convenience.  We have competition with the first to market companies such as Pfizer, Moderna and AstraZeneca; while other big pharmaceuticals such as GSK and Sanofi continue to develop their late-stage drugs.

Research and Development

Our research and development functions are focused on the creation of new products and services, as well as enhancements to our existing offerings, both of which are necessary to maintain our competitive position. Our research and development activities take place primarily at our facilities in Bryan, Texas currently. However, iBio has subsequently announced it has leased lab and office space in San Diego for the purpose of conducting research.

14

Suppliers

We outsource certain functions and supplies to third parties such as Charles River Laboratories, Sartorius, Repligen, Cytiva, and Purolite. While we rely on our outsourcing partners to perform their contracted functions, we are continuing to build internal capabilities. Our suppliers are generally available to meet our demands and supply requirements, but our items are long lead time items that have been exacerbated by the current macro environment due to increased demand.  We continue to mitigate the risks through inventory management, relationship management and evaluation of alternative sources when possible. Refer to Item 1A, “Risk Factors,” for a description of risks associated with our reliance on suppliers and outsourcing partners.

Backlog

Our backlog consists primarily of orders for which we have entered into a Master Services Agreement with an accompanying Statement of Work (“SOW”). Our backlog was approximately $0.8 million as of June 30, 2021.

Government Regulation and Product Approval

Regulation by governmental authorities in the U.S. and other countries is a significant factor in the development, manufacturing and marketing of pharmaceutical drugs and vaccines.

U.S. Drug Approval Process

All of the vaccine and therapeutic products developed from our technologies will require regulatory approval by governmental agencies prior to commercialization. In particular, pharmaceutical drugs and vaccines are subject to rigorous preclinical testing and clinical trials and other pre-marketing approval requirements by the U.S. Food and Drug Administration (“FDA”) and regulatory authorities in other countries. In the U.S., various federal, and, in some cases, state statutes and regulations, also govern or impact the manufacturing, safety, labeling, storage, record-keeping and marketing of vaccines and pharmaceutical products. The lengthy process of seeking required approvals and the continuing need for compliance with applicable statutes and regulations requires the expenditure of substantial resources. Regulatory approval, if and when obtained for any of our product candidates, may be limited in scope, which may significantly limit the indicated uses for which our product candidates may be marketed. Further, FDA approved vaccines and drugs are subject to ongoing oversight and discovery of previously unknown problems may result in restrictions on their manufacture, sale or use, or in their withdrawal from the market.

The process required by the FDA before a drug or biological product may be marketed in the United States generally involves the following:

15

Preclinical Tests

Before any product candidates with potential immunization or therapeutic value may be tested in human subjects, we must satisfy stringent government requirements for preclinical studies. Preclinical testing includes both in vitro and in vivo laboratory evaluation and characterization of the safety and efficacy of the product candidate. “In vitro” refers to tests conducted with cells in culture and “in vivo” refers to tests conducted in animals. The conduct of the preclinical tests must comply with federal regulations and requirements including GLP. Preclinical testing results obtained from studies in several animal species, as well as data from in vitro studies, are submitted to the FDA as part of an IND application and are reviewed by the FDA prior to the commencement of human clinical trials. These preclinical data must provide an adequate basis for evaluating both the safety and the scientific rationale for the initial clinical trials. In the case of vaccine candidates, animal immunogenicity and immune protection tests must establish a sound scientific basis to believe that the product candidate may be beneficial when administered to humans.

IND

An IND becomes effective automatically 30 days after receipt by the FDA unless the FDA raises concern or questions about the conduct of the clinical trials as outlined in the IND prior to that time. In such an event, the IND sponsor and the FDA must resolve any outstanding concerns before clinical trials may proceed. For additional information on the most recent FDA regulations and guidance on vaccine and therapeutic product testing and approval, visit its website at http://www.fda.gov. The FDA may also impose clinical holds on a product candidate at any time before or during clinical trials due to potential safety concerns or non-compliance. If the FDA imposes a clinical hold, trials may not recommence without FDA authorization and then only under terms authorized by the FDA. Accordingly, we cannot be sure that submission of an IND will result in the FDA allowing clinical trials to begin, or that, once begun, issues will not arise that suspend or terminate such trials.

Clinical Trails

Clinical trials involve the administration of the product candidate to healthy volunteers or patients under the supervision of qualified investigators, generally physicians not employed by or under the trial sponsor’s control. Clinical trials are conducted under protocols detailing, among other things, the objectives of the clinical trial, dosing procedures, subject selection and exclusion criteria, and the parameters to be used to monitor subject safety, including stopping rules that assure a clinical trial will be stopped if certain adverse events should occur. Each protocol and any amendments to the protocol must be submitted to the FDA as part of the IND. Clinical trials must be conducted and monitored in accordance with the FDA’s regulations composing the good clinical practice requirements, including the requirement that all research subjects provide informed consent. Further, each clinical trial must be reviewed and approved by an independent institutional review board, or IRB at or servicing each institution at which the clinical trial will be conducted. An IRB is charged with protecting the welfare and rights of trial participants and considers such items as whether the risks to individuals participating in the clinical trials are minimized and are reasonable in relation to anticipated benefits. The IRB also approves the form and content of the informed consent that must be signed by each clinical trial subject or his or her legal representative and must monitor the clinical trial until completed. Human clinical trials involving biological products are typically conducted in three sequential phases that may overlap or be combined:

16

During all phases of clinical development, regulatory agencies require extensive monitoring and auditing of all clinical activities, clinical data, and clinical trial investigators. Annual progress reports detailing the results of the clinical trials must be submitted to the FDA. Written IND safety reports must be promptly submitted to the FDA and the investigators for serious and unexpected adverse events, any findings from other studies, tests in laboratory animals or in vitro testing that suggest a significant risk for human subjects, or any clinically important increase in the rate of a serious suspected adverse reaction over that listed in the protocol or investigator brochure. The sponsor also must notify the FDA of any unexpected fatal or life-threatening suspected adverse reaction within seven calendar days after the sponsor’s initial receipt of the information. Phase 1, Phase 2 and Phase 3 clinical trials may not be completed successfully within any specified period, if at all. The FDA or the sponsor or its data safety monitoring board may suspend or terminate a clinical trial at any time on various grounds, including a finding that the research subjects are being exposed to an unacceptable health risk. Similarly, an IRB can suspend or terminate approval of a clinical trial at its institution if the clinical trial is not being conducted in accordance with the IRB’s requirements or if the biological product has been associated with unexpected serious harm to subjects.

Concurrently with clinical trials, companies usually complete additional studies and must also develop additional information about the physical characteristics of the biological product as well as finalize a process for manufacturing the product in commercial quantities in accordance with cGMP requirements. The manufacturing process must be capable of consistently producing quality batches of the product candidate and, among other criteria, the sponsor must develop methods for testing the identity, strength, quality, potency and purity of the final biological product. Additionally, appropriate packaging must be selected and tested, and stability studies must be conducted.

Many other countries in which iBio might choose to develop drugs or run clinical trials have similar rules and regulation. Although many of the issues discussed above with respect to the United States apply similarly in the context of the European Union or other foreign countries, the approval process varies between countries and jurisdictions and can involve additional product testing and additional administrative review periods. The time required to obtain approval in other countries and jurisdictions might differ from and be longer than that required to obtain FDA approval. Regulatory approval in one country or jurisdiction does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country or jurisdiction may negatively impact the regulatory process in others.

17

Overall potential risks:

Although we are still in preclinical stages, we potentially could have some risks associated with commercializing a product.  These risks include but are not limited to:

Post-Approval Requirements:  

Other U.S. Healthcare Laws and Compliance Requirement:

Coverage, Pricing and Reimbursement

Foreign Regulation:

18

Orphan Drug Act

Under the Orphan Drug Act, the FDA may grant orphan designation to a drug or biologic intended to treat a rare disease or condition, which is generally a disease or condition that affects fewer than 200,000 individuals in the United States, and for which there is no reasonable expectation that the cost of developing and making available in the United States a drug for this type of disease or condition will be recovered from sales in the United States for that drug. Orphan drug designation must be requested before submitting an NDA or BLA. After the FDA grants orphan drug designation, the name of the sponsor, identity of the drug or biologic and its potential orphan use are disclosed publicly by the FDA. The orphan drug designation does not shorten the duration of the regulatory review or approval process, but does provide certain advantages, such as a waiver of Prescription Drug User Fee Act, or PDUFA, fees, enhanced access to FDA staff and potential waiver of pediatric research requirements.

If a product that has orphan drug designation subsequently receives the first FDA approval for the disease for which it has such designation, the product is entitled to orphan product exclusivity, which means that the FDA may not approve any other applications, including a full NDA, to market the same drug or biologic for the same indication for seven years, except in limited circumstances, such as a showing of clinical superiority to the product with orphan drug exclusivity. Orphan drug exclusivity does not prevent FDA from approving a different drug or biologic for the same disease or condition, or the same drug or biologic for a different disease or condition. Among the other benefits of orphan drug designation are tax credits for certain research and a waiver of the application user fee. A designated orphan drug may not receive orphan drug exclusivity if it is approved for a use that is broader than the indication for which it received orphan designation. In addition, exclusive marketing rights in the United States may be lost if the FDA later determines that the request for designation was materially defective or if the manufacturer is unable to assure sufficient quantities of the product to meet the needs of patients with the rare disease or condition.

Healthcare Regulations and Healthcare Reform

Healthcare regulation and pricing (included drug pricing) is complex, extensive, and dynamic around the world. In the United States and some foreign jurisdictions, there have been, and likely will continue to be, a number of legislative and regulatory changes and proposed changes regarding the healthcare system directed at broadening the availability of healthcare, improving the quality of healthcare, and containing or lowering the cost of healthcare. We expect that there will continue to be a number of federal and state proposals to implement government pricing controls and limit the growth of healthcare costs.

We cannot predict what healthcare reform initiatives may be adopted in the future. Further federal, state and foreign legislative and regulatory developments are likely, and we expect ongoing initiatives to increase pressure on drug pricing. Such reforms could have an adverse effect on anticipated revenues from product candidates and may affect our overall financial condition and ability to develop product candidates.

19

We anticipate that current and future U.S. legislative healthcare reforms may result in additional downward pressure on the price that we receive for any approved product, if covered, and could seriously harm our business. For example, it is possible that additional government action is taken in response to the COVID-19 pandemic. Any reduction in reimbursement from Medicare and other government programs may result in a similar reduction in payments from private payors.

CDMO Regulatory Requirements

iBio CDMO’s operations are subject to a variety of environmental, health and safety laws and regulations, including those of the Environmental Protection Agency and equivalent local and state agencies. These laws and regulations govern, among other things, air emissions, wastewater discharges, the use, handling and disposal of hazardous substances and wastes, soil and groundwater contamination and employee health and safety. Any failure to comply with environmental, health and safety requirements could result in the limitation or suspension of production or monetary fines or civil or criminal sanctions, or other future liabilities. iBio CDMO is also subject to laws and regulations governing the destruction and disposal of raw materials and the handling and disposal of regulated material. In particular, we are subject to laws and regulations concerning research and development, testing, manufacturing processes, equipment and facilities, including compliance with current Good Manufacturing Practices (“cGMPs”), labeling and distribution, import and export, and product registration and listing. As a result, our facility is subject to regulation by the FDA, as well as regulatory bodies of other jurisdictions where our customers have marketing approval for their products.

Certain products manufactured by us involve the use, storage and transportation of toxic and hazardous materials. Our operations are subject to extensive laws and regulations relating to the storage, handling, emission, transportation and discharge of materials into the environment and the maintenance of safe working conditions. We maintain environmental and industrial safety and health compliance programs and training at our facilities. Prevailing legislation tends to hold companies primarily responsible for the proper disposal of their waste even after transfer to third party waste disposal facilities. Other future developments, such as increasingly strict environmental, health and safety laws and regulations, and enforcement policies, could result in substantial costs and liabilities to us and could subject the handling, manufacture, use, reuse or disposal of substances or pollutants at our facilities to more rigorous scrutiny than at present.

These regulatory requirements impact many aspects of our operations, including manufacturing, developing, labeling, packaging, storage, distribution, import and export and record keeping related to customers’ products. Noncompliance with any applicable regulatory requirements can result in government refusal to approve facilities for manufacturing products or products for commercialization.

Human Capital/Employees

As of June 30, 2021 we had 18 employees in iBio and 57 employees in iBio CDMO, 49 of which are full time employees. Our employees are not represented by any union and are not the subject of a collective bargaining agreement. We consider our relations with our employees to be good. We believe that we will need to continue to add staff during Fiscal 2022 in order to meet our new growth objectives for Therapeutic, Vaccine, and Research & Bioprocess proprietary product development.

We believe that our success depends upon our ability to attract, develop, retain and motivate key personnel. Our management and scientific teams possess considerable experience in drug discovery, research and development, manufacturing, clinical and regulatory affairs, and iBio directly benefits from this experience and industry knowledge.

We anticipate that we will need to identify, attract, train and retain other highly skilled personnel to pursue our development program. Hiring for such personnel is competitive, and there can be no assurance that we will be able to retain our key employees or attract, assimilate or retain the qualified personnel necessary for the development of our business.

We have no collective bargaining agreements with our employees and have not experienced any work stoppages. We consider our relations with our employees to be good. Management believes that it has sufficient human capital to operate its business successfully currently and will need to attract new talent to the organization in order to achieve its plans for growth.

20

Competitive Pay and Benefits. Our compensation programs are designed to align the compensation of our employees with our performance and to provide the proper incentives to attract, retain and motivate employees to achieve superior results. The structure of our compensation programs balances incentive earnings for both short-term and long-term performance. Specifically:  

Corporate Information

We were incorporated under the laws of the State of Delaware on April 17, 2008 under the name iBioPharma, Inc. We engaged in a merger with InB:Biotechnologies, Inc., a New Jersey corporation on July 25, 2008 and changed our name to iBio, Inc. on August 10, 2009.

Available Information

Our website address is www.ibioinc.com. We file Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements and other materials with the Securities and Exchange Commission, or SEC. We are subject to the informational requirements of the Exchange Act and file or furnish reports, proxy statements and other information with the SEC. Such reports and other information filed by the Company with the SEC are available free of charge on our website at www.ibioinc.com. Information contained on, or that can be accessed through, our website is not incorporated by reference into this Annual Report on Form 10-K, and you should not consider information on our website to be part of this Annual Report on Form 10-K.

The SEC also maintains a website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov.

​

Item 1A. Risk Factors

Summary Risk Factors

Our business faces significant risks and uncertainties of which investors should be aware before making a decision to invest in our common stock. If any of the following risks are realized, our business, financial condition and results of operations could be materially and adversely affected. The following is a summary of the more significant risks relating to the Company. A more detailed description of our risk factors is set forth below under the caption “Details Risk Factors.”

21

Risks Related to COVID-19

• We may continue to be impacted by the COVID-19 pandemic.

Risks Related to Our Financial Position and Need for Additional Capital

• We have incurred and expect to continue to incur significant losses.

• We anticipate that our expenses will increase in the future.

• We need additional funding to fully execute our business plan, which funding may not be available on commercially acceptable terms or at all.

• Raising additional capital may cause dilution to our existing stockholders and/or restrict our operations or rights.

• We have a limited operations as a CDMO and biopharmaceutical.

• Potential use of government funding for our R&D programs may impose requirements that limit our ability to take certain actions

• We may not have an adequate number of shares of common stock authorized to enable us to complete future equity financing transactions or strategic transactions, which may adversely affect our ability to grow and develop and may require us to rely on debt to fund our business plans.

​

Risks Related to the Development and Commercialization of Our Technologies and Product Candidates

• We currently have only four product candidates in early stages of pre-clinical development and are dependent on the success of these product candidates, which requires significant clinical testing before seeking regulatory approval.

• Our business could be significantly impacted if the products we manufacture do not gain market acceptance.

• There can be no guarantee that we will be able to successfully develop and commercialize product candidates.

• We may not be successful in our efforts to use iBio technologies to build a pipeline of product candidates.

• We or our clients, collaborators or licensees are dependent upon successful preclinical and clinical studies.

• If we, or our clients and collaborators, are not able to obtain required regulatory approvals, we, or our clients and collaborators, will not be able to commercialize our, or third-party, product candidates.

• Alternative technologies may supersede our technologies or make them noncompetitive.

• Our clinical product candidate may exhibit undesirable side effects, which may delay or preclude its development or regulatory approval, or limits use if ever approved.

• Our failure to receive or maintain regulatory approval for product candidates developed at our facility could negatively impact our revenue and profitability.

• Product liability lawsuits could cause us to incur substantial liabilities and to limit product commercialization.

• Any manufacturing problems at our facility could result in a delay or interruption in the supply of our clinical product.

​

Risks Related to Dependence on Third Parties

• If we are unable to establish new collaborations and maintain both new and existing collaborations, or if these collaborations are not successful, our business could be adversely affected.

• If third parties on whom we or our licensees will rely for the conduct of preclinical and clinical studies do not perform as required, we may not be able to obtain regulatory approval for or commercialize our product candidates.

• If revenue is concentrated on a few clients, we may be adversely impacted by the dependence upon those clients.

• Our inability to obtain such raw materials or supplies may adversely impact our business and results of operations.

• Any claims beyond our insurance coverage limits may result in substantial costs.

• We may be subject to various litigation claims and legal proceedings.

​

Risks Related to Intellectual Property

​

• If we or our licensors are unable to obtain and maintain sufficient patent protection for our technology and products, our ability to successfully commercialize our technology and products may be impaired.

• We may become involved in lawsuits to protect or enforce our patents or other intellectual property, which could be expensive, time-consuming and ultimately unsuccessful.

22

• Failure to comply with our obligations in the agreements under which we license intellectual property rights from third parties could result in a loss or intellectual property rights.

• Patent terms may be inadequate to protect our competitive position for an adequate amount of time.

• If we are unable to protect our trade secrets, our business and competitive position would be harmed.

• We may be subject to claims challenging the inventorship of our patent filings and other intellectual property.

• Intellectual property rights do not necessarily address all potential threats to our competitive advantage.

• We may not be able to protect our intellectual property rights throughout the world.

• If we should fail to comply with various patents laws, our patent protection could be reduced or eliminated.

• Changes in patent law could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents.

​

Risks Related to iBio’s Operations

​

• Our operating results will be adversely affected if we are unable to maximize our facility capacity utilization.

• A failure by iBio to hire and retain an appropriately skilled and adequate workforce could adversely impact the ability of the facility to operate and function efficiently.

• If we are unable to provide quality and timely offerings, our business and results of operations could suffer.

• Failure to comply with regulatory requirements could adversely affect our business and results of operations.

• If we are unable to provide quality and timely services to our customers, our business could suffer

• We may be unable to manage our future growth effectively, which could make it difficult to execute our business strategy.

• If we are unable to protect the confidentiality of our customers’ proprietary information, we may be subject to claims.

• We rely on third parties to supply the raw materials needed to operate our CDMO business and our research and development activities and do not have any long-term commitments from such suppliers.

• If we acquire companies, products or technologies, we may face integration risks and costs associated with those acquisitions that could negatively impact our business, results from operations and financial condition.

• We depend on key personnel and the loss of key personnel could harm our business and results of operations.

• We rely extensively on our information technology systems and are vulnerable to damage and interruption.

​

Risks Relating to Our Common Stock

​

• We are subject to compliance under the NYSE American continued listing standards of the NYSE American Company Guide, the failure of which can result in our delisting from the NYSE American.

• Provisions in our certificate of incorporation, bylaws and under Delaware law could discourage a takeover that stockholders may consider favorable.

• We do not anticipate paying cash dividends for the foreseeable future.

• The issuance of preferred stock could adversely affect the rights of the holders of shares of our common stock.

• The market price of our common stock has been and may continue to be volatile.

• Reports published by securities or industry analysts, could adversely affect our common stock price and trading volume.

• We are subject to reduced disclosure requirements applicable to smaller reporting companies.

• If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results or prevent fraud.

​

​

23

Detailed Risk Factors:

Our business faces many risks. Past experience may not be indicative of future performance, and as noted elsewhere in this Annual Report on Form 10-K, we have included forward-looking statements about our business, plans and prospects that are subject to change. Forward-looking statements are particularly located in, but not limited to, the sections “Business” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” In addition to the other risks or uncertainties contained in this Annual Report, the risks described below may affect our operating results, financial condition and cash flows. If any of these risks occur, either alone or in combination with other factors, our business, financial condition or operating results could be adversely affected and the trading price of our common stock may decline. Moreover, readers should note this is not an exhaustive list of the risks we face; some risks are unknown or not quantifiable, and other risks that we currently perceive as immaterial may ultimately prove more significant than expected. Statements about plans, predictions or expectations should not be construed to be assurances of performance or promises to take a given course of action.

COVID-19

We may continue to be impacted by the COVID-19 pandemic.

As a result of the pandemic, we have at times experienced reduced capacity to provide CDMO services as a result of instituting social distancing at work requirements in our Texas facility, restricting access to essential workers, as well as taking other precautions. We also experienced a full three-day operational shutdown in April 2020 for extensive facility cleaning following the discovery that an employee had contracted COVID-19, and successfully resumed operations on a reduced capacity basis. In addition, in order to avoid shortages of raw materials and other supplies experienced by other manufacturers we have increased our inventory of such materials; however, there can be no assurance that we will be able to avoid supply chain shortages in the future.  Although, to date our operations have not been materially adversely impacted by the COVID-19 pandemic and we do not currently anticipate operational difficulties due to the pandemic, the risk exists that further COVID-19 developments may negatively impact our operations if we should suffer supply chain shortages, absenteeism of workers or facility shutdowns due to the pandemic. Governmental restrictions, including travel restrictions, quarantines, shelter-in-place orders, business closures, new safety requirements or regulations, or restrictions on the import or export of certain materials, or other operational issues related to the COVID-19 pandemic may have an adverse effect on our business and results of operations. The evolving nature of the circumstances is such that it is impossible, at this stage, to determine the full and overall impact the COVID-19 pandemic may have, but it could further disrupt production and cause delays in the supply and delivery of products used in our operations, adversely affect our employees and disrupt our operations and manufacturing activities, all of which may have a material adverse effect on our business. We have ascertained that certain risks associated with further COVID-19 developments may adversely impact our operations and liquidity, and our business and share price may also be affected by the COVID-19 pandemic. However, we do not anticipate any significant threat to our operations at this point in time. Due to the general unknown nature surrounding the crisis, we cannot reasonably estimate the potential for any future impacts on our operations or liquidity.

In addition, we are developing vaccine for COVID. There is no assurance that our activities relating to the development of intellectual property in the field of vaccine candidate development for the SARS-CoV-2 virus, will result in the development of any successful product candidates or generate any proceeds or that we will be able to develop a vaccine in time for its use. These efforts are subject to the risks relating to the development and commercialization of our technologies and product candidates, risks relating to our intellectual property and other risks relating to our operations described in this Annual Report.

Risks Related to Our Financial Position and Need for Additional Capital

We have incurred significant losses since our inception. We expect to incur losses during our next fiscal year and may never achieve or maintain profitability.

Since our 2008 spinoff from Integrated BioPharma, we have incurred operating losses and negative cash flows from operations. Our net loss attributable to iBio Inc. was approximately $23.2 million and $16.4 million for 2021 and 2020, respectively. As of June 30, 2021, we had an accumulated deficit of approximately $173.6 million.

24

To date, we have financed our operations primarily through the sale of common stock, preferred stock and warrants. We have devoted substantially all of our efforts to research and development, including the development and validation of our technologies, our CDMO facilities, and the development of a proprietary therapeutic product against fibrosis and COVID-19 vaccines based upon our technologies. We have not completed development of or commercialized any vaccine or therapeutic product candidates. We expect to continue to incur significant expenses and may incur operating losses for at least the next year. We anticipate that our expenses and losses will increase substantially if we:

Our profitability in large part depends on our four research and development programs and our ability to successfully develop and commercialize our product candidates and to a lesser extent, our ability to generate revenue from our iBio CDMO services. This will require us, alone or with our licensees and collaborators, to be successful in a range of challenging activities, including completing preclinical testing and clinical trials of our product candidates, obtaining regulatory approval for these product candidates and manufacturing, marketing and selling those products for which regulatory approval is obtained or establishing collaborations with parties willing and able to provide necessary capital or other value. We may never succeed in these activities. We may never generate revenues that are significant or large enough to achieve profitability.

Even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. Our failure to become and remain profitable would diminish the value of our company and could impair our ability to raise capital, expand our business, diversify our product offerings or continue our operations. A decline in the value of our company could also cause you to lose all or part of your investment.

We anticipate that our expenses will increase in the future.

We expect our research and development expenses to increase significantly as our product candidates advance in clinical development, and as we add more employees. As part of the regulatory process, we must conduct clinical trials for each product candidate to demonstrate safety and efficacy to the satisfaction of the FDA and other regulatory authorities. The number and design of the clinical trials that will be required varies depending upon product candidate, the condition being evaluated and the trial results themselves. Therefore, it is difficult to accurately estimate the cost of the clinical trials. Clinical trials are very expensive and difficult to design and implement, in part because they are subject to rigorous regulatory requirements. The clinical trial process is also time consuming. We estimate that clinical trials of our product candidates will take at least several years to complete. Because of numerous risks and uncertainties involved in our business, the timing or amount of increased development expenses cannot be accurately predicted, and our expenses could increase beyond expectations if we are required by the FDA, or comparable non-U.S. regulatory authorities, to perform studies or clinical trials in addition to those we currently anticipate. We anticipate that further product development is also expected to increase expenses, including but not limited to the expected initiation of IND-enabling studies of IBIO-100 and IBIO-101 in fiscal 2022 and the additional studies that will be required to support development of IBIO-400 for which we recently submitted an Outline of Production and facility documentation to the U.S. Department of Agriculture. Furthermore, failure can occur at any stage of the trials, and we could encounter problems that cause us to abandon or repeat clinical trials.

In addition, as we expand our business, we will need to retain additional employees with the necessary skills including employees for our planned establishment of drug discovery capabilities in San Diego, California. In addition, to achieve our objectives we expect to add additional employees which is expected to significantly add to our fixed costs.  

25

Even if any of our product candidates are approved for commercial sale, we anticipate incurring significant costs associated with the commercial launch of and the related commercial-scale manufacturing requirements for our product candidates. As a result, we expect to continue to incur significant and increasing operating losses and negative cash flows for the foreseeable future. Because of the numerous risks and uncertainties associated with biopharmaceutical product development and commercialization, we are unable to accurately predict the timing or amount of future expenses or when, or if, we will be able to achieve or maintain profitability. These losses have had and will continue to have an adverse effect on our financial position and working capital.

We need additional funding to fully execute our business plan, which funding may not be available on commercially acceptable terms or at all. If we are unable to raise capital when needed, we may be forced to delay, reduce or eliminate the commercialization of our development and manufacturing services and efforts for our product development programs.

We will need additional capital to fully implement our current long-term business, operating and development plans. To the extent that we initiate or continue clinical development without securing collaborator or licensee funding, our research and development expenses could increase substantially.

When we elect to raise additional funds or additional funds are required, we may raise such funds from time to time through public or private equity offerings, debt financings, corporate collaboration and licensing arrangements or other financing alternatives. Additional equity or debt financing or corporate collaboration and licensing arrangements may not be available on acceptable terms, if at all. We currently have no committed sources of funding.  On November 25, 2020, we entered into a Controlled Equity Offering SM Sales Agreement (the “Sales Agreement”) with Cantor Fitzgerald & Co. ("Cantor Fitzgerald") to sell shares of common stock, from time to time, through an “at the market offering” program having an aggregate offering price of up to $100,000,000 through which Cantor Fitzgerald would act as sales agent (the “Sales Agent”). There can be no assurance that we will meet the requirements to be able to sell securities pursuant to the Sales Agreement, of if we meet the requirements that we will be able to raise sufficient funds on favorable terms. If we are unable to raise capital in sufficient amounts when needed or on attractive terms, we would be forced to delay, reduce or eliminate our research and development programs or commercialization efforts and our ability to generate revenues and achieve or sustain profitability will be substantially harmed.

Given that our total cash and investments in debt securities as of June 30, 2021 was approximately $97.0 million, we believe we have adequate cash to support our current operations. We plan to fund our future business operations using cash on hand, through proceeds realized in connection with the commercialization of our technologies and proprietary products (which is not anticipated to be generated, if ever, in the near future), license and collaboration arrangements and the operation of iBio CDMO, and through proceeds from the sale of additional equity or other securities. We cannot be certain that such funding will be available on favorable terms or available at all. To the extent that we raise additional funds by issuing equity securities, our stockholders may experience significant dilution.

We have based this projection on assumptions that may prove to be wrong, in which case we may deplete our cash resources sooner than we currently anticipate. Our future capital requirements will depend on many factors, including:

26

If we are unable to raise funds when required or on favorable terms, this assumption may no longer be operative, and we may have to: a) significantly delay, scale back, or discontinue the product application and/or commercialization of our proprietary technologies; b) seek collaborators for our technology and product candidates on terms that are less favorable than might otherwise be available; c) relinquish or otherwise dispose of rights to technologies, product candidates, or products that we would otherwise seek to develop or commercialize; or d) possibly cease operations.

We may not have an adequate number of shares of common stock authorized to enable us to complete future equity financing transactions or strategic transactions, which may adversely affect our ability to grow and develop.

We are authorized to issue 275,000,000 shares of common stock, of which approximately 217,873,094 shares of common stock were issued and outstanding as June 30, 2021. At June 30, 2021, 35.3 million common shares were reserved for issuance of shares upon exercise of outstanding options or reserved for future issuance of common shares under our equity incentive plans. If all of these securities were exercised it would leave 21.8 million authorized but unissued shares of common stock.

As a result of our limited number of our authorized and unissued shares of common stock, we may have insufficient shares of common stock available to issue in connection with any future equity financing transactions or strategic transactions we may seek to undertake. Accordingly, we will likely take steps in the near future to increase our number of available shares, which may include seeking stockholder approval of an increase in our authorized number of shares of common stock or a reverse stock split. At our annual meeting of stockholders held on December 9, 2020, we sought but did not obtain approval of an increase in our authorized number of shares of common stock from 275,000,000 to 425,000,000. There can be no assurance that we will be successful in seeking approval for such actions. If not, we may need to rely on debt for growth capital or take other steps necessary to raise capital or reduce operations.

Raising additional capital may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our technologies or product candidates.

Until such time as we can generate substantial development, manufacturing, license or product revenues, we expect to finance our cash needs through a combination of equity offerings, collaborations, strategic alliances, service contracts, manufacturing contracts, facility build-out and technology transfer contracts, licensing and other arrangements. Sources of funds may not be available or, if available, may not be available on terms satisfactory to us.

If we raise additional funds by issuing equity securities, our stockholders will experience dilution. Debt financing, if available, would result in increased fixed payment obligations and may involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, making capital expenditures or declaring dividends. Any debt financing or additional equity that we raise may contain terms, such as liquidation and other preferences, which are not favorable to us or our stockholders. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish valuable rights to our technologies, future revenue streams, research programs or product candidates or to grant licenses on terms that may not be favorable to us. Should the financing we require to sustain our working capital needs be unavailable or prohibitively expensive when we require it, our business, operating results, financial condition and prospects could be materially and adversely affected and we may be unable to continue our operations.

To the extent that we raise additional capital through a public or private offering and sale of equity securities, your ownership interest will be diluted, and the terms of these securities may include liquidation or other preferences that adversely affect your rights as a stockholder. We are authorized to issue 275,000,000 shares of common stock, of which at June 30, 2021, approximately 217,873,094 shares of common stock were issued and outstanding and 35,330,000 common shares were reserved for issuance of shares upon exercise of outstanding options or reserved for future issuance of common shares under our equity incentive plans. If all of these securities were exercised it would leave 21.8 million authorized but unissued shares of common stock. Accordingly, we will be able to issue up to approximately 21.8 million additional shares of common stock and 999,999 shares of preferred stock based on our current authorized number of shares

27

of common stock. Sales of our common stock offered through current or future equity offerings may result in substantial dilution to our stockholders. The sale of a substantial number of shares of our common stock to investors, or anticipation of such sales, could make it more difficult for us to sell equity or equity-related securities in the future at a time and at a price that we might otherwise wish to effect sales.

We have a limited operating history conducting commercial activities as a CDMO and developing vaccines and therapeutics, which may limit the ability of investors to make an informed investment decision.

We commenced independent operations in 2008, and our operations to date have included organizing and staffing our company, business planning, raising capital, acquiring and developing our proprietary technologies, recommissioning and operating our CDMO facility, identifying potential product candidates and undertaking, through third parties, preclinical trials and clinical trials of product candidates derived from our technologies. Commercial activities at our CDMO facility commenced in January 2016 with the large majority of our early efforts directed towards recommissioning the facility to help meet cGMP manufacturing standards and provisions for iBio’s core service offerings.  During the past year, we shifted our focus away from generating revenue as a CDMO service provider to the development of vaccines and therapeutics for commercialization.  The current vaccines and therapeutics being developed are all in preclinical development. Certain vaccine candidates using iBio’s technologies have previously been evaluated by other organizations in Phase 1 clinical trials; however, all of our vaccine and therapeutic protein product candidates are still in preclinical development. Neither we nor our collaborators have completed any other clinical trials for any vaccine or therapeutic protein product candidate produced using iBio technology. As a result, we have not yet demonstrated our ability to successfully complete any Phase 2 or pivotal clinical trials, obtain regulatory approvals, manufacture a commercial scale product, or arrange for a third party to do so on our behalf, or conduct sales and marketing activities necessary for successful product commercialization. Consequently, any conclusion you reach about our future success or viability may not be as predictive as it might be if we had a longer operating history.

Even if we receive regulatory approval for the sale of any of our product candidates, we do not know when we will begin to generate significant revenue from such product candidates, if at all. Our ability to generate revenue depends on a number of factors, including our ability to:

Because of the numerous risks and uncertainties associated with development and manufacturing, we are unable to predict if we will generate significant revenue. If we cannot successfully execute on any of the factors listed above, our business may not succeed, and we may never generate significant revenue.

28

Any government funding for our R&D programs may impose requirements that limit our ability to take certain actions, and subject us to potential financial penalties, which could materially and adversely affect our business, financial condition and results of operations.

We have applied for government grants to support some of our research and development activities for our product candidates. Often government grants include provisions that reflect the government’s substantial rights and remedies, many of which are not typically found in commercial contracts, including powers of the government to potentially require repayment of all or a portion of the grant award proceeds, in certain cases with interest, in the event we violate certain covenants pertaining to various matters.

Risks Related to the Development and Commercialization of Our Technologies and Product Candidates

We currently have only four product candidates in early stages of pre-clinical development and are dependent on the success of these product candidates, which requires significant clinical testing before seeking regulatory approval. If our product candidates do not receive regulatory approval or are not successfully commercialized, our business may be harmed.

We are currently in preclinical development of seven product candidates as potential treatments for fibrosis, oncology, COVID-19 and a veterinary vaccine for swine fever. It is possible that we may never be able to develop a marketable product candidate.

We expect that a substantial portion of our efforts and expenditures over the next few years will be devoted to these product candidates. Accordingly, our business currently depends heavily on the successful development, regulatory approval and commercialization of these product candidates, which may not receive regulatory approval or be successfully commercialized even if regulatory approval is received. The research, testing, manufacturing, labeling, approval, sale, marketing and distribution of product candidates are and will remain subject to extensive regulation by the FDA and other regulatory authorities in the United States and other countries that each have differing regulations. We are not permitted to market any product in the United States unless and until we receive approval from the FDA, or in any foreign countries unless and until we receive the requisite approval from regulatory authorities in such countries. We have never submitted an NDA or BLA to the FDA or comparable applications to other regulatory authorities and do not expect to be in a position to do so for the foreseeable future. Obtaining approval of an NDA or BLA is an extensive, lengthy, expensive, and inherently uncertain process, and the FDA may delay, limit or deny approval of its product for many reasons.

Because we have limited financial and managerial resources, our focus is limited to the development of our four product candidates. As a result, we may forego or delay pursuit of opportunities with other technologies or product candidates that later prove to have greater commercial potential. Our resource allocation decisions may cause us to fail to capitalize on viable commercial products or profitable market opportunities. Our spending and the spending of our clients and collaborators may not yield any commercially viable products.

We have based our research and development efforts largely on our technologies and product candidates derived from such technologies. Notwithstanding our large investment to date and anticipated future expenditures in these technologies, we have not yet developed, and may never successfully develop, any marketed products using these technologies. As a result, we may fail to address or develop product candidates based on other scientific approaches that may offer greater commercial potential or for which there is a greater likelihood of success.

We also may not be successful in our efforts to identify or discover additional product candidates using our technologies. Research programs to identify new product candidates require substantial technical, financial, and human resources. These research programs may initially show promise in identifying potential product candidates yet fail to yield product candidates for clinical development.

​

29

Our business, financial condition, and results of operations could be significantly impacted if the products we manufacture for our customers do not gain market acceptance.

If the products we manufacture for our customers do not gain market acceptance or production volumes of key products that we manufacture for our customers decline, our financial condition and results of operations may be adversely affected. We depend on, and have no control over, market acceptance for the products we manufacture for our customers. Consumer demand for our customers’ products could be adversely affected by, among other things, delays in securing regulatory approvals, the emergence of competing or alternative products, including generic drugs, the loss of patent and other intellectual property rights protection, reductions in private and government payment product subsidies or changing product marketing strategies.

We expect that continued changes to the healthcare industry, including ongoing healthcare reform, changes in government or private funding of healthcare products and services, legislation or regulations governing the delivery, pricing or reimbursement of pharmaceuticals and healthcare services or mandated benefits, could cause healthcare industry participants to purchase fewer services from us or influence the price that others are willing to pay for our services. Changes in the healthcare industry’s pricing, selling, inventory, distribution or supply policies or practices could also significantly reduce our revenue and profitability.

We may expend our limited resources to pursue a particular technology or product candidate and fail to capitalize on technologies or product candidates that may be more profitable or for which there is a greater likelihood of success.

Because we have limited financial and managerial resources, we focus on specific product candidates derived from or enhanced by our technologies or that have been identified and partially developed by our clients or collaborators. As a result, we may forego or delay pursuit of opportunities with other technologies or product candidates that later prove to have greater commercial potential. Our resource allocation decisions may cause us to fail to capitalize on viable commercial products or profitable market opportunities. Our spending and the spending of our clients and collaborators may not yield any commercially viable products.

We have based our research and development efforts largely on our technologies and product candidates derived from such technologies. Notwithstanding our large investment to date and anticipated future expenditures in these technologies, we have not yet developed, and may never successfully develop, any marketed products using these technologies. As a result, we may fail to address or develop product candidates based on other scientific approaches that may offer greater commercial potential or for which there is a greater likelihood of success.

We also may not be successful in our efforts to identify or discover additional product candidates using our technologies. Research programs to identify new product candidates require substantial technical, financial, and human resources. These research programs may initially show promise in identifying potential product candidates yet fail to yield product candidates for clinical development.

If we do not accurately evaluate the commercial potential or target market for a particular product candidate, we may relinquish valuable rights to that product candidate through collaboration, licensing or other royalty arrangements on terms less favorable to us than possible.

We, our clients and collaborators, are very early in our development efforts. If we or our clients and collaborators are unable to successfully develop and commercialize product candidates or experience significant delays in doing so, our business will be materially harmed.

Excepting a limited number of vaccine candidates that have been evaluated in completed Phase 1 clinical trials, all of our other vaccine and therapeutic protein product candidates are still in preclinical development. Our ability to generate product sales revenues for our own products, which we do not expect will occur for many years, will depend heavily on

30

the successful development and eventual commercialization of our product candidates. The success of our product candidates will depend on several factors, including the following:

If we or our collaborators do not achieve one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully develop and commercialize our product candidates, which would materially harm our business.

We may not be successful in our efforts to use iBio technologies to build a pipeline of product candidates and develop marketable products.

While we believe that data we and our collaborators have obtained from preclinical studies and Phase I clinical trials of iBio technology-derived and iBio technology-enhanced product candidates has validated these technologies, our technologies have not yet, and may never lead to, approvable or marketable products. Even if we are successful in further validating our technologies and continuing to build our pipeline, the potential product candidates that we identify may not be suitable for clinical development for many possible reasons, including harmful side effects, limited efficacy or other characteristics that indicate that such product candidates are unlikely to be products that will receive marketing approval and achieve market acceptance. If we and our collaborators do not successfully develop and commercialize product candidates based upon our technologies, we will not obtain product or collaboration revenues in future periods, which likely would result in significant harm to our financial position and adversely affect our stock price.

Neither we nor our clients, collaborators or licensees will be able to commercialize product candidates based on our technologies and services if preclinical studies do not produce successful results or clinical trials do not demonstrate safety and efficacy in humans.

Preclinical and clinical testing is expensive, difficult to design and implement, can take many years to complete and has an uncertain outcome. Success in preclinical testing and early clinical trials does not ensure that later clinical trials will be successful, and interim results of a clinical trial do not necessarily predict final results. We and our licensees may

31

experience numerous unforeseen events during, or as a result of, preclinical testing and the clinical trial process that could delay or prevent the commercialization of product candidates based on our iBio technologies, including the following:

Significant clinical trial delays could allow our competitors to bring products to market before we or our licensees do and impair our ability to commercialize our technologies and product candidates based on our technologies. Poor clinical trial results or delays may make it impossible to license a product candidate, or reduce its attractiveness to prospective licensees, so that we will be unable to successfully develop and commercialize such a product candidate.

Clinical trials are risky, lengthy, and expensive. We will incur substantial expense for, and devote significant time and resources to, preclinical testing and clinical trials, yet we cannot be certain that these tests and trials will demonstrate that a product candidate is effective and well-tolerated or will ever support its approval and commercial sale. For example, clinical trials require adequate supplies of clinical trial material and sufficient patient enrollment to power the trial. Delays in patient enrollment can result in increased costs and longer development times. Even if we, or a licensee or collaborator, if applicable, successfully complete clinical trials for our clinical product candidate, we or they might not file the required regulatory submissions in a timely manner and may not receive marketing approval for the clinical product candidate. We cannot assure you that our clinical product candidate will successfully progress further through the drug development process or will ultimately result in an approved and commercially viable product.

32

If we, or our clients and collaborators, are not able to obtain, or if there are delays in obtaining, required regulatory approvals, we, or our clients and collaborators, will not be able to develop or commercialize our, or third-party, product candidates or will not be able to do so as soon as anticipated, and our ability to generate revenue will be materially impaired.

Our product candidates and the activities associated with their development and commercialization, including their design, testing, manufacture, safety, efficacy, recordkeeping, labeling, storage, approval, advertising, promotion, sale and distribution, are subject to comprehensive regulation by the FDA and by similar regulatory authorities outside the United States. Failure to obtain marketing approval for a product candidate will prevent us from commercializing the product candidate. We have not received approval to market any of our product candidates from regulatory authorities in any jurisdiction. We have only limited experience in filing and supporting the applications necessary to gain marketing approvals and expect to rely on third parties to assist us in this process. Securing marketing approval requires the submission of extensive preclinical and clinical data and supporting information to regulatory authorities for each therapeutic indication to establish the product candidate’s safety and efficacy. Securing marketing approval also requires the submission of information about the product manufacturing process to, and inspection of manufacturing facilities by, the regulatory authorities. Our product candidates may not be effective, may be only moderately effective or may prove to have undesirable or unintended side effects, toxicities or other characteristics that may preclude our obtaining marketing approval or prevent or limit commercial use. If any of our product candidates receives marketing approval, the accompanying label may limit the approved use in such a restrictive manner that it is not possible to obtain commercial viability for such product.

The process of obtaining marketing approvals, both in the United States and abroad, is expensive and may take many years. If additional clinical trials are required for certain jurisdictions, these trials can vary substantially based upon a variety of factors, including the type, complexity and novelty of the product candidates involved, and may ultimately be unsuccessful. Changes in marketing approval policies during the development period, changes in or the enactment of additional statutes or regulations, or changes in regulatory review process for each submitted product application, may cause delays in the review and approval of an application. Regulatory authorities have substantial discretion in the approval process and may refuse to accept a marketing application as deficient or may decide that our data is insufficient for approval and require additional preclinical, clinical or other studies. In addition, varying interpretations of the data obtained from preclinical and clinical testing could delay, limit or prevent marketing approval of a product candidate. Any marketing approval we ultimately obtain may be limited or subject to restrictions or post-approval commitments that render the approved product not commercially viable.

Although the FDA and other regulatory authorities have approved plant-based therapeutics in the past, consistent with the oversight of all products, the FDA is monitoring whether these plant-based therapeutics pose any health and human safety risks. While they have not issued any regulation to date that is averse to plant-based vaccines or therapeutics, it is possible that the FDA and other regulatory authorities could issue regulations in the future that could adversely affect our product candidates.

If we experience delays in obtaining approval or if we fail to obtain approval of our product candidates, the commercial prospects for our product candidates may be harmed and our ability to generate revenues will be materially impaired.  

Any product candidate for which we obtain marketing approval, along with the manufacturing processes, post-approval clinical data, labeling, packaging, distribution, adverse event reporting, storage, recordkeeping, export, import, advertising and promotional activities for such product candidate, among other things, will be subject to extensive and ongoing requirements of and review by the FDA and other regulatory authorities. These requirements include submissions of safety, efficacy and other post-marketing information and reports, establishment registration and drug listing requirements, continued compliance with current Good Manufacturing Practice, or cGMP, requirements relating to manufacturing, quality control, quality assurance and corresponding maintenance of records and documents, requirements regarding the distribution of samples to physicians and recordkeeping and current GCP requirements for any clinical trials that we conduct post-approval. Even if marketing approval of a product candidate is granted, the approval may be subject to limitations on the indicated uses for which the product candidate may be marketed or to the conditions of approval. If our clinical product candidate receives marketing approval, the accompanying label may limit the approved use of our product, which could limit sales.

33

Alternative technologies may supersede our technologies or make them noncompetitive, which would harm our ability to generate future revenue.

The manufacture of biologics and the methods of such manufacture are intensely competitive fields. Each of these fields is characterized by extensive research efforts, which result in rapid technological progress that can render existing technologies obsolete or economically noncompetitive. If our competitors succeed in developing more effective technologies or render our technologies obsolete or noncompetitive, our business will suffer. Many universities, public agencies and established pharmaceutical, biotechnology, and other life sciences companies with substantially greater resources than we have are developing and using technologies and are actively engaging in the development of products similar to or competitive with our technologies and products. To remain competitive, we must continue to invest in new technologies and improve existing technologies. To make such renewing investment we will need to obtain additional financing. If we are unable to secure such financing, we will not have sufficient resources to continue such investment. In addition, they also have significantly greater experience in the discovery and development of products, as well as in obtaining regulatory approvals of those products in the United States and in foreign countries. Our current and potential future competitors also have significantly more experience commercializing drugs that have been approved for marketing. Mergers and acquisitions in the pharmaceutical and biotechnology industries could result in even more resources being concentrated among a small number of our competitors.

Our competitors may devise methods and processes for protein expression that are faster, more efficient or less costly than that which can be achieved using iBio technologies. There has been and continues to be substantial academic and commercial research effort devoted to the development of such methods and processes. If successful competitive methods are developed, it may undermine the commercial basis for iBio products and our technologies and related services.

For our cancer product candidates, not only do we compete with companies engaged in various cancer treatments including radiotherapy and chemotherapy, but we also compete with various companies that have developed or are trying to develop immunology vaccines for the treatment of cancer. Certain of our competitors have substantially greater capital resources, large customer bases, broader product lines, sales forces, greater marketing and management resources, larger research and development staffs with extensive facilities and equipment than we do and have more established reputations as well as global distribution channels. Our most significant competitors, among others, are fully integrated pharmaceutical companies such as Eli Lilly and Company, Bristol-Myers Squibb Company, Merck & Co., Inc., Novartis AG, MedImmune, LLC (a wholly owned subsidiary of AstraZeneca plc), Johnson & Johnson, Pfizer Inc., MerckKGaA and Sanofi SA, and more established biotechnology companies such as Genentech, Inc. (a member of the Roche Group), Amgen Inc., Gilead Sciences, Inc. and its subsidiary Kite Pharma, Inc., and competing cancer immunotherapy companies such as, Bluebird Bio, Inc., Transgene SA, Bausch Health Companies, NewLink Genetics Corporation, Agenus Inc., Aduro Biotech, Inc., Advaxis, Inc., ImmunoCellular Therapeutics, Ltd., IMV Inc., Oxford BioMedica plc, Bavarian Nordic A/S, Celldex Therapeutics, Inc.,

We have recently announced preclinical testing of a new vaccine program for treatment of certain patients with COVID-19. This SARS-CoV2 disease is extremely challenging and there are many companies addressing COVID-19, both in vaccines and therapeutic treatments, many of which have significantly greater resources and capital than we do and are further along in the clinic than we are. Pfizer-BioNTech, Moderna, and Johnson & Johnson have already developed a COVID-19 vaccine approved for emergency use in the United States and elsewhere, and many more, including several that have progressed further than us, including Oxford-AstraZeneca, Sanofi, Inovio, Takara Bio and Novavax, are in various stages of development, some of which have already received approval for emergency use in some European countries. Various government entities, including the U.S. government, are offering incentives, grants and contracts to encourage additional investment by commercial organizations into preventative and therapeutic agents against coronavirus, which may have the effect of increasing the number of competitors and/or providing advantages to known competitors. The competition for funding research and development in this disease, including grant funding, is intense and there can be no assurance that we will be able to obtain adequate funding to carry out our development plan or that, even if funding is obtained, our vaccine will be effective, timely, and accepted by appropriate regulatory authorities. Accordingly, there can be no assurance that we will be able to successfully establish a competitive market share for our COVID-19 vaccine, if any.

34

We will face competition from other drugs currently approved or that will be approved in the future for the treatment of the diseases we are currently targeting. Therefore, our ability to compete successfully will depend largely on our ability to:

The availability of our competitors’ products could limit the demand, and the price we are able to charge, for any product candidate we develop. The inability to compete with existing or subsequently introduced therapies would have an adverse impact on our business, financial condition and prospects.

Established pharmaceutical companies may invest heavily to accelerate discovery and development of novel compounds or to in-license novel compounds that could make our product candidate less competitive. In addition, any new products that competes with an approved product must demonstrate compelling advantages in efficacy, convenience, tolerability and safety in order to overcome price competition and to be commercially successful. Accordingly, our competitors may succeed in obtaining patent protection, discovering, developing, receiving the FDA’s approval for or commercializing medicines before we do, which would have an adverse impact on our business and results of operations.

Our clinical product candidate may exhibit undesirable side effects when used alone or in combination with other approved pharmaceutical products, which may delay or preclude its development or regulatory approval, or limit its use if ever approved.

Throughout the drug development process, we must continually demonstrate the activity, safety, and tolerability of our clinical product candidate in order to obtain regulatory approval to further advance our clinical development, or to eventually market it. Even if our clinical product candidate demonstrates adequate biologic activity and clear clinical benefit, any unacceptable side effects or adverse events, when administered alone or in the presence of other pharmaceutical products, may outweigh these potential benefits. We may observe adverse or serious adverse events or drug-drug interactions in preclinical studies or clinical trials of our clinical product candidate, which could result in the delay or termination of its development, prevent regulatory approval, or limit its market acceptance if it is ultimately approved.

Adverse events caused by our clinical product candidates or generally by plant-based therapeutics could cause reviewing entities, clinical trial sites or regulatory authorities to interrupt, delay or halt clinical trials and could result in the denial of regulatory approval. If an unacceptable frequency or severity of adverse events are reported in our clinical trials for our clinical product candidates, our ability to obtain regulatory approval for such clinical product candidate may be negatively impacted. In addition, adverse events caused by any clinical product candidate administered in combination with our product candidates could cause similar interruptions and delays, even though not caused by our clinical product candidates.

35

Furthermore, if any of our products are approved and then cause serious or unexpected side effects, a number of potentially significant negative consequences could result, including:

Any of these events could prevent us from achieving or maintaining market acceptance of the affected clinical product candidate and could substantially increase the costs of commercialization.

Our failure to receive or maintain regulatory approval for product candidates developed at our facility could negatively impact our revenue and profitability.

Our contract manufacturing business materially depends upon the regulatory approval of the products we manufacture. As such, if we experience a delay in, or failure to provide, approval for any product candidates we are manufacturing or if we or our customers fail to maintain regulatory approval of their products, our revenue and profitability could be adversely affected. Additionally, if the FDA or a comparable foreign regulatory authority does not approve of our facilities for the manufacture of a customer product or if it withdraws such approval in the future, our customers may choose to identify alternative manufacturing facilities and/or relationships, which could significantly impact our ability to expand our CDMO capacity and capabilities and achieve profitability.

Product liability lawsuits against us could cause us to incur substantial liabilities and to limit commercialization of any products that we may develop.

We face the risk of product liability exposure in connection with the testing of our product candidates in human clinical trials and will face an even greater risk if we commercially sell any products that we may develop. If we cannot successfully defend ourselves against claims that our product candidates or products caused injuries, we will incur substantial liabilities. Regardless of merit or eventual outcome, liability claims may result in:

36

Prior to commencing human clinical trials, we will seek to obtain product liability insurance coverage. Such insurance coverage is expensive and may not be available in coverage amounts we seek or at all. If we obtain such coverage, we may in the future be unable to maintain such coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise.

For our clinical product candidates, we intend to use our own manufacturing facility. Any manufacturing problems experienced by us could result in a delay or interruption in the supply of our clinical product candidate until the problem is cured or until we locate and qualify an alternative source of manufacturing and supply.

We currently manufacture our clinical product candidates and do not have a second alternative manufacturer. If we were to experience any prolonged disruption for our manufacturing, we could be forced to seek additional third-party manufacturing contracts, thereby increasing our development costs and negatively impacting our timelines and any commercialization costs. If we change manufacturers at any point during the development process or after approval of a product candidate, we will be required to demonstrate comparability between the product manufactured by the old manufacturer and the product manufactured by the new manufacturer. If we are unable to do so we may need to conduct additional clinical trials with product manufactured by the new manufacturer.

If we are not able to manufacture sufficient quantities of our clinical product candidate, our development activities would be impaired. In addition, the manufacturing facility where our clinical product candidate is manufactured is subject to ongoing, periodic inspection by the FDA or other comparable regulatory agencies to ensure compliance with current Good Manufacturing Practice, or cGMP. Any failure to follow and document the manufacturer’s adherence to such cGMP regulations or other regulatory requirements may lead to significant delays in the availability of clinical bulk drug substance and finished product for clinical trials, which may result in the termination of or a hold on a clinical trial, or may delay or prevent filing or approval of marketing applications for our clinical product candidate. We also may encounter problems with the following:

37

If we encounter any of these problems or are otherwise delayed, or if the cost of manufacturing is not economically feasible or we cannot find another third-party manufacturer, we may not be able to produce our clinical product candidate in a sufficient quantity to meet future demand.

These risks are likely to be exacerbated by our limited experience with our current products and manufacturing processes. If demand for our products materializes, we may have to invest additional resources to purchase materials, hire and train employees, and enhance our manufacturing processes. It may not be possible for us to manufacture our clinical product candidate at a cost or in quantities sufficient to make its clinical product candidate commercially viable. Any of these factors may affect our ability to manufacture our products and could reduce gross margins and profitability.

Reliance on third-party manufacturers and suppliers entails risks to which we would not be subject if we manufacture our clinical product candidate ourselves, including:

If we rely on a third party contract manufacturer or its suppliers fail to deliver the required commercial quantities of our clinical product candidate required for our clinical trials and, if approved, for commercial sale, on a timely basis and at commercially reasonable prices, and we are unable to find one or more replacement manufacturers or suppliers capable of production at a substantially equivalent cost, in substantially equivalent volumes and quality, and on a timely basis, we would likely be unable to meet demand for our products and would have to delay or terminate our pre-clinical or clinical trials, and we would lose potential revenue. It may also take significant time to establish an alternative source of supply for our clinical product candidate and to have any such new source approved by the FDA or any applicable foreign regulatory authorities. Furthermore, any of the above factors could cause the delay or suspension of initiation or completion of clinical trials, regulatory submissions or required approvals of our clinical product candidate, cause it to incur higher costs and could prevent us from commercializing our clinical product candidate successfully.

Risks Related to Dependence on Third Parties

If we are unable to establish new collaborations and maintain both new and existing collaborations, or if these collaborations are not successful, our business could be adversely affected.

Our current business plan contemplates that we will in the future derive significant revenues from collaborators and licensees that successfully utilize iBio technologies in connection with the production, development and commercialization of vaccines and therapeutic protein product candidates. Our realization of these revenues and dependence on existing collaborations, and any future collaborations we enter into, is subject to a number of risks, including the following:

38

If our collaborations do not result in the successful development and commercialization of products or if one or more of our collaborators terminates its agreement with us, we may not receive any future research and development funding or milestone or royalty payments under the collaboration. If we do not receive the funding we expect under these agreements, our continued development of our product candidates could be delayed and we may need additional resources to develop additional product candidates. There can be no assurance that our collaborations will produce positive results or successful products on a timely basis or at all.

We seek to establish and collaborate with additional pharmaceutical and biotechnology companies for development and potential commercialization of iBio technology-produced and iBio technology-enhanced product candidates. We face significant competition in seeking appropriate collaborators. Our ability to reach a definitive agreement for a collaboration depends, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration and the proposed collaborator’s evaluation of several factors. If we fail to reach agreements with suitable collaborators on a timely basis, on acceptable terms, or at all, we may have to curtail the development of a product candidate, reduce or delay its development or the development of one or more of our other product candidates, or increase our expenditures and undertake additional development or commercialization activities at our own expense. If we

39

elect to fund and undertake development or commercialization activities on our own, we may need to obtain additional expertise and additional capital, which may not be available to us on acceptable terms or at all.

If we fail to enter into collaborations and do not have sufficient funds or expertise to undertake the necessary development and commercialization activities, we may not be able to further develop our product candidates or bring them to market or continue to develop our product portfolio and our business may be materially and adversely affected.

If third parties on whom we or our licensees will rely for the conduct of preclinical studies and clinical trials do not perform as contractually required or as we expect, we may not be able to obtain regulatory approval for or commercialize our product candidates and our business may suffer.

We have limited resources dedicated to designing, conducting, and managing our preclinical studies and clinical trials. We do not have the ability to independently conduct the preclinical studies and clinical trials required to obtain regulatory approval for our product candidates. We have not yet contracted with any third parties to conduct clinical trials of product candidates we develop independently of collaborators. We will depend on licensees or on independent clinical investigators, contract research organizations and other third-party service providers to conduct the clinical trials of our product candidates. We will rely on these vendors and individuals to perform many facets of the clinical development process on our behalf, including conducting preclinical studies and will rely on them for the recruitment of sites and subjects for participation in our clinical trials, maintenance of good relations with the clinical sites, and ensuring that these sites are conducting our trials in compliance with the trial protocol and applicable regulations.

We will rely heavily on these parties for successful execution of our clinical trials but will not control many aspects of their activities. For example, the investigators participating in our clinical trials will not be our employees. However, we will be responsible for ensuring that each of our clinical trials is conducted in accordance with the general investigational plan and protocols for the trial. Third parties may not complete activities on schedule, or may not conduct our clinical trials in accordance with regulatory requirements or our stated protocols. The failure of these third parties to carry out their obligations could delay or prevent the development, approval and commercialization of our product candidates. If these third parties fail to perform satisfactorily, or do not adequately fulfill their obligations under the terms of our agreements with them, we may not be able to enter into alternative arrangements without undue delay or additional expenditures, and therefore the preclinical studies and clinical trials of our clinical product candidate may be delayed or prove unsuccessful.

Further, the FDA, the EMA, or similar regulatory authorities in other countries, may inspect some of the clinical sites participating in our clinical trials or our third-party vendors’ sites to determine if our clinical trials are being conducted according to good clinical practices, or GCPs, or similar regulations. If we or a regulatory authority determine that our third-party vendors are not in compliance with, or have not conducted our clinical trials according to applicable regulations, we may be forced to exclude certain data from the results of the trial, or delay, repeat or terminate such clinical trials.

If revenue from a third-party customer or client is concentrated in an amount that makes up a significant percentage of our total revenues, we may be adversely impacted by the significant dependence upon that client, including but not limited to, receipt and collections of outstanding amounts, significant percentage use iBio’s capacity, the opportunity cost of more profitable opportunities using our capacity, of continued operational allocations toward the client and related efficiencies.

To date, our revenue has been derived from a small number of clients upon which our revenue has been dependent. At this time, we are continually promoting our technologies and CDMO capabilities to further expand and grow our revenue base and business. We will continue to consider any potential revenue and client related concentration risks. Although we expect our revenues to increase significantly and further vary by client over the next twelve months, there are no guarantees we will be correct in our assumptions.  If we continue to derive our revenue from a small number of clients, we will remain dependent upon these clients for our revenue generation and the ability of the clients to use our services.

40

We rely on third parties to supply most of the necessary raw materials and supplies for the products we manufacture on behalf of our customers and our inability to obtain such raw materials or supplies may adversely impact our business, financial condition, and results of operations.

Our operations require various raw materials, including proprietary resins, buffers, and filters, in addition to numerous additional raw materials supplied primarily by third parties. We or our customers specify the raw materials and other items required to manufacture their product and, in some cases, specify the suppliers from whom we must purchase these raw materials. In certain instances, the raw materials and other items can only be supplied by a limited number of suppliers and, in some cases, a single source, or in limited quantities. If third-party suppliers do not supply raw materials or other items on a timely basis, it may cause a manufacturing run to be delayed or canceled which would adversely impact our financial condition and results of operations.  If we experience difficulties acquiring sufficient quantities of required materials or products from our existing suppliers, or if our suppliers are found to be non-compliant with the FDA’s quality system regulation, cGMP or other applicable laws or regulations, we would be required to find alternative suppliers. If our primary suppliers become unable or unwilling to perform, any resulting delays or interruptions in the supply of raw materials required to support our manufacturing of cGMP pharmaceutical-grade products would ultimately delay our manufacture of products for our customers, which could materially and adversely affect our financial condition and operating results.

Furthermore, third-party suppliers may fail to provide us with raw materials and other items that meet the qualifications and specifications required by us or our customers. If third-party suppliers are not able to provide us with raw materials that meet our or our customers’ specifications on a timely basis, we may be unable to manufacture their product or it could prevent us from delivering products to our customers within required timeframes. Any such delay in delivering our products may create liability for us to our customers for breach of contract or cause us to experience order cancellations and loss of customers. In the event that we manufacture products with inferior quality components and raw materials, we may become subject to product liability claims caused by defective raw materials or components from a third-party supplier or from a customer, or our customer may be required to recall its products from the market.

Any claims beyond our insurance coverage limits, or that are otherwise not covered by our insurance, may result in substantial costs and a reduction in our available capital resources.

We maintain property insurance, employer’s liability insurance, product liability insurance, general liability insurance, business interruption insurance, and directors’ and officers’ liability insurance, among others. Although we maintain what we believe to be adequate insurance coverage, potential claims may exceed the amount of insurance coverage or may be excluded under the terms of the policy, which could cause an adverse effect on our business, financial condition and results from operations. Generally, we would be at risk for the loss of inventory that is not within customer specifications. These amounts could be significant. In addition, in the future we may not be able to obtain adequate insurance coverage or we may be required to pay higher premiums and accept higher deductibles in order to secure adequate insurance coverage.

We may be subject to various litigation claims and legal proceedings.

We, as well as certain of our directors and officers, may be subject to claims or lawsuits during the ordinary course of business. Regardless of the outcome, these lawsuits may result in significant legal fees and expenses and could divert management’s time and other resources. If the claims contained in these lawsuits are successfully asserted against us, we could be liable for damages and be required to alter or cease certain of our business practices. Any of these outcomes could cause our business, financial performance and cash position to be negatively impacted.

41

Risks Related to Intellectual Property

If we or our licensors are unable to obtain and maintain patent protection for our technology and products, or if the scope of the patent protection obtained is not sufficiently broad, competitors could develop and commercialize technology and products similar or identical to ours, and our ability to successfully commercialize our technology and products may be impaired.

Our success depends in part on our ability to obtain and maintain patent and other intellectual property protection in the United States and other countries with respect to our proprietary technology and products. We seek to protect our proprietary position by filing patent applications in the United States and abroad related to our novel technologies and product candidates, and by maintenance of our trade secrets through proper procedures.

The patent prosecution process is expensive and time-consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost, in a timely manner, or in all jurisdictions. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection.

The patent position of biotechnology and pharmaceutical companies generally is highly uncertain, involves complex legal and factual questions and has in recent years been the subject of much litigation. In addition, the laws of foreign countries may not protect our rights to the same extent as the laws of the United States and we may fail to seek or obtain patent protection in all major markets. For example, European patent law restricts the patentability of methods of treatment of the human body more than United States law does. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the United States and other jurisdictions are typically not published until 00 months after filing, or in some cases not at all. Therefore, we cannot know with certainty whether we were the first to make the inventions claimed in our owned patents or pending patent applications, or that we were the first to file for patent protection of such inventions, nor can we know whether those from whom we license patents were the first to make the inventions claimed or were the first to file. As a result, the issuance, scope, validity, enforceability and commercial value of our patent rights are highly uncertain. Our pending and future patent applications may not result in patents being issued which protect our technology or products, in whole or in part, or which effectively prevent others from commercializing competitive technologies and products. Changes in either the patent laws or interpretation of the patent laws in the United States and other countries may diminish the value of our patents or narrow the scope of our patent protection.

Moreover, we may be subject to a third-party pre-issuance submission of prior art to the U.S. PTO, or become involved in opposition, derivation, reexamination, inter partes review, post-grant review or interference proceedings challenging our patent rights or the patent rights of others. An adverse determination in any such submission, proceeding or litigation could reduce the scope of, or invalidate, our patent rights, allow third parties to commercialize our technology or products and compete directly with us, without payment to us, or result in our inability to manufacture or commercialize products without infringing third-party patent rights. In addition, if the breadth or strength of protection provided by our patents and patent applications is threatened, it could dissuade companies from collaborating with us to license, develop or commercialize current or future product candidates.

Even if our pending or future patent applications issue as patents, they may not issue in a form that will provide us with any meaningful protection, prevent competitors from competing with us or otherwise provide us with any competitive advantage. Our competitors may be able to circumvent our patents by developing similar or alternative technologies or products in a non-infringing manner.

The issuance of a patent is not conclusive as to its inventorship, scope, validity or enforceability, and our patents may be challenged in the courts or patent offices in the United States and abroad. Such challenges may result in loss of exclusivity or freedom to operate or in patent claims being narrowed, invalidated or held unenforceable, in whole or in part, which could limit our ability to stop others from using or commercializing similar or identical technology and products, or limit the duration of the patent protection of our technology and products. Given the amount of time required for the development, testing and regulatory review of new product candidates, patents protecting such candidates might expire before or shortly after such candidates are commercialized. As a result, our patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours.

42

We may become involved in lawsuits to protect or enforce our patents or other intellectual property, which could be expensive, time-consuming and ultimately unsuccessful.

Our commercial success depends upon our ability, and the ability of our collaborators, to develop, manufacture, market and sell our product candidates and use our proprietary technologies without infringing the proprietary rights of third parties. There is considerable intellectual property litigation in the biotechnology and pharmaceutical industries. Competitors may infringe our issued patents or other intellectual property. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time-consuming. Any claims we assert against perceived infringers could provoke these parties to assert counterclaims against us alleging that we infringe their intellectual property. In addition, in a patent infringement proceeding, a court may decide that a patent of ours is invalid or unenforceable, in whole or in part, construe the patent’s claims narrowly or refuse to stop the other party from using the technology at issue on the grounds that our patents do not cover the technology in question. An adverse result in any litigation proceeding could put one or more of our patents at risk of being invalidated or interpreted narrowly, which could adversely affect us and our collaborators.

While no such litigation has been brought against us and we have not been held by any court to have infringed a third party’s intellectual property rights, we cannot guarantee that our technology, products or use of our products do not infringe third-party patents. It is also possible that we have failed to identify relevant third-party patents or applications. For example, applications filed before November 29, 2000, and certain applications filed after that date that will not be filed outside the United States remain confidential until patents issue. Patent applications in the United States and elsewhere are published approximately 18 months after the earliest filing date, which is referred to as the priority date. Therefore, patent applications covering our products or technology could have been filed by others without our knowledge. Additionally, pending patent applications which have been published can, subject to certain limitations, be later amended in a manner that could cover our technologies, our products or the use of our products.

We may become party to, or threatened with, future adversarial proceedings or litigation regarding intellectual property rights with respect to our products and technology, including interference or derivation proceedings before the U.S. PTO and similar bodies in other countries. Third parties may assert infringement claims against us based on existing intellectual property rights and intellectual property rights that may be granted in the future.

If we are found to infringe a third party’s intellectual property rights, we could be required to obtain a license from such third party to continue developing and marketing our products and technology. However, we may not be able to obtain any required license on commercially reasonable terms or at all. Even if we were able to obtain a license, it could be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. We could be forced, including by court order, to cease commercializing the infringing technology or product. In addition, we could be found liable for monetary damages, including treble damages and attorneys’ fees if we are found to have willfully infringed a patent. A finding of infringement could prevent us from commercializing our product candidates or force us to cease some of our business operations, which could materially harm our business. Claims that we have misappropriated the confidential information or trade secrets of third parties could have a similar negative impact on our business.

In addition, the uncertainties associated with litigation could have a material adverse effect on our ability to raise the funds necessary to continue our clinical trials, continue our research programs, license necessary technology from third parties, or enter into development partnerships that would help us bring our product candidates to market. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation.

43

If we are found to have failed to comply with our obligations in the agreements under which we license intellectual property rights from third parties or otherwise experience disruptions to our business relationships with our licensors, we could lose intellectual property rights that are important to our business.

We are a party to an exclusive license agreement with University of Pittsburgh, as well as a non-exclusive license agreement with the University of Natural Resources and Life Sciences, Vienna, and an exclusive license agreement with RubrYc and a collaboration, option and license agreement with RubrYc  and may need to obtain additional licenses from others to advance our research and development activities or allow the commercialization of our lead products or other product candidates that we may identify. Our license agreements impose, and we expect that future license agreements will impose, various development, diligence, commercialization, and other obligations on us. Our prospects for our fibrosis product candidate (IBIO-100), which is now one of our primary focuses, is significantly dependent upon our license agreement with the University of Pittsburgh. The license grants us exclusive, worldwide rights to certain existing patents and related intellectual property that cover fibrosis. If we breach the terms of the license, including any failure to make minimum royalty payments required thereunder or failure to reach certain developmental milestones and by certain deadlines or other factors, University of Pittsburgh has the right to terminate the license. Under the terms and conditions of the license agreement, as amended, we have agreed to use our best efforts to bring the licensed technology to market as soon as practicable, consistent with sound and reasonable business practice and judgment, and to continue active, diligent marketing efforts for the licensed technology throughout the term of this Agreement. In addition, this license agreement, as amended sets forth the following specific milestone completion deadlines: filing an investigational new drug application by December 31, 2021, enrollment of first patient in a Phase 1 clinical trial by March 31, 2022, enrollment of first patient in a Phase 2 clinical trial by June 30, 2023, enrollment of first patient in a Phase 3 clinical trial by June 30, 2026 and filing of a Biologics License Application or foreign equivalent by December 21, 2029. Although we intend to commence initiation of IND-enabling studies in fiscal 2022, there can be no assurance that we will complete the necessary studies in order to allow for us to file an IND by December 31, 2021.  If we were to lose or otherwise be unable to maintain the license on acceptable terms or find that it is necessary or appropriate to secure new licenses from other third parties, we may not be able to further develop or market IBIO-100.

The commercial license with RubrYc exclusively permits us to research, develop, make, have made, manufacture, use, distribute, sell, offer for sale, import, and export antibodies in RubrYc’s RTX-003. Under the terms and conditions of the RTX-003 License Agreement, we agreed to use commercially reasonable efforts to develop and commercialize RTX-003 antibodies. If we fail to achieve certain timing milestones for starting GMP manufacturing and dosing human patients under an IND, we could be required to make a payment to RubrYc on the date the milestone is missed and on each anniversary of such date until the milestone is achieved, provided that the milestone was missed due to our failure to exercise commercially reasonable efforts. If we breach the terms of the license agreement with RubrYc, RubrYc has the right to terminate the license agreement. In addition, the collaboration, option and license agreement with RubrYc provides that in the event the option is exercised by us, we have various diligence obligations including that we will use commercially reasonable efforts to (i) develop Selected Compounds for use in pharmaceutical products (the “Collaboration Products”); and (ii) commercialize the Collaboration Products. In addition, we are also required to meet a series of development milestones for each Collaboration Product. Failure to achieve the milestones will result in a payment to RubrYc on the date the milestone is missed and on each anniversary of such date until the milestone is achieved, provided that the milestone was missed due to our failure to exercise commercially reasonable efforts.  If we breach the terms of the collaboration, option and license agreement with RubrYc, they have the right to terminate the license agreement.

44

​

In spite of our efforts, our licensors might allege that we have materially breached our obligations under such license agreements and might therefore attempt to terminate the license agreements, thereby removing or limiting our ability to develop and commercialize products and technology covered by these license agreements. If these in-licenses are terminated, or if the underlying patents fail to provide the intended exclusivity, competitors or other third parties might have the freedom to seek regulatory approval of, and to market, products identical to ours and we may be required to cease our development and commercialization of our lead products or other product candidates that we may identify. Any of the foregoing could have a material adverse effect on our competitive position, business, financial conditions, results of operations, and prospects.

Moreover, disputes may arise regarding intellectual property subject to a licensing agreement, including:

• the scope of rights granted under the license agreement and other interpretation-related issues;

• the extent to which our product candidates, technology and processes infringe on intellectual property of the licensor that is not subject to the licensing agreement;

• the sublicensing of patent and other rights under our collaborative development relationships;

• our diligence obligations under the license agreement and what activities satisfy those diligence obligations;

• the inventorship and ownership of inventions and know-how resulting from the joint creation or use of intellectual property by our licensors and us and our partners; and

• the priority of invention of patented technology.

In addition, the agreements under which we currently license intellectual property or technology from third parties are complex, and certain provisions in such agreements may be susceptible to multiple interpretations. The resolution of any contract interpretation disagreement that may arise could narrow what we believe to be the scope of our rights to the relevant intellectual property or technology or increase what we believe to be our financial or other obligations under the relevant agreement, either of which could have a material adverse effect on our business, financial condition, results of operations, and prospects. Moreover, if disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on commercially acceptable terms, we may be unable to successfully develop and commercialize the affected product candidates, which could have a material adverse effect on our business, financial conditions, results of operations, and prospects.

Patent terms may be inadequate to protect our competitive position on our product candidates for an adequate amount of time.

Patents have a limited lifespan. In the United States, if all maintenance fees are timely paid, the natural expiration of a patent is generally 20 years from its earliest U.S. non-provisional filing date. Various extensions may be available, but the life of a patent, and the protection it affords, is limited. Even if patents covering our product candidates are obtained, once the patent life has expired, we may be open to competition from competitive products, including generics or biosimilars. Given the amount of time required for the development, testing and regulatory review of new product candidates, patents protecting such candidates might expire before or shortly after such candidates are commercialized. As a result, our owned and licensed patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours.

45

If we are unable to protect our trade secrets, our business and competitive position would be harmed.

In addition to seeking patents for some of our technology and product candidates, we also rely on trade secrets, including unpatented know-how, technology and other proprietary information, to maintain our competitive position. We seek to protect these trade secrets, in part, by entering into non-disclosure and confidentiality agreements with parties who have access to them, such as our employees, corporate collaborators, outside scientific collaborators, contract manufacturers, consultants, advisors and other third parties. We also seek to enter into confidentiality and invention or patent assignment agreements with our employees and consultants. Despite these efforts, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Our trade secrets may also be obtained by third parties by other means, such as breaches of our physical or computer security systems. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive and time-consuming, and the outcome is unpredictable. In addition, some courts inside and outside the United States are less willing or unwilling to protect trade secrets. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor, we would have no right to prevent them, or those to whom they communicate it, from using that technology or information to compete with us. If any of our trade secrets were to be disclosed to or independently developed by a competitor, our competitive position would be harmed.

We may be subject to claims challenging the inventorship of our patent filings and other intellectual property.

Many of our employees, including our senior management, were previously employed at other biotechnology or pharmaceutical companies. These employees typically executed proprietary rights, non-disclosure and non-competition agreements in connection with their previous employers. Although we try to ensure that our employees do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we or these employees have used or disclosed intellectual property, including trade secrets or other proprietary information, of any such employee’s former employer. We or our licensors may be subject to claims that former employees, collaborators or other third parties have an interest in our owned or in-licensed patents, trade secrets, or other intellectual property as an inventor or co-inventor. For example, we or our licensors may have inventorship disputes arise from conflicting obligations of employees, consultants or others who are involved in developing our product candidates. Litigation may be necessary to defend against these and other claims challenging inventorship or our or our licensors’ ownership of our owned or in-licensed patents, trade secrets or other intellectual property. If we or our licensors fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, intellectual property that is important to our product candidates. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operations and prospects. In addition, while we require our employees and contractors who may be involved in the conception or development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who, in fact, conceives or develops intellectual property that we regard as our own. The assignment of intellectual property rights may not be self-executing, or the assignment agreements may be breached, and we may be forced to bring claims against third parties, or defend claims that they may bring against us, to determine the ownership of what we regard as our intellectual property.

Intellectual property rights do not necessarily address all potential threats to our competitive advantage.

The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations and may not adequately protect our business or permit us to maintain our competitive advantage. The following examples are illustrative:

46

Should any of these events occur, they could significantly harm our business, results of operations and prospects.

We may not be able to protect our intellectual property rights throughout the world.

Filing, prosecuting and defending patents on our product candidates in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries outside the United States can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States. Consequently, we may not be able to prevent third parties from practicing our inventions in all countries outside the United States, or from selling or importing products made using our inventions in and into the United States or other jurisdictions. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and may also export infringing products to territories where we have patent protection, but enforcement is not as strong as that in the United States. These products may compete with our products and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing. Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets, and other intellectual property protection, particularly those relating to biotechnology products, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license.

If we should fail to comply with various patent laws our patent protection could be reduced or eliminated.

​

Periodic maintenance fees, renewal fees, annuity fees and various other governmental fees on patents and/or applications will be due to be paid to the USPTO and various governmental patent agencies outside of the United States in several stages over the lifetime of the patents and/or applications. We have systems in place to remind us to pay these fees, and we employ an outside firm and rely on our outside counsel to pay these fees due to non-U.S. patent agencies. The USPTO

47

and various non-U.S. governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. We employ reputable law firms and other professionals to help us comply, and in many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which non-compliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors might be able to enter the market and this circumstance would have a material adverse effect on our business.

Changes in patent law, including recent patent reform legislation, could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents.

Changes in either the patent laws or interpretation of the patent laws in the United States could increase the uncertainties and costs surrounding the prosecution of patent applications and the enforcement or defense of issued patents. Assuming that other requirements for patentability are met, prior to March 2013, in the United States, the first to invent the claimed invention was entitled to the patent, while outside the United States, the first to file a patent application was entitled to the patent. After March 2013, under the Leahy-Smith America Invents Act, or the America Invents Act, enacted in September 2011, the United States transitioned to a first inventor to file system in which, assuming that other requirements for patentability are met, the first inventor to file a patent application will be entitled to the patent on an invention regardless of whether a third party was the first to invent the claimed invention. A third party that files a patent application in the USPTO after March 2013, but before us could therefore be awarded a patent covering an invention of ours even if we had made the invention before it was made by such third party. This will require us to be cognizant of the time from invention to filing of a patent application. Since patent applications in the United States and most other countries are confidential for a period of time after filing or until issuance, we cannot be certain that we or our licensors were the first to either (i) file any patent application related to our product candidates or (ii) invent any of the inventions claimed in our or our licensor’s patents or patent applications. In addition, the patent positions of companies in the development and commercialization of pharmaceuticals are particularly uncertain. Recent U.S. Supreme Court rulings have narrowed the scope of patent protection available in certain circumstances and weakened the rights of patent owners in certain situations. This combination of events has created uncertainty with respect to the validity and enforceability of patents, once obtained. Depending on future actions by the U.S. Congress, the federal courts, and the USPTO, the laws and regulations governing patents could change in unpredictable ways that could have a material adverse effect on our existing patent portfolio and our ability to protect and enforce our intellectual property in the future.

Risks Related to iBio’s Operations

Our operating results will be adversely affected if we are unable to maximize our facility capacity utilization.

iBio CDMO’s operating results are significantly influenced by our capacity utilization and, as such, if we are unable to utilize our facilities to capacity, our margins could be adversely affected, and our results of operations and financial condition will continue to be adversely affected. Further, while we continue to implement and execute our business plan and attract and maintain customers for our development, manufacturing and technology transfer services, our revenue volume may be insufficient to ensure the economical operation of our facilities, in which case our results of operations could be adversely affected.

For our clinical product candidate and our CDMO business, we intend to use our own manufacturing facility. Any manufacturing problems experienced by us could result in a delay or interruption in the supply of our clinical product candidate until the problem is cured or until we locate and qualify an alternative source of manufacturing and supply.

We rely on the continuous operation of our only manufacturing facility in Texas for the production of our products. We currently manufacture our clinical product candidates and perform services for our CDMO customers at our facility located in Texas and do not have a second alternative manufacturer. Any natural disaster or other serious disruption to our facility due to fire, flood, earthquake, or any other unforeseen circumstance would adversely affect our business, financial condition, and results of operations. In addition, adverse weather conditions, such as increased frequency and/or severity of storms, or floods could impair our ability to operate by damaging our facilities and equipment or restricting product delivery to customers. The occurrence of any disruption at our manufacturing facility, even for a short period of time, may

48

have an adverse effect on our productivity and profitability, during and after the period of the disruption. If we were to experience any prolonged disruption for our manufacturing, we could be forced to seek additional third-party manufacturing contracts, thereby increasing our development costs and negatively impacting our timelines and any commercialization costs. If we change manufacturers at any point during the development process or after approval of a product candidate, we will be required to demonstrate comparability between the product manufactured by the old manufacturer and the product manufactured by the new manufacturer. If we are unable to do so we may need to conduct additional clinical trials with product manufactured by the new manufacturer.

A failure by iBio to hire and retain an appropriately skilled and adequate workforce could adversely impact the ability of the facility to operate and function efficiently.

iBio’s operations will depend, in part, on their ability to attract and retain an appropriately skilled and sufficient workforce to operate its development and manufacturing facility as well as its R&D facility. These employees may voluntarily terminate their employment with us at any time. Both facilities are located in a growing biotechnology hubs and competition for skilled workers will continue to increase as the industry undergoes further growth in the area. There can be no assurance that we will be able to retain key personnel, or to attract and retain additional qualified employees. Our inability to attract and retain key personnel as we grow in two locations may have a material adverse effect on our business.

If we are unable to provide quality and timely services to our customers, our business could suffer.

The manufacturing services we conduct are highly complex, due in part to strict regulatory requirements. A failure of our quality control systems in our facilities could cause problems to arise in connection with facility operations for a variety of reasons, including equipment malfunction, viral contamination, failure to follow specific manufacturing instructions, protocols and standard operating procedures, problems with raw materials or environmental factors. Such problems could affect production of a single manufacturing run or a series of runs, requiring the destruction of products, or could halt manufacturing operations altogether. In addition, our failure to meet required quality standards may result in our failure to timely deliver products to our customers, which in turn could damage our reputation for quality and service. Any such incident could, among other things, lead to increased costs, lost revenue, reimbursement to customers for lost drug substance, damage to and possibly termination of existing customer relationships, time and expense spent investigating the cause and, depending on the cause, similar losses with respect to other manufacturing runs. With respect to our commercial manufacturing, if problems are not discovered before the product is released to the market, we may be subject to regulatory actions, including product recalls, product seizures, injunctions to halt manufacture and distribution, restrictions on our operations, civil sanctions, including monetary sanctions, and criminal actions. In addition, such issues could subject us to litigation, the cost of which could be significant.

Failure to comply with regulatory requirements could adversely affect our business and results of operations.

Our CDMO operations are highly regulated, and we must comply with the regulatory requirements of various local, state, provincial, national and international regulatory bodies having jurisdiction in the countries or localities in which we manufacture products or in which our customers’ products are distributed. In particular, we are subject to laws and regulations concerning development, testing, manufacturing processes, equipment and facilities, including compliance with cGMPs, import and export, and product registration and listing, among other things. As a result, our facility is subject to regulation by the FDA, as well as regulatory bodies of other jurisdictions where our customers have marketing approval for their products. As we expand our operations and geographic scope, we may be exposed to more complex and newer regulatory and administrative requirements and legal risks, any of which may require expertise in which we have little or no experience. It is possible that compliance with new regulatory requirements could impose significant compliance costs on us. Such costs could have a material adverse effect on our business, financial condition and results of operations.

iBio CDMO’s operations are also subject to a variety of environmental, health and safety laws and regulations, including those of the Environmental Protection Agency and equivalent local and state agencies. These laws and regulations govern, among other things, air emissions, wastewater discharges, the use, handling and disposal of hazardous substances and wastes, soil and groundwater contamination and employee health and safety. Any failure to comply with environmental, health and safety requirements could result in the limitation or suspension of production or monetary fines or civil or

49

criminal sanctions, or other future liabilities. iBio CDMO is also subject to laws and regulations governing the destruction and disposal of raw materials and the handling and disposal of regulated material.

Not only will our customers’ products be subject to the regulatory approvals discussed above that our proprietary products will be subject to, but our facility is subject to governmental approval for the testing or manufacturing of products If our manufacturing facility is not able to demonstrate compliance with cGMPs, pass other aspects of pre-approval inspections or properly scale up to produce commercial supplies, the FDA or other regulatory agencies can delay approval of a customers’ drug candidate.

In addition, if new legislation or regulations are enacted or existing legislation or regulations are amended or are interpreted or enforced differently, we may be required to obtain additional approvals or operate according to different manufacturing or operating standards. This may require a change in our development and manufacturing techniques or additional capital investments in our facility. Any related costs may be significant. If we fail to comply with applicable regulatory requirements in the future, then we may be subject to warning letters and/or civil or criminal penalties and fines, suspension or withdrawal of regulatory approvals, product recalls, seizure of products, restrictions on the import and export of our products, debarment, exclusion, disgorgement of profits, operating restrictions and criminal prosecution and the loss of contracts and resulting revenue losses. Inspections by regulatory authorities that identify any deficiencies could result in remedial actions, production stoppages or facility closure, which would disrupt the manufacturing process and supply of product to our customers. In addition, such failure to comply could expose us to contractual and product liability claims, including claims by customers for reimbursement for lost or damaged active pharmaceutical ingredients or recall or other corrective actions, the cost of which could be significant.

The FDA and comparable government authorities having jurisdiction in the countries in which we or our customers intend to market their products have the authority to withdraw product approval or suspend manufacture if there are significant problems with raw materials or supplies, quality control and assurance or the product we manufacture is adulterated or misbranded. If our manufacturing facilities and services are not in compliance with the FDA and comparable government authorities, we may be unable to obtain or maintain the necessary approvals to continue manufacturing products for our customers, which would materially adversely affect our financial condition and results of operations.

We may be unable to manage our future growth effectively, which could make it difficult to execute our business strategy.

We intend to grow our business operations as demand increases and increase the number of our employees to accommodate such potential growth, which may cause us to experience periods of rapid growth and expansion. This potential future growth could create a strain on our organizational, administrative and operational infrastructure, including manufacturing operations, quality control, technical support and other administrative functions. Our ability to manage our growth properly will require us to continue to improve our operational, financial and management controls.

As our commercial operations and sales volume grow, we will need to continue to increase our capacity for manufacturing, customer service, billing and general process improvements and expand our internal quality assurance program, among other things. We may also need to purchase additional equipment, some of which can take several months or more to procure, set up and validate, and increase our manufacturing, maintenance, software and computing capacity to meet increased demand. These increases in scale, expansion of personnel, purchase of equipment or process enhancements may not be successfully implemented.

If we are unable to protect the confidentiality of our customers’ proprietary information, we may be subject to claims.

Many of the formulations used and processes developed by us in manufacturing our customers’ products are subject to trade secret protection, patents or other intellectual property protections owned or licensed by such customer. While we make significant efforts to protect our customers’ proprietary and confidential information, including requiring our employees to enter into agreements protecting such information, if any of our employees breaches the non-disclosure provisions in such agreements, or if our customers make claims that their proprietary information has been disclosed, our reputation may suffer damage and we may become subject to legal proceedings that could require us to incur significant expenses and divert our management’s time, attention and resources.

50

If we acquire companies, products or technologies, we may face integration risks and costs associated with those acquisitions that could negatively impact our business, results from operations and financial condition.

If we are presented with appropriate opportunities, we may acquire or make investments in complementary companies, products or technologies. We may not realize the anticipated benefit of any acquisition or investment. If we acquire companies or technologies, we will face risks, uncertainties and disruptions associated with the integration process, including difficulties in the integration of the operations of an acquired company, integration of acquired technology with our products, diversion of our management’s attention from other business concerns, the potential loss of key employees or customers of the acquired business, and impairment charges if future acquisitions are not as successful as we originally anticipate. In addition, our operating results may suffer because of acquisition-related costs or amortization expenses or charges relating to acquired intangible assets. Any failure to successfully integrate other companies, products, or technologies that we may acquire may have a material adverse effect on our business and results of operations. Furthermore, we may have to incur debt or issue equity securities to pay for any additional future acquisitions or investments, the issuance of which could be dilutive to our existing stockholders.

We rely on third parties to supply the raw materials needed to operate our CDMO business and our research and development activities and do not have any long-term commitments from such suppliers.

​

We currently rely on third parties for the raw materials needed to operate our CDMO business and our research and development activities. We do not have any long-term commitments from any raw material suppliers and therefore cannot guarantee that there will be adequate supply of our raw materials. Natural disasters or other disruptions at any of our suppliers’ facilities may impair or delay the delivery of our products. Influenza or other pandemics, such as the new coronavirus, could disrupt production of our products, reduce demand for certain of our products, or disrupt the marketplace in the foodservice or retail environment with consequent material adverse effects on our results of operations. To the extent we are unable to, or cannot, financially mitigate the likelihood or potential impact of such events, or effectively manage such events if they occur, particularly when a product is sourced from a single location, there could be a material adverse effect on our business and results of operations, and additional resources could be required to restore our supply chain. Although we believe we have sufficient supply of our other raw materials at this time, due to supply chain shortages, we may not be able to obtain such materials in the future is our current suppliers should be unable to satisfy our needs. Such suppliers may not be able to provide us with engines in a timely manner due to supply chain shortages and even if other suppliers are able to fulfill our needs they may not be able to do so at the same price as we currently pay for such materials, which could result in lower profit margins or us increasing the price of our services in order to maintain profit margins which could adversely impact demand for our services.

​

Risks Relating to Our Common Stock

iBio is subject to compliance under the NYSE American continued listing standards of the NYSE American Company Guide, the failure of which can result in delisting from the NYSE American.

In order to maintain its listing with NYSE American, we must remain in compliance with the continued listing standards as set forth in the NYSE American Company Guide (the “Company Guide”), including the listing standard set forth in Section 1003 of the Guide, which applies if a listed company has stockholders’ equity below certain threshold amounts and has sustained losses from continuing operations and/or net losses in its five most recent fiscal years. In the past, we have received notification of noncompliance with the continued listing requirements, which to date have been remediated

There can be no assurance that we will continue to meet all of the Exchange’s continued listing standards, or exemptions therefrom, in the future.

51

Provisions in our certificate of incorporation, bylaws and under Delaware law could discourage a takeover that stockholders may consider favorable.

Provisions of our certificate of incorporation, bylaws and provisions of applicable Delaware law may discourage, delay or prevent a merger or other change in control that a stockholder may consider favorable. Pursuant to our certificate of incorporation, our Board of Directors may issue additional shares of common stock or preferred stock. Any additional issuance of common stock could have the effect of impeding or discouraging the acquisition of control of us by means of a merger, tender offer, proxy contest or otherwise, including a transaction in which our stockholders would receive a premium over the market price for their shares, and thereby protect the continuity of our management. Specifically, if in the due exercise of its fiduciary obligations, the Board of Directors were to determine that a takeover proposal was not in our best interest, shares could be issued by our Board of Directors without stockholder approval in one or more transactions that might prevent or render more difficult or costly the completion of the takeover by:

Our certificate of incorporation also allows our Board of Directors to fix the number of directors in the by-laws. Our certificate of incorporation does not contemplate cumulative voting in the election of directors and thus, under Delaware law, cumulative voting in the election of directors is not permitted. Our Board of Directors is divided into three classes, each of which serves for a staggered term of three years. This division of our Board of Directors could have the effect of impeding an attempt to take over our company or change or remove management, since only one class will be elected annually. Thus, only approximately one-third of the existing Board of Directors could be replaced at any election of directors.

The effect of these provisions may be to delay or prevent a tender offer or takeover attempt that a stockholder may determine to be in his, her or its best interest, including attempts that might result in a premium over the market price for the shares held by the stockholders.

We do not anticipate paying cash dividends for the foreseeable future, and therefore investors should not buy our stock if they wish to receive cash dividends.

We have never declared or paid any cash dividends or distributions on our capital stock. We currently intend to retain our future earnings to support operations and to finance expansion and therefore we do not anticipate paying any cash dividends on our common stock in the foreseeable future.

The issuance of preferred stock could adversely affect the rights of the holders of shares of our common stock.

Our Board of Directors is authorized to issue up to 1,000,000 shares of preferred stock without any further action on the part of our stockholders. Our Board of Directors has the authority to fix and determine the voting rights, rights of redemption and other rights and preferences of preferred stock. Currently, we have one share of preferred stock outstanding. Our Board of Directors may, at any time, designate a new series of preferred stock that would grant to holders the preferred right to our assets upon liquidation, the right to receive dividend payments before dividends are distributed to the holders of common stock, and the right to the redemption of the shares, together with a premium, before the redemption of our common stock and authorize the issuance of such series of preferred stock, which may have a material adverse effect on the rights of the holders of our common stock. In addition, our Board of Directors, without further stockholder approval, may, at any time, issue large blocks of preferred stock. In addition, the ability of our Board of Directors to designate and issue shares of preferred stock without any further action on the part of our stockholders may impede a takeover of our company and may prevent a transaction that is favorable to our stockholders.

52

We rely extensively on our information technology systems and are vulnerable to damage and interruption

We rely on our information technology systems and infrastructure to process transactions, summarize results and manage our business, including maintaining client and supplier information. Additionally, we utilize third parties, including cloud providers, to store, transfer and process data. Our information technology systems, as well as the systems of our suppliers and other partners, whose systems we do not control, are vulnerable to outages and an increasing risk of continually evolving deliberate intrusions to gain access to company sensitive information. Likewise, data security incidents and breaches by employees and others with or without permitted access to our systems pose a risk that sensitive data may be exposed to unauthorized persons or to the public. A cyber-attack or other significant disruption involving our information technology systems, or those of our vendors, suppliers and other partners, could also result in disruptions in critical systems, corruption or loss of data and theft of data, funds or intellectual property.  A security breach of any kind, including physical or electronic break-ins, computer viruses and attacks by hackers, employees or others, could expose us to risks of data loss, litigation, government enforcement actions, regulatory penalties and costly response measures, and could seriously disrupt our operations. We may be unable to prevent outages or security breaches in our systems.  We remain potentially vulnerable to additional known or yet unknown threats as, in some instances, we, our suppliers and our other partners may be unaware of an incident or its magnitude and effects.  We also face the risk that we expose our vendors or partners to cybersecurity attacks.  Any or all of the foregoing could harm our reputation and adversely affect our results of operations and our business reputation.

The market price of our common stock has been and may continue to be volatile and adversely affected by various factors.

Our stock price has fluctuated in the past, has recently been volatile and may be volatile in the future. By way of example, on December 31, 2020, the price of our common stock closed at $1.05 per share while on February 9, 2021, our stock price closed at $2.62 per share with no discernable announcements or developments by us or third parties. On February 3, 2021, the intra-day sales price of our common stock fluctuated between a reported low sale price of $1.78 and a reported high sales price of $2.24. We may incur rapid and substantial decreases in our stock price in the foreseeable future that are unrelated to our operating performance or prospects. In addition, the recent outbreak of the novel strain of coronavirus (COVID-19) has caused broad stock market and industry fluctuations. The stock market in general and the market for biotechnology and pharmaceutical companies in particular have experienced extreme volatility that has often been unrelated to the operating performance of particular companies. As a result of this volatility, investors may experience losses on their investment in our common stock. The market price of our common stock could fluctuate significantly in response to various factors and events, including:

●investor reaction to our business strategy;

●the success of competitive products or technologies;

●our continued compliance with the listing standards of the NYSE American;

●results of our preclinical and clinical trials;

●variations in our financial results or those of companies that are perceived to be similar to us;

●our ability or inability to raise additional capital and the terms on which we raise it;

●declines in the market prices of stocks generally;

53

●trading volume of our common stock;

●sales of our common stock by us or our stockholders;

●general economic, industry and market conditions; and

These broad market and industry factors may seriously harm the market price of our common stock, regardless of our operating performance. Since the stock price of our common stock has fluctuated in the past, has been recently volatile and may be volatile in the future, investors in our common stock could incur substantial losses. In the past, following periods of volatility in the market, securities class-action litigation has often been instituted against companies. Such litigation, if instituted against us, could result in substantial costs and diversion of management’s attention and resources, which could materially and adversely affect our business, financial condition, results of operations and growth prospects. There can be no guarantee that our stock price will remain at current prices or that future sales of our common stock will not be at prices lower than those sold to investors.

Reports published by securities or industry analysts, including projections in those reports that exceed our actual results, could adversely affect our common stock price and trading volume.

Securities research analysts, including those affiliated with our underwriters from prior offerings, establish and publish their own periodic projections for our business. These projections may vary widely from one another and may not accurately predict the results we actually achieve. Our stock price may decline if our actual results do not match securities research analysts’ projections. Similarly, if one or more of the analysts who writes reports on us downgrades our stock or publishes inaccurate or unfavorable research about our business or if one or more of these analysts ceases coverage of our company or fails to publish reports on us regularly, our stock price or trading volume could decline. While we expect securities research analyst coverage to continue going forward, if no securities or industry analysts begin to cover us, the trading price for our stock and the trading volume could be adversely affected.

We are a “smaller reporting company”, and the reduced disclosure requirements applicable to smaller reporting companies may make our common stock less attractive to investors.

We are a "smaller reporting company" as defined in Rule 12b-2 promulgated under the Exchange Act. We may remain a smaller reporting company until we have a non-affiliate public float in excess of $250 million and annual revenues in excess of $100 million, or a non-affiliate public float in excess of $700 million, each as determined on an annual basis. For so long as we remain smaller reporting company, we are permitted and may take advantage of specified reduced reporting and other burdens that are otherwise applicable generally to public companies. These provisions include:

54

We cannot predict whether investors will find our common stock less attractive if we rely on such exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and the market price of our common stock may be more volatile.

If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results or prevent fraud. As a result, security holders could lose confidence in our financial and other public reporting, which would harm our business and the trading price of our common stock.

Effective internal control over financial reporting is necessary for us to provide reliable financial reports and, together with adequate disclosure controls and procedures, is designed to prevent fraud. Any failure to implement required new or improved controls, or difficulties encountered in their implementation could cause us to fail to meet our reporting obligations. In addition, any testing by us, as and when required, conducted in connection with Section 404 of the Sarbanes-Oxley Act, or Section 404, or any subsequent testing by our independent registered public accounting firm, as and when required, may reveal deficiencies in our internal control over financial reporting that are deemed to be material weaknesses or that may require prospective or retroactive changes to our financial statements or identify other areas for further attention or improvement. During the fiscal year 2020 fourth quarter, we identified material weaknesses in our internal control over financial reporting.  Although we have remedied the identified material weaknesses, there can be no assurance that we will not in the future encounter additional material weaknesses in internal control, especially in light of our small internal accounting staff and overall growth.  As a growing company, implementing and maintaining effective controls may require more resources, and we may encounter internal control integration difficulties. Inferior internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our common stock.

Pursuant to Section 404, we will be required to furnish a report by our management on our internal control over financial reporting. However, as a smaller reporting company, we will not be required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm until we are no longer a smaller reporting company. To achieve compliance with Section 404 within the prescribed period, we are engaged in a process to document and evaluate our internal control over financial reporting, which is both costly and challenging. In this regard, we will need to continue to dedicate internal resources, potentially engage outside consultants and adopt a detailed work plan to assess and document the adequacy of internal control over financial reporting, continue steps to improve control processes as appropriate, validate through testing that controls are functioning as documented and implement a continuous reporting and improvement process for internal control over financial reporting. Despite our efforts, there is a risk that we will not be able to conclude within the prescribed timeframe that our internal control over financial reporting is effective as required by Section 404. This could result in an adverse reaction in the financial markets due to a loss of confidence in the reliability of our financial statements.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Property.

As discussed above, iBio CDMO’s primary operations take place in Bryan, Texas, in a facility controlled iBio CDMO leases from the Second Eastern Affiliate as sublandlord. The facility is a 130,000-square foot Class A life sciences building located on land owned by the Texas A&M system, designed and equipped for plant-made development and manufacture of biopharmaceuticals. iBio CDMO has a 34-year sublease for the facility that terminates in 2050 which may be extended by iBio CDMO for a ten-year period, so long as iBio CDMO is not in default under the lease.

Under the Sublease, iBio CDMO is required to pay base rent at an annual rate of $2,100,000, paid in equal quarterly installments on the first day of each February, May, August and November. The base rent is subject to increase annually in accordance with increases in the Consumer Price Index (“CPI”). The base rent under the Second Eastern Affiliate’s ground lease for the property is subject to adjustment, based on an appraisal of the property, in 2030 and upon any extension

55

of the ground lease. The base rent under the Sublease will be increased by any increase in the base rent under the ground lease as a result of such adjustments. iBio CDMO is also responsible for all costs and expenses in connection with the ownership, management, operation, replacement, maintenance and repair of the property under the Sublease.

In addition to the base rent, iBio CDMO is required to pay, for each calendar year during the term, a portion of the total gross sales for products manufactured or processed at the facility, equal to 7% of the first $5,000,000 of gross sales, 6% of gross sales between $5,000,001 and $25,000,000, 5% of gross sales between $25,000,001 and $50,000,000, 4% of gross sales between $50,000,001 and $100,000,000, and 3% of gross sales between $100,000,001 and $500,000,000. However, if for any calendar year period from January 1, 2018 through December 31, 2019, iBio CDMO’s applicable gross sales are less than $5,000,000, or for any calendar year period from and after January 1, 2020, its applicable gross sales are less than $10,000,000, then iBio CDMO is required to pay the amount that would have been payable if it had achieved such minimum gross sales and shall pay no less than the applicable percentage for the minimum gross sales for each subsequent calendar year.

On September 11, 2021 iBio entered into a lease with SAN DIEGO INSPIRE 4, LLC for approximately11,383 square feet of lab and office space at 11750 Sorrento Valley Road in San Diego, CA. The lease will commence upon completion of the build out of the facility estimated to be in January 2022. The lease is for seven years and four months. The lease is triple net with Base Rent starting at $4.50 per month per square foot escalating approximately 3.0 percent per year during the lease term. iBio will use the facility primarily for R&D associated with its biologic product portfolio.

Item 3. Legal Proceedings.

Lawsuits

On May 4, 2021, iBio, Inc. (the “Company”) and Fraunhofer USA, Inc. (“FhUSA”) entered into a Confidential Settlement Agreement and Mutual Release (the “Settlement Agreement”) to settle all claims and counterclaims in the litigation captioned iBio, Inc. v. Fraunhofer USA, Inc. (Case No. 10256-VCF) in Delaware Chancery Court (the “Lawsuit”). The Settlement Agreement, among other things, resolved the Company’s claims to ownership of certain plant-based technology developed by FhUSA from 2003 through 2014, and set forth the terms of a license of intellectual property. The Lawsuit was commenced against FhUSA by the Company in March 2015 in the Court of Chancery of the State of Delaware and is described in more detail in the Company’s Quarterly Report on Form 10-Q for the quarter ended December 31, 2020. The Settlement Agreement is not an admission of liability or fault of the parties.

The terms of the Settlement Agreement provided for cash payments to the Company of $28,000,000 as follows: (i) $16,000,000 which was paid no later than May 14, 2021 (which was paid 100% to cover legal fees and expenses); (ii) two payments of $5,100,000 payable by March 31, 2022 and 2023 and (iii) as additional consideration for a license agreement, two payments of $900,000 due on March 1, 2022 and 2023. The license provides for a nonexclusive, nontransferable, worldwide, fully paid-up license to all intellectual property rights in and to certain plant-based technology developed by FhUSA from 2003 through 2014 that were the subject of the Lawsuit. After payment of the fees and expenses of its attorneys and others retained by the Company, including the litigation funding company, the Company’s estimated aggregate net cash recovery as a result of the Settlement Agreement will be approximately $10,200,000.  The Company will recognize the $1.8 million of license revenue when it determines collection of the license fees are reasonably assured.

The Settlement Agreement provided that within three business days of confirmation of receipt in full of the initial $16,000,000 payment, the Company and FhUSA will submit a stipulated order dismissing all claims with prejudice asserted in the Lawsuit. That stipulated order was entered by the Delaware Chancery Court in May 2021. The Settlement Agreement also contained a mutual release by the Company and FhUSA of all claims and counterclaims through the date of the Settlement Agreement.

​

Item 4. Mine Safety Disclosures.

Not applicable.

​

56

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Our common stock is traded on the NYSE American under the trading symbol “IBIO.”

Holders

As of September 8, 2021, there were 52 holders of record of our common stock.

Dividends

We have never declared or paid any cash dividends on our common stock. Dividends on our common stock cannot be declared or paid or set aside for payment or other distribution unless all accrued dividends on all outstanding shares of Preferred Tracking Stock are paid in full.

The Preferred Tracking Stock accrues dividends at the rate of 2% per annum on the original issue price. Accrued dividends are cumulative and are payable if and when declared by the Board of Directors, upon an exchange of the shares of Preferred Tracking Stock and upon our liquidation, winding up or deemed liquidation (such as a merger) of the Company. As of June 30, 2021, no dividends have been declared. Accrued dividends total approximately $1,131,000 at June 30, 2021.

Recent Sales of Unregistered Securities

There were no sales of unregistered securities other than as set forth in documents previously filed by the Company with the SEC.

Item 6. Selected Financial Data.

The information under this Item is not required to be provided by smaller reporting companies.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion of our financial condition and results of operations should be read together with our financial statements and the notes thereto and other information included elsewhere in this Annual Report on Form 10-K.

Overview

We are a developer of next-generation biopharmaceuticals and pioneer of the sustainable FastPharming Manufacturing System. The Company applies its licensed and owned technologies to develop novel products to treat or prevent fibrotic diseases, cancers, and infectious diseases. We use our FastPharming Manufacturing System (“FastPharming” or the “FastPharming System”) and Glycaneering Services ^TM to more rapidly build a portfolio of high quality biologic drug candidates in human clinical trials. We are also using the FastPharming System to create proteins for others by contract or via the Company’s catalog.

57

We operate in two segments: (i) Biopharmaceuticals: which includes development and licensing in two business units; Therapeutics (focused on oncology, as well as fibrotic and infectious diseases) and Vaccines (human and animal health vaccines), and (ii) Bioprocessing which includes Services (FastPharming Process Development and Manufacturing, as well as Bioanalytical and other services) and Products (growth factors, lectins, and monoclonal antibodies) for research and further manufacturing uses, collectively known as our Research & Bioprocess products (“RBP”).

Results of Operations

Revenue

Gross revenue for 2021 and 2020 was approximately $2.4 million and $1.6 million respectively, an increase of 50% The increase is primarily attributable to the timing of the completion of deliverables for individual customers. We do not have recurring contracts, so revenue can be highly variable year to year.  In 2021, the Company entered into a Master Manufacturing Services and Supply Agreement (“MSA”) with Lung Bio to produce recombinant human collagen-based bioinks for 3D-bioprinted organ transplants. Revenue earned from the MSA totaled $0.9 million. This MSA is in the process of being terminated. Additionally in 2021, Revenue earned from four other third-party customers totaled $1.5 million. In 2020, we entered into a strategic relationship with CC-Pharming earning $1.3 million in revenue in 2020 with an additional $.3 million generated from other customers.

Significant quarter-to-quarter revenue variability is commonplace for early-stage pharma services companies, given the relatively small number of contracts and timing of revenue recognition. Based upon the current outlook, iBio expects a sequential decline in revenue during the first half of fiscal 2022 compared to the second half of fiscal 2021, followed by higher growth in the second half of fiscal 2022. Irrespective of quarterly fluctuations, continued year-on-year revenue growth is anticipated.

Research and Development Expenses

Research and development expenses for 2021 and 2020 were approximately $10.0 million and $3.6 million, respectively, an increase of $6.4 million. The increase primarily related to the ramp up of activities related to our internal pipeline including an increase in research and development personnel and consulting costs of approximately $2.6 million, an increase in lab consumables of $2.8 million, and other various expense increases. While iBio expects R&D will continue to grow in fiscal 2022, it anticipates a slower growth rate compared to fiscal 2021.

General and Administrative Expenses

General and administrative expenses for 2021 and 2020 were approximately $22.0 million and $11.4 million respectively, an increase of $10.6 million. General and administrative expenses principally include officer and employee salaries and benefits, depreciation and amortization, professional fees, facility repairs and maintenance, rent, utilities, consulting services, operational costs and other costs associated with being a publicly traded company. The increase is primarily attributable to additional personnel costs of $2.7 million, facility repair and maintenance of $2.3 million, consulting fees of $2.0 million, legal fees of $1.6 million, and recruiting expense of $1.3 million. While iBio expect SG&A will continue to grow in fiscal 2022, it anticipates a slower growth rate compared to fiscal 2021.

Other Income (Expense)

Other income (expense) for 2021 and 2020 was $7.9 million and ($2.4) million, an increase of $10.3 million. The increase is primarily attributable to Settlement Income of $10.2 million related to the Fraunhofer IP settlement.

​

Net Loss Attributable to Noncontrolling Interest

This represents the share of the loss in iBio CDMO for the Eastern Affiliate in 2021 and 2020.

58

Liquidity and Capital Resources

As of June 30, 2021, we had cash of $77.4 million as compared to $55.1 million as of June 30, 2020. Given that our total cash and investment in debt securities as of June 30, 2021, approximated $97.0 million, we believe that our current cash will be sufficient to support our current operations through the first quarter of calendar year 2023.

The following equity transactions occurred during Fiscal 2021:

Net Cash Used in Operating Activities

In Fiscal 2021, net cash used in operating activities was $30.1 million, compared to net cash used in operating activities of $13.3 million in Fiscal 2020.  The increase in cash used in operating activities in 2021 as compared to 2020 was attributable to increased expenditures to support our business strategy.

​

Net Cash Used in Investing Activities

In Fiscal 2021, net cash used in investing activities was $26.5 million, which primarily consisted of the purchase of debt securities and the purchase of fixed assets offset by redemptions of debt securities.  In Fiscal 2020, our net cash used in investing activities was $1.1 million, which primarily consisted of the purchase of fixed assets.

​

Net Cash Provided by Financing Activities

In Fiscal 2021, net cash provided by financing activities was $78.8 million, compared to net cash provided by financing activities of $65.2 million in Fiscal 2020.  Net cash generated by financing activities in 2021 and 2021 was primarily the result of the issuance of common stock.

59

Funding Requirements

We have incurred significant losses and negative cash flows from operations since our spin-off from Integrated BioPharma in August 2008. As of June 30, 2021, our accumulated deficit was approximately $173.6 million, and we used approximately $30.1 million of net cash for operating activities for Fiscal 2021.

We plan to fund our future business operations using cash on hand, through proceeds realized in connection with the commercialization of our technologies and proprietary products, license and collaboration arrangements and the operation of iBio CDMO, through the collection or proceeds from our settlement with Fraunhofer, through potential proceeds from the sale or out-licensing of assets, and through proceeds from the sale of additional equity or other securities. We cannot be certain that such funding will be available on favorable terms or available at all. To the extent that the Company raises additional funds by issuing equity securities, its stockholders may experience significant dilution. If we are unable to raise funds when required or on favorable terms, this assumption may no longer be operative, and we may have to: a) significantly delay, scale back, or discontinue the product application and/or commercialization of our proprietary technologies; b) seek collaborators for our technology and product candidates on terms that are less favorable than might otherwise be available; c) relinquish or otherwise dispose of rights to technologies, product candidates, or products that we would otherwise seek to develop or commercialize; or d) possibly cease operations.

Off-Balance Sheet Arrangements

As part of our ongoing business, we do not participate in transactions that generate relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities (SPEs), which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually limited purposes. As of June 30, 2021, we were not involved in any SPE transactions.

Critical Accounting Policies and Estimates

A critical accounting policy is one that is both important to the portrayal of a company’s financial condition and results of operations and requires management’s most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain.

Our consolidated financial statements are presented in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”). All applicable U.S. GAAP accounting standards effective as of June 30, 2021 have been taken into consideration in preparing the consolidated financial statements. The preparation of consolidated financial statements requires estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosures. Some of those estimates are subjective and complex, and, consequently, actual results could differ from those estimates. The following accounting policies and estimates have been highlighted as significant because changes to certain judgments and assumptions inherent in these policies could affect our consolidated financial statements:

We base our estimates, to the extent possible, on historical experience. Historical information is modified as appropriate based on current business factors and various assumptions that we believe are necessary to form a basis for making judgments about the carrying value of assets and liabilities. We evaluate our estimates on an ongoing basis and make

60

changes when necessary. Actual results could differ from our estimates. See Note 3 to the consolidated financial statements in this Annual Report for a complete discussion of our significant accounting policies and estimates.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

The information under this Item is not required to be provided by smaller reporting companies.

Item 8. Financial Statements and Supplementary Data.

Financial statements and notes thereto appear on pages F-1 to F-44 of this Annual Report on Form 10-K.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

None.

Item 9A. Controls and Procedures.

(a)Evaluation of Disclosure Controls and Procedures

Our management, under the direction of our Chief Executive Officer and Chief Financial Officer have evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, as amended, as of June 30, 2021. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure. The Company’s disclosure controls and procedures are also designed to ensure that such information is accumulated and communicated to management to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

Based on our evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures were effective as of June 30, 2021.

Management’s Report on Internal Control over Financial Reporting

It is the responsibility of the management of iBio to establish and maintain effective internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act). Internal control over financial reporting is designed to provide reasonable assurance to iBio’s management and board of directors regarding the preparation of reliable financial statements for external purposes in accordance with generally accepted accounting principles.

iBio’s internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of iBio; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of iBio are being made only in accordance with authorizations of management and directors of iBio; and (iii) provide reasonable assurance regarding the prevention or timely detection of unauthorized acquisition, use or disposition of iBio’s assets that could have a material effect on the financial statements of iBio.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial

61

statement preparation and presentation. Management has performed an assessment of the effectiveness of iBio’s internal control over financial reporting as of June 30, 2021, based upon criteria set forth in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 COSO Framework).

Based on this assessment, management has concluded that our internal control over financial reporting were effective as of June 30, 2021.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act, during the quarter ended June 30, 2021, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
​

Report of Independent Registered Public Accounting Firm

This Annual Report on Form 10-K does not include an attestation report by CohnReznick LLP ("CohnReznick"), our independent registered public accounting firm, regarding internal control over financial reporting. As a smaller reporting company, our internal control over financial reporting was not subject to audit by our independent registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit us to provide only management’s report.

Item 9B. Other Information.

On September 23, 2021, the Board of Directors approved the award of a cash bonus to Mr. Isett of $509,000 and a grant of an option to purchase two million (2,000,000) shares of our common stock with an exercise price of $1.17, which vest in equal monthly installments over a 36-month period following the grant date, subject to the conditions of the iBio, Inc. 2020 Omnibus Incentive Plan, as amended.

​

Item 9C. Disclosure Regarding Foreign Jurisdictions That Prevent Inspections.

​

Not applicable

​

PART III

Certain information required by Part III is omitted from this Annual Report because we intend to file our definitive proxy statement for our 2021 Annual Meeting of Stockholders, pursuant to regulation 14A of The Exchange Act, not later than 120 days after the end of the fiscal year covered by this Annual Report and certain information to be included in the definitive proxy statement is incorporated herein by reference.

Item 10. Directors, Executive Officers and Corporate Governance

Information required by this Item that will appear under the headings “Governance,” “Executive Officers,” and “Delinquent Section 16(a) Reports” in the definitive proxy statement to be filed with the SEC relating to our 2021 Annual Meeting of Stockholders is incorporated herein by reference.

Code of Ethics

We have adopted a written code of ethics within the meaning of Item 406 of SEC Regulation S-K, which applies to all of our employees, including our principal executive officer and our chief financial officer, a copy of which can be found on our website at www.ibioinc.com. If we make any waivers or substantive amendments to the code of ethics that are applicable to our principal executive officer or our chief financial officer, we will disclose the nature of such waiver or

62

amendment in a Current Report on Form 8-K in a timely manner. No waivers from any provision of our policy have been granted.

Item 11. Executive Compensation and Director Compensation

Information required by this Item that will appear under the heading “Executive Compensation” and “Director Compensation” in the definitive proxy statement to be filed with the SEC relating to our 2021 Annual Meeting of Stockholders is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Information required by this Item that will appear under the headings “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the definitive proxy statement to be filed with the SEC relating to our 2021 Annual Meeting of Stockholders is incorporated herein by reference.

Item 13. Certain Relationships and Related Transactions, and Director Independence

Information required by this Item that will appear under the headings “Certain Relationships and Related Transactions” and “Independence of Board” in the definitive proxy statement to be filed with the SEC relating to our 2021 Annual Meeting of Stockholders is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services

Information required by this Item that will appear under the heading “Independent Auditor Fees and Other Matters” in the definitive proxy statement to be filed with the SEC relating to our 2021 Annual Meeting of Stockholders is incorporated herein by reference.

​

63

PART IV

Item 15. Exhibits and Financial Statement Schedules.

Item 16. Form 10-K Summary

Not Applicable

​

​

64

65

66

67

68

​

​

​

​

69

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

​

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:

​

​

​

70

Annual Financial Statements

iBio, Inc.

Financial Statement Index

​

​

​

​

F-1

Report of Independent Registered Public Accounting Firm

​

The Board of Directors and

Stockholders of iBio, Inc.

​

​

Opinion on the Financial Statements

​

We have audited the accompanying consolidated balance sheets of iBio, Inc. and Subsidiaries (the “Company”) as of June 30, 2021 and 2020, and the related consolidated statements of operations and comprehensive loss, stockholders’ equity and cash flows for each of the years then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of June 30, 2021 and 2020, and the results of its operations and its cash flows for each of the years then ended, in conformity with accounting principles generally accepted in the United States of America.

​

Basis for Opinion

​

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

​

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the entity’s internal control over financial reporting. Accordingly, we express no such opinion.

​

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

​

Critical Audit Matter

​

The critical audit matter communicated below are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

​

Settlement Agreement

​

Critical Audit Matter Description

​

As described in the notes to the consolidated financial statements, the Company entered into a confidential settlement agreement and mutual release to settle all claims and counterclaims associated with a lawsuit over ownership of, among other things, certain plant-based technology (“Settlement Agreement”). The Company evaluated the terms of the

F-2

Settlement Agreement as well as an additional license agreement (“License Agreement”) negotiated in conjunction with the Settlement Agreement in accordance with the requirements of Accounting Standards Codification (“ASC”) 450, Gain Contingencies, and ASC 606, Revenue Recognition.  

​

The financial reporting for the terms of the Settlement Agreement and License Agreement was identified as a critical audit matter because of the significant judgments made by management in assessing the substance of the components of the payments required under the Settlement Agreement, the likelihood of collectability of the future payments due under the Settlement Agreement as well as the consideration due under the License Agreement and the determination of whether a gain had been realized or is realizable.  The assessment of the financial reporting for the terms of the Settlement Agreement and License Agreement required auditor judgement, subjectivity and significant audit effort in performing audit procedures to evaluate the reasonableness of management’s conclusions on the Settlement Agreement.  

​

How the Critical Audit Matter was addressed in the Audit

​

Our principal audit procedures related to the Company’s financial reporting for the Settlement Agreement and License Agreement included, among others:

​

​

​

​

​

​

​

​

/s/ CohnReznick LLP

​

We have served as the Company's auditor since 2010.

​

Holmdel, New Jersey

​

September 28, 2021

​

​

​

​

F-3

iBio, Inc. and Subsidiaries

Consolidated Balance Sheets

(In Thousands, except share and per share amounts)

​

​

The accompanying notes are an integral part of these consolidated financial statements.

F-4

iBio, Inc. and Subsidiaries

Consolidated Statements of Operations and Comprehensive Loss

(In Thousands, except per share amounts)

​

​

The accompanying notes are an integral part of these consolidated financial statements.

​

F-5