Vision Marine (VMAR) F-1/ARegistration statement (foreign) (amended)

Table of Contents

As filed with the U.S. Securities and Exchange Commission on November 27, 2023

Registration No. 333-275503

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM F-1

Amendment No. 2

REGISTRATION STATEMENT

UNDER THE SECURITIES ACT OF 1933

VISION MARINE TECHNOLOGIES INC.

(Exact name of registrant as specified in its charter)

​

730 Boulevard du Curé-Boivin

Boisbriand, Québec J7G 2A7, Canada

Telephone: 450-951-7009

(Address of principal executive offices, including zip code, and telephone number, including area code)

Corporation Service Company

251 Little Falls Drive, Wilmington, DE 19808

Telephone: +1 302 636 5401

(Name, address, including zip code, and telephone number, including area code, of agent of service)

Copies to:

​

​

Approximate date of commencement of proposed sale to the public: As soon as practicable after this Registration Statement becomes effective.

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box. ☒

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act of 1933, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act of 1933, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act of 1933, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933.

Emerging growth company ☒

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act. ☐

The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until this Registration Statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to said Section 8(a), may determine

​

​

​

i

Table of Contents

TABLE OF CONTENTS

​

You should rely only on the information contained in this prospectus, any amendment or supplement to this prospectus or any free writing prospectus prepared by or on our behalf. Neither we, nor the underwriter, have authorized any other person to provide you with different or additional information. Neither we, nor the underwriter, take responsibility for, nor can we provide assurance as to the reliability of, any other information that others may provide. The underwriter is not making an offer to sell these securities in any jurisdiction where the offer or sale is not permitted. The information contained in this prospectus is accurate only as of the date of this prospectus or such other date stated in this prospectus, and our business, financial condition, results of operations and/or prospects may have changed since those dates.

Except as otherwise set forth in this prospectus, neither we nor the underwriter have taken any action to permit a public offering of these securities outside the United States or to permit the possession or distribution of this prospectus outside the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about and observe any restrictions relating to the offering of these securities and the distribution of this prospectus outside the United States.

Unless the context otherwise requires, in this prospectus, the term(s) “we”, “us”, “our”, “Company”, “our company”, “our business” and “Canadian Electric Boat Company” refer to Vision Marine Technologies Inc.

​

​

ii

RISK FACTORS

An investment in our common shares carries a significant degree of risk. You should carefully consider the following risks, as well as the other information contained in this prospectus, including our historical financial statements and related notes included elsewhere in this prospectus, before you decide to purchase the common shares. Any one of these risks and uncertainties has the potential to cause material adverse effects on our business, prospects, financial condition and operating results which could cause actual results to differ materially from any forward-looking statements expressed by us and a significant decrease in the value of our common shares. Refer to “Special Note Regarding Forward-Looking Statements”.

We may not be successful in preventing the material adverse effects that any of the following risks and uncertainties may cause. These potential risks and uncertainties may not be a complete list of the risks and uncertainties facing us. There may be additional risks and uncertainties that we are presently unaware of, or presently consider immaterial, that may become material in the future and have a material adverse effect on us. You could lose all or a significant portion of your investment due to any of these risks and uncertainties.

Risks Related to our Business and Industry

There is limited public information on our operating history.

Our limited public operating history makes evaluating our business and prospects difficult. Although we were formed in 2012, we did not provide public reports on the results of operations until our 2020 fiscal year. We only have five years of audited financial statements.

We currently have a net loss, and if we are unable to obtain and grow a net income in the future our ability to grow our business as planned will be adversely affected.

We have made significant up-front investments in research and development, sales and marketing, and general and administrative expenses to rapidly develop and expand our business. We had a net loss of $20,877,186 and $13,111,785 in our 2023 and 2022 fiscal years, respectively. Net loss may grow or we might never maintain net income in certain circumstances, many of which are beyond our control. Even after the use of the proceeds from this offering, our revenues might not significantly exceed our expenses or could be less than our expenses. It may take us longer to obtain and maintain net income than we anticipate, if at all, or we may only do so at a much lower rate than we anticipate. Failure to obtain our net income would mean that we would have to curtail our planned growth in operations or resort to financings to fund such growth.

In June 2021, we acquired EB Rental, Ltd. (“EBR”), and the acquired company may not perform as we expect.

In June 2021, we acquired all of the equity interests of 7858078 Canada Inc. which wholly-owns EBR, an electric boat rental company. Integrating businesses is a difficult, expensive, and time-consuming process. Our principal executive offices and manufacturing facility are located in Quebec, Canada and EBR’s operations are conducted, and its employees are mostly located, in California.

Revenues from EBR represented 71% and 65% of our total revenues in our 2023 and 2022 fiscal years. Future revenues from EBR may be affected by factors that are outside of our control, including:

If EBR’s revenues decrease significantly, it may cease to be profitable or our revenues may not be as large as we currently project.

A portion of our assets consist of equity in a third-party, and if that third party’s value decreases, our assets could be significantly reduced.

On May 14, 2021, we purchased $3,400,000 in debentures (the “Debentures”) from The Limestone Boat Company Limited (“Limestone”). Limestone is a North American designer and manufacturer of recreational and commercial powerboats. Because (i) Limestone announced that in January 2023 that its wholly-owned subsidiaries had filed for voluntary petitions for relief under Chapter 7 of the Bankruptcy Code of the U.S. Bankruptcy Court for the Middle District of Tennessee, (ii) the market price of Limestone’s common shares had fallen significantly below the conversion price set out in the Debentures and (iii) because we deemed it unlikely that we would convert the debt pursuant to the original terms of the Debentures, we agreed with Limestone on July 18, 2023 to convert the Debentures into approximately 7% of Limestones common shares. Prior to the conversion, the Company had recorded an impairment on the entire value of the Debentures at the amount of nil and $2,637,000 in the years ended August 31, 2022 and 2023, respectively. If Limestone is not able to perform above expectations, the value of our investment could be significantly reduced.

Our plan of operations entails promoting a product that we may never launch or which may not be commercially accepted if launched.

We have concentrated the majority of our research and development efforts on developing electric powertrain systems that we intend to rent and sell to Original Equipment Manufacturers (“OEM”) of boats. We expect the electric powertrain systems to represent the majority of our revenue in coming accounting periods. We have built prototypes of our electronic powertrain. We do not know if OEMs will find our product candidate to be an attractive component in their boats or if they will find the price of our electric powertrains to be acceptable. We do not currently have any significant customers for our electric powertrains. Although we have received LOIs from OEMs for over 1,000 powertrains through the year ended August 31, 2024, such LOIs are non-binding and may never result in any actual sales. Even if we do develop such relationships, we might not be able to maintain them or grow them as anticipated. At the time of our initial public offering, we had expected to begin the commercialization of our electric powertrains in 2020 but were not able to meet that preferred timeline and we may not meet our new timelines. Additionally, we had anticipated developing a 335-horsepower version within 18 months of our last annual report but currently do not believe that we will meet that anticipated date. If we are not successful in commercializing our product or if sales of our electric powertrain are less than we estimate, our business may not grow as expected, if at all, and we may fail.

To carry out our proposed business plan to build up inventory for order fulfilment, increase brand awareness and develop a new powertrain for our engines, we will require a significant amount of capital.

If current cash, cash equivalents and revenue from our business are not sufficient to cover our cash requirements, we will need to raise additional funds through the sale of debt or equity securities, in either private placements or additional registered offerings. By way of example, we have raised approximately US$11.4 million from a hybrid public/private offering of 2,771,135 common shares and warrants to buy 2,771,135 common shares from the start of our 2023 fiscal year to the date hereof. If we are unsuccessful in raising enough funds through such capital-raising efforts, we may review other financing possibilities such as bank loans. Financing might not be available to us or, if available, only on terms that are not favorable or acceptable to us.

Our ability to obtain the necessary financing to carry out our business plan is subject to a number of factors, including general market conditions and investor acceptance of our business plan. These factors may make the timing, amount, terms and conditions of such financing unattractive or unavailable to us. If we are unable to raise sufficient funds, we will have to significantly reduce our spending, delay or cancel our planned activities or substantially change our current corporate structure. We might not be able to obtain any funding, and we might not have sufficient resources to conduct our business as projected, both of which could mean that we would be forced to curtail or discontinue our operations.

Terms of subsequent financings may adversely impact your investment.

We may have to engage in common equity, debt, or preferred stock financing in the future. Your rights and the value of your investment in our securities could be reduced. The sale of common shares could dilute your net tangible book value per share and would dilute the voting power of your common shares. Common shares which we sell could be sold into the public market, which could adversely affect the market price. If we sell warrants, the exercise of those warrants, or the belief that they could soon be exercised, could place downward pressure on the market value of our common shares until such warrants are exercised. If we need to raise more equity capital from the sale of equity securities, institutional or other investors may negotiate terms at least as, and possibly more, favorable than the terms of your investment. Preferred stock could be issued in series from time to time with such designation, rights, preferences, and limitations as needed to raise capital. The terms of preferred stock could be more advantageous to those investors than to the holders of common shares.

The sale of debt securities could include interest, which could increase costs and negatively impact operating results, or contain rights to convert such debt into common shares, which could be at conversion price that is significantly below the then market price.

Our future growth depends upon consumers’ willingness to purchase electric powerboats.

Our growth highly depends upon the adoption by consumers of, and we are subject to an elevated risk of any reduced demand for, electric powerboats. Without such growth, sales of our electric powertrain, if any, and our electric boats may not grow at the rate that we anticipate, if such sales grow at all. If the market for electric powerboats does not develop as we expect or develops more slowly than we expect, our business, prospects, financial condition and operating results will be negatively impacted. Despite the long history of electric powerboats, the market for them is relatively new, rapidly evolving, characterized by rapidly changing technologies, price competition, additional competitors, evolving government regulation and industry standards, frequent new electric powerboat announcements and changing consumer demands and behaviors. Powerboats with conventional gas-powered motors may be deemed preferable to electric powerboats as they tend to be more powerful, have a longer range and/or cost less. Other factors that may influence the adoption of electric powerboats include:

The influence of any of the factors described above may cause current or potential customers not to purchase our electric powerboat, which would materially adversely affect our business, operating results, financial condition and prospects.

Our future growth depends upon consumers’ preference for outboard motors over inboard motors.

We envision the majority of our growth deriving from the sale of one of our product candidates, an electric powertrain for an outboard motor. If consumer preferences led to a decline in outboard motors, the OEMs we intend to sell to may produce less boats, and we may

not be able to sell as many electric powertrains as we anticipate, if we sell any at all. We may not be able to adapt the technology behind this powertrain for inboard motors or may only be able to do so in a way that is not cost effective.

We rely on a limited number of suppliers for key components of our finished products.

Although we manufacture all of our powerboats, we do so by assembling the component parts that we acquire from third-party suppliers rather than by producing any of those component parts ourselves. We materially depend on some of those third-party suppliers for certain components that we obtain from a limited number of suppliers, namely

As we purchase our components and parts through purchase orders and informal arrangements rather than long-term purchase agreements, we have not contractually secured a supply chain for these components and parts. As a result of the COVID-19 pandemic, some of our third-party suppliers have experienced delays in delivering parts and components for our products. If we continue to experience delays in receiving our supplies from these third-parties, if they significantly increased the cost of these components or if they ceased offering us these components, we would have to find new suppliers, which might not be possible on a timely basis, or cease production of the products in which the components are included.

The range of electric powerboats on a single charge declines over time, which may negatively influence potential customers’ decisions whether to purchase our boats or boats containing our electric powertrains.

The range of electric powerboats on a single charge declines principally as a function of usage, time and charging patterns. For example, a customer’s use of their powerboat as well as the frequency with which they charge the battery can result in additional deterioration of the battery’s ability to hold a charge. During the lifetime of the lead acid batteries in powerboats, 500 to 1000 recharge cycles are possible, and our lithium battery pack will retain approximately 85% of its ability to hold its initial charge after approximately 3,000 charge cycles and 8 years, which will result in a decrease to the boat’s initial range. Such battery deterioration and the related decrease in range may negatively influence potential customer decisions whether to purchase an electric boat, which may harm our ability to market and sell our boats. Likewise, if such reasoning deters potential customers from purchasing boats made by OEMs that use our electric powertrains, they may order fewer electric powertrains from us, if they ever order any at all.

Developments in alternative technologies or improvements in the internal combustion engine may materially adversely affect the demand for our electric powerboats.

Significant developments in alternative technologies, such as advanced diesel, ethanol, fuel cells or compressed natural gas, or improvements in the fuel economy of the internal combustion engine, may materially and adversely affect our business and prospects in ways we do not currently anticipate. For example, fuel which is abundant and relatively inexpensive in North America, such as compressed natural gas, may emerge as consumers’ preferred alternative to petroleum-based propulsion. Any failure by us to develop new or enhanced technologies or processes, or to react to changes in existing technologies, could materially delay our development and introduction of new and enhanced electric powerboats, which could result in the loss of competitiveness of our boats, decreased revenue and a loss of market share to competitors.

If we are unable to keep up with advances in electric powerboat technology, we may suffer a decline in our competitive position.

We may be unable to keep up with changes in electric powerboats technology, particularly developments with powertrains. As a result, we may suffer a decline in our competitive position. Any failure to keep up with advances in electric powerboat technology would result in a decline in our competitive position which would materially and adversely affect our business, prospects, operating results and financial condition. Our research and development efforts may not be sufficient to adapt to changes in electric powerboat technology. As technologies change, we plan to upgrade or adapt our electric powertrain candidate. We would additionally upgrade our boats and introduce new models to take advantage of these changes. However, our technology and boats may not compete effectively with alternative technology or powerboats if we are not able to source and integrate the latest technology. For example, we do not manufacture either lead or lithium battery cells which makes us depend upon suppliers of battery cell technology for our battery packs.

Demand in the powerboat industry is highly volatile.

Volatility of demand in the powerboat industry, especially for recreational powerboats and electric powerboats, may materially and adversely affect our business, prospects, operating results and financial condition. The markets in which we will be competing have been subject to considerable volatility in demand in recent periods. Demand for recreational powerboat and electric powerboat sales depends to a large extent on general, economic and social conditions in a given market. Historically, sales of recreational powerboats decrease during economic downturns. We have fewer financial resources than more established powerboat manufacturers to withstand adverse changes in the market and disruptions in demand.

Unfavorable weather conditions may have a material adverse effect on our business, financial condition, and results of operations, especially during the peak boating season.

Adverse weather conditions in any year in any particular geographic region may adversely affect sales in that region, especially during the peak boating season. Sales of our products are generally stronger just before and during spring and summer, which represent the peak boating months in most of our markets, and favorable weather during these months generally has a positive effect on consumer demand. Conversely, unseasonably cool weather, excessive rainfall, reduced rainfall levels, or drought conditions during these periods may close area boating locations or render boating dangerous or inconvenient, thereby generally reducing consumer demand for our products. Our annual results would be materially and adversely affected if our net sales were to fall below expected seasonal levels during these periods. Adverse weather could also affect income from our rental business as we tend to rent significantly less boats on rainy or otherwise unappealing days than on sunny and attractive ones. If we experience more rainy or otherwise unappealing days at our marinas than normal, our income from the rental of electric boats could materially decline.

We may also experience more pronounced seasonal fluctuation in net sales in the future as we continue to expand our businesses. Additionally, to the extent that unfavorable weather conditions are exacerbated by global climate change or otherwise, our sales may be affected to a greater degree than we have previously experienced.

We intend to increasingly use our network of independent dealers, and we will face increasing competition for dealers and have little control over their activities.

Currently, most of our sales are directly placed with us online, but approximately 15% of our sales in our 2023 fiscal year were derived from our network of independent dealers. We have agreements with dealers in our network that typically provide for terms of between 1 and 3 years. While we will continue to market direct sales through our website, we seek to increase revenues and diversify our sales points by expanding our network of independent dealers. We envision an increase in the number of dealers supporting our products and the quality of their marketing and servicing efforts being essential to our ability to increase sales. We may not be successful in our effort to grow our network of independent dealers.

Competition for dealers among recreational powerboat manufacturers continues to increase based on the quality, price, value and availability of the manufacturers’ products, the manufacturers’ attention to customer service and the marketing support that manufacturers provide to dealers. We will face intense competition from other recreational powerboat manufacturers in attracting and retaining dealers, and we might not be able to attract or retain relationships with qualified and successful dealers as well as our competition, if at all. We might not be able to maintain or improve our relationship with dealers or our market share position. In addition, independent dealers in the recreational powerboat industry have experienced significant consolidation in recent years, which could inhibit our ability to retain them or result in the loss of one or more of our dealers in the future if the surviving entity in any such

consolidation purchases similar products from a competitor. If we do not establish a significant network of dealers, our future sales could fail to meet our projections, and our business, financial condition and results of operations may be adversely affected.

We envision that our success will depend, in part, upon the financial health of our dealers and their continued access to financing.

We seek to increase revenues and diversify our sales points by expanding our network of independent dealers. The financial health of our current and any future dealers is critical to our success. Our business, financial condition and results of operations may be adversely affected if the financial health of dealers that sell our products suffers. Their financial health may suffer for a variety of reasons, including a downturn in general economic conditions, rising interest rates, higher rents, increased labor costs and taxes, compliance with regulations and personal financial issues.

In addition, dealers require adequate liquidity to finance operations, including purchases of our products. Dealers are subject to numerous risks and uncertainties that could unfavorably affect their liquidity positions, including, among other things, continued access to adequate financing sources on a timely basis on reasonable terms. These sources of financing are vital to our ability to sell products through our distribution network. Access to floor plan financing generally facilitates dealers’ ability to purchase powerboats from us, and their financed purchases reduce our working capital requirements. If floor plan financing were not available to our dealers, our sales and our working capital levels could be adversely affected. The availability and terms of financing offered by dealers’ floor plan financing providers will continue to be influenced by:

Changes to trade policy, tariffs, and import/export regulations may have a material adverse effect on our business, financial condition, and results of operations.

Although we manufacture our products in Canada, in our last fiscal year approximately 71% of our sales occurred in the United States, a percentage that could increase as our operations expand. Changes in laws and policies governing foreign trade could adversely affect our business. As a result of recent policy changes, there may be greater restrictions and economic disincentives on international trade. We will particularly be affected by the Agreement Between the United States of America, the United Mexican States, and Canada (commonly known as USMCA), if ratified by all participants, the effects of which are not certain. Additionally, a large portion of the parts and components that we use are imported and their price and availability could be subject to changes in export and import tariffs and controls. Such changes have the potential to adversely impact the global and local economies, our industry and global demand for our products and, as a result, could have a material adverse effect on our business, financial condition and results of operations.

Interest rates and energy prices affect marine products’ sales

Although our products are not frequently financed by our dealers and retail powerboat consumers, we envision this becoming more common as we expand our operations and grow our network of distributors. This may not occur if interest rates meaningfully rise because higher rates increase the borrowing costs and, accordingly, the cost of doing business for dealers and the cost of powerboat purchases for consumers. Energy costs can represent a large portion of the costs to manufacture our products and increase their ultimate sales price. Therefore, higher interest rates and fuel costs can adversely affect consumers’ decisions relating to recreational powerboating purchases.

We have a large fixed cost base that will affect our profitability if our sales decrease.

The fixed cost levels of operating a recreational powerboat manufacturer can put pressure on profit margins when sales and production decline. Our profitability depends, in part, on our ability to spread fixed costs over a sufficiently large number of products sold and shipped, and if we decide to reduce our rate of production, gross or net margins could be negatively affected. Consequently, decreased demand or the need to reduce production can lower our ability to absorb fixed costs and materially impact our financial condition or results of operations.

We depend on certain key personnel, and our success will depend on our continued ability to retain and attract such qualified personnel.

Our success depends on the efforts, abilities and continued service of Alexandre Mongeon, our Chief Executive Officer, Xavier Montagne, our Chief Operating Officer, and Kulwant Sandher, our Chief Financial Officer. A number of these key employees and consultants have significant experience in the recreational boating and manufacturing industry. A loss of service from any one of these individuals may adversely affect our operations, and we may have difficulty or may not be able to locate and hire a suitable replacement. We have not obtained any “key person” insurance on certain key personnel.

We are subject to numerous environmental and health and safety laws and any breach of such laws may have a material adverse effect on our business and operating results.

We are subject to numerous environmental and health and safety laws, including statutes, regulations, bylaws and other legal requirements. These laws relate to the generation, use, handling, storage, transportation and disposal of regulated substances, including hazardous substances (such as batteries), dangerous goods and waste, emissions or discharges into soil, water and air, including noise and odors (which could result in remediation obligations), and occupational health and safety matters, including indoor air quality. These regulations also apply to any contamination that our powerboats cause in the lakes and rivers in which they operate. These legal requirements vary by location and can arise under federal, provincial, state or municipal laws. Any breach of such laws and/or requirements would have a material adverse effect on our company and its operating results.

Our powerboats are subject to mandated safety standards and failure to meet those standards would have a material adverse effect on our business and operating results.

Given the inherent dangers involved with powerboats, all powerboats sold must comply with federal, state and provincial safety standards. Additionally, most powerboats sold in the United States meet the safety standards set by the ABYC, a non-profit, member organization that develops voluntary safety standards for the design, construction, maintenance, and repair of recreational powerboats and the NMMA. Our powerboats have been certified by the United States Coast Guard, the Canadian Coast Guard, meet the ABYC safety standards and have received CE marking indicating their conformity with health, safety, and environmental protection standards within the European Economic Area. Loss of any of these certifications or failure to obtain them for future products could have a material adverse effect on our business and operating results.

We intend to rely on a third-party for the manufacture of what we envision will become our principal product.

If we are able to commercialize our E-Motion™ electric powertrain, we intend to use a third-party to mass produce our powertrains. In October 2021, we entered into a Manufacture and Supply Agreement with Linamar Corporation, a provider of manufacturing solutions and a developer of highly engineered products. Under the terms of the agreement, we intend for McLaren Engineering, Linamar’s technology and product development team for its advanced mobility segment, to manufacture and assemble our E-Motion™ technology through testing, parts, tooling development, and designing the union assembly for mass production of our electric powertrain at Linamar’s facility in Canada. Once we have scaled up the production of our electric powertrain, we intend for the Linamar Corporation to produce our electric powertrain for mass commercialization. If Linamar Corporation is unable to satisfactorily manufacture our E-Motion™ powertrains, we will be forced to find a new third-party manufacturer or to produce such powertrains inhouse (with our current facilities we believe that we are limited to producing 300 electric powertrains per year in addition to producing 150 boats per year). Any such change in manufacturers could lead to a delay in our ability to deliver on purchase orders or the loss of such purchase orders, which in turn could adversely affect our revenue or the timing of our revenue.

If we are unable to meet the service requirements of our customers, our business will be materially and adversely affected.

We do not offer warranties or provide service for our boats and do not intend to offer warranties on our powertrains systems. Instead, the purchasers of our boats and of our powertrains may rely upon the warranties and services of the manufacturers of the components used in our boats. As all such warranties are provided by third-party suppliers, the quality and timeliness of such service is outside of our control. Additionally, the terms of such warranties, including the length of time of coverage, and servicing terms, including locations and labor cost, are not uniform. If our purchasers and potential purchasers believe that warranties and servicing capabilities provided by our third-party suppliers are unable to successfully address their service requirements, the reputation of our brand will suffer and business and prospects could be materially and adversely affected.

If we are unable to meet our production and development goals, we may need to change our business plans or the timeline in which we expect to carry them out

Our ability to carry out our business plans depends upon meeting our production and development goals. Delays or failures in meeting these goals could require us to reassess our business plans and the timeline that it will take us to implement those plans. In the past we have not always met our production and development goals. For example, we expected to manufacture approximately 50 powerboats, and begin commercialization of our electric powertrains in calendar 2023, and we will not meet these goals. If any such delays or failures were to cause a material change to our proposed business plans, such change could result materially adverse changes in our projected revenues or expenses.

We may not succeed in establishing, maintaining and strengthening the Vision Marine Technologies Inc. brand, which would materially and adversely affect customer acceptance of our boats and components and our business, revenues and prospects.

Our business and prospects heavily depend on our ability to develop, maintain and strengthen the Vision Marine Technologies brand and the brands of our powerboat models. Any failure to develop, maintain and strengthen these brands may materially and adversely affect our ability to sell our products. If we are not able to establish, maintain and strengthen our brands, we may lose the opportunity to build our customer base. We expect that our ability to develop, maintain and strengthen the Vision Marine Technologies brand will also depend heavily on the success of our marketing efforts. To further promote our brand, we may be required to change our marketing practices, which could result in substantially increased advertising expenses, including the need to use traditional media such as television, radio and print. Many of our current and potential competitors have greater name recognition, broader customer relationships and substantially greater marketing resources than we do. If we do not develop and maintain strong brands, our business, prospects, financial condition and operating results will be materially and adversely impacted.

Increases in costs, disruption of supply or shortage of raw materials, in particular lithium-ion cells, could harm our business.

Although we do not materially use raw materials in the production of our electronic powerboats, we purchase the necessary parts and components for our boats from third-party suppliers that do. Were those third-party suppliers to experience increases in the cost or a sustained interruption in the supply or shortage of raw materials, the corresponding parts and components could become more costly or less available (if still available at all). For example, our supply chain has been impacted by the COVID-19 pandemic as some of our third-party suppliers have experienced delays in delivering parts and components for our products. We are particularly exposed to a supply-chain risk as we have not contractually secured long-term supply commitments at fixed prices with our third-party suppliers. The prices for these raw materials fluctuate depending on market conditions and global demand for these materials and price fluctuations and material shortages could adversely affect our business and operating results. For instance, we are exposed to multiple risks relating to price fluctuations for lithium-ion cells. These risks include:

Our business depends on the continued supply of battery cells for our boats. We do not currently have any agreements for the supply of batteries and depend upon the open market for their procurement. Any disruption in the supply of battery cells from our supplier could temporarily disrupt the planned production of our boats until such time as a different supplier is fully qualified. Moreover, battery cell manufacturers may choose to refuse to supply electric boat manufacturers to the extent they determine that the boats are not sufficiently safe. Furthermore, current fluctuations or shortages in petroleum and other economic conditions may cause us to experience significant increases in freight charges and raw material costs. Substantial increases in the prices for our raw materials would increase our operating costs and could reduce our margins if we cannot recoup the increased costs through increased electric boat prices. We might not be able to recoup increasing costs of raw materials by increasing boat prices. We publish the price for the base model of our powerboats. However, any attempts to increase the published prices in response to increased raw material costs could be viewed negatively by our potential customers, result in cancellations of orders and could materially adversely affect our brand, image, business, prospects and operating results.

If our suppliers sell us parts or components containing conflict minerals, we may be required at significant expense to find suppliers that do not use conflict minerals.

In 2010, Congress passed the Dodd-Frank Wall Street Reform and Consumer Protection Act (“Dodd-Frank Act”) requiring the Securities and Exchange Commission (“SEC”) to issue rules specifically relating to the use of “Conflict Minerals” within manufactured products. Conflict Minerals are currently defined by U.S. Law as tin, tantalum, tungsten and gold (also known as “3TG”) and related derivatives. Within a year of becoming a public company, the SEC rules require any SEC registrant whose commercial products contain any 3TG (“3TG Product”) to determine whether the 3TG in the 3TG Product originated from the Democratic Republic of the Congo (“DRC”) or adjoining countries (collectively, the “DRC Region”) and, if so, whether the 3TG is “conflict free”. “3TG Conflict Free” means that the supply chain is transparent and the 3TG in 3TG Products does not directly or indirectly benefit armed groups responsible for serious human rights abuses in the DRC Region. By enacting this provision, Congress intends to further the humanitarian goal of ending the extremely violent conflict in the DRC Region, which has been partially financed by the exploitation and trade of 3TG originating in the DRC Region.

We will need to expend time and money on determining whether our products contain conflict minerals. If our suppliers use conflict minerals in the production of the parts and components that we purchase from them, we may need to find alternative suppliers. If possible, this may only be possible at significant expense or with material delays in production.

Our software to control our electric powertrain systems contains “open source” software, and any failure to comply with the terms of one or more of these open source licenses could negatively affect our business.

We use software to control our electric powertrain systems that relies upon “open source” licenses and intend to use such software in the future. Although we do not believe that the open source code we have used imposes any limitations on the use of the software that we have developed, the terms of many open source licenses have not been interpreted by United States or other courts, and there is a risk that these licenses could be construed in a manner that could impose unanticipated conditions or restrictions on our ability to commercialize our solutions including requirements that we make available source code for modifications or derivative works we create based upon the open source software or license such modifications or derivative works. In addition to risks related to license requirements, usage of open source software can lead to greater risks than use of third-party commercial software, as open source licensors generally do not provide warranties or controls on origin of the software. We cannot be sure that all open source is submitted for approval prior to use in our solutions. In addition, many of the risks associated with usage of open source cannot be eliminated, and could, if not properly addressed, negatively affect the performance of our electric powertrains and our business.

We rely on network and information systems and other technologies for our business activities and certain events, such as computer hackings, viruses or other destructive or disruptive software or activities may disrupt our operations, which could have a material adverse effect on our business, financial condition and results of operations.

Network and information systems and other technologies are important to our business activities and operations. Network and information systems-related events, such as computer hackings, cyber threats, security breaches, viruses, or other destructive or disruptive software, process breakdowns or malicious or other activities could result in a disruption of our services and operations or improper disclosure of personal data or confidential information, which could damage our reputation and require us to expend resources to remedy any such breaches. Moreover, the amount and scope of insurance we maintain against losses resulting from any such events or security breaches may not be sufficient to cover our losses or otherwise adequately compensate us for any disruptions to our businesses that may result, and the occurrence of any such events or security breaches could have a material adverse effect on our business and results of operations. The risk of these systems-related events and security breaches occurring has intensified, in part because we maintain certain information necessary to conduct our businesses in digital form stored on cloud servers. While we develop and maintain systems seeking to prevent systems-related events and security breaches from occurring, the development and maintenance of these systems is costly and requires ongoing monitoring and updating as technologies change and efforts to overcome security measures become more sophisticated. Despite these efforts, there can be no assurance that disruptions and security breaches will not occur in the future. Moreover, we may provide certain confidential, proprietary and personal information to third parties in connection with our businesses, and while we obtain assurances that these third parties will protect this information, there is a risk that this information may be compromised. The occurrence of any of such network or information systems-related events or security breaches could have a material adverse effect on our business, financial condition and results of operations.

If the governmental grants and tax credits that we receive were to be no longer available, our net earnings would be materially reduced.

We receive governmental benefits in connection with our operations. In connection with the production of our powerboats and our research into green technology, we have been able to receive tax credits and grants provided by the Quebec provincial government and the Canadian federal government. In our 2023 and 2022 fiscal years, we recognized grants and investment tax credits amounting to $0.2 million and $1.5 million, respectively, of which $0.14 million and $1.4 million, respectively, is presented against research and development expenses. We intend to continue applying for such grants and receiving such tax credits. Without such grants and tax credits, our net loss in each of the past two fiscal years would have been larger. If they were no longer available, our business, prospects, financial condition and operating results could be adversely affected.

The unavailability, reduction or elimination of government regulations on waterways could have a material adverse effect on our business, financial condition, operating results and prospects.

Although we are unaware of substantial governmental economic incentives, such as tax credits and rebates, that customers may receive in connection with the purchase of our products, there are certain governmental regulations whose repeal could affect the desirability of our powerboats. In particular, local and regional restrictions of internal combustion engines on certain waterways make electric boats an attractive alternative for use in such lakes and rivers. Any reduction, elimination or discriminatory application of such rules because of policy changes or other reasons may result in the diminished competitiveness of electric boats generally. This could materially and adversely affect the growth of our market and our business, prospects, financial condition and operating results.

If we fail to manage future growth effectively, we may not be able to market or sell our powerboats or powertrains successfully.

Any failure to manage our growth effectively could materially and adversely affect our business, prospects, operating results and financial condition. We plan to expand our operations in the near future. Our future operating results depend to a large extent on our ability to manage this expansion and growth successfully. Risks that we face in undertaking this expansion include:

We intend to continue to hire a number of additional personnel, including design and manufacturing personnel and service technicians for our electric boats and powertrains. Competition for individuals with experience designing, manufacturing and servicing electric boats is intense, and we may not be able to attract, assimilate, train or retain additional highly qualified personnel in the future. The failure to attract, integrate, train, motivate and retain these additional employees could seriously harm our business and prospects.

Our business may be adversely affected by labor and union activities.

None of our employees are currently represented by a labor union, it is common in Quebec for employees of manufacturers of a certain size to belong to a union. Although we do not believe that we are currently of a size where our employees will unionize, were they to do so now or in the future, we would be at risk for higher employee costs and increased risk of work stoppages. We also directly and indirectly depend upon other companies with unionized work forces, such as parts suppliers and trucking and freight companies, and work stoppages or strikes organized by such unions could have a material adverse impact on our business, financial condition or operating results. If a work stoppage occurs within our business, that of our key suppliers or our network of distributors, it could

materially reduce the manufacture and sale of our boats and have a material adverse effect on our business, prospects, operating results or financial condition.

Our ability to meet our manufacturing workforce needs is crucial to our results of operations and future sales and profitability.

We rely on the existence of an available hourly workforce to manufacture our products. We cannot assure you that we or any third-party manufacturer that we use will be able to attract and retain qualified employees to meet current or future manufacturing needs at a reasonable cost, or at all. For instance, the demand for skilled employees has increased recently with the low unemployment rates in Quebec. Competition for qualified employees could require us or third-party manufacturers to pay higher wages to attract a sufficient number of employees. Significant increases in manufacturing workforce costs could materially adversely affect our business, financial condition or results of operations.

We compete with a variety of other activities for consumers’ scarce leisure time.

Our powerboats are used for recreational and sport purposes, and demand for our powerboats may be adversely affected by competition from other activities that occupy consumers’ leisure time and by changes in consumer lifestyle, usage pattern or taste. Similarly, an overall decrease in consumer leisure time may reduce consumers’ willingness to purchase and enjoy our products.

Product liability, warranty, personal injury, property damage and recall claims may materially affect our financial condition and damage our reputation.

We are engaged in a business that exposes us to claims for product liability and warranty claims in the event our products actually or allegedly fail to perform as expected or the use of our products results, or is alleged to result, in property damage, personal injury or death. Our products involve kinetic energy, produce physical motion and are to be used on the water, factors which increase the likelihood of injury or death. Our products contain Lithium-ion batteries, which have been known to catch fire or vent smoke and flame, and chemicals which are known to be, or could later be proved to be, toxic carcinogenic. Any judgment or settlement for personal injury or wrongful death claims could be more than our assets and, even if not justified, could prove expensive to contest.

We do not provide warranties for our powerboats but instead rely upon the warranties provided by the third-party manufacturers from whom we purchase the components for our powerboats. Although we maintain product and general liability insurance of the types and in the amounts that we believe are customary for the industry, we are not fully insured against all such potential claims. We may experience legal claims in excess of our insurance coverage or claims that are not covered by insurance, either of which could adversely affect our business, financial condition and results of operations. Adverse determination of material product liability and warranty claims made against us could have a material adverse effect on our financial condition and harm our reputation. In addition, if any of our products or components in our products are, or are alleged to be, defective, we may be required to participate in a recall of that product or component if the defect or alleged defect relates to safety. Any such recall and other claims could be costly to us and require substantial management attention.

Our intellectual property is not protected through patents or formal copyright registration. As a result, we do not have the full benefit of patent or copyright laws to prevent others from replicating our products, product candidates and brands.

Apart from trademark applications that we filed with the Canadian Intellectual Property Office and the U.S. Patent and Trademark Office for our logo and the brand name “E-Motion”, we have not protected our intellectual property rights through patents or formal copyright or trademark registration, and we do not currently have any patent applications pending. As we intend to transition into the production of electric powertrains to OEMs, we envision our intellectual property and its security becoming more vital to our future. Until we protect our intellectual property through patent, trademarks and registered copyrights, we may not be able to protect our intellectual property and trade secrets or prevent others from independently developing substantially equivalent proprietary information and techniques or from otherwise gaining access to our intellectual property or trade secrets. In such an instance, our competitors could produce products that are nearly identical to ours resulting in us selling less products or generating less revenue from our sales.

Confidentiality agreements with employees and others may not adequately prevent disclosure of trade secrets and other proprietary information.

We rely on trade secrets, know-how and technology, which are not protected by patents, to protect the intellectual property behind our electric powertrain and for the construction of our boats. We do not yet use confidentiality agreements with our collaborators, employees,

consultants, outside scientific collaborators and sponsored researchers and other advisors to protect our proprietary technology and processes. We intend to use such agreements in the future, but these agreements may not effectively prevent disclosure of confidential information and may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. In addition, others may independently discover trade secrets and proprietary information, and in such cases we could not assert any trade secret rights against such party. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights, and failure to obtain or maintain trade secret protection could adversely affect our competitive business position.

Any patent applications that we file may not result in issued patents, which may have a material adverse effect on our ability to prevent others from interfering with our commercialization of our products.

To date, we have not filed any patent applications, and we might not ever file patent applications. The registration and enforcement of patents involves complex legal and factual questions and the breadth and effectiveness of patented claims is uncertain. If we ever file patent applications in connection with our electric outboard powertrain systems or other matters, we cannot be certain that we will be first to file patent applications on those or other inventions, nor can we be certain that such patent applications will result in issued patents or that any of our issued patents will afford sufficient protection against someone creating competing products, or as a defensive portfolio against a competitor who claims that we are infringing its patents. In addition, patent applications filed in foreign countries are subject to laws, rules and procedures that differ from those of the United States, and thus we cannot be certain that foreign patent applications, if any, will result in issued patents in those foreign jurisdictions or that such patents can be effectively enforced, even if they relate to patents issued in the United States.

We have limited registered trademarks for our products and trade names.

We have submitted applications for registered trademarks for our name and some of our brands, but not all of these applications have been granted. Any pending trademark applications that we filed with a relevant governmental authority for brand names/logos might not be approved as might any such future applications. Failure to obtain such approval could limit our ability to use the brand names/logos in those territories or lead our products to be confused with, and/or tarnished by, competing products. Even if appropriate applications were made and approved, third parties may oppose or otherwise challenge such applications or registrations.

We may need to defend ourselves against patent or trademark infringement claims, which may be time-consuming and would cause us to incur substantial costs.

The status of the protection of our intellectual property is unsettled as we do not have any patents, trademarks or registered copyrights and have not applied for the same. Companies, organizations or individuals, including our competitors, may hold or obtain patents, trademarks or other proprietary rights that would prevent, limit or interfere with our ability to make, use, develop, sell or market our powerboats and electric powertrains or use third-party components, which could make it more difficult for us to operate our business. From time to time, we may receive communications from third parties that allege our products or components thereof are covered by their patents or trademarks or other intellectual property rights. Companies holding patents or other intellectual property rights may bring suits alleging infringement of such rights or otherwise assert their rights. If we are determined to have infringed upon a third party’s intellectual property rights, we may be required to do one or more of the following:

In the event of a successful claim of infringement against us and our failure or inability to obtain a license to the infringed technology or other intellectual property right, our business, prospects, operating results and financial condition could be materially adversely affected. In addition, any litigation or claims, whether or not valid, could result in substantial costs, negative publicity and diversion of resources and management attention.

You may face difficulties in protecting your interests, and your ability to protect your rights through the U.S. federal courts may be limited because we are incorporated under the laws of the Province of Quebec, a substantial portion of our assets are in Canada and the majority of our directors and executive officers reside outside the United States

We are constituted under the laws of the Business Corporations Act (Quebec) (the “Business Corporation Act”) and our executive offices are located outside of the United States in Boisbriand, Quebec. Most of our officers, and directors, as well as our auditor reside outside the United States. In addition, a substantial portion of their assets and our assets are located outside of the United States. As a result, you may have difficulty serving legal process within the United States upon us or any of these persons. You may also have difficulty enforcing, both in and outside of the United States, judgments you may obtain in U.S. courts against us or these persons in any action, including actions based upon the civil liability provisions of U.S. Federal or state securities laws. Furthermore, there is substantial doubt as to the enforceability in Canada against us or against any of our directors, officers and the expert named in this prospectus who are not residents of the United States, in original actions or in actions for enforcement of judgments of U.S. courts, of liabilities based solely upon the civil liability provisions of the U.S. federal securities laws. In addition, shareholders in Quebec corporations may not have standing to initiate a shareholder derivative action in U.S. federal courts.

As a result, our public shareholders may have more difficulty in protecting their interests through actions against us, our management, our directors or our major shareholders than would shareholders of a corporation incorporated in a jurisdiction in the United States.

Global economic conditions could materially adversely impact demand for our products and services.

Our operations and performance depend significantly on economic conditions. Global financial conditions continue to be subject to volatility arising from international geopolitical developments and global economic phenomenon, as well as general financial market turbulence, including a significant market reaction to the novel coronavirus (COVID-19) and the ongoing war in Ukraine and the Middle East, resulting in a significant reduction in many major market indices. Uncertainty about global economic conditions could result in

accordingly, on our business, results of operations or financial condition. Access to public financing and credit can be negatively affected by the effect of these events on Canadian, U.S. and global credit markets. The health of the global financing and credit markets may affect our ability to obtain equity or debt financing in the future and the terms at which financing or credit is available to us. These instances of volatility and market turmoil could adversely affect our operations and the trading price of our common shares.

Our business may be materially affected by the COVID-19 Outbreak

The continued novel coronavirus (COVID-19) pandemic, including variations from new strains, may disrupt our business and operational plans. These disruptions may include disruptions resulting from (i) shortages of employees, (ii) unavailability of contractors and subcontractors, (iii) interruption of, or price fluctuations in, supplies from third parties upon which we rely, (iv) restrictions that governments impose to address the COVID-19 outbreak, and (v) restrictions that we and our contractors and subcontractors impose to ensure the safety of employees and others. Although we have not noticed any decrease to orders that we would attribute to COVID-19, we believe that COVID-19 is impacting our supply chain by increasing the amount of time between ordering third-party materials needed for our boats and their delivery. Continued delays in our supply chain could adversely impact our production and, in turn, our revenues. Further, it is presently not possible to predict the extent or durations of these disruptions. These disruptions may have a material adverse effect on our business, financial condition and results of operations. Such adverse effect could be rapid and unexpected. These disruptions may severely affect our ability to carry out our business plans.

Our financial statements have been prepared on a going concern basis and our financial status creates a substantial doubt whether we will continue as a going concern.

Our financial statements have been prepared on a going concern basis under which an entity is considered to be able to realize its assets and satisfy its liabilities in the ordinary course of business. Our future operations are dependent upon the identification and successful completion of equity or debt financing and the achievement of profitable operations at an indeterminate time in the future. There can be no assurances that we will be successful in completing an equity or debt financing or in achieving or maintaining profitability. The financial statements do not give effect to any adjustments relating to the carrying values and classification of assets and liabilities that would be necessary should we be unable to continue as a going concern.

Fluctuations in currency exchange rates may significantly impact our results of operations.

Our operations are conducted in the United States and Canada, but approximately 90% of our sales and rentals have occurred in the United States. As a result, we are exposed to an exchange rate risk between U.S. and Canadian dollars. The exchange rates between these currencies in recent years have fluctuated significantly and may continue to do so in the future. In our fiscal 2023, the monthly average exchange rate as published by the Bank of Canada ranged from a high of US$1.00:$1.3700 to a low of US$1.00:1.3215. An appreciation of the Canadian dollar against the U.S. dollar could increase the relative cost of our products outside of Canada, which could lead to decreased sales. Conversely, to the extent that we are required to pay for goods or services in U.S. dollars, the depreciation of the Canadian dollar against the U.S. dollar would increase the cost of such goods and services.

We do not hedge our currency exposure and, therefore, we incur currency transaction risk whenever we enter into either a purchase or sale transaction using a currency other than the Canadian dollar. Given the volatility of exchange rates, we might not be able to effectively manage our currency transaction risks, and volatility in currency exchange rates might have a material adverse effect on our business, financial condition or results of operations.

If we experience material weaknesses or otherwise fail to maintain an effective system of internal controls over financial reporting, we may not be able to accurately or timely report our financial condition or results of operations, which may adversely affect investor confidence in us and, as a result, the value of our common shares.

For our fiscal year ended August 31, 2023, we identified that we did not maintain effective processes and controls over the accounting for and reporting of complex and non-routine transactions due to a material weakness. Specifically, we determined that there was a lack of sufficient accounting and finance personnel to enable appropriate level of internal controls within the financial statement close process, including performing in-depth analysis and review of complex accounting matters and non-routine transactions within the timeframes set by us for filing our consolidated financial statements. Because of this deficiency, we concluded there was a reasonable possibility that a material misstatement of our financial statements will not be prevented or detected on a timely basis at August 31, 2023. We are working on remediating the identified material weakness.

If we fail to identify or remediate any current or future material weaknesses in our internal controls over financial reporting, if we are unable to conclude that our internal controls over financial reporting are effective or if our independent registered public accounting firm is unable to express an opinion as to the effectiveness of our internal controls over financial reporting when we are no longer an emerging growth company, investors may lose confidence in the accuracy and completeness of our financial reports and the market price of our common shares could be negatively affected. As a result of such failures, we could also become subject to investigations by Nasdaq, the SEC or other regulatory authorities, and become subject to litigation from investors and shareholders, which could harm our reputation and financial condition or divert financial and management resources from our regular business activities.

Risks Related to Our Common Shares and this Offering

If you purchase the common shares, you will experience immediate dilution as a result of this offering.

Since the price per share of our common shares being offered is substantially higher than the net tangible book value per share of our common shares, you will suffer immediate and substantial dilution in the net tangible book value of the common shares you purchase in this offering. After giving effect to the sale by us of 8,108,108 common shares at the assumed offering price of US$1.85 per common share (as set out on the cover page hereto), if you purchase common shares in this offering, you will suffer immediate dilution of approximately $1.08 per share in the net tangible book value of the common shares.

Our executive officers and directors beneficially will own approximately 16.6% of our common shares after completion of the proposed offering.

If we sell 8,108,108 common shares in this offering (which excludes any shares that may be sold as a result of the underwriter’s over-allotment option) at the assumed offering price of US$1.85 per share, our executive officers and directors will beneficially own, in the aggregate, 16.6% of our common shares, which includes shares that our executive officers and directors have the right to acquire pursuant to stock options which have vested or will vest within the next 60 days. As a result, they will be able to exercise a significant level of control over all matters requiring shareholder approval, including the election of directors, amendments to our Articles of Incorporation and approval of significant corporate transactions. This control could have the effect of delaying or preventing a change of control of our company or changes in management and will make the approval of certain transactions difficult or impossible without the support of these shareholders.

The market price and liquidity of our common shares may be volatile and may fluctuate in a way that is disproportionate to our operating performance.

Our common shares began trading on the Nasdaq Capital Market in November 2020. From the date of the start of our last fiscal year to the date hereof, the highest closing price of our common shares on the Nasdaq Capital Market was US$7.59 and the lowest such closing price was US$1.75. Additionally, the liquidity of our common shares may decrease, meaning that the demand for the purchase of our shares may not be at a level that allows for your sale at a desirable price or even the then market price when if you wish to sell your common shares. The market value of our common shares and their liquidity will continue to fluctuate due to the impact of any of the following factors:

We do not intend to pay dividends and there will thus be fewer ways in which you are able to make a gain on your investment.

We have never paid any cash or stock dividends, and we do not intend to pay any dividends for the foreseeable future. To the extent that we require additional funding currently not provided for in our financing plan, our funding sources may prohibit the payment of any dividends. Because we do not intend to declare dividends, any gain on your investment will need to result from an appreciation in the price of our common shares. There will therefore be fewer ways in which you are able to make a gain on your investment.

FINRA sales practice requirements may limit your ability to buy and sell our common shares, which could depress the price of our shares.

FINRA rules require broker-dealers to have reasonable grounds for believing that an investment is suitable for a customer before recommending that investment to the customer. Prior to recommending speculative low-priced securities to their non-institutional customers, broker-dealers must make reasonable efforts to obtain information about the customer’s financial status, tax status and investment objectives, among other things. Under interpretations of these rules, FINRA believes that there is a high probability such

speculative low-priced securities will not be suitable for at least some customers. Thus, FINRA requirements may make it more difficult for broker-dealers to recommend that their customers buy our common shares, which may limit your ability to buy and sell our shares, have an adverse effect on the market for our shares and, thereby, depress their market prices.

Volatility in our common shares price may subject us to securities litigation.

The market for our common shares may have, when compared to seasoned issuers, significant price volatility, and we expect that our share price may continue to be more volatile than that of a seasoned issuer for the indefinite future. In the past, plaintiffs have often initiated securities class action litigation against a company following periods of volatility in the market price of its securities. We may, in the future, be the target of similar litigation. Securities litigation could result in substantial costs and liabilities and could divert management’s attention and resources.

We have broad discretion in the use of the net proceeds from this offering and may not use them effectively.

Our management will have broad discretion in the application of the net proceeds from this offering, including for any of the purposes described in the section entitled “Use of Proceeds.”   You will not have the opportunity as part of your investment decision to assess whether the net proceeds from this offering are being used appropriately. Because of the number and variability of factors that will determine our use of the net proceeds from this offering, their ultimate use may vary substantially from their currently intended use. The failure by our management to apply these funds effectively could harm our business.

We are a foreign private issuer within the meaning of the rules under the Exchange Act, and as such we are exempt from certain provisions applicable to United States domestic public companies.

We are a foreign private issuer within the meaning of the rules under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). As such, we are exempt from certain provisions applicable to United States domestic public companies. For example:

Our shareholders may not have access to certain information they may deem important and are accustomed to receiving from U.S. reporting companies.

As an “emerging growth company” under applicable law, we will be subject to lessened disclosure requirements. Such reduced disclosure may make our common shares less attractive to investors.

For as long as we remain an “emerging growth company”, as defined in the Jumpstart Our Business Startups Act of 2012 (the “JOBS Act”), we will elect to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies”, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports, and exemptions from the requirements of holding a non-binding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. Because of these lessened regulatory requirements,

our shareholders would be left without information or rights available to shareholders of more mature companies. If some investors find our common shares less attractive as a result, there may be a less active trading market for such securities and their market prices may be more volatile.

We incur significant costs as a result of being a public company, which costs will grow after we cease to qualify as an “emerging growth company.”

We incur significant legal, accounting and other expenses as a public company that we did not incur as a private company. The Sarbanes-Oxley Act, as well as rules subsequently implemented by the SEC and the Nasdaq Capital Market, impose various requirements on the corporate governance practices of public companies. We are an “emerging growth company,” as defined in the JOBS Act and will remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a) following the end of the fiscal year in which the fifth anniversary of this offering occurs, (b) in which we have total annual gross revenue of at least US$1.07 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our common shares that is held by non-affiliates exceeds US$700 million as of the prior February 28^th, and (2) the date on which we have issued more than US$1.0 billion in non-convertible debt during the prior three-year period. An emerging growth company may take advantage of specified reduced reporting and other requirements that are otherwise applicable generally to public companies. These provisions include exemption from the auditor attestation requirement under Section 404 in the assessment of the emerging growth company’s internal control over financial reporting and permission to delay adopting new or revised accounting standards until such time as those standards apply to private companies.

Compliance with these rules and regulations increases our legal and financial compliance costs and makes some corporate activities more time-consuming and costly. After we are no longer an emerging growth company, we expect to incur significant expenses and devote substantial management effort toward ensuring compliance with the requirements of Section 404 and the other rules and regulations of the SEC. For example, as a public company, we have been required to increase the number of independent directors and adopt policies regarding internal controls and disclosure controls and procedures. We have incurred additional costs in obtaining director and officer liability insurance. In addition, we incur additional costs associated with our public company reporting requirements. It may also be more difficult for us to find qualified persons to serve on our board of directors or as executive officers. We are currently evaluating and monitoring developments with respect to these rules and regulations, and we cannot predict or estimate with any degree of certainty the amount of additional costs we may incur or the timing of such costs.

If we are, or were to become, a passive foreign investment company (a “PFIC”) for U.S. federal income tax purposes, U.S. investors in our common shares would be subject to certain adverse U.S. federal income tax consequences.

In general, a non-U.S. corporation will be a PFIC for any taxable year if (i) 75% or more of its gross income consists of passive income or (ii) 50% or more of the average quarterly value of its assets consists of assets that produce, or are held for the production of, passive income. We do not expect to be a PFIC for our current taxable year or in the foreseeable future. However, there can be no assurance that we will not be considered a PFIC for any taxable year. If we were a PFIC for any taxable year during which a U.S. investor held common shares, such investor would be subject to certain adverse U.S. federal income tax consequences, such as ineligibility for any preferred tax rates on capital gains or on actual or deemed dividends, an additional interest charge on certain taxes treated as deferred, and additional reporting requirements under U.S. federal income tax laws and regulations. If we are characterized as a PFIC, a U.S. investor may be able to make a “mark-to-market” election with respect to our common shares that would alleviate some of the adverse consequences of PFIC status. Although U.S. tax rules also permit a U.S. investor to make a “qualified electing fund” election with respect to the shares of a non-U.S. corporation that is a PFIC if the non-U.S. corporation provides certain information to its investors, we do not currently intend to provide the information that would be necessary for a U.S. investor to make a valid “qualified electing fund” election with respect to our common shares.

​

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This prospectus contains statements that constitute “forward-looking statements”. Any statements that are not statements of historical facts may be deemed to be forward-looking statements. These statements appear in a number of different places in this prospectus and, in some cases, can be identified by words such as “anticipates”, “estimates”, “projects”, “expects”, “contemplates”, “intends”, “believes”, “plans”, “may”, “will”, or their negatives or other comparable words, although not all forward-looking statements contain these identifying words. Forward-looking statements in this prospectus may include, but are not limited to, statements and/or information related to: strategy, future operations, projected production capacity, projected sales or rentals, projected costs, expectations regarding demand and acceptance of our products, availability of material components, trends in the market in which we operate, plans and objectives of management.

We believe that we have based our forward-looking statements on reasonable assumptions, estimates, analysis and opinions made in light of our experience and our perception of trends, current conditions and expected developments, as well as other factors that we believe to be relevant and reasonable in the circumstances at the date that such statements are made, but which may prove to be incorrect. Although management believes that the assumption and expectations reflected in such forward-looking statements are reasonable, we may have made misjudgments in preparing such forward-looking statements. Assumptions have been made regarding, among other things: our expected production capacity; labor costs and material costs, no material variations in the current regulatory environment and our ability to obtain financing as and when required and on reasonable terms. Readers are cautioned that the foregoing list is not exhaustive of all factors and assumptions which may have been used.

The forward-looking statements, including the statements contained in the sections entitled Risk Factors, Description of Business and Management’s Discussion and Analysis of Financial Conditions and Results of Operations and elsewhere in this prospectus, are subject to known and unknown risks, uncertainties and other factors that may cause actual results to be materially different from those expressed or implied by such forward-looking statements.

Although management has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements, there may be other factors that cause results not to be as anticipated, estimated or intended. Forward-looking statements might not prove to be accurate, as actual results and future events could differ materially from those anticipated in such forward-looking statements or we may have mad misjudgments in the course of preparing the forward-looking statements. Accordingly, readers should not place undue reliance on forward-looking statements. We wish to advise you that these cautionary remarks expressly qualify, in their entirety, all forward-looking statements attributable to our company or persons acting on our company’s behalf. We do not undertake to update any forward-looking statements to reflect actual results, changes in assumptions or changes in other factors affecting such statements, except as, and to the extent required by, applicable securities laws. You should carefully review the cautionary statements and risk factors contained in this prospectus and other documents that we may file from time to time with the securities regulators.

​

IMPLICATIONS OF BEING A FOREIGN PRIVATE ISSUER

We are considered a foreign private issuer. In our capacity as a foreign private issuer, we are exempt from certain rules under the Exchange Act that impose certain disclosure obligations and procedural requirements for proxy solicitations under Section 14 of the Exchange Act. In addition, our officers, directors and principal shareholders are exempt from the reporting and "short-swing" profit recovery provisions of Section 16 of the Exchange Act and the rules under the Exchange Act with respect to their purchases and sales of our securities. Moreover, we are not required to file periodic reports and financial statements with the SEC as frequently or as promptly as U.S. companies whose securities are registered under the Exchange Act. In addition, we are not required to comply with Regulation FD, which restricts the selective disclosure of material information.

We may take advantage of these exemptions until such time as we are no longer a foreign private issuer. We would cease to be a foreign private issuer at such time as more than 50% of our outstanding voting securities are held by U.S. residents and any of the following three circumstances applies: (1) the majority of our executive officers or directors are U.S. citizens or residents, (2) more than 50% of our assets are located in the United States or (3) our business is administered principally in the United States.

We have taken advantage of certain reduced reporting and other requirements in this prospectus. Accordingly, the information contained herein may be different than the information you receive from other public companies in which you hold equity securities.

​

IMPLICATIONS OF BEING AN EMERGING GROWTH COMPANY

The U.S. Congress passed the JOBS Act, which provides for certain exemptions from various reporting requirements applicable to reporting companies under the Exchange Act, that qualify as “emerging growth companies.” We are an “emerging growth company” and we will continue to qualify as an “emerging growth company” until the earliest to occur of: (a) the last day of the fiscal year during which we have total annual gross revenues of US$1.07 billion (as such amount is indexed for inflation every five years by the SEC) or more; (b) the last day of our fiscal year following the fifth anniversary of the date of the first sale of our common equity securities pursuant to an effective registration statement under the Securities Act; (c) the date on which we have, during the previous three-year period, issued more than US$1.0 billion in non-convertible debt; or (d) the date on which we are deemed to be a “large accelerated filer”, as defined in Exchange Act Rule 12b–2. Therefore, we expect to continue to be an emerging growth company until May 31, 2026.

An emerging growth company may take advantage of specified reduced reporting and other burdens that are otherwise applicable generally to public companies. These provisions include:

We may take advantage of these provisions for up to five years or such earlier time that we are no longer an emerging growth company. We would cease to be an emerging growth company if we have more than US$1.07 billion in annual revenue, have more than US$700 million in market value of our common shares held by non-affiliates or issue more than US$1 billion of non-convertible debt over a three-year period.

​

USE OF PROCEEDS

Upon the sale of US$15,000,000 of our common shares in this offering, after deducting the underwriting discounts and commissions and offering expenses payable by us and assuming no exercise of the underwriter’s over-allotment option, we expect to receive net proceeds of approximately US$13,623,000 from this offering. If the underwriter exercises its over-allotment option in full, our net proceeds will be approximately US$15,509,000.

We intend to use the net proceeds of this offering (assuming no exercise of the over-allotment option) for order fulfilment. Any funds that are not used for order fulfilment, we intend to use for general and administrative purposes.

Pending our use of the net proceeds from this offering, we may invest the net proceeds in a variety of capital preservation investments, including short-term, investment grade, interest bearing instruments and U.S. government securities.

​

DIVIDEND POLICY

To date, we have not paid any dividends on our outstanding common shares. The future payment of dividends will depend upon our financial requirements to fund further growth, our financial condition and other factors which our Board of Directors may consider in the circumstances. We do not contemplate paying any dividends in the immediate or foreseeable futures.

​

BUSINESS OVERVIEW

General

We are in the business of designing and manufacturing electric outboard powertrain systems, power boats and related technology and the renting of electric boats. We believe that our electric outboard powertrain systems are significantly more efficient and powerful than those currently being offered in the market today. In particular, we have recorded powertrain efficiencies of more than 96%, well above the 54% efficiency that we recorded for our principal competitor’s product. Increases in powertrain efficiency allow for more power and range, both of which are highly desirable characteristics for consumers in the marketplace. Although our primary focus is on electric outboard powertrain technology, we will continue to design, manufacture and sell our high-performance, fully-electric boats to commercial and retail customers. According to Allied Market Research, the global electric boat market will reach US$16.6 billion in 2031 up significantly from US$5 billion in 2021, growing at a compound annual growth rate of 12.9% from 2022 to 2031.

We have developed our first fully-electric outboard powertrain system that combines an advanced battery pack, inverter, high-efficiency motor with proprietary union assembly between the transmission and the electric motor design and extensive control software. Our technologies used in this powertrain system are designed to improve the efficiency of the outboard powertrain and, as a result, increase range and performance. We believe our approach in marketing and selling our powertrain technology to boat designers and manufacturers will enable us to leverage their distribution and servicing systems with minimal capital outlay. We expect our core intellectual property contained within our outboard electric powertrain systems to form the foundation for our future growth and for such systems to represent the majority of our revenue.

We continue to manufacture hand-crafted, highly durable, low maintenance, environmentally-friendly electric recreational powerboats. In our last two fiscal years 2023 and 2022, we manufactured 46 and 58 powerboats, respectively. We sell powerboats to retail customers and operators of rental fleets of powerboats through which we seek to build brand awareness. We intend to continue to build brand awareness by partnering with marina operators to offer rental fleets of electric boats. We conduct our transactions directly to customers through our website or through a network of marinas, distributors and show rooms.

In an effort to improve air quality and protect local water habitats, cities and local municipalities are beginning to ban or restrict the use of gasoline- and diesel-powered boats from local waterways, lakes and rivers. For example, Teal Lake in Michigan, USA, bans the standard use of powerboat motors fueled by gasoline or diesel. This trend is beginning to take hold in other parts of the United States, including Washington state, which has provided clear examples of the harm that gasoline products cause on local waterways, and New Hampshire, where the Department of Safety has published restrictions on the use of gasoline and diesel-powered boats across its state.

In our fiscal year 2021, we expanded our business to include rentals of electric powerboats by acquiring EBR, an entity that rents electric boats at two marinas in California. In addition to generating revenues from the rental of our powerboats, EBR builds brand awareness and acts an open-water showroom for potential buyers.

Our electric powertrain is designed to have 180 hp (horsepower) and 236 Lb. ft at 96% load. Furthermore, the electric powertrain system will be liquid cooled as compared to air cooled.

In October 2021, we entered into a Manufacture and Supply Agreement with Linamar Corporation, a provider of manufacturing solutions and a developer of highly engineered products. Under the terms of the agreement, we intend for McLaren Engineering, Linamar’s technology and product development team for its advanced mobility segment, to manufacture and assemble our E-Motion™ technology through testing, parts, tooling development, and designing the union assembly for mass production of our electric powertrain at Linamar’s facility in Canada.

Once we have scaled up the production of our electric powertrain, we intend for the Linamar Corporation to produce our electric powertrain for mass commercialization. Although we believe that we can produce up to 300 electric powertrains per year in our current facilities in addition to producing 150 boats per year, we believe that contracting out the production of the electric powertrains will allow us to dedicate more time and resources to the development of additional electric powertrains.

The production of our electric powertrains will consist of assembling components from third parties, including battery packs, inverters and high-efficiency motors. We intend to use advanced batteries primarily from two suppliers, Octillion and Neogy, but as we are be able to use a wide range of batteries we could use other suppliers. We will source the inverters from UQM (Danfoss Editron) and motors from UQM (Danfoss Editron).

In January 2022, we announced our partnership with Octillion to develop a customized high voltage 32 KW high density battery. Octillion will manufacture a new advanced electric battery system, “Polar 35” to power our E-Motion™ outboard powertrain. The configuration of the battery pack is smaller than that of a typical fuel tank, which in turn makes it easier to custom fit in virtually any boat.

During that same period, we partnered with Nextfour Solutions Ltd. to further develop a customized multifunctional display to be integrated within our E-Motion™ 180 fully electric powertrain system.

In February 2022, we partnered with Weismann Marine, LLC to design and develop a lower unit (or gearcase) assembly. We partnered with Hellcat Powerboats to include our outboard powertrain in the boat that achieved a world record speed of 109 mph for an all-electric boat in 2022.

Our electric powertrains will be controlled by control software developed in house. We have used open-source software code to develop our own battery management system software that will be tailored to regulate the power from the battery pack to the electric motor and its related systems.

We have received governmental support in connection with our development of electric powertrains. In our 2023, 2022 and 2021 fiscal years, we recognized grants and investment tax credits amounting to $232,882, $1,458,632 and $921,658, respectively, of which $144,032, $1,408,840 and $859,516, respectively, is presented against research and development expenses.

In July 2022, we launched a partnership with Group Beneteau to integrate our outboard motors onboard several models across Group Beneteau’s brand portfolio. In August 2023, our outboard powertrain was included in the boat that broke our previously held world record speed for an all-electric boat when it achieved a speed of 116 mph. In October 2023, we announced the delivery of our E-Motion™ Electric Powertrain Technology to Groupe Beneteau, Four Winns to be the inaugural electric motors integrated on the Four Winns H2e Bowrider. Group Beneteau has announced that they intend for its other brands to also use this technology both in North America and Europe. In November 2023, we received an initial purchase order from Wired Pontoon for 25 units of the E-Motion™ 180E outboard and powertrain systems.

Phantom

​

Sales

We envision that if we are able to commercialize and mass produce our electric powertrains, a large majority of our revenue will be generated from the sale of our electric powertrains. Although we have yet to commercialize our electric powertrains, we have received non-binding letters of intent from OEMs for the purchase of such powertrains. Under the LOIs, OEMs have indicated their interest in purchasing over 1,000 powertrains through the year ended August 31, 2024. Such LOIs are non-binding and may never result in any actual sales. The projected sales price for our first electric outboard powertrain system is $100,000.

In our 2023 and 2022 fiscal years, we generated approximately 29% and 35%, respectively, of our revenue from the sale of our electric powerboats. In our 2023 fiscal year, we sold 46 of our electric powerboats for revenue of $1,612,699, and in our 2022 fiscal year, we sold 58 of our electric powerboats for revenue of $2,557,086. Our sales are to retail customers and operators of rental fleets of powerboats.

Sales of New Powerboats to Retail Purchasers

We sell our powerboats to retail purchasers. In our 2023 and 2022 fiscal years, we sold 14 and 21 powerboats to retail customers, respectively, which was approximately 30% and 36%, respectively, of all sales in those periods.

Sales of Fleets of New Powerboats

We sell our powerboats to persons and entities operating fleets of rental boats. In our 2023 and 2022 fiscal years, we sold 7 and 17 powerboats to rental fleet operators, respectively, which was approximately 15% and 29% of all of our sales, respectively, in such periods. We intend to continue to build brand awareness by partnering with marina operators to offer rental fleets of electric boats.

In October 2022, we announced a partnership with Nautical Ventures Group (“Nautical”), whereby Nautical will be the sole and exclusive distributor of the Phantom in the United States. The non-binding memorandum of understanding with Nautical includes Nautical’s agreement to purchase a minimum of 50 Phantom boats.

Rentals

In our fiscal year 2021, we expanded our business to include rentals of electric powerboats by acquiring EBR, an entity that rents electric boats at the Lido Marina Village in Newport, California. We acquired this business for approximately $9,020,000, of which $5,546,000 was paid in cash and $3,474,000 of which was paid in the form of 284,495 common shares. At the time of the acquisition, our Chief Executive Officer was an affiliate of EBR.

On April 1, 2023, we opened our second electric boat rental operation in Portside Ventura, California, located at 1196 Portside Drive Ventura. The new rental operations serve multiple purposes, including testing, validating, and training for west coast boat manufacturers. We plan to use the facility to evaluate and provide training on our fully electric E-Motion™ 180E propulsion system and outboard technology.

EBR has a fleet of approximately 30 powerboats. Rental rates range from US$75 per hour to US$215 per hour, plus a booking fee, with a minimum booking of two hours. Once a powerboat in the EBR fleet has over 200 hours of sailing time, EBR offers the powerboat for sale to the public. In our 2023 and 2022 fiscal years, our rental business generated approximately $4,038,803 and $4,794,000 of revenue, respectively, the majority of which was from the rental of our powerboats.

Investment in Electric Boat Manufacturer

On May 14, 2021, we purchased $3,400,000 in Debentures from Limestone. Limestone is a North American designer and manufacturer of recreational and commercial powerboats. The Debentures bear interest at the rate of 10% per annum and mature in three years from issuance. We entered into an agreement pursuant to which Limestone agreed to purchase 25 powertrains from us, subject to the completion of satisfactory testing from Limestone, of which it has currently purchased nil. One of our directors is also a director of Limestone. On January 20, 2023, Limestone announced that its wholly-owned subsidiaries have filed for voluntary petitions for relief under Chapter 7 of the Bankruptcy Code of the U.S. Bankruptcy Court for the Middle District of Tennessee. As a result, we had significant doubts about recouping our investment in Limestone pursuant to the terms of the Debentures and entered into an agreement with Limestone on July 18, 2023 whereby we acquired common shares of Limestone, representing approximately 7% of their then outstanding shares, in exchange for the retirement of the Debentures. Prior to the conversion, the Company had recorded an impairment on the entire value of the Debentures at the amount of nil and $2,637,000 in the years ended August 31, 2022 and 2023, respectively.

Suppliers

Although we manufacture all of our powerboats, we do so by assembling the component parts that we acquire from third-party suppliers rather than by producing any of those component parts ourselves. Some of these parts and components are manufactured to our specifications (such as hulls and motors) while others are bought “off the shelf” (such as batteries and canopies). We do not maintain long-term contracts with preferred suppliers, but instead rely on informal arrangements and off-the-shelf purchases. We materially depend on some of those third-party suppliers for certain components that we obtain from a limited number of suppliers.

We have not experienced any material shortages in any of our product parts or components, but as a result of the COVID-19 pandemic some of our third-party suppliers experienced delays, and are continuing to experience delays, in delivering our product parts and components in a timely manner and fluctuations in price for these supplies is a possibility if raw material pricing increases. Temporary shortages, when they do occur, usually involve manufacturers of these products adjusting model mix, introducing new product lines, or limiting production in response to an industry-wide reduction in boat demand, or, as recently experienced during the COVID-19 pandemic, in finding persons able to deliver the parts and components in a timely manner.

Electric Powertrains

The most significant parts and components we intend to use in manufacturing our electric powertrains are:

Powerboats

The most significant parts and components used in manufacturing our boats are:

As we do not produce any of the parts of components of our electric powertrains or electric powerboats, we do not materially use, or intend to use, any raw materials in their production. The manufacturers of the parts and components that we use, however, do use raw materials, including resins, fiberglass, hydrocarbon feedstocks, steel and various minerals, especially in the production of the engines and batteries that we use. We do not control how these third parties source the raw materials that they use, and we may suffer production delays if such third parties do not have access to all of the raw materials that they need or source conflict minerals in violation of applicable regulations.

Patents and Licenses

We do not currently have any patents or any patent applications pending, and we do not rely on any licenses from third parties at this time.

Our success depends, at least in part, on our ability to protect our core technology and intellectual property. To accomplish this, we intend to rely on a combination of patent and design applications, trade secrets, including know-how, employee and third-party non-disclosure agreements, copyright laws, trademarks and other contractual rights to establish and protect our proprietary rights in our technology. We intend to file patent applications with respect to components of a powertrain that we are developing. We do not know whether any of our patent applications will result in the issuance of patents or whether the examination process will require us to narrow our claims. Even if granted, these pending patent applications might not provide us with adequate protection.

Trademarks

We filed trademark applications with the Canadian Intellectual Property Office and the U.S. Patent and Trademark Office for our logo and the brand name “E-Motion”. We operate under the trade name “VISION MARINE TECHNOLOGIES”, but neither this name nor any of the names of the models of our boats are currently registered trademarks.

This prospectus contains references to trademarks and service marks belonging to other entities. Solely for convenience, trademarks and trade names referred to in this prospectus may appear without the ® or TM symbols, but such references are not intended to indicate, in any way, that we will not assert, to the fullest extent possible under applicable law, our rights to these trademarks and trade names. We do not intend our use or display of other companies’ trade names, trademarks or service marks to imply a relationship with, or endorsement or sponsorship of us by, any other companies.

Industry Overview

In North America, 75 million people go boating every year, according to the U.S. Coast Guard, with approximately 11.8 million recreational vessels registered with the U.S. Coast Guard in 2020. The worldwide recreational boating market size was approximately US$35 billion in 2020 and is set to surpass US$60 billion by 2027, according to a research report by Global Market Insights, Inc. Within the boating market, there is an outboard motor market and an electric boat market. Our products fall into each of those categories, and if produced, our electric powertrains will be used in boats in both those markets.

Outboard Motor Market

An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the boat. As well as providing propulsion, outboards provide steering control, as they are designed to pivot over their mountings and thus control the direction of thrust. Outboard motors tend to be found on smaller watercraft as it is more efficient for larger boats to have an inboard system. Although outboard engines powered by fossil fuels have traditionally dominated this market and continue to do so, electric outboard motors are a relatively new phenomenon that have been growing in step with the growth in the electric boat market.

According to the NMMA, after reaching record highs in 2022, sales of outboard engines in the United States (which includes outboard motors) surpassed US$10.5 billion and is expected to grow by 5% (CAGR) by 2032. Consumer demand for higher-performance engines continued to trend upward in 2020, with double digit gains in sales for engines with 200 and greater horsepower. Engines with between 200 and 300 horsepower accounted for 27% of all sales of outboard engines.

Although many recreational boats can be powered by outboard or inboard motors, many consumers prefer outboard motors. Among the reasons for their preference are that, unlike inboard motors, outboard motors can be easily removed for storage or repairs, they provide more room in the boat as they are attached to the transom outside of the boat, they tend to have a shallower draft and they can be more easily replaced in the event the motor no longer works or a desire to upgrade to a higher horsepower.

There are many manufacturers of outboard motors. Some of these manufacturers are subsidiaries of massive global conglomerates, like Yamaha, Bombardier and Suzuki, that have more resources and experience in the market than we do. Others are relatively new startups, like us, that may be more nimble and adaptive to changes in the outboard motor market than we will be. We deem our biggest competitor in the electric outboard motor market to be Torqeedo.

Electric Boat Market

Although electric boats have been available for over 100 years, interest in them was minimal until the 1990s when the first studies were conducted in the United States following the suspicion that motorboats contaminate aquatic environments significantly through loss of gasoline and lubrication oil. According to Andre Mele, recreational boats pollute as much as cars and trucks in the United States. In the early 2000’s, 8 million speedboats in the United States released 15 times more pollutants annually into the environment than the oil spill produced by the oil tanker Exxon Valdez in 1989. The sinking of this tanker in Alaska had released 11 million U.S. gallons of hydrocarbons into the environment. After conversion, this means that each boat releases an average of 78 L of hydrocarbons into aquatic environments each year. If that average is still current, we estimate that in 2019 oil losses in the environment via motorboats equaled 150,000 tons of hydrocarbon scaly leaks in Canada (based on 2 million vessels), 750,000 tons of hydrocarbon scaly leaks in the United States (based on 10 million vessels) and 450,000 tons of hydrocarbon scaly leaks in Europe (based on 6 million vessels).

This explains why some lakes and bodies of water have recently banned motorboats. The total elimination of gasoline immediately eliminates a large source of marine pollution, with immediate results: possibility of beaches, swimming and reduction of BOD (biochemical oxygen demand) and DCO (direct chemical oxidation) of ambient water. Specifically, hydrocarbons, similar to the dirt that clings to the walls of a bathtub, contaminate the shores and banks of lakes, rivers and bodies of water, where the development of many living organisms takes place. The ecosystem is then modified with the scarcity or disappearance of certain species.

In an effort to tackle air pollution, cities around the world are beginning to ban all gasoline - and diesel-powered boats from the center of the city. One of the first cities to implement this change is Amsterdam, Netherlands. This movement to electrically powered boats has been implemented in Venice, where the city has restricted the movement of gasoline - and diesel-powered boats, while exempting electrically powered boats.

Interest in electric boats has also been driven by decreases in their cost largely as a result of a decrease in the price of the batteries used to power them. The average price per kilowatt hour of a lithium-ion battery fell from approximately US$1,200 in 2010 to below US$138 in 2020.

The electric boat market is competitive in nature with much of that competition of late focusing on launching new E-boats that have longer range and higher speed than currently available boats. The global electric engine market is set to garner US$15.5 billion by 2032 Research and Markets predicts that the growth in the electric boat market will be caused by:

The electric boat market is segmented into two categories, hybrid and pure electric boats. In 2018, hybrid electric boats represented approximately 70% of the electric boat market. The NMMA anticipates that the market shares of the pure electric boat segment will meaningfully increase during the period from 2019 to 2027 owing to advancements in battery technology. On the basis of passenger capacity, electric boats with a capacity of less than 10 passengers captured the highest share of the global electric boat market in 2018.

Additionally, the same segment is the fastest-growing segment pertaining to high demand for small boats for recreational purposes from high-income earners in the United States, Canada and Western European.

Government Support

Although the recreational powerboat industry does not generally receive much direct governmental support, we have received tax credits from, and grants provided by, the Quebec provincial government and the Canadian federal government primarily in connection with our development and promotion of green technology. In our 2023 and 2022 fiscal years, we recognized grants and investment tax credits amounting to $232,882 and $1,458,632, respectively, of which $144,032 and $1,408,840, respectively, is presented against research and development expenses. Although we do not consider the receipt of such credits and grants as essential to our operations, if they were no longer available, our business, prospects, financial condition and operating results could be adversely affected.

Competitive Advantages & Operational Strengths

We face competition from manufacturers of:

We intend to sell our electric powertrains to OEMs for use in their boats. We are currently aware of one company (Torqeedo) that produces electric powertrains for OEMs, and as a result we believe that there is a viable and meaningful market opportunity in this market for us. Although, we believe that our electric powertrain systems are more efficient and powerful than current offerings on the market, our competitors, including Torqeedo, may have greater resources than we do and OEMs may find their designs or price to be more attractive than ours. Even if we produce electric powertrains and sell them to OEMs, other competitors may enter the field or the OEMs may decide to produce their own powertrains and cease purchasing ours.

The recreational powerboat industry is highly competitive for consumers and dealers. Competition affects our ability to succeed in the markets we currently serve and new markets that we may enter in the future. Some potential purchasers of powerboats may not have a preference as to whether they will purchase electric powerboats or fossil fuel powered ones. To that end, we compete with several large manufacturers, such as Brunswick Corporation, MasterCraft Boat Holdings, Inc. and Correct Craft, that produce fossil fuel powerboats and have greater financial, marketing and other resources than we do. To the extent that OEMs incorporate our electric powertrains into their boats, those boats will also compete with traditional fossil fuel powerboats. We compete with large manufacturers who are represented by dealers in the markets in which we now operate and into which we plan to expand. We also compete with a wide variety of small, independent manufacturers. Competition in our industry is based primarily on brand name, price and product performance.

The electric recreational powerboat market is evolving and companies within it must be able to adapt without jeopardizing the timing, quality or quantity of their products. We deem our principal competitors within this market to be Duffy Electric Boat Company, Elctracraft, Pender Harbour, Elco Motor Yachts Company (formerly known as Launch Electric Company), Budsin Wood Craft, Ruban Bleu Electric Boats, Frauscher Boats and Boote Marian GmbH. In addition to the matters mentioned above, we compete with other manufacturers of recreational electric boats on technological developments (such as powertrain efficiency, life of batteries and battery use per charge) and partnerships with battery and motor suppliers. As electric boat technology improves, we anticipate that more manufacturers will market competing products. As they do, we expect that we will experience significant competition.

We believe the primary competitive factors in our market include but are not limited to:

Most of our current and potential competitors have significantly greater financial, technical, manufacturing, marketing and other resources than we do and may be able to devote greater resources to the design, development, manufacturing, distribution, promotion, sale and support of their products. Most of our competitors have more extensive customer bases and broader customer and industry relationships than we do. In addition, many of these companies have longer operating histories and greater name recognition than we do. Our competitors may be in a stronger position to respond quickly to new technologies and may be able to design, develop, market and sell their products more effectively.

Furthermore, certain large manufacturers offer financing options on their powerboats and also have the ability to market powerboats at a substantial discount, provided that the boats are financed through their affiliated financing company. We do not currently offer any form of direct financing on our boats. The lack of direct financing options and the absence of customary boat discounts could put us at a competitive disadvantage.

We might not be able to compete successfully in our market. If our competitors introduce new powertrains, powerboats or services that compete with or surpass the quality, price or performance of our powertrains, powerboats or services, we may be unable to satisfy existing customers or attract new customers at the prices and levels that would allow us to generate attractive rates of return on our investment. Increased competition could result in price reductions and revenue shortfalls, loss of customers and loss of market share, which could harm our business, prospects, financial condition and operating results.

We believe that our experience, production capability, product offering and management give us the ability to successfully operate in the recreational electric powerboat market in a way that our competitors cannot. In particular, we believe that we have a number of competitive advantages, including:

Strategy

As a designer, manufacturer, and marketer of premium electric boats and electric powertrain systems, we strive to design new and innovative products that appeal to a broad customer base. Since fiscal 2014, we have successfully launched a number of new products and features with best-in-class quality leading to increased sales and significant margin expansion. Furthermore, our unique product

development process enables us to offer products with innovative offerings that we believe will be difficult for our competitors to match without significant additional capital investments, most notably our outboard electric powertrain system.

We are developing innovative electric outboard powertrain systems designed to enable us to capture market share, as the outboard powertrain industry moves to electric powertrain outboard motors to comply with local green initiatives. The NMMA estimates that after reaching record highs in 2020, outboard engine sales in the U.S had a single digit decline in 2021, down 6.6 percent to 307,800 units. Despite the drop from 2020, sales in 2021 were the second highest total in the last 14 years, and 29% above average retail unit sales from 2008–2021. Total retail orders of outboard engines were US$2.9 billion in 2018, and Blueweave Research estimates that global electric boat market will reach US$18 billion by 2026.

We sell our electric boats to retail customers as well as to boat clubs and boat rental operations. We intend to continue to build brand awareness by partnering with marina operators to offer rental fleets of electric boats. We plan to further expand our sales by offering our products via third-party dealerships and by attending more tradeshows. As we launch our innovative electric outboard powertrain systems, we will directly market to OEMs of boats, thereby leveraging their support and distribution systems. We will market our electric powertrains to the OEMs by attending trade shows, inviting the OEMs to test the electric outboard powertrains on a prototype boat, introducing the electric powertrain using social media avenues and advertising the electric powertrain systems in trade journals.

We will continue to implement a number of initiatives to reduce our cost base and to improve the efficiency of our manufacturing process. Additionally, we have fostered a culture of operational improvement within our workforce, which will lead to further operational efficiencies. Finally, we intend to invest in further research and development to ensure that we develop innovative electric powertrain systems thus expanding the number of OEMs that will use our products.

We intend to increase our international sales and expand our network of international distributors and dealers.

Manufacturing

We produce our electric recreational powerboats and related components at our 15,000 square foot assembly warehouse in Quebec and intend to use Linamar as our production partner for our E-Motion powertrains. In our last two fiscal years, 2023 and 2022, we manufactured 46 and 58 powerboats. We run one assembly line and have a production capacity that allows us to produce up to seven boats a week depending on the type of boats and the specifications of each order.

Marketing

As we intend to sell our electric powertrains to a handful of OEMs, we will market the powertrains to them in a direct and focused manner. This will entail visits to the OEMs and visits from the OEMs at our production facility as well as general exposure of our powertrains at trade shows and in trade journals.

We primarily use our website and social media to sell our boats. We support this effort by attendance at trades shows (boat shows) that expose our products to the boat buying public and to industry specialists. We intend to continue to expand our social media presence and attend more trade shows in North America and internationally. We also rely on a network of distributors and dealers, and their marketing efforts, for the sale of our boats and seek to grow this network. We do not currently have a coordinated marketing effort with our network of distributors and dealers.

Sales and Service Model

As we do not have a direct relationship with the purchasers of the boats that incorporate our electric powertrains, we do not intend to service such purchasers directly if there is a problem with the powertrain. Rather, the OEMs of the boats incorporating the powertrains will service such purchasers, and we will provide OEMs instruction on their repair and provide training to OEM personnel at our facilities on a periodic basis, so that the OEMs can provide maintenance, repair and customer support to their customers. As we introduce new electric powertrain systems, we will continue to provide training to OEM personnel.

Sales Model

We sell directly to the customer via online, social media marketing and attendance at boat shows. We also sell our boats through a limited number of dealers and distributors. We will further expand our product offerings to third-party dealerships and by selling directly to OEMs.

Service Model

We do not offer direct servicing of our boats and do not offer a warranty for our boats. Purchasers of our boats are able to rely on the warranties provided by the manufacturers of the parts used in our boats, including the motors, the batteries and certain other components.

Government Regulation

Our operations are subject to extensive and frequently changing federal, state, provincial, local and foreign laws and regulations, including those concerning product safety, environmental protection and occupational health and safety. We believe that our operations and products are in compliance with these regulatory requirements. Historically, the cost of achieving and maintaining compliance with applicable laws and regulations has not been material. However, future costs and expenses required for us to comply with such laws and regulations, including any new or modified regulatory requirements, or an inability to address newly discovered environmental conditions could have a material adverse effect on our business, financial condition, operating results, or cash flows.

The regulatory programs that impact our business include the following:

Regulations on Hazardous Materials

Certain materials used in our manufacturing, including the resins used in production of our boats, are toxic, flammable, corrosive, or reactive and are classified by the federal, state and provincial governments as “hazardous materials.” Control of these substances is regulated by the Environmental Protection Agency (EPA) and state pollution control agencies under the Federal Resource Conservation and Recovery Act, and related state programs in the United States, and by Environment and Climate Change Canada and Health Canada and provincial pollution control agencies under the Canadian Environmental Protection Act, 1999 (“CEPA”) and related provincial legislation in Canada. Storage of these materials must be maintained in appropriately labeled and monitored containers, and disposal of wastes requires completion of detailed waste manifests and recordkeeping requirements. Any failure by us to properly store or dispose of our hazardous materials could result in liability, including fines, penalties, or obligations to investigate and remediate any contamination originating from our operations.

The United States Clean Air Act and the Canadian Environmental Protection Act

The United States Clean Air Act (the “CAA”) and CEPA and corresponding state and provincial rules regulate emissions of air pollutants. Because our manufacturing operations involve molding and coating of fiberglass materials, which involves the emission of certain volatile organic compounds, hazardous air pollutants, and particulate matter, we are required to comply with Canadian federal and provincial environmental protection regulations. The hulls used in our products are all manufactured by third parties. The additional cost of complying with these regulations has increased our cost to purchase hulls and, accordingly, has increased the cost to manufacture our products.

In addition to the regulation of our manufacturing operations, the EPA has adopted regulations stipulating that many marine propulsion engines meet certain air emission standards. The engines used in our products, all of which are manufactured by third parties, are warranted by the manufacturers to be in compliance with the EPA’s emission standards. Furthermore, the engines used in our products must comply with the applicable emission standards under the CEPA and corresponding provincial legislation. The additional cost of complying with these regulations has increased our cost to purchase the engines and, accordingly, has increased the cost to manufacture our products.

If we are not able to pass these additional costs along to our customers, it may have a negative impact on our business and financial condition.

Boat Manufacturing Standards

As a manufacturer of small vessels established in Canada, we are required to ensure that:

Boat Safety Standards

Our powerboats must be manufactured to meet the standards of certification in the jurisdictions in which they are used or to which they are imported. This means that our powerboats must meet the standards of certification required by the U.S. Coast Guard and the Canadian Coast Guard in Canada and they must be certified to meet the European Union’s imported manufactured products standards in the European Union. These certifications specify standards for the design and construction of powerboats. We believe that all our boats meet these standards. In addition to those standards, we believe that our powerboats meet the safety standards set by the ABYC, a non-profit, member organization that develops voluntary safety standards for the design, construction, maintenance, and repair of recreational powerboats.

Safety of recreational boats in the United States is subject to federal regulation under the Boat Safety Act of 1971, which requires boat manufacturers to recall products for replacement of parts or components that have demonstrated defects affecting safety. Any recall of our boats or components in our boats could result in large expenditures and tarnish our brand.

Labor regulations

The Act respecting occupational health and safety (Quebec) and the regulations made thereunder impose standards of conduct for and regulate workplace safety, including limits on the amount of emissions to which an employee may be exposed without the need for respiratory protection or upgraded plant ventilation. Our facilities are subject to inspection by Canadian, Quebec and local agencies and departments. We believe that our facilities comply in all material aspects with these regulations. We have made a considerable investment in safety awareness programs and provide ongoing safety training for all of our employees.

Research and Development

Among other factors, our boats are distinguished from their competitors as a result of design and technological features. We invest in research and development to develop and improve these features so that we may innovate future product offerings in boat and electric powertrain systems. For example, our Volt 180 was developed in conjunction with a Canadian government grant.

Seasonality

Our current operating results are subject to annual and seasonal fluctuations resulting from a variety of factors, including:

We do not envision the sales of our electric powertrains to OEMs will be seasonal. As building a boat is a time-consuming process, we expect that OEMs will build their boats and increase their inventory even in those seasons where sales are generally lower in preparation for the seasons of higher sales.

Legal Proceedings

We are not involved in, or aware of, any legal or administrative proceedings contemplated or threatened by any governmental authority or any other party. As of the date of this prospectus, no director, officer or affiliate is a party adverse to us in any legal proceeding or has an adverse interest to us in any legal proceeding.

Employees

As of November 24, 2023, we employed a total of 38 people full-time and 8 part-time. All of our employees were employed at our principal executive offices in Boisbriand, Québec and Newport, California. None of our employees are covered by a collective bargaining agreement.

The breakdown of full-time employees by main category of activity is as follows:

​

Property, Plant and Equipment

Our manufacturing and office space is located in Boisbriand, Quebec, just outside of Montreal. This space is in three adjacent units each under a separate lease with a related party. One lease is for approximately 4,100 square feet, has a monthly rent of approximately $5,400 and expires on March 31, 2027. The second lease is for approximately 4,100 square feet, has a monthly rent of approximately $5,400 and expires on March 31, 2027. The third lease is for approximately 16,800 square feet, has a monthly rent of approximately $21,700 and expires on March 31, 2027. We consider our office and manufacturing space sufficient to meet our current needs and our needs for at least the next 12 months.

We lease office space and marina space for our rental business at the Lido Marina Village in Newport Beach, California and office, warehousing and storage space in Huntington Beach, California. One lease is for an office space of approximately 232 square feet, has a monthly rent of approximately USD$1,945 and expires on February 1, 2027. We lease marina space of approximately four moorings, for a monthly rent of approximately USD$9,380, which lease expires on March 31, 2027. We also lease office, warehousing and storage space of approximately 4,500 square feet for a monthly rent of approximately USD$6,450, which lease expires on January 31, 2027.

We lease a kiosk and three slips for our rental business at the Ventura Portside Marina in Ventura, California. In exchange for use of the space and common areas in the facility, we pay a monthly rent of approximately USD$3,500. The lease expires in October 2024 and may be renewed at our discretion for an additional two-year period.

On October 1, 2021, we entered into a lease agreement with the developers of Waves at Dania Beach, to rent office space as well as slip space for twenty-five electric boats, for monthly rent of approximately US$10,000, which lease expires on October 1, 2027. Monthly rent is payable upon the completion of Dania Beach.

We do not own any real property and do not lease any other properties.

​

KEY INFORMATION

Selected Historical Financial Data

You should read the following selected financial data together with our historical financial statements and the notes thereto included elsewhere in this prospectus and with the information set forth in the section titled “Management’s Discussion and Analysis of Financial Conditions and Results of Operations”.

Selected Historical Financial Data

The selected historical financial information set forth below has been derived from our audited consolidated financial statements for the fiscal years ended August 31, 2023, 2022 and 2021.

Consolidated Statement of Comprehensive (Loss)

​

Consolidated Statements of Financial Position

​

Outstanding Share Data

Our authorized share capital consists of an unlimited number of common shares without nominal or par value, issuable in four series (“Common Shares”), of which an unlimited number are designated as Voting Common Shares – Series Founder, an unlimited number are designated as Voting Common Shares – Series Investor 1, an unlimited number are designated as Voting Common Shares – Series Investor 2, an unlimited number are designated as Non-Voting Common Shares and an unlimited number are designated as Preferred Shares. As at August 31, 2023, our outstanding equity and convertible securities were as follows:

​

Common Shares

The holders of our Voting Common Shares are entitled to vote at all meetings of shareholders, to receive dividends if, as and when declared by the directors and to participate pro rata in any distribution of property or assets upon our liquidation, winding-up or other dissolution. The holders of our Non-Voting Common Shares are not entitled to vote at meetings of shareholders but are entitled to receive dividends if, as and when, declared by the directors and to participate pro rata in any distribution of property or assets upon our liquidation, winding-up or other dissolution. Our common shares carry no pre-emptive rights, conversion or exchange rights,

redemption, retraction, repurchase, sinking fund or purchase fund provisions. There are no provisions requiring the holders of our common shares to contribute additional capital and no restrictions on the issuance of additional securities by us. There are no restrictions on the repurchase or redemption of common shares by us except to the extent that any such repurchase or redemption would render us insolvent pursuant to the Business Corporations Act.

For additional information regarding our common shares, please see the discussion under the heading entitled “Articles of Incorporation of Our Company - Rights, Preferences and Restrictions Attaching to Our Shares”.

Non-cumulative voting

Holders of our common shares do not have cumulative voting rights, which means that the holders of more than 50% of the outstanding shares, voting for the election of directors, can elect all of the directors to be elected, if they so choose, and, in that event, the holders of the remaining shares will not be able to elect any of our directors.

Preferred Shares

We do not have any preferred shares outstanding as of the date of this prospectus.

Stock transfer agent

Our stock transfer agent for our securities is VStock Transfer, LLC, 18 Lafayette Place, Woodmere, NY 11598, Phone: (212) 828-8436.

Indebtedness as of August 31, 2023:

​

​

​

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITIONS AND RESULTS OF OPERATIONS

This prospectus should be read in conjunction with the accompanying financial statements and related notes. The discussion and analysis of the financial condition and results of operations are based upon the financial statements, which have been prepared in accordance with International Financial Reporting Standards (IFRS), as adopted by the International Accounting Standards Board (IASB).

The preparation of financial statements in conformity with these accounting principles requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent liabilities at the financial statement date and reported amounts of revenue and expenses during the reporting period. On an ongoing basis, we review our estimates and assumptions. The estimates were based on historical experience and other assumptions that we believe to be reasonable under the circumstances. Actual results are likely to differ from those estimates or other forward-looking statements under different assumptions or conditions, but we do not believe such differences will materially affect our financial position or results of operations. Our actual results may differ materially as a result of many factors, including those set forth under the headings entitled “Special Note Regarding Forward-Looking Statements” and “Risk Factors.”

Critical accounting policies, the policies we believe are most important to the presentation of our financial statements and require the most difficult, subjective and complex judgments, are outlined below under the heading “Critical Accounting Policies and Estimates” and have not changed significantly since our founding.

Overview

The Company was incorporated on August 27, 2012, under the laws of the province of Quebec, Canada, and its principal activity is the design, development and manufacturing of electric outboard powertrain systems and electric boats.

Our head office and principal address is located at 730 Boulevard du Cure-Boivin, Boisbriand, Quebec, Canada, V7G 2A7.

Results of Operations

Results of Operations for the Year Ended August 31, 2023 as Compared to the Year Ended August 31, 2022

Revenue for the year ended August 31, 2023 was $5,651,502 (2022: $7,350,946); the decrease of 23% resulted from a decrease in revenue from the Company’s boat and rental operations. The Company’s gross profit decreased to $1,536,426 (2022: $3,285,565) due to reductions in boat sales and rental revenue, additional costs of sales for the construction of boats and the provision on the sale of the E-Motion powertrains. The following provides an analysis of the sale of electric boats and revenue from rental operations:

​

During the year ended August 31, 2023, the Company incurred a net loss of $(20,877,186) compared to a net loss of $(13,111,785) for the corresponding prior period. The increase in comprehensive loss was due to a decrease in revenue and an increase in expenses for the year ended August 31, 2023, increasing to $22,694,487 (2022: $16,139,007). The largest expense items that are included in expenses for the year ended August 31, 2023 were:

Results of Operations for the Year Ended August 31, 2022 as Compared to the Year Ended August 31, 2021

Revenue for the year ended August 31, 2022 was $7,350,946 (2021: $3,513,788); the increase of 109% resulted from the acquisition of 7858078 Canada Inc., the parent of EBR. This resulted in an increase in gross profit to $3,285,565 (2021: $1,604,182). Excluding the revenue from the acquisition, the Company’s segment of sales of electric boats generated revenue of $2,557,085 (2021: $2,150,764); the Company experienced an increase in revenue from boat sales due to the easing of supply chain issues.

​

During the year ended August 31, 2022, we incurred a total comprehensive loss of $(12,802,680) compared to a comprehensive loss of $(14,725,341) for the corresponding prior year period. The decrease in comprehensive loss was due to expenses for the year ended August 31, 2022, decreasing to $16,139,007 (2021: $16,612,499). The largest expense items that are included in expenses for the year ended August 31, 2022 were:

We incurred an increase in income taxes for the year ended August 31, 2022, of $258,343 (2021: $105,590), primarily caused by an increase in current and deferred income taxes related to the acquisition.

Liquidity and Capital Resources

Liquidity

The Company’s operations consist of the designing, developing and manufacturing of electric outboard powertrain systems, rental of electric boats and electric boats sales. The Company’s financial success is dependent upon its ability to market and sell its outboard powertrain systems and electric boats; and to raise sufficient working capital to enable the Company to execute its business plan. The Company’s historical capital needs have been met by internally generated cashflow from operations and the support of its shareholders. During the year ended August 31, 2021, the Company raised gross proceeds of US$27,600,000 from its initial public offering onto the Nasdaq and during the year ended August 31, 2023, the Company raised $12,437,523. However, should the Company need further funding, there is no assurance that equity funding will be possible at the times required by the Company. If no funds can be raised and sales of its outboard powertrain systems and electric boats does not produce sufficient net cash flow, then the Company may require a significant curtailing of operations to ensure its survival.

The consolidated financial statements have been prepared on a going concern basis which assumes that the Company will be able to realize its assets and discharge its liabilities in the normal course of business for the foreseeable future. The Company incurred a loss before tax of $21,158,061 and net loss of $20,877,186 during the year ended August 31, 2023 and has a cash balance and a working capital surplus of $3,359,257 and $3,676,936, respectively, as at August 31, 2023. The Company’s ability to meet its obligations as they fall due and to continue to operate as a going concern is dependent on the continued financial support of the creditors and the shareholders. In the past, the Company has relied on the support of its shareholders to meet its cash requirements. There can be no assurance that funding from this or other sources will be sufficient in the future to continue its operations. Even if the Company is able to obtain new financing, it may not be on commercially reasonable terms or terms that are acceptable to it. Failure to obtain such financing on a timely basis could cause the Company to reduce or terminate its operations.

As of November 20, 2023, the Company had 11,649,319 issued and outstanding shares and 15,761,301 on a fully diluted basis.

The Company had $3,676,936, of working capital surplus as at August 31, 2023 compared to $8,727,011 working capital surplus as at August 31, 2022. The decrease in working capital surplus during the year ended August 31, 2023 resulted from the cash used in

operations of $14,007,923 (2022: $10,996,819); cash used in investing activities of $537,020 (2022: $964,503) resulting from the additions to property and equipment of $938,802 (2022: $1,175,931); which was offset by proceeds from disposal of equipment of $401,782 (2022: $243,630); financing activities provided cash of $12,079,484 (2022: $361,783), caused by the issuance of shares of $12,437,523 (2022: $nil); increase in the Company’s credit facility of $155,000 (2022: $nil) which was offset by the repayment of lease liabilities of $726,893 (2022: $695,749) and the repayment of long term debt of $258,000 (2022: $282,424).

Capital Resources

As at August 31, 2023, the Company had cash of $3,359,257 (August 31, 2022: $5,824,716).

As of the date of this MD&A, the Company has no outstanding commitments, other than rent and lease commitments and purchase commitments as disclosed in Note 15 and 28 of the Company’s consolidated financial statements for the year ended August 31, 2023. The Company has pledged its future accounts receivable and inventory as security for its credit facility.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements. As of August 31, 2023, we did not have any off-balance sheet debt nor did we have any transactions, arrangements, obligations (including contingent obligations) or other relationships with any unconsolidated entities or other persons that may have material current or future effect on financial conditions, changes in the financial conditions, results of operations, liquidity, capital expenditures, capital resources, or significant components of revenue or expenses.

Research and Development, Patents and Licenses, etc.

We incur research and development costs associated with the development of our outboard electric powertrains as well as the design of new boats. We have not patented any of our technology.

Going Concern

The financial statements have been prepared on a going concern basis which assumes that we will be able to realize our assets and discharge our liabilities in the normal course of business for the foreseeable future. We incurred a loss before tax of $21,158,061 and net loss of $20,877,186 during the year ended August 31, 2023 and had a cash balance and a working capital surplus of $3,359,257 and $3,676,936, respectively, as at August 31, 2023. Our ability to meet our obligations as they fall due and to continue to operate as a going concern depends on the continued financial support of the creditors and the shareholders. In the past, we have relied on the support of our shareholders to meet our cash requirements. Funding from this or other sources might not be sufficient in the future to continue our research and development. Even if we are able to obtain new financing, it may not be on commercially reasonable terms or terms that are acceptable to us. Failure to obtain such financing on a timely basis could cause us to reduce or terminate our operations.

The Company is evaluating several different strategies and is actively pursuing actions that are expected to increase its liquidity position, including, but not limited to, pursuing additional cost savings initiatives and seeking additional financing from both the public and private markets through the issuance of equity securities. However, the Company's management cannot provide assurances that the Company will be successful in accomplishing any of its proposed financing plans. These matters, when considered in aggregate, indicate the existence of a material uncertainty that raises substantial doubt about the Company’s ability to continue as a going concern for at least 12 months from the issuance of the consolidated financial statements for the year ended August 31, 2023.

Internal control over financial reporting and disclosure controls and procedures

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. The Exchange Act in Rule 13a-15(f ) and 15d-15(f ) defines this as a process designed by, or under the supervision of, our principal executive and principal financial officers and effected by the Board, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that: