Core Molding 10Q 2022 Q2 Quarterly report

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q


☒			QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 30, 2022


☐			TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

for the transition period from ____________ to

Commission File Number 001-12505

CORE MOLDING TECHNOLOGIES, INC.

_______________________________________________________________

(Exact name of registrant as specified in its charter)

Delaware

31-1481870

(State or other jurisdiction

incorporation or organization)

(I.R.S. Employer Identification No.)

800 Manor Park Drive, Columbus, Ohio

43228-0183

(Address of principal executive office)

(Zip Code)

Registrant’s telephone number, including area code (614) 870-5000

N/A

__________________________________________________________

Former name, former address and former fiscal year, if changed since last report.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ¨

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer,” “large accelerated filer,” and “smaller reporting company,” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ¨

Accelerated filer ¨

Non-accelerated Filer ¨

Smaller reporting company

☒

(Do not check if a smaller reporting company)

Emerging growth company

☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act. Yes ☐ No ☒

Securities registered pursuant to Section 12(b) of the Act:

Title of each class

Name of each exchange on which registered

Trading Symbol

Common Stock, par value $0.01

NYSE American LLC

CMT

As of August 8, 2022, the latest practicable date, 8,925,030 shares of the registrant’s common stock were issued, which includes 509,554 shares of unvested restricted common stock.

Table of Contents

Part I — Financial Information

Item 1. Financial Statements

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statements of Operations

(In thousands, except for per share data)

(Unaudited)


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
Net sales	$	98,735	$	80,461	$	189,326	$	153,290

Cost of sales	85,690		66,725		161,774		126,836

Gross margin	13,045		13,736		27,552		26,454

Selling, general and administrative expense	8,660		7,563		17,155		14,935

Operating income	4,385		6,173		10,397		11,519

Other income and expense
Interest expense	459		584		1,000		1,163
Net periodic post-retirement benefit	(31)		(40)		(62)		(80)
Total other expense	428		544		938		1,083

Income before taxes	3,957		5,629		9,459		10,436

Income tax expense	1,769		1,543		3,407		2,894

Net income	$	2,188	$	4,086	$	6,052	$	7,542

Net income per common share:
Basic	$	0.26	$	0.48	$	0.71	$	0.89
Diluted	$	0.26	$	0.48	$	0.71	$	0.89

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statements of Comprehensive Income

(In thousands)

(Unaudited)


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
Net income	$	2,188	$	4,086	$	6,052	$	7,542

Other comprehensive income:









Post-retirement benefit plan adjustments:
Amortization of net actuarial loss	45		44		87		87
Amortization of prior service credits	(125)		(124)		(248)		(248)
Income tax benefit	17		16		34		33

Comprehensive income	$	2,125	$	4,022	$	5,925	$	7,414

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Balance Sheets

(In thousands, except for share data)


	June 30, 2022		December 31, 2021
	(Unaudited)
Assets:
Current assets:
Cash and cash equivalents	$	114	$	6,146
Accounts receivable, net	54,092		35,261
Inventories, net	28,957		25,129

Prepaid expenses and other current assets	8,537		8,606
Total current assets	91,700		75,142

Right of use asset	4,694		5,577
Property, plant and equipment, net	79,407		75,897

Goodwill	17,376		17,376
Intangibles, net	8,593		9,567
Other non-current assets	2,986		3,133
Total Assets	$	204,756	$	186,692

Liabilities and Stockholders’ Equity:
Current liabilities:
Current portion of long-term debt	$	1,146	$	3,943
Revolving debt	6,744		4,424
Accounts payable	33,028		22,695

Contract liability	5,684		6,256

Compensation and related benefits	7,937		7,532
Accrued other liabilities	9,894		8,202
Total current liabilities	64,433		53,052

Other non-current liabilities	3,881		4,605
Long-term debt	22,098		21,251
Post-retirement benefits liability	7,722		7,689
Total Liabilities	98,134		86,597
Commitments and Contingencies	—		—
Stockholders’ Equity:
Preferred stock — $0.01 par value, authorized shares — 10,000,000; no shares outstanding at June 30, 2022 and December 31, 2021	—		—
Common stock — $0.01 par value, authorized shares – 20,000,000; outstanding shares: 8,415,476 at June 30, 2022 and 8,235,740 at December 31, 2021	84		82
Paid-in capital	39,095		38,013
Accumulated other comprehensive income, net of income taxes	948		1,075
Treasury stock - at cost, 3,866,451 shares at June 30, 2022 and 3,818,166 shares at December 31, 2021	(29,099)		(28,617)
Retained earnings	95,594		89,542
Total Stockholders’ Equity	106,622		100,095
Total Liabilities and Stockholders’ Equity	$	204,756	$	186,692

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statement of Stockholders’ Equity

(In thousands, except for share data)

(Unaudited)

For the three months ended June 30, 2021:


	Common Stock Outstanding			Paid-In Capital		Accumulated Other Comprehensive Income		Treasury Stock		Retained Earnings		Total Stockholders' Equity
	Shares	Amount
Balance at March 31, 2021	7,987,800	$	80	$	36,445	$	1,311	$	(28,568)	$	88,327	$	97,595
Net income										4,086		4,086
Change in post-retirement benefits, net of tax $16						(64)						(64)
Restricted stock vested	52,948	—										—
Share-based compensation				486								486
Balance at June 30, 2021	8,040,748	$	80	$	36,931	$	1,247	$	(28,568)	$	92,413	$	102,103

For the six months ended June 30, 2021:


	Common Stock Outstanding			Paid-In Capital		Accumulated Other Comprehensive Income		Treasury Stock		Retained Earnings		Total Stockholders' Equity
	Shares	Amount
Balance at December 31, 2020	7,980,516	$	80	$	36,127	$	1,375	$	(28,521)	$	84,871	$	93,932
Net income										7,542		7,542
Change in post-retirement benefits, net of tax $33						(128)						(128)
Purchase of treasury stock	(3,874)							(47)				(47)
Restricted stock vested	64,106	—										—
Share-based compensation				804								804
Balance at June 30, 2021	8,040,748	$	80	$	36,931	$	1,247	$	(28,568)	$	92,413	$	102,103

Table of Contents

For the three months ended June 30, 2022:


	Common Stock Outstanding			Paid-In Capital		Accumulated Other Comprehensive Income		Treasury Stock		Retained Earnings		Total Stockholders' Equity
	Shares	Amount
Balance at March 31, 2022	8,270,162	$	83	$	38,514	$	1,011	$	(28,617)	$	93,406	$	104,397
Net income										2,188		2,188
Change in post-retirement benefits, net of tax $17						(63)						(63)


Purchase of treasury stock	(48,286)							(482)				(482)
Restricted stock vested	193,600	1										1
Share-based compensation				581								581
Balance at June 30, 2022	8,415,476	$	84	$	39,095	$	948	$	(29,099)	$	95,594	$	106,622

For the six months ended June 30, 2022:


	Common Stock Outstanding			Paid-In Capital		Accumulated Other Comprehensive Income		Treasury Stock		Retained Earnings		Total Stockholders' Equity
	Shares	Amount
Balance at December 31, 2021	8,235,740	$	82	$	38,013	$	1,075	$	(28,617)	$	89,542	$	100,095
Net income										6,052		6,052
Change in post-retirement benefits, net of tax $34						(127)						(127)


Purchase of treasury stock	(48,286)							(482)				(482)
Restricted stock vested	228,022	2										2
Share-based compensation				1,082								1,082
Balance at June 30, 2022	8,415,476	$	84	$	39,095	$	948	$	(29,099)	$	95,594	$	106,622

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(In thousands)

(Unaudited)


	Six months ended June 30,
	2022		2021
Cash flows from operating activities:
Net income	$	6,052	$	7,542
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization	6,219		6,161


Share-based compensation	1,082		804
Losses on foreign currency remeasurement	175		188
Change in operating assets and liabilities:
Accounts receivable	(18,831)		(18,184)
Inventories	(3,828)		(3,679)
Prepaid and other assets	265		1,224
Accounts payable	10,318		9,119
Accrued and other liabilities	1,622		5,557
Post-retirement benefits liability	(128)		(236)
Net cash provided by operating activities	2,946		8,496

Cash flows from investing activities:
Purchase of property, plant and equipment	(8,623)		(5,387)
Net cash used in investing activities	(8,623)		(5,387)

Cash flows from financing activities:
Gross repayments on revolving line of credit	(73,559)		(9,507)
Gross borrowings on revolving line of credit	75,879		9,287
Payments related to the purchase of treasury stock	(482)		(47)
Payment of deferred loan costs	—		(2)

Payment of principal on term loans	(2,193)		(1,375)
Net cash used in financing activities	(355)		(1,644)

Net change in cash and cash equivalents	(6,032)		1,465

Cash and cash equivalents at beginning of period	6,146		4,131

Cash and cash equivalents at end of period	$	114	$	5,596

Cash paid for:
Interest	$	886	$	935
Income taxes	$	3,761	$	3,503
Non-cash investing activities:
Fixed asset purchases in accounts payable	$	731	$	99

See notes to unaudited consolidated financial statements.

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

(Unaudited)

1. BASIS OF PRESENTATION

The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries (“Core Molding Technologies” or the “Company”) at June 30, 2022, and the results of operations and cash flows for the six months ended June 30, 2022. The Company has reclassified certain prior-year amounts to conform to the current year's presentation. The “Notes to Consolidated Financial Statements” contained in the Company's Annual Report on Form 10-K for the year ended December 31, 2021, should be read in conjunction with these consolidated financial statements.

Core Molding Technologies and its subsidiaries operate in the engineered materials market as one operating segment as a molder of thermoplastic and thermoset structural products. The Company produces and sells molded products for varied markets, including medium and heavy-duty trucks, power sports, building products, industrial and utilities and other commercial markets. Core Molding Technologies has its headquarters in Columbus, Ohio, and operates six production facilities in the United States, Canada and Mexico.

2. CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Principles of Consolidation: Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.

Use of Estimates: The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosures of contingent assets and liabilities, and reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions and conditions.

Revenue Recognition: The Company historically has recognized revenue from two streams, product revenue and tooling revenue. Product revenue is earned from the manufacture and sale of sheet molding compounds and thermoset and thermoplastic products. Revenue from product sales is generally recognized when products are shipped, as the Company transfers control to the customer and is entitled to payment upon shipment. In certain circumstances, the Company recognizes revenue from product sales when products are produced and the customer takes control at our production facility.

Tooling revenue is earned from manufacturing multiple tools, molds and assembly equipment as part of a tooling program for a customer. Given that the Company is providing a significant service of producing highly interdependent component parts of the tooling program, each tooling program consists of a single performance obligation to provide the customer the capability to produce a single product. Based on the arrangement with the customer, the Company recognizes revenue either at a point in time or over a given period. When the Company does not have an enforceable right to payment, the Company recognizes tooling revenue at a point in time. In such cases, the Company recognizes revenue upon customer acceptance, which is when the customer has legal title to the tools.

Certain tooling programs include an enforceable right to payment. In those cases, the Company recognizes revenue over time based on the extent of progress towards completion of its performance obligation. The Company uses a cost-to-cost measure of progress for such contracts because it best depicts the transfer of value to the customer and also correlates with the amount of consideration to which the entity expects to be titled in exchange for transferring the promised goods or services to the customer. Under the cost-to-cost measure of progress, progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred.

Table of Contents

Cash and Cash Equivalents: The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents. Cash is held primarily in three banks in three separate jurisdictions. The Company had $114,000 cash on hand at June 30, 2022 and had $6,146,000 cash on hand at December 31, 2021.

Accounts Receivable Allowances: Management maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company has determined that a $53,000 allowance for doubtful accounts is needed at June 30, 2022 and $90,000 at December 31, 2021. Management also records estimates for customer returns and deductions, discounts offered to customers, and for price adjustments. Should customer returns and deductions, discounts, and price adjustments fluctuate from the estimated amounts, additional allowances may be required. The Company had an allowance for estimated chargebacks of $311,000 at June 30, 2022 and $222,000 at December 31, 2021. There have been no material changes in the methodology of these calculations.

Inventories: Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or net realizable value. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage. The Company has recorded an allowance for slow moving and obsolete inventory of $319,000 at June 30, 2022 and $362,000 at December 31, 2021.

Contract Assets/Liabilities: Contract assets and liabilities represent the net cumulative customer billings, vendor payments and revenue recognized for tooling programs. For tooling programs where net revenue recognized and vendor payments exceed customer billings, the Company recognizes a contract asset. For tooling programs where net customer billings exceed revenue recognized and vendor payments, the Company recognizes a contract liability. Customer payment terms vary by contract and can range from progress payments based on work performed or one single payment once the contract is completed. The Company has recorded contract assets of $679,000 at June 30, 2022, and $17,000 at December 31, 2021. Contract assets are generally classified as current within prepaid expenses and other current assets on the Consolidated Balance Sheets. For the six months ended June 30, 2022, the Company recognized no impairments on contract assets. For the six months ended June 30, 2022, the Company recognized $3,547,000 of revenue from contract liabilities related to open jobs outstanding as of December 31, 2021.

Income Taxes: The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more-likely-than-not to realize deferred tax benefits through the generation of future taxable income.

Long-Lived Assets: Long-lived assets consist primarily of property, plant and equipment and definite-lived intangibles. The recoverability of long-lived assets is evaluated by an analysis of operating results and consideration of other significant events or changes in the business environment. The Company evaluates whether impairment exists for property, plant and equipment on the basis of undiscounted expected future cash flows from operations before interest. There were no impairment charges of the Company’s long-lived assets for the six months ended June 30, 2022 and June 30, 2021, respectively.

Goodwill: The purchase consideration of acquired businesses has been allocated to the assets and liabilities acquired based on the estimated fair values on the respective acquisition dates. Based on these values, the excess purchase consideration over the fair value of the net assets acquired was allocated to goodwill. The Company accounts for goodwill in accordance with FASB ASC Topic 350, Intangibles - Goodwill and Other. FASB ASC Topic 350 prohibits the amortization of goodwill and requires these assets be reviewed for impairment.

The annual impairment tests of goodwill may be completed through qualitative assessments; however, the Company may elect to bypass the qualitative assessment and proceed directly to a quantitative impairment test for any period. The Company may resume the qualitative assessment in any subsequent period.

Under a qualitative and quantitative approach, the impairment test for goodwill consists of an assessment of whether it is more-likely-than-not that the fair value is less than its carrying amount. As part of the qualitative assessment, the Company considers relevant events and circumstances that affect the fair value or carrying amount of the Company. Such events and circumstances could include changes in economic conditions, industry and market conditions, cost factors, overall financial performance, and capital markets pricing. The Company places more weight on the events and circumstances that most affect the Company's fair value or carrying amount. These factors are all considered by management in reaching its conclusion about whether to perform step one of the impairment test. If the Company elects to bypass the qualitative assessment, or if a qualitative assessment indicates it is more-likely-than-not that the estimated carrying value exceeds its fair value, the Company proceeds to a quantitative approach. There were no impairment charges of the Company's goodwill for the six months ended June 30, 2022 and June 30, 2021, respectively.

Table of Contents

Self-Insurance: The Company is self-insured with respect to its facilities in Columbus, Ohio; Gaffney, South Carolina; Winona, Minnesota; and Brownsville, Texas for medical, dental and vision claims and Columbus, Ohio for workers’ compensation claims, all of which are subject to stop-loss insurance thresholds. The Company is also self-insured for dental and vision with respect to its Cobourg, Canada location. The Company has recorded an estimated liability for self-insured medical, dental and vision claims incurred but not reported and worker’s compensation claims incurred but not reported at June 30, 2022 and December 31, 2021 of $898,000 and $916,000, respectively.

Fair Value of Financial Instruments: The Company’s financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable and debt. Cash and cash equivalents, accounts receivable and accounts payable carrying values as of June 30, 2022 and December 31, 2021 approximate fair value due to the short-term maturities of these financial instruments. The carrying amounts of the Company's debt with Wells Fargo Bank, National Association approximate fair value as of June 30, 2022 and December 31, 2021 due to the short term nature of the underlying variable rate LIBOR agreements. The fair value of the Company's debt with FGI Equipment Finance, LLC was $10,937,000 as of June 30, 2022. As of December 31, 2021 the Company's debt with FGI Equipment Finance, LLC approximated fair value, due to immaterial movement in interest rates since the Company entered into the Promissory Note on October 20, 2020.

Post-Retirement Benefits: Management records an accrual for post-retirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies’ operations. The effect of a change in healthcare costs is described in Note 12, "Post Retirement Benefits", of the Notes to Consolidated Financial Statements contained in the Company's Annual Report on Form 10-K for the year ended December 31, 2021. Core Molding Technologies had a liability for post-retirement healthcare benefits based on actuarial computed estimates of $9,113,000 at June 30, 2022 and $9,080,000 at December 31, 2021.

3. RECENT ACCOUNTING PRONOUNCEMENTS

Current Expected Credit Loss (CECL)

In June 2016, the FASB issued ASU 2016-13, “Financial Instruments - Credit Losses,” which changes the impairment model for most financial assets and certain other instruments. For trade and other receivables, held-to-maturity debt securities, loans and other instruments, entities will be required to use a new forward-looking “expected loss” model that will replace today’s “incurred loss” model and generally will result in the earlier recognition of allowances for losses. For available-for-sale debt securities with unrealized losses, entities will measure credit losses in a manner similar to current practice, except that the losses will be recognized as an allowance. Subsequent to issuing ASU 2016-13, the FASB issued ASU 2018-19, “Codification Improvements to Topic 326, Financial Instruments - Credit Losses,” for the purpose of clarifying certain aspects of ASU 2016-13. ASU 2018-19 has the same effective date and transition requirements as ASU 2016-13. In April 2019, the FASB issued ASU 2019-04, “Codification Improvements to Topic 326, Financial Instruments - Credit Losses, Topic 815, Derivatives and Hedging, and Topic 825, Financial Instruments,” which is effective with the adoption of ASU 2016-13. In May 2019, the FASB issued ASU 2019-05, “Financial Instruments - Credit Losses (Topic 326),” which is also effective with the adoption of ASU 2016-13. In November 2019, the FASB voted to delay the implementation date for certain companies, including those that qualify as a smaller reporting company under the U.S. Securities and Exchange Commission rules, until fiscal years beginning after December 15, 2022. We will adopt this ASU on its effective date of January 1, 2023. We do not expect the adoption of this ASU to have a material impact on our consolidated financial position, results of operations, cash flows, or presentation thereof.

0Facilitation of the Effects of Reference Rate Reform

In March 2020, the FASB issued ASU No. 2020-4, Facilitation of the Effects of Reference Rate Reform on Financial Reporting (Topic 848). The ASU provides optional expedients and exceptions for applying GAAP to transactions affected by reference rate (e.g., LIBOR) reform if certain criteria are met, for a limited period of time to ease the potential burden in accounting for (or recognizing the effects of) reference rate reform on financial reporting. The ASU is effective as of March 12, 2020 through December 31, 2022. We have done an assessment verifying ASU No. 2020-4 no longer has an impact on the Company due to the Credit Agreement entered into on July 22, 2022 as described in Note 15 - Subsequent Events.

Table of Contents

4. NET INCOME PER COMMON SHARE

Net income per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but includes the effect of the assumed exercise of dilutive stock appreciation rights and restricted stock under the treasury stock method.

On May 13, 2021, the Company's shareholders approved the 2021 Long Term Equity Incentive Plan (the “2021 Plan”) that replaced the 2006 Long Term Equity Incentive Plan (the “2006 Plan”) approved in May 2006 and amended in May 2015. The 2021 Plan provides restricted stock award recipients voting rights equivalent to the Company's common stock and accrual of dividends but not receipt of dividends until all conditions or restrictions related to such award have been satisfied. Accordingly, the restricted shares are not considered participating shares. The 2006 Plan provides restricted stock award recipients voting rights equivalent to the Company’s common stock and accrual and receipt of dividends irrespective of any conditions or restrictions related to such award being satisfied. Accordingly, the restricted shares granted from the 2006 Plan are considered a participating security and the Company is required to apply the two-class method to consider the impact of the restricted shares on the calculation of basic and diluted earnings per share.

The computation of basic and diluted net income per common share (in thousands, except for per share data) is as follows:


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
Net income	$	2,188	$	4,086	$	6,052	$	7,542
Less: net income allocated to participating securities	40		232		121		437
Net income available to common shareholders	$	2,148	$	3,854	$	5,931	$	7,105

Weighted average common shares outstanding — basic	8,329,000		8,002,000		8,298,000		7,994,000
Effect of weighted average dilutive securities	—		12,000		—		19,000
Weighted average common and potentially issuable common shares outstanding — diluted	8,329,000		8,014,000		8,298,000		8,013,000

Basic net income per common share	$	0.26	$	0.48	$	0.71	$	0.89
Diluted net income per common share	$	0.26	$	0.48	$	0.71	$	0.89

The computation of basic and diluted net income per participating share is as follows (in thousands, except for per share data):


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
Net income allocated to participating securities	$	40	$	232	$	121	$	437

Weighted average participating shares outstanding — basic	156,000		482,000		170,000		491,000
Effect of dilutive securities	—		—		—		—
Weighted average common and potentially issuable common shares outstanding — diluted	156,000		482,000		170,000		491,000

Basic net income per participating share	$	0.26	$	0.48	$	0.71	$	0.89
Diluted net income per participating share	$	0.26	$	0.48	$	0.71	$	0.89

Table of Contents

5. MAJOR CUSTOMERS

The Company had 5 major customers during the six months ended June 30, 2022, BRP, Inc. ("BRP"), Navistar, Inc. ("Navistar"), PACCAR, Inc. ("PACCAR"), Universal Forest Products, Inc. ("UFP") and Volvo Group North America, LLC ("Volvo"). Major customers are defined as customers whose sales individually consist of more than ten percent of the Company's total sales during any annual or interim reporting period in the current year. The loss of a significant portion of sales to these customers could have a material adverse effect on the Company.

The following table presents sales revenue for the above-mentioned customers for the three and six months ended June 30, 2022 and 2021 (in thousands):


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
BRP product sales	$	14,498	$	10,420	$	26,705	$	18,989
BRP tooling sales	187		124		337		238
Total BRP sales	14,685		10,544		27,042		19,227

Navistar product sales	14,110		10,969		28,132		20,906
Navistar tooling sales	2,260		—		2,270		306
Total Navistar sales	16,370		10,969		30,402		21,212

PACCAR product sales	9,159		10,830		17,905		20,184
PACCAR tooling sales	74		503		185		832
Total PACCAR sales	9,233		11,333		18,090		21,016

UFP product sales	11,856		15,115		24,543		25,772
UFP tooling sales	—		—		—		—
Total UFP sales	11,856		15,115		24,543		25,772

Volvo product sales	11,885		7,429		22,800		17,554
Volvo tooling sales	—		27		87		47
Total Volvo sales	11,885		7,456		22,887		17,601

Other product sales	31,809		24,354		63,133		44,846
Other tooling sales	2,897		690		3,229		3,616
Total other sales	34,706		25,044		66,362		48,462

Total product sales	93,317		79,117		183,218		148,251
Total tooling sales	5,418		1,344		6,108		5,039
Total sales	$	98,735	$	80,461	$	189,326	$	153,290

Table of Contents

6. INVENTORY

Inventories, net consisted of the following (in thousands):


	June 30, 2022		December 31, 2021
Raw materials	$	20,454	$	17,160
Work in process	1,945		1,976
Finished goods	6,558		5,993
Total	$	28,957	$	25,129

Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage.

7. LEASES

The Company has operating leases with fixed payment terms for certain buildings and warehouses. The Company's leases have remaining lease terms of less than one year to four years, some of which include options to extend the lease for five years. Operating leases are included in operating lease right-of-use ("ROU") assets, accrued other liabilities and other non-current liabilities in the Consolidated Balance Sheets. ROU assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease.

The Company used the applicable incremental borrowing rate at implementation date to measure lease liabilities and ROU assets. The incremental borrowing rate used by the Company was based on baseline rates and adjusted by the credit spreads commensurate with the Company’s secured borrowing rate. At each reporting period when there is a new lease initiated, the Company will utilize its incremental borrowing rate to perform lease classification tests on lease components and to measure ROU assets and lease liabilities.

The components of lease expense were as follows (in thousands):


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
Operating lease cost	$	422	$	386	$	845	$	754

Other supplemental balance sheet information related to leases was as follows (in thousands):


	June 30, 2022		December 31, 2021
Operating lease right of use assets	$	4,694	$	5,577

Current operating lease liabilities(A)	$	1,428	$	1,489
Noncurrent operating lease liabilities(B)	3,309		4,024
Total operating lease liabilities	$	4,737	$	5,513

(A)Current operating lease liabilities are included in accrued other liabilities in the Consolidated Balance Sheets.

(B)Noncurrent operating lease liabilities are included in other non-current liabilities in the Consolidated Balance Sheets.

The following table presents certain information related to lease terms and discount rates for leases:


Operating leases	June 30, 2022		December 31, 2021
Weighted average remaining lease term (in years):	3.7		4.2

Weighted average discount rate:	4.0	%	4.1	%

Table of Contents

Other information related to leases were as follows (in thousands):


	Six months ended June 30,
	2022		2021
Cash paid for amounts included in the measurement of lease liabilities
Operating cash flows from operating leases(C)	$	845	$	754

(C)Cash flow from operating leases are included in prepaid and other assets in the Consolidated Statements of Cash Flows.

Maturities of operating lease liabilities were as follows (in thousands):


	June 30, 2022		December 31, 2021
2022 (remainder of year)	$	782	$	1,567
2023	1,484		1,468
2024	1,489		1,473
2025	798		783
2026	713		698
Total lease payments	5,266		5,989
Less: imputed interest	(529)		(476)
Total lease obligations	4,737		5,513
Less: current obligations	(1,428)		(1,489)
Long-term lease obligations	$	3,309	$	4,024

8. PROPERTY, PLANT & EQUIPMENT

Property, plant and equipment, net consisted of the following for the periods specified (in thousands):


	June 30, 2022		December 31, 2021
Property, plant and equipment	$	192,012	$	183,500
Accumulated depreciation	(112,605)		(107,603)
Property, plant and equipment — net	$	79,407	$	75,897

Property, plant, and equipment are recorded at cost, unless obtained through acquisition, then assets are recorded at estimated fair value at the date of acquisition. Depreciation is provided on a straight-line method over the estimated useful lives of the assets. The carrying amount of long-lived assets is evaluated annually to determine if an adjustment to the depreciation period or to the unamortized balance is warranted. Depreciation expense for the three months ended June 30, 2022 and 2021 was $2,485,000 and $2,461,000, respectively. Depreciation expense for the six months ended June 30, 2022 and 2021 was $5,002,000 and $4,943,000, respectively. Amounts invested in capital additions in progress were $10,967,000 and $6,605,000 at June 30, 2022 and December 31, 2021, respectively. At June 30, 2022 and December 31, 2021, purchase commitments for capital expenditures in progress were $5,923,000 and $5,315,000, respectively.

Table of Contents

9. GOODWILL AND INTANGIBLES

Goodwill activity for the six months ended June 30, 2022 consisted of the following (in thousands):


Balance at December 31, 2021	$	17,376
Additions	—
Impairment	—
Balance at June 30, 2022	$	17,376

Intangibles, net at June 30, 2022 were comprised of the following (in thousands):


Definite-lived Intangible Assets	Amortization Period	Gross Carrying Amount		Accumulated Amortization		Net Carrying Amount
Trade name	25 Years	$	250	$	(73)	$	177
Trademarks	10 Years	1,610		(718)		892
Non-competition agreement	5 Years	1,810		(1,614)		196
Developed technology	7 Years	4,420		(2,815)		1,605
Customer relationships	10-12 Years	9,330		(3,607)		5,723
Total		$	17,420	$	(8,827)	$	8,593

Intangibles, net at December 31, 2021 were comprised of the following (in thousands):


Definite-lived Intangible Assets	Amortization Period	Gross Carrying Amount		Accumulated Amortization		Net Carrying Amount
Trade name	25 Years	$	250	$	(68)	$	182
Trademarks	10 Years	1,610		(637)		973
Non-competition agreement	5 Years	1,810		(1,433)		377
Developed technology	7 Years	4,420		(2,499)		1,921
Customer relationships	10-12 Years	9,330		(3,216)		6,114
Total		$	17,420	$	(7,853)	$	9,567

The aggregate intangible asset amortization expense was $487,000 for the three months ended June 30, 2022 and 2021. The aggregate intangible amortization expense was $974,000 for the six months ended June 30, 2022 and 2021.

10. POST-RETIREMENT BENEFITS

The components of expense for the Company’s post-retirement benefit plans are as follows (in thousands):


	Three months ended June 30,				Six months ended June 30,
	2022		2021		2022		2021
Pension expense:
Multi-employer plan	$	254	$	232	$	461	$	421
Defined contribution plan	386		316		751		618
Total pension expense	640		548		1,212		1,039
Health and life insurance:
Interest cost	49		40		99		81
Amortization of prior service credits	(125)		(124)		(248)		(248)
Amortization of net loss	45		44		87		87
Net periodic benefit credit	(31)		(40)		(62)		(80)
Total post-retirement benefits expense	$	609	$	508	$	1,150	$	959

Table of Contents

The Company made payments of $1,525,000 to pension plans and $66,000 for post-retirement healthcare and life insurance during the six months ended June 30, 2022. For the remainder of 2022, the Company expects to make approximately $1,506,000 of pension plan payments, of which $630,000 was accrued at June 30, 2022. The Company also expects to make approximately $1,325,000 of post-retirement healthcare and life insurance payments for the remainder of 2022, all of which were accrued at June 30, 2022.

11. DEBT

Debt consists of the following (in thousands):


	June 30, 2022		December 31, 2021

Wells Fargo term loans payable	$	12,792	$	13,992
FGI term loans payable	11,584		12,561
Leaf Capital term loan payable	102		119
Total	24,478		26,672
Less deferred loan costs	(1,234)		(1,478)
Less current portion	(1,146)		(3,943)
Long-term debt	$	22,098	$	21,251

Term Loans

Wells Fargo Term Loans

On October 27, 2020, the Company entered into a credit agreement (the “Credit Agreement”) with Wells Fargo Bank, National Association, as administrative agent, lead arranger and book runner, and the lenders party thereto (the “Lenders”). Pursuant to the terms of the Credit Agreement, the Lenders made available to the Company secured term loans (the “WF Term Loans”) in the maximum aggregate principal amount of $18,500,000 ($16,790,000 of which was advanced to the Company on October 28, 2020). The proceeds from the WF Term Loans were used to pay off the Company’s existing outstanding indebtedness with KeyBank National Association, and to pay certain fees and expenses associated with the financing. On July 22, 2022, all existing outstanding indebtedness of the Company owed to the Lenders was repaid in full as part of the refinancing further described below.

At the option of the Company, the WF Term Loans bears interest at a per annum rate equal to LIBOR plus a margin of 300 basis points or base rate plus a margin of 200 basis points. LIBOR rate means the greater of (a) 0.75% per annum and (b) the per annum published LIBOR rate for interest periods of one, three or six months as chosen by the Company. Base rate is the greater of (a) 1.0% per annum, (b) the Federal Funds Rate plus 0.5%, (c) LIBOR Rate plus 100 basis or (d) prime rate. The weighted average interest rate was 6.75% and 3.77% as of June 30, 2022 and December 31, 2021, respectively.

The WF Term Loans are to be repaid in monthly installments of $200,000 plus interest, with the remaining outstanding balance due on November 30, 2024, subject to certain optional and mandatory repayment terms. The Company’s obligations under the WF Term Loans are unconditionally guaranteed by each of the Company’s U.S. and Canadian subsidiaries, with such obligations of the Company and such subsidiaries being secured by a lien on substantially all of their U.S. and Canadian assets.

The WF Term Loans contains reporting, indebtedness, and financial covenants. The Company is in compliance with such covenants as of June 30, 2022.

Voluntary prepayments of amounts outstanding under the WF Term Loans are permitted at any time without premium or penalty. To the extent applicable, LIBOR breakage fees may be charged in connection with any prepayment.

FGI Equipment Finance LLC Term Loan

Table of Contents

fees and expenses associated with the transactions, and $1,200,000 which proceeds were used to fund a security deposit to be held by FGI. Interest on the FGI Term Loan is a fixed rate of 8.25% and is payable monthly. The security deposit of $1,200,000 is included in other assets in the Consolidated Balance Sheets. On July 22, 2022, all existing outstanding indebtedness of the Company owed to the FGI was repaid in full as part of the refinancing further described below.

The FGI Term Loan is to be repaid in monthly principal and interest installments of $117,000 for the first 12 months, $246,000 for the subsequent 59 months and $1,446,000 due on October 31, 2026, subject to certain optional and mandatory repayment terms. The Company’s obligations under the Master Security Agreement are secured by certain machinery and equipment of the guarantors located in Mexico, and real property of Core Composites de Mexico, S. de R.L. de C.V.,a subsidiary of the Company organized in Mexico, located in Matamoros, Mexico.

The Company may prepay in full or in part (but not less than the amount equal to 20% of the original principal amount of the loan) outstanding amounts before they are due on any scheduled Payment Date upon at least thirty (30) days’ prior written notice. The Company will pay a “Prepayment Fee” in an amount equal to an additional sum equal to the following percentage of the principal amount to be prepaid for prepayments occurring in the indicated period: four percent (4.0%) for prepayments occurring prior to the first anniversary of the FGI Term Loan; three percent (3.0%) for prepayments occurring on the first anniversary of the FGI Term Loan until the second anniversary of the FGI Term Loan; two percent (2.0%) for prepayments occurring on and after the second anniversary of the FGI Term Loan and prior to the third anniversary of the Loan; and one percent (1.0%) for prepayments occurring any time thereafter.

Leaf Capital Funding

On April 24, 2020 the Company entered into a finance agreement with Leaf Capital Funding of $175,000 for equipment. The parties agreed to a fixed interest rate of 5.50% and a term of 60 months. On July 22, 2022, all existing outstanding indebtedness of the Company owed to Leaf Capital Funding was repaid in full as part of the refinancing further described below.

Revolving Loans

Wells Fargo Revolving Loan

Pursuant to the terms of the Credit Agreement, the Lenders made available to the Company a revolving loan commitment (the “WF Revolving Loan”) of $25,000,000 ($8,745,000 of which was advanced to the Company on October 28, 2020). The proceeds from the WF Revolving Loan were used to pay off the Company’s outstanding indebtedness with KeyBank National Association, and to pay certain fees and expenses associated with the financing. On July 22, 2022, all existing outstanding indebtedness of the Company owed under the WF Revolving Loan was repaid in full as part of the refinancing further described below.

The Credit Agreement also makes available to the Company an incremental revolving commitment in the maximum amount of $10,000,000 at the Company’s option at any time during the three-year period following the closing.

The borrowing availability under the WF Revolving Loan is the lesser of (a) the loan commitment of $25,000,000 or (b) the sum of 90% of eligible investment grade accounts receivable, 85% of non-investment grade eligible accounts receivable and 65% of eligible inventory.

At the option of the Company, the WF Revolving Loan bears interest at a per annum rate equal to LIBOR plus a margin of 200 to 250 basis points or base rate plus a margin of 100 to 150 basis points, with the margin rate being based on the excess availability amount under the line of credit. LIBOR rate means the greater of (a) 0.75% per annum and (b) the per annum published LIBOR rate for interest periods of one, three or six months as chosen by the Company. Base rate is the greater of (a) 1.0% per annum, (b) the Federal Funds Rate plus 0.5%, (c) LIBOR Rate plus 100 basis and (d) prime rate. The weighted average interest rate was 5.75% and 4.25% as of June 30, 2022 and December 31, 2021, respectively.

The WF Revolving Loan commitment terminates, and all outstanding borrowings thereunder must be repaid, by November 30, 2024. The Company has $24,278,000 of available revolving loans of which $6,744,000 is outstanding as of June 30, 2022. As of December 31, 2021, the Company had $24,337,000 of available revolving loans of which $4,424,000 was outstanding.

The WF Revolving Loan contains the same covenants as the WF Term Loans.

Wells Fargo Bank will issue up to $2,000,000 of Letters of Credit in accordance with the terms of the Credit Agreement upon the Company’s request. As of June 30, 2022, the Company had one Letter of Credit outstanding for $160,000.

Table of Contents

Credit Refinancing

On July 22, 2022, the Company entered into a Credit Agreement (the “Huntington Credit Agreement”) with The Huntington National Bank (“Huntington”), as the sole lender, administrative agent, lead arranger and book runner. Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company secured loans (the “Huntington Loans”) in the maximum aggregate principal amount of $75,000,000, consisting of (i) a revolving loan commitment of $25,000,000 (approximately $13,689,000 of which was advanced to the Company on July 22, 2022), (ii) term loan commitments of $25,000,000 ($25,000,000 of which was advanced to the Company on July 22, 2022) and (ii) Capex loan commitments of $25,000,000 (NaN of which was advanced to the Company on July 22, 2022). The initial proceeds of the Huntington Loans were used in part to (i) repay all existing outstanding indebtedness of the Company owing to the Lenders under the Credit Agreement, FGI and Leaf Capital Funding and (ii) pay certain fees and expenses associated with the transactions contemplated by the Huntington Credit Agreement. Additional proceeds of the Huntington Loans will be used to finance the ongoing general needs of the Company. For information on the Huntington Loans, see Note 15 - Subsequent Events, to the consolidated financial statements included herein.

Bank Covenants

The Company is required to meet certain financial covenants included in the Credit Agreement, which covenants include a fixed charge coverage ratio. As of June 30, 2022, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described above.

12. INCOME TAXES

The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more-likely-than-not to realize deferred tax benefits through the generation of future taxable income. Management makes assumptions, judgments, and estimates to determine the deferred tax assets and liabilities. The Company evaluates provisions and deferred tax assets quarterly to determine if adjustments to our valuation allowance are required based on the consideration of all available evidence.

The Company’s Consolidated Balance Sheets include net deferred tax assets of $252,000 for the Canadian and $841,000 for the Mexican tax jurisdictions and a net deferred tax liability of $572,000 for the U.S. tax jurisdiction at June 30, 2022. The deferred tax asset is classified in other non-current assets and deferred tax liabilities are in other non-current liabilities. At June 30, 2022, the Company's net deferred tax liability included a valuation allowance of $3,939,000, due to cumulative losses over the last three years and uncertainty related to the Company's ability to realize United States deferred tax assets. The Company believes that the deferred tax assets associated with the Canadian and Mexican tax jurisdictions are more-likely-than-not to be realizable based on estimates of future taxable income.

Income tax expense for the three months ended June 30, 2022 is estimated to be $1,769,000, approximately 44.7% of income before income taxes, and includes tax expense in Canadian and Mexican tax jurisdictions. U.S. operations incurred a net loss for the three months ended June 30, 2022 and the net loss tax benefit was offset with a full valuation reserve. Income tax benefit for the three months ended June 30, 2021 was estimated to be $1,543,000, approximately 27.4% of income before income taxes.

The Company files income tax returns in the United States, Mexico, Canada and various state and local jurisdictions. The Company is subject to federal income tax examinations for tax years 2014 through 2017 but the scope of examination is limited to adjustments resulting from the Net Operating Loss carry back claims from the 2018, 2019, and 2020 tax years. The Company is subject to federal income tax examinations for years 2018 through 2021 with unlimited scope. The Company is not subject to state examinations for years before 2017. The Company is not subject to Mexican income tax examinations by Mexican authorities for the years before 2017 and is not subject to Canadian income tax examinations by Canadian authorities for the years before 2018.

13. STOCK BASED COMPENSATION

On May 13, 2021, The Company's shareholders approved the 2021 Long Term Equity Incentive Plan (the “2021 Plan”) that replaced the 2006 Long Term Equity Incentive Plan (the “2006 Plan”) approved in May 2006 and amended in May 2015. The 2021 Plan allows for grants to employees, officers, non-employee directors, consultants, independent contractors and advisors of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units, and other stock-based awards (“stock awards”) up to an aggregate of 436,530 awards. Awards can be granted under the 2021 Plan

Table of Contents

through the earlier of May 13, 2031, or the date the maximum number of available awards under the 2021 Plan have been granted. No new awards may be granted from the 2006 Plan.

Awards under the 2021 Plan vest over one to three years and shares previously awarded and currently unvested under the 2006 Plan vest over three years. Shares granted under both the 2006 and 2021 Plans vest upon the date of a participant’s death, disability or change in control.

Restricted Stock

The Company grants shares of its common stock to certain directors, officers, key managers and employees in the form of unvested stock and units (“Restricted Stock”). These awards are measured at the fair value of the Company's common stock on the date of issuance and recognized ratably as compensation expense over the applicable vesting period, which is typically three years. The Company adjusts compensation expense for actual forfeitures, as they occur.

The following summarizes the status of Restricted Stock and changes during the six months ended June 30, 2022:


	Number of Shares	Weighted Average Grant Date Fair Value
Unvested balance at December 31, 2021	459,420	$	9.79
Granted	287,485	10.40
Vested	(228,022)	9.05
Forfeited	(9,329)	11.02
Unvested balance at June 30, 2022	509,554	$	10.43

At June 30, 2022 and 2021, there was $4,871,000 and $4,783,000, respectively, of total unrecognized compensation expense, related to Restricted Stock grants. The unrecognized compensation expense at June 30, 2022 is expected to be recognized over the weighted-average period of 2.2 years. Total compensation cost related to Restricted Stock grants for the three months ended June 30, 2022 and 2021 was $570,000 and $456,000, respectively. Total compensation cost related to Restricted Stock grants for the six months ended June 30, 2022 and 2021 was $1,037,000 and $745,000, respectively, all of which was recorded to selling, general and administrative expense.

During the six months ended June 30, 2022 employees surrendered 48,286 shares of the Company's common stock to satisfy income tax withholding obligations in connection with the vesting of restricted awards. Employees surrendered 3,874 shares for the six months ended June 30, 2021.

Stock Appreciation Rights

As part of the Company's 2019 annual grant, Stock Appreciation Rights ("SARs") were granted with a grant price of $10. These awards have a contractual term of five years and vest ratably over a period of three years or immediately vest if the recipient is over 65 of age. These awards are valued using the Black-Scholes option pricing model, and are recognized ratably as compensation expense over three years.

A summary of the Company's stock appreciation rights activity for the six months ended June 30, 2022 is as follows:


	Number of Shares	Weighted Average Grant Date Fair Value
Outstanding as of December 31, 2021	177,016	$	2.57
Granted	—	—
Exercised	—	—
Forfeited	—	—
Outstanding at end of the period ended June 30, 2022	177,016	$	2.57
Exercisable at end of the period ended June 30, 2022	177,016	$	2.57

Table of Contents

The average remaining contractual term for SARs outstanding at June 30, 2022 is 1.9 years with no aggregate intrinsic value. There was no unrecognized compensation expense, related to SARs at June 30, 2022. Total compensation cost related to SARs for the three months ended June 30, 2022 and 2021 was $11,000 and $31,000, respectively. Total Compensation cost related to SARs for the six months ended June 30, 2022 and 2021 was $45,000 and $60,000, respectively, all of which was recorded to selling, general and administrative expense.

14. ACCUMULATED OTHER COMPREHENSIVE INCOME

The following table presents changes in Accumulated Other Comprehensive Income, net of tax, for the six months ended June 30, 2022 and 2021 (in thousands):


2021:	Post Retirement Benefit Plan Items(A)
Balance at December 31, 2020	$	1,375

Amounts reclassified from accumulated other comprehensive income	(161)
Income tax benefit	33
Balance at June 30, 2021	$	1,247

2022:
Balance at December 31, 2021	$	1,075

Amounts reclassified from accumulated other comprehensive income	(161)
Income tax benefit	34
Balance at June 30, 2022	$	948

(A)The effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in other income and expense on the Consolidated Statements of Operations. These Accumulated Other Comprehensive Income components are included in the computation of net periodic benefit cost (see Note 10, "Post-Retirement Benefits" for additional details). The tax effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Operations.

15. SUBSEQUENT EVENTS

Credit Refinancing

On July 22, 2022, the Company entered into a Credit Agreement (the "Huntington Credit Agreement") with The Huntington National Bank (“Huntington”), as the sole lender, administrative agent, lead arranger and book runner. Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company secured loans (the "Huntington Loans") in the maximum aggregate principal amount of $75,000,000, consisting of (i) a revolving loan commitment of $25,000,000 (approximately $13,689,000 of which was advanced to the Company on July 22, 2022), (ii) term loan commitments of $25,000,000 ($25,000,000 of which was advanced to the Company on July 22, 2022) and (ii) Capex loan commitments of $25,000,000 (none of which was advanced to the Company on July 22, 2022). The revolving loan commitment terminates, and all outstanding borrowings thereunder must be repaid on July 22, 2027. The term loan is to be repaid in monthly installments beginning in August 2022 of approximately $104,000 per month for the first 24 months, approximately $156,000 per month for the next 24 months, approximately $208,000 for the next 12 months and the remaining balance to be paid in July 2027. Any borrowings from the Capex loan will be converted to new Term Loans annually each February, beginning February 2025, and will have monthly principal repayments based on a sixty month amortization period with all amounts outstanding on the Capex Term Loans being fully due in July 2027. The Company's obligation under the Huntington Credit Agreement and the Loans are secured by each of the Company's U.S. and Canadian assets and 65% of the Company's equity interest in its Mexican subsidiaries and unconditionally guaranteed by certain of its subsidiaries.. Interest is payable monthly and is based on either Daily Simple SOFR or ABR, as defined by the Huntington Credit Agreement, at the discretion of the Company. As of July 22, 2022, the revolving loan and term loan was based on the Daily Simple SOFR resulting in an interest rate of 3.34%.

Table of Contents

Concurrent with the closing of the Huntington Credit Agreement, the Company entered into an interest rate swap agreement that became effective July 22, 2022 and continues through July 22, 2027, which was designated as a cash flow hedge for the entire term loan of $25,000,000 mentioned above. Under this agreement, the Company will pay a fixed rate of 4.75% to the counterparty and receives daily simple SOFR.

The initial proceeds of the Huntington Loans were used in part to (i) repay all existing outstanding indebtedness of the Company owing to the Lenders under the Credit Agreement, FGI and Leaf Capital Funding and (ii) pay certain fees and expenses associated with the transactions contemplated by the Huntington Credit Agreement. Additional proceeds of the Huntington Loans will be used to finance the ongoing general needs of the Company.

The Company recorded losses of $1,234,000 from writing off outstanding deferred loan costs and approximately $348,000 from a prepayment fee associated with the FGI Term Loan.

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This Management's Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws. As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies' operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies' control. Words such as “may,” “will,” “could,” “would,” “should,” “anticipate,” “predict,” “potential,” “continue,” “expect,” “intend,” “plans,” “projects,” “believes,” “estimates,” “confident” and similar expressions are used to identify these forward-looking statements. These uncertainties and factors could cause Core Molding Technologies' actual results to differ materially from those matters expressed in or implied by such forward-looking statements.

Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this Quarterly Report on Form 10-Q: business conditions in the plastics, transportation, power sports, utilities and commercial product industries (including changes in demand for truck production); federal and state regulations (including engine emission regulations); general economic, social, regulatory (including foreign trade policy) and political environments in the countries in which Core Molding Technologies operates; the adverse impact of the coronavirus (COVID-19) global pandemic on our business, results of operations, financial position, liquidity or cash flow, as well as impact on customers and supply chains; safety and security conditions in Mexico and Canada; fluctuations in foreign currency exchange rates; dependence upon certain major customers as the primary source of Core Molding Technologies’ sales revenues; efforts of Core Molding Technologies to expand its customer base; the ability to develop new and innovative products and to diversify markets, materials and processes and increase operational enhancements; ability to accurately quote and execute manufacturing processes for new business; the actions of competitors, customers, and suppliers; failure of Core Molding Technologies’ suppliers to perform their obligations; the availability of raw materials; inflationary pressures; new technologies; regulatory matters; labor relations; labor availability; a work stoppage or labor disruption at one of our union locations or one of our customer or supplier locations; the loss or inability of Core Molding Technologies to attract and retain key personnel; the Company's ability to successfully identify, evaluate and manage potential acquisitions and to benefit from and properly integrate any completed acquisitions; federal, state and local environmental laws and regulations; the availability of sufficient capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees and other customer charges; risk of cancellation or rescheduling of orders; management’s decision to pursue new products or businesses which involve additional costs, risks or capital expenditures; inadequate insurance coverage to protect against potential hazards; equipment and machinery failure; product liability and warranty claims; and other risks identified from time to time in Core Molding Technologies’ other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of Core Molding Technologies' Annual Report on Form 10-K for the year ended December 31, 2021.

Description of the Company

Business Overview

General

The Company’s business and operating results are directly affected by changes in overall customer demand, operational costs and performance and leverage of our fixed cost and selling, general and administrative ("SG&A") infrastructure.

Product sales fluctuate in response to several factors, including many that are beyond the Company’s control, such as general economic conditions, interest rates, government regulations, consumer spending, raw material cost inflation, labor availability, and our customers’ production rates and inventory levels. The Company's customers operate in many different markets with different cyclicality and seasonality.

Operating performance is dependent on the Company’s ability to manage changes in input costs for items such as raw materials, labor, and overhead operating costs. The Company has certain contractual commitments that restrict its ability to pass through

Table of Contents

changes in input costs to certain customers. As a result, during periods of significant increases or decreases in input costs operating results may be impacted.

Performance is also affected by manufacturing efficiencies, including items such as on time delivery, quality, scrap, and productivity. Market factors of supply and demand can impact operating costs. In periods of rapid increases or decreases in customer demand, the Company is required to ramp operational activity up or down quickly, which may impact manufacturing efficiencies more than in periods of steady demand.

Operating performance is also dependent on the Company’s ability to effectively launch new customer programs, which are extremely complex in nature. The start of production of a new program is the result of a process of developing new molds and assembly equipment, validation testing, manufacturing process design, development and testing, along with training and often hiring employees. Meeting the targeted levels of manufacturing efficiency for new programs usually occurs over time as the Company gains experience with new tools and processes. Therefore, during a new program launch period, start-up costs and inefficiencies can affect operating results.

Forward Looking

Looking forward, based on our overall evaluation of customers' forecasts, new program launches and price increases, the Company expects sales for the second half of 2022 to increase as compared to the second half of 2021. Customers in the medium and heavy-duty truck market are forecasting higher demand in the second half of 2022. New programs launched in the power sports and utilities markets in 2021 as well as anticipated launches of previously awarded new programs during the remainder of 2022 are also expected to increase sales. We are continuing to monitor ongoing customer supply chain disruptions and higher interest rates and would anticipate some unfavorable impact on customer demand, although we cannot estimate the timing for when any such supply chain disruptions and higher interests rates may impact demand.

The Company’s supply chains have become more stable, but the Company continues to experience higher raw material costs and anticipates most raw material costs to remain elevated in 2022, including thermoset resins and fiberglass. The Company was able to recover certain raw material cost increases in the first half of 2022 and is continuing to pursue cost recoveries.

Labor market constraints in all Company locations started to improve in the first half of 2022. We anticipate the labor constraints to continue to improve, subject to any pandemic challenges, although we anticipate ongoing wage inflation.

Results of Operations

Three Months Ended June 30, 2022, as Compared to Three Months Ended June 30, 2021

Net sales for the three months ended June 30, 2022 and 2021 totaled $98,735,000 and $80,461,000, respectively. Included in net sales were tooling project sales of $5,418,000 and $1,344,000 for the three months ended June 30, 2022 and 2021, respectively. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, for the three months ended June 30, 2022 were $93,317,000 compared to $79,117,000 for the same period in 2021. The increase in sales is primarily the result of higher demand from the medium and heavy-duty truck, power sports, and industrials markets, price increases related to raw material and labor cost inflation and launch of new programs. The Company's product sales for the three months ended June 30, 2022 compared to the same period in 2021 by market are as follows (in thousands):


	Three months ended June 30,
	2022		2021
Medium and heavy-duty truck	$	36,694	$	30,776
Power sports	21,263		16,338
Building products	14,501		17,032
Industrial and utilities	8,743		6,400
All other	12,116		8,571
Net product revenue	$	93,317	$	79,117

Gross margin was approximately 13.2% of sales for the three months ended June 30, 2022, compared with 17.1% for the three months ended June 30, 2021. The gross margin percentage decrease was negatively impacted by product mix and production

Table of Contents

inefficiencies of 3.4% and unfavorable net changes in selling price and raw material costs of 1.6%, offset by higher fixed cost leverage of 1.1%.

SG&A was $8,660,000 for the three months ended June 30, 2022, compared to $7,563,000 for the three months ended June 30, 2021. Increased SG&A expenses resulted primarily from higher labor and benefits costs of $570,000, increase in insurance costs of $236,000 and professional fees of $169,000.

Interest expense totaled $459,000 for the three months ended June 30, 2022, compared to interest expense of $584,000 for the three months ended June 30, 2021. The decrease in interest expense was primarily due to the Company receiving interest income of $104,000 related to an income tax refund and a lower average outstanding debt balance during the three months ended June 30, 2022, when compared to the same period in 2021.

Income tax expense for the three months ended June 30, 2022 is estimated to be $1,769,000, approximately 44.7% of income before income taxes, and includes tax expense in Canadian and Mexican tax jurisdictions. U.S. operations incurred a net loss for the three months ended June 30, 2022 and the net loss tax benefit was offset with a full valuation reserve. Income tax expense for the three months ended June 30, 2021 was estimated to be $1,543,000, approximately 27.4% of income before income taxes.

The Company recorded net income for the three months ended June 30, 2022 of $2,188,000 or $0.26 per basic and diluted share, compared with a net income of $4,086,000, or $0.48 per basic and diluted share, for the three months ended June 30, 2021.

Comprehensive income totaled $2,125,000 for the three months ended June 30, 2022, compared to comprehensive income of $4,022,000 for the same period ended June 30, 2021. The decrease was related to the decrease in net income of $1,898,000.

Six Months Ended June 30, 2022, as Compared to Six Months Ended June 30, 2021

Net sales for the six months ended June 30, 2022 and 2021 totaled $189,326,000 and $153,290,000, respectively. Included in net sales were tooling project sales of $6,108,000 and $5,039,000 for the six months ended June 30, 2022 and 2021, respectively. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, for the six months ended June 30, 2022 were $183,218,000 compared to $148,251,000 for the same period in 2021. The increase in sales is primarily the result of higher demand from the medium and heavy-duty truck, power sports, and industrial and utilities markets, price increases related to raw material and labor cost inflation and launch of new programs. The Company's product sales for the six months ended June 30, 2022 compared to the same period in 2021 by market are as follows (in thousands):


	Six months ended June 30,
	2022		2021
Medium and heavy-duty truck	$	71,913	$	61,468
Power sports	42,170		30,404
Building products	29,440		29,158
Industrial and utilities	13,727		10,339
All other	25,968		16,882
Net product revenue	$	183,218	$	148,251

Gross margin was approximately 14.6% of sales for the six months ended June 30, 2022, compared with 17.3% for the six months ended June 30, 2021. The gross margin percentage decrease was negatively impacted by product mix and production inefficiencies of 2.3% and unfavorable net changes in selling price and raw material costs of 1.6%, offset by higher fixed cost leverage of 1.2%.

SG&A was $17,155,000 for the six months ended June 30, 2022, compared to $14,935,000 for the six months ended June 30, 2021. Increased SG&A expenses resulted primarily from higher labor and benefits costs of $1,229,000, increase in insurance costs of $358,000 and professional fees of $610,000.

Interest expense totaled $1,000,000 for the six months ended June 30, 2022, compared to interest expense of $1,163,000 for the six months ended June 30, 2021. The decrease in interest expense was primarily due to the Company receiving interest income

Table of Contents

of $128,000 related to an income tax refund and a lower average outstanding debt balance during the six months ended June 30, 2022, when compared to the same period in 2021.

Income tax expense for the six months ended June 30, 2022 is estimated to be $3,407,000, approximately 36.0% of income before income taxes, and includes tax expense in Canadian and Mexican tax jurisdictions. U.S. operations incurred a net loss for the six months ended June 30, 2022 and the net loss tax benefit was offset with a full valuation reserve. Income tax expense for the six months ended June 30, 2021 was estimated to be $2,894,000, approximately 27.7% of income before income taxes.

The Company recorded net income for the six months ended June 30, 2022 of $6,052,000 or $0.71 per basic and diluted share, compared with a net income of $7,542,000, or $0.89 per basic and diluted share, for the six months ended June 30, 2021.

Comprehensive income totaled $5,925,000 for the six months ended June 30, 2022, compared to comprehensive income of $7,414,000 for the same period ended June 30, 2021. The decrease was related to the decrease in net income of $1,490,000.

Liquidity and Capital Resources

The Company’s primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses, capital expenditures, repayments of debt, and acquisitions. The Company from time to time will enter into foreign exchange contracts and interest rate swaps to mitigate risk of foreign exchange and interest rate volatility. The Company had no outstanding foreign exchange contracts nor interest rate swaps as of June 30, 2022.

Cash provided by operating activities for the six months ended June 30, 2022 totaled $2,946,000. Net income of $6,052,000 positively impacted operating cash flows. Non-cash deductions of depreciation and amortization included in net income amounted to $6,219,000. Increased working capital decreased cash provided by operating activities by $10,582,000. The increase in working capital was primarily related to changes in accounts receivable and inventory, offset by a change in accounts payable.

Cash used in investing activities for the six months ended June 30, 2022 was $8,623,000, which related to purchases of property, plant and equipment. The Company anticipates spending up to $20,000,000 during 2022 on property, plant and equipment purchases for all of the Company's operations. The Company anticipates increasing production capacity through the completion of its DLFT capacity expansion in Matamoros, Mexico, which started in 2021, and the addition of one press in each of its Winona, Minnesota and Cobourg, Ontario Canada facilities. At June 30, 2022, purchase commitments for capital expenditures in progress were $5,923,000. The Company anticipates using cash from operations, its available revolving line of credit or equipment financing to fund capital investments.

Cash used for financing activities for the six months ended June 30, 2022 totaled $355,000, which primarily consisted of net revolving loan borrowings of $2,320,000, offset by scheduled repayments of principal on outstanding term loans of $2,193,000.

At June 30, 2022, the Company had $114,000 cash on hand, and has $24,278,000 of available revolving loans of which $6,744,000 is outstanding.

The Company is required to meet certain financial covenants included in the Credit Agreement (defined below), which covenants include a fixed charge coverage ratio. As of June 30, 2022, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described below. The Company refinanced its existing credit facilities on July 22, 2022 as further described below.

Management believes cash on hand, cash flow from operating activities, available borrowings under the Company's credit agreement and equipment financing for capacity expansion will be sufficient to meet the Company's current liquidity needs.

Term Loans

Wells Fargo Term Loans

Table of Contents

KeyBank National Association, and to pay certain fees and expenses associated with the financing. On July 22, 2022, all existing outstanding indebtedness of the Company owed to the Lenders was repaid in full as part of the refinancing further described below.

The WF Term Loans contains reporting, indebtedness, and financial covenants. The Company is in compliance with such covenants as of June 30, 2022.

FGI Equipment Finance LLC Term Loan

On October 20, 2020, the Company entered into a Master Security Agreement, among FGI Equipment Finance LLC, (“FGI”) the Company as debtor, and each of Core Composites Corporation, a subsidiary of the Company organized in Delaware, and CC HPM, S. de R.L. de C.V., a subsidiary of the Company organized in Mexico, as guarantors, for a term loan in the principal amount of $13,200,000 (the “FGI Term Loan”), which loan is evidenced by a Promissory Note, dated October 20, 2020, executed by the Company in favor of FGI. On October 27, 2020, FGI advanced to the Company $12,000,000 which proceeds were used to pay off the Company’s existing outstanding indebtedness with KeyBank National Association, and to pay certain fees and expenses associated with the transactions, and $1,200,000 which proceeds were used to fund a security deposit to be held by FGI. Interest on the FGI Term Loan is a fixed rate of 8.25% and is payable monthly. The security deposit of $1,200,000 is included in other assets in the Consolidated Balance Sheets. On July 22, 2022, all existing outstanding indebtedness of the Company owed to the FGI was repaid in full as part of the refinancing further described below.

Leaf Capital Funding

Revolving Loans

Wells Fargo Revolving Loan

Table of Contents

Association, and to pay certain fees and expenses associated with the financing. On July 22, 2022, all existing outstanding indebtedness of the Company owed under the WF Revolving Loan was repaid in full as part of the refinancing further described below.

The WF Revolving Loan contains the same covenants as the WF Term Loans.

Credit Refinancing

On July 22, 2022, the Company entered into a Credit Agreement (the “Huntington Credit Agreement”) with The Huntington National Bank (“Huntington”), as the sole lender, administrative agent, lead arranger and book runner. Pursuant to the terms of the Huntington Credit Agreement, Huntington made available to the Company secured loans (the “Huntington Loans”) in the maximum aggregate principal amount of $75,000,000, consisting of (i) a revolving loan commitment of $25,000,000 (approximately $13,689,000 of which was advanced to the Company on July 22, 2022), (ii) term loan commitments of $25,000,000 ($25,000,000 of which was advanced to the Company on July 22, 2022) and (ii) Capex loan commitments of $25,000,000 (none of which was advanced to the Company on July 22, 2022). The initial proceeds of the Huntington Loans were used in part to (i) repay all existing outstanding indebtedness of the Company owing to the Lenders under the Credit Agreement, FGI and Leaf Capital Funding and (ii) pay certain fees and expenses associated with the transactions contemplated by the Huntington Credit Agreement. Additional proceeds of the Huntington Loans will be used to finance the ongoing general needs of the Company. For information on the Huntington Loans, see Note 15 - Subsequent Events, to the consolidated financial statements included herein.

Bank Covenants

Off-Balance Sheet Arrangements

The Company did not have any significant off-balance sheet arrangements as of June 30, 2022 or December 31, 2021.

The Company did not have or experience any material changes outside the ordinary course of business as to contractual obligations, including long-term debt obligations, capital lease obligations, operating lease obligations, purchase obligations or other long term liabilities reflected in the Company’s Consolidated Balance Sheet under GAAP, as of June 30, 2022 and December 31, 2021.

Table of Contents

Critical Accounting Policies and Estimates

For information on critical accounting policies and estimates, see Note 2, "Critical Accounting Policies and Estimates," to the consolidated financial statements included herein.

Recent Accounting Pronouncements

For information on the impact of recently issued accounting pronouncements, see Note 3, "Recent Accounting Pronouncements," to the consolidated financial statements included herein.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Core Molding Technologies’ primary market risk results from changes in the price of commodities used in its manufacturing operations. Core Molding Technologies is also exposed to fluctuations in interest rates and foreign currency fluctuations associated with the Mexican Peso and Canadian Dollar. Core Molding Technologies does not hold any material market risk sensitive instruments for trading purposes. The Company may use derivative financial instruments to hedge exposure to fluctuations in foreign exchange rates and interest rates.

Core Molding Technologies has the following three items that are sensitive to market risks: (1) Revolving Loans and Term Loans under the Credit Agreement, some of which bear a variable interest rate; (2) foreign currency purchases in which the Company purchases Mexican Pesos and Canadian Dollars with United States Dollars to meet certain obligations; and (3) raw material purchases in which Core Molding Technologies purchases various resins, fiberglass, and metal components for use in production. The prices and availability of these materials are affected by the prices of crude oil, natural gas and other feedstocks, tariffs, as well as processing capacity versus demand.

Assuming a hypothetical 10% change in short-term interest rates, interest paid on the Term Loan would be impacted, as the interest rate on these loans is based upon LIBOR. It would not, however, have a material effect on earnings before tax.

Assuming a hypothetical 10% decrease in the United States Dollar to Mexican Peso and Canadian Dollar exchange rate, the Company would be impacted by an increase in operating costs, which would have an adverse effect on operating margins.

Assuming a hypothetical 10% increase in commodity prices, Core Molding Technologies would be impacted by an increase in raw material costs, which would have an adverse effect on operating margins.

Table of Contents

Item 4. Controls and Procedures

As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Company’s management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Company’s disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act was accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms. There were no changes in internal controls over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) that occurred in the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Table of Contents

Part II — Other Information

Item 1. Legal Proceedings

From time to time, the Company is involved in litigation incidental to the conduct of its business. The Company is presently not involved in any legal proceedings which in the opinion of management are likely to have a material adverse effect on the Company's consolidated financial position or results of operations.

Item 1A. Risk Factors

There have been no material changes in Core Molding Technologies' risk factors from those previously disclosed in Core Molding Technologies' Annual Report on Form 10-K for the year ended December 31, 2021.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

The Company repurchased 48,286 shares of our common stock during the three months ended June 30, 2022. All stock was purchased to satisfy tax withholding obligations upon vesting of restricted stock awards. Details of the repurchases of our common stock during the three months ended June 30, 2022, are included in the following table:


Period	Total Number of Shares Purchased	Average Price Paid per Share		Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs	Maximum Number that May Yet be Purchased Under the Plans or Programs
April 1 to 30, 2022	—	—		—	—
May 1 to 31, 2022	—	—		—	—
June 1 to 30, 2022	48,286	$	10.01	—	—

Item 3. Defaults Upon Senior Securities

None.

Item 4. Mine Safety Disclosures

None.

Item 5. Other Information

None.

Item 6. Exhibits

See Index to Exhibits.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

CORE MOLDING TECHNOLOGIES, INC.

Date:

August 9, 2022

By:

/s/ David L. Duvall

David L. Duvall

President, Chief Executive Officer, and Director

Date:

August 9, 2022

By:

/s/ John P. Zimmer

John P. Zimmer

Executive Vice President, Secretary, Treasurer and Chief Financial Officer

Table of Contents

INDEX TO EXHIBIT

Exhibit No.

Description

Location

3(a)(1)

Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996

Incorporated by reference to Exhibit 4(a) to Registration Statement on Form S-8 (Registration No. 333-29203)

3(a)(2)

Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996

Incorporated by reference to Exhibit 4(b) to Registration Statement on Form S-8 (Registration No. 333-29203)

3(a)(3)

Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002

Incorporated by reference to Exhibit 3(a)(4) to Quarterly Report on Form 10-Q for the quarter ended September 30, 2002

3(a)(4)

Certificate of Designation, Preferences and Rights of Series B Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on April 21, 2020

Incorporated by reference to Exhibit 3.1 to Form 8-K filed April 22, 2020

3(a)(5)

Certificate of Elimination of the Series A Junior Participant Preferred Stock as filed with the Delaware Sec. of State on April 1, 2021

Incorporated by reference to Exhibit 3(a)(5) to Form 8-K filed April 6, 2021

3(b)(1)

Amended and Restated By-Laws of Core Molding Technologies, Inc.

Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed January 4, 2008

3(b)(2)

Amendment No. 1 to the Amended and Restated By-Laws of Core Molding Technologies, Inc.

Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed December 17, 2013

31(a)

Section 302 Certification by David L. Duvall, President, Chief Executive Officer, and Director

Filed Herein

31(b)

Section 302 Certification by John P. Zimmer, Executive Vice President, Secretary, Treasurer, and Chief Financial Officer

Filed Herein

32(a)

Certification of David L. Duvall, Chief Executive Officer of Core Molding Technologies, Inc., dated August 9, 2022, pursuant to 18 U.S.C. Section 1350

Filed Herein

32(b)

Certification of John P. Zimmer, Executive Vice President, Secretary, Treasurer and Chief Financial Officer of Core Molding Technologies, Inc., dated August 9, 2022, pursuant to 18 U.S.C. Section 1350

Filed Herein

101.INS

XBRL Instance Document

Filed Herein

101.SCH

XBRL Taxonomy Extension Schema Document

Filed Herein

101.CAL

XBRL Taxonomy Extension Calculation Linkbase

Filed Herein

101.LAB

XBRL Taxonomy Extension Label Linkbase

Filed Herein

101.PRE

XBRL Taxonomy Extension Presentation Linkbase

Filed Herein

101.DEF

XBRL Taxonomy Extension Definition Linkbase

Filed Herein

104

Cover Page Interactive Data File (formatted in Inline XBRL and contained in Exhibit 101)

Filed Herein

Positive
Negative
Uncertain
Constraining
Legalese
Litigous
Readability	H.S. freshman Avg

Core Molding (CMT) 10-Q2022 Q2 Quarterly report

Content analysis