Materialise 20F 2021 Annual report

Materialise (MTLS) 20-F2021 FY Annual report (foreign)

Content analysis

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM

20-F

☐	REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR (g) OF THE SECURITIES EXCHANGE ACT OF 1934

☒	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

☐	SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number:

001-36515

MATERIALISE NV

(Exact name of Registrant as specified in its charter)

Not Applicable

(Translation of Registrant’s name into English)

Kingdom of Belgium

(Jurisdiction of incorporation or organization)

Technologielaan 15, 3001 Leuven, Belgium

(Address of principal executive offices)

Peter Leys, telephone +32 (16) 39 66 11, facsimile +32 (16) 39 66 00, Technologielaan 15, 3001 Leuven, Belgium

(Name, Telephone,

E-mail

and/or Facsimile number and Address of Company Contact Person)

Securities registered or to be registered pursuant to Section 12(b) of the Act:


Title of each class	Trading Symbol	Name of each exchange on which registered
American Depositary Shares, each representing one Ordinary Share, no nominal value per share	MTLS	The Nasdaq Stock Market LLC
Ordinary Shares, no nominal value per share *		The Nasdaq Stock Market LLC

*	Not for trading but only in connection with the registration of the American Depositary Shares pursuant to the requirements of the Securities and Exchange Commission.

Securities registered or to be registered pursuant to Section 12(g) of the Act: None.

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None.

The number of outstanding shares of each of the issuer’s classes of capital or common stock as of December 31, 2021 was: 59,063,521 Ordinary Shares

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐ Yes ☒ No

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934. ☐ Yes ☒ No

Note – Checking the box above will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒ Yes ☐ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation

S-T

(§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☒ Yes ☐ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a

non-accelerated

filer, or an emerging growth company. See the definition of “large accelerated filer,” “accelerated filer,” and “emerging growth company” in Rule

12b-2

of the Exchange Act.

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards† provided pursuant to Section 13(a) of the Exchange Act. ☐

†	The term “new or revised financial accounting standard” refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after April 5, 2012.

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:


U.S. GAAP ☐		International Financial Reporting Standards as issued by the International Accounting Standards Board ☒		Other ☐

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow. ☐ Item 17 ☐ Item 18

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule

12b-2

of the Exchange Act). ☐ Yes ☒ No

(APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY PROCEEDINGS DURING THE PAST FIVE YEARS)

Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13 or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court. ☐ Yes ☐ No

Table of Contents

TABLE OF CONTENTS


		Page
ITEM 1.	Identity of Directors, Senior Management and Advisers		3
ITEM 2.	Offer Statistics and Expected Timetable		4
ITEM 3.	Key Information		5
ITEM 4.	Information on the Company		32
ITEM 4A.	Unresolved Staff Comments		49
ITEM 5.	Operating and Financial Review and Prospects		50
ITEM 6.	Directors, Senior Management and Employees		71
ITEM 7.	Major Shareholders and Related Party Transactions		81
ITEM 8.	Financial Information		83
ITEM 9.	The Offer and Listing		84
ITEM 10.	Additional Information		85
ITEM 11.	Quantitative and Qualitative Disclosures About Market Risk		94
ITEM 12.	Description of Securities Other than Equity Securities		96
ITEM 13.	Defaults, Dividend Arrearages and Delinquencies		98
ITEM 14.	Material Modifications to the Rights of Security Holders and Use of Proceeds		99
ITEM 15.	Controls and Procedures		100
ITEM 16A.	Audit Committee Financial Expert		105
ITEM 16B.	Code Of Ethics		106
ITEM 16C.	Principal Accountant Fees and Services		107
ITEM 16D.	Exemptions from the Listing Standards for Audit Committees		108
ITEM 16E.	Purchases of Equity Securities by the Issuer and Affiliated Purchasers		109
ITEM 16F.	Change in Registrant’s Certifying Accountant		110
ITEM 16G.	Corporate Governance		111
ITEM 16H.	Mine Safety Disclosure		112
ITEM 16I.	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections		113
ITEM 17.	Financial Statements		115
ITEM 18.	Financial Statements		116
ITEM 19.	Exhibits		120

Table of Contents

INTRODUCTION

Except as otherwise required by the context, references to (i) “Materialise,” “Company,” “we,” “us” and “our” are to Materialise NV and its subsidiaries, (ii) “ACTech” are to ACTech Holding GmbH and its subsidiaries, which we acquired in 2017, (iii) “Engimplan” are to Engimplan Engenharia De Implante Indústria E Comércio Ltda., in which we acquired a controlling interest in 2019 and in which we acquired the remaining interest in 2020, making us Engimplan’s sole shareholder (through our Brazilian subsidiary), (iv) “Materialise Motion” are to Materialise Motion NV, a joint venture we established in 2014 under the name “RSPrint Powered by Materialise” NV and in which we acquired the remaining interest in 2020, together with substantially all of the assets of RSScan International NV, or RS Scan, making us Materialise Motion’s sole shareholder, and (v) “Link3D” are to Link3D Inc., which we acquired an option to buy in 2021, which we exercised in 2022.

Our trademark portfolio contained 185 registered trademarks and 1 pending trademark application as of December 31, 2021. All other trademarks or trade names referred to in this annual report are the property of their respective owners. Solely for convenience, the trademarks and trade names in this annual report are referred to without the

and

™

symbols, but such references should not be construed as any indicator that their respective owners will not assert, to the fullest extent under applicable law, their rights thereto.

All references in this annual report to “U.S. dollars” or “$” are to the legal currency of the United States and all references to “€” or “euro” are to the currency introduced at the start of the third stage of the European economic and monetary union pursuant to the treaty establishing the European Community, as amended.

SPECIAL NOTE REGARDING FORWARD-LOOKING INFORMATION

This annual report includes certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act, concerning our business, operations and financial performance and condition as well as our plans, objectives and expectations for our business operations and financial performance and condition. Any statements that are not of historical facts may be deemed to be forward-looking statements. You can identify these forward-looking statements by words such as “believes,” “estimates,” “anticipates,” “expects,” “plans,” “intends,” “may,” “could,” “might,” “will,” “should,” “aims,” or other similar expressions that convey uncertainty of future events or outcomes. Forward-looking statements appear in a number of places throughout this annual report and include statements regarding our intentions, beliefs, assumptions, projections, outlook, analyses or current expectations concerning, among other things, our intellectual property position, research and development projects, acquisitions, results of operations, cash needs, spending of the remaining net proceeds from our initial public offering, capital expenditures, financial condition, liquidity, prospects, growth and strategies, regulatory approvals and clearances, the markets and industry in which we operate and the trends and competition that may affect the markets, industry or us. In particular, under “Item 5. Operating and Financial Review and Prospects—D. Trend Information” of this annual report and in the notes to our audited consolidated financial statements, we discuss, based on our current assessment of the ongoing coronavirus disease 2019, or COVID-19, pandemic and the current armed conflict in Ukraine, how our business, results of operations, and financial condition could be impacted during the year 2021 and beyond.

By their nature, forward-looking statements involve risks and uncertainties because they relate to events, competitive dynamics and industry change, and depend on economic circumstances that may or may not occur in the future or may occur on longer or shorter timelines than anticipated. Although we believe that we have a reasonable basis for each forward-looking statement contained in this annual report, we caution you that forward-looking statements are not guarantees of future performance and involve known and unknown risks, uncertainties and other factors that are in some cases beyond our control. All of our forward-looking statements are subject to risks and uncertainties that may cause our actual results to differ materially from our expectations.

Actual results could differ materially from our forward-looking statements due to a number of factors, including, without limitation, risks related to:

•

our ability to enhance and adapt our software, products and services to meet changing technology and customer needs;

•

fluctuations in our revenue and results of operations;

•

impacts on our business, financial conditions and results of operations from the current armed conflict in Ukraine;

•

impacts on our business, financial condition and results of operations from the current global health crisis related to the COVID-19 pandemic;

•

our ability to operate in a highly competitive and rapidly changing industry;

•

our ability to adequately increase demand for our products and services;

•

our collaborations,

in-licensing

arrangements, joint ventures, strategic alliances or partnerships with third parties;

Table of Contents

•

our ability to integrate acquired businesses or technologies effectively;

•

our dependence upon sales to certain industries;

•

our relationships with suppliers;

•

our ability to attract and retain employees and contractors;

•

any disruptions to our service center operations, including by accidents, warfare, natural disasters or otherwise;

•

our ability to raise additional capital on attractive terms, or at all, if needed to meet our growth strategy;

•

our ability to adequately protect our intellectual property and proprietary technology;

•

our international operations;

•

our ability to comply with applicable governmental laws and regulations to which our products, services and operations are subject; and

•

other risk factors as set forth under “Item 3. Key Information – D. Risk Factors.”

Any forward-looking statements that we make in this annual report speak only as of the date of such statement, and we undertake no obligation to update such statements to reflect events or circumstances after the date of this annual report or to reflect the occurrence of unanticipated events. Comparisons of results for current and any prior periods are not intended to express any future trends or indications of future performance, unless expressed as such, and should only be viewed as historical data. You should, however, review the factors and risks we describe in the reports we will file from time to time with the U.S. Securities and Exchange Commission, or the SEC, after the date of this annual report. See “Item 10. Additional Information – H. Documents on Display.”

You should also read carefully the factors described in “Item 3. Key Information – D. Risk Factors” and elsewhere in this annual report to better understand the risks and uncertainties inherent in our business and underlying any forward-looking statements. As a result of these factors, we cannot assure you that the forward-looking statements in this annual report will prove to be accurate. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans in any specified timeframe, or at all.

Table of Contents

PART I

ITEM 1.

IDENTITY OF DIRECTORS, SENIOR MANAGEMENT AND ADVISERS

Not applicable.

Table of Contents

ITEM 2.

OFFER STATISTICS AND EXPECTED TIMETABLE

Not applicable.

Table of Contents

ITEM 3.

KEY INFORMATION

A.	[Reserved]

B.	Capitalization and Indebtedness

Not applicable.

C.	Reasons for the Offer and Use of Proceeds

Not applicable.

D.	Risk Factors

Summary of Risk Factors

Risks Relating to the

COVID-19

Pandemic

•

The ongoing COVID-19 global health crisis adversely impacted our business and results of operations in 2021 and may continue to have a material adverse impact on our business, results of operations, financial condition, cash flows or liquidity.

Risks Relating to Our Business

•

We may not be able to maintain or increase the market share or reputation of our software and other products and services that they need to remain or become a market standard.

•

We may not be successful in continuing to enhance and adapt our software, products and services in line with developments in market technologies and demands.

•

The research and development programs that we are currently engaged in, or that we may establish in the future, may not be successful and our significant investments in these programs may be lost.

•

Existing and increased competition may reduce our revenue and profits.

•

We rely on collaborations with users of our additive manufacturing solutions to be present in certain large-scale markets and, indirectly, to expand into potentially high-growth specialty markets. Our inability to continue to develop or maintain these relationships in the future could harm our ability to remain competitive in existing markets and expand into other markets.

•

Our revenue and results of operations may fluctuate.

•

Demand for additive manufacturing generally and our additive manufacturing software solutions, products and services in particular may not increase adequately.

•

We are dependent upon sales to certain industries.

•

If our relationships with suppliers, including with limited source suppliers of consumables, were to terminate or our manufacturing arrangements were to be disrupted, our business could be adversely affected.

•

The dominant software subscription model in the industrial sector is changing, and we may not be successful in developing a cloud-based platform to offer our software.

•

We depend on the knowledge and skills of key personnel throughout our entire organization, and if we are unable to retain and motivate them or recruit additional qualified personnel, our operations could suffer.

•

We may need to raise additional capital from time to time in order to meet our growth strategy and may be unable to do so on attractive terms, or at all.

•

As a result of the armed conflict in Ukraine, we have ceased our operations in our office in Kyiv.

•

Our international operations subject us to various risks, and our failure to manage these risks could adversely affect our results of operations.

•

We may engage in acquisitions or investments that could disrupt our business, cause dilution to our shareholders and harm our financial condition and results of operations.

•

We may enter into collaborations,

in-licensing

arrangements, joint ventures, strategic alliances or partnerships with third parties that may not result in the development of commercially viable products or the generation of significant future revenue.

•

Failure to comply with applicable anti-corruption and trade sanctions legislation could result in fines, criminal penalties and an adverse effect on our business.

•

Errors or defects in our software or other products could cause us to incur additional costs, lose revenue and business opportunities, damage our reputation and expose us to potential liability.

•

We rely on our information technology systems to manage numerous aspects of our business and customer and supplier relationships, and a disruption of these systems could adversely affect our results of operations.

•

A breach of security in our products or computer systems may compromise the integrity of our products, harm our reputation, create additional liability and adversely impact our financial results.

•

If our service center operations are disrupted, sales of our 3D printing services, including the medical devices that we print, may be affected, which could have an adverse effect on our results of operations.

Risks Related to Our Materialise Medical Segment and Regulatory Environment

•

Our medical business, financial condition, results of operations and cash flows could be significantly and negatively affected by substantial government regulations.

Table of Contents

Risks Related to Our Intellectual Property

•

If we are unable to obtain patent protection for our products or otherwise protect our intellectual property rights, our business could suffer.

•

We cannot predict the outcome of an arbitration proceeding in which we are involved.

Risks Related to the American Depositary Shares (ADSs)

•

We do not expect to be a passive foreign investment company for U.S. federal income tax purposes; however, there is a risk that we may be classified as a passive foreign investment company, which could result in materially adverse U.S. federal income tax consequences to U.S. investors.

Risks Relating to the

COVID-19

Pandemic

The worldwide COVID-19 pandemic has negatively impacted the global, U.S. and E.U. economies, disrupted consumer spending and global supply chains, and created significant volatility and disruption of labor and financial markets since the first quarter of 2020. In response to the ongoing COVID-19 pandemic, governments worldwide have, at various times, closed business, restricted travel, implemented emergency quarantines, imposed social distancing measures and adopted testing and vaccine mandates, and businesses and individuals have reduced travel, cancelled meetings and events and implemented work-from-home policies, which have caused significant disruption to the global economy and normal business operations. The ongoing COVID-19 pandemic may continue have broader macroeconomic implications, including a decrease in or halt to economic growth, the effects of which could be long lasting.

In an effort to protect the health and safety of employees, we, and many of our customers, partners, suppliers and other counterparties, currently require that employees work, at least partially, from home and restrict travel as much as possible, which affects, among other things, our and their ability to engage in production and research and development activities, to attend industry events and to engage in commercial visits. In particular, during the first half of 2021, the economic downturn resulting from the COVID-19 pandemic caused a significant reduction in demand for services, production and investments, and affected our global operations negatively. In the event we or our customers, partners, suppliers and other counterparties continue to maintain, expand or

re-introduce

all or certain of these restrictions and measures, we may suffer further disruptions to business operations, including the closure of manufacturing facilities, warehouses and logistics supply chains worldwide. Furthermore, the COVID-19 and the responses thereto could have a range of other effects on us. For example, the implementation of business continuity plans in a fast-moving public health emergency could have an adverse effect on our internal controls (potentially giving rise to significant deficiencies or material weaknesses) and increase our vulnerability to information technology and other systems disruptions.

In particular, during the first half of 2021, the ongoing COVID-19 pandemic negatively affected the results of operations in our Materialise Software and Materialise Manufacturing segments. As of the date of this report, we are unable to predict the duration and severity of the ongoing COVID-19 pandemic and the political and economic responses thereto and, as a result, we are unable to assess with certainty its impact on our business and operations, results of operations, financial condition, cash flows and liquidity during 2022 and beyond. The COVID-19 pandemic and related responses have and may continue to evolve, making their impact highly uncertain, and are subject to many factors beyond our control, such as the outbreak of new variants of the virus, the speed of contagion, the implementation of effective preventative and containment measures, the impact of the existing or future vaccination programs and the development of other effective medical solutions, the timing and scope of governmental restrictions on public gatherings, mobility and other activities, financial and other market reactions, and reactions and responses of the public. In particular, although we have included under “Item 5. Operating and Financial Review and Prospects—D. Trend Information” of this annual report and in the notes to our audited consolidated financial statements a discussion, based on our current assessment of the

COVID-19

pandemic, of how our business, results of operations, and financial condition could be impacted during the year 2022, this discussion should be considered as highly uncertain. While we expect we will continue to suffer adverse effects, the more severe the outbreak is and the longer it lasts, the more likely it is that the effects on us and our business will be materially adverse.

Risks Relating to Our Business

We may not be able to maintain or increase the market share or reputation of our software and other products and services that they need to remain or become a market standard.

The additive manufacturing, or 3D printing, industry is rapidly growing on a global scale and is subject to constant innovation and technological change. A variety of technologies compete against one another in our market, which is driven, in part, by technological advances and

end-user

requirements and preferences, as well as by the emergence of new standards and practices. As the additive manufacturing market evolves, the industry standards that are adopted and adhered to are a function of the inherent qualities of the technology as well as the willingness of members of the industry to adopt them. To remain competitive, we depend in large part on our ability to increase and maintain market share and influence in the industry in order to be recognized as a market standard. Nonetheless, in the future, our influence in setting standards for the additive manufacturing industry may be limited and the standards adopted by the market may not be compatible with our present or future products and services.

Table of Contents

We may not be successful in continuing to enhance and adapt our software, products and services in line with developments in market technologies and demands.

Our present or future software, products and services could be rendered obsolete or uneconomical by technological advances by one or more of our present or future competitors, by other technologies or by new customer needs. Our ability to remain competitive will depend, in large part, on our ability to enhance and adapt our current software, product and services to developments in technologies and to new and changing customer needs (in particular in relation to the manufacturing of end parts and the offering of cloud-based software solutions). We believe that to remain competitive we must continuously enhance and expand the functionality and features of our products, services and technologies. However, there can be no assurance that we will be able to:

•

maintain and enhance the market share of our current products, services and technologies;

•

enhance our existing product, services and technologies;

•

develop new products, services and technologies that address the increasingly sophisticated and varied needs of prospective

end-users

(including in the emerging market of using additive manufacturing for end parts instead of prototypes and the trend of offering more cloud-enabled software solutions);

•

respond to technological advances and emerging industry standards and practices on a cost-effective and timely basis;

•

adequately protect our intellectual property as we develop new products, services and technologies and anticipate intellectual property claims from third parties; or

•

integrate the product portfolio of Link3D into our own product portfolio.

Table of Contents

The research and development programs that we are currently engaged in, or that we may establish in the future, may not be successful and our significant investments in these programs may be lost.

To remain competitive, we invest, and intend to continue to invest, significant amounts in various research and development programs. There can be no assurances, however, that these research and development programs will improve our existing additive manufacturing software solutions, products and services or create new software, products or services. Even if some of these programs are successful, it is possible that the new software, products or services developed from such programs will not be commercially viable, that new 3D printing technologies that we, or others, develop will eventually supplant our current 3D printing technologies, that changes in the manufacturing or use of 3D printers will adversely affect the need or demand for our software, products or services or that our competitors will create or successfully market 3D printing technologies that will replace our solutions, products and services in the market. As a result, any of our software solutions, products or services may be rendered obsolete or uneconomical and our significant investments in all or some of our research and development programs may be lost.

Existing and increased competition may reduce our revenue and profits.

The market segments in which we operate, Materialise Software, Materialise Medical and Materialise Manufacturing, are characterized by vigorous competition, by entry of competitors with innovative technologies, by consolidation of companies with complementary products, services and technologies, and by entry of large corporations in any one or more of our market segments.

In particular, the barriers to enter the software, medical and industrial markets with 3D printing solutions are decreasing rapidly.

In the Materialise Software segment, the availability of computing devices with continually expanding performance at progressively lower prices contributes to the ease of market entry. Additionally, there are certain open-source software applications that are being offered free of charge or for a nominal fee that can place additional competitive pressure on us. 3D printer manufacturers, which closely work with their customers, may also successfully bundle their own software solutions with their equipment, which may make our independent software solutions obsolete. In addition, companies that have greater financial, technical, sales and marketing and other resources, including market leaders with significant

in-house

capacities in software development, or existing computer-aided design, or CAD, or computer-aided manufacturing, or CAM, or manufacturing execution system, or MES, software providers, are entering the additive manufacturing market and may very rapidly gain a significant share of the markets that we target (including through the acquisition of startup and

scale-up

companies that are active in the development and sale of additive manufacturing software tools).

In the Materialise Medical segment, medical device companies are investing in 3D printing solutions that may compete with our software solutions, products and services. Companies that initially rely on us to enter the additive manufacturing market for medical applications may, as they gain experience and as 3D printing technology gains strategic importance, decide to develop their

own in-house solutions

and enter the market themselves with their own software, products or services, thus becoming competitors and denying us continued access to their distribution channels. In addition, startup and

scale-up

companies, as well as companies that have greater financial, technical, sales and marketing and other resources, are entering the additive manufacturing market and may very rapidly gain a significant share of the markets that we target.

In the Materialise Manufacturing segment, as additive manufacturing gains importance as a strategic technology, our customers are likely to bring 3D

manufacturing in-house and

reduce or even discontinue using our 3D printing services. In addition, competitors with more efficient or profitable business models, superior techniques or more advanced technologies may take market share away from us. Also, in certain specific markets that our Materialise Manufacturing segment targets, including, among others, the shoe wear, eyewear and fixtures markets, established players may develop their own competitive solutions or may engage in collaborations with competitors of ours, preventing us from gaining a viable position in these markets.

Because of these and other factors, competitive conditions in the industry are likely to intensify in the future. Increased competition could result in price reductions, reduced revenue and operating margins and loss of market share, any of which would likely harm our results of operations.

Our strategy includes entering into collaborations with our customers in certain large-scale markets and leveraging these collaborations to enter into other underserved specialty markets. In the medical market, we have entered into collaborations with DePuy Synthes Companies of Johnson & Johnson, or DePuy Synthes, and Zimmer Biomet Holdings, Inc., or Zimmer Biomet, as well as with Encore Medical, L.P. (d/b/a DJO Surgical), or DJO Surgical, Limacorporate Spa, or Lima, Mathys AG, or Mathys (which is now part of the same group as DJO Surgical), Smith & Nephew Inc., or Smith & Nephew, Corin Ltd, or Corin, Medtronic Inc., or Medtronic, and Abbott Laboratories Inc., or Abbott. Increased adoption of our software, products and services, especially in potentially high-growth specialty markets, will depend in part on our current and future collaborators’ willingness to continue to adopt our additive manufacturing solutions in their markets and on our ability to continue to collaborate with these and other players. Certain of our customers that have initially relied on our 3D printing software and services have announced their intention to bring their 3D printing operations

in-house

and enter the market themselves, and other customers may also do so in the future as they gain experience and as 3D printing technology gains strategic importance, thus denying us continued access to their distribution channels. In addition, a change of control of any of our collaboration partners may negatively impact our relationship. If we are not able to maintain our existing collaborations and develop new collaborative relationships, our foothold in larger markets and expansion into potentially high-growth specialty markets could be harmed significantly.

Table of Contents

Our revenue and results of operations may fluctuate.

Our revenue and results of operations may fluctuate from

quarter-to-quarter

and

year-to-year

and are likely to continue to vary due to a number of factors, many of which are not within our control. You should not rely on our past results as an indication of our future performance.

Fluctuations in our results of operations and financial condition may occur due to a number of factors, including, but not limited to, those listed below and those identified throughout this annual report:

•

our ability to continue, renew or replace relationships with key customers;

•

the degree of market acceptance of our software and our products;

•

the mix of software, products and services that we sell during any period, as well as the mix of the various markets in which we make sales during said periods;

•

a decline in new or renewed periodic licenses or maintenance contracts;

•

delays in the introduction of new features;

•

the entry of new competitors into our market;

•

the development and degree of market acceptance of new competitive systems or processes by others;

•

changes in our pricing policies or those of our competitors, including our responses to price competition;

•

changes in the amount we spend in our marketing and other efforts;

•

delays between our expenditures to develop, acquire or license new technologies and processes, and the generation of sales related thereto;

•

the amounts we spend on, and the success rate of, our research and development activities;

•

changes in the regulatory environment, including changes in regulatory laws and regulations and the interpretation thereof, applicable to our software programs, products or services;

•

delays in obtaining regulatory approval for our products, services or software programs;

•

interruptions to or other problems with our website and interactive user interface, information technology systems, manufacturing processes or other operations;

•

general economic and industry conditions that affect

end-user

demand and

end-user

levels of product design and manufacturing, including the adverse effects of global economic uncertainties such as the global economic uncertainty related to the ongoing COVID-19 pandemic or the armed conflict in Ukraine; and

•

changes in accounting rules and tax laws.

Inflation might have an adverse effect on our results.

From a macro-economic perspective, prior to 2021, inflation had remained well under control. However, inflation and labor expenses have risen rapidly over the course of 2021, both inside and outside the Eurozone, and have continued to increase in 2022. We believe it will be challenging to keep sales prices for our products and services aligned with increasing salaries in general (and in Belgium in particular, where salaries are indexed to inflation increases by law) as well as increasing costs of materials, energy and services, and capital expenditures. We have taken and are continuing to take action to mitigate the effects of inflation. There is no guarantee that any actions we take to manage inflation or increased labor costs will mitigate the adverse impact that rising inflation and increased labor costs could have on our results of operations, financial condition or cash flows.

Demand for additive manufacturing generally and our additive manufacturing software solutions, products and services in particular may not increase adequately, or at all.

The industrial and medical industries are generally dominated by conventional production methods with limited use of additive manufacturing technology in certain specific instances. If additive manufacturing technology, in particular, but not limited to, for the production of end parts, does not gain more mainstream market acceptance, or gains market acceptance at a significantly slower pace than currently expected, or if the marketplace adopts additive manufacturing based on a technology other than the technologies that we currently use or serve (including in the medical, eyewear, footwear and fixtures markets that we target), we may not be able to meet our growth objectives or increase or sustain the level of sales of our additive manufacturing software solutions, products and services, and our results of operations would be adversely affected as a result.

Table of Contents

We are dependent upon sales to certain industries.

Our revenue from products is currently relatively concentrated in the industrial and medical industries, and particularly in the automotive and orthopedic/cranio-maxillofacial segments within such industries, respectively, and we expect additional growth to come from certain other specific markets, such as the aerospace, eyewear and footwear markets. To the extent any of these industries experience, or continue to experience, a downturn, our results of operations may be adversely affected. Additionally, if any of these industries or their respective suppliers or other providers of manufacturing services develop new technologies or alternatives to manufacture the products that are currently manufactured using our 3D printing software, products and services, it may adversely affect our results of operations.

We purchase consumables and other components that are used in our production from third party suppliers. We currently use only a limited number of suppliers for several of the raw materials that we use for our printing activities. Our reliance on a limited number of vendors involves a number of risks, including:

•

potential shortages of some key consumables or other components;

•

printed material performance or quality shortfalls, if traceable to particular consumables or other components, since the supplier of the faulty consumable or component cannot readily be replaced;

•

discontinuation of a consumable or other component on which we rely;

•

potential insolvency of these vendors; and

•

reduced control over delivery schedules, manufacturing capabilities, quality and costs.

If certain suppliers were to decide to discontinue production, or the supply to us, of a consumable or other component that we use, the unanticipated change in the availability of supplies, or unanticipated supply limitations, could cause delays in, or loss of, sales, increased production or related costs and, consequently, reduced margins, and damage to our reputation. In addition, because we use a limited number of suppliers, increases in the prices charged by our suppliers may have an adverse effect on our results of operations, as we may be unable to find a supplier who can supply us at a lower price. As a result, the loss of a limited source supplier could adversely affect our relationships with our customers and our results of operations and financial condition.

The dominant software subscription model in the industrial sector is changing, and we may not be successful in developing a cloud-based platform to offer our software.

We offer most of our current software products through

on-premises

licensing (either on a perpetual or annual basis). We believe the industrial software market is evolving to SaaS (Software as a Service) and other cloud-based models of software deployment where software providers typically license their applications to customers for use as a service on demand through web browser technologies. While we are deploying an increasing number of cloud-enabled platform components, and are in the process of integrating the recently acquired Link3D platform into a unified additive manufacturing platform to offer our software products either by means of a SaaS or a cloud-based subscription model, there is no guarantee that we will be able to complete this integration successfully or in a timely manner or that our platform will be adopted by customers over other platforms.

A SaaS or cloud-based “pay per use” software offering differs significantly from the perpetual and annual licensing models that we currently offer. An increase in the prevalence of SaaS and cloud-based delivery models offered by us or our competitors could unfavorably impact the pricing of our

on-premises

software offerings and have a dampening impact on overall demand for our

on-premises

software product offerings, which could reduce our revenues and profitability. In addition, to the extent that demand for our SaaS or cloud-based offerings increases in the future, we may experience volatility in our reported revenues and operating results due to the differences in timing of revenue recognition between our perpetual and annual software licenses and our SaaS and cloud-based offering arrangements.

Furthermore, any SaaS or cloud-based software products we offer may reside upon and be hosted by third party providers. A security breach, whether of our products, of our customers’ network security and systems or of third party hosting services, could disrupt access to our customers’ stored information and could lead to the loss of, damage to or public disclosure of our customers’ stored information.

Table of Contents

Our success depends upon the continued service and performance of key personnel at all levels within our organization, including machine operators, engineers, designers, software developers, salespeople, product managers and senior management, and our ability to identify, hire, develop, motivate and retain qualified personnel in the future. Competition for key employees in our industry is intense and we cannot guarantee that we will be able to retain our personnel or attract new, qualified personnel. We may need to invest significant amounts of cash and equity to attract and retain new employees and we may not realize returns on these investments. The loss of the services of key personnel could prevent or delay the implementation and completion of our strategic objectives, could divert management’s attention to seeking certain qualified replacements or could adversely affect our ability to manage our company effectively. Each member of our personnel may resign at any time. Only some of the members of our personnel are subject to

non-competition

agreements, which may also be difficult to enforce. Accordingly, the adverse effect resulting from the loss of certain member of our key personnel could be compounded by our inability to prevent them from competing with us. We do not carry

key-man

insurance on any member of our senior management team or other key personnel. If we lose the ability to hire and retain key executives and employees with a diversity and high level of skills in appropriate domains (such as research and development and sales), it could have a material adverse impact on our business activities and results of operations.

In addition, the success of our acquisitions may depend in part on our ability to retain senior management and other key personnel of the acquired company following the acquisition and to continue to attract such persons to our company. For example, the companies we acquire may depend on small teams of founders and senior managers with extensive market knowledge and relationships or that exercise substantial influence over the acquired business. As result, the loss of such persons could adversely affect us.

We may need to raise additional capital from time to time in order to meet our growth strategy and may be unable to do so on attractive terms, or at all.

We intend to continue to make investments to support the growth of our business and may require additional funds to respond to business challenges, including the need to implement our growth strategy, increase market share in our current markets or expand into other markets, or broaden our technology, intellectual property or service capabilities. Accordingly, we may require additional investments of capital from time to time, and our existing sources of cash and any funds generated from operations may not provide us with sufficient capital. For various reasons, including any noncompliance with existing or future lending arrangements, additional financing, may not be available when needed, or may not be available on terms favorable to us. If we fail to obtain adequate capital on a timely basis or if capital cannot be obtained on terms satisfactory to us, we may not be able to achieve our planned rate of growth, which will adversely affect our results of operations.

Table of Contents

Our international operations subject us to various risks, and our failure to manage these risks could adversely affect our results of operations.

We face significant operational risks as a result of doing business internationally, including, among others:

•

fluctuations in foreign currency exchange rates;

•

potentially longer sales and payment cycles;

•

potentially greater difficulties in collecting accounts receivable;

•

potentially adverse tax consequences, including liabilities imposed from inconsistent enforcement;

•

challenges in providing solutions across a significant distance, in different languages and among different cultures;

•

the impact of global public health crises, such as the ongoing impact of the COVID-19 pandemic on almost all large economies worldwide;

•

transportation delays;

•

becoming subject to the different, complex and changing laws, regulations and court systems of multiple jurisdictions and compliance with a wide variety of foreign laws, treaties and regulations;

•

reduced protection of, or significant difficulties in enforcing, intellectual property rights in certain countries;

•

difficulties in staffing and managing foreign operations, particularly in new geographic locations;

•

restrictions imposed by local labor practices and laws on our business and operations, including unilateral cancellation or modification of contracts;

•

expropriation or nationalization of property;

•

rapid changes in government, economic and political policies and conditions, political or civil unrest or instability, terrorism or pandemics, epidemics and other similar outbreaks or events, such as the armed conflict in Ukraine;

•

operating in countries with a higher incidence of corruption and fraudulent business practices;

•

seasonal reductions in business activity in certain parts of the world, particularly during the summer months in Europe;

•

costs and difficulties of customizing products for foreign countries; and

•

tariffs, trade barriers and other regulatory or contractual limitations on our ability to sell or develop our products in certain foreign markets.

We maintain an important software research and development and engineering center in Malaysia. In Malaysia, the government may exercise substantial control over certain sectors of the economy through regulation and state ownership. Changes in the laws and regulations of Malaysia, or in their interpretation or enforcement, including with respect to operations such as ours, which rely to a large extent on local private entrepreneurs, may significantly impact our activities in Malaysia, which would limit our future growth and adversely affect our results of operations.

In addition, in August 2019, we acquired a 75% interest in Engimplan, a

Brazil-based

manufacturer of orthopedic and cranio-maxillofacial (CMF) implants and instruments and in December 2020, we acquired the remaining 25% interest in Engimplan, making us Engimplan’s sole shareholder (through our Brazilian subsidiary). Brazil has experienced recent political and economic uncertainty and instability, including as a result of country-wide money laundering and corruption probes. Our failure to manage the market and operational risks associated with our international operations effectively could limit the future growth of our business and adversely affect our results of operations.

As a result of the armed conflict in Ukraine, we have ceased our operations in our office in Kyiv.

We historically have maintained an office in Kyiv, Ukraine from which we provided internal medical and software development services and supporting activities for our global operations. On February 24, 2022, the Russian Federation invaded Ukraine and, as a result, our operations in Kyiv have come to a standstill.

While some of our personnel have remained in Kyiv, most have fled the city, either to other parts of Ukraine or to Ukraine’s neighboring countries, with many of our personnel relocating to our office in Wroclaw, Poland. As of the date of this report, although most of our personnel continue working for us, either from our Wroclaw office or remotely, others remain unable to perform their work. Despite our initiating an intense relocation and support program, it is impossible to determine how much of our Ukrainian workforce will be able or willing to continue working for us. Furthermore, we have incurred and will continue to incur expenses related to these relocation and support efforts, the extent of which we cannot estimate.

Table of Contents

The cessation of our Kyiv office’s operations impacts the services that we provide to customers globally, and has necessitated a recalibration of the development timelines of certain of our software products. In addition, although only a small percentage of our historical revenues was generated in Russia, we expect that the trade sanctions that have been imposed against Russia by, among others, the United States and the European Union, will have an impact on our sales.

As of the date of this report, we are unable to predict how the armed conflict in Ukraine will evolve and what the political and economic repercussions will be. As a result, we are unable to assess with certainty its impact on our business and operations, results of operations, financial condition, cash flows and liquidity. In particular, although we have included under “Item 5. Operating and Financial Review and Prospects—D. Trend Information” of this annual report and in the notes to our audited consolidated financial statements a discussion, based on our current assessment of the armed conflict in Ukraine, of how our business, results of operations, and financial condition could be impacted during the year 2022, this discussion should be considered as highly uncertain. While we expect we will suffer adverse effects, the severity is currently impossible to assess.

Our international operations pose currency risks, which may adversely affect our results of operations and net income.

Our results of operations may be affected by volatility in currency exchange rates and our ability to effectively manage our currency transaction risks. In general, we conduct our business, earn revenue and incur costs in the local currency of the countries in which we operate. During the year ended December 31, 2021, 65% of our revenue was generated, and approximately 75% of our total costs were incurred in euros. As we continue to expand internationally, our exposure to currency risks will increase. Historically, although we seek to monitor the ratio of revenues to expenses in certain foreign currencies, we have not managed all our foreign currency exposure in a manner that would eliminate the effects of changes in foreign exchange rates. Changes in exchange rates between the foreign currencies in which we do business and the euro will affect our revenue, cost of sales, and operating margins, and could result in exchange losses in any given reporting period.

Changes in tax laws, treaties or regulations could adversely affect our financial results.

Our future effective tax rates could be adversely affected by changes in tax laws, treaties and regulations, both internationally and domestically, including possible changes to the patent income deduction and innovation income deduction regime in Belgium or the way it proportionately impacts our effective tax rate. An increase of our future effective tax rates could have a material adverse effect on our business, financial position, results of operations and cash flows.

We may engage in acquisitions or investments that could disrupt our business, cause dilution to our shareholders and harm our financial condition and results of operations.

We have in the past and intend to continue to evaluate opportunities to acquire or invest in, companies that we believe have products, services, competencies or capabilities that are a strategic or commercial fit with any of our businesses or that otherwise offer opportunities for our company.

In connection with acquisitions or investments, we may:

•

issue American Depositary Shares, or ADSs, or other forms of equity that would dilute our existing shareholders’ percentage of ownership;

•

incur debt and assume liabilities; and/or

•

incur amortization expenses related to intangible assets or incur large and immediate write-offs.

If we complete an acquisition or investment, we cannot assure you that it will ultimately strengthen our competitive position or that it will be viewed positively by customers, suppliers, employees, financial markets or investors. Furthermore, future acquisitions or investments could pose numerous additional risks to our operations, including:

•

problems integrating the purchased business, products, services or technologies;

•

challenges in achieving strategic objectives, cost savings and other anticipated benefits;

•

increases to our expenses;

•

the potential write down of assets or goodwill acquired in the context of an acquisition or investment;

•

due diligence investigations failing to discover undisclosed liabilities or risks affecting the acquired businesses;

Table of Contents

•

the assumption of significant liabilities that exceed the limitations of any applicable indemnification provisions or the financial resources of any indemnifying party;

•

inability to maintain relationships with key customers, vendors and other business partners of our current or acquired businesses;

•

diversion of management’s attention from their

day-to-day

responsibilities;

•

difficulty in maintaining controls, procedures and policies during the transition and integration;

•

entrance into marketplaces where we have no or limited prior experience and where competitors have stronger marketplace positions;

•

potential loss of key employees, particularly those of the acquired entity; and

•

historical financial information may no longer be representative or indicative of our results as a combined company.

Alternatively, while certain acquisitions or investments may be of strategic importance for the execution of our business plan, we may not ultimately be able to complete such acquisitions or investments on favorable terms, or at all, which may in turn materially affect our ability to grow or even cause us to lose market share, and could have a material adverse effect on our business, financial condition and results of operations.

We may enter into collaborations,

in-licensing

In the ordinary course of our business, we may enter into collaborations,

in-licensing

arrangements, joint ventures, strategic alliances or partnerships to develop proposed products or services and to pursue new markets. For example, in the Materialise Medical segment, we have collaborations with leading medical device companies and academic institutions for the development and distribution of our surgical planning software, services, and products, including with DePuy Synthes, Zimmer Biomet, DJO Surgical, Lima, Medtronic, Abbott, Corin, Mathys and the University of Michigan. Furthermore, in the Materialise Software segment, we have established collaborations with Siemens PLM, or Siemens and, in the Materialise Manufacturing segment, we have established collaborations with HOYA Vision Care Company, or HOYA, PTC Inc., or PTC, and BASF 3D Printing Solutions GmbH. Proposing, negotiating and implementing collaborations,

in-licensing

arrangements, joint ventures, strategic alliances or partnerships may be a lengthy and complex process. Other companies, including those with substantially greater financial, marketing, sales, technology or other business resources, may compete with us for these opportunities or arrangements. We may not succeed in maintaining, renewing or extending existing collaborations or in identifying, securing, or completing any such new transactions or arrangements in a timely manner, on a cost-effective basis, on acceptable terms or at all. We may also not realize the anticipated benefits of any such transaction or arrangement. In particular, these collaborations may not result in the development of products or services that achieve commercial success or result in significant revenue and could be terminated prior to developing any products or services.

Additionally, we may not be in a position to exercise sole decision making authority regarding the transaction or arrangement, which could create the potential risk of creating impasses on decisions, and our collaboration partners may have economic or business interests or goals that are, or that may become, inconsistent with our economic or business interests or goals. It is possible that conflicts may arise with our current or future collaboration partners, such as conflicts concerning the achievement of performance milestones, or the interpretation of terms under any agreement, such as those related to financial obligations, the ownership or license rights or control of intellectual property developed before or during the collaboration or indemnification. If any conflicts arise with our current or future collaboration partners, they may act in their self-interest, which may be adverse to our best interest, and they may breach their obligations to us. In addition, we have limited control over the amount and timing of resources that our current collaboration partners or any future collaboration partners devote to our collaboration partners’ or our future products or services. Disputes with our collaboration partners may result in litigation or arbitration that would increase our expenses and divert the attention of our management. For example, we are currently involved in an arbitration dispute with Zimmer Biomet regarding certain alleged indemnification obligations. Further, these transactions and arrangements are contractual in nature and may be terminated or dissolved under the terms of the applicable agreements and, in such event, we may not continue to have rights to the products or access to the markets relating to such transaction or arrangement or may need to purchase such rights at a premium.

Failure to comply with applicable anti-corruption and trade sanctions legislation could result in fines, criminal penalties and an adverse effect on our business.

We operate in a number of countries throughout the world and we are committed to doing business in accordance with applicable anti-corruption laws. We are subject, however, to the risk that our officers, directors, employees, agents and collaboration partners may take action determined to be in violation of such anti-corruption laws, including the U.S. Foreign Corrupt Practices Act of 1977, the U.K. Bribery Act 2010 and the Belgian Penal Code, as well as trade sanctions administered by the Office of Foreign Assets Control and the U.S. Department of Commerce. Any such violation could result in substantial fines, sanctions, civil and/or criminal penalties or curtailment of operations in certain jurisdictions, and might adversely affect our results of operations. In addition, actual or alleged violations could damage our reputation and ability to do business.

Table of Contents

Errors or defects in our software or other products could cause us to incur additional costs, lose revenue and business opportunities, damage our reputation and expose us to potential liability.

Sophisticated software and complex 3D printed products may contain errors, defects or other performance problems at any point in the life of the product. If errors or defects are discovered in our current or future software or other products, we may not be able to correct them in a timely manner, or provide an adequate response to our customers. We may therefore need to expend significant financial, technical and management resources, or divert some of our development resources, in order to resolve or work around those defects. We may also experience an increase in our service and warranty costs. Particularly in the medical sector, errors or defects in our software or products could lead to claims by patients against us and our customers and expose us to lawsuits that may damage our and our customers’ reputations. Claims may be made by individuals or by classes of users. Our product liability and related insurance policies may not apply or sufficiently cover any product liability lawsuit that arises from defective software or products. Customers such as our collaboration partners may also seek indemnification for third party claims allegedly arising from breaches of warranties under our collaboration agreements.

Errors, defects or other performance problems in our software or other products may also result in the loss of, or delay in, the market acceptance of our software, our products and related 3D printing or engineering services or postponement of customer deployment. Such difficulties could also cause us to lose customers and, particularly in the case of our largest customers, the potentially substantial associated revenue which would have been generated by our sales to companies participating in our customer’s supply chain. Technical problems, or the loss of a customer with a particularly important global reputation, could also damage our own business reputation and cause us to lose new business opportunities.

We rely on our information technology systems and databases to manage numerous aspects of our business and to provide analytical information to management. Our information technology systems allow us to, among other things, optimize our software development and research and development efforts, organize our

in-house

3D printing services logistics, efficiently purchase products from our suppliers, provide other procurement and logistic services, ship and invoice products to our customers on a timely basis, maintain cost-effective operations and generally provide service to our customers. Our information technology systems are an essential component of our business and growth strategies, and a disruption to our information technology systems could significantly limit our ability to manage and operate our business efficiently. Although we take steps to secure our information technology systems, including our computer systems, intranet and internet sites, email and other telecommunications and data networks, the security measures we have implemented may not be effective and our systems may be vulnerable to, among other things, damage and interruption from power loss, including as a result of natural disasters, computer system and network failures, loss of telecommunication services, operator negligence, loss of data, security breaches, computer viruses and other disruptive events. Any such disruption could adversely affect our reputation, brand and financial condition.

In addition, during the next few years, we expect to gradually replace a number of our information technology systems with new, cloud-based systems. This transformation is intended to further increase our security and data integrity. Disruptions during the configuration, implementation or operation of, or during the migration to, these new systems may have an impact on our operations and could adversely affect us.

A breach of security in our products or computer systems may compromise the integrity of our products, harm our reputation, create additional liability and adversely impact our financial results.

We make significant efforts to maintain the security and integrity of our product source code and computer systems. The risk of a security breach or disruption, particularly through cyber-attack or cyber intrusion, including by computer hackers, foreign governments and cyber terrorists, has increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased. These threats include identity theft, unauthorized access, DNS attacks, wireless network attacks, viruses and worms, advanced persistent threat (APT), application centric attacks,

peer-to-peer

attacks, phishing, backdoor trojans and distributed denial of service (DDoS) attacks. Any of the foregoing could attack our products and computer systems. Despite significant efforts to create and continuously reinforce the security barriers to such programs, it is virtually impossible for us to entirely eliminate this risk. Like all software products and computer systems, our software products and computer systems are vulnerable to such cyber-attacks, and our computer systems have been subject to certain cyber security incidents in the past. The impact of cyber-attacks could disrupt the proper functioning of our software products and computer systems, cause errors in the output of our or our customers’ work, allow unauthorized access to sensitive, proprietary or confidential information of our company, our customers or the patients that we and our customers serve through our medical solutions. Moreover, as we continue to invest in new lines of products and services we are exposed to increased security risks and the potential for unauthorized access to, or improper use of, the information of our product and service users. If any of the foregoing occur, our reputation may suffer, customers may stop buying our products or services, we could face lawsuits and potential liability, and our results of operations could be adversely affected.

We rely on third-party technology, platform, carriers, server and hardware providers and as well as local servers, and a failure of service by these providers or by our local servers could adversely affect our business and reputation.

We use third party cloud providers to host a major part of our servers. If these providers are unable to handle current or higher volumes of use, experiences any interruption in operations or ceases operations for any reason or if we are unable to agree on satisfactory terms for a continued hosting relationship, we would be forced to enter into a relationship with other service providers or assume these hosting responsibilities ourselves. If we are forced to switch hosting facilities, we may not be successful in finding an alternative service provider on acceptable terms or in hosting the computer servers ourselves. We may also be limited in our remedies against our third party hosting providers in the event of a failure of service. A failure or limitation of service or available capacity by our third party hosting providers could adversely affect our business and reputation.

Table of Contents

In addition to using third party cloud providers, we have also established local servers and infrastructure in multiple offices, including in Leuven. A failure of these local servers could adversely affect our business and reputation.

Workplace accidents or environmental damage could result in substantial remedial obligations and damage to our reputation.

Accidents or other incidents that occur at our service centers and other facilities or involve our personnel or operations could result in claims for damages against us. In addition, in the event we are found to be financially responsible, as a result of environmental or other laws or by court order, for environmental damages alleged to have been caused by us or occurring on our premises, we could be required to pay substantial monetary damages or undertake expensive remedial obligations. The amount of any costs, including fines or damages payments that we might incur under such circumstances could substantially exceed any insurance we have to cover such losses. Any of these events, alone or in combination, could have a material adverse effect on our business, financial condition and results of operations and could adversely affect our reputation.

Our operations are subject to environmental laws and other government regulations that could result in liabilities in the future.

We are subject to local environmental laws and regulations governing our operations, including, but not limited to, emissions into the air and water and the use, handling, disposal and remediation of hazardous substances. A certain risk of environmental liability is inherent in our production activities. Under certain environmental laws, we could be held solely or jointly and severally responsible, regardless of fault, for the remediation of any hazardous substance contamination at our service centers and other facilities and the respective consequences arising out of human exposure to such substances or other environmental damage. We may not have been and may not be at all times in complete compliance with environmental laws, regulations and permits, and the nature of our operations exposes us to the risk of liabilities or claims with respect to environmental and worker health and safety matters. If we violate or fail to comply with environmental laws, regulations and permits, we could be subject to penalties, fines, restrictions on operations or other sanctions, and our operations could be interrupted. The cost of complying with current and future environmental, health and safety laws applicable to our operations, or the liabilities arising from past releases of, or exposure to, hazardous substances, may result in future expenditures. Any of these developments, alone or in combination, could have a material adverse effect on our business, financial condition and results of operations.

We have seven 3D printing service centers in Europe, the United States, Brazil and Japan, including our principal 3D printing service center located in Leuven, Belgium. If the operations of these facilities are materially disrupted, whether by fires or other industrial accidents, extreme weather, natural disasters, labor stoppages, acts of terror, or otherwise, we would be unable to fulfill customer orders for the period of the disruption, we would not be able to recognize revenue on orders, we could suffer damage to our reputation, and we might need to modify our standard sales terms to secure the commitment of new customers during the period of the disruption and perhaps longer. Depending on the cause of the disruption, we could incur significant costs to remedy the disruption and resume providing 3D printing services. Such a disruption could have an adverse effect on our results of operations.

We could experience unforeseen difficulties in building and operating key portions of our 3D printing infrastructure.

We have designed and built our own 3D printing operations, some of the 3D printer platforms in use and other key portions of our technical infrastructure through which we serve our products and services, and we plan to continue to expand the size of our infrastructure through expanding our 3D printing facilities. The infrastructure expansion we may undertake may be complex, and unanticipated delays in the completion of these projects or availability of components may lead to increased project costs, operational inefficiencies, or interruptions in the delivery or degradation of the quality of our products. In addition, there may be issues related to this infrastructure that are not identified during the design and implementation phases, which may only become evident after we have started to fully utilize the underlying equipment, that could further degrade the user experience or increase our costs.

We may not have adequate insurance for potential liabilities, including liabilities arising from litigation.

In the ordinary course of business, we have been, and in the future may be, subject to various product and

non-product

related claims, lawsuits and administrative proceedings seeking damages or other remedies arising out of our commercial operations, including litigation related to defects in our software or other products. We maintain insurance to cover our potential exposure for a number of claims and losses. However, our insurance coverage is subject to various exclusions, self-retentions and deductibles, may be inadequate or unavailable to protect us fully, and may be cancelled or otherwise terminated by the insurer. Furthermore, we face the following additional risks related to our insurance coverage:

•

we may not be able to continue to obtain insurance coverage on commercially reasonable terms, or at all, including with respect to our activities in the medical industry;

•

we may be faced with types of liabilities that are not covered under our insurance policies, such as environmental contamination, terrorist attacks or alleged infringements of third parties’ intellectual property rights, and that exceed any amounts that we may have reserved for such liabilities;

Table of Contents

•

the amount of any liabilities that we may face may exceed our policy limits; and

•

we may incur losses resulting from the interruption of our business that may not be fully covered under our insurance policies.

Even a partially uninsured claim of significant size, if successful or if settled for a substantial amount of money, could have a material adverse effect on our business, financial condition, results of operations and liquidity. However, even if we successfully defend ourselves against any such claim, we could be forced to spend a substantial amount of money in litigation expenses, our management could be required to spend valuable time defending these claims and our reputation could suffer, any of which could adversely affect our results of operations.

Current and future global economic uncertainties and political conditions may adversely affect our results of operations.

Our results of operations could be substantially affected not only by global economic conditions, but also by local operating, economic, public health or environmental conditions, which can vary substantially by market. Unfavorable conditions can depress sales in a given market and may result in actions that adversely affect our margins, constrain our operating flexibility or result in charges that are unusual or

non-recurring.

Certain macroeconomic events, such as adverse conditions in the global economy, including with the continuing market disruptions caused by the ongoing COVID-19 pandemic and related responses thereto, the consequences of the armed conflict in Ukraine, and the economic and political challenges facing China, Brazil, the United States, and certain Eurozone countries, could have a more wide-ranging and prolonged impact on the general business environment, which could also adversely affect us. These economic developments could affect us in numerous ways, many of which we cannot predict. We are unable to predict the likely duration and severity of the current disruption in financial markets and adverse economic conditions, or the effects these disruptions and conditions could have on us.

In addition, political and economic developments could also result in changes to legislation or reformation of government policies, rules and regulations, including in relation to tax and trade. Such changes could have a significant impact on our business by increasing the cost of doing business, affecting our ability to sell our software, products and services and negatively impacting our profitability. For example, on February 24, 2022, the Russian Federation invaded Ukraine, as a result of which immediate severe trade sanctions were issued, in particular by the the United States and the European Union.

We face potential liability related to the privacy and security of personal information we collect.

In particular, but not exclusively, in connection with our Materialise Medical segment and the personalized wearables business we are pursuing within our Materialise Manufacturing segment, we may have access to personal information that is subject to a number of U.S. federal and state, E.U. and other applicable foreign laws protecting the confidentiality of certain patient health or other private information, including patient records, and restricting the use and disclosure of that protected information.

In the United States, we are subject to the Health Insurance Portability and Accountability Act, or HIPAA, the Health Information Technology for Economic and Clinical Health Act of 2009, regulations issued pursuant to these statutes, state privacy and security laws and regulations. These statutes, regulations and contractual obligations impose numerous requirements regarding the use and disclosure of personal health information with which we must comply. In addition, a new privacy law, the California Consumer Privacy Act, or CCPA, effective as of January 1, 2020, requires, among other things, covered companies, including us, to provide new disclosures to California consumers and afford such consumers the ability to opt out of certain sales of personal information. We cannot yet predict the impact of the CCPA on our business or operations, but it may require us to modify our data processing practices and policies and to incur substantial costs and expenses in an effort to comply.

In the European Union, the General Data Protection Regulation, or the GDPR, was passed on May 24, 2016, and replaced the E.U. Data Protection Directive when it came into force on May 25, 2018. GDPR introduced new data protection requirements in the European Union, unprecedented regulatory risk

for non-compliant data

processors and controllers and sizeable penalties for serious breaches—up to €20 million or 4% of global turnover, whichever is higher. The GDPR also significantly expands the territorial reach of existing E.U. data protection and privacy rules. Our business processes have been and continue to be modified in order to incorporate the requirements of the GDPR. In addition, in connection with its withdrawal from the European Union, the United Kingdom implemented the GDPR as of January 1, 2021 (as it existed on December 31, 2020 but subject to certain U.K.-specific amendments), or U.K. GDPR.

In ensuring continued compliance with the E.U. regime, our transfer of any personal data from the European Union to the United States must be done in a manner which satisfies E.U. cross-border data transfer requirements. The

E.U.-U.S.

Privacy Shield, which had been adopted by the United States and the European Union as a framework for protecting the fundamental rights of anyone in the European Union whose personal data is transferred to the United States for commercial purposes, was subsequently invalidated by the European Court of Justice on July 16, 2020 for not meeting E.U. regulatory requirements. We are investigating and undertaking appropriate steps to mitigate the risks caused by the invalidation of the Privacy Shield, including the use and implementation of the standard contractual clauses for the transfer of personal data to third countries as published by the European Commission on June 4, 2021.

In addition, the use and disclosure of personal health and other private information is subject to regulation in other jurisdictions in which we do business or expect to do business in the future. Those jurisdictions may attempt to apply such laws extraterritorially or through treaties or other arrangements with European governmental entities. We might unintentionally violate such laws, such laws may be modified and new laws may be enacted in the future which may increase the chance that we violate them. For example, each of the GDPR and the U.K. GDPR contains rules relating to the collection and processing of personal information, which are not identical to the current rules under national privacy laws and which

Table of Contents

contain more strict provisions. Any such developments, or developments stemming from enactment or modification of other laws, or the failure by us to comply with their requirements or to accurately anticipate the application or interpretation of these laws could create material liability to us, result in adverse publicity and negatively affect our medical business.

Our failure to accurately anticipate the application or interpretation of these statutes, regulations and contractual obligations as we develop our medical and other products and services, a failure by us to comply with their requirements (e.g., evolving encryption and security requirements) or an allegation that defects in our medical or other products have resulted in noncompliance by our customers could create material civil and/or criminal liability for us, resulting in adverse publicity and negatively affecting our medical business. Any legislation or regulation in the area of privacy and security of personal information could affect the way we operate and could harm our business. The costs of compliance with, and the other burdens imposed by, these and other laws or regulatory actions may prevent us from selling our solutions or increase the costs associated with selling our products and services, and may affect our ability to invest in or jointly develop our products and services in the United States, the European Union and in foreign jurisdictions. Further, we cannot assure you that our privacy and security policies and practices will be found sufficient to protect us from liability or adverse publicity relating to the privacy and security of personal information.

Risks Related to Our Materialise Medical Segment and Regulatory Environment

Our medical business, financial condition, results of operations and cash flows could be significantly and negatively affected by substantial government regulations.

Our medical products are subject to rigorous regulation by the European Commission, the U.S. Food and Drug Administration, or the FDA, and numerous other applicable governmental authorities. In general, the development, testing, manufacturing and marketing of our medical products are subject to extensive regulation and review by numerous governmental authorities in the European Union, the United States, the United Kingdom, Canada, Brazil, Japan and Australia, and in other markets where we are currently active or may become active in the future. The regulatory process requires the expenditure of significant time, effort and expense to bring new medical products to market, and we cannot be certain that we will receive regulatory approvals, certifications or registrations in any country in which we plan to market our medical products.

The laws and regulations, including the requirements for approvals, certifications or registrations and the time required for regulatory review, vary from country to country. For example, to market our medical products within the member states of the European Union, we are required to comply with the European Medical Device Directive. Under the European Medical Device Directive, all medical devices except custom-made and investigational devices must bear the CE mark. To obtain authorization to affix the CE mark to our medical products, a recognized European notified body must assess our quality systems and the product’s conformity to the requirements of the European Medical Device Directive. Recently, this process has been impacted by the general lack of capacity of notified bodies properly designated under the new E.U. Medical Device Regulation, which has become effective on May 26, 2021, as well as difficulties due to the ongoing

COVID-19

pandemic in executing

on-site

audits. These issues may delay the (re)certification and commercialization of our new or updated medical products in the European Economic Area, or EEA. Similarly, in the United States, we are required to obtain clearance or approval from the FDA prior to marketing our medical products.

The regulatory approval process outside the European Union and the United States may include all of the risks associated with obtaining CE or FDA clearance or approval in addition to other risks. Clearance or approval by the FDA in the United States, or conformity assessment and affixing a CE mark in the EEA does not ensure approval or certification by regulatory authorities in other countries, and approval or certification by one foreign regulatory authority does not ensure approval by regulatory authorities in other countries. We may be required to perform additional

pre-clinical

or clinical studies even if FDA clearance or approval, or the right to bear the CE label, has been obtained. We may not obtain regulatory approvals or certifications outside the European Union and the United States on a timely basis, if at all. If we fail to receive necessary approvals to commercialize our medical products in jurisdictions outside the European Union and the United States on a timely basis, or at all, our medical business, financial condition and results of operations could be adversely affected.

As a manufacturer of medical devices, we participate in the Medical Device Single Audit Program, or MDSAP, which is a prerequisite for market entry in Canada, and which makes results from external audits by an accredited auditing organization available to the regulatory authorities of the United States, Canada, Brazil, Japan and Australia. A single audit is used in lieu of multiple separate audits or inspections by participating regulatory authorities or their representatives, reducing the overall number of audits or inspections. However, the auditing organization must inform regulatory authorities directly when certain

non-conformity

thresholds are reached, enabling participating regulatory authorities to immediately undertake actions appropriate for their jurisdictions.

In addition, we are required to implement and maintain stringent reporting, labelling and record keeping procedures and make our facilities and operations subject to periodic inspections, both scheduled and unannounced, by the regulatory authorities. The medical device industry is also subject to a myriad of complex laws and regulations governing reimbursement, which varies from jurisdiction to jurisdiction in the European Union and which includes Medicare and Medicaid reimbursement in the United States as well as healthcare fraud and abuse laws, with these laws and regulations being subject to interpretation. In many instances, the industry does not have the benefit of significant regulatory or judicial interpretation of these laws and regulations. In certain public statements, governmental authorities have taken positions on issues for which little official interpretation was previously available. Some of these positions appear to be inconsistent with common practices within the industry but that have not previously been challenged.

Table of Contents

Various governmental agencies have become increasingly vigilant in recent years in their investigation of various business practices. Governmental and regulatory actions against us can result in various actions that could adversely impact our medical operations, including:

•

the recall or seizure of products;

•

the suspension or revocation of the authority necessary for the production or sale of a product;

•

the delay of our ability to introduce new products into the market;

•

the suspension of shipments from particular manufacturing facilities;

•

the issuance of warning letters or untitled letters;

•

the imposition of operating restrictions;

•

the imposition of injunctions, fines and penalties;

•

the exclusion of our products from being reimbursed by healthcare programs in the European Union or U.S. federal and state healthcare programs (such as Medicare, Medicaid, Veterans Administration health programs and Civilian Health and Medical Program of the Uniformed Services);

•

the delay or denial of customs clearance of our products for import in certain jurisdictions; and

•

other civil or criminal sanctions against us.

Failure to comply with applicable regulatory requirements could also result in civil actions against us and other unanticipated expenditures. Any of these actions, in combination or alone, or even a public announcement that we are under investigation for possible violations of these laws, could have a material adverse effect on our medical business, financial condition, results of operations and cash flows. If investigated, we cannot assure that the costs of defending or resolving those investigations or proceedings would not have a material adverse effect on our financial condition, results of operations and cash flows.

In many of the countries in which we market our medical products, we are subject to regulations affecting, among other things, clinical efficacy, product standards, packaging requirements, labelling requirements, import/ export restrictions, tariff regulations, duties and tax requirements. Many of the regulations applicable to our medical surgical guides, models, implants and software products in these countries are similar to those of the European Commission and the FDA. In addition, in many countries the national health or social security organizations require our medical products to be qualified before they can be marketed with the benefit of reimbursement eligibility. Failure to receive or delays in the receipt of relevant foreign qualifications also could have a material adverse effect on our medical business, financial condition, results of operations and cash flows.

As the government regulators in the European Union, United States and elsewhere have become increasingly stringent, we may be subject to more rigorous regulation by governmental authorities in the future.

Modifications to our medical products marketed in the United States may require new 510(k) clearances or premarket approvals, or may require us to cease marketing or recall the modified products until clearances are obtained.

Any modification to a 510(k)-cleared device that could significantly affect its safety or efficacy, or that would constitute a major change in its intended use, technology, materials, packaging and certain manufacturing processes, may require a new 510(k) clearance or, possibly, a premarket approval, or PMA. The FDA requires every manufacturer to make the determination regarding the need for a new 510(k) clearance or PMA in the first instance, but the FDA may (and often does) review the manufacturer’s decision. The FDA may not agree with a manufacturer’s decision regarding whether a new clearance or approval is necessary for a modification, and may retroactively require the manufacturer to submit a premarket notification requesting 510(k) clearance or an application for PMA. We have made modifications to our medical products in the past and may make additional modifications in the future that we believe did not or will not require additional clearances or approvals. No assurance can be given that the FDA would agree with any of our decisions not to seek 510(k) clearance or PMA. If the FDA requires us to cease marketing and recall the modified device until we obtain a new 510(k) clearance or PMA, our medical business, financial condition, results of operations and future growth prospects could be materially adversely affected. Further, our medical products could be subject to recall if the FDA determines, for any reason, that our products are not safe or effective. Any recall or FDA requirement that we seek additional approvals or clearances could result in significant delays, fines, increased costs associated with modification of a product, loss of revenue and potential operating restrictions imposed by the FDA.

Table of Contents

Healthcare policy changes, including legislation to reform the U.S. healthcare system, could adversely affect us.

From time to time, legislation is drafted and introduced that could significantly change the statutory provisions governing the clearance or approval, manufacture and marketing of a medical device. In addition, regulations and guidance are often revised or reinterpreted in ways that may significantly affect our medical business and our medical products. It is impossible to predict whether legislative changes will be enacted or regulations, guidance or interpretations changed, and what the impact of such changes, if any, may be.

For instance, in 2010, the U.S. Patient Protection and Affordable Care Act, as amended by the U.S. Health Care and Education Reconciliation Act of 2010, or collectively, the PPACA, was enacted, which included, among other things, the following measures: a Patient-Centered Outcomes Research Institute to oversee, identify priorities in and conduct comparative clinical effectiveness research; reporting and disclosure requirements on device manufacturers for any “transfer of value” made or distributed to prescribers and other healthcare providers, effective March 30, 2013 (referred to as the Physician Sunshine Payment Act); payment system reforms including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models, beginning on or before January 1, 2013; and an independent payment advisory board that will submit recommendations to reduce Medicare spending if projected Medicare spending exceeds a specified growth rate. Some of the provisions of the PPACA have yet to be fully implemented, while certain provisions have been subject to U.S. judicial and Congressional challenges. Efforts to repeal and replace the PPACA have been ongoing since the 2016 election, but it is unclear if these efforts will be successful. Since January 2017, former President Trump signed Executive Orders and other directives designed to delay, circumvent or loosen the implementation of certain provisions requirements mandated by the PPACA or otherwise circumvent some of the requirements for health insurance mandated by the PPACA. In addition, as part of the December 2017 Tax Cuts and Jobs Act, the “individual mandate,” which required individuals to purchase insurance, was repealed. Furthermore, in December 2018, a U.S. District Court Judge in the Northern District of Texas ruled that the PPACA is unconstitutional in its entirety because such individual mandate was repealed, although the U.S. District Court Judge and former President Trump, among others, had acknowledged the ruling would have no immediate effect pending appeal. Thus, the full impact of the PPACA, any law repealing or replacing elements of it, and the political uncertainty surrounding any repeal or replacement legislation on our business remains unclear.

We cannot predict what healthcare programs and regulations will be ultimately implemented at the U.S. federal or state level, or at the E.U. level or within the implementing legislation of the individual E.U. Member States, or the effect of any future legislation or regulation. However, these provisions as adopted could meaningfully change the way healthcare is delivered and financed, and may materially impact numerous aspects of our medical business. In particular, any changes that lower reimbursements or reduce medical procedure volumes could adversely affect our medical business and results of operations.

In addition, in the future there may continue to be additional proposals relating to the reform of the healthcare systems of the United States, the European Union, any individual Member State of the European Union or any other jurisdiction where we may operate. For example, on April 5, 2017, the Medical Devices Regulation (Regulation (EU) 2017/745) was adopted. Subject to any postponement of the implementation of the Medical Devices Regulation by the European Council and European Parliament, the regulation will become effective on May 26, 2021. Once effective, the new regulation will, among other things:

•

strengthen the rules on placing devices on the market and reinforce surveillance once they are available;

•

establish explicit provisions on manufacturers’ responsibilities for the

follow-up

of the quality, performance and safety of devices placed on the market;

•

improve the traceability of medical devices throughout the supply chain to the

end-user

or patient through a unique identification number;

•

set up, as of 2022, a central database to provide patients, healthcare professionals and the public with comprehensive information on products available in the European Union; and

•

strengthen rules for the assessment of certain high-risk devices, such as implants, which may have to undergo an additional check by experts before they are placed on the market.

Transition from the regulation of our products under the current E.U. regulatory framework to regulation under the Medical Devices Regulation may require a substantial transition effort by us. In addition, detail as to how certain aspects of the Medical Devices Regulation will be applied remains unclear. Failure to update our quality system and regulatory documentation could delay our transition to compliance with the Medical Devices Regulation and delay or prevent us from obtaining new CE Certificates of Conformity under the Regulation. As a result, transition from compliance with the current E.U. regulatory framework to the Medical Devices Regulation could result in disruption to our business in the European Economic Area, which could adversely affect our business, results of operation and financial condition.

Furthermore, initiatives sponsored by government agencies, legislative bodies and the private sector to limit the growth of healthcare costs, including price regulation and competitive pricing, are ongoing in markets where we do business. We could experience a negative impact on our results of operations due to increased pricing pressure in certain or all of the markets in which we operate. Governments, hospitals and other third party payors could reduce the amount of approved reimbursements for our products. Reductions in reimbursement levels or coverage or other cost-containment measures could unfavorably affect our future results of operations.

The use, including the misuse or

off-label

use, of our medical services and products may be deemed unauthorized use or improper promotion, which could harm our image in the marketplace or result in injuries that lead to product liability suits and could be costly to our business or result in regulatory sanctions.

Medical decisions may only be made and operations may only be executed by trained professionals who are authorized to do so in the jurisdictions in which they operate.

Table of Contents

Our medical services and products are generally designed to support surgeons in the planning and performance of their operations. In our medical software products set up, training and engineering support, we make it very clear that responsibility for medical decisions rests exclusively with the responsible surgeon, who is responsible for carefully reviewing and explicitly approving the surgical plan and/or the design of the medical device that is proposed by our software and engineers. Nonetheless, we cannot assure that patients, hospitals, surgeons or other parties will not try to hold us responsible for all or a part of the medical decisions underlying the operations that we support, exposing us to potential litigation or civil and criminal liability for unauthorized medical decision-making. Such actions or liability could lead governmental agencies to conclude that our products or services are used improperly, all of which could significantly damage our reputation and could materially impair the continued adoption of our medical services and product offering in the market.

In the markets in which we operate, our medical promotional materials and training methods must comply with numerous applicable laws and regulations, including the prohibition on the promotion of a medical device for a use that has not been cleared or approved by the relevant regulator or supervisory body. Use of a device outside of its cleared or approved indication is known as

“off-label”

use. If a relevant governmental authority determines that our medical promotional materials or training constitute promotion of an

off-label

use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fine and criminal penalties. In that event, our reputation could be damaged and adoption of our medical products would be impaired. Although we train our sales force not to promote our medical products for

off-label

uses, and our instructions for use in all markets specify that our products are not intended for use outside of those indications cleared for use, competent regulatory agency could conclude that we have engaged in

off-label

promotion. In addition, there may be increased risk of injury if surgeons attempt to use our medical products

off-label.

Surgeons also may misuse our medical products or use improper techniques if they are not adequately trained, potentially leading to injury and an increased risk of product liability. Product liability claims are expensive to defend and could divert our management’s attention and result in substantial damage awards against us. Any of these events could adversely affect our medical business, results of operations and reputation and our ability to attract and retain customers for our products and services.

If our marketed medical devices are defective or otherwise pose safety risks, the relevant governmental authorities could require their recall, or we may initiate a recall of our products voluntarily.

The relevant governmental authorities may require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture or in the event that a product poses an unacceptable risk to health. Manufacturers, on their own initiative, may recall a product if any material deficiency in a device is found. A government mandated or voluntary recall could occur as a result of an unacceptable risk to health, component failures, manufacturing errors, design or labelling defects or other deficiencies and issues. Recalls of any of our medical products would divert managerial and financial resources and have an adverse effect on our financial condition and results of operations. Any recall could impair our ability to produce our medical products in a cost-effective and timely manner in order to meet our customers’ demands. We also may be required to bear other costs or take other actions that may have a negative impact on our future revenue and our ability to generate profits. We may initiate voluntary recalls involving our medical products in the future that we determine do not require notification of the relevant regulatory body. If a governmental agency disagrees with our determinations, they could require us to report those actions as recalls. A future recall announcement could harm our reputation with customers and negatively affect our revenue. In addition, the relevant authority could take enforcement action for failing to report the recalls when they were conducted.

Alternative medical solutions could outperform the solutions we offer, rendering our solutions obsolete.

Our Materialise Medical segment products and services compete with other innovative technologies that offer similar medical solutions. In addition, many of our competitors are continuing to innovate in the subsegments of the market that we seek to address. For example, our 3D printed surgical guides compete with robotics and navigational solutions, which offer alternative methods to guide a surgeon during an intervention. These current and future alternative technological solutions could outperform the solutions we offer and render our solutions, obsolete.

If our Materialise Medical segment products cause or contribute to a death or a serious injury, or malfunction in certain ways, we will be subject to medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions.

Under the FDA medical device reporting regulations, or MDR, we are required to report to the FDA any incident in which our medical product has malfunctioned and would be likely to cause or contribute to a death or serious injury if the malfunction happened again. If we fail to report these events to the FDA within the required timeframes, or at all, the FDA could take enforcement action against us. Any adverse event involving our medical products could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection, mandatory recall or other enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business, and may harm our reputation and financial results.

In the EEA, we must comply with the E.U. Medical Device Vigilance System, the purpose of which is to improve the protection of health and safety of patients, users and others by reducing the likelihood of reoccurrence of incidents related to the use of a medical device. Under this system, incidents must be reported to the competent authorities of the Member States of the EEA. An incident is defined as any malfunction or deterioration in the characteristics and/or performance of a device, as well as any inadequacy in the labelling or the instructions for use which, directly or indirectly, might lead to or might have led to the death of a patient or user or of other persons or to a serious deterioration in their state of health. Incidents are evaluated by the EEA competent authorities to whom they have been reported, and where appropriate, information is disseminated between them in the form of National Competent Authority Reports. The E.U. Medical Device Vigilance System is further intended to

Table of Contents

facilitate a direct, early and harmonized implementation of Field Safety Corrective Actions, or FSCAs, across the Member States of the EEA where the device is in use. An FSCA is an action taken by a manufacturer to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to the end users of the device through Field Safety Notices.

Our Materialise Medical segment’s 3D printing operations are required to operate within a quality management system that is compliant with the regulations of various jurisdictions, including the requirements of ISO 13485, and the U.S. Quality System Regulation, which is costly and could subject us to enforcement action.

We are subject to the regulations of various jurisdictions regarding the manufacturing process for our medical products, including the requirements of ISO 13485. Within the United States, we are required to comply with the Quality System Regulation, which covers, among other things, the methods of documentation of the design, testing, production, control, quality assurance, labelling, packaging, sterilization, storage and shipping of our medical products. Compliance with these regulations is costly and time-consuming. In addition, the FDA enforces the Quality System Regulation through periodic announced and unannounced inspections of manufacturing facilities. The failure by a manufacturer to comply with applicable statutes and regulations administered by the FDA and other regulatory bodies, or the failure to timely and adequately respond to any adverse inspectional observations or product safety issues, could result in, among other things, any of the following enforcement actions:

•

untitled letters, warning letters, fines, injunctions, consent decrees and civil penalties;

•

customer notifications or repair, replacement, refunds, recall, detention or seizure of our medical products;

•

operating restrictions or partial suspension or total shutdown of production;

•

refusing or delaying requests for 510(k) clearance or PMA of new products or modified products;

•

withdrawing 510(k) clearances or PMAs that have already been granted;

•

refusal to grant export approval for our medical products; or

•

criminal prosecution.

Any regulatory enforcement actions could impair our ability to produce our medical products in a cost-effective and timely manner in order to meet our customers’ demands. We also may be required to bear other costs or take other actions that may have a negative impact on our future revenue and our ability to generate profits. Furthermore, our key component suppliers may not currently be or may not continue to be in compliance with all applicable regulatory requirements, which could result in our failure to produce our medical products on a timely basis and in the required quantities, if at all.

We may be subject to or otherwise affected by U.S. federal and state, European or other healthcare laws, including fraud and abuse and health information privacy and security laws, and could face substantial penalties if we are unable to fully comply with such laws.

Healthcare regulation by U.S. federal and state, European or other governments could significantly impact our medical business. Healthcare fraud and abuse and health information privacy and security laws potentially applicable to our medical operations include:

•

the U.S. federal Anti-Kickback Law, which constrains our marketing practices and those of our independent sales agencies, educational programs, pricing, bundling and rebate policies, grants for physician-initiated trials and continuing medical education, and other remunerative relationships with healthcare providers, by prohibiting, among other things, soliciting, receiving, offering or providing remuneration, intended to induce the purchase or recommendation of an item or service reimbursable under a U.S. federal healthcare program, such as the Medicare or Medicaid programs;

•

U.S. federal false claims laws which prohibit, among other things, knowingly presenting, or causing to be presented, claims for payment from Medicare, Medicaid, or other third party payors that are false or fraudulent;

•

HIPAA, and its implementing regulations, which created federal criminal laws that prohibit executing a scheme to defraud any healthcare benefit program or making false statements relating to healthcare matters and which also imposes certain regulatory and contractual requirements regarding the privacy, security and transmission of individually identifiable health information;

•

U.S. state laws analogous to each of the above federal laws, such as anti-kickback and false claims laws that may apply to items or services reimbursed by any third party payor, including commercial insurers, and state laws governing the privacy and security of certain health information, many of which differ from each other in significant ways and often are not

pre-empted

by HIPAA, thus complicating compliance efforts; and

Table of Contents

•

similar foreign laws and regulations governing healthcare fraud and abuse, patient data privacy, interactions with healthcare professionals and related laws and regulations that apply to us in the countries in which we operate.

If our past or present operations are found to be in violation of any of such laws or any other governmental regulations that may apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion from U.S. federal healthcare programs and the curtailment or restructuring of our operations. Similarly, if the healthcare providers or entities with whom we do business are found to be

non-compliant

with applicable laws, they may be subject to sanctions, which could also have a negative impact on us. Any penalties, damages, fines, curtailment or restructuring of our operations could adversely affect our ability to operate our medical business and our financial results. The risk of our company being found in violation of these laws is increased by the fact that many of them have not been fully interpreted by the regulatory authorities or the courts, and their provisions are open to a variety of interpretations. Further, the PPACA, among other things, amends the intent requirement of the U.S. federal anti-kickback and criminal health care fraud statutes. A person or entity no longer needs to have actual knowledge of this statute or specific intent to violate it. In addition, the PPACA provides that the government may assert that a claim including items or services resulting from a violation of the U.S. federal anti-kickback statute constitutes a false or fraudulent claim for purposes of the false claims statutes. Any action against us for violation of these laws, even if we successfully defend against them, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business.

Risks Related to Our Intellectual Property

If we are unable to obtain patent protection for our products or otherwise protect our intellectual property rights, our business could suffer.

We rely on a combination of patents, copyrights, trademarks, trade secrets, confidentiality and other contractual arrangements with our employees,

end-users

and others to maintain our competitive position. Our success depends, in part, on our ability to obtain patent protection for or maintain as trade secrets our proprietary products, technologies and inventions and to maintain the confidentiality of our trade secrets and

know-how,

operate without infringing upon the proprietary rights of others and prevent others from infringing upon our business proprietary rights.

Despite our efforts to protect our proprietary rights, it is possible that competitors or other unauthorized third parties may obtain, copy, use or disclose or otherwise circumvent our technologies, software, inventions, processes or improvements. We cannot assure investors that any of our existing or future patents or other intellectual property rights will be enforceable, will not be challenged, invalidated or circumvented, or will otherwise provide us with meaningful protection or any competitive advantage. In addition, our pending patent applications may not be granted, and we may not be able to obtain foreign patents or elect to file applications corresponding to our U.S., European or other patents. We intend to expand our business to certain countries that may not provide the same level of patent or other intellectual property protection as the United States and the European Union. Even if we assert our patents or obtain additional patent or similar protection in such countries, effective enforcement of such patents or other rights may not be available. If our patents do not adequately protect our technology, our competitors may be able to offer products or services similar to ours or potential customers may gain illegal access to our proprietary technology. Our competitors may also be able to develop similar technology independently or design around our patents, and we may not be able to detect the unauthorized use of our proprietary technology or take appropriate steps to prevent such use. Any of the foregoing events would lead to increased competition and lower revenue or gross margins, which could adversely affect our results of operations.

Moreover, ongoing changes to the U.S. patent laws may impact our ability to obtain and enforce our intellectual property rights. In recent years, the courts have interpreted U.S. patent laws and regulations differently, and in particular the U.S. Supreme Court has decided a number of patent cases and continues to actively review more patent cases than it has in the past. Some of these changes or potential changes may not be advantageous for us, and may make it more difficult to obtain adequate patent protection or to enforce our patents against parties using them without a license or payment of royalties. These changes could increase the costs and uncertainties surrounding the prosecution of our patent applications and the enforcement or defense of our patent rights, all of which could have a material adverse effect on our business and financial condition.

We may not be able to protect our trade secrets and intellectual property.

While some of our technology is licensed under patents belonging to others or is covered by process patents which are owned or applied for by us, much of our technology is not protected by patents. Furthermore, patents are jurisdictional in nature and therefore only protect us in certain markets, rather than globally. We have devoted substantial resources to the development of our technology, trade secrets,

know-how

and other unregistered proprietary rights. While we enter into confidentiality and invention assignment agreements intended to protect such rights, such agreements can be difficult and costly to enforce or may not provide adequate remedies if violated. Such agreements may be breached and confidential information may be willfully or unintentionally used or disclosed in violation of the agreements, or our competitors or other parties may learn of the information in some other way. We cannot legally prevent one or more other companies from developing similar or identical technology to our unpatented technology and accordingly, it is likely that, over time, one or more other companies may be able to replicate our technology, thereby reducing our technological advantages. If we do not protect our technology or are unable to develop new technology that can be protected by patents or as trade secrets, we may face increased competition from other companies, which may adversely affect our results of operations.

Table of Contents

We may incur substantial costs enforcing or acquiring intellectual property rights and defending against third party claims as a result of litigation or other proceedings.

In connection with the enforcement of our intellectual property rights, opposing third parties from obtaining patent rights or disputes related to the validity or alleged infringement of our or third party intellectual property rights, including patent rights, we have been and may in the future be subject or party, directly or indirectly, to claims, negotiations or complex, protracted litigation or arbitration proceedings.

While we strive to avoid infringing the intellectual property rights of third parties, we cannot provide any assurances that we will be able to avoid any claims, directed against us directly or against our collaboration partners or our other customers, that our products and technology, including the technology that we license from others, infringe the intellectual property rights of third parties. Patent applications in the United States and most other countries are confidential for a period of time until they are published, and the publication of discoveries in scientific or patent literature typically lags actual discoveries by several months or more. As a result, the nature of claims contained in unpublished patent filings around the world is unknown to us, and we cannot be certain that we were the first to conceive inventions covered by our patents or patent applications or that we were the first to file patent applications covering such inventions. Furthermore, it is not possible to know in which countries patent holders may choose to extend their filings under the Patent Cooperation Treaty or other mechanisms. Moreover, the patent landscape in the different fields in which we operate is heavily occupied and freedom to operate examinations are costly and time-consuming. We have not obtained extensive freedom to operate reports in the past for each and all of our products and services, nor do we intend to install on a general basis freedom to operate examinations for our future products and services. In addition, we may be subject to intellectual property infringement claims from individuals, vendors and other companies, including those that are in the business of asserting patents, but are not commercializing products or services in the different fields in which we operate, or our collaboration partners or our other customers may seek to invoke indemnification obligations to involve us in such intellectual property infringement claims. Furthermore, although we maintain certain procedures to help to ensure that the items we 3D print on behalf of customers do not infringe upon the intellectual property rights of others, we cannot be certain that our procedures will be effective in preventing any such infringement.

Intellectual property disputes, litigation and arbitration, regardless of the merit or resolution, could cause us to incur significant costs in enforcing, or responding to, defending and resolving such claims. In addition, such claims can be costly and disruptive to our business operations by diverting attention and energies of management and key technical personnel, by prohibiting or otherwise impairing our ability to commercialize new or existing products or services and by increasing our costs of doing business. We may not prevail in any such dispute or litigation, and an adverse decision in any legal action involving intellectual property rights, including any such action commenced by us, could limit the scope of our intellectual property rights and the value of the related technology. Third party claims of intellectual property infringement successfully asserted against us may require us to redesign infringing technology or enter into costly settlement or license agreements on terms that are unfavorable to us, prevent us from manufacturing or licensing certain of our products, subject us to injunctions restricting our sale of products and use of infringing technology, cause severe disruptions to our operations or the markets in which we compete, impose costly damage awards or require indemnification of our sales agents and

end-users.

In addition, as a consequence of such claims, we may incur significant costs in acquiring the necessary third party intellectual property rights for use in our products and services or developing

non-infringing

substitute technology. Any of the foregoing developments may have a material adverse effect on our business, financial condition and results of operations.

We cannot predict the outcome of an arbitration proceeding in which we are involved.

On November 15, 2021, we received a written notice from counsel for Zimmer Biomet, informing us of Zimmer Biomet’s decision to file a request for arbitration with the Belgian Centre for Arbitration and Mediation. Zimmer Biomet believes that we have a contractual obligation pursuant to the terms of our collaboration to indemnify Zimmer Biomet for the expenses it incurred as a result of its settlement with Conformis, Inc. of a patent dispute related to certain joint replacement devices. We believe there are meritorious defenses to Zimmer Biomet’s claim and intend to contest it vigorously. However, an adverse resolution of this arbitration could have an adverse effect on our business, financial condition, results of operations and cash flows in the period in which the arbitration is resolved. No amounts have been accrued for this loss contingency.

Obtaining and maintaining our patent protection depends on compliance with various procedural, documentary, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for

non-compliance

with these requirements.

Periodic maintenance fees on any issued patent are due to be paid to governmental patent agencies, including the U.S. Patent and Trademark Office, or USPTO, in several stages over the lifetime of the patent. The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. While an inadvertent lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction.

Non-compliance

events that could result in lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits,

non-payment

of fees and failure to properly legalize and submit formal documents. If we or our licensors fail to maintain the patents and patent applications covering our products and processes, our competitive position could be adversely affected.

We may be subject to claims that our employees have wrongfully used or disclosed alleged trade secrets.

Certain of our past and present employees were previously employed at other companies, including our competitors or potential competitors. Some of these employees executed proprietary rights,

non-disclosure

and

non-competition

agreements in connection with such previous employment. Although we try to ensure that our employees do not use the proprietary information or

know-how

of others in their work for us, we may be subject to claims that we or these employees have used or disclosed intellectual property, including trade secrets or other proprietary information, of any such employee’s former employer.

Table of Contents

We are not aware of any threatened or pending claims related to these matters, but in the future litigation may be necessary to defend against such claims. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable personnel or intellectual property rights. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management.

If disputes arise, we could lose rights that are important to our business or be subject to restrictions on the conduct of our business.

We have license agreements with respect to certain intellectual property that is important to our business and that may include exclusivity and

non-competition

undertakings. Disputes may arise between the counterparties to these agreements and us that could result in termination of these agreements. If we fail to comply with our obligations under our intellectual property-related agreements, or misconstrue the scope of the rights granted to us or restrictions imposed on us under these agreements, the counterparties may have the right to terminate these agreements or sue us for damages or equitable remedies, including injunctive relief. Termination of these agreements, the reduction or elimination of our rights under these agreements, or the imposition of restrictions under these agreements that we have not anticipated may result in our having to negotiate new or reinstated licenses with less favorable terms, or to cease commercialization of licensed technology and products. This could materially adversely affect our business.

Certain technologies and patents have been developed with collaboration partners and we may face restrictions on this jointly developed intellectual property.

We have entered into collaborations with a number of industrial and medical device companies and academic institutions, including Zimmer-Biomet, DJO Surgical, DePuy Synthes, Lima, Mathys, Siemens, BASF 3D Printing Solutions GmbH, FluidDa NV, or FluidDa, the University of Michigan, and HOYA. We have, in some cases individually and in other cases along with our collaboration partners, filed for patent protection for a number of technologies developed under these agreements and may in the future file for further intellectual property protection and/or seek to commercialize such technologies. Under some of these agreements, certain intellectual property developed by us and the relevant partner may be subject to joint ownership by us and the partner and our commercial use of such intellectual property may be restricted, or may require written consent from, or a separate agreement with, the partner. In other cases, we may not have any rights to use intellectual property solely developed and owned by the partner. If we cannot obtain commercial use rights for such jointly-owned intellectual property or partner-owned intellectual property, our future product development and commercialization plans may be adversely affected. For additional information, see “Item 4. Information on the Company—B. Business Overview—Intellectual Property.”

Our use of open source software may expose us to additional risks and harm our intellectual property.

Some of our proprietary software, including some of our 3D printing software, may use or incorporate open source software. Some open source software licenses require users who distribute open source software as part of their own software product to publicly disclose all or part of the source code to such software product or make available any derivative works of the open source code on unfavorable terms or at no cost. We monitor, on an ongoing basis, whether our proprietary software, including that in our 3D printing software, would make use of any open source software that could require us to disclose our proprietary source code, which could adversely affect our business.

Risks Related to the ADSs

The ADSs may experience price and volume fluctuations.

The stock market generally has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of listed companies. Broad market and industry factors may negatively affect the market price of the ADSs, regardless of our actual operating performance. The market price and liquidity of the market for the ADSs may be higher or lower than the price you paid and may be significantly affected by numerous factors, some of which are beyond our control. These factors include:

•

significant volatility in the market price and trading volume of securities of companies in our sector, which is not necessarily related to the operating performance of these companies;

•

the mix of products that we sell, and related services that we provide, during any period;

•

delays between our expenditures to develop and market new products and the generation of sales from those products;

•

changes in the amount that we spend to develop, acquire or license new products, technologies or businesses;

•

changes in our expenditures to promote our products and services;

•

success or failure of research and development projects of us or our competitors;

•

announcements of acquisitions by us or one of our competitors;

Table of Contents

•

the general tendency towards volatility in the market prices of shares of companies that rely on technology and innovation;

•

changes in regulatory policies or tax guidelines;

•

changes or perceived changes in earnings or variations in operating results;

•

any shortfall in revenue or net income from levels expected by investors or securities analysts; and

•

general economic trends and other external factors and events, such as the armed conflict in Ukraine, recessions, interest rates, international currency fluctuations, corruption, political instability and acts of war or terrorism.

Any of these could result in a material decline in the price of the ADSs.

Members of our board of directors and senior management own a significant percentage of our ordinary shares and are able to exert significant influence over matters subject to shareholder approval.

Members of our board of directors and senior management beneficially owned approximately

55.9%

of our outstanding ordinary shares (including ordinary shares represented by ADSs), as of April 22, 2022. These shareholders have significant influence over the election of members of our board of directors and the outcome of corporate actions requiring shareholder approval, including dividend policy, mergers, share capital increases, amendments of our restated articles of association and other extraordinary transactions. For example, these shareholders may be able to influence the outcome of elections of members of our board of directors, amendments of our organizational documents, or approval of any merger, sale of assets, or other major corporate transactions. In addition, our restated articles of association provide that, as long as Wilfried Vancraen, our founder and Chief Executive Officer, Hilde Ingelaere, an Executive Vice President of our company who is also Mr. Vancraen’s spouse, and their three children, Linde, Sander and Jeroen Vancraen, or collectively the Family Shareholders, control, directly or indirectly, in the aggregate at least 20% of the voting rights attached to our ordinary shares, a majority of our directors must be appointed by our shareholders from a list of candidates proposed by the Family Shareholders. This concentration of ownership within this group of shareholders and the rights of the Family Shareholders prevent or discourage unsolicited acquisition proposals or offers for our ordinary shares or ADSs that you may feel are in your best interest as one of our shareholders. The interests of these existing shareholders or the Family Shareholders may not always coincide with your interests or the interests of other shareholders, and they may act in a manner that advances their best interests and not necessarily those of other shareholders, including seeking a premium value for their ordinary shares, which might affect the prevailing market price for the ADSs.

The dilutive effect of our warrants could have an adverse effect on the future market price of the ADSs or otherwise adversely affect the interests of our shareholders.

Based on outstanding granted warrants, as of December 31, 2021, there were outstanding granted warrants to subscribe for an aggregate of 82,954 ordinary shares at a weighted average exercise price of €8.31 per share. The warrants likely will be exercised if the market price of the ADSs equals or exceeds the applicable exercise price. To the extent such securities are exercised, additional ordinary shares will be issued, which would dilute the ownership of existing shareholders.

You may not have the same voting rights as the holders of our ordinary shares and may not receive voting materials in time to be able to exercise your right to vote.

Except as described in the deposit agreement related to the ADSs, holders of ADSs are not able to exercise voting rights attaching to the ordinary shares evidenced by the ADSs on an individual basis. Under the terms of the deposit agreement, holders of ADSs may instruct the depositary to vote the ordinary shares underlying their ADSs, but only if we ask the depositary to ask for their instructions. Otherwise, holders of ADSs are not able to exercise their right to vote, unless they withdraw our ordinary shares underlying the ADSs they hold to vote them in person or by proxy. However, holders of ADSs may not know about the meeting far enough in advance to withdraw those ordinary shares. If we ask for the instructions of holders of ADSs, the depositary, upon timely notice from us, will notify holders of ADSs of the upcoming vote and arrange to deliver our voting materials to them. Upon our request, the depositary will mail to holders of ADSs a shareholder meeting notice which contains, among other things, a statement as to the manner in which voting instructions may be given, including an express indication that such instructions may be given or deemed given to the depositary to give a discretionary proxy to a person designated by us if no instructions are received by the depositary from holders of ADSs on or before the response date established by the depositary. However, no voting instruction shall be deemed given and no such discretionary proxy shall be given with respect to any matter as to which we inform the depositary that (i) substantial opposition exists, or (ii) such matter materially and adversely affects the rights of shareholders. We cannot guarantee that holders of ADSs will receive the voting materials in time to ensure that they can instruct the depositary to vote their shares. In addition, the depositary’s liability to holders of ADSs for failing to execute voting instructions or for the manner of executing voting instructions is limited by the deposit agreement. As a result, holders of ADSs may not be able to exercise their right to give voting instructions or to vote in person or by proxy and they may not have any recourse against the depositary or our company if their shares are not voted as they have requested or if their shares cannot be voted.

Table of Contents

You may not receive distributions on our ordinary shares represented by the ADSs or any value for them if it is illegal or impractical to make them available to holders of ADSs.

Under the terms of the deposit agreement, the depositary for the ADSs has agreed to pay to you the cash dividends or other distributions it or the custodian receives on our ordinary shares or other deposited securities after deducting its fees and expenses. You will receive these distributions in proportion to the number of our ordinary shares your ADSs represent. However, in accordance with the limitations set forth in the deposit agreement, it may be unlawful or impractical to make a distribution available to holders of ADSs. We have no obligation to take any other action to permit the distribution of the ADSs, ordinary shares, rights or anything else to holders of ADSs. This means that you may not receive the distributions we make on our ordinary shares or any value from them if it is unlawful or impractical to make them available to you. These restrictions may have a material adverse effect on the value of your ADSs.

We have no present intention to pay dividends on our ordinary shares in the foreseeable future and, consequently, your only opportunity to achieve a return on your investment during that time is if the price of the ADSs appreciates.

We have no present intention to pay dividends on our ordinary shares in the foreseeable future. Any recommendation by our board of directors to pay dividends will depend on many factors, including our financial condition, results of operations, legal requirements and other factors. Furthermore, pursuant to Belgian law, the calculation of amounts available for distribution to shareholders, as dividends or otherwise, must be determined on the basis of our

non-consolidated

statutory financial statements prepared under generally accepted accounting principles in Belgium, or Belgian GAAP. In addition, in accordance with Belgian law and our restated articles of association, we must allocate each year an amount of at least 5% of our annual net profit under our statutory

non-consolidated

accounts (prepared in accordance with Belgian GAAP) to a legal reserve until the reserve equals 10% of our share capital. Our legal reserve currently does not meet this requirement. As a consequence of these facts, there can be no assurance as to whether dividends or other distributions will be paid out in the future or, if they are paid, their amount.

As a foreign private issuer, we are exempt from a number of rules under the U.S. securities laws and are permitted to file less information with the SEC than U.S. domestic issuers. This may limit the information available to holders of ADSs.

We are a “foreign private issuer,” as defined in the rules and regulations of the SEC and, consequently, we are not subject to all of the disclosure requirements applicable to U.S. domestic issuers. For example, we are exempt from certain rules under the Exchange Act that regulate disclosure obligations and procedural requirements related to the solicitation of proxies, consents or authorizations applicable to a security registered under the Exchange Act. In addition, our officers, directors and principal shareholders are exempt from the reporting and “short-swing” profit recovery provisions of Section 16 of the Exchange Act and related rules with respect to their purchases and sales of our securities. Moreover, we are not required to file periodic reports and consolidated financial statements with the SEC as frequently or as promptly as U.S. domestic issuers. Accordingly, there may be less publicly available information concerning our company than there is for U.S. public companies. As a foreign private issuer, we file an annual report on Form

20-F

within four months of the close of each year ended December 31 and furnish reports on Form

6-K

relating to certain material events promptly after we publicly announce these events. However, although we intend to continue to issue quarterly financial information, because of the above exemptions for foreign private issuers, we are not required to do so, and, therefore, our shareholders will not be afforded the same protections or information generally available to investors holding shares in public companies organized in the United States.

We may lose our foreign private issuer status in the future, which could result in significant additional costs and expenses.

As a foreign private issuer, we are not required to comply with all the periodic disclosure and current reporting requirements of the Exchange Act and related rules and regulations. The determination of foreign private issuer status is made annually on the last business day of an issuer’s most recently completed second fiscal quarter. Accordingly, we will next make a determination with respect to our foreign private issuer status on June 30, 2022. There is a risk that we will lose our foreign private issuer status in the future.

We would lose our foreign private issuer status if, for example, more than 50% of our assets are located in the United States and more than 50% of our outstanding ordinary shares are held of record by U.S. residents. As of December 31, 2021, 1.7% of our assets were located in the United States. The regulatory and compliance costs to us under U.S. securities laws as a U.S. domestic issuer may be significantly greater than the costs we incur as a foreign private issuer. If we are not a foreign private issuer, we will be required to file periodic reports and registration statements on U.S. domestic issuer forms with the SEC, which are more detailed and extensive in certain respects than the forms available to a foreign private issuer. We would be required under current SEC rules to prepare our consolidated financial statements in accordance with U.S. GAAP and modify certain of our policies to comply with corporate governance practices associated with U.S. domestic issuers. Such conversion and modifications would involve significant additional costs. In addition, we may lose our ability to rely upon exemptions from certain corporate governance requirements on U.S. stock exchanges that are available to foreign private issuers such as the ones described above and exemptions from procedural requirements related to the solicitation of proxies.

We have identified a material weakness in our internal controls over financial reporting and if we fail to establish and maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial condition, results of operations or cash flows, which may adversely affect investor confidence in us.

The Sarbanes-Oxley Act requires, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. In particular, we are required, under Section 404 of the Sarbanes-Oxley Act, to perform system and process evaluations and testing of our internal controls over financial reporting to allow management and our independent registered public accounting firm to report on the effectiveness of our internal control over financial reporting. This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by our management or our independent registered public accounting firm. A material weakness is a control deficiency, or combination of control deficiencies, in internal control over financial reporting that results in more than a reasonable possibility that a

Table of Contents

material misstatement of annual or interim consolidated financial statements will not be prevented or detected on a timely basis. Section 404 of the Sarbanes-Oxley Act also generally requires an attestation from our independent registered public accounting firm on the effectiveness of our internal control over financial reporting. Our independent registered public accounting firm may issue a report that is adverse in the event it is not satisfied with the level at which our controls are documented, designed or operating. Our remediation efforts may not enable us to avoid a material weakness in the future.

Although we have implemented an internal control system and devoted significant resources to internal audit, accounting, IT and other functions to improve our internal control system, our compliance with Section 404 will require that we incur further substantial accounting expenses and continue to expend significant management efforts to further implement and maintain our internal control system. We may not be able to further implement or maintain an effective internal control system or complete our evaluation, testing and any required remediation in a timely fashion. In connection with the preparation of this annual report, during the evaluation and testing process, we identified a material weakness in our internal control over financial reporting, and concluded that our internal control over financial reporting was not effective as of December 31, 2021 (see “Item 15. Controls and Procedures.”). We cannot assure you that we will be able to remedy the material weakness in a timely fashion or at all, or that there will not be material weaknesses or significant deficiencies in our internal control over financial reporting in the future. Any failure to maintain internal control over financial reporting could severely inhibit our ability to accurately report our financial condition, results of operations or cash flows. If we are unable to remedy the material weakness and conclude that our internal control over financial reporting is effective, or if our independent registered public accounting firm determines we have a material weakness or significant deficiency in our internal control over financial reporting, we could lose investor confidence in the accuracy and completeness of our financial reports, the market price of the ADSs could decline, and we could be subject to sanctions or investigations by the Nasdaq Stock Market, the SEC or other regulatory authorities. Failure to remedy any material weakness in our internal control over financial reporting, or to implement or maintain other effective control systems required of public companies, could also restrict our future access to the capital markets.

We have incurred and will incur significant increased costs as a result of operating as a company whose ADSs are publicly traded in the United States, and our management is required to devote substantial time to new compliance initiatives.

As a company whose ADSs are publicly traded in the United States, we have incurred and will incur significant legal, accounting, insurance and other expenses that we did not incur prior to our initial public offering. In addition, the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act and related rules implemented by the SEC and the Nasdaq Stock Market have imposed various requirements on public companies, including requiring establishment and maintenance of effective disclosure and financial controls. These costs have increased now that we are no longer an emerging growth company eligible to rely on exemptions under the JOBS Act from certain disclosure and governance requirements. Our management and other personnel need to devote a substantial amount of time to these compliance initiatives. Moreover, these rules and regulations increase our legal and financial compliance costs and make some activities more time-consuming and costly. These laws and regulations could also make it more difficult and expensive for us to attract and retain qualified persons to serve on our board of directors or its committees. Furthermore, if we are unable to satisfy our obligations as a public company, we could be subject to delisting of the ADSs, fines, sanctions and other regulatory action and potentially civil litigation.

In order to satisfy our obligations as a U.S. public company, we may need to hire or engage additional qualified accounting and financial personnel and consultants with appropriate experience.

As a U.S. public company, we are required to establish and maintain effective internal controls over financial reporting and disclosure controls and procedures. In order to establish and maintain this control environment, we have hired accounting and financial personnel and engaged consultants with experience and technical accounting knowledge, but we may need to hire or engage additional personnel and consultants to further our efforts. It is difficult to recruit and retain qualified personnel and consultants, and our operating expenses and operations have been and may continue to be impacted by the costs of their employment or engagement. Further, these efforts may divert management’s attention from their

day-to-day

responsibilities.

You may be subject to limitations on the transfer of your ADSs.

Your ADSs are transferable on the books of the depositary. However, the depositary may close its books at any time or from time to time when it deems doing so expedient in connection with the performance of its duties. The depositary may close its books from time to time for a number of reasons, including in connection with corporate events such as a rights offering, during which time the depositary needs to maintain an exact number of ADS holders on its books for a specified period. The depositary may also close its books in emergencies, and on weekends and public holidays. The depositary may refuse to deliver, transfer or register transfers of the ADSs generally when our share register or the books of the depositary are closed, or at any time if we or the depositary thinks that it is advisable to do so because of any requirement of law or of any government or governmental body, or under any provision of the deposit agreement, or for any other reason in accordance with the terms of the deposit agreement. As a result, you may be unable to transfer your ADSs when you wish to.

If securities or industry analysts do not publish research or reports about our business, or if they adversely change their recommendations regarding the ADSs, the market price for the ADSs and trading volume could decline.

The trading market for the ADSs is influenced by research or reports that industry or securities analysts publish about our business. If one or more analysts who cover us downgrade the ADSs, the market price for the ADSs would likely decline. If one or more of these analysts cease to cover us or fail to regularly publish reports on us, we could lose visibility in the financial markets, which, in turn, could cause the market price or trading volume for the ADSs to decline.

Table of Contents

It may be difficult for investors outside Belgium to serve process on or enforce foreign judgments against us or our directors and senior management.

We are a Belgian limited liability company. None of the members of our board of directors and senior management is a resident of the United States. All or a substantial portion of the assets of such

non-resident

persons and most of our assets are located outside the United States. As a result, it may not be possible for investors to effect service of process upon such persons or on us or to enforce against them or us a judgment obtained in U.S. courts. Original actions or actions for the enforcement of judgments of U.S. courts relating to the civil liability provisions of the federal or state securities laws of the United States are not directly enforceable in Belgium. The United States and Belgium do not currently have a multilateral or bilateral treaty providing for reciprocal recognition and enforcement of judgments, other than arbitral awards, in civil and commercial matters. In order for a final judgment for the payment of money rendered by U.S. courts based on civil liability to produce any effect on Belgian soil, it is accordingly required that this judgment be recognized or be declared enforceable by a Belgian court in accordance with Articles 22 to 25 of the 2004 Belgian Code of Private International Law. Recognition or enforcement does not imply a review of the merits of the case and is irrespective of any reciprocity requirement. A U.S. judgment will, however, not be recognized or declared enforceable in Belgium if it infringes upon one or more of the grounds for refusal which are exhaustively listed in Article 25 of the Belgian Code of Private International Law. These grounds mainly require that the recognition or enforcement of the foreign judgment should not be a manifest violation of public policy, that the foreign courts must have respected the rights of the defense, that the foreign judgment should be final, and that the assumption of jurisdiction by the foreign court may not have breached certain principles of Belgian law. In addition to recognition or enforcement, a judgment by a federal or state court in the United States against us may also serve as evidence in a similar action in a Belgian court if it meets the conditions required for the authenticity of judgments according to the law of the state where it was rendered. The findings of a federal or state court in the United States will not, however, be taken into account to the extent they appear incompatible with Belgian public policy.

Holders of ADSs are not treated as shareholders of our company.

Holders of ADSs with underlying shares in a Belgian limited liability company are not treated as shareholders of our company, unless they withdraw our ordinary shares underlying the ADSs that they hold. The depository is the holder of the ordinary shares underlying the ADSs. Holders of ADSs therefore do not have any rights as shareholders of our company, other than the rights that they have pursuant to the deposit agreement.

We are a Belgian limited liability company but are not a listed company in Belgium, and shareholders of our company may have different and in some cases more limited shareholder rights than shareholders of a listed company in Belgium or of a U.S. listed corporation.

We are organized as a limited liability company (naamloze vennootschap / société anonyme) under the laws of Belgium. Our corporate affairs are governed by Belgian corporate law. From a Belgian corporate law point of view, we do not qualify as a listed company (genoteerde vennootschap / société cotée) because none of our securities are listed on any regulated market in the EEA. The Belgian corporate law provisions that are applicable to Belgian listed companies do therefore not apply to us. Furthermore, we are not subject to most of the disclosure obligations applicable to Belgian listed companies. As a result, shareholders of our company may not enjoy certain of the rights and protection generally afforded to shareholders of a Belgian listed company. You should also be aware that the rights provided to our shareholders under Belgian corporate law and our restated articles of association differ in certain respects from the rights that you would typically enjoy as a shareholder of a U.S. corporation under applicable U.S. federal and state laws.

Under Belgian corporate law, except in certain limited circumstances, our shareholders may not ask for an inspection of our corporate records, while under Delaware corporate law any shareholder, irrespective of the size of his or her shareholdings, may do so. Shareholders of a Belgian corporation are also unable to initiate a derivative action, a remedy typically available to shareholders of U.S. companies, in order to enforce a right of our company, in case we fail to enforce such right ourselves, other than in certain cases of director liability under limited circumstances. In addition, a majority of our shareholders may release a director from any claim of liability we may have, including if he or she has acted in bad faith or has breached his or her duty of loyalty, provided, in some cases, that the relevant acts were specifically mentioned in the convening notice to the shareholders’ meeting deliberating on the discharge. In contrast, most U.S. federal and state laws prohibit a company or its shareholders from releasing a director from liability altogether if he or she has acted in bad faith or has breached his or her duty of loyalty to the company. Finally, Belgian corporate law does not provide any form of appraisal rights in the case of a business combination. For additional information on these and other aspects of Belgian corporate law and our restated articles of association, see “Item 10. Additional Information—B. Memorandum and Articles of Association.” As a result of these differences between Belgian corporate law and our restated articles of association, on the one hand, and U.S. federal and state laws, on the other hand, in certain instances, you could receive less protection as a shareholder of our company than you would as a shareholder of a U.S. corporation.

As a foreign private issuer, we are not subject to certain Nasdaq Stock Market corporate governance rules applicable to U.S. listed companies.

We rely on provisions in the Listing Rules of the Nasdaq Stock Market that permit us to follow our home country corporate governance practices with regard to certain aspects of corporate governance. This allows us to follow Belgian corporate law and the Belgian Code of Companies and Associations, which differ in significant respects from the corporate governance requirements applicable to U.S. companies listed on the Nasdaq Global Select Market. See “Item 16G. Corporate Governance.”

Table of Contents

Holders of ADSs or ordinary shares have limited rights to call shareholders’ meetings or to submit shareholder proposals, which could adversely affect their ability to participate in the governance of our company.

Except under limited circumstances, only the board of directors may call a shareholders’ meeting. Shareholders who collectively own at least 10% of the ordinary shares of our company may require the board of directors or the statutory auditor to convene a special or an extraordinary general meeting of shareholders. As a result, the ability of individual holders of the ADSs or ordinary shares to influence the governance of our company is limited.

Holders of the ADSs have limited recourse if we or the depositary fail to meet our respective obligations under the deposit agreement or if they wish to involve us or the depositary in a legal proceeding.

The deposit agreement expressly limits the obligations and liability of us and the depositary. Neither we nor the depositary will be liable to the extent that liability results from the fact that we:

•

are prevented or hindered in performing any obligation by circumstances beyond their control;

•

exercise or fail to exercise discretion under the deposit agreement;

•

perform our obligations without negligence or bad faith;

•

take any action based upon advice of or information from legal counsel, accountants, any person presenting shares for deposit, any holder of the ADSs or any other qualified person; or

•

rely on any documents we believe in good faith to be genuine and properly executed.

In addition, neither we nor the depositary has any obligation to participate in any action, suit or other proceeding in respect of the ADSs which may involve it in expense or liability unless it is indemnified to its satisfaction. These provisions of the deposit agreement will limit the ability of holders of the ADSs to obtain recourse if we or the depositary fails to meet our respective obligations under the deposit agreement or if they wish to involve us or the depositary in a legal proceeding.

Investors may not be able to participate in equity offerings, and ADS holders may not receive any value for rights that we may grant.

In accordance with Belgian corporate law, our restated articles of association provide for preferential subscription rights to be granted to our existing shareholders to subscribe on a pro rata basis for any issue for cash of new shares, convertible bonds or warrants that are exercisable for cash, unless such rights are cancelled or limited by resolution of our shareholders’ meeting or the board of directors. Our shareholders’ meeting or board of directors may cancel or restrict such rights in future equity offerings. In addition, certain shareholders (including those in the United States, Australia, Canada or Japan) may not be entitled to exercise such rights even if they are not cancelled unless the rights and related shares are registered or qualified for sale under the relevant legislation or regulatory framework. As a result, there is the risk that investors may suffer dilution of their shareholding should they not be permitted to participate in preference right equity or other offerings that we may conduct in the future.

If rights are granted to our shareholders, as the case may be, but if by the terms of such rights offering or for any other reason, the depositary may not either make such rights available to any ADS holders or dispose of such rights and make the net proceeds available to such ADS holders, then the depositary may allow the rights to lapse, in which case ADS holders will receive no value for such rights.

Shareholders in jurisdictions with currencies other than the euro face additional investment risk from currency exchange rate fluctuations in connection with their holding of our shares.

Any future payments of dividends on shares will be denominated in euro. The U.S. dollar—or other currency—equivalent of any dividends paid on our shares or received in connection with any sale of our shares could be adversely affected by the depreciation of the euro against these other currencies.

We do not expect to be a passive foreign investment company, or a PFIC. However, the relevant rules are not entirely clear and certain aspects of the tests will be outside our control; therefore, no assurance can be given that we will not be classified as a PFIC for any taxable year. If you are a U.S. taxpayer and we are determined to be a PFIC at any time during your holding period, you may be subject to materially adverse consequences, including additional tax liability and tax filing obligations. See “Item 10. Additional Information—E. Taxation—U.S. Taxation—Passive Foreign Investment Company.”

Table of Contents

Changes in our United States federal income tax classification, or that of our subsidiaries, could result in adverse tax consequences to our 10% or greater U.S. shareholders.

We do not believe that we, or any of

our non-U.S. subsidiaries,

are controlled foreign corporations (“CFCs”) based upon the ADSs or shares owned directly by U.S. shareholders. However, we or certain of

our non-U.S. subsidiaries

may be classified as CFCs depending on the U.S. holdings of certain of

our non-U.S. shareholders.

This classification could cause significant and adverse U.S. tax consequences for our U.S. shareholders that own, or are considered to own, as a result of the attribution rules, 10% or more of the voting power or value of the stock of us or

our non-U.S. subsidiaries

(a “10% U.S. shareholder”) or any person who becomes a 10% U.S. shareholder under the U.S. Federal income tax law applicable to owners of CFCs. Therefore, we would advise our 10% U.S. shareholders (if any) and persons considering becoming 10% U.S. shareholders to consult their tax advisors regarding the U.S. Federal income tax law applicable to owners of CFCs.

Table of Contents

ITEM 4.

INFORMATION ON THE COMPANY

A. History and Development of the Company

Materialise NV was incorporated in Belgium on June 28, 1990 as a limited liability company under Belgian company law.

On April 9, 2021, we acquired an option to buy Link3D Inc., which we exercised on November 15, 2021. We closed the acquisition on January 4, 2022. This acquisition was effectuated through our U.S. subsidiary, Materialise USA, LLC. As a result of this transaction, Materialise USA has become the sole shareholder of Link3D. Link3D is an additive workflow and digital manufacturing software company. The acquisition of Link3D is intended to strengthen and accelerate the creation of the Materialise software platform.

On June 22, 2021, together with Zhenyuan (Tianjin) Medical Appliances Technology Co., Ltd., we incorporated a Chinese joint venture with the name Tianjin Zhenyuan Materialise Medical Technology Limited Company. We hold 51% of the shares of this joint venture.

On October 8, 2021, we acquired the remaining 16.66% of the shares in Rapidfit NV, making us Rapidfit’s sole shareholder.

On January 2022, we filed a voluntary application to strike Materialise UK off the UK company register. A notice in this respect was published in The London Gazzette on February 8, 2022. As a result, Materialise UK has been struck off the register and was dissolved on April 26, 2022.

Our principal executive and registered offices are located at Technologielaan 15, 3001 Leuven, Belgium. Our telephone number is +32 (16) 39 66 11. We are registered with the Register of Legal Entities of Leuven under the number 0441.131.254. Our agent for service of process in the United States is Materialise USA, LLC, located at 44650 Helm Ct., Plymouth, Michigan 48170, telephone number

(734) 259-6445.

Our internet website is www.materialise.com. The information contained on, or accessible through, our website is not incorporated by reference into this annual report and should not be considered a part of this annual report.

The SEC maintains an internet website that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at www.sec.gov.

Capital Expenditures (Property Plant and Equipment and Intangible Assets)

Our capital expenditures amounted to €11.7 million €17.7 million and €15.7 million for the years ended December 31, 2021, 2020, and 2019, respectively. In 2021, our main capital expenditures were € 1.7 million for our internal digital transformation program, € 1.0 million for the transformation of our platform architecture, € 0.8 million for patents, € 1.6 million for a new building in Germany, € 0.5 million for a new metal factory in the United States and € 2.7 million for new machinery and installations in Belgium, Germany, Poland and the United States. In 2020, our main capital expenditures were €2.8 million for office software, €2.2 million for our internal digital transformation program, €0.7 million for medical projects, €4.9 million for the new building in Germany and €7.1 million for new machinery and installations in Belgium, Germany, Poland, Brazil and the United States.

B. Business Overview

Our Mission

Our mission is to innovate product development that results in a better and healthier world, through our software and hardware infrastructure, and an

in-depth

knowledge of additive manufacturing.

Our Company

We are a leading provider of additive manufacturing and medical software and of sophisticated 3D printing services. With our knowledge, products and services, we empower our customers’ use of additive manufacturing technology, in general, and we enable certain specific and significant applications of additive manufacturing, in particular. In both instances, we seek to empower the choice for sustainability through the use of additive manufacturing.

The customers of our general software tools and 3D printing services are active in a wide variety of industries, including healthcare, automotive, aerospace, art and design and consumer products. The significant additive manufacturing applications that we are more deeply and more directly involved in currently include applications for cranio maxillo facial, eyewear, footwear and measurement fixtures.

As of December 31, 2021, our team consisted of 2,332 full-time equivalent employees, or FTEs, and fully dedicated consultants. Our portfolio of intellectual property featured 385 patents and 143 pending patent applications as of December 31, 2021. For the year ended December 31, 2021, we generated € 205.5 million of revenue, representing a 21% decrease over the prior year, a net profit of € 13.1 million and Adjusted EBITDA of € 32 million. For a description of Adjusted EBITDA and a reconciliation of our net profit to our Adjusted EBITDA, see “Item 5. Operating and Financial Review and Prospects—A. Operating Results—Other Financial Information.”

Table of Contents

Our Core Competencies

Our established and proven business model integrates our three research-based core competencies: (i) software development, (ii) 3D printing, and (iii) engineering for 3D printing, which act as complementary incubators for our new products and function as integrated support centers for our existing products. The interaction and synergies among our software development, 3D printing and engineering teams position us well to continuously develop and support innovative applications of 3D printing that often integrate all three core competencies.

Software Development (Software).

Our expertise in developing 3D printing software originated from our efforts to enable 3D printing applications and to continually improve processes within our own additive manufacturing operations. As a result of our continued deployment over the course of 30 years of human, intellectual and economic capital to software development, a number of our products, including Magics and Mimics, have evolved into industry-leading flagship products. We have an established quality management system for the development of our software products that is ISO 9001:2015 certified. We are also ISO 13485:2016 certified for our medical applications and our medical applications comply with the regulatory requirements of several jurisdictions, including Europe and the United States.

3D Printing (Hardware).

As a pioneer in the additive manufacturing industry, we have an extensive history of 3D printing millions of parts utilizing a broad array of technologies, often in highly regulated environments, for thousands of commercial, industrial and medical customers. We operate some of the most sophisticated printing machines currently available on the market, as well as our own proprietary stereolithography-based technology, Mammoth, to provide a very broad range of technologies, sizes, materials and finishing degrees and to address the needs of customers across a large number of potential markets. Production is organized in multiple production lines that are dedicated to the Medical and the Industrial Production segments that we serve. Our 3D printing group, which operates in an ISO 9001:2015-certified quality management system, in an ISO 13485:2016-certified system for the production of medical devices, and in an EN9100:2016 as well as EASA Part 21G POA certified system for the production of plastic aerospace parts, has its own maintenance and research team that utilizes an

in-house

laboratory facility where products can be tested. The wide variety of products that are processed by our multiple production lines are logistically streamlined through our proprietary database systems that manage the entire process from order intake to 3D printing to final shipment.

Engineering (Mindware).

Our engineering expertise is integral to our entire business, as it enhances our software development and 3D printing expertise. Our engineers work in teams that support customers in different market segments. These teams work directly with our customers to identify new, and customize and refine existing, 3D printing applications and to increase productivity, efficiency and ease of use across all aspects of the solutions we provide. Our engineering teams have particular expertise in industrial and medical applications, including patient-specific surgical guides, models and implants with the applicable market clearances. Our teams are highly specialized, especially in the medical field, and include quality controllers, development researchers for new hardware concepts and trainers who bring new engineers to the required level of expertise. Our engineers operate within the framework of a certified quality management system. Our engineering teams make extensive use of our proprietary software tools and have direct access to our 3D printing center where developments can be tested in an actual production environment.

Our Market Segments

The product and service offerings developed by our three core competencies are offered through a market oriented organization that is active across three principal market segments: (i) Materialise Software, (ii) Materialise Medical, and (iii) Materialise Manufacturing. We believe that our customers benefit significantly from the synergistic interplay between our core competencies and the three market segments on which we focus and which provide

constant end-user feedback

to the product development and support teams within our core competencies.

Our discussion below of the growth opportunities for each of our market segments is based on our medium- and long-term expectations for these segments. In the short term, we expect both the 3D printing industry and our business will be impacted by the ongoing COVID-19 pandemic, although we cannot predict with certainty the impact the pandemic will have. For more information, see “Item 5. Operating and Financial Review and Prospects—D. Trend Information” below.

Our Materialise Software Segment

In our Materialise Software segment, we offer proprietary software worldwide through programs and platforms that enable companies to set up efficient, reliable and sustainable 3D printing production. Our software supports 3D printing service bureaus both large and small that are producing a variety of parts for their customers and addresses the needs of large corporations producing at volume, either through significant serial manufacturing or mass customization. In all of these environments, we believe our software enables both operational excellence and flexibility. We work directly with many 3D printing machine manufacturers to enable and enhance the functionality of 3D printers and of 3D printing operations. We have developed software that interfaces between almost all types of industrial 3D printers, and various software applications and capturing technologies, including CAD/CAM packages and 3D scanners, by enabling data preparation and process planning and execution. Our programs interface with machines manufactured by leading original equipment manufacturers, or OEMs, such as Sindoh Co. Ltd., EOS GmbH, Essentium Inc., HP Inc., The ExOne Company, Renishaw PLC, SLM Solutions Group AG, Stratasys Ltd., Trumpf GmbH & Co. KG, Uniontech Corporation, Desktop Metal and Voxeljet AG. In addition, we have entered into partnership agreements with leading CAD, CAM and product lifecycle management, or PLM, companies such as Siemens, HCL Technologies Ltd., or HCL, and PTC, for the integration of our additive manufacturing technology into Siemens’ NX software, HCL’s CAMworks, and PTC’s Creo software. This enables the streamlining of the design to manufacturing process for products being produced using additive manufacturing. We offer software that enables our customers to more efficiently organize the entire workflow of a 3D printing operation with multiple 3D printing machines, many operators and complex data flow and logistical requirements. We believe that the capabilities of our software products and their unique compatibility with many 3D printing systems continue to set standards in the professional 3D printing software market. Customers operating machines from multiple OEMs and customers running large 3D printing operations are among those who can benefit the most from our software packages and we believe that in many cases those customers demand compatibility with our software from the systems of OEMs.

Table of Contents

As of December 31, 2021, our Materialise Software segment had a team of approximately 281 FTEs and fully dedicated consultants, with approximately 37.4% based at our headquarters in Belgium and the remaining employees distributed throughout our local field offices in China, Germany, Japan, Malaysia, Ukraine, the United Kingdom and the United States.

On January 4, 2022, we completed the acquisition of Link3D and began the integration of Link3D into our Materialise Software segment. The completion of this integration will allow us to expedite the realization of our plans for a cloud-based platform.

Business Model.

We generate revenue in our Materialise Software segment from our software licenses, maintenance contracts, hardware controller sales for our Materialise Controllers and custom software development services. Additionally, we offer consultancy and training services. We license our software products to our customers on either a time-based or perpetual basis, in which case we offer annual maintenance contracts that provide for software updates and support. In addition, we also announced a number of cloud-based solutions that were released in 2021 or are scheduled to be released in 2022. Making use of, among others, the cloud-based platform that has been developed by Link3D, we are significantly accelerating the migration of our software solutions to the cloud, which we intend to offer along with our license-based solutions. We charge our custom software development services either on a time and material or on a fixed-cost basis. For the years ended December 31, 2021, 2020 and 2019, our Materialise Software segment generated revenue of € 42.9 million, € 39.1 million, € 41.7 million, respectively 20.9%, 22.9%, 21.2% of our total revenue.

Software Products.

We have a diversified portfolio comprised of software applications addressing different 3D printing market opportunities. Our decades of experience in the additive manufacturing industry are reflected in the sophisticated 3D printing software and business management tools we provide for our customers. We believe that each of our software applications is, or has the potential of becoming, one of the leading technologies in its domain. We believe that our neutral platform approach positions our software to drive greater innovation and choice across the 3D printer software ecosystem, and provides 3D printer users with more powerful and flexible printing capabilities.

In particular, we offer the following software applications:

•

Magics.

Magics enables customers to import a wide variety of CAD formats and to export standard tessellation language, or STL, files ready for additive manufacturing. Magics’ applications include repairing and optimizing 3D models; analyzing parts; making process-related design changes on customers’ STL files; designing support structures; documenting customer projects; nesting multiple parts in a single print run; and process planning.

Our Magics platform is enhanced with modules that further expand functionality and utility for our customers. For instance, the Magics Import Module plays an important role in efficiently moving CAD designs through to manufactured products by importing nearly all standard CAD formats into Magics. The Magics Structures Module was designed to help customers to reduce weight and material usage in their designs. We also have developed logistical modules such as the Magics SG Module, which offers tools for support structure design during the 3D printing process, and the Magics Sintermodule, which offers solutions for automated part nesting, protecting small and fragile parts and locating them after building. The Magics Simulation Module enables our users to simulate the build process virtually, and optimizes the build preparation based on the results of such simulation, thus reducing build failures and improving the results.

In addition to offering

state-of-the-art

data preparation functionality to our users, our Magics platform also focuses on automation and other productivity improvements and brings interconnectivity to machines and enterprise software platforms.

Further, we recently won the 2021 3DPrinting Industry’s “Software Tool or Company of the Year” award for our Magics software.

Specific versions of the Magics application were also brought to the market by us, including Magics Essentials (an entry-level package offering premium data preparation functionality), Magics Print (combining the most important build preparation tools and straightforward build file generation technology) and MiniMagics/MiniMagicsPro (providing viewing, communication and quoting solutions for our customers working in data preparation, or in quoting and quality control teams). Users of Magics Essentials and Magics Print can upgrade to our expert Materialise Magics platform if they want the full data and build preparation functionality at their disposal in one package.

•

Link3D.

Link3D is an additive workflow and digital manufacturing software platform that supports customers in major manufacturing industries to scale and integrate their additive manufacturing operations across complex supply chains and IT environments. The Link3D platform provides a suite of applications that are instrumental to organizations scaling their additive manufacturing capability. These solutions enable organizations to plan, manage, and optimize their operations. The platform includes centralized order management, quoting & costing, production planning, production scheduling, postproduction management, quality management and manufacturing analytics.

•

Streamics.

Complementary with Magics is our Streamics product, which is a central additive manufacturing logistics and control system that links operators, 3D printers (including those from various OEMs and based on different technologies), processes, materials and shipment flows together to improve customer service and save time and money. Streamics provides a user-friendly, server-based system, which centralizes our customers’ project data and makes it easier to collaborate among team members and communicate with customers. The configurable modules are designed to facilitate communication, support the organization and execution of data preparation, plan machine capacity, and guide post-processing steps, allowing additive manufacturing teams to quickly adapt to business and market changes. Gradually, Streamics functionality will be migrated to the Link3D platform, and as this happens, a transition plan will be set up to migrate existing Streamics customers to the Link3D platform over the coming years. In the meantime, we will continue to maintain and support Streamics and its customers.

Table of Contents

•

3-maticSTL.

3-maticSTL

is a versatile application that permits, among other things, design modification, design simplification, 3D texturing,

re-meshing

and forward engineering directly to standard additive manufacturing STL files. Using Materialise consultancy services, targeted design automation solutions can be created for specific workflows.

•

Build Processors.

We work in close collaboration with a wide variety of 3D printer OEMs to develop customized and integrated solutions for their additive manufacturing machines. Our build processors automatically translate the 3D model data into layer data to provide sliced geometry and can link the latter with the appropriate build parameters to feed the machine control software. Another key benefit of our build processors is that they allow for a

two-way

communication between Magics and 3D printers. We also develop the metal build processors in Materialise Bremen and as a consequence we are able to cover a wide range of metal 3D printers. Furthermore, licensing and integrating our build processor framework, companies such as Siemens and PTC can also leverage the extensive ecosystem of build processors we have developed together with OEMs. Over the past years, we have transformed the architecture of our build processor to a cloud-native solution. Next to the standard build flows, the architecture also allows for custom

fit-for-purpose

build pipelines to be scripted, enabling companies and 3D printer machine vendors alike to adapt and optimize the behavior and output of the build processor. We believe this is very valuable in the context of volume production.

•

e-Stage.

e-Stage

is a software solution that increases additive manufacturing productivity by automating STL support generation, optimizing the STL build process, and reducing the time our customers spend on finishing work such as build support removal and sanding.

e-Stage

is designed to allow our customers to use less material, to be able to 3D nest and to minimize failed builds.

e-Stage

for plastic has been commercially available since September 2007, and in the fall of 2017, we released

e-Stage

for metal. In 2018, we won the TCT SOFTWARE AWARD 2018 for

e-Stage

for metal.

•

Materialise Controller.

Materialise Controller controls and steers additive manufacturing machines using embedded Materialise software, and is fully integrated into the Materialise 3D printing software platform. It is engineered towards research and development applications, machine manufacturers and those who want to control or adapt the production process to their specific needs.

•

Materialise Storefront.

A new cloud-based

e-commerce

solution, to be launched early 2022, which automates the intake and sales process of 3D printing factories and facilitates communication with customers. Storefront supports automatic and manual price calculation and quoting, AM data preparation, order management and integration with payment and shipment providers.

•

Materialise Process Tuner.

an intuitive online platform that helps manufacturing companies, service bureaus and machine builders speed up the process tuning that is required for mass-manufacturing 3D printed parts. The Materialise Process Tuner can be accessed via a

web-browser

as well as through an API, making it the company’s first cloud-native Magics application. Companies can also choose to deploy and run the application on site.

•

Materialise Workflow Automation.

This solution enables the user to leverage the full power of the Materialise Software technology (as also available through Materialise Magics) in creating specific

end-to-end

workflows, which can be executed automatically and autonomously, or can be called from other software solutions like Magics. Workflow Automation provides the possibility to script simple workflows or to create complex business process workflows using a graphical user interface. The workflows can be executed in the cloud, on premise or on the user’s workstation.

Sales

and Marketing.

We market and distribute our software directly through our sales force as well as through our own website and third party distributors. Our Belgian team oversees our global marketing strategy and sales processes. Our local field office employees manage sales for particular markets and provide

pre-

and post-sales technical support to our customers. We also utilize a growing network of distributors and resellers to bring our solutions to specific regions or market segments. In addition, machine manufacturers and their local dealers often distribute our software products together with their 3D printers, with our software enhancing the printers’ value proposition and broadening the suite of applications available to the machines.

Customers.

The customers for our Materialise Software segment include 3D printing machine manufacturers as well as production companies and contract manufacturers in a variety of industries, such as the automotive, aerospace, consumer goods and hearing aid industries, and external 3D printing service bureaus. Our Materialise Software segment customer base is spread across Asia, Europe and the Americas.

Competition.

In our Materialise Software segment, we face indirect competition from the software developed by 3D printing OEMs, which are often more “closed ecosystem”-oriented (i.e., only focused on their own machines), and from companies that offer software that addresses one or more specific functional areas covered by our software solutions, such as providers of traditional CAD solutions. We compete directly with other providers of additive manufacturing management and machine control software, including open source software providers.

Growth Opportunities.

We believe that 3D printing will be increasingly used for the manufacturing of complex or customized end parts, and expect that the number of 3D printer manufacturers will increase accordingly, with certain new players initially focusing more on the hardware than on the software component of their 3D printers. Hence, we anticipate that the demand for highly performing industrial 3D printing software platforms will grow accordingly. The new products that we have developed and are developing, including the products of Link3D, Process Tuner, Workflow Automation and

fit-for-purpose

build processors specifically address what we believe will be the needs of this growing end part manufacturing market.

Table of Contents

We believe that we can continue to expand our market penetration through expanding relationships with customers and OEMs, and through the continued innovation of our software products to adapt to and meet market demands. In order to be able to do so, we intend to bring our teams closer to our customer base worldwide, which will require continued investments in the expansion of our marketing and sales presence. In order to be able to meet the demands of new entrants on the market and to better address the needs of the end parts market, we also intend to continue to invest significantly in the development of our software tools and solutions, including furthering their compatibility with as many 3D printers on the market as possible.

Table of Contents

Our Materialise Medical Segment

In our Materialise Medical segment, our product and services offering addresses what we believe to be long-term trends in the medical industry towards personalized, functional and evidence-based medicine.

As of December 31, 2021, our Materialise Medical segment consisted of approximately 861 FTEs and fully dedicated consultants, with approximately 24.7% based at our headquarters in Belgium and the remaining employees distributed throughout our local offices in Australia, Brazil, China, Colombia, France, Germany, Japan, Malaysia, Ukraine, the United Kingdom and the United States.

Business Model.

We generate revenue in our Materialise Medical segment through the sale of medical software and personalized medical devices. We sell licenses to our medical software packages and software maintenance contracts and sell medical devices that we customize and print for our customers. We also provide custom software development and engineering services, for which we charge either on a time and material or fixed-cost basis. The majority of the medical devices that we printed in 2020 were surgical guides (and related bone models) that were distributed to surgeons through our collaboration partners such as DePuy Synthes, Smith & Nephew, Stryker and Zimmer Biomet. We also print patient-specific implants that we sell directly to hospitals or distribute through partners such as DePuy Synthes. The customer base for our medical software products includes academic institutions, medical device companies and hospitals.

For the years ended December 31, 2021, 2020 and 2019, our Materialise Medical segment generated revenue of € 73.4 million, € 61.7 million and €60.8 million, respectively, representing 35.7%, 36.2% and 30.9% of our total revenue, respectively.

Medical Software.

Our software allows medical-image based analysis, planning and engineering as well as patient-specific design and printing of surgical devices and implants. Our customers include leading research institutes, renowned hospitals and major medical device companies. Our medical software packages often serve as an introduction to our capabilities and in certain cases lead to custom software developments and clinical services opportunities. Our medical software packages are:

•

Materialise Mimics Innovation Suite.

The Materialise Mimics Innovation Suite is a complete set of tools developed for biomedical professionals that allows them to perform a multitude of engineering operations based on medical imaging data. The suite consists of several complementary products and services, including Materialise Mimics, Materialise

3-matic,

engineering services and medical models, as well as consultancy and custom software development.

•

Materialise Mimics.

Materialise Mimics is software addressing medical professionals specifically developed for medical image processing that can be used to segment accurate 3D models from medical imaging data (for example, from CT or MRI) to measure accurately in 2D and 3D and to export 3D models for additive manufacturing or to Materialise

3-matic.

•

Materialise

3-matic.

Materialise

3-matic

focuses on anatomical design and is able to combine CAD tools with

pre-processing

capabilities directly on the anatomical data coming from Materialise Mimics. It enables our customers to conduct thorough 3D measurements and analysis, design a patient-specific implant, a surgical guide, or a benchtop model, and to prepare the anatomical data and/or resulting implants for simulation.

•

Materialise OrthoView.

Materialise OrthoView is a 2D digital

pre-operative

planning and templating solution for orthopedic surgeons. The software imports a digital

X-ray

image from a Picture Archiving and Communication System, or PACS, and positions the templates of suitable prostheses on the

X-ray

image at the correct scale. Materialise OrthoView currently serves more than 15,000 orthopedic surgeons in 60 countries globally, focusing primarily on joint replacements. We acquired OrthoView Holdings Limited in October 2014, and have included the OrthoView solution in our portfolio of

pre-operative

planning solutions.

•

Materialise Mimics inPrint.

With Materialise Mimics inPrint, clinicians can easily create files for 3D printing and use anatomically accurate models to help simulate or evaluate options for patient-specific surgical treatment.

•

Materialise ProPlan CMF.

Materialise ProPlan CMF is a software package developed for oral, maxillofacial, nose, throat and plastic surgeons. The software allows surgeons to

pre-operatively

plan their surgeries in 3D based on (CB)CT or MRI images using a set of tools to analyze, measure and reconstruct the patient’s anatomy. With the software the surgeon can also plan the movements (translations and rotations) of the mandible or maxilla and preplan the reconstruction of defects.

•

Materialise Mimics Enlight.

Materialise Mimics Enlight is a workflow-based planning software that enables companies, clinicians and hospitals to scale 3D planning for procedures. Mimics Enlight is based on the strengths of Materialise’s Mimics Innovation Suite and can be applied in various clinical fields such as structural heart or lung surgery.

•

Materialise Surgicase.

Materialise

Surgicase is an online case management platform that enables medical device companies and hospitals to manage ordering and processing of personalized services and devices.

Clinical Services and Personalized Medical Devices.

Using our

FDA-cleared

and CE compliant medical software, we analyze 3D medical images of patients and provide doctors with virtual surgical planning services for their review and approval. In most cases, we also design and 3D print surgical guides that uniquely fit a specific patient and allow the surgeon to conduct the operation in accordance with the approved surgical plan. In certain circumstances, we deliver 3D printed customized patient-specific medical implants.

Table of Contents

In our 3D printing centers in Belgium, Japan, Brazil, and the United States, we have separate production lines for our Materialise Medical segment.

We believe that our medical image-based simulation and planning software and 3D printing technology can assist hospitals and clinicians in providing personalized care to patients which can contribute to increased quality of life.

In many cases, surgeons using our clinical services work together with our clinical engineers to turn their patients’ medical image data into virtual surgical plans, and patient-specific 3D printed precise surgical and customized anatomical models to optimize intervention planning. For indications such as shoulder surgery, we have optimized and automated our 3D planning capabilities to provide surgical plans within a short timeframe and at a high quality that does not require an anatomical model to be provided. Utilizing our SurgiCase tool, surgeons upload CT or MRI medical image data and submit their cases to us, track their cases and review them as interactive virtual 3D models. In the framework of our collaborations with certain leading medical device companies, our SurgiCase tool is rebranded and adapted to the specific product offering and needs of our collaboration partners.

In many cases surgeons use personalized surgical guides or implants to translate the surgical plan into the operating room. Our 3D printed surgical guides include joint replacement guides for knee, shoulder and hip replacement surgeries, osteotomy guides and CMF guides, and our 3D printed implants

include hip-revision implants,

shoulder and CMF implants. The surgical guides and implants we print for U.S. based patients

are FDA-cleared, and

to the extent required by law, our medical devices

for EEA-based patients

bear the appropriate CE labels.

We address large surgical markets in orthopedics and CMF through collaboration agreements with leading medical device companies, including DePuy Synthes, Zimmer-Biomet, DJO Surgical, and Smith & Nephew. Pursuant to these agreements, we print joint replacement and/or CMF guides that our collaboration partners distribute under their own brands, together with their own implants, in the United States, Canada, South Africa, Latin America, Europe, China, Japan and Australia. We leverage our collaboration partners’ distribution capabilities to extend our reach into these large markets, and our collaboration partners utilize our 3D printing-related expertise to provide surgical planning and customized devices to surgeons.

We also address certain high value-added, specialty applications by providing the full solution ourselves, including the delivery of implants and guides directly to the hospital or surgeon. Such applications include customized CMF implants and guides, hip revision and shoulder implants in a patented porous matrix configuration and osteotomy guides. Through Engimplan, we distribute implants and instruments in Brazil, offering both traditional and 3D printed CMF products as well as a broader portfolio that includes product lines for trauma and sport medicine.

We also work with customers to print anatomical models that may be used for a wide range of applications such as sizing of medical devices, clinical trials, training, patient communications and marketing.

Table of Contents

Sales and Marketing.

We distribute our medical software through our direct sales force, our website and PACS partners (some of which partners also include our OrthoView solutions in their product offering to hospitals) and sell our medical devices through our agreements with collaboration partners such as Zimmer Biomet and Depuy Synthes. In specialty markets, we market and distribute our 3D printed medical devices and other clinical services through our experienced engineers who develop a close collaboration with key opinion leaders in each of these market segments.

All our activities in our Materialise Medical segment are coordinated and supervised from our headquarters in Belgium, which supervises product management and sales of our medical devices and software products.

Customers.

The customers for our Materialise Medical segment mainly include medical device companies, hospitals, universities, research institutes and industrial companies. For the year ended December 31, 2021, partner sales to medical companies collectively represented 53% and total software revenue represented 31% of our total Materialise Medical segment revenue. Our direct medical device sales represented 16% of our total Materialise Medical segment revenue. Most of our other clinical service sales to customers are executed on the basis of single transaction contracts or purchase orders.

Collaboration Partners.

We collaborate with leading medical device companies and academic institutions for the development and distribution of our surgical planning software, services, and products, such as Zimmer Biomet and DePuy Synthes, as well as DJO Surgical, Integra, Lima, Mathys, Medtronic, Abbott, Corin and the University of Michigan. Pursuant to these arrangements, we develop and license software and sell surgical planning, guides and implants, including for use in the fields of knee and shoulder replacement, CMF and thoracic procedures that our collaboration partners may then distribute under their own brands, together with their own implants, mainly in the United States, Europe, Japan and Australia. In addition, we grant licenses to collaboration partners to use, market and distribute such software or surgical guides and implants. Some of the licenses we have granted to our products and software provide for exclusive rights, including with respect to a particular field of medicine or to the software or product developed during the collaboration, and certain collaboration partners may have rights of first refusal with respect to related products or collaborations. The compensation structures under these arrangements vary and may include an upfront fee, royalties, milestone payments linked to certain targets, and fees for the service, maintenance and training we provide in connection with our software and products.

Competition.

In our Materialise Medical segment, we compete with a number of companies that provide image based software, 3D printed surgical models or medical devices, such as 3DSystems, Stratasys, Simpleware, Pie Medical, Within Lab as well as with medical device companies that develop and commercialize 3D printed medical devices and related software services.

Growth Opportunities.

The Materialise Medical segment is the market where we believe we can most directly realize our mission statement and contribute to a healthier world. We believe that personalized surgical approaches, because they offer the potential of higher predictability and accuracy, lead to improved patient outcomes, fewer complications and increased long-term survival rates. Personalization also drives operational efficiencies by replacing a broad range of instrumentation with tailored versions. This makes surgery more efficient, but also lowers the cost of operational steps like sterilization. Personalized surgical approaches have benefits not only in complex interventions and we believe that personalized solutions will therefore see an increased adoption in the future.

As a result, we are currently investing significantly in the development of new product offerings and the optimization of existing offerings in terms of cost and lead times, as well as in the expansion of our distribution channel in the

various sub-segments of

our Materialise Medical segment and in new territories.

As a result of the trend that we see in the medical community towards more patient-specific devices and treatments, as well as towards more advanced planning, a growing number of academic, clinical and commercial researchers are focusing on personalized medical treatments. Because these new products and treatments can only be brought to the market in compliance with very strict regulatory requirements, we believe there is an opportunity for safe and stable medical software tools, such as our Mimics Innovation Suite, that can pass significant regulatory scrutiny. We also believe that increasing regulatory requirements provide opportunities for our clinical services as we can leverage our significant medical sector experience and strong quality management systems.

A growing number of hospitals have adopted personalized solutions and built 3D printing facilities on site for

point-of-care

printing of these personalized solutions. We believe that there is a growing opportunity to provide our clinical services as well as our software solutions and experience in establishing operations to design personalized solutions in compliance with regulatory requirements.

We are investing significantly in the development of new solutions of

sub-markets

other than orthopedics and CMF, including planning tools for the cardiovascular markets in the shorter term and the pneumology markets in the longer term.

Table of Contents

Our Materialise Manufacturing Segment

In our Materialise Manufacturing segment, we primarily offer 3D printing services to industrial and commercial customers, the majority of which are located in Europe. In addition, we have identified, and provide 3D printing services to certain specialty growth markets in both the industrial and consumer marketplaces.

Many of the parts we print require functionality that cannot be delivered using other production processes. We believe that our industrial customers value the high quality, accuracy, complexity, durability, functionality and diversity in terms of size, scale and materials of the 3D printing services that we can offer. We deliver products to highly regulated industries, such as the aerospace, healthcare, machine manufacturing, quality control equipment and consumer goods industries, where our applications, technology and hardware capabilities enable us to adhere to high quality standards in a certified production environment.

As of December 31, 2021, our Materialise Manufacturing segment consisted of 752 FTEs and fully dedicated consultants, with 29.3% based at our headquarters in Belgium and in Materialise Motion and Rapid Fit. The remaining employees distributed throughout our local field offices in Austria, the Czech Republic, France, Germany, India, Italy, Poland, Spain, Ukraine, the United States and the United Kingdom.

Business Model.

We generate a majority of our revenue in our Materialise Manufacturing segment through the sale of parts that we print for our customers. We generate a smaller portion of our revenue by the sale of scanners (e.g. foot scan plates for Materialise Motion) and software solutions in our eyewear and footwear business.

For the years ended December 31, 2021, 2020 and 2019, our Materialise Manufacturing segment generated revenue of € 89.2 million, € 69.6 million and €94.2 million, respectively, representing 43.4%, 40.9% and 47.9% of our total revenue.

Business-to-Business

Services.

We offer the following services in our Materialise Manufacturing segment:

Additive Manufacturing Solutions

. We provide design and engineering services, rapid prototyping and additive manufacturing of production parts to customers serving the automotive, consumer goods industrial goods, semiconductor, art and architecture and aerospace markets. Our service centers offer a variety of 3D printing technologies including stereolithography, laser sintering, FDM (also known as Filament Fusion), PolyJet, Multi Jet Fusion, selective laser melting (or SLM) and vacuum casting. We have a dedicated production line for making aerospace-certified components using a number of technologies and materials.

Specialty Industrial Solutions

. We have developed additive manufacturing solutions that serve certain specialty industrial applications.

Our RapidFit+ business utilizes additive manufacturing to provide customers active in the automotive market with customized, highly precise and, in certain cases, patent protected measurement and fixturing tools. Using additive manufacturing technology, we believe that RapidFit+ fixtures provide more functionality and flexibility than the traditional fixtures that are currently widely used in the automotive industry. We also offer production tooling that we believe has substantially better ergonomics and improved functionality compared to traditional fixtures.

ACTech provides specialized solutions mainly for the automotive industry. In particular ACTech supplies prototyping of highly complex metal components through casting techniques that result in products that have a production grade performance. The casting is done using

state-of-the-art

3D printed sand molds, while the final functionality of the components is achieved by a fully integrated post processing of the components in our CNC workshop.

Wearables initiatives in consumer industry.

We have developed two wearables verticals for the consumer market. We believe 3D printing and design automation has great potential to help both consumers and healthcare professionals improve comfort, health and performance through personalized eyewear or footwear.

In our eyewear vertical, we offer a complete

end-to-end

solution for

3D-printed,

often custom, eyewear frames. Based on a scan, patented technology identifies the critical parameters to automatically design eyewear that is customized to a person’s face. The resulting file can be printed in our eyewear production line, and we provide the necessary finishing, assembly steps and packaging.

Through Materialise Motion, we offer a full suite of solutions for footcare professionals. We offer digital measurement tools and personalized solutions to footcare professionals treating foot or gait problems. By means of our foot scan plates, we can capture a dynamic scan of a person’s foot sole and combined with our software tools, we create custom insoles based on this scan. The insoles are 3D printed, finished and assembled in a dedicated production line. Our research and product development teams aim to build a growing suite of solutions for patients with different types of motion problems.

Sales and Marketing.

We market our services to our additive manufacturing solutions business customers using our sales force and through our website. Our more complex product offerings are addressed directly by our specialized sales teams who are located throughout Europe near our larger accounts and who align our customers’ needs with the wide range of 3D printing technologies or market-specific solutions that we offer. More straightforward products can be ordered directly by our customers through our “Materialise OnSite” or i.materialise web portals, a proprietary automated system that takes orders, provides quotes and manages the printing process from start to finish, and allows customers to track the manufacturing and shipment process of their product online. Within our larger sales teams, specialized sales managers focus either on rapid prototyping, which is our traditional and well-established market, or the additive manufacturing of

end-use

production parts, which is the market where we see opportunities for significant growth. Our marketing team in Belgium oversees our global marketing strategy. In addition, employees at our Belgian headquarters and in our local field offices manage sales for particular markets and accounts and provide back office and production management support to our customers.

Table of Contents

For our specialty markets and wearables initiatives we have separate sales teams that offer our customers the necessary expertise in their domain. Our sales teams have a direct approach to the market but in some cases we also work with partners or distributors locally to address specific market segments, such as the large segments of eyewear opticians or footcare professionals.

Customers.

The customers for our Materialise Manufacturing segment are from a wide variety of industries, including the automotive, aerospace, healthcare, semiconductor, industrial goods, art and design and consumer products industries. For these customers, we offer a complete set of services ranging from consultancy and

co-creation,

to design and engineering, rapid prototyping, and certified manufacturing of

end-use

parts.

Through our consultancy offering, which we brand as Materialise Mindware, we work together with customers to solve complex design challenges and to discuss how the introduction of 3D printing can affect product development, manufacturing workflow, business models and customer experiences. For example, a

co-creation

with HOYA, in collaboration with Hoet Design Studio, saw the launch of the world’s first vision-centric,

3D-tailored

eyewear solution, Yuniku. Yuniku enables individualized lens and frame design through a sophisticated

end-to-end

digital supply chain, which includes a custom 3D scanner and software platform,

co-created

by us and HOYA, directly linked to our eyewear manufacturing factory.

Through our design and engineering service, we also service those customers looking for support in their initial concept design or with maximizing a design for 3D printing. Our design and engineering team, which is comprised of highly specialized designers and CAD engineers, offers dedicated design and software support for additive manufacturing, including remodeling and file preparation, as well as 3D scanning and measuring. Our team also offers trainings to engineering professionals active in various markets to accelerate the adoption of design for additive manufacturing.

The customers of both our Materialise OnSite and i.materialise platforms order through our website. Materialise OnSite customers tend to be industrial customers looking to rapid prototype parts quickly and reliably, often taking advantage of fast-lane machines to ensure short lead times for time-critical projects. For i.materialise, while there is a potential to address the wide consumer market with this platform, we prefer to describe our current customers as “home professionals.” Our i.materialise client base includes independent designers and CAD hobbyists that often sell their creations or their services to others, including, in certain instances, through the i.materialise gallery. Through i.materialise’s APIs, companies can also partner with i.materialise to give their own customers a cloud-based,

3D-printing

solution on their website, streamlining the ordering, manufacturing and shipping processes through a direct link to our factory for 3D printing. Since 2016, Microsoft has been using the i.materialise API to offer a cloud-based 3D print solution for Windows 10 users, and PTC did the same for Creo 4.0 software users.

Most of our straightforward additive manufacturing and rapid prototyping solutions are executed on the basis of single transaction contracts or purchase orders with the customer. These contracts and purchase orders lay out the pricing, delivery and other terms of the order. For our Additive Manufacturing service of

end-use

parts, an entirely new approach to ensure parts are made according to agreed standards is required, for which we have set processes to onboard new customers. An example of this is our dedicated aerospace manufacturing line, backed by certifications EN9100 and EASA Part 21G, through which we are currently manufacturing plastic parts for, among others, Airbus’s A350 XWB. We expect that as demand for our Certified Additive Manufacturing service grows, more long-term agreements may be entered into.

For the automotive manufacturers and their suppliers that use our RapidFit+ service, the fixtures are custom engineered by dedicated teams. Our RapidFit+ customers, which include their quality departments, expect that fixtures meet high accuracy standards. Several automotive OEMs in Europe are currently considering our innovative solution as a potential new standard, while a solid base of automotive Tier 1 suppliers in Europe has embraced RapidFit+ as one of their fixture solutions.

Competition.

In our additive manufacturing solutions business, we compete with a number of companies that provide industrial 3D printing services, including Cresilas, Prototal, Protolabs and Quickparts. In addition, larger accounts tend to move their 3D printing production

in-house

once their orders have reached certain volumes, which not only creates opportunities for our Materialise Software segment but also for our Materialise Manufacturing segment in terms of capacity balancing services.

In the measurement and quality control fixture market addressed by RapidFit+, we are not aware of any direct competition coming from 3D printing companies. We do have competition, however, from a large group of smaller companies that are active in the more traditional tooling manufacturing.

While there are multiple

start-up

companies seeking to address the home 3D printing services market, we believe that Shapeways and Sculpteo are the most prominent direct competitors of i.materialise based on their global reach. i.materialise focuses on standing out as a brand in terms of service and reliability.

Growth Opportunities.

We believe that there is particular potential to grow our presence in the markets for additive manufacturing of complex and/or unique end products, including in particular certain parts for the aviation industry and eyewear and footwear products. In recent years, more companies have been using additive manufacturing for production across a broad range of industrial sectors, including aerospace, orthopedic implants, surgical guides, dental copings and hearing devices. For industrial

end-use

parts, we intend to continue to selectively invest in the expansion and creation of certified 3D manufacturing environments that meet the high standards of the specialized segments of the industrial production market that we focus on. In addition, we believe that our local sales teams, which are near our customers, as well as our engineering teams, which can bring in additional expertise where required, are important and rather unique assets in this market that are worthwhile to continue to invest in.

Table of Contents

Manufacture and Supply.

We produce our 3D printed products at our service centers in Belgium, Brazil, the Czech Republic, Germany, Poland, Japan and the United States. We print substantially all of products

in-house

using a variety of technologies, including stereolithography, laser sintering, FDM (also known as Filament Fusion), PolyJet, powder binding, Multi Jet Fusion, Powder Bed Fusion and vacuum casting, and only subcontract the manufacture of products if certain other technologies (such as CNC machined components) are required or for capacity balancing purposes. As of December 31, 2021, we operated a total of 201 3D printers and six vacuum casting machines at these service centers, which include distinct areas dedicated to the machinery, quality control, cleaning and labelling of our products. The table below provides selected information about our 3D printers and vacuum casting machines:


Technology	Size	Manufacturer	Number

Stereolithography	Small/Medium Size	3D Systems Corporation / Other	39
	Medium Size	Materialise / Stratasys	3
	Mammoth	Materialise (1)	15

DLP	Small Size	Asiga	8

PolyJet	Connex	Stratasys Ltd.	4

FDM	Small Size (2)	Stratasys Ltd.	2
	Medium Size (3)	Stratasys Ltd.	18
	Large Size (4)	Stratasys Ltd.	16

Laser Sintering	Small Size	EOS GmbH	12
	Medium Size	3D Systems Corporation/ EOS GmbH / Other	27
	Large Size	EOS GmbH / Ricoh / Sindoh	24

Multi Jet Fusion	Medium Size	HP	11

Powder Binding	Large Size	ExOne	3

Vacuum Casting	Small Size Medium Size Medium Size Large Size	MCP HEK GmbH MCP HEK GmbH SCHUHL MCP HEK GmbH	1 2 1 2

Direct Metal Laser Sintering	Medium Size	EoS GmbH / GE Additive / Renishaw / SLM Solutions	16
Direct Metal Laser Sintering	Large Size	SLM Solutions	3

(1)	We have proprietary stereolithography machines based on our patented curtain coat technologies. The original curtain coat machines had a medium sized build volume. These medium sized machines have subsequently been adapted to become the extra-large sized Mammoth machines.

(2)	Small size machines are machines with a build volume of less than 250×250×250 mm.

(3)	Medium size machines have a build volume of less than 500×500×500 mm.

(4)	Large size machines have a build volume of more than 500×500×500 mm.

As of December 31, 2021, 48 printers produced parts exclusively for our Materialise Medical segment, while the other 153 printers and six vacuum casting machines produced parts for our Materialise Manufacturing segment.

As of December 31, 2021, all of our 3D printers and vacuum casting machines were either owned or held under a lease contract. At the end of the lease agreements (which are typically for a period of five years), we have an option to purchase the machines for a value of approximately 1.0% of their original value. We are responsible for the maintenance of such leased equipment.

We devote significant time and attention to the quality control of our products during the printing process by maintaining a comprehensive quality control program, which, among other things, includes the control and documentation of all material specifications, operating procedures, equipment maintenance and quality control methods. In addition, we inspect all of our raw materials to be used in our products throughout the printing process. We control our production orders through the use of labels or visual references on our internal database,

bar-codes,

controlled prints and routers, which enables us to trace our products during the printing process. Upon completion of the production process, we package and label our products.

Table of Contents

The raw materials used in the printing of our products are mainly aluminum, titanium alloy and stainless steel powders, epoxy based photocurable resins, PA12 and thermoplastic polyurethane, or TPU, based powders and a suite of thermoplastic filaments like ABS, PC and Ultem and quartz sand and furanic resin binder.

With the exception of FDM and PolyJet -materials, we believe that none of our other raw material requirements is limited to any significant extent by critical supply or price volatility. We continuously look for second sourcing of our raw materials in order not to be dependent on a single supplier in case a supply issue was to occur. We monitor the costs of our raw materials in order to optimize the cost/performance whilst not jeopardizing the expectations of our customers and the safe use of the materials in critical applications. With our strategic partnership with BASF 3D Printing Solutions GmbH, we are working towards offering to the market open solutions in terms of materials and software through which the user of additive manufacturing equipment can choose functionalities that best suit the user.

Our 3D printing operations for our patient-specific surgical guides, models and implants are subject to extensive regulation. We operate a certified quality management system in line with the U.S. Quality System Regulation, good manufacturing practice regulations and ISO 13485. We are registered with regulatory authorities in the United States, Europe, Canada, Australia and other jurisdictions. We CE mark our products where required. Our service centers are subject to periodic and sometimes unannounced inspections by regulatory authorities, including inspections by the FDA.

Research and Development

We have an ongoing research and development program to improve and expand the capabilities of our existing technology portfolio, which reflects our continued investments in a range of disciplines, including software development, industrial, mechanical and biomedical engineering, physics and chemistry.

We have a long history of research and development through collaborations, which augment our internal development efforts. As of December 2021, we were active in over 20 government funded research projects and we also employed multiple researchers with a publicly funded scholarship. With our platform technologies and strong track record in successful commercialization of scientific innovations, we receive many requests for participation in new development projects. While we strongly protect our intellectual property in our core competencies, many of our products require collaborations in order to create healthy ecosystems for their successful implementation.

As of December 31, 2021, we had approximately 70 active research and development projects in various stages of completion and approximately 444 FTEs and fully dedicated consultants working on research and development in our facilities in Belgium, France, Germany, the United Kingdom, the United States, Ukraine, China and Malaysia.

Our research and development projects include (but are not limited to) the following:

various software development projects including projects related to engineering and design for 3D printing, and improving existing technological challenges (for example, the handling of large amounts of data and advanced image segmentation), which are expected to benefit both our Materialise Software and Materialise Medical segments;

research projects to understand and develop cutting-edge software tools for industrially relevant additive manufacturing technologies (powder bed fusion for plastics (laser sintering) and metal (laser melting and electron beam), stereolithography, FDM (also known as Filament Fusion), binder jetting power bed fusion,

DLP-based

printing and inkjet based technologies);

research projects in our Materialise Medical segment to develop patient specific surgical planning tools or surgical guides or implants for orthopedic, CMF and cardiovascular surgeries;

research projects on the use of virtual and augmented reality by our Materialise Medical segment;

research and development projects on smart digital technologies for the large-scale personalization of wearables;

various research projects on the use of artificial intelligence and (deep) machine learning in the fields of image processing and additive manufacturing; and

several research projects related to improving the maturity, reliability and quality of the additive manufacturing process, which are expected to benefit each of our three segments.

In addition, our strategic partnership with BASF New Business GmbH focuses on collaboration for research and development activities in multiple areas, primarily focusing on the introduction of new plastic materials in additive processes.

We also regularly apply for research and development grants and subsidies under European, Belgian, British, French and German, grant rules. The majority of these grants and subsidies are

non-refundable.

We have received grants and subsidies from different authorities, including the Flemish government (VLAIO, or Vlaams Agentschap Innoveren en Ondernemen), the European Union (FP7 and H2020 framework programs) and BMBF, the German Federal Ministry of Education and Research.

Table of Contents

We expect to continue to invest significantly in research and development in the future.

Intellectual Property

We regard our intellectual property rights as valuable to our business and protect our technology portfolio through a combination of patent, copyright, trademark, trade secret and other intellectual property laws, confidentiality and other contractual provisions and other measures. The nature and extent of legal protection associated with each such intellectual property right depends on, among other things, the type of intellectual property right and the given jurisdiction in which such right arises.

As of December 31, 2021, our portfolio of intellectual property featured 385 issued patents and an additional 143 pending patent applications primarily in the United States, the European Union and Japan. Of these, our issued patents expire between approximately 2020 and 2035, while our currently pending patent applications will generally remain in effect for 20 years from the date of the initial applications. We believe that, while our patents provide us with a competitive advantage, our success depends primarily on our business development, applications

know-how

and ongoing research and development efforts. Accordingly, we believe that the expiration of any single patent, or the failure of any single patent application to result in an issued patent, would not be material to our business or financial position.

As is the case in the 3D printing industry generally, the development of our products, processes and materials has required considerable experience, manufacturing and processing

know-how

and research and development activities. We protect our proprietary products, processes and materials as trade secrets through nondisclosure and confidentiality agreements with our employees, consultants and customers.

In addition, we own the trademark registrations for “Materialise” and “ACTech” and trademark registrations and pending applications for many of our services and software solutions in those territories where we have substantial sales, including “Streamics”,

“Mimics”, “3-matic”, “Inspector”,

“Magics”, “RapidFit+”, “MGX by Materialise”, “Heartprint”, “ADaM”, “Engineering on Anatomy”, “Surgicase”, “Enlight”, “Mindware” and “Phits”, among others.

We are party to various licenses and other arrangements that allow us to practice and improve our technology under a broad range of patents, patent applications and other intellectual property, including agreements with our collaboration partners, Zimmer Biomet, DJO Surgical, DePuy Synthes, Lima, Mathys, Stryker, Corin, Siemens, FluidDa, HOYA, the University of Michigan and PTC.

There can be no assurance that the steps we take to protect our proprietary rights will be adequate or that third parties will not infringe or misappropriate such rights. We have been subject to claims and expect to be subject to legal proceedings and claims from time to time in the ordinary course of our business. In particular, we may face claims from third parties that we have infringed their patents, trademarks or other intellectual property rights. Such claims, even if not meritorious, could result in the expenditure of significant financial and managerial resources. Any unauthorized disclosure or use of our intellectual property could make it more expensive to do business and harm our operating results.

Seasonality

End markets such as healthcare, automotive, aerospace and consumer products may experience some seasonality.. Historically, the revenue of our Materialise Software segment has been greater in the fourth quarter, as compared to the revenue of each of the other quarters. A number of our customers make their initial software purchase in the fourth quarter prior to the end of their annual budget cycle and tend to renew, extend or broaden the scope of their licenses on the anniversary date of their first purchase. In addition, we have in the past often brought new releases on the market in the third quarter of the calendar year, which may also have an impact on sales in the subsequent quarter.

Regulatory / Environmental Matters

Environmental Matters

Our facilities and operations are subject to extensive U.S. federal, state and local, European and other applicable foreign environmental and occupational health and safety laws and regulations. These laws and regulations govern, among other things, air emissions; wastewater discharges; the generation, storage, handling, use and transportation of hazardous materials; the handling and disposal of hazardous wastes; the

clean-up

of contamination; and the health and safety of our employees. Under such laws and regulations, we are required to obtain permits from governmental authorities for some of our operations. If we violate or fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. We could also be held responsible for costs and damages arising from any contamination at our past or present facilities or at third party waste disposal sites.

Our headquarters in Belgium, our manufacturing site in Poland, and ACTech’s headquarters in Germany, follow the ISO 14001:2015 criteria for an effective environmental management system. These sites are ISO 14001:2015 certified.

Compliance with laws and regulations relating to the discharge of materials into the environment or otherwise relating to the protection of the environment has not had a material impact on capital expenditures, earnings or the competitive position of our subsidiaries and us. We are not the subject of any legal or administrative proceedings relating to the environmental laws of Belgium or any country in which we have facilities. We have not received any notices of any violations of any such environmental laws.

Table of Contents

Healthcare Regulatory Matters

In our Materialise Medical segment, we are subject to extensive and complex U.S. federal, state and local, European and other applicable foreign healthcare and medical devices laws and regulations.

Both before and after approval or clearance our medical products and product candidates are subject to extensive regulation. In the United States, the FDA under the Federal Food, Drug and Cosmetic Act primarily regulates us. In Europe and in other foreign jurisdictions in which we sell our medical products, many of the regulations applicable to our medical devices and products in these countries are similar to those of the FDA. Together, these regulations govern, among other things and where applicable, the following activities in which we are involved:

•

product development;

•

product testing;

•

product clinical trial compliance;

•

product manufacturing;

•

product labelling and instructions for use;

•

product safety, product safety reporting, recalls and field corrective actions;

•

product packaging and storage;

•

product registration, market clearance or approval;

•

product modifications;

•

product marketing, advertising and promotion;

•

product import and export, restrictions, tariff regulations, duties and tax requirements;

•

product sales and distribution;

•

post-market surveillance, including reporting of deaths or serious deterioration in the state of health and malfunctions that, if they were to recur, could lead to death or serious deterioration in the state of health;

•

record keeping procedures;

•

registration for reimbursement; and

•

necessity of testing performed in country by distributors for licenses.

Failure to comply with the Federal Food, Drug and Cosmetic Act could result in, among other things, warning letters, civil penalties, delays in approving or refusal to approve a medical device candidate, product recall, product seizure, interruption of production, operating restrictions, suspension or withdrawal of product approval, injunctions or criminal prosecution. Outside the United States, failure to comply with applicable laws and regulations could result in similar actions, and in the suspension or withdrawal of Quality Management System certification which may be a prerequisite to market medical devices.

The time required to obtain clearance required by foreign countries may be longer or shorter than that required for FDA clearance, and requirements for licensing a product in a foreign country may differ significantly from FDA requirements.

Moreover, these laws and regulations are subject to change. For example, on May 26, 2021, the Medical Devices Regulation will become fully applicable in the European Union, which is requiring us to adopt certain measures in anticipation of its effectiveness. For more information, see “Item 3. Key Information—D. Risk Factors—Risks Related to Our Materialise Medical Segment and Regulatory Environment—Healthcare policy changes, including legislation to reform the U.S. healthcare system, could adversely affect us.”

We have obtained MDSAP certification. This program allows an MDSAP-recognized auditing organization to conduct a single regulatory audit of a medical device manufacturer that satisfies the relevant requirements of the regulatory authorities participating in the program. To the extent that we do business in the participating jurisdictions, certain major

non-conformities

identified under this program may be escalated to

Table of Contents

the regulatory authorities of the United States, Canada, Japan, Australia and Brazil. The Canadian regulatory authority, Health Canada, has made participation in MDSAP a mandatory requirement for medical device manufacturers importing products to Canada. Failure to maintain certification under MDSAP may impact our capability to do business in Canada. In addition, failure to address escalated issues reported to the participating authorities may impact our capability to do business in the respective jurisdictions.

C. Organizational Structure

The following illustrates our corporate structure as of the date of this annual report:

Table of Contents

D. Property, Plants and Equipment

Our corporate headquarters and our largest 3D printing service center are located in Leuven, Belgium. We currently own office and service spaces in Belgium as well as in the Czech Republic, France, Germany, Poland and the United States. We also lease other service centers and sales offices, which are located in Austria, Belgium, Brazil, China, France, Germany, India, Japan, Malaysia, Ukraine, the United Kingdom, the United States, Poland, Colombia, Australia, Italy and South Korea. The aggregate annual lease payments for our facilities in 2021, 2020 and 2019 were €2.1 million, €1.8 million and €2.1 million, respectively. The table below provides selected information regarding our facilities.


Location	Ownership	Use	Approximate Area	Lease Expiration
Leuven, Belgium	Owned	Corporate headquarters; production	50,614.35 sq. m.	N/A
Leuven, Belgium	Leased	Warehouse	165 sq. m.	March 31, 2022
Gentbrugge, Belgium	Leased	Office	39 sq. m.	No fixed end date
Beringen, Belgium	Leased	Office; production	2,848.25 sq. m.	October 31, 2030
Plymouth, Michigan, United States	Owned	Office; production; parking	3.89 acres	N/A
Ann Arbor, Michigan, United States	Leased	Office; production	2,771 sq. ft.	October 31, 2023
Saint Marcel les Valence, France	Owned	Office	1,100 sq. m.	N/A
Yokohama, Japan	Leased	Office	515.58 sq. m.	March 31, 2022
Kawasaki, Japan	Leased	Production	205 sq. m.	May 19, 2024
Ústí nad Labem, Czech Republic	Owned	Office; production	16,013 sq. m.	N/A
Vienna, Austria	Leased	Office	44 sq. m.	December 31, 2021 (renewal negotiations ongoing)
Gilching, Germany	Leased	Office	399 sq. m.	December 31, 2024
Bremen, Germany	Owned	Office	6,724 sq. m.	N/A
Petaling Jaya, Malaysia	Leased	Office	13,935 sq. ft.	May 31, 2024
Paris, France	Leased	Office	564.40 sq. m.	May 31, 2028
Kyiv, Ukraine	Leased	Office	3,384.8 sq. m.	June 29, 2028
Kyiv, Ukraine	Leased	Office	171 sq. m.	December 31, 2021 (renewal negotiations ongoing)
Sheffield, United Kingdom	Leased	Office	1,575 sq. ft.	No fixed end date
Southampton, United Kingdom	Leased	Office	3,340 sq. ft.	April 22, 2023
Shanghai, China	Leased	Office	1,200 sq. m.	June 8, 2022
Medellin, Colombia	Leased Leased Leased	Office Office Office	248 sq. m. 64 sq. m. 190 sq. m.	May 31, 2022 January 31, 2023 December 1, 2023
Wroclaw, Poland	Owned	Office; production	2.3975 hectare	N/A
Gold Coast, Australia	Leased	Office	N/A	January 22, 2024
Milan, Italy	Leased	Office	55 sq. m.	December 31, 2023

Table of Contents


Freiberg, Germany	Owned	Office, Production, Parking (Land)	26,277 sq. ft.	N/A
Freiberg, Germany	Owned	Office, warehouse, production, parking (Land)	7,996 sq. m.	N/A
Ann Arbor, Michigan, United States	Leased	Office	1,987 sq. ft.	December 31, 2023
Bangalore, India	Leased	Office	2,000 sq. ft.	March 31, 2022
Rio Claro, Brazil	Leased	Corporate Offices, R&D Laboratory, Production	4,092.27 sq. m.	August 5, 2029
Seoul, South Korea	Leased	Shared workspace	N/A	July 31, 2022
Tianjin, China	Leased	Office	183 sq. m.	October 31, 2022

See also “—B. Business Overview—Manufacture and Supply” for information about the printers we operate, “—Regulatory / Environmental Matters—Environmental Matters” for information about environmental matters and “Item 5. Operating and Financial Review and Prospects—B. Liquidity and Capital Resources—Indebtedness” for information about indebtedness secured by mortgages.

Table of Contents

ITEM 4A.

UNRESOLVED STAFF COMMENTS

Not applicable.

Table of Contents

ITEM 5.

OPERATING AND FINANCIAL REVIEW AND PROSPECTS

The following discussion and analysis should be read in conjunction with the information set forth in “Item 3. Key Information—A. Selected Financial Data,” and our consolidated financial statements and accompanying notes included elsewhere herein.

This section contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those contained in forward-looking statements. Factors that could cause or contribute to such differences include, without limitation, those discussed in the sections entitled “Item 3. Key Information—D. Risk Factors,” “Special Note Regarding Forward-Looking Information” and “Item 4. Information on the Company—B. Business Overview” and elsewhere in this annual report.

A. Operating Results

Overview

Company Overview

We are a leading provider of additive manufacturing and medical software and of sophisticated 3D printing services. With our knowledge, products and services, we empower our customers to use additive manufacturing technology more effectively, in general, and we enable certain specific and significant applications of additive manufacturing, in particular. In both instances, we seek to empower the choice for sustainability through the use of additive manufacturing.

As of December 31, 2021, our team consisted of 2,332 FTEs, and fully dedicated consultants. Our portfolio of intellectual property featured 385 issued patents and 143 pending patent applications as of December 31, 2021. For the year ended December 31, 2021, we generated € 205.5 million of revenue, representing 21% decrease over the prior year, a net profit of € 13.1 million and Adjusted EBITDA of € 32.5 million. For a description of Adjusted EBITDA and a reconciliation of our net profit to our Adjusted EBITDA, see “—Other Financial Information” below.

Public Offering

On July 6, 2021, we closed a

follow-on

public offering of a total of 4,600,000 ADSs at a public offering price of $24.00 per ADS for gross proceeds of $ 110.4 million.

We raised approximately $ 105.0 million (or € 92.7 million, based on the exchange rate as of December 31, 2021) in aggregate net proceeds from such

follow-on

offering.

Acquisition of Majority Interest in Engimplan

On August 6, 2019, we acquired 40% of the shares and voting interest of Engimplan and subsequently increased our shareholding in Engimplan to 75% with a capital increase in Engimplan. In December 2020, we acquired the remaining 25% interest in Engimplan, making us Engimplan’s sole shareholder (through our Brazilian subsidiary).

Acquisition of Remainder of Shares in Materialise Motion and Acquisition of Substantially All of the Assets of RS Scan

On November 9, 2020, we acquired the remaining 50% of the shares and voting interests in Materialise Motion (formerly known as RS Print), making us Materialies Motion’s sole shareholder. In addition, we acquired substantially all of the assets of RS Scan.

Materialise Motion is a custom footwear technology company, using scientific movement analysis to produce 3D printed footwear solutions. Materialise Motion operates within our Materialise Manufacturing segment.

Link3D Acquisition

Growth Strategy

In general, our strategy is built on the development and sale of two different sets of product portfolios: our horizontal and our vertical solutions.

•

Each of our segments has what we call a horizontal product offering that addresses a broad set of needs of customers that make use of additive manufacturing: our market leading Magics Software Platform in our Materialise Software segment, the Mimics

Table of Contents

Innovation Suite in our Materialise Medical segment and the additive manufacturing services that we offer through our Materialise Manufacturing segment. We believe that each of these horizontal platforms has the potential of continuing to grow as the adoption of additive manufacturing by our customers in each of our segments grows.

•

Second, leveraging on the technological and market knowledge that we gain as we bring our horizontal offerings to the market, we have built a select number of what we call vertical applications of 3D printing. These vertical applications, which address the specific needs of a particular subset of customers in a much more specific manner, include our surgical knee guides and personalized CMF guides and implants in our Materialise Medical segment and our measurement fixtures and personalized foot and eyewear products in our Materialise Manufacturing segment. We believe that this more focused presence in a few applications of 3D printing has the potential to significantly boost our growth.

Within the horizontal and vertical frameworks, each of our segments develops its own shorter term strategy.In our Materialise Software segment, we intend to accelerate the market penetration of our software platform (i) by expanding our product portfolio with innovative solutions that focus on volume production, including manufacturing execution systems, or MES, automated workflows for additive manufacturing and solutions such as Process Tuner assisting production companies in creating optimized processes (and as such expediting the new product introduction stage within production companies) and (ii) by offering our customers cloud-based access to our integrated software platform. We believe that the integration of Link3D can be instrumental to support and accelerate that initiative. Our development of a cloud-based software platform may affect our revenue levels in the near term, but we believe it will ensure the continued strength of our business model going forward. Further, in order to be able to meet the demands that are associated with volume production, including mass customization, and to accelerate the development and roll out of our cloud-based software platform, where software as a service (SaaS), big data technologies, and machine learning will be key drivers, we intend to continue to invest significantly in both research and development.In our Materialise Medical segment, we believe that the growing trend of personalized patient care will boost the demand for digital planning tools as well as for personalized medical devices. In response to that trend, we intend to continue to increase the penetration of our existing software products in the hospital market and to expand our portfolio of planning tools into new areas such as cardiovascular and pulmonology. We also intend to continue to develop and grow the sales of our personalized medical device portfolio, both directly and indirectly and in existing as well as in new markets, including in particular in the CMF market.

In our Materialise Manufacturing segment, we believe that there is significant growth potential in the markets for additive manufacturing of

end-use

products. We therefore intend to continue to invest in the expansion and creation of certified 3D manufacturing environments that meet the high standards of the specialized segments of the industrial market, including the aerospace market. More particularly, we believe that our growth initiatives in the wearables market that have been incubated within Materialise Manufacturing may drive growth in the coming years. In the eyewear market, we are investing in

back-end

production facilities for the production of 3D printed eyewear, including customized frames and also invest in in the introduction of advanced

front-end

digital technologies, such as virtual

try-on

and fitting solutions (including in collaboration with Hoya and Acuitis), In the footwear market, we will continue to invest in the development and commercial roll out of the pressure plate technology and related applications that we acquired from RS Scan and in the worldwide commercialization of our Phits customized 3D printed insoles, in collaboration with our former joint venture partner, Superfeet.

Importantly, our applications and solutions focus on empowering our customers’ and partners’ choice for sustainability. In the applications that we support, additive manufacturing has the potential to not only replace traditional manufacturing technologies, but also enable the digitization of customer journeys and supply chains, to localize manufacturing, to reduce inventories and the use of raw materials and to make end customers’ solutions more durable through personalization. We believe that this focus on the choice for sustainability will position us for long term sustainable growth, even if this may imply that we forego short term growth opportunities that do not fit this vision.

Our growth strategies for both our existing and new businesses and for each of our three market segments are based on our medium and long term expectations for these businesses and segments. In the short term, we expect both the 3D printing industry in general and our business will continue to be impacted by the ongoing COVID-19 pandemic. For more information, see “—Trend Information” below.

Recent Developments

See Note 27 to our audited consolidated financial statements for disclosure of significant transactions and significant changes in our financial condition or results of operations that occurred subsequent to December 31, 2021. In addition, see “—Trend Information” below.

Key Income Statement Items

Revenue

Revenue is generated primarily by the sale of our software and 3D printed and complex manufactured products and services.

In our Materialise Software segment, we generate revenues from software licenses, maintenance contracts and custom software development services and sales of Materialise Controller.

In our Materialise Medical segment, we generate revenue through the sale of medical devices that we print or manufacture for our customers and from the sale of licenses on our medical software packages, software maintenance contracts and custom software development and engineering services.

Table of Contents

In our Materialise Manufacturing segment, we generate most of our revenue through the sale of parts that we print or produce for our customers.

Software.

Software revenue is comprised of perpetual and time-based licenses, maintenance revenue and software development service fees. Our software products are mainly licensed pursuant to one of two payment structures: (i) perpetual licenses, for which the customer pays an initial fee for a perpetual license and subsequently pays fees for maintenance under separate maintenance contracts, generally on an annual basis, or (ii) time-based licenses (generally annual licenses), for which the customer pays equal periodic fees to keep the license active. Perpetual licenses require the payment of fees for maintenance, technical support and product updates. Time-based licenses entitle the customer to corrective maintenance and product updates without additional charge. We generally recognize revenue from our time-based licenses and our maintenance revenue on a straight-line basis over the term of the applicable license or maintenance contracts. Our software revenue depends upon both incremental sales of software licenses to both new and existing customers and renewals of existing time-based licenses and maintenance contracts. Sales and renewals are also driven by our customers’ usage and budget cycle. Software development services are typically charged either on a time and materials basis or on a fixed fee basis.

3D printed products and services.

3D printed products revenue is derived from our network of 3D printing service centers. Our service centers not only utilize our 3D printing technology to print products but are also full-service operations that provide support and services such as

pre-production

collaboration prior to printing the product. Revenue from 3D printed products depends upon the volume of products that we print for our customers. Sales of these products are linked to the number of our 3D printing machines that are installed and active worldwide. We have dedicated teams and production lines for industrial applications and medical applications. All medical products require a highly regulated production environment. Whereas both segments use the same 3D printing technologies, the complex combination of our engineering and software solutions in connection with medical applications results in higher margins for our medical applications.

Production of limited runs of highly complex casted metal parts

. Casted products revenue is derived from ACTech’s network, with its production unit in Freiberg, Germany. ACTech is utilizing casting technology, including 3D printing technology for mold making, and offers full-service project operations, including project and

pre-production

collaboration, and

high-end

complex finishing services.

Cost of Sales

Our cost of sales includes raw materials, external subcontracting services, labor costs, manufacturing overhead expenses, amortization and depreciation and reserves for inventory obsolescence. Our manufacturing overhead expenses include quality assurance, manufacturing engineering, material procurement, inventory control, facilities, equipment and information technology and operations supervision and management.

Research and Development Expenses

Our research and development activities primarily consist of engineering and research programs associated with our products under development as well as research and development activities associated with our core technologies and processes. Research and development expenses are primarily related to employee compensation, including salary, fringe benefits, share-based compensation and temporary employee expenses. We also incur expenses for software and materials, supplies, costs for facilities and equipment, depreciation, and outside design and outside research support.

Development expenditures on an individual project are recognized as an intangible asset when we can demonstrate:

•

the technical feasibility of completing the intangible asset so that the asset will be available for use or sale;

•

the intention to complete and the ability to use or sell the asset;

•

how the asset will generate future economic benefits;

•

the availability of resources to complete the asset; and

•

the ability to measure reliably the expenditure during development.

We have determined that the conditions for recognizing internally generated intangible assets from proprietary software, guides and other product development activities are not met until shortly before the products are available for sale, unless either (i) we have strong evidence that the above criteria are met and a detailed business plan is available showing the asset will on a reasonable basis generate future economic benefits or (ii) the development is done based upon specific request of the customer, we have the intention to market the product to parties other than the customer, the development is subject to an agreement and the substance of the agreement is that the customer reimburses us for a significant portion of the development expenses incurred. As such, development expenditures not satisfying the above criteria and expenditures on the research phase of internal projects are recognized in the consolidated income statement as incurred.

Sales and Marketing Expenses

Our sales and marketing expenses primarily consist of employee compensation, including salary, fringe benefits and share-based compensation for our marketing, sales and business development functions. Other significant expenses include travel, depreciation, product demonstration samples, brochures, websites and trade show expenses.

General and Administrative Expenses

Our general and administrative expenses primarily consist of employee compensation, including salary, fringe benefits and share-based compensation for our executive, financial, human resources, information technology support and regulatory affairs and administrative functions. Other significant expenses include outside legal counsel, independent auditors and other outside consultants, insurance, facilities, depreciation and information technologies expenses.

Table of Contents

Net Other Operating Income

Net other operating income consists primarily of withholding tax exemptions for qualifying researchers, development and government grants, partial funding of research and development projects, currency exchange results on purchase and sales transactions the amortization of intangible assets from business combinations,

write-off

of trade receivables, impairment of goodwill and intangible assets, and revaluation income or costs from participations.

Government grants are recognized when there is reasonable assurance that the grant will be received and all attached conditions will be complied with. When the grant relates to development costs or another expense, it is recognized as income over the grant period necessary to match the income on a systematic basis to the costs that it is intended to compensate. When the grant relates to the construction of buildings, it is recognized as income over the depreciation period of the related building.

Such grants have been received from the federal and regional governments and from the European Union in the forms of grants linked to certain of its research and development programs, reduced payroll taxes and the financing of the construction of an office building in Leuven, Belgium and in Freiberg, Germany.

Where retention of a government grant is related to assets or to income and dependent on the Company satisfying certain criteria, it is initially recognized as deferred income. When the criteria for retention have been satisfied, the deferred income balance is released to other operating income in the consolidated income statement on a systematic basis over the periods in which the entity recognizes as expenses the related costs for which the grants are intended to compensate.

Government grants are recognized when there is reasonable assurance that the grant will be received and all attached conditions will be complied with.

Financial Expenses

Our financial expenses primarily include costs associated with currency exchange differences and with interest payments on our debt.

Critical Accounting Policies and Accounting Estimates

The preparation of our consolidated financial statements requires management to make judgments, estimates and assumptions that affect the reported amounts of revenue, expenses, assets and liabilities, and the accompanying disclosures. Uncertainty about these assumptions and estimates could result in outcomes that require a material adjustment to the carrying amount of assets or liabilities for future periods.

On an ongoing basis, we evaluate our estimates, assumptions and judgments, including those related to revenue recognition, development expenses, share-based payment transactions, income taxes, impairment of goodwill, intangible assets and property, plant & equipment and business combinations.

We based our assumptions and estimates on parameters available when the consolidated financial statements were prepared. Existing circumstances and assumptions about future developments, however, may change due to market changes or circumstances arising beyond our control. Such changes are reflected in the assumptions when they occur.

Revenue Recognition

Our revenue recognition policies require management to make significant estimates. Management analyzes various factors, including a review of specific transactions, historical experience, creditworthiness of customers and current market and economic conditions. Changes in judgments based upon these factors could impact the timing and amount of revenue and cost recognized and thus affects our results of operations and financial condition. The significant estimates and judgments relate to:

•

Assessing whether a performance obligation is distinct in a bundled sale(s) transaction;

•

Estimation of the variable considerations and the assessment of the revenue constraint limitation;

•

Estimation of the stand-alone selling prices for each distinct performance obligation; and

•

The stage of completion of our custom development of software components for customers when revenues are satisfied over time.

We make significant judgments when performing the assessment of whether a performance obligation is distinct from the other performance obligations in a contract, i.e., whether the good or service has a benefit to the customer on its own or together with readily available resources and/or

Table of Contents

whether the good or service is highly interrelated or constitutes a significant input with another good or service provided, or whether it significantly modifies or tailors another good or service. Relevant judgments include the following:

•

Whether the software license is distinct from the 3D printed guides – in most cases with contracts with collaborative partners in the Materialise Medical segment, the software license is combined with the manufacturing of the 3D printed guides as the software license has no benefit to the customer without the manufacturing services. We have also implemented a new “Plan Only” feature where the collaboration partners can benefit from a virtual plan produced with the software license without the manufacturing of any physical product. Such Plan Only features are recognized in revenue as a separate performance obligation based on the usage by the collaboration partner.

•

Whether the development services are distinct from other performance obligations – in most cases, these performance obligations are distinct however for one contract with a collaboration partner in the Materialise Medical segment, the software license is combined with the license and the 3D printed guides as one “distinct” performance obligation

For the stand-alone selling prices, we use prices from price list or historical prices for similar transactions. However, in certain cases, such information is not readily available, and in those cases, we estimate the stand-alone selling price based on a cost-plus

mark-up

or other estimate. If the stand-alone selling price of one or more goods or services in arrangements with multiple performance obligations is highly variable or uncertain, we estimate the stand-alone selling price with reference to the total transaction price less the sum of the observable stand-alone selling prices of other goods or services promised in the contract. In addition, for certain performance obligations such as development services, the stand-alone selling prices also require an estimate of the time required to complete the development.

Certain contracts include estimates of variable considerations within the transaction price and assessing the revenue constraint, such as:

•

Quantities/volume sold at fixed prices related to, but not limited to, the manufacturing of 3D printed products, software licenses sold and maintenance renewals;

•

Contractual prices may vary based on volume purchased during a given period;

•

FTE expenses for development or other services billed on a time & material basis; and

•

Volume discounts.

The method used to estimate the variable consideration depends on the number of possible scenarios and the probability of each scenario. If there are many possible scenarios with a high probability probabilities (each less than 50%), we will use the expected value method, while the most likely method is used when there is a scenario with a higher probability (more than 50%).

Variable consideration is not a constraint when, based on historical experience, a high reliable business forecast and/or the timeframe of the estimates, we determine that there is a high probability that it will not result in a future reversal of revenue.

We determine the stage of completion for development contracts satisfied over time by comparing the labor hours incurred to date with the estimated total labor hours required to complete the project. We consider labor hours to be the most reliable, available measure of progress on these projects. Adjustments to estimates to complete are made in the periods when facts that give rise to a change become known. When the estimate indicates that a loss will be incurred, the loss is recorded in the relevant period. Significant judgments and estimates are involved in determining the percentage completion for each contract. Different assumptions can produce materially different results.

Development Expenses

Under International Accounting Standards 38, or IAS 38, internally generated intangible assets from the development phase are recognized if certain conditions are met. These conditions include the technical feasibility, the intention to complete, the ability to use or sell the asset under development, the availability of technical, financial and other resources to complete the asset, and the demonstration of how the asset will generate probable future economic benefits. The cost of a recognized internally generated intangible asset comprises all directly attributable cost necessary to make the asset capable of being used as intended by management. In contrast, all expenditures arising from the research phase are expensed as incurred.

Determining whether internally generated intangible assets from development are to be recognized as intangible assets requires significant judgment, particularly in determining whether the activities are considered research activities or development activities, whether the product enhancement is substantial, whether the completion of the asset is technically feasible considering a company-specific approach and the likelihood of future economic benefits from the sale or use.

We have determined that the conditions for recognizing internally generated intangible assets from proprietary software, guide and other product development activities are not met until shortly before the products are available for sale, unless either (i) we have strong evidence that the above criteria are met and a detailed business plan is available showing that the asset will generate future economic benefits on a reasonable basis or (ii) the development is done based upon specific request of the customer, we have the intention to market the product also to other parties than the customer, the development is subject to an agreement and the substance of the agreement is that the customer reimburses us for a significant portion of the development expenses incurred. As such, development expenditures not satisfying the above criteria and expenditures on the research phase of internal projects are recognized in the consolidated income statement as incurred. This assessment is monitored on a regular basis.

Table of Contents

We have determined that the criteria for internally generated intangible assets were met for two projects in 2018: (1) the software development of a new planner for hospitals within the cardiovascular field and (2) the process to obtain FDA and E.U. approval for a 3D printed tracheal splint within the Materialise Medical segment. The first project was successfully completed in 2019. In 2021, we recognized an impairment of € 0.2 million as the business case no longer showed a positive result over the next 5 years. The main reason was a delay in revenue due to the

COVID-19

pandemic. From 2017 through September 2020, the total amount capitalized for the U.S. market component of the tracheal splint development project had accumulated to €2.1 million, based on a positive assessment of all recognition criteria. In September 2020, the FDA disapproved the Investigational Device Exemption, or IDE, submission, and in December 2020, the FDA disapproved an amended IDE submission. Our management believes that the technical feasibility of the project (the IDE approval, successful outcome of the clinical trial and obtaining the FDA’s premarket approval, or PMA) remains positive. However, the FDA regulatory process has resulted in a delay of two years compared to our previous assumptions regarding obtaining the PMA and commencing commercialization. As a result, the headroom (defined as the difference between the development expenses capitalized and to be incurred until the PMA is obtained, and the present value of the expected cash flows until 2030 (the year after which the patent would expire)) has become negative. Accordingly, in 2020 we have concluded that a full impairment of the capitalized expenditures is appropriate for the total amount of €2.1 million. We continued this R&D program during 2021, and aim to obtain the IDE approval from the FDA during the second half of 2022. Because the present value of the expected cash flows until 2030 remains negative we continue to report the R&D expenses related to this program in our income statement.

In the year ended December 31, 2020 we have determined that the criteria for internally generated intangible assets were met for certain subprojects related to our internal digital transformation program. With this program, we are investing in our IT landscape and upgrading and/or standardizing part of our digital core business. We have invested, and will continue to invest in this program in 2022 and 2023 in state of the art technology that is available on the market to upgrade our CRM, ERP and license management software. Together with this implementation, we will also upgrade and further develop those internal software programs that are closely related to 3D printing and the specific needs that arise from 3D printing. The integration of both standard and internal systems in the digital chain of Materialise is crucial and requires deep analysis, development and technical validation. We expect that it will not only streamline our processes internally and help us reduce costs in maintenance in the short term, but it also will allow us to learn from this and commercialize this knowledge by making our software even easier to integrate with standard systems. This competitive advantage should become important in the coming years where 3D printing will be more and more integrated on the traditional manufacturing floor. As of December 31, 2020 we had capitalized K€2,185 in respect of these projects. As of December 31, 2021 we carried in total K€3,871 as assets under construction in respect of these projects.

In the year ended December 31, 2021 we have determined that the criteria for internally generated intangible assets were met for our project on the transformation of the platform architecture to enable our software products to make the transition from desktop to (hybrid) cloud. As of December 31, 2021 we had capitalized K€975 in respect of this project.

Share-Based Payment Transactions

We measure the cost of equity-settled transactions with employees based on the fair value of the equity instruments at the date at which they are granted and measures the cost of cash-settled transactions based on the fair value of the equity instrument at the date of reporting. We have applied the Black-Scholes valuation model to estimate fair value. The use of this model requires management to make assumptions regarding the volatility and expected life of the equity instruments. The assumptions used to determine fair value for share-based payment transactions are disclosed in Note 14 to our consolidated financial statements and are estimated as follows:

•

The dividend return is estimated by reference to the historical dividend payment. Currently, this is estimated to be zero as no dividends have been paid since inception;

•

Expected volatility is determined based on the average annualized volatility of our shares (until September 2016: of a number of quoted peers in the 3D printing industry and the volatility of our shares);

•

Estimated life of the warrant is determined to be until the first exercise period which is typically the month after vesting; and

•

Fair value of the shares is determined based on the share price of our ADSs on Nasdaq at the date of valuation. For the grants prior to the initial public offering, the fair value of the shares was estimated based on a discounted cash flow model with three-year cash flow projections and a multiple of EBITDA determined based on a number of quoted peers in the 3D printing industry.

Income Taxes

Deferred tax assets are recognized only to the extent that it is probable that taxable profit will be available against which the deductible temporary difference can be utilized. Significant management judgment is required to determine the amount of deferred tax assets that may be recognized, based on the probable timing and level of future taxable profits, together with future tax planning strategies. As of December 31, 2021, we had current and

non-current

receivables related to tax credits for an amount of € 5 million (2020: € 5 million; 2019: € 4 million)

As of December 31, 2021, we had € 58 million (2020: € 51 million; 2019: € 37 million) of tax losses carried forward and unused Innovation Income Deductions, of which € 36 million related to Materialise NV (2020: € 28 million; 2019: € 25 million). These losses related to Materialise NV and subsidiaries that have a history of losses, in countries where these losses do not expire and may not be used to offset taxable income elsewhere in our consolidated group.

With respect to the unused tax losses of Materialise NV, no deferred tax assets have been recognized in 2021, 2020 and 2019, given that in view of the Belgian Patent Income Deduction and Innovation Income Deduction there is an uncertainty to which extent these tax losses will be used in future years. As from July 1, 2016, the new Innovation Income Deduction replaces the former Patent Income Deduction. Under the grandfathering rule the Patent Income Deduction system can still be applied until June 30, 2021. The Belgian Patent Income Deduction allows companies to deduct 80% of the qualifying gross patent income from the taxable basis. Under the Innovation Income Deduction system, companies can deduct up to 85% of their net innovation income from the taxable basis. Based on our analysis and according to our policy we have assessed that in 2021 no deferred tax asset should be accounted for with respect to our unused tax losses in Belgium.

With respect to the unused tax losses of the other entities, no deferred tax assets have been recognized in 2021, 2020 nor 2019 except for our tax unity in Germany where we recorded a deferred tax asset of € 0.3 million related to 2020 losses and Materialise Motion where we recorded a deferred tax asset of € 1.8 million against a deferred tax liability of € 2.0 million. We have not recognized deferred tax assets on unused tax losses and Innovation Income Deduction totaling € 12 million in 2021 (2020: € 23 million; 2019: € 11 million) given that it is not probable that sufficient positive taxable base will be available in the foreseeable future against which these tax losses and Innovation Income Deduction can be utilized.

Table of Contents

If all deferred tax assets related to tax losses carried forward and unused Innovation Income Deduction would meet the criteria for recognition, net result for the year would have improved by €12 million in 2021 through a deferred tax gain. This would represent the planned recovery of €49 million carried forward tax losses and Innovation Income Deduction in future periods. Further details on taxes are disclosed in Note 22.10 to our consolidated financial statements.

Impairment of Goodwill, Intangible Assets and Property, Plant & Equipment

We have goodwill for a total amount of € 18.7 million as of December 31, 2021 (2020: € 18.6 million; 2019: € 19.6 million) which has been subject to an impairment test. Goodwill is tested for impairment based on a discounted cash flow model with cash flows for the next five years derived from the budget, and a residual value considering a perpetual growth rate. The value in use is sensitive to the discount rate used for the discounted cash flow model as well as the expected future cash-inflows and the growth rate used for extrapolation purposes. The key assumptions used to determine the value in use for the different cash generating units, or CGUs, are disclosed and further explained in Note 5 to our consolidated financial statements

In 2020 an impairment was recognized on the Engimplan CGU. It was concluded that the value in use was lower than the carrying value of the CGU of € 9.3 million which resulted in a full impairment of the goodwill for an amount of € 1.4 million as well as a partial impairment on intangible assets of customer lists and trade marks for respectively € 0.9 million and € 0.2 million. The key events that led to the impairment loss for the Engimplan CGU were a loss of business resulting from the

COVID-19

pandemic and a slower recovery from the pandemic than expected, and a slower than expected benefit from the anticipated synergies of the Engimplan acquisition. The 2021 impairment exercise showed no further impairment on intangible assets, nor a reversal of impairment.

In 2021 we recorded a goodwill impairment of € 0.2 million on the CGU Metal in Belgium, formerly the company Aldema BV. We acquired all shares and voting rights of Aldema BV in 2015 for € 0.1 million. With the creation of the Materialise Metal Competence Center in Bremen, Germany, the recoverable amount of this asset decreased to 0.

When events or changes in circumstances indicate that the carrying amount of the intangible assets and property, plant & equipment may not be recoverable, we estimate the value in use for the individual assets, or when not possible, at the level of CGUs to which the individual assets belong. Total impairment charges recorded during 2021 were € 0.1 million (€ 4.6 million in 2021 and € 0 in 2020).

Business Combinations

We determine and allocate the purchase price of an acquired business to the assets acquired and liabilities assumed as of the business combination date. The purchase price allocation process requires us to use significant estimates and assumptions, including:

•

estimated fair value of the acquired intangible assets;

•

estimated fair value of property, plant and equipment; and

•

estimated fair value of the contingent consideration.

The contingent consideration as included in the financial statements is recorded at fair value at the date of acquisition and is reviewed on a regular basis, at least annually. The fair value of the contingent consideration is based on risk-adjusted future cash flows of different scenarios discounted using appropriate interest rates. The structure of the possible scenarios and the probability assigned to each one of them is reassessed by management at every reporting period and requires judgement from management about the outcome and probability of the different scenarios as well as the evolution of the variables.

While we are using our best estimates and assumptions as part of the purchase price allocation process to accurately value assets acquired and liabilities assumed at the date of acquisition, our estimates and assumptions are inherently uncertain and subject to refinement. Examples of critical estimates in valuing certain of the intangible assets we have acquired or may acquire in the future, include but are not limited to:

•

future expected cash flows from customer contracts and relationships, software license sales and maintenance agreements;

•

the fair value of the plant and equipment;

•

the fair value of the deferred revenue;

•

discount rates; and

•

the technology royalty rate

Provision for Expected Credit Losses, or ECLs, of Trade Receivables and Contract Assets

We use a provision matrix to calculate ECLs for trade receivables and contract assets. The provision rates are based on days past due for groupings of various customer segments that have similar loss patterns (i.e., by legal entity).

The provision matrix is initially based on our historical observed default rates. The matrix is calibrated to adjust the historical credit loss experience with forward-looking information. For example, if economic conditions (i.e., gross domestic product) are expected to deteriorate over the next year which can lead to an increased number of defaults, the historical default rates are adjusted. At each reporting date, the historical observed default rates are updated and changes in the forward-looking estimates are analyzed.

Table of Contents

The assessment of the correlation between historical observed default rates, expectations of economic conditions and ECLs is a significant estimate. The amount of ECLs is sensitive to changes in circumstances and of forecast economic conditions. Our historical credit loss experience and expectations of economic conditions may also not be representative of a customer’s actual default in the future. Information about the ECLs on our trade receivables and contract assets is disclosed in Note 25 to our consolidated financial statements.

Convertible Loans Granted to FluidDa & Ditto

We account for the convertible loan granted to FluidDa in January 2019, with a notional amount of € 2.5 million, at fair value. The carrying value of the convertible loan amounts to € 3.6 million at December 31, 2021. FluidDa is a private

start-up

company which offers turnkey contract research services for drug development and medical device development. FluidDa is currently loss-making. In determining the fair value of the convertible loan, we consider different contractual parameters such as the repayment and conversion scenarios and dates. In addition, we must make significant estimates such as (i) the discount rate, (ii) the probability and timing of each repayment and conversion scenario, and (iii) the amount of a qualified capital increase that will determine the conversion factor. The convertible loan has a duration of seven years with a 10% annual interest rate which is capitalized. We have applied a discount factor of 12.87% that is based on the estimated weighted average cost of capital of FluidDa, reflecting the uncertainty in relation to FluidDa’s ability to be successful and the applied estimates by our consolidated group.

At December 31, 2021 the carrying value of the convertible loan amounted to € 3.6 million which included a fair value adjustment of € 0.3 million recorded in financial income during 2020. Changes in significant assumptions may lead to a significant increase or decrease in the fair value of the convertible loan.

The convertible loan that was granted at fair value to Ditto Technologies Inc. in August 2020 amounted to € 3 million and was fully repaid in August 2021, subsequent to the acquisition of Ditto by

1-800

Contacts.

Changes in useful life for certain assets

We review the useful life for the intangible assets and property, plant and equipment on an annual basis considering the current facts and circumstances available. This review has not resulted in 2021 in a

re-assessment

of the useful life for certain specific assets in the categories buildings, fixtures, vehicles and machinery. We refer to Note 7 to our audited consolidated financial statements for the impact of the change in useful lives during the year 2021.

Leases IFRS 16 – Estimating the Discount Rate and Probability of Exercising Extension Options/Termination Options and Purchase Options

As we cannot always determine the interest rate implicit in lease contracts, we must estimate the incremental borrowing rate to measure certain lease liabilities such as buildings. For buildings, we use the property yield as a reference to determine the incremental borrowing rate. For other assets, we generally use the interest rate implicit in the lease contract or apply the incremental borrowing rate for a portfolio of similar assets. The incremental borrowing rate reflects what we “would have to pay”, which requires estimation when no observable rates are available or when they need to be adjusted to reflect the terms and conditions of the lease.

In addition, certain lease contracts may have extension options, termination options (in the case of property leases) and/or purchase options (in the case of leases). We estimate whether it is reasonably certain that such options will be exercised, which impacts the lease term in the case of extension options and termination options and the period over which the lease assets are depreciated in the case of purchase options.

Recent Accounting Pronouncements

The standards and interpretations that are issued, but not yet effective, up to the date of issuance of our financial statements are disclosed in our financial statements included elsewhere in this annual report. Of those standards that are not yet effective, none are expected to have a material impact on our financial statements in the period of initial application.

Table of Contents

Other Financial Information

We believe EBITDA and Adjusted EBITDA are meaningful measures to our investors to enhance their understanding of our financial performance. Although EBITDA and Adjusted EBITDA are not necessarily a measure of our ability to fund our cash needs, we understand that it is frequently used by securities analysts, investors and other interested parties as a measure of financial performance and to compare our performance with the performance of other companies that report EBITDA or Adjusted EBITDA. Management believes these

non-IFRS

measures to be important measures as they exclude the effects of items which primarily reflect the impact of long-term investment and financing decisions, rather than the performance of our

day-to-day

operations. As compared to net profit, these measures are limited in that they do not reflect the periodic costs of certain capitalized tangible and intangible assets used in generating revenues in our business, or the charges associated with impairments. Management evaluates such items through other financial measures such as capital expenditures and cash flow provided by operating activities. We believe that these measurements are useful to measure a company’s ability to grow or as a valuation measurement. Our calculation of EBITDA and Adjusted EBITDA may not be comparable to similarly titled measures reported by other companies.

We calculate EBITDA as net profit (loss) plus income tax expense (benefit), financial expenses (less financial income), depreciation and amortization, and share in loss of joint venture. We calculate Adjusted EBITDA by adding share-based compensation expenses, acquisition-related expenses of business combinations, impairments and

re-valuation

of fair value due to business combinations to EBITDA.

Disclosure in this annual report of EBITDA and Adjusted EBITDA, which are

non-IFRS

financial measures, is intended as a supplemental measure of our performance that is not required by, or presented in accordance with, IFRS. EBITDA and Adjusted EBITDA should not be considered as alternatives to net profit or any other performance measure derived in accordance with IFRS. Our presentation of EBITDA and Adjusted EBITDA should not be construed to imply that our future results will be unaffected by unusual or

non-recurring

items.

Reconciliation of Net Profit to Adjusted EBITDA (unaudited) on a Consolidated Basis


	For the year ended December 31,
in 000€	2021			2020*			2019
Net profit (loss)		13,145			(7,192	)		1,644
Income tax expense / (benefit)		591			(1,028	)		2,595
Financial expenses		4,101			5,995			3,682
Financial income		(5,620	)		(2,452	)		(1,377	)
Depreciation and amortization		20,516			19,775			19,278
Share in loss of joint venture		—			39			392
EBITDA (unaudited)		32,733			15,137			26,214
Share-based compensation expenses (1)		(833	)		1,344			302
Acquisition-related expenses of business combinations (2)		413			63			140
Impairments (3)		177			4,606			—
Re-valuation of 50% Materialise Motion interest (4)		—			(770	)		—
Adjusted EBITDA (unaudited)		32,490			20,380			26,656

(1)	Share-based compensation expenses represent the cost of equity-settled and cash-settled share-based payments to employees.

(2)	Acquisition-related expenses of business combinations represent fees and costs in connection with the acquisition of Engimplan in 2019,the acquisition of Materialise Motion in 2020 and the acquisition of Link3D on January 4, 2022

(3)	Impairments represents the impairment of capitalized expenditures related to our tracheal splint development project (€2.1 million) and the impairment of goodwill and intangible assets of Engimplan (€2.5 million) in 2020 and related to the impairment of goodwill of Aldema BV (€0.2 million) in 2021

(4)	Represents a positive revaluation of our initial 50% interest in Materialise Motion after our acquisition of the remaining interest in the joint venture.

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion.

Table of Contents

Results of Operations

Comparison of Years Ended December 31, 2021 and 2020


	For the year ended December 31,
in 000€, except percentages	2021			2020*			% Change
Revenue		205,450			170,449			20.5	%
Cost of sales		(87,278	)		(76,446	)		14.2	%
Gross profit		118,172			94,003			25.7	%
Research and development expenses		(26,891	)		(27,104	)		-0.8	%
Sales and marketing expenses		(49,151	)		(44,636	)		10.1	%
General and administrative expenses		(33,315	)		(29,337	)		13.6	%
Net other operating income		3,402			2,436			39.7	%
Operating profit		12,217			(4,638	)
Financial expenses		(4,101	)		(5,995	)
Financial income		5,620			2,452
Share in loss of joint venture		—			(39	)
Profit before taxes		13,736			(8,220	)
Income taxes		(591	)		1,028
Net profit		13,145			(7,192	)

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion.

Comparison of Years Ended December 31, 2021 and 2020 by Segment


in 000€	Materialise Software			Materialise Medical			Materialise Manufacturing			Total segments			Unallocated			Consolidated
For the year ended December 31, 2021
Revenues		42,902			73,368			89,180			205,450			—			205,450
Segment Adjusted EBITDA		15,705			20,669			6,275			42,649			(10,159	)		32,490
Segment Adjusted EBITDA %		36.6	%		28.2	%		7.0	%		20.8	%		—			15.8	%
For the year ended December 31, 2020
Revenues		39,054			61,729			69,635			170,418			31			170,449
Segment Adjusted EBITDA		13,383			13,915			2,548			29,846			(9,468	)		20,378
Segment Adjusted EBITDA %		34.3	%		22.5	%		3.7	%		17.5	%		—			12.0	%

(1)

Unallocated Segment Adjusted EBITDA consists of corporate research and development, corporate headquarter costs and other operating income (expense) and the added share-based compensation expenses, acquisition related expenses of business combinations, impairment and fair value of business combinations that are included in Adjusted EBITDA when not attributable to a segment.

Revenue.

Revenue was € 205.5 million in the year ended December 31, 2021 compared to € 170.4 million in the year ended December 31, 2020, an increase of €35 million, or 21%. Compared to € 196.7 million in the year ended December 31, 2019, our 2021 revenue increased by 4%.

As discussed below under “—Trend Information” below, in 2020, the vast majority of the businesses addressed by our segments were adversely affected by the effects of the

COVID-19

pandemic, which had a negative impact on our results of operations. These effects diminished in 2021, although we continued to experience a negative impact from the pandemic in certain business lines that have not yet recovered in full. In particular, during the first half of 2021, order intake levels from automotive, aerospace, and certain industrial clients in our Materialise Software and Materialise Manufacturing segments remained below pre-pandemic 2019 levels.

Table of Contents

Revenue by geographical area is presented as follows:


	For the year ended December 31,
in 000€	2021		2020
Americas		75,437		52,562
Europe & Africa		110,477		100,371
Asia-Pacific		19,536		17,516
Total		205,450		170,449

Revenue generated in Europe increased by € 10.1 million , or 10.1 %, in the year ended December 31, 2021 compared to the year ended December 31, 2020, mainly due to higher revenue from our Materialise Manufacturing segment and to a lesser extent due to higher revenue from our Materialise Software segment. Revenue from the Materialise Medical segment remained consistent between the year ended December 31, 2021 compared to the year ended December 31, 2020. Revenue generated throughout the Americas increased by € 22.9 million, or 43.5%, in the year ended December 31, 2021 compared to the year ended December 31, 2020. In the Americas, revenue for the Materialise Manufacturing segment and for the Materialise Medical segment increased and revenue for the Materialise Software segment remained consistent. Revenue generated in Asia-Pacific increased by € 2.0 million, or 11.5% in the year ended December 31, 2021 compared to the year ended December 31, 2020, as revenue increased across all three Materialise segments.

During 2021, we had increased revenue in all three of our segments compared to 2020.

Revenue from our Materialise Software segment increased € 3.8 million, or 9.9%, from € 39.1 million in the year ended December 31, 2020 to € 42.9 million in the year ended December 31, 2021. Recurrent revenue, consisting of limited license fees and maintenance fees, decreased by 1.9%.

Non-recurrent

revenue, mainly consisting of perpetual fees and services, grew by 27.6%. Deferred revenue from license and maintenance fees increased with € 1.9 million in the year ended December 31, 2021.

Revenue from our Materialise Medical segment increased € 11.6 million, or 18.9%, from € 61.7 million in the year ended December 31, 2020 to € 73.4 million in the year ended December 31, 2021. Within our medical software department recurrent revenue from annual and renewed licenses and maintenance fees increased by 23.1%, reflecting the implementation of our continued strategy focused on products with defined contractual periods. These recurrent revenues represented 83.0% of all medical software revenues in the year ended December 31, 2021, compared to 77.0% in the year ended December 31, 2020. Our

non-recurrent

revenue from perpetual licenses and services decreased by 16.3%. Revenues from medical devices and services grew 21.2% in the year ended December 31, 2021, driven by our CMF business line. As of December 31, 2021, our Materialise Medical segment operated 48 3D printers, as compared to 41 as of December 31, 2020.

Revenue from our Materialise Manufacturing segment increased € 19.6 million, or 28.2%, from € 69.6 million in the year ended December 31, 2020 to € 89.2 million in the year ended December 31, 2021. Although the automotive, aerospace and certain other industrial business lines continued to be negatively impacted by the ongoing

COVID-19

pandemic (in 2021, particularly during the first half of 2021), all business lines recovered strongly in the second half of 2021 despite remaining below

pre-pandemic

2019 levels. However, revenue from the Materialise Motion business line increased € 5.5 million to € 6.3 million in the year ended December 31, 2021, compared to € 0.8 million for the year ended December 31, 2020. Materialise Manufacturing operated 153 3D printers and 6 vacuum casting machines as of December 31, 2021, compared to 147 and 6 as of December 31, 2020, respectively.

Cost of sales.

Cost of sales was € 87.3 million in the year ended December 31, 2021, compared to € 76.4 million in the year ended December 31, 2020, representing an increase of € 10.9 million, or 14.2%. This increase in cost of sales was mainly related to increased sales volumes.

Gross profit.

Gross profit increased € 24.2 million from € 94.0 million in the year ended December 31, 2020, to € 118.2 million in the year ended December 31, 2021, mainly driven by increased revenue in all three Materialise segments, and improved production capacity levels and efficiencies. The overall gross profit margin (gross profit divided by our revenue) amounted to 57.5% in the year ended December 31, 2021, compared to 55.2% in the year ended December 31, 2020.

Research and development, or R&D, sales and marketing, or S&M, and general and administrative, or G&A,

expenses

. R&D, S&M and G&A expenses increased, in the aggregate, to € 109.4 million in the year ended December 31, 2021, compared to € 101.1 million in the year ended December 31, 2020. R&D expenses decreased from € 27.1 million to € 26.9 million. Excluding the € 2.1 million impairment charge on our tracheal splint program incurred in 2020, R&D expenses increased 7.5% in 2021. S&M expenses increased from € 44.6 million to € 49.2 million, driven by our Materialise Manufacturing segment, including our eyewear and Materialise Motion business lines. In the aggregate, S&M expenses were € 3.8 million below the pre-pandemic levels of the year ended December 31, 2019, because of continued lower travel expenses and cost containment in general. G&A expenses increased from € 29.3 million to € 33.3 million. The increase in G&A expenses was mainly due to the

roll-out

of our ongoing internal digital transformation program.

Net other operating income.

Net other operating income increased to € 3.4 million in the year ended December 31, 2021, compared to € 2.4 million in the year ended December 31, 2020. The 2020 result included the € 2.5 million impairment of goodwill and intangibles related to the Engimplan acquisition of 2019, as a result of the

COVID-19

pandemic in Brazil that delayed the roll out of our business plan in that region, including the introduction of 3D printed devices. The 2020 result also included a positive € 0.8 million revaluation of our initial 50% interest in Materialise Motion. The 2021 Net other operating income includes the cost of € 0.2 million impairment of goodwill from the acquisition of Aldema (Metal Belgium) in 2015.

Table of Contents

Net financial income (financial income and financial expense)

. Net financial income was € 1.5 million in the year ended December 31, 2021, compared to a net expense of € 3.5 million in the year ended December 31, 2020. This difference of € 5.0 million included a realized exchange gain of € 3.7 million, mainly from positive exchange differences from our USD proceeds on the

follow-on

offering in June and July of 2021, and € 0.7 million of interest income.

Income taxes

. Income taxes in the year ended December 31, 2021 resulted in a cost of € 0.6 million, which was a combination of deferred tax income amounting to € 0.7 million and current income tax expenses of € 1.3 million. This income tax cost was mainly due to the growth in revenue, as well as the fact that mark-ups and margins applied under our consolidated group’s transfer pricing arrangements returned to pre-pandemic levels as from July 1, 2021.

Net profit

. As a result of the elements described above, net profit amounted to € 13.1 million in the year ended December 31, 2021 compared to a net loss of € 7.2 million in the year ended December 31, 2020, or an increase of € 20.3 million.

EBITDA.

As a result of the factors described above, our consolidated EBITDA increased from € 15.1 million* in the year ended December 31, 2020 to € 32.7 million in the year ended December 31, 2021, an increase of € 17.6 million, or 117%. Our 2021 EBITDA included expenses of € 0.2 million from the Aldema BV goodwill impairment. Our 2020 EBITDA included expenses of €2.5 million from Engimplan’s impairment and €2.1 million from the tracheal splint development project impairment, and income for €0.8 million from the revaluation of our initial 50% interest in Materialise Motion. These expenses and income were, among others, not reflected in our Adjusted EBITDA. Our Adjusted EBITDA increased from € 20.4 million in the year ended December 31, 2020 to € 32.5 million in the year ended December 31, 2021, an increase of € 12.1 million, or 59%. Our total segment Adjusted EBITDA increased from € 29.8 million in the year ended December 31, 2020 to € 42.7 million in the year ended December 31, 2021, an increase of € 12.9 million, or 43%.

Our Materialise Software segment’s Adjusted EBITDA increased from € 13.4 million in the year ended December 31, 2020 to € 15.8 million in the year ended December 31, 2021, an increase of € 2.4 million, or 17.9%. This segment’s Adjusted EBITDA margin (the segment’s Adjusted EBITDA divided by the segment’s revenue) increased from 34.3% for the year ended December 31, 2020 to 36.8% in the year ended December 31, 2021. The increase in the Adjusted EBITDA margin was a result of the 9.9% growth in revenue, while S&M, R&D and G&A expenditures in the aggregate increased by 5.5% .

Our Materialise Medical segment’s Adjusted EBITDA increased from € 13.9 million in the year ended December 31, 2020 to € 20.7 million in the year ended December 31, 2021. The segment’s Adjusted EBITDA margin increased from 22.5% in the year ended December 31, 2020 to 28.2% in the year ended December 31, 2021. The increase in the segment’s Adjusted EBITDA margin was due to the 18.9% growth in revenue, and improved production capacity levels and efficiencies, while S&M, R&D, and G&A expenditures in the aggregate increased 6.1%. The year ended December 31, 2020 included a € 2.1 million impairment charge on our tracheal splint development project.

Our Materialise Manufacturing segment’s Adjusted EBITDA increased from € 2.5 million in the year ended December 31, 2020 to € 6.3 million in the year ended December 31, 2021. The Adjusted EBITDA margin of this segment increased from 3.7% in the year ended December 31, 2020 to 7.0% in the year ended December 31, 2021, as a result of the 28% revenue growth, and improved production capacity levels and efficiencies.

Reconciliation of Net Profit to Segment Adjusted EBITDA


	For the year ended December 31,
in 000€	2021			2020*
Net profit		13,145			(7,192	)
Income tax expense / (benefit)		591			(1,028	)
Finance costs		4,101			5,995
Finance income		(5,620	)		(2,452	)
Share in loss of joint venture		—			39
Operating profit / loss		12,217			(4,638	)
Depreciation and amortization		20,516			19,775
Corporate research and development		2,948			2,824
Corporate headquarters costs		10,317			11,719
Net other operating (income) expense		(3,527	)		(3,668	)
Impairments		177			4,606
Re-valuation of 50% Materialise Motion interest		—			(770	)
Segment adjusted EBITDA (unaudited)		42,648			29,848

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion.

Table of Contents

Comparison of Years Ended December 31, 2020 and 2019


	For the year ended December 31,
in 000€, except percentages	2020*			2019			% Change
Revenue		170,449			196,679			-13.3	%
Cost of sales		(76,446	)		(87,052	)		-12.2	%
Gross profit		94,003			109,627			-14.3	%
Research and development expenses		(27,104	)		(23,348	)		16.1	%
Sales and marketing expenses		(44,636	)		(52,989	)		-15.8	%
General and administrative expenses		(29,337	)		(31,786	)		-7.7	%
Net other operating income (expenses)		2,436			5,432			-55.2	%
Operating profit		(4,638	)		6,936			-166.9	%
Financial expenses		(5,995	)		(3,682	)		62.8	%
Financial income		2,452			1,377			78.1	%
Share in loss of joint venture		(39	)		(392	)		-90.1	%
Profit (loss) before taxes		(8,220	)		4,239			-293.9	%
Income tax expense / (benefit)		1,028			(2,595	)		-139.6	%
Net profit (loss)		(7,193	)		1,644			-537.5	%

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion.

Table of Contents

Comparison of the Years Ended December 31, 2020 and 2019 by Segment


in 000€	Materialise Software			Materialise Medical			Materialise Manufacturing			Total segments			Unallocated (1)			Consolidated
For the year ended December 31, 2020
Revenues		39,054			61,729			69,635			170,418			31			170,449
Segment Adjusted EBITDA		13,383			13,914			2,546			29,843			(9,465	)		20,378
Segment Adjusted EBITDA %		34.3	%		22.5	%		3.7	%		17.5	%		—			12.0	%
For the year ended December 31, 2019
Revenues		41,654			60,808			94,156			196,618			61			196,679
Segment Adjusted EBITDA		13,812			10,774			12,154			36,740			(10,084	)		26,656
Segment Adjusted EBITDA %		33.2	%		17.7	%		12.9	%		18.7	%		0.0	%		13.6	%

(1)

Revenue.

Revenue was € 170.4 million in the year ended December 31, 2020 compared to € 196.7 million in the year ended December 31, 2019, a decrease of € 26.2 million, or 13.3%.

Revenue by geographical area is presented as follows:


	For the year ended December 31
in 000€	2020		2019
Americas		52,562		59,630
Europe & Africa		100,371		117,784
Asia-Pacific		17,516		19,265
Total		170,449		196,679

Revenue generated in Europe decreased by € 17.4 million, or 14.8%, in the year ended December 31, 2020 compared to the year ended December 31, 2019, mainly due to lower revenue from our Materialise Manufacturing segment, and to a lesser extent due to lower revenue from our Materialise Software and Materialise Medical segments. Revenue generated throughout the Americas decreased by € 7.1 million, or 11.9%, in the year ended December 31, 2020 compared to the year ended December 31, 2019. In the Americas, revenue from the Materialise Manufacturing segment decreased, revenue from the Materialise Medical segment increased and revenue from the Materialise Software segment was essentially flat. Revenue generated in Asia-Pacific decreased by € 1.7 million , or 9.1%, in the year ended December 31, 2020 compared to the year ended December 31, 2019. The main decreases in this region occurred in the Materialise Software and the Materialise Manufacturing segments.

Revenue from our Materialise Software segment decreased 6.2% from € 41.7 million in the year ended December 31, 2019 to € 39.1 million in the year ended December 31, 2020. Recurrent revenue, consisting of limited license fees and maintenance fees, grew 14.9%.

Non-recurrent

revenue, mainly consisting of perpetual fees, decreased 26.7%. Deferred revenue from license and maintenance fees was flat, compared to an increase of €3.1 million in the year ended December 31, 2019.

Revenue from our Materialise Medical segment increased € 0.9 million, or 1.5%, from € 60.8 million in the year ended December 31, 2019 to € 61.7 million in the year ended December 31, 2020. Medical software revenue grew by 3.3% from 2019 to 2020. Within our medical software department recurrent revenue from annual and renewed licenses and maintenance fees increased by 2.4%, reflecting the implementation of our continued strategy focused on products with defined contractual periods. These recurrent revenues represented 77.0% of all medical software revenues in the year ended December 31, 2020, compared to 77.7% in the year ended December 31, 2019. Our

non-recurrent

revenue from perpetual licenses and services increased also 6.3%. Revenues from medical devices and services grew 0.7% in the year ended December 31, 2020. As of December 31, 2020, our Materialise Medical segment operated 41 3D printers, as compared to 32 as of December 31, 2019.

Table of Contents

Revenue from our Materialise Manufacturing segment decreased from € 94.2 million in the year ended December 31, 2019 to € 69.6 million in the year ended December 31, 2020, representing a decrease of €24.5 million. During 2020, the revenue of our ACTech business decreased by € 18.2 million. The sales decrease was driven by the global economic impact of the

COVID-19

pandemic, which affected our manufacturing market segments in general, and the automotive and aerospace market in particular. As of December 31, 2020, Materialise Manufacturing operated 147 3D printers, six vacuum casting machines and 20 CNC machines, as compared to 149, six and 20 as of December 31, 2019, respectively. The total number of 3D printers decreased from the year ended December 31, 2019 to the year ended December 31, 2020, by 2 printers.

Cost of sales.

Cost of sales was € 76.4 million in the year ended December 31, 2020, compared to € 87.1 million in the year ended December 31, 2019, representing a decrease of €10.5 million, or 12.1%. This decrease in cost of sales was mainly related to decreases in sales volumes.

Gross profit.

Gross profit decreased € 15.7 million from € 109.7 million in the year ended December 31, 2019, to € 94.0 million in the year ended December 31, 2020, mainly driven by the decreased revenue in the Materialise Manufacturing segment. The overall gross profit margin (gross profit divided by our revenue) amounted to 55.2% in the year ended December 31, 2020, compared to 55.8% in the year ended December 31, 2019. The slight deterioration of the margin was mainly driven by the decrease in sales volume in the Materialise Manufacturing segment. The corresponding decrease in revenue was not fully matched by the reductions in certain fixed costs, mainly salary costs, from efficiency programs that were implemented during the year ended December 31, 2020.

Research and development, or R&D, sales and marketing, or S&M, and general and administrative, or G&A,

expenses

. R&D, S&M and G&A expenses decreased, in the aggregate, to €101.1 million in the year ended December 31, 2020, compared to €108.1 million in the year ended December 31, 2019. R&D expenses increased from € 23.3 million to € 27.1 million, S&M expenses decreased from € 53.0 million to € 44.6 million and G&A expenses decreased from € 31.8 million to € 29.3 million. The R&D cost increase included an impairment charge on the tracheal splint development project of € 2.1 million. However, even without this cost, the R&D expenses increased 7.1% from € 23.3 million to € 25.0 million. In total, the intangible assets related to the internal development projects amounted to € 1.1 million on our balance sheet at December 31, 2020.

Net other operating income.

Net other operating income decreased to € 2.4 million in the year ended December 31, 2020, compared to € 5.4 million in the year ended December 31, 2019. The 2020 result included the € 2.5 million impairment of goodwill and intangibles related to the Engimplan acquisition of 2019, as a result of the

COVID-19

Net financial expense (financial expenses and financial income)

. In each of 2019 and 2020, the net financial expense mainly related to the net interest expense from loans and deposits of financial institutions. The net financial result (financial expenses and financial income) increased from € 2.3 million in the year ended December 31, 2019 to € 3.5 million in the year ended December 31, 2020. This increase was mainly due to an increase of (un)realized exchange losses of € 1.5 million, partly offset by the fair value adjustment of the FluidDa convertible loan for € 0.3 million.

Income taxes

. Income taxes in the year ended December 31, 2020 resulted in a benefit of € 1.0 million, which was a combination of deferred tax benefit of € 1.0 million and current income taxes of € 0.0 million. This tax benefit was mainly due to the new German tax law enabling tax carry-back on 2019 taxes. Income tax expenses in 2019 amounted to € 2.6 million.

Net profit

*. As a result of the factors described above, net loss was € 7.2 million in the year ended December 31, 2020 compared to a net profit of € 1.6 million in the year ended December 31, 2019, or a decrease of € 8.8 million.

EBITDA.

As a result of the factors described above, our consolidated EBITDA decreased from € 26.2 million in the year ended December 31, 2019 to € 15.1 million in the year ended December 31, 2020, a decrease of €11.1 million, or 42.3%. Our EBITDA included expenses of € 2.5 million from Engimplan’s impairment and € 2.1 million from the tracheal splint development project impairment, and income for € 0.8 million from the revaluation of our initial 50% interest in Materialise Motion, which expenses and income were not reflected in our Adjusted EBITDA. Our Adjusted EBITDA decreased from €26.7 million in the year ended December 31, 2019 to €20.4 million in the year ended December 31, 2020, a decrease of € 6.3 million, or 23.5%.

Our Materialise Software segment’s Adjusted EBITDA decreased from € 13.8 million in the year ended December 31, 2019 to € 13.4 million in the year ended December 31, 2020, a decrease of €0.4 million, or 3.1%. This segment’s Adjusted EBITDA margin (the segment’s Adjusted EBITDA divided by the segment’s revenue) increased from 33.2% for the year ended December 31, 2019 to 34.3% in the year ended December 31, 2020. The increase in the Adjusted EBITDA margin was due to cost control measures related to compensation and other expenses. The revenue decreased by 6.2% (which was due to the

COVID-19

pandemic), which was almost completely matched by a decrease in operating expenses by 8.3%, mainly in G&A expenses and S&M expenses. The segment’s R&D costs were flat.

Table of Contents

Our Materialise Medical segment’s Adjusted EBITDA increased from € 10.8 million in the year ended December 31, 2019 to €13.9 million in the year ended December 31, 2020. The segment’s Adjusted EBITDA margin increased from 17.7% in the year ended December 31, 2019 to 22.5% in the year ended December 31, 2020. The segment’s Adjusted EBITDA margin was affected positively by cost control measures related to raw materials, S&M expenses and G&A expenses. The segment’s R&D expenses increased.

Our Materialise Manufacturing segment’s Adjusted EBITDA decreased from € 12.2 million in the year ended December 31, 2019 to € 2.5 million in the year ended December 31, 2020. The Adjusted EBITDA margin of this segment decreased from 12.9% in the year ended December 31, 2019 to 3.7% in the year ended December 31, 2020. While the gross margin dropped by 7%, operating expenses (S&M, R&D, and G&A) decreased by 14.7%.

Table of Contents

Reconciliation of Net Profit to Segment Adjusted EBITDA


	For the year ended December 31,
in 000€	2020*			2019
Net profit (loss)		(7,192	)		1,644
Income tax expense / (benefit)		(1,028	)		2,595
Finance costs		5,995			3,682
Finance income		(2,452	)		(1,377	)
Share in loss of joint venture		39			392
Operating profit		(4,639	)		6,936
Depreciation and amortization		19,775			19,278
Corporate research and development		2,824			1,859
Corporate headquarters costs		11,719			11,077
Net other operating income (expense)		(3,668	)		(2,410	)
Impairments		4,606			—
Re-valuation of 50% Materialise Motion interest		(770	)		—
Segment Adjusted EBITDA (unaudited)		29,847			36,740

*	The year 2020 has been adjusted retrospectively restated to reflect the final accounting of the business combination with Materialise Motion.

B. Liquidity and Capital Resources

Prior to our initial public offering, we historically funded our operations principally from cash generated from operations and borrowings. From our initial public offering on June 30, 2014 through December 31, 2021, we have raised approximately $258.5 million in aggregate net proceeds from public offerings of our ADSs and a private placement of our ordinary shares. Most recently, on July 6, 2021, we sold 4,600,000 ADSs in a

follow-on

public offering at a public offering price of $24.00 per ADS, and received net proceeds of approximately $105 million. As we continue to grow our business, we envision funding our operations through multiple sources, including the remaining proceeds from our equity offerings, and future earnings and cash flow from operations and borrowings. We may also seek to raise additional capital from offerings of our equity or debt securities on an opportunistic basis when we believe there are suitable opportunities for doing so.

We expect our main uses of cash in the future will be funding our business operations, capital expenditures and loan reimbursements, acquisitions and partnerships. We believe that we will have sufficient liquidity to satisfy the operating requirements of our business through the next 12 months.

Our liquidity plans are subject to a number of risks and uncertainties, including those described in the section of this annual report titled “Item 3. Key Information—D. Risk Factors,” some of which are outside of our control. Macro-economic conditions, including the impact of the

COVID-19

pandemic and the armed conflict in Ukraine on the global economy, could hinder our business plans, which could, in turn, adversely affect our financing strategy.

Cash Flows

The table below summarizes our cash flows from operating activities, investing activities and financing activities for the years ended December 31, 2021, 2020 and 2019.


	For the year ended December 31,
in 000€	2021			2020			2019
Net cash flow from operating activities		25,845			29,978			28,402
Net cash flow from/(used in) investing activities		(13,134	)		(28,265	)		(25,617	)
Net cash flow from/(used in) financing activities		71,156			(16,888	)		10,781
Net increase / (decrease) of cash and cash equivalents		83,867			(15,175	)		13,566

Table of Contents

Comparison of Years Ended December 31, 2021 and 2020

Net cash flow from operating activities amounted to € 25.8 million in the year ended December 31, 2021 compared to € 30.0 million in the year ended December 31, 2020, a decrease of € 4.1 million, or 14%. The increase in Adjusted EBITDA of € 12.1 million was offset in full by the adverse impact from the revenue growth on our working capital.

Net cash flow used in investing activities was € 13.1 million in the year ended December 31, 2021 compared to € 28.3 million in the year ended December 31, 2020, a decrease of € 15.2 million, or 54%. In 2020, in addition to capital expenditures of €17.6 million, cash flow used in investing activities were impacted by the acquisition of our remaining interest in Materialise Motion and convertible loans we granted to Ditto and AM Flow. For more information regarding these loans, see Note 3 to our consolidated financial statements. In 2021, our capital expenditures amounted to € 11.7 million and the convertible loan granted to Ditto of € 3.9 million was fully repaid. We also granted a convertible loan to Link3D for € 2.2 million and purchased an option agreement to acquire Link3D for € 1.7 million. Additionally, PMV, who owned 16.66% of the shares of our subsidiary RapidFit NV, exercised its put option in 2021, resulting in us paying € 0.9 million to acquire this remaining 16.66% of the shares of RapidFit NV.

Net cash flow from financing activities was € 71.2 million in the year ended December 31, 2021 compared to € 16.9 million in net cash flow used in financing activities in the year ended December 31, 2020. The positive cash flow in 2021 was driven by the net capital increase € 88.1 million. In 2021, we also did not enter into any new loans or borrowings, while the repayment of borrowings and leases amounted to €18.1 million.

Comparison of Years Ended December 31, 2020 and 2019

Net cash flow from operating activities was € 30.0 million in the year ended December 31, 2020 compared to € 28.4 million in the year ended December 31, 2019, an increase of € 1.6 million, or 5.6%. The decrease in Adjusted EBITDA (€6.3 million) was offset in full by improvements in our working capital.

Net cash flow used in investing activities was € 28.3 million in the year ended December 31, 2020 compared to € 25.6 million in the year ended December 31, 2019, an increase of € 2.6 million, or 10.3%. In 2020, in addition to capital expenditures of € 17.6 million, cash flow used in investing activities were impacted by the acquisition of our remaining interest in Materialise Motion and convertible loans we granted to Ditto and AM Flow. For more information regarding these loans, see Note 3 to our consolidated financial statements.

Net cash flow used in financing activities was € 16.9 million in the year ended December 31, 2020 compared to € 10.8 million in net cash flow from financing activities in the year ended December 31, 2019, a decrease of € 27.7 million, or 256.7 %. In 2020 we did not enter into any new loans or borrowings, while the repayment of borrowings and leases amounted to €17.4 million. During 2019, we drew an additional €25.0 million tranche under our finance contract with the European Investment Bank, and €4.0 million to finance capital expenditures from other credit institutions.

Investments in Property, Plant & Equipment and Intangible Assets

The table below describes cash paid for investments in property, plant & equipment and intangible assets for the years ended December 31, 2021, 2020 and 2019:


	For the year ended December 31,
in 000€	2021		2020		2019
Purchase of property, plant and equipment		7,934		11,032		13,472
Purchase of intangible assets		3,788		6,618		2,193
Total		11,722		17,650		15,665

Table of Contents

Indebtedness

As of December 31, 2021, we had loans and borrowings in the total amount of € 99.1 million, with mainly fixed interest rates. These loans include secured bank loans used to finance the acquisition of ACTech, the construction of office and production facilities in Belgium and Poland, the acquisition of production equipment and installations, and research and development projects.

The following table sets forth our principal indebtedness:


	As of December 31
in 000€	2021		2020		2019
K€35,000 EIB bank loan		33,333		35,000		35,000
K€28,000 acquisition bank loan		15,604		18,621		21,612
K€18,000 secured bank loans		16,592		17,013		17,429
K€12,300 bank loans ACTech		8,160		10,470		11,850
K€9,050 other facility loans		2,248		2,910		3,599
Bank investment loans - top 20 outstanding		12,852		17,280		22,132
Bank investment loans - other		1,569		2,681		4,429
Lease liabilities		8,621		10,624		9,876
Institutional loan		—		353		824
Convertible bonds		—		—		1,000
Related party loan		128		158		187
Total loans and borrowings		99,107		115,110		127,938
Current		21,202		17,523		16,838
Non-Current		77,905		97,588		111,100

K€35,000 EIB bank loan

On December 20, 2017, we entered into a finance contract with the European Investment Bank, or EIB, to finance future research and development programs. The contract provides a credit of up to € 35.0 million drawable in two tranches. As part of the first tranche, an amount of €10.0 million was drawn in July of 2018. The duration of the loan will be between six to eight years, and includes a

two-year

loan repayment grace period.

In July 2019, the second tranche of € 25.0 million was drawn. Similar to the first tranche, the duration of the loan will be between six to eight years, and includes a

two-year

loan repayment grace period.

Loans under the contract are made at a fixed rate, based on the Euribor rate at the time of the borrowing, plus a variable margin. The applied rate for the first tranche is initially equal to 2.4%. The applied rate for the second tranche is initially equal to 2.72% and varies in function of certain EBITDA levels and debt ratios. The contract contains customary security, covenants and undertakings. Certain of the covenants have been temporarily waived or adjusted as a result of the

COVID-19

pandemic. For more information regarding these waivers, see Note 15 to our consolidated financial statements.

K€28,000

Acquisition loan

This bank loan was concluded in October 2017 to finance the acquisition of ACTech. The loan includes a portion of € 18.0 million, repayable monthly over seven years, and a bullet portion of € 10.0 million, payable at once in October 2024. The interest rate is fixed for the duration of the loan, and amounts to 1% on average for both portions. The bank loans are secured with a business pledge mandate, a share pledge on Materialise Germany GMBH, and debt covenants.

K€18,000 secured bank loans

The € 18.0 million loan has been concluded in 2016 in two agreements to finance the construction of new facilities in Leuven (Belgium) and in Poland, both maturing in 2032. The agreement for the Belgian facility financing amounts to € 12.0 million (drawn per end 2020: € 11.7 million; per end 2019 € 11.7 million), and with reimbursements only starting in December 2022. The agreement for the Polish facility financing amounts to € 6.0 million (fully drawn per end of 2018), and with reimbursements only starting in June 2019. The average interest rate of both agreements amounts to 1%. The bank loan is secured with a mortgage mandate on the Belgian facility buildings.

Table of Contents

K€12,300

bank loans

In March 2018, three bank loans originating from the acquired ACTech business were refinanced in their entirety for an aggregate amount of € 9.3 million, with the maturity adjusted to May 2025 and the first repayments beginning in August 2020. The interest rate was fixed at approximately 1.6%, and pledges including a € 4.7 million mortgage on ACTech’s facilities and guaranteed by Materialise NV. In addition, a new investment credit of € 3.0 million was obtained from Commerzbank in June 2018, repayable as from January 2019 and with a fixed interest rate of 1.5%.

K€9,050 - Other facility loans

Three facility loans were contracted in 2005, 2006 and 2012 for the construction of Leuven office and production facilities (€ 2.0 million, € 0.3 million and € 5.0 million respectively) and another loan for the Czech Republic offices in 2008 (€ 1.8 million). The aggregate balance of the four loans amounted to €2.9 million as of December 31, 2021. All loans have a repayment schedule of 15 years and interest rates are fixed between 4% and 5% for the four loans.

Bank investment loans

The 20 largest of these investment loans outstanding as of December 31, 2021 amount to a balance of € 12.9 million. They were agreed in 2018, 2017 and prior years to finance various investments in machinery, printers, equipment, and software tools. The vast majority of the loans have a reimbursement period over seven years, and are at fixed interest rates with weighted average below 1%.

K€8,621 Lease liabilities included lease with related party

We have had several lease obligations, mainly with financial institutions and related to the financing of buildings and various other items of plant and equipment such as 3D printers. As at December 31, 2021 the balance of these lease obligations amounts to € 8.6 million, and are mostly at fixed interest rates with weighted average below 2%.

K€2,000 institutional loan

This loan was contracted with a governmental institution in Germany to finance the production operations of Materialise Germany for a maximum amount of € 2.0 million. The loan was repayable over a four year period, starting as of September 2017 with a fixed interest rate of 0.25% payable per quarter. This loan was repaid in full during the year ended December 31, 2021.

Related party loan

Ailanthus NV previously granted us a loan at a fixed interest rate of 4.23% that matures in 2025. Prior to the merger between Ailanthus NV and Materialise NV, Ailanthus NV was demerged into Lunebeke NV, a newly incorporated company. As a result of this demerger, the loan was transferred from Ailanthus NV to Lunebeke NV. For more information on the merger and related demerger, see “Item 7. Major Shareholders and Related Party Transactions—B. Related Party Transactions.” The purpose of the loan was to finance the purchase of a building in France. The amounts outstanding as of December 31, 2021 were K€128 (2020: K€158; 2019: K€187). The interest expense for the year ended December 31, 2021 was K€5 (2020: K€7; 2019: K€9).

Material Unused Sources of Liquidity

Our cash and cash equivalents as of December 31, 2021, 2020 and 2019 were € 196.0 million, € 111.5 million and € 128.9 million, respectively. We have no longer undrawn lines of credit at December 31, 2021.

Transfers from Subsidiaries

The amount of dividends payable by our subsidiaries to us is subject to, among other restrictions, general limitations imposed by the corporate laws, capital transfer restrictions and exchange control restrictions of the respective jurisdictions where those subsidiaries are organized and operate. For example, China has very specific approval regulations for all capital transfers to or from the country, certain capital transfers to and from

Table of Contents

Ukraine are subject to obtaining a specific permit and current legislation in Brazil permits the Brazilian government to impose temporary restrictions on remittances of foreign capital abroad in the event of a serious imbalance or an anticipated serious imbalance in Brazil’s balance of payments. Dividends paid to us by certain of our subsidiaries may also be subject to withholding taxes in certain jurisdictions. Of our cash and cash equivalents held outside of Belgium as of December 31, 2021, 2020 and 2019, the amount of cash that would have been subject to withholding taxes if transferred to us by way of dividends and the amount of cash that could not have been transferred by law, or the transfer of which would have been subject to prior approval that was beyond our control, was in each case immaterial.

Contractual Obligations

Our contractual commitments will have an impact on our future liquidity. The table below sets forth our contractual obligations as of December 31, 2021, which represents contractually committed future obligations:


in 000€	Total		Less than 1 year		2-3 years		4-5 years		More than 5 years
Loans and borrowings		90,486		17,849		39,837		18,610		14,190
Lease Liabilities		8,621		3,353		3,426		861		981
Scheduled interest payments (1)		5,384		1,374		2,116		1,061		832
Purchase obligations		7,043		6,723		320		0		0
Total		111,534		29,299		45,699		20,532		16,003

(1)	Scheduled interest payments comprise the interest payable on loans and borrowings and lease commitments. No interest is payable on the other contractual obligations in the above table.

As of December 31, 2021 and 2020, we had no significant purchase commitments related to property, plant & equipment.

C. Research and Development, Patents and Licenses

For information regarding our research and development program, see “Item 4. Information on the Company—B. Business Overview—Research and Development.”

D. Trend Information

Impact of

COVID-19

on our Business

In 2020, the vast majority of the businesses addressed by our segments were adversely affected by the effects of the COVID-19 pandemic, which had a negative impact on our results of our operations. These effects diminished in 2021, although we continued to experience the negative impact from the pandemic in certain business lines that have not yet recovered in full. In particular, during the first half of 2021, order intake levels from automotive, aerospace and certain industrial clients in our Materialise Software and Materialise Manufacturing segments remained below the historical levels pre-pandemic 2019. To date, we have not incurred significant bad debt or major delays in trade payments as a result of the pandemic.

Impact of the armed conflict in Ukraine

As discussed in more detail in “Item 3. Key Information—D. Risk Factors” of this annual report, we have historically maintained an office in Kyiv, employing over 400 collaborators who are mainly engaged in engineering, software development and supporting IT and staff functions. As a result of the armed conflict in Ukraine, our operations from our Kyiv office have come to a standstill.

To-date, most our our personnel from the office in Kyiv have continued to work for us throughout the armed conflict, either remotely from Ukraine or other neighboring countries or from our Wroclaw office, while others remain unable to perform their work. As of the date of this annual report, we have been able to continue servicing our customers without significant disruption or delay, as personnel with similar skills and competencies located elsewhere in the world have increased their roles and responsibilities to assist displaced personnel.

Despite our initiating an intense relocation and support program, it is impossible to predict how much of our Ukrainian workforce will be able or willing to continue working for us. As we are unable to predict how the armed conflict in Ukraine will evolve, we cannot exclude that delays or disruption in certain of our services may occur, which could impact our business and operations, results of operations, financial condition, cash flows and liquidity.

Although the impact of the armed conflict in Ukraine has not had a material adverse effect on our financial results to-date, we have incurred and will continue to incur expenses related to the relocation and support efforts of Ukrainian personnel, and we will be affected by additional operating expenses from hiring additional and more expensive resources outside Ukraine.

It is still uncertain to what extent some of the development projects of our Materialise Software and Materialise Medical segments, and to a lesser extent our Materialise Manufacturing segment, will be impacted. As a result of such impact, some of our anticipated product releases may be delayed, which may adversely affect our revenue.

In addition, although only less than 0.3% of our revenue in 2021 was generated in Russia, we expect that the trade sanctions that have been imposed against Russia by, among others, the United States and the European Union, will have a negative impact on our revenue for the year ended December 31, 2022.

As of the date of this annual report, we are unable to predict how the armed conflict in Ukraine will evolve or what the impact of any political and direct and indirect economic repercussions will be on the global economy and our business. Indirect economic repercussions could, for example, come from continued or further increased inflation, or currencies instability. As a result, we are unable to assess with certainty its impact on our business and operations, results of operations, financial condition, cash flows and liquidity.

E. Critical Accounting Estimates

For information regarding our critical accounting estimates, see “—Operating Results—Critical Accounting Policies and Accounting Estimates” above.

Off-Balance Sheet Arrangements

We do not have any

off-balance

sheet arrangements that have, or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to investors.

Table of Contents

ITEM 6. DIRECTORS,

SENIOR MANAGEMENT AND EMPLOYEES

A. Directors and Senior Management

The following table sets forth certain information with respect to the current members of our board of directors and senior management:


Name	Age		Position
Directors:
Wilfried Vancraen		60		Founder, Director & Chief Executive Officer
Peter Leys		57		Executive Chairman
A Tre C CVOA, represented by Johan De Lille		59		Director
Hilde Ingelaere		60		Director & Executive Vice President
Sander Vancraen		31		Director
Jürgen Ingels		51		Director
Jos Vander Sloten		59		Director
Lieve Verplancke		62		Director
Bart Luyten		45		Director
Volker Hammes		58		Director
Senior Management and Executive Committee Members:
Wilfried Vancraen		60		Founder, Director & Chief Executive Officer
Peter Leys		57		Executive Chairman
Hilde Ingelaere		60		Director & Executive Vice President
Seaquence BV, represented by Johan Pauwels		54		Executive Vice President, Chief Operating Officer
Bart Van der Schueren		55		Executive Vice President, Chief Technology Officer
Alfinco BV, represented by Johan Albrecht		58		Executive Vice President, Chief Financial Officer
De Vet Management BV, represented by Brigitte de Vet-Veithen		51		Vice President, Materialise Medical segment
Level 5 BV, represented by Jurgen Laudus		43		Vice President, Materialise Manufacturing segment
Eduard Crits		63		Chief Information Officer
SoHo services, represented by Conny Hooghe		56		Vice President, Human Resources
Carla Van Steenbergen		46		Vice President, Chief Legal Officer

The term of the directorship of each member of our board of directors will expire at the 2022 annual general meeting of shareholders. The business address of the members of our board of directors is the same as our business address: Technologielaan 15, 3001 Leuven, Belgium. Our board of directors has determined that Jürgen Ingels, Bart Luyten, Volker Hammes, Lieve Verplancke and A Tre C CVOA (represented by Johan De Lille) are independent under Belgian law and the Nasdaq Stock Market listing requirements.

The following is a brief summary of the business experience of the current members of our board of directors:

Wilfried Vancraen

Wilfried Vancraen has served as one of our directors and as our Chief Executive Officer since founding our company in July 1990. Mr. Vancraen previously worked as a research engineer and consultant at the Research Institute of the Belgian Metalworking Industry, where he was introduced to 3D printing. Passionate about this new technology and firm in his belief that it could help create a better and healthier world, he founded Materialise in July 1990. Mr. Vancraen holds several patents related to the technical and medical applications of 3D printing and remains committed to using the technology to make positive changes in people’s lives. In recent years, Mr. Vancraen has been awarded the RTAM/SME Industry Achievement Award, the highest honor in the 3D printing industry, has been selected as the most influential person in additive manufacturing by industry professionals and TCT Magazine, and has been listed one of the five leading players in his sector by the Financial Times. He is also the recipient of a 2013 Visionaries! Award from the Museum of Art and Design in New York. Mr. Vancraen holds a Master of Science in Electro-Mechanical Engineering and a Master in Business Administration from KU Leuven. Wilfried Vancraen was chosen in the TCT Hall of Fame in 2017 for his contributions to the 3D printing industry. In 2018, he was chosen by the Additive Manufacturing Users Group (AMUG) as the Innovators Showcase and received the Industry Dino Award. In 2019, Mr. Vancraen was appointed as a faculty honorary professor at the Faculty of Engineering, KU Leuven on the recommendation of the Department of Mechanical Engineering because of his role as founder and CEO of our company.

Table of Contents

Peter Leys

Peter Leys has served as one of our directors and as our Executive Chairman since 2013. Previously, from 1990 to 2013, Mr. Leys was at the Brussels office of Baker & McKenzie CVBA, where he focused on mergers and acquisitions, and capital markets. Mr. Leys lectures a contract negotiation course at the KU Leuven. Mr. Leys holds a Candidacy Degree in Philosophy from KU Leuven and Master of Law degrees from KU Leuven and the University of Georgia.

Johan De Lille

. Johan De Lille has represented A Tre C CVOA as one of our directors since July 2006, and A Tre C CVOA has been an independent director of Materialise since 2006. Mr. De Lille started his professional career as an auditor at Arthur Andersen LLP in 1988. In 1994, he became Vice President & Group Controller of Ackermans & van Haaren NV, a Belgian public holding company. In 1999, he became Chief Financial Officer of Easdaq/Nasdaq Europe and took on the role of Chief Financial Officer of Option NV, a Belgian public technology company, in 2001. Mr. De Lille joined Delhaize Group, a Belgian public company, as Vice President & Controller in September 2002, and later became Chief Internal Auditor of the Delhaize Group in August 2006, and Chief Financial Officer of Delhaize Belgium in January 2009. Since 2013, Mr. De Lille has acted as Chief Financial & Information Officer of BMT Group, an industrial family owned holding company active in high-precision machining. Mr. De Lille serves as an independent director on the board of directors of Boma NV, a Belgian private company specializing in cleaning products. In 1988, Mr. De Lille was the award winner for the best final paper of the Department of Economics from KU Leuven. In 2010, he received the CFO Magazine Award for the Best Finance Team of the year for Working Capital in Belgium. Mr. De Lille holds a Master’s degree in Economics, with a major in Econometrics and Mathematical Economics, from KU Leuven.

Hilde Ingelaere

co-founded

Materialise in 1990, together with the company’s Chief Executive Officer, Wilfried Vancraen, and has served as one of our directors since 1997. In her early years at Materialise, Ms. Ingelaere managed several staff departments including human resources, finance and legal. Today as the Executive Vice President of Materialise, she plays an important role in strategic negotiations with a focus on partnerships and applications in the medical domain. Prior to joining Materialise, Ms. Ingelaere conducted cardiovascular clinical research at Bristol-Myers Squibb from 1986 to 1989. She then worked as a business analyst with Plant Genetic Systems from 1989 to 1992. Ms. Ingelaere holds a Master’s degree in Bioengineering from KU Leuven, where she focused on Biotechnology, and a Master’s degree in Business Administration from KU Leuven.

Sander Vancraen

Sander Vancraen has served as one of our directors since 2020. Mr. Vancraen holds a Bachelor’s degree in Aerospace Engineering from Delft University of Technology, with a thesis on a GES (Gravity Explorer Satellite), providing data on temporal changes in Earth’s gravity field for scientific use at low cost. He also holds a Master’s degree in Aerospace Engineering, track Space Exploration, fromDelft University of Technology, with a thesis on aCOTS GNSS Receiver, testing of an onboard receiver for the Indian Space Research Organization. In 2013, he did a three month internship at Materialise USA in Plymouth, MI, supporting the clinical engineering team. From 2013 to 2018, he managed a guesthouse, Intermezzo. Since October 2018, he has been a design engineer for the EASA DOA of TUI fly, a charter airline.

Jürgen Ingels

. Jürgen Ingels has served as one of our independent directors since November 2013. Mr. Ingels is Founder and Managing Partner of SmartFin, a growth stage private equity fund that was set up in December 2014. In October 2014, Mr. Ingels sold Clear2Pay NV/S.A., a global innovative payments software technology company he founded in 2000, to FIS Global. The clients of Clear2Pay include global and major regional financial institutions such as ING Group, Banco Santander, S.A., Crédit Agricole S.A., BNP Paribas, The U.S. Federal Reserve, Royal Bank of Scotland, The People’s Bank of China (PBOC). Mr. Ingels started his career in private equity in 1997 at Dexia NV/S.A., where his role was focused on investing in technology companies. Mr. Ingels currently serves as a director on the board of directors for Guardsquare NV, Projective NV, Itineris NV, Willemen Groep, Ghelamco NV, WDP (Euronext), and Recharge.com. In 2018, Mr. Ingels founded

Scale-Ups.eu

and organized Supernova, a

four-day

technology event in Antwerp with over 30.000 visitors.

Mr. Ingels holds a Master’s degree in Business Administration and a Master’s degree in Political and Social Sciences from the University of Antwerp. In 2020 Mr. Ingels published his first book

Start Grow Sell

. In the book he reveals 50 lessons he has learned as an entrepreneur.

Jos Vander Sloten

Jos Vander Sloten has served as one of our directors since January 2007. Mr. Vander Sloten is a full professor at the Faculty of Engineering Science, KU Leuven and chaired the Division of Biomechanics for two terms from 2006 to 2014. He chaired the Leuven Medical Technology Centre

(L-MTC),

which he founded in 2008 until the end of his two terms in 2016. Mr. Vander Sloten teaches engineering mechanics, problem solving and engineering design, computer integrated surgery systems, and medical device design including regulatory affairs. From 2006 to 2012, he served as program director of the Master in Biomedical Engineering at KU Leuven. His research interests are computer applications in musculoskeletal biomechanics and computer integrated surgery, on which he authored more than 160 journal papers. Mr. Vander Sloten is a Founding Fellow of the European Alliance for Medical and Biological Engineering and Science, where he previously served as president in 2006, president-elect in 2005 and secretary-general from 2003 to 2004. In 2015, he was elected as a member of the International Academy for Medical and Biological Engineering. Mr. Vander Sloten holds a Master’s degree in Mechanical Engineering and a PhD in Mechanical Engineering – Biomedical Engineering from KU Leuven. Since 2016, he is Vice-Dean for International Affairs at the Faculty of Engineering Science, KU Leuven.

Lieve Verplancke

. Lieve Verplancke has served as one of our independent directors since June 2015. Ms. Verplancke began her career in 1984 with The Beecham Group (now part of GlaxoSmithKline), and has since held key management positions with Merck & Co., as well as Bristol-Myers Squibb, where she served as Managing Director, leading their Belgian/GDL subsidiary until 2012. Ms. Verplancke has also served as a board member for Brussels-based Europe Hospitals, the Imelda Hospital in Bonheiden, the Euronext fund, Quest for Growth, MDxHealth and the Stichting tegen Kanker. She is also the founder and managing director of Qaly@Beersel, an elderly care center in Belgium. In addition to being a medical doctor (MD – KU Leuven), Ms. Verplancke holds a postgraduate degree in Economics and a Master in Business Administration from the University of Antwerp. She has also completed courses at INSEAD, CEDEP, Columbia University and the Vlerick Business School, and is a certified Executive Coach (PCC).

Table of Contents

Bart Luyten

Bart Luyten has served as one of our independent directors since June 2017 and also previously served as representative of one of our directors from 2012 to 2015. Mr. Luyten is Founder and Managing Partner of SmartFin, a private equity fund platform investing in early- and growth stage technology companies through four investment entities under the SmartFin brand. Previously, Mr. Luyten was the Founder and Managing Director of Sniper Investments NV, a B2B technologies fund that was set up in 2010. Mr. Luyten has experience as Investment Director of Partners At Venture, Managing Partner of Privast Capital Partners and General Partner of Nausicaa Ventures, all Belgian-based private equity and venture capital funds with a focus on B2B technology investments. Mr. Luyten currently holds positions on the boards of directors of a number of European B2B technology companies such as Betty Blocks, Recharge and Eyesee. Mr. Luyten holds a Master of Science degree in Applied Economics from the University of Antwerp and a postgraduate Master degree in SME management from VIZO Brussels.

Volker Hammes.

Volker Hammes, has served as one of our directors since November 2018. Mr. Hammes has served as a Managing Director of BASF New Business GmbH, a subsidiary of BASF SE, the German chemical conglomerate (FWB: BAS), since January 2016 as well as first as Managing Director and then as Chairman of BASF 3D Printing Solutions GmbH, another subsidiary of BASF, since August 2017 and June 2019 respectively. Between 2012 and 2016, Mr. Hammes also served as director or officer of various BASF affiliates, including as Chief Executive Officer and Managing Director, Head of Business Center Turkey, Middle East and North Africa of BASF Turk Kimya San. Ltd. Sti. In addition, Mr. Hammes has served as a director on the board of directors of Essentium Inc. and Evolve Additive Solutions, both providers of industrial 3D printing solutions, since December 2017 and January 2021 respectively. Mr. Hammes holds a Master of Science degree in Mechanical Engineering, Polymer Technology from RWTH Aachen.

Our board of directors has established an Executive Committee. The following is a brief summary of the professional experience of the members of our Executive Committee, which was established effective as of January 1, 2017:

Johan Pauwels

. Johan Pauwels has served as an Executive Vice President of our company since January 2011 and has been with our company since our founding. In 1990, Mr. Pauwels completed his Master’s thesis on stereolithography on the very first 3D printing machine at Materialise. After graduating in 1991, Mr. Pauwels stayed on with our company, focusing on software development to support our 3D printing services. Throughout his career with our company, Mr. Pauwels has held several positions, including Software Sales Manager and Director of Sales, and is currently an Executive Vice President responsible for global sales organization and our sales offices around the world. As of 2021, Mr. Pauwels is also the Chief Operating Officer of our company. Mr. Pauwels holds a Master’s degree in Electro-Mechanical Engineering from KU Leuven.

Bart Van der Schueren

. Bart Van der Schueren has served as an Executive Vice President of our company since January 2011 and as our Chief Technology Officer since 2016. In February 2022, he also assumed the position of Vice President of the Materialise Software segment. Prior to joining Materialise, Mr. Van der Schueren was at KU Leuven as a liaison engineer for the newly founded Materialise and established the basic research activities for the company while also founding the research activities in 3D printing at the KU Leuven. Mr. Van der Schueren then went on to obtain a PhD in selective laser metal sintering. In 1995, Mr. Van der Schueren officially joined Materialise and ran the service bureau. Over the years, his dedication and expertise has grown the service bureau from a regional player to one of the most prominent additive manufacturing facilities in Europe. In 2011, Mr. Van der Schueren became an Executive Vice President of our company, responsible for the Materialise Manufacturing segment and focusing on production and engineering services. Since 2018, Mr. Van der Schueren is globally responsible for the research activities of Materialise, and since 2022, he is also responsible for the activities of the Materialise Software segment. Mr. Van der Schueren holds a PhD in Selective Laser Metal Sintering and a Master’s degree in Mechanical Engineering from KU Leuven.

Johan Albrecht

. Johan Albrecht has represented Alfinco BV as our Chief Financial Officer since August 2015. Mr. Albrecht joined Materialise from BARC NV, a global central laboratory that supports the pharmaceutical and biotech industry in the development of new drugs, where he served as Chief Financial Officer between 1989 and 2015, with responsibility for its worldwide financial and business reporting and control systems. Mr. Albrecht was also a member of BARC NV’s executive committee and a director in its subsidiaries in Belgium, the United States, China, Australia, Singapore and South Africa. After Cerba European Lab, a network of 200 laboratories, acquired BARC NV in 2007, Mr. Albrecht also joined Cerba European Lab’s executive committee in 2011. Prior to joining BARC NV, Mr. Albrecht served in various financial capacities with Pizzaland Benelux (United Biscuits), Applied Data Research and Minit International. Mr. Albrecht holds a postgraduate degree in corporate finance from KU Leuven and a Bachelor of Science in Business Administration from HU Brussels University

Brigitte de

Vet-Veithen

. Brigitte de

Vet-Veithen

has represented De Vet Management BV as Vice President Medical since June 2016. Mrs. de

Vet-Veithen

has more than 20 years of experience in the Healthcare and Life Sciences Sector. She has worked in various management roles for Johnson & Johnson, ultimately serving as Vice President for the EMEA region of Cordis Neurovascular and General Manager of Cordis in Germany. Before joining Materialise she has held various leadership roles as representative of De Vet Management BV including the role of Chief Executive Officer of Acertys group, a provider of medical devices, software, services and supplies to hospitals and medical professionals. Mrs. de

Vet-Veithen

holds a Master of Business Administration with a Major in Engineering from HEC Liege and an MBA from INSEAD.

Jurgen Laudus

. Jurgen Laudus serves as Vice-President of our Materialise Manufacturing segment. Mr. Laudus joined us in August 2001 as project manager and continued to our U.K. office to become Rapid Tooling manager in 2003. For two years, Mr. Laudus was responsible for both our Rapid Tooling sales support and production management. In 2005, Mr. Laudus returned to Belgium to become international production manager for our additive manufacturing services and later on sales manager, playing an active role in the growth of the additive manufacturing production activities of Materialise. Mr. Laudus holds a Master of Science degree in Engineering from the KU Leuven.

Eddy Crits.

Eduard (Eddy) Crits has served as our Chief Information Officer since August 2018. For the past 30 years of his career, Mr. Crits held managerial and executive positions in ICT, Product Development, Operations and Engineering in global technological companies such as Agfa, IPTE and IBA. Mr. Crits holds a PhD degree in Physics from KU Leuven and an Executive MBA degree from the University of Antwerp.

Table of Contents

Conny Hooghe.

Conny Hooghe represented SoHo Services as our Global HR Director since September 2017. She holds a Master of Industrial Psychology from the University of Ghent. Previously she has held several human resources management positions within technological oriented or IT companies like Wolters Kluwer, Fujitsu Services and Atos Origin.

Carla Van Steenbergen.

Carla Van Steenbergen has served as our

in-house

counsel since 2003, and her role has gradually evolved into our Chief Legal Officer. Ms. Van Steenbergen has served as our Compliance Officer since June 2014, and is a member of our Executive Committee in addition to being secretary to the board of directors. Ms. Van Steenbergen graduated from the law faculty of KU Leuven in 1999. After having worked for three years at Brussels’ based law firm Marx Van Ranst Vermeersch & Partners, she temporarily moved to London to earn a LLM degree at King’s College London. Upon her return to Belgium, she started working as

in-house

legal counsel for our company, a position which she holds to this day. Over the years, our legal department has expanded, changing Ms. Van Steenbergen’s role from the sole company lawyer to that of a legal team manager.

Family Relationships

Wilfried Vancraen and Hilde Ingelaere are spouses. Sander Vancraen is the son of Wilfried Vancraen and Hilde Ingelaere. No other family relationship exists between any members of our board of directors or senior management.

Board Diversity Disclosure

In accordance with Nasdaq Listing Rule 5606, each company must disclose annually information on each director’s voluntary self-identified characteristics. The table below includes information on the diversity of our board of directors based upon information voluntarily provided by each director.

Board Diversity Matrix

Country of Principal Executive Offices:

Belgium

Foreign Private Issuer

Yes

Disclosure Prohibited under Home Country Law

Total Number of Directors

Female

Male

Non-

Binary

Did Not
Disclose
Gender

Part I: Gender Identity

Directors

Part II: Demographic Background

Underrepresented Individual in Home Country Jurisdiction

LGBTQ+

Did Not Disclose Demographic Background

Table of Contents

B. Compensation

Compensation of Directors

Our Remuneration and Nomination Committee recommends the level of remuneration for directors. These recommendations are subject to approval by our board of directors and, subsequently, by our shareholders at the annual general meeting. During the year ended December 31, 2021, only the directorships of Mr. Wilfried Vancraen, Mr. Leys, Ms. Ingelaere, Mr. De Lille, Mr. Vander Sloten, Mr. Ingels, Mr. Luyten, Ms. Verplancke and Mr. Hammes were remunerated. See “—Compensation of Senior Management and Executive Committee” below for more information about the remuneration of the directorships of Mr. Wilfried Vancraen, Mr. Leys and Ms. Ingelaere. During the year ended December 31, 2021, Mr. De Lille, Mr. Vander Sloten, Mr. Ingels, Mr. Luyten, Ms. Verplancke and Mr. Hammes each received annual remuneration equal to € 10,000. In addition, Mr. De Lille, Mr. Vander Sloten, Mr. Ingels, Mr. Luyten, Ms. Verplancke and Mr. Hammes each received a remuneration of € 1,250 per physical board meeting that he or she attended and € 625 for each board meeting held via conference call (lasting more than one hour) that he or she attended.

In addition, the Chairman of the Audit Committee received an annual remuneration of € 7,500. Each independent member (including the Chairman) of the Audit Committee or the Remuneration and Nomination Committee received a remuneration of € 1,250 for each physical committee meeting that he or she attended, and € 625 for each committee meeting held via conference call (lasting more than one hour) and that he or she attended. The Remuneration and Nomination Committee benchmarks directors’ compensation against peer companies to ensure that it is competitive. In addition, our board of directors sets and revises, from time to time, the rules and level of compensation for directors carrying out a special mandate or sitting on one or more of the board of directors committees and the rules for reimbursement of directors’ business-related

out-of-pocket

expenses.

Compensation of Senior Management and Executive Committee

In 2021, the aggregate total gross compensation of our senior management amounted to € 2.9 million, which included base salary, bonus payments, company car allowance and other benefits. This amount also includes the remuneration of the directorships of Mr. Wilfried Vancraen, Mr. Leys and Ms. Ingelaere and the compensation for the members of the Executive Committee.

We have entered into services agreements (Contracts for Paid Office as a member of the Executive Committee) with each member of our Executive Committee. The terms of these agreements are substantially similar. These agreements generally provide for an annual base salary. In addition to the fixed remuneration components, under the terms of these agreements, members of our Executive Committee are entitled to certain additional benefits (including mobile phone and director and officer liability insurance) and reimbursement of necessary and reasonable expenses. These services agreements with members of our Executive Committee provide for payments and benefits (including upon termination of employment) that we believe are in line with customary market practice for similar companies who are operating in our industry.

Table of Contents

C. Board Practices

Service Contracts

Except as described above under “—B. Compensation—Compensation of Senior Management and Executive Committee,” we do not have service contracts with any member of our board of directors or Executive Committee.

Board of Directors Practices

Decisions are generally made by our board of directors as a whole. However, decisions on certain matters may be delegated to committees of our board of directors or to the Executive Committee to the extent permitted by law and our restated articles of association. The chairperson, or if he or she is prevented from doing so, the vice chairperson, chairs the meetings of our board of directors.

Our board of directors transferred management powers to the Executive Committee, except for the general policy of the company and other powers which are reserved by Belgian company law to the board of directors. The Executive Committee is supervised by our board of directors. The following actions are comprised under general policy of our company and are thus excluded from the powers of the Executive Committee:

•

mergers and acquisitions;

•

transfer and waive of intellectual property rights to third parties;

•

granting of exclusivity rights to third parties with an important impact on the freedom of a particular business segment;

•

nomination and removal of members of the Executive Committee;

•

opening of offices abroad and nomination and removal of managers thereof;

•

conclusion of financial loans;

•

sale and purchase of real estate; and

•

cancellation of a particular product line.

Our board of directors entrusted the daily management of the company to Wilfried Vancraen, our Chief Executive Officer, in conformity with article 7:121of the Belgian Companies and Associations Code.

Pursuant to our restated articles of association, our board of directors may form committees from among its members and charge them with the performance of specific tasks. The committees’ tasks, authorizations and processes are determined by our board of directors. Where permissible by law and our restated articles of association, important powers of our board of directors may also be transferred to committees.

Audit Committee

The Audit Committee consists of three members: Johan De Lille (Chairman), Bart Luyten and Jürgen Ingels. Our board of directors has determined that Messrs. De Lille, Luyten and Ingels are independent under Rule

10A-3

of the Exchange Act and the applicable rules of the Nasdaq Stock Market and that each of Messrs. De Lille, Luyten and Ingels qualifies as an “audit committee financial expert” as defined under the Exchange Act.

Our Audit Committee assists our board of directors in overseeing the accuracy and integrity of our accounting and financial reporting processes and audits of our consolidated financial statements, the implementation and effectiveness of an internal control system and our compliance with legal and regulatory requirements, the independent auditors’ qualifications and independence and the performance of the independent auditors.

The Audit Committee’s duties and responsibilities to carry out its purposes include, among others:

•

the review of our accounting processes;

•

the review of the effectiveness of our internal systems of control, risk management and compliance;

•

the consideration and recommendation of the nomination, compensation, retention and termination of the Company’s statutory auditor for Belgian company law purposes and the Company’s independent auditor for SEC purposes, the commissioning of the auditors to conduct audits, agreeing on additional services to be provided by the auditors under their respective engagements, the establishment of the scope and the main review points of the audit and oversight of the auditors’ work (including resolution of disagreements with the auditors);

Table of Contents

•

the preparation of our board of directors’ resolution on our consolidated financial statements;

•

reviewing our interim consolidated financial statements that are made public or otherwise filed with any securities regulatory authority;

•

discussing any flaws relating to our internal control systems, as reported by our board of directors to the audit committee;

•

monitoring our bookkeeping and records; and

•

the establishment of procedures for (i) the receipt, retention and treatment of complaints we receive regarding accounting, internal accounting controls or auditing matters and (ii) the confidential, anonymous submission by our employees of concerns regarding questionable accounting or auditing matters.

Our Audit Committee is entitled to review information on any point it wishes to verify, and is authorized to acquire such information from any of our employees. It is also authorized to obtain independent advice, including legal advice, if this is necessary for an inquiry into any matter under its responsibility. It is entitled to call on the resources that would be needed for this task. It is entitled to receive reports directly from the auditors, including reports with recommendations on how to improve our control processes.

Remuneration and Nomination Committee

Our Remuneration and Nomination Committee consists of three members: Wilfried Vancraen, Jozef Vander Sloten and Lieve Verpancke. Our board of directors has determined that Ms. Verplancke is independent under the applicable rules of the Nasdaq Stock Market.

Our Remuneration and Nomination Committee assists our board of directors in its decisions relating to the remuneration policy and individual remuneration packages for our board of directors, the appointment of directors, the Chief Executive Officer and the other members of senior management.

The Remuneration and Nomination Committee’s duties and responsibilities to carry out its purposes include, among others:

•

identifying individuals qualified to become members of our board of directors, consistent with criteria approved by our board of directors;

•

recommending to our board of directors the director nominees for each annual general meeting, taking into account any nomination rights that certain shareholders may have under our restated articles of association;

•

recommending to our board of directors director nominees to fill vacancies;

•

recommending to our board of directors qualified and experienced directors for service on the committees of the board of directors;

•

recommending to our board of directors the compensation of the members of senior management;

•

recommending to our board of directors any incentive compensation plans and equity-based plans, and awards thereunder, and profit-sharing plans for our employees;

•

evaluating the performance of our Chief Executive Officer; and

•

advising our board of directors on other compensation issues.

Table of Contents

D. Employees

The table below sets out information about the number of FTEs and fully dedicated consultants, which consultants included individual professionals who are registered as private entrepreneurs in Ukraine and who work exclusively with our company. FTEs who are a part of one or more of our three core competencies are allocated to one of our segments and therefore included in our segment reporting.


	At December 31,
	2021		2020		2019
Total		2,332		2,163		2,177
Segments:
Materialise Software		281		285		303
Materialise Medical		861		738		763
Materialise Manufacturing		752		760		775
Additional staff		438		380		336

We currently do not have a workers’ council or trade union delegation. We have a health and safety committee entitled to certain information and consultation rights under Belgian law, at our Belgian headquarters. We consider our employee relations to be good and have never experienced a work stoppage.

E. Share Ownership

The following table sets forth information relating to beneficial ownership of our ordinary shares, as of April 22, 2022, for each member of our board of directors and senior management as of April 22, 2022:


	Ordinary Shares Beneficially Owned as of April 22, 2022
Name of beneficial owner (1)	Number (2)		Percent (2)
Wilfried Vancraen (3)		32,251,036		54.6
Peter Leys (4)		320,459		*
A Tre C CVOA, represented by Johan De Lille (5)		—		—
Sander Vancraen		—		—
Jürgen Ingels		—		—
Jos Vander Sloten		12,000		*
Lieve Verplancke		—		—
Hilde Ingelaere (3)		32,251,036		54.6
Bart Luyten		—		—
Volker Hammes		—		—
Johan Pauwels (6)		150,545		*
Bart Van der Schueren (7)		143,346		*
Johan Albrecht (8)		10,545		—
Jurgen Laudus (9)		45,145		*
Carla Van Steenbergen (10)		28,635		*
Brigitte de Vet-Veithen (11)		27,793		*
Conny Hooghe		—		—
Eddy Crits		—		—

Table of Contents

*	Less than 1%

(1)	Except as otherwise indicated, the address for each of the persons named above is Technologielaan 15, 3001 Leuven, Belgium.

(2)

Beneficial ownership is determined in accordance with the rules and regulations of the SEC. In computing the number of shares beneficially owned by a person and the percentage ownership of that person, we have included shares that the person has the right to acquire within 60 days of April 22, 2022, including through the exercise of any option, warrant or other right or the conversion of any other security. These shares, however, are not included in the computation of the percentage ownership of any other person. Except as otherwise indicated, we believe the persons named in this table have sole voting and investment power with respect to all ordinary shares shown as beneficially owned by them, subject to community property laws where applicable and to the information contained in the footnotes to this table.

(3)

Consists of (i) 110,545 ordinary shares and 27,135 ADSs held by Mr. Vancraen, (ii) 110,545 ordinary shares and 27,135 ADSs held by Ms. Ingelaere and (iii) 30,858,964 ordinary shares and 1,116,712 ADSs jointly held by Mr. Vancraen and Ms. Ingelaere through Idem, a partnership (

maatschap

) that is controlled and managed by Mr. Vancraen and Ms. Ingelaere.

(4)

Consists of (i) 7,040 ADSs held by Peter Leys, 4,215 ADSs held by Els Kindt (the spouse of Peter Leys), 22,862 ADS held by Riverside, a partnership (

maatschap

) that is controlled and managed by Mr. Leys and Ms. Kindt and 75,000 ADSs held by Mountain View, a partnership that is controlled and managed by Mr. Leys and Ms. Kindt and (ii) 6,000 ordinary shares held by Peter Leys, 103,561 ordinary shares held by Els Kindt and 101,781 ordinary shares held by Mountain View.

(5)	The address for A Tre C CVOA is Timmermansstraat 32, 8340 Damme, Belgium.

(6)	Consists of (i) 40,000 ordinary shares and 10,545 ADSs held jointly with Mr. Pauwels’ spouse Kristine Van Muylder, and (ii) 100,000 ordinary shares jointly held by Mr. Pauwels and Ms. Van Muylder through Sorelle, a partnership that is controlled and managed by Mr. Pauwels and Ms. Van Muylder.

(7)	Consists of (i) 124,552 ordinary shares held by Mr. Van der Schueren and (ii) 18,794 ADSs held by Mr. Van der Schueren.

(8)

Consists of 10,545 ADSs held by Mr. Albrecht. Does not include 4,545 warrants issued and granted to Mr. Albrecht under the 2014 Warrant Plan, which warrants are exercisable for 4,545 ordinary shares at €8.81 per share, vest 25% on a yearly basis beginning in October 2018 and expire in 2024 (with the percentage vesting on each applicable vesting date calculated as a percentage of the total number of warrants initially granted).

Table of Contents

(9)	Consists of 45,145 ADSs held by Mr. Laudus.

(10)	Consists of 10,545 ordinary shares and 18,090 ADSs held by Ms. Van Steenbergen.

(11)	Consists of 18,000 ordinary shares and 9,793 ADSs held by Ms. de Vet-Veithen.

Table of Contents

ITEM 7.

MAJOR SHAREHOLDERS AND RELATED PARTY TRANSACTIONS

A. Major Shareholders

The following table sets forth information relating to beneficial ownership of our ordinary shares, as of April 22, 2022, for each person who is known by us to own beneficially 5% or more of our outstanding ordinary shares:


	Ordinary Shares Beneficially Owned as of April 22, 2022
Name of Beneficial Owner (1)	Number (2)		Percent (2)
Wilfried Vancraen (3)		32,251,036		54.6
Hilde Ingelaere (3)		32,251,036		54.6
ARK Investment Management LLC (4)		6,128,880		11.31

(1)	Except as otherwise indicated, the address for each of the persons named above is Technologielaan 15, 3001 Leuven, Belgium.

(2)

(3)

maatschap

) that is controlled and managed by Mr. Vancraen and Ms. Ingelaere.

(4)

Based on a Schedule 13G/A filed with the SEC on February 9, 2022 by ARK Investment Management LLC (“ARK”). ARK is an investment advisor and in the Schedule 13G/A filed by ARK it is reported that ARK has (a) sole voting power with respect to 5,807,312 ADSs; (b) shared voting with respect to 116,023 ADSs; and (c) sole dispositive power with respect to 6,128,880 ADSs.

None of our shareholders have different voting rights from other shareholders, except that as long as the Family Shareholders control, directly or indirectly, in the aggregate at least 20% of the voting rights attached to our ordinary shares, a majority of our directors must be appointed by our shareholders from a list of candidates proposed by the Family Shareholders. We are not aware of any arrangement that may, at a subsequent date, result in a change of control of our company.

As of February 1, 2022, there were 43 individual holders of record entered in our share register. The number of individual holders of record is based exclusively upon our share register and does not address whether a share or shares may be held by the holder of record on behalf of more than one person or institution who may be deemed to be the beneficial owner of a share or shares in our company. As of February 1, 2022, 53,68% of our outstanding ordinary shares were held in Belgium by 42 holders of record. As of February 1, 2022, assuming that all of our ordinary shares represented by ADSs are held by residents of the United States, approximately 46,32% of our outstanding ordinary shares were held in the

Table of Contents

United States by one holder of record, the Bank of New York Mellon, depositary of the ADSs. At such date, there were outstanding 27.360.625 ADSs, each representing one of our ordinary shares, and in the aggregate representing approximately 46,32% of our outstanding ordinary shares. The actual number of holders is greater than these numbers of record holders, and includes beneficial owners whose ADSs are held in street name by brokers and other nominees. This number of holders of record also does not include holder whose shares may be held in trust by other entities.

B. Related Party Transactions

Since January 1, 2021, there has not been, nor is there currently proposed, any material transaction or series of similar material transactions to which we were or are a party in which any of the members of our board of directors or senior management, holders of more than 10% of any class of our voting securities, or any member of the immediate family of any of the foregoing persons, had or will have a direct or indirect material interest, other than the compensation and shareholding arrangements we describe in “Item 6. Directors, Senior Management and Employees” and “—A. Major Shareholders,” and the transactions we describe below.

Lunebeke NV

In the past, Ailanthus NV, which was a shareholder of our company up until it was merged into our company (which we refer to as the “Merger”) and which was owned and controlled by Mr. Vancraen and Ms. Ingelaere, had provided several loans and financial leases to us for the purchase of machinery and a portion of our office and production buildings.

Ailanthus NV had granted us a loan at a fixed interest rate of 4.23% that matures in 2025. The purpose of the loan was to finance the purchase of a building in France. Prior to the Merger, Ailanthus NV was demerged into Lunebeke NV, a newly incorporated company. All of Ailanthus NV’s assets and liabilities were transferred to Lunebeke NV, with the exception of (i) the ordinary shares of our company held by Ailanthus NV and (ii) the corresponding accounting equity components. As such, the loan granted by Ailanthus NV was also transferred from Ailanthus NV to Lunebeke NV. For additional information about the loan, see Note 15 to our audited consolidated financial statements.

We used to rent apartments on a regular basis from Ailanthus NV in order to host our employees from foreign subsidiaries who were visiting our headquarters in Leuven. The total amount owed to Ailanthus NV for rent in 2021 was approximately €37k. This activity was also transferred from Ailanthus NV to Lunebeke NV as a result of Ailanthus’s demerger.

Indemnification Agreement

In connection with and prior to the Merger, we entered into an indemnification agreement with Ailanthus NV and with Wilfried Vancraen, Hilde Ingelaere and Lunebeke NV (which we refer to collectively as the “indemnifying parties”). Pursuant to the indemnification agreement, among other things, the indemnifying parties agreed to reimburse us for: (i) costs incurred by us in connection with the Merger, (ii) possible liabilities of our company as a result of the Merger, and (iii) possible negative tax consequences, if any, for certain of our shareholders. The obligation to reimburse our shareholders applies to shareholders who were shareholders prior to April 30, 2021 (which we refer to as “qualifying shareholders”).

The term of the indemnification agreement expires on December 31, 2030. However, we and any qualifying shareholders have the right to make claims against the indemnifying parties for a period of 10 years following the occurrence giving rise to the claim.

Registration Rights Agreement

On September 15, 2016, we entered into a registration rights agreement with certain holders of our ordinary shares, warrants and convertible bonds, including certain of our directors, senior management and consultants, which we refer to as the Registration Rights Agreement. In accordance with the terms of the Registration Rights Agreement, we filed a shelf registration statement on Form

F-3

registering certain ordinary shares represented by ADSs to be sold by the selling shareholders from time to time. These ordinary shares consisted of ordinary shares previously issued to and ordinary shares issuable upon exercise of warrants or conversion of convertible bonds held by the selling shareholders, as well as ordinary shares underlying ADSs that were acquired by the selling shareholders on the Nasdaq Global Select Market.

Letter Agreement Regarding Shares Issuance and Registration Rights

In connection with the Merger, we entered into a letter agreement, dated December 31, 2020, with Wilfried Vancraen and Hilde Ingelaere pursuant to which, among other things, we granted certain demand and “piggyback” registration rights to Wilfried Vancraen and Hilde Ingelaere in respect of the new ordinary shares that were issued to them in connection with the Merger.

C. Interests of Experts and Counsel

Not applicable.

Table of Contents

ITEM 8.

FINANCIAL INFORMATION

A. Consolidated Financial Statements and Other Information

See “Item 3.A. Key Information— A. Selected Financial Data” and “Item 18. Financial Statements.”

Legal or Arbitration Proceedings

From time to time, we may be subject to various claims or legal or arbitration proceedings that arise in the ordinary course of our business.

On September 21, 2021, the Brussels Court of Appeal issued a judgment regarding the termination of a supply agreement that we entered into with Dentsply Implants NV in 2010. In its judgment, the Court of Appeal overruled the judgment issued by the court of first instance (which had previously ruled in favor of Dentsply Implants NV), and fixed the amount of the financial compensation to Dentsply Implants NV at an amount, which, increased with legal interests and costs, resulted in a total amount payable by us to Dentsply Implants NV of € 866,909,74. This judgment of the Brussels Court of Appeal is final, and payment was made on November 25, 2021.

On November 15, 2021, we received a written notice from counsel for Zimmer Biomet, informing us of Zimmer Biomet’s decision to file a request for arbitration with the Belgian Centre for Arbitration and Mediation. Zimmer Biomet believes that we have a contractual obligation pursuant to the terms of our collaboration to indemnify Zimmer Biomet for the expenses it incurred as a result of its settlement with Conformis, Inc. of a patent dispute. We believe there are meritorious defenses to Zimmer Biomet’s claim and intend to contest it vigorously. However, an adverse resolution of this arbitration could have an adverse effect on our results of operations, financial condition or cash flows in the period in which the arbitration is resolved. No amounts have been accrued for this loss contingency.

Other than the litigation described above, we are currently not a party to any other legal or arbitration proceedings, which, in the opinion of our management, is likely to have or could reasonably possibly have a material adverse effect on our business, financial condition or results of operations.

Policy on Dividend Distribution

We have never declared or paid any cash dividends on our shares, and we have no present intention of declaring or paying any dividends in the foreseeable future. Any recommendation by our board of directors to pay dividends, subject to compliance with applicable law and any contractual provisions that restrict or limit our ability to pay dividends, including under agreements for indebtedness that we may incur, will depend on many factors, including our financial condition, results of operations, legal requirements, capital requirements, business prospects and other factors that our board of directors deems relevant.

All of the shares represented by the ADSs have the same dividend rights as all of our other outstanding shares. In general, distributions of dividends proposed by our board of directors require the approval of our shareholders at a shareholders’ meeting, although our board of directors may declare interim dividends without shareholder approval.

Furthermore, pursuant to Belgian law, the calculation of amounts available for distribution to shareholders, as dividends or otherwise, must be determined on the basis of our

non-consolidated

statutory Belgian GAAP financial statements. In addition, in accordance with Belgian law and our restated articles of association, we must allocate each year an amount of at least 5% of our annual net profit under our statutory

non-consolidated

accounts (prepared in accordance with Belgian GAAP) to a legal reserve until the reserve equals 10% of our share capital. As a consequence of these facts there can be no assurance as to whether dividends or other distributions will be paid out in the future or, if they are paid, their amount.

For information regarding the Belgian withholding tax applicable to dividends and related U.S. reimbursement procedures, see “Item 10. Additional Information—E. Taxation—Belgian Taxation.”

B. Significant Changes

None.

Table of Contents

ITEM 9.

THE OFFER AND LISTING

A. Offer and Listing Details

Price History

The ADSs, each representing one ordinary share, have been listed on the Nasdaq Global Select Market under the symbol “MTLS” since June 25, 2014. Prior to that date, there was no public trading market for ADSs or our ordinary shares.

B. Plan of Distribution

Not applicable.

C. Markets

The ADSs have been listed on the Nasdaq Global Select Market under the symbol “MTLS” since June 25, 2014.

D. Selling Shareholders

Not applicable.

E. Dilution

Not applicable.

F. Expenses of the Issue

Not applicable.

Table of Contents

ITEM 10. ADDITIONAL INFORMATION

A. Share Capital

Not applicable.

B. Memorandum and Articles of Association

The information called for by this item was previously reported in Exhibit 2.3 (Description of Securities) to our Annual Report on Form

20-F

for the year ended December 31, 2020, which exhibit is incorporated herein by reference, and is supplemented by the following additional information related to changes in our share capital. The share capital of Materialise NV was increased following the exercise of warrants previously issued under our 2007 Warrant Plan on November 27, 2014, with € 4,336.77 (excluding an issuance premium of € 69,359.23) against the issuance of 75,200 new ordinary shares.

On March 5, 2015, the board of directors increased the share capital of Materialise NV by €4,626.50 (excluding an issuance premium of € 574,290.50) against the issuance of 80,182 new ordinary shares.

The share capital of Materialise NV was increased following the exercise of warrants previously issued under our 2007 Warrant Plan on November 20, 2015, with € 5,647.15 (excluding an issuance premium of € 90,392.85) against the issuance of 98,000 new ordinary shares. The 2007 Warrant Plan 2007 is now terminated. There are no outstanding warrants issued under this plan.

On December 18, 2015, the board of directors adopted a new Warrant Plan, our 2015 Warrant Plan, and issued 1,400,000 warrants, which warrants are exercisable for 1,400,000 new ordinary shares. As of December 31, 2020, 352,000 of the warrants were granted.

On March 30, 2018, the board of directors increased the share capital of Materialise NV by € 5,931.68 (excluding an issuance premium of € 201,331.37) against the issuance of 102,856 new ordinary shares.

On July 19, 2018, the board of directors increased the share capital of Materialise NV by € 112,636.20 (excluding an issuance premium of € 21,418,670.32) against the issuance of 1,953,125 new ordinary shares.

On July 18, 2018, the board of directors decided to increase the share capital of Materialise NV, which capital increase was confirmed on July 26 and July 27, 2018, by € 173,009.19 (excluding an issuance premium of € 33,188,838.54) and € 25,951.38 (excluding an issuance premium of € 4,967,220.35), respectively, against the issuance of 3,000,000 and 450,000 new ordinary shares, respectively.

On December 28, 2018, the board of directors increased the share capital of Materialise NV following the exercise of warrants previously issued under the 2013 Warrant Plan and the 2014 Warrant Plan by € 1,102.07 (excluding an issuance premium of € 39,676.43) and € 2,321.96 (excluding share premium of € 352,210.06), respectively, against the issuance of 19,100 and 40,242 new ordinary shares, respectively.

On November 29, 2019, the board of directors increased the share capital of Materialise NV following the exercise of warrants previously issued under the 2013 Warrant Plan and the 2014 Warrant Plan by € 10,274.68 (excluding an issuance premium of € 345,325.58) and € 5,973.90 (excluding an issuance premium of € 906,636.38), respectively, against the issuance of 178,164 and 103,588 new ordinary shares, respectively.

On April 16, 2020, the board of directors increased the share capital of Materialise NV following the exercise of warrants previously issued under the 2015 Warrant Plan by € 1,254.32 (excluding an issuance premium of € 139,033.18) against the issuance of 21,750 new ordinary shares.

On October 9, 2020, the board of directors increased the share capital of Materialise NV following the conversion of the convertible bonds held by Peter Leys and his spouse by € 1,000,000 against the issuance of 508,904 new ordinary shares.

On November 13, 2020, the board of directors increased the share capital of Materialise NV following the exercise of warrants previously issued under the 2013 Warrant Plan, the 2014 Warrant Plan and the 2015 Warrant Plan by € 2,180.98 (excluding an issuance premium of 231,347.86), € 15,212.54 (excluding an issuance premium of € 1,757,042.30) and € 11,324.48 (excluding an issuance premium of € 954,563.02) against the issuance of 115,176, 201,164 and 149,750 new ordinary shares, respectively.

On December 31, 2020, in the context of the merger between Materialise NV and Ailanthus NV, the extraordinary general meeting of shareholders decided to increase the share capital of Materialise NV and in the same notarial deed of the same date, decided to decrease the share capital of Materialise NV by the same amount. As a result, the share capital of Materialise NV did not change as a result of the aforementioned merger.

On May 5, 2021, the board of directors increased the share capital of Materialise NV following the exercise of warrants previously issued under the 2015 Warrant Plan by € 102,09 (excluding an issuance premium of € 8.605,41) against the issuance of 1.350 new ordinary shares.

On June 9, 2021, the board of directors decided to increase the share capital of Materialise NV, which capital increase was confirmed on June 14, 2021 and July 6, 2021, by € 320.000,00 (excluding an issuance premium of € 78.484.793,95) and € 48.000,00 (excluding an issuance premium of € 11.772.719,09), respectively, against the issuance of 4,000,000 and 600,000 new ordinary shares, respectively.

On November 23, 2021, the board of directors increased the share capital of Materialise NV following the exercise of warrants previously issued under the 2014 Warrant Plan and the 2015 Warrant Plan by € 13.655,81 (excluding an issuance premium of 1.570.065,03) and € 8.595,46 (excluding an issuance premium of € 721.222,04) against the issuance of 179.764 and 113.150 new ordinary shares, respectively.

Table of Contents

C. Material Contracts

We have not entered into any material contracts in the prior two years other than in the ordinary course of business and other than those described elsewhere in this annual report, including under “—B. Memorandum and Articles of Association,” “Item 7. Major Shareholders and Related Party Transactions—B. Related Party Transactions.”

D. Exchange Controls

There are no Belgian exchange control regulations that impose limitations on our ability to make, or the amount of, cash payments to residents of the United States. See “Item 5. Operating and Financial Review and Prospects—B. Liquidity and Capital Resources—Transfers from Subsidiaries” for a discussion of various restrictions applicable to transfers of funds by our subsidiaries.

E. Taxation

Belgian Taxation

The following paragraphs are a summary of material Belgian tax consequences of the ownership of ADSs by an investor. The summary is based on laws, treaties and regulatory interpretations in effect in Belgium on the date of this document, all of which are subject to change, including changes that could have retroactive effect.

The summary only discusses Belgian tax aspects which are relevant to U.S. holders of ADSs (“Holders”). This summary does not address Belgian tax aspects which are relevant to persons who are residents in Belgium or engaged in a trade or business in Belgium through a permanent establishment or a fixed base in Belgium. This summary does not purport to be a description of all of the tax consequences of the ownership of ADSs, and does not take into account the specific circumstances of any particular investor, some of which may be subject to special rules, or the tax laws of any country other than Belgium. This summary does not describe the tax treatment of investors that are subject to special rules, such as banks, insurance companies, collective investment undertakings, dealers in securities or currencies, persons that hold, or will hold, ADSs in a position in a straddle, share-repurchase transaction, conversion transactions, synthetic security or other integrated financial transactions. Investors should consult their own advisers regarding the tax consequences of an investment in ADSs in the light of their particular circumstances, including the effect of any state, local or other national laws, treaties and regulatory interpretation thereof.

In addition to the assumptions mentioned above, it is also assumed in this discussion that for purposes of the domestic Belgian tax legislation, the owners of ADSs will be treated as the owners of the ordinary shares represented by such ADSs. However, the assumption has not been confirmed by or verified with the Belgian Tax Administration.

For the purposes of this summary, ADSs or ordinary shares means ordinary shares represented by ADSs. Both terms are used interchangeably.

Dividend Withholding Tax

As a general rule, a withholding tax of 30% is levied on the gross amount of dividends paid on or attributed to the ordinary shares represented by the ADSs, subject to such relief as may be available under applicable domestic or tax treaty provisions. Dividends subject to the dividend withholding tax include all benefits attributed to the ordinary shares represented by the ADSs, irrespective of their form. A reimbursement of fiscal capital made in accordance with the Belgian Code of Companies and Associations is partly considered to be a distribution of the existing taxed reserves (irrespective whether incorporated into the capital or not) and/or the

tax-free

reserves incorporated into the capital. The proportion is determined on the basis of the ratio between certain taxed reserves and

tax-free

reserves incorporated into the capital on the one hand and, on the other hand, the aggregate of such reserves and the fiscal capital. In principle, fiscal capital includes

paid-up

statutory share capital, and subject to certain conditions, the

paid-up

issue premiums and the cash amounts subscribed to at the time of the issue of profit sharing certificates.

In case of a redemption by us of own shares represented by ADSs, the redemption distribution (after deduction of the portion of fiscal capital represented by the redeemed shares) will be treated as a dividend which in certain circumstances may be subject to a withholding tax of 30%, subject to such relief as may be available under applicable domestic or tax treaty provisions. In case of a liquidation of our Company, any amounts distributed in excess of the fiscal capital will be subject to a 30% withholding tax, subject to such relief as may be available under applicable domestic or tax treaty provisions.

For

non-residents,

the dividend withholding tax will be the only tax on dividends in Belgium, unless the

non-resident

holds ADSs in connection with a business conducted in Belgium, through a fixed base in Belgium or a Belgian permanent establishment.

Relief of Belgian Dividend Withholding Tax

Under the Belgium-United States Tax Treaty (the “Treaty”), there is a reduced Belgian withholding tax rate of 15% on dividends paid by us to a U.S. resident which beneficially owns the dividends and is entitled to claim the benefits of the Treaty under the limitation of benefits article included in the Treaty, (a “Qualifying Holder”). If such Qualifying Holder is a company that owns directly at least 10% of our voting stock, the Belgian withholding tax rate is further reduced to 5%. No withholding tax is however applicable if the Qualifying Holder, is: (i) a company that is a

Table of Contents

resident of the United States that has owned directly ADSs representing at least 10% of our capital for a

12-month

period ending on the date the dividend is declared, or (ii) a pension fund that is a resident of the United States, provided that such dividends are not derived from the carrying on of a business by the pension fund or through an associated enterprise.

Under the normal procedure, we or our paying agent must withhold the full Belgian withholding tax (without taking into account the Treaty rate). Qualifying Holders may make a claim for reimbursement for amounts withheld in excess of the rate defined by the Treaty. The reimbursement form (Form 276

Div-Aut.)

may be obtained from the Centre Etrangers, Team 6, Kruidtuinlaan 50, PO 3429, 1000 Brussels, Belgium or online on the website of the Belgian tax authorities. Qualifying Holders may also, subject to certain conditions, obtain the reduced Treaty rate at source. Qualifying Holders should deliver a duly completed Form 276

Div-Aut.

no later than ten days after the date on which the dividend is paid or attributed. U.S. holders should consult their own tax advisors as to whether they qualify for reduction in withholding tax upon payment or attribution of dividends, and as to the procedural requirements for obtaining a reduced withholding tax upon the payment of dividends or for making claims for reimbursement.

Withholding tax is also not applicable, pursuant to Belgian domestic tax law, on dividends paid to certain U.S. pension funds provided that the U.S. pension fund (i) qualifies as a

non-resident

saver for Belgian withholding tax purposes (i.e., it has a separate legal personality and fiscal residence outside of Belgium and without a permanent establishment or fixed base in Belgium), (ii) has a corporate purpose that consists solely in managing and investing funds collected in order to pay legal or complementary pensions, (iii) has activity that is limited to the investment of funds collected in the exercise of its statutory purpose, without any profit making activity and (iv) is exempt from income taxes in the United States. Furthermore, such pension fund may not contractually be obligated to redistribute the dividends to any beneficial owner of such dividends for whom it would manage the ADSs nor obligated to pay a manufactured dividend with respect to the ADSs under a securities borrowing transaction (save in certain particular cases as described in Belgian law) and subject to certain procedural formalities.

Under Belgian domestic tax law, a withholding tax exemption is available to dividends paid to a

non-resident

corporate shareholder (located in a Member State of the European Union or in a country with which Belgium has entered in a double tax treaty including sufficient information exchange provisions) provided that (i) at the date of payment or attribution of the dividend it holds a participation in our company representing at least 10% of our share capital, (ii) this holding is held or will be held in full ownership for an uninterrupted period of at least one year, (iii) this

non-resident

corporate shareholder is tax resident of the country where it is established according to the tax laws of and the bilateral tax treaties established by such country, (iv) this

non-resident

corporate shareholder is subject to a corporate income tax regime similar to Belgian corporate income tax regime without benefitting from a tax regime that derogates from the ordinary tax regime and (v) its legal form is (similar to one of the legal forms) listed in the annex of the E.U. directive dated 23 July 1990 (90/435/EC) as amended by the directive of 22 December 2003 (2003/123/EC). This reduced withholding tax will apply provided that certain procedural formalities are complied with.

Finally, a withholding tax exemption is available, pursuant to Belgian domestic tax law, to dividends paid to a

non-resident

corporate shareholder (located in the European Economic Area or in a country with which Belgium has entered in a double tax treaty including sufficient information exchange provisions) to the extent that at the date of payment or attribution of the dividend it holds a participation in our company representing less than 10% of our share capital but the acquisition value of which is at least €2.5 million and provided that certain other conditions are met, i.e., that (i) this holding is held or will be held in full ownership for an uninterrupted period of at least one year (ii) this

non-resident

corporate shareholder is subject to a corporate income tax regime similar to Belgian corporate income tax regime without benefitting from a tax regime that derogates from the ordinary tax regime, and (iii) its legal form is (similar to one of the legal forms) listed in the annex I, part A, of the E.U. directive dated 30 November 2011 (2011/96/EU) as amended by the directive of 8 July 2014 (2014/86/EU). This reduced withholding tax will apply only if and to the extent that the ordinary Belgian withholding tax cannot be credited or reimbursed to the

non-resident

corporate shareholder referred to above and subject to certain procedural formalities.

Capital Gains and Losses

Pursuant to the Treaty, capital gains and/or losses realized by a Qualifying Holder from the sale, exchange or other disposition of ADSs do not fall within the scope of application of Belgian domestic tax law.

Capital gains realized on ADSs by a corporate Holder which is not entitled to claim the benefits of the Treaty under the limitation of benefits article included in the Treaty are generally not subject to taxation in Belgium unless the corporate Holder is acting through a Belgian permanent establishment or a fixed place in Belgium to which the ADSs are effectively connected. Capital losses are not deductible.

Private individual Holders who are not entitled to claim the benefits of the Treaty under the limitation of benefits article included in the Treaty and which are holding ADSs as a private investment will, as a rule, not be subject to tax on any capital gains arising out of a disposal of ADSs. Losses will, as a rule, not be deductible in Belgium.

However, if the gain realized by such individual Holders on ADSs is deemed to be realized outside the scope of the normal management of such individual’s private estate and the capital gain is obtained or received in Belgium, the gain will in principle be taxable at 33%. The Official Commentary to the ITC 1992 stipulates that occasional transactions on a stock exchange regarding ADSs should not be considered as transactions realized outside the scope of normal management of one’s own private estate.

Capital gains realized by such individual Holders on the disposal of ADSs for consideration, outside the exercise of a professional activity, to a

non-resident

company (or a body constituted in a similar legal form), to a foreign state (or one of its political subdivisions or local authorities) or to a

non-resident

legal entity who is established outside the European Economic Area, are in principle taxable at a rate of 16.5% if, at any time during the five years preceding the sale, such individual Holders has owned directly or indirectly, alone or with his/her spouse or with certain relatives, a substantial shareholding in us (that is, a shareholding of more than 25% of our shares).

Table of Contents

Capital gains realized by a Holder upon the redemption of ADSs or upon our liquidation will generally be taxable as a dividend. See section “Dividend Withholding Tax.”

Estate and Gift Tax

There is no Belgian estate tax on the transfer of ADSs upon the death of a Belgian

non-resident.

Donations of ADSs made in Belgium may or may not be subject to gift tax in Belgium depending on the modalities under which the donation is carried out.

Belgian Tax on Stock Exchange Transactions

A tax on stock exchange transactions (taxe sur les opérations de bourse/taks op de beursverrichtingen) is generally levied on the purchase and the sale and on any other acquisition and transfer for consideration of existing ADSs on the secondary market carried out by a Belgian resident investor through a professional intermediary if (i) executed in Belgium through a professional intermediary, or (ii) deemed to be executed in Belgium, which is the case if the order is directly or indirectly made to a professional intermediary established outside of Belgium, either by private individuals having their usual residence in Belgium, or legal entities for the account of their seat or establishment in Belgium.

The applicable rate amounts to 0.35% of the consideration paid but with a cap of € 1,600 per transaction and per party. The tax is due separately from each party to any such transaction, i.e., the seller (transferor) and the purchaser (transferee), both collected by the professional intermediary.

However, if the intermediary is established outside of Belgium, the tax will in principle be due by the ordering private individual or legal entity, unless that individual or entity can demonstrate that the tax has already been paid. Professional intermediaries established outside of Belgium can, subject to certain conditions and formalities, appoint a Belgian representative for tax purposes, which will be liable for the tax on stock exchange transactions in respect of the transactions executed through the professional intermediary.

Belgian

non-residents

who purchase or otherwise acquire or transfer, for consideration, ADSs in Belgium for their own account through a professional intermediary may be exempt from the tax on stock exchange transactions if they deliver a sworn affidavit to the intermediary in Belgium confirming their

non-resident

status.

Prior to February 20, 2021, a tax on repurchase transactions (taxe sur les reports/taks op de reportverrichtingen) at the rate of 0.085% was due from each party to any such transaction entered into or carried out in Belgium by a Belgian resident investor in which a stockbroker acted for either party (with a maximum amount of € 1,600 per transaction and per party). This tax has been repealed following the Law of 26 January 2021.

No stock exchange tax, nor tax on repurchase transactions is payable by: (i) professional intermediaries described in Article 2, 9° and 10° of the Law of August 2, 2002 acting for their own account, (ii) insurance companies described in Article 2, §1 of the Law of 9 July 1975 acting for their own account, (iii) professional retirement institutions referred to in Article 2, 1° of the Law of October 27, 2006 relating to the control of professional retirement institutions acting for their own account, (iv) collective investment institutions acting for their own account, or (v) regulated real estate companies (for the stock exchange tax only).

No stock exchange tax, nor tax on repurchase transactions will thus be due by Holders on the subscription, purchase or sale of ADSs, if the Holders are acting for their own account. In order to benefit from this exemption, the Holders must file with the professional intermediary in Belgium a sworn affidavit evidencing that they are

non-residents

for Belgian tax purposes

Belgian Annual Tax on Securities Accounts

Pursuant to the Law of February 17, 2021 introducing a new annual tax on securities accounts due on securities accounts held through an intermediary if the average value of the taxable financial instruments held on this securities account exceeds €1 million during a reference period of 12 consecutive months. This new annual tax on securities accounts has been introduced because the previous tax on securities accounts was annulled by the Belgian Constitutional Court.

The annual tax on securities accounts is due irrespective of whether the holder of a securities account is a physical person or a legal entity. If the holder of a securities account is a Belgian resident, the annual tax on securities accounts will be applicable both to securities accounts held in Belgium as well as securities accounts held abroad. For

non-residents,

only securities accounts held in Belgium fall in scope of the annual tax on securities accounts. A double tax treaty could prevent Belgium to levy the annual tax on securities accounts.

Certain exemptions exist to mitigate the impact of the annual tax on securities accounts on the financial sector. As such, securities accounts held by certain financial undertakings are exempt.

All securities held on a securities account are targeted, such as shares, bonds, participations in investment funds and investment companies, but also derived products, such as index trackers, turbo’s, real estate certificates and cash. The rate of the annual tax on securities accounts amounts to 0.15% on securities accounts of which the average value exceeds €1 million during a reference period of 12 consecutive months. In order to avoid that the payment of the tax would result in a decrease of the average value below the €1 million threshold, the rate is limited to 10% of the difference between the taxable base and €1 million in those cases. The reference period is a subsequent period of 12 months starting on October 1 and ending September 30 of the subsequent year or (i) any earlier date when the account is closed; or (ii) the moment when the account holder becomes a resident of a state with which Belgium has concluded a tax treaty and the tax treaty allocates the taxing rights to the other state. The average value is calculated by taking the average of the securities accounts values on December 31, March 31, June 30 and September 30.

Table of Contents

The tax must be declared and paid by the Belgian resident intermediary with whom the securities account is held. If a securities account is held with a

non-resident

intermediary, the holder of the securities account itself is responsible for the declaration and the payment of the annual tax on securities accounts. Alternatively, the foreign intermediary could also voluntarily appoint a recognized responsible representative in Belgium to declare and pay the tax.

In case of

non-declaration,

late, inaccurate or incomplete declaration, as well as

non-payment

or late payment, a penalty varying from 10% to 200% of the tax due can be imposed. Every holder of the securities account is jointly and severally liable to pay these penalties. The Law furthermore includes a general anti-abuse provision pursuant to which the following is not allowed: (i) distributing taxable financial instruments over different securities accounts to avoid the threshold of €1 million for an individual account, (ii) converting taxable financial instruments into nominative securities (the latter are out of scope of the tax); (iii) transferring a securities account to a foreign legal entity which then transfers the securities to a foreign securities account, etc. In the aforementioned circumstances, there is a refutable presumption that abuse exists. However, the Law also includes situations in which there is an irrefutable presumption of abuse. As such, the following transactions taking place as of October 30, 2020 onwards will be considered to constitute abuse: (i) splitting of a securities account into multiple securities accounts held by the same intermediary; and (ii) the conversion of taxable financial instruments held in a securities account to nominal financial instruments.

Prospective Holders should consult their own tax advisors as to whether they are subject to the new annual tax on securities accounts.

Proposed Financial Transactions Tax

On February 14, 2013, the European Commission published a proposal for a Directive for a common financial transactions tax (“FTT”) in Belgium, Germany, Greece, Spain, France, Italy, Austria, Portugal, Slovenia, Estonia and Slovakia (collectively, the “Participating Member States”). On December 8, 2015, Estonia declared that it will no longer support the FTT.

The proposed FTT has a very broad scope and could, if introduced in its current form, apply to certain dealings in ADSs in certain circumstances. The FTT could apply in certain circumstances to persons both within and outside of the Participating Member States. Generally, it would apply to certain dealings in ADSs where at least one party is a financial institution, and at least one party is established in a Participating Member State.

A financial institution may be, or be deemed to be, “established” in a Participating Member State in a broad range of circumstances, including by transacting with a person established in a Participating Member State.

Currently, the proposed FTT remains subject to further negotiations between the Participating Member States (excluding Estonia). It may therefore be adjusted prior to any implementation, of which the timing and fate remains unclear. Moreover, additional E.U. Member States could decide to participate or drop out of the negotiations. Prospective Holders of ADSs are advised to seek their own professional advice in relation to the FTT.

U.S. Taxation

The following is a discussion of the material U.S. federal income tax considerations to U.S. holders (as defined below) of acquiring, holding and disposing of the ADSs. The following discussion applies only to U.S. holders that purchase ADSs, will hold ADSs as capital assets for U.S. federal income tax purposes (generally, assets held for investment) and that are not residents of, or ordinarily resident in, Belgium for tax purposes nor hold their ADSs as part of a permanent establishment in Belgium. The discussion also does not address any aspect of U.S. federal taxation other than U.S. federal income taxation. In particular, this summary does not address all tax considerations applicable to investors that own (directly or by attribution) 10% or more of our stock by vote or value, nor does this summary discuss all of the tax considerations that may be relevant to certain types of investors subject to special treatment under the U.S. federal income tax laws (such as financial institutions, insurance companies, real estate investment trusts, regulated investment companies, investors liable for the alternative minimum tax, certain U.S. expatriates, individual retirement accounts and other

tax-deferred

accounts, partnerships or other pass-through entities for U.S. federal income tax purposes,

tax-exempt

organizations, dealers in securities or currencies, securities traders that elect

mark-to-market

tax accounting, investors that will hold the ADSs as part of constructive sales, straddles, hedging, integrated or conversion transactions for U.S. federal income tax purposes or investors whose “functional currency” is not the U.S. dollar). Further, this discussion is limited to U.S. holders that hold our ADSs or ordinary shares as “capital assets” within the meaning of Section 1221 of the Code (generally, property held for investment) at all relevant times and does not address all U.S. federal income tax consequences relevant to a U.S. holder’s particular circumstances, including the impact of the Medicare tax on net investment income.

The following summary is based on the U.S. Internal Revenue Code of 1986, as amended (the “Code”), U.S. Treasury Regulations thereunder, published rulings of the U.S. Internal Revenue Service (the “IRS”), the Treaty, and judicial and administrative interpretations thereof, in each case as available on the date of this prospectus supplement. Changes to any of the foregoing, or changes in how any of these authorities are interpreted, may affect the tax consequences set out below, possibly retroactively. No ruling will be sought from the IRS with respect to any statement or conclusion in this discussion, and there can be no assurance that the IRS will not challenge such statement or conclusion in the following discussion or, if challenged, a court will uphold such statement or conclusion.

For purposes of the following summary, a “U.S. holder” is a beneficial owner of ADSs that is for U.S. federal income tax purposes: (i) a citizen or individual resident of the United States, (ii) a corporation or other entity treated as a corporation for U.S. federal income tax purposes created or organized in or under the laws of the United States or any state thereof (including the District of Columbia), (iii) an estate, the income of which is subject to U.S. federal income taxation regardless of its source or (iv) a trust if (x) a court within the United States is able to exercise primary supervision over its administration and (y) one or more United States persons (as defined in the Code) have the authority to control all of the substantial decisions of such trust.

Table of Contents

If a partnership (including any entity treated as a partnership for U.S. federal income tax purposes) holds ADSs, the U.S. federal income tax consequences to the partners of such partnership will depend on the activities of the partnership and the status of the partners. A partnership considering an investment in ADSs, and partners in such partnership, should consult their own tax advisers about the consequences of the investment.

We do not expect to be a PFIC, and the discussion under “—Distributions by Us” and “—Proceeds from the Sale, Exchange or Retirement of the ADSs” below assumes we will not be a PFIC. See “—Passive Foreign Investment Company” discussion below.

Prospective purchasers of ADSs should consult their own tax advisers with respect to the U.S. federal, state, local and

non-U.S.

tax consequences to them in their particular circumstances of acquiring, holding, and disposing of, ADSs.

Ownership of ADSs in General

The discussion below is based, in part, on representations by the Depositary and assumes that each obligation under the deposit agreement and any related agreement will be performed in accordance with its terms.

For U.S. federal income tax purposes, an owner of ADSs generally will be treated as the owner of the ordinary shares represented by such ADSs. However, the U.S. Treasury has expressed concerns that parties to whom interests such as the ADSs are delivered in transactions similar to

pre-release

transactions may be taking actions that are inconsistent with the claiming of foreign tax credits for U.S. holders of ADSs. Accordingly, the analysis of the creditability of Belgian taxes could be affected by actions taken by parties to whom the ADSs are

pre-released.

No gain or loss will be recognized if you exchange ADSs for the ordinary shares represented by those ADSs. Your tax basis in such ordinary shares will be the same as your tax basis in such ADSs, and the holding period in such ordinary shares will include the holding period in such ADSs.

Distributions by Us

Subject to the application of the PFIC rules discussed below, the U.S. dollar value of distributions paid by us (including the amount of any taxes withheld) out of its earnings and profits, as determined under U.S. federal income tax principles, will be subject to tax as foreign source ordinary dividend income and will be includible in your gross income upon receipt by the Depositary. However, we do not maintain calculations of its earnings and profits in accordance with U.S. federal income tax accounting principles. U.S. holders should therefore assume that any distribution by us with respect to ordinary shares or ADSs will constitute ordinary dividend income. Subject to applicable limitations, so long as the ADSs are regularly traded on the Nasdaq Global Select Market, we expect that dividends paid by us will be classified as “qualified dividend income” generally subject to tax at lower rates than other items of ordinary income when received by individuals and other

non-corporate

U.S. holders. Any dividends we pay with respect to the ADSs or ordinary shares will constitute foreign source income for foreign tax credit purposes.

The U.S. dollar value of distributions paid by us will be calculated by reference to the exchange rate in effect on the date the dividend distribution is received by the Depositary, regardless of when the Depositary converts the payments into U.S. dollars. If the foreign currency is converted by the Depositary on a later date, a U.S. holder will be required to recognize foreign currency gain or loss in respect of the foreign currency based on the difference between the rate at which it is converted and the rate on the date the dividend was received by the Depositary.

Subject to certain limitations, Belgian withholding tax, if any, paid in connection with any distribution with respect to ordinary shares or ADSs may be eligible to be claimed as a credit against your U.S. federal income tax liability. Alternatively, if a credit is not claimed for any

non-U.S.

income taxes for that taxable year, such Belgian withholding tax may be eligible to be taken as a deduction . If you are eligible for benefits under the Treaty or are otherwise entitled to a refund for the taxes withheld, you will not be entitled to a foreign tax credit or deduction for the amount of any Belgian taxes withheld in excess of the maximum rate under the Treaty or for the taxes with respect to which you can obtain a refund from the Belgian taxing authorities. As the relevant rules are very complex, you should consult your own tax advisor concerning the availability and utilization of the foreign tax credit or deductions for

non-U.S.

taxes in your particular circumstances.

Proceeds from the Sale, Exchange or Retirement of the ADSs

Upon the sale, exchange or retirement of ADSs, a U.S. holder will generally recognize U.S. source capital gain or loss equal to the difference, if any, between the U.S. dollar amount realized on the sale, exchange or retirement and the U.S. holder’s tax basis in the ADSs (generally their cost in U.S. dollars). Any gain or loss generally will be long-term capital gain or loss if the ADSs have been held for more than a year. If you are a

non-corporate

U.S. holder, including an individual U.S. holder, you may be eligible for reduced U.S. federal income tax rates for long-term capital gains. The deductibility of capital losses is subject to limitations.

Gain or loss you recognize on the sale, exchange or retirement of ADSs will generally be treated as U.S. source income or loss for foreign tax credit purposes.

Table of Contents

Passive Foreign Investment Company

We believe that we were not a PFIC for the tax year ended December 31, 2021, and we do not expect to be classified as a PFIC for U.S. federal income tax purposes for the current tax year ending December 31, 2022, or for the foreseeable future. Additionally, PFIC status is a factual determination for each taxable year that cannot be made until after the close of each such year and will depend to a large degree on the market price of our ADSs, which could fluctuate significantly. Therefore, we cannot assure you that we will not be considered a PFIC for the taxable year ended December 31, 2021 or in any subsequent taxable year. If we are a PFIC at any time during the holding period of a U.S. holder, the U.S. holder would be subject to potentially materially greater amounts of tax and subject to additional U.S. tax reporting and compliance requirements. In addition, a

non-corporate

U.S. holder will not be eligible for qualified dividend income treatment on dividends received from us if we are treated as a PFIC for the taxable year in which the dividends are received or for the preceding taxable year.

non-U.S.

corporation is a PFIC in any taxable year in which, after taking into account certain look-through rules, either (i) at least 75% of its gross income is passive income or (ii) at least 50% of the average value (determined on a quarterly basis) of its assets is attributable to assets that produce or are held to produce passive income. Passive income generally includes dividends, interest, rents, royalties, gross income from certain commodities transactions, and capital gains. If a

non-U.S.

corporation owns at least 25% by value of the stock of another corporation, the foreign corporation is treated for purposes of the PFIC tests as owning its proportionate share of the assets of the other corporation, and as receiving directly its proportionate share of the other corporation’s income. The same general look-through rule applies when a foreign corporation owns at least 25% by value of the partnership (a look-through partnership)—the foreign corporation is treated as owning its share of the partnership’s assets and deriving its share of the partnership’s income, characterized as passive or active at the partnership level. In the case the foreign corporation satisfies an “active partner” test, the foreign corporation may treat

less-than-25%

owned partnerships as look-through partnerships, unless the foreign corporation elects otherwise. Although the determination of whether a

non-U.S.

corporation is a PFIC for a given taxable year is based on its income and assets for that taxable year, as determined under the PFIC rules, once a

non-U.S.

corporation is a PFIC for any taxable year, it generally remains a PFIC for any investors that owned interests in all or a portion of such taxable year even if it would not otherwise qualify as a PFIC in later taxable years. We do not undertake to monitor our PFIC status on an ongoing basis.

The Code imposes additional taxes on gains from the sale or other disposition of, and “excess distributions” with respect to, shares of a PFIC owned directly (or deemed to be owned directly or indirectly under certain attribution rules) by a U.S. holder. In general, an excess distribution is any distribution to the U.S. holder that is greater than 125% of the average annual distributions received by the U.S. holder (including return of capital distributions) during the three preceding taxable years or, if shorter, the U.S. holder’s holding period for the ADSs. If we were a PFIC in any year in which a U.S. holder held the ADSs (i) the gain or excess distribution would be allocated ratably over the U.S. holder’s holding period for the ADSs, (ii) the amount allocated to the taxable year in which the gain or excess distribution was realized and to any year before we became a PFIC would be taxable as ordinary income, (iii) the amount allocated to each other prior year would be subject to tax at the highest rate in effect for that year and (iv) the interest charge generally applicable to underpayments of tax would be imposed in respect of the tax allocated to each such year. For these purposes, a U.S. holder who uses the ADSs as collateral for a loan would be treated as having disposed of such ADSs.

The PFIC rules provide for certain elections that can, in certain circumstances, alter the tax consequences of PFIC status as generally described above, thereby mitigating the adverse tax consequences that generally apply under the PFIC rules as described above. One such election, the “qualified electing fund” or “QEF” election, allows a U.S. holder to include in income its share of the corporation’s income on a current basis and it requires (among other things) that the U.S. holder include with its U.S. federal income tax return a “PFIC Annual Information Statement” provided by the foreign corporation and disclosing to the U.S. Holder its pro rata share of the corporation’s “ordinary earnings” and “net capital gain” as determined under U.S. federal income tax principles. A QEF election also can, in certain circumstances, cause the “excess distribution” regime described above not to apply, generally resulting in more favorable tax consequences upon receipt of PFIC excess distributions or the recognition of gain on sale of PFIC shares (or ADSs). However, we do not intend to calculate our “ordinary earnings” or “net capital gain,” nor do we intend to supply U.S. holders with the required “PFIC Annual Information Statement.” Therefore, it generally will not be possible for you to make a QEF election if we are, or if we become, a PFIC.

A different election, the

“mark-to-market”

election could be available if our ADSs or ordinary shares, as applicable, are considered “marketable stock” as defined under applicable U.S. Treasury Regulations. This election can be made if the ADSs are considered to be “marketable securities” for purposes of the PFIC rules. The ADSs should be marketable securities for these purposes to the extent they are “regularly traded” on the Nasdaq Global Select Market. Generally, shares are treated as “regularly traded” in any calendar year in which more than a de minimis quantity of the shares are traded on a qualified exchange on at least 15 days during each calendar quarter. Subject to certain limitations, a U.S. holder that makes a valid

mark-to-market

election with respect to the ADSs would be required to take into account the difference, if any, between the fair market value at the end of each taxable year and the fair market value at the end of the preceding taxable year (or the acquisition price in the first year the election is in effect) of those ADSs, as ordinary income or ordinary loss (but only to the extent of the net amount previously included as income by the U.S. holder as a result of the

mark-to-market

election). A U.S. holder’s basis in the ADSs will be increased by the amount of any ordinary income inclusion and decreased by the amount of any ordinary loss taken into account under the

mark-to-market

rules. Gains from an actual sale or other disposition of the ADSs for which this election has been properly made would be treated as ordinary income, any losses incurred on a sale or other disposition of the ADSs would be treated as an ordinary loss to the extent of any net

mark-to-market

gains for prior years and any additional loss would be capital loss.

Even if a valid

mark-to-market

election is made with respect to the ADSs, there is a significant risk that indirect interests in any of our subsidiaries that are PFICs will not be covered by this election but will be subject to the excess distribution rules described above. Under these rules, distribution from, and dispositions of interests in, these subsidiaries, as well as certain other transactions, generally will be treated as a distribution or disposition subject to the discussion above regarding excess distributions.

Table of Contents

Prospective U.S. holders are urged to consult their own tax advisers about the consequences of holding the ADSs if we are considered a PFIC in any taxable year, including the availability of the

mark-to-market

election, and whether making the election would be advisable in their particular circumstances. In particular, U.S. holders should consider carefully the impact of a

mark-to-market

election with respect to their ADSs given that there is a significant risk that we will have subsidiaries that are classified as PFICs.

Medicare Tax

Certain U.S. holders who are individuals, estates and trusts will be required to pay an additional 3.8% tax on some or all their “net investment income,” which generally includes its dividend income and net gains from the disposition of the ADSs. U.S. holders should consult their own tax advisors regarding the applicability of this additional tax on their particular situation.

Information Reporting and Backup Withholding

Information returns may be filed with the IRS in connection with distributions on the ADSs and the proceeds from the sale or other disposition of the ADSs unless a U.S. holder establishes that it is exempt from the information reporting rules. A U.S. holder may be subject to backup withholding on these payments if it fails to provide its tax identification number to the paying agent and comply with certain certification procedures. The amount of any backup withholding from a payment to a U.S. holder will be allowed as a credit against its U.S. federal income tax liability and may entitle the U.S. holder to a refund, provided that the required information is timely furnished to the IRS.

Tax Return Disclosure Requirement

U.S. federal income tax law requires certain U.S. investors to disclose information relating to investments in securities of a

non-U.S.

issuer. Failure to comply with applicable disclosure requirements could result in the imposition of substantial penalties. U.S. holders should consult their own tax advisors regarding any disclosure obligations.

F. Dividends and Paying Agents

Not applicable.

G. Statement by Experts

Not applicable.

H. Documents on Display

We previously filed with the SEC our registration statement on Form

F-1

(Registration

No. 333-194982),

as amended, and our registration statement on Form

F-3

(Registration

No. 333-258949),

including the prospectuses contained therein, to register our ordinary shares. We have also filed with the SEC a related registration statement on

F-6

(Registration

No. 333-196734)

to register the ADSs.

We are subject to the periodic reporting and other informational requirements of the Exchange Act as applicable to foreign private issuers. Our annual reports on Form

20-F

are due within four months after each fiscal year end. We are not required to disclose certain other information that is required from U.S. domestic issuers. Also, as a foreign private issuer, we are exempt from the rules of the Exchange Act prescribing the furnishing of proxy statements to shareholders and our directors, senior management and principal shareholders are exempt from the reporting and short-swing profit recovery provisions contained in Section 16 of the Exchange Act.

Our SEC filings, including the registration statement, are available to you on the SEC’s website at http://www.sec.gov.

We have filed our restated articles of association and all other deeds that are to be published in the annexes to the Belgian State Gazette with the clerk’s office of the Commercial Court of Leuven (Belgium), where they are available to the public. A copy of our restated articles of association is also publicly available as an exhibit to this annual report, as well as on the website of the Royal Federation of Belgian Notaries (only in Dutch, French or German, https://statuten.notaris.be/costa_v1/enterprises/search). This website address is included in this annual report as an inactive textual reference only, and the information and other content appearing on this website are not incorporated by reference into this annual report. In accordance with Belgian law, we must prepare audited annual statutory and consolidated financial statements. The audited annual statutory and consolidated financial statements and the reports of our board and statutory auditor relating thereto are filed with the Belgian National Bank, where they are available to the public.

Table of Contents

I. Subsidiary Information

Not applicable.

Table of Contents

ITEM 11.

QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to market risk from fluctuations in interest rates and foreign currency exchange rates which may adversely affect our results of operations and financial condition. We seek to minimize these risks through regular operating and financing activities.

Interest Rate Risk

Although we mainly have loans outstanding with a fixed interest rate, some of the loans have been contracted with variable interest rates. The most significant loans with variable interest rates have been secured by means of a variable to fixed interest rate swap. We therefore believe that we are not materially affected by changes in interest rates. For information with respect to the interest rate swaps, see Note 20 to our audited consolidated financial statements.

Foreign Exchange Rate Risk and Inflation Risk

We transact business globally and are subject to risks associated with fluctuating foreign exchange rates. The geographic areas outside of the Eurozone to which we sell our products and services are generally not considered to be subject to a substantially higher inflation than in the Eurozone. In the years ended December 31, 2021, 2020 and 2019, 35%, 35% and 29% of our revenue, respectively, were derived from sales in a currency different from the euro. Receivables denominated in a foreign currency are initially recorded at the exchange rate at the transaction date and subsequently

re-measured

in euro based on

period-end

exchange rates. Transaction gains and losses that arise from exchange rate fluctuations are charged to income. We primarily have exposure to the U.S. dollar, British pound, Japanese yen and Brazilian real as foreign currency.

If the U.S. dollar (rate for €1) would have appreciated by 10%, the operating result would have been € 1.3 million higher, excluding the effect of the cash and term accounts held in U.S. dollars. If the U.S. dollar (rate for €1) would have depreciated by 10%, the net result would have been € 1.1 million lower, excluding the effect of the cash and term accounts held in U.S. dollars.

To limit the exposure to foreign currency rate fluctuations on the British pound and Japanese yen, we have entered into currency rate swaps as of 2017.

Additionally, we are exposed to credit risk, liquidity risk and challenges related to capital management.

Credit Risk

Credit risk is the risk that third parties may not meet their contractual obligations resulting in a loss for us. We are exposed to credit risk from our operating activities and from our financing activities, which are mainly deposits with financial institutions. We limit this exposure by contracting with credit-worthy business partners or with financial institutions which meet high credit rating requirements. In addition, the portfolio of receivables is monitored on a continuous basis.

Customer credit risk is managed by each business unit subject to our established policy, procedures and controls relating to customer credit risk management. An impairment analysis is performed at each reporting date using a provision matrix to measure ECLs. The provision rates are based on days past due for groupings of various customer segments with similar loss patterns (i.e., by legal entity). The calculation reflects the probability-weighted outcome, the time value of money and reasonable and supportable information that is available at the reporting date about past events, current conditions and forecasts of future economic conditions. Generally, trade receivables are

written-off

if past due for more than one year and are not subject to enforcement activity. The maximum exposure to credit risk at the reporting date is the carrying value of each class of financial assets at amortized cost or fair value, as disclosed in Note 20 to our consolidated financial statements. We do not hold collateral as security.

We evaluate the concentration of risk with respect to trade receivables as low, as our customers are located in several jurisdictions and industries and operate in largely independent markets.

Liquidity Risk

The liquidity risk is that we may not have sufficient cash to meet our payment obligations. This risk is countered by

day-by-day

liquidity management at corporate level. We have historically entered into financing and lease agreements with financial institutions to finance significant projects and certain working capital requirements. We no longer have undrawn lines of credit at December 31, 2021. These line of credit arrangements do not contain significant financial covenants.

On December 20, 2017, EIB and Materialise entered into a finance contract to support our ongoing research and development programs for growth from 2017 to 2020. The contract provides a credit of up to € 35.0 million drawable in two tranches. The first tranche could not exceed € 25.0 million and could be drawn during the first year of the contract. We drew € 10.0 million of this first tranche in the course of 2018 and € 25.0 million in the second tranche in the course of 2019. The duration of the loan will be between six to eight years starting from the disbursement of the respective tranches, and includes a

two-year

loan reimbursement grace period. Loans under the contract will be made at a fixed rate, based on the Euribor rate at the time of the borrowing, plus a variable margin. The interest rate for the first tranche is equal to 2.40% and the interest rate for the second tranche is 2.72% and varies in function of certain EBITDA levels and debt ratios. The contract contains customary security, covenants and undertakings. As of December 31, 2019, € 35.0 million was drawn in connection with this agreement.

Table of Contents

Capital Management

The primary objective of our capital management strategy is to ensure we maintain healthy capital ratios to support our business and maximize shareholder value. Capital is defined as our shareholders’ equity.

We consistently review our capital structure and make adjustments in light of changing economic conditions. We made no changes to our capital management objectives, policies or processes during the years ended December 31, 2021, 2020 and 2019

Table of Contents

ITEM 12.

DESCRIPTION OF SECURITIES OTHER THAN EQUITY SECURITIES

A. Debt Securities

Not applicable.

B. Warrants and Rights

Not applicable.

C. Other Securities

Not applicable.

D. American Depositary Shares

Bank of New York Mellon serves as the depositary for the ADSs. Each ADS represents one ordinary share (or a right to receive one ordinary share) deposited with the principal Amsterdam office of ING Securities Services, Inc., as custodian for the depositary. Each ADS also represents any other securities, cash or other property which may be held by the depositary. The depositary’s corporate trust office at which the ADSs are administered is located at 240 Greenwich Street, New York, New York 10286. The Bank of New York Mellon’s principal executive office is located at 240 Greenwich Street, New York, New York 10286.

A deposit agreement among us, the depositary and the ADS holders sets out the ADS holder rights as well as the rights and obligations of the depositary. New York law governs the deposit agreement and the ADSs. A copy of the deposit agreement is incorporated by reference as an exhibit to this annual report on Form

20-F.

Pursuant to the terms of the deposit agreement, you, as an ADS holder, will be required to pay the following fees to the depositary:


Persons depositing or withdrawing ordinary shares or ADS holders must pay to the depositary:		For:
$5.00 (or less) per 100 ADSs (or portion of 100 ADSs)		Issuance of ADSs, including issuances resulting from a distribution of ordinary shares or rights or other property

		Cancellation of ADSs for the purpose of withdrawal, including if the deposit agreement terminates

$0.05 (or less) per ADS		Any cash distribution to you

A fee equivalent to the fee that would be payable if securities distributed to you had been ordinary shares and the shares had been deposited for issuance of ADSs		Distribution of securities distributed to holders of deposited securities which are distributed by the depositary to you

$0.05 (or less) per ADS per calendar year		Depositary services

Registration or transfer fees		Transfer and registration of ordinary shares on our share register to or from the name of the depositary or its agent when you deposit or withdraw shares

Expenses of the depositary		Cable, telex and facsimile transmissions (when expressly provided in the deposit agreement) converting foreign currency to U.S. dollars

Taxes and other governmental charges the depositary or the custodian has to pay on any ADS or ordinary shares underlying an ADS, such as share transfer taxes, stamp duty or withholding taxes		As necessary

Any charges incurred by the depositary or its agents for servicing the deposited securities		As necessary

The depositary collects its fees for delivery and surrender of ADSs directly from investors depositing ordinary shares or surrendering ADSs for the purpose of withdrawal or from intermediaries acting for them. The depositary collects fees for making distributions to investors by deducting those fees from the amounts distributed or by selling a portion of distributable property to pay the fees. The depositary may collect its annual fee for depositary services by deduction from cash distributions or by directly billing investors or by charging the book-entry system accounts of participants acting for them. The depositary may collect any of its fees by deduction from any cash distribution payable to ADS holders that are obligated to pay those fees. The depositary may generally refuse to provide

fee-based

services until its fees for those services are paid.

Table of Contents

From time to time, the depositary may make payments to us to reimburse or share revenue from the fees collected from ADS holders, or waive fees and expenses for services provided, generally relating to costs and expenses arising out of establishment and maintenance of the ADS program. In performing its duties under the deposit agreement, the depositary may use brokers, dealers or other service providers that are affiliates of the depositary and that may earn or share fees or commissions.

Table of Contents

PART II

ITEM 13.

DEFAULTS, DIVIDEND ARREARAGES AND DELINQUENCIES

None.

Table of Contents

ITEM 14.

MATERIAL MODIFICATIONS TO THE RIGHTS OF SECURITY HOLDERS AND USE OF PROCEEDS

Material Modifications to the Rights of Security Holders

None.

Use of Proceeds

Not applicable.

Table of Contents

ITEM 15.

CONTROLS AND PROCEDURES

a) Disclosure Controls and Procedures

Our management, with the participation of our Chief Executive Officer and our Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2021. The term “disclosure controls and procedures,” as defined in Rules

13a-15(e)

and

15d-15(e)

under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost benefit relationship of possible controls and procedures. Based on this evaluation, management concluded as of December 31, 2021 that our disclosure controls and procedures were not effective due to the material weakness identified below.

b) Management’s Annual Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules

13a-15(f)

and

15d-15(f)

under the Exchange Act. Our internal control over financial reporting is a process designed by, or under the supervision of, our Chief Executive Officer and Chief Financial Officer and effected by our management and other personnel to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of our financial statements for external reporting purposes in accordance with IFRS. Internal control over financial reporting includes policies and procedures that pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; provide reasonable assurance that transactions are recorded as necessary to permit preparation of our financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with the authorization of our board of directors and management; and provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect all misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with our policies and procedures may deteriorate.

A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected on a timely basis.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2021 using the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in the Internal Control-Integrated Framework, 2013 (the “COSO 2013 Framework”).

Based on its assessment, our management, including our Chief Executive Officer and our Chief Financial Officer, has concluded that our internal control over financial reporting was not effective as of December 31, 2021 due to a material weakness in our internal control over financial reporting. We did not have effective monitoring processes to assess the consistent operation of internal control over financial reporting, including due to a lack of resources.

This material weakness could cause misstatements in any financial statement line items.

Notwithstanding the identified material weakness and management’s assessment that internal control over financial reporting was not effective as of December 31, 2021, management believes that the audited consolidated financial statements contained in this Annual Report on Form

20-F

fairly present, in all material respects, our financial condition, results of operations and cash flows for the fiscal years presented in conformity with IFRS.

100

Table of Contents

The material weakness did not result in any identified material misstatements to the financial statements.

c) Attestation Report of the Registered Public Accounting Firm

101

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Shareholders and Board of Directors

Materialise NV:

Opinion on Internal Control Over Financial Reporting

We have audited Materialise NV and subsidiaries’ (the Company) internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. In our opinion, because of the effect of the material weakness, described below, on the achievement of the objectives of the control criteria, the Company has not maintained effective internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated statements of financial position of the Company as of December 31, 2021 and 2020, the related consolidated income statements, consolidated statements of comprehensive income, consolidated statements of changes in equity, and consolidated cash flow statements for each of the years in the two-year period ended December 31, 2021, and the related notes (collectively, the consolidated financial statements), and our report dated April 29, 2022 expressed an unqualified opinion on those consolidated financial statements.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. A material weakness related to ineffective monitoring processes to assess the consistent operation of internal control over financial reporting, including due to a lack of resources, has been identified and included in management’s assessment.

The material weakness was considered in determining the nature, timing, and extent of audit tests applied in our audit of the 2021 consolidated financial statements, and this report does not affect our report on those consolidated financial statements.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting in Item 15(b). Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

102

Table of Contents

KPMG Bedrijfsrevisoren – KPMG Réviseurs d’Entreprises BV/SRL

/s/ Gotwin Victor Jaak Jackers

Zaventem, Belgium

April 29, 2022

103

Table of Contents

Changes in Internal Control over Financial Reporting

Other than discussed under “Remediation Progress over Prior Material Weaknesses” below, there were no changes in our internal control over financial reporting that occurred during the period covered by this report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Remediation Progress over Prior Material Weaknesses

In connection with the audits of our consolidated financial statements as of and for each of the years ended December 31, 2020 and 2019 we and our independent registered public accounting firm identified certain material weaknesses in our internal controls over financial reporting:

•

Ineffective risk assessment processes to identify and assess the risks of misstatement within the financial reporting process and to design and implement controls to mitigate those risks, in particular in the areas of loans and borrowings, taxes, leases and information produced by the entity that is used to operate certain controls over financial reporting.

•

Ineffective monitoring processes to assess the consistent operation of internal control over financial reporting and to remediate known control deficiencies, including due to a lack of resources.

•

Ineffective processes to ensure the proper review and approval of journal entries prior to posting to the general ledger.

•

Ineffective controls over the completeness and accuracy of information produced by the entity that is used to operate certain controls over financial reporting.

We implemented a remediation plan addressing deficiencies in our internal controls that were previously reported as of December 31, 2020, including in particular:

•

In respect of the risk assessment component of our internal control system, the previously identified material weakness is now remediated as of December 31, 2021 due to the following changes:

•

the risk assessment procedures necessary to identify process risk points within our control environment now operate at a sufficient level of precision to identify key risks, particularly in the areas of loans and borrowings, taxes, and leases;

•

for controls containing a review element, the definition and documentation of the steps to be performed by the control operator and the criteria for investigation (including the analysis if any thresholds used) were established; and

•

a systematic and disciplined approach for identifying information produced by the entity (IPE) and for testing controls over the completeness and accuracy of IPE was established.

•

In respect of our entity level controls, the monitoring component of our internal control system has been further improved due to the following changes:

•

the internal audit department was strengthened and performed a higher number of independent assessments of internal controls.

•

The material weakness identified over the review and approval of journal entries has been remediated as of December 31, 2021. We have updated the controls over manual journal entries with clearly defined criteria for investigation in general, and ensured consistent review and approval of the resulting journal entries by an independent reviewer.

•

We have remediated the previously identified material weakness related to certain process level controls as of December 31, 2021. We have updated the design of our controls over the completeness and accuracy of IPE used in the execution of certain controls.

Remediation Plan

During the year ending December 31, 2022, we plan to continue to further enhance our internal controls over financial reporting and to enhance our overall control environment. We are committed to ensuring that our internal control over financial reporting is designed and operating effectively. More particularly, as a result of the material weakness identified in paragraph 15(b), Management’s Annual Report on Internal Control over Financial Reporting, the following further remediation action is being taken:

•

We will strengthen our compliance functions and control ownership functions further with additional resources to assist in the monitoring processes to support the consistent operation of internal control over financial reporting.

Although we intend to complete the remediation process as promptly as possible, we cannot at this time estimate how long it will take to remediate these material weaknesses. In addition, we may discover additional material weaknesses that require additional time and resources to remediate and we may decide to take additional measures to address the material weaknesses or modify the remediation steps described above. Until these weaknesses are remediated, we plan to continue to perform additional analyses and other procedures to ensure that our consolidated financial statements are prepared in accordance with IFRS.

104

Table of Contents

ITEM 16A.

AUDIT COMMITTEE FINANCIAL EXPERT

Our board of directors has determined that each of the members of our audit committee, Johan De Lille, Jürgen Ingels and Bart Luyten, is an “audit committee financial expert” as defined in Item 16A of Form

20-F

under the Exchange Act and is independent under Rule

10A-3

under the Exchange Act.

105

Table of Contents

ITEM 16B.

CODE OF ETHICS

We have adopted a written code of conduct and ethics that outlines the principles of legal and ethical business conduct under which we do business. The code of conduct and ethics applies to all of our directors, senior management, consultants and other employees, including our Chief Executive Officer and Chief Financial Officer. We have posted this code of conduct and ethics on our website at www.materialise.com. This website address is included in this annual report as an inactive textual reference only, and the information and other content appearing on our website are not incorporated by reference into this annual report. We have not granted any waivers from any provision of our code of conduct and ethics since its adoption.

106

Table of Contents

ITEM 16C.

PRINCIPAL ACCOUNTANT FEES AND SERVICES

KPMG Bedrijfsrevisoren—KPMG Réviseurs d’Entreprises BV/SRL (PCAOB ID No. 1050

, with registered address at Luchthaven Brussel Nationaal 1K, 1930 Zaventem, Belgium) acted as our independent auditor for the fiscal year ended 31 December 2021 and 2020. BDO Bedrijfsrevisoren BV acted as our independent auditor for the fiscal year ended 31 December 2019. The following table sets forth by category of service the total fees for services provided by KPMG Bedrijfsrevisoren—KPMG Réviseurs d’Entreprises BV/SRL and its affiliates and BDO Bedrijfsrevisoren BV and its affiliates to us during 2021 and 2020.


	For the year ended December 31
in 000€	2021		2020
Audit Fees		1,006		1,151
Audit-Related Fees		478		43
All Other Fees		—		—
Total		1,484		1,194

Audit Fees

Audit fees consist of the aggregate fees billed in connection with the audit of our annual consolidated and statutory financial statements and internal controls.

Audit-Related Fees

Audit-related fees are fees for services that are traditionally performed by the independent accountants and in the table above primarily related to services performed in connection with the capital increase through public offering the quarterly attestation reports for EIB and the consent of BDO Bedrijfsrevisoren BV for referring to their audit opinion on the financial statements for RSPrint NV for the year 2017. In addition, KPMG Bedrijfsrevisoren - KPMG Réviseurs d’Entreprises BV/SRL reported on the merger between Materialise NV and Ailanthus NV.

All Other Fees

Non-audit

fees paid to KPMG Bedrijfsrevisoren—KPMG Réviseurs d’Entreprises BV/SRL or its affiliates or to BDO Bedrijfsrevisoren BV or to its affiliates for the fiscal years ended December 31, 2021 and 2020.

Audit Committee

Pre-Approval

Policies and Procedures

The

pre-approval

of the Audit Committee or member thereof, to whom

pre-approval

authority has been delegated, is required for the engagement of our independent auditors to render audit or

non-audit

services. Audit Committee

pre-approval

of audit and

non-audit

services will not be required if the engagement for the services is entered into pursuant to

pre-approval

policies and procedures established by our audit committee regarding our engagement of the independent auditors, provided the policies and procedures are detailed as to the particular service, our audit committee is informed of each service provided and such policies and procedures do not include delegation of the Audit Committee’s responsibilities under the Exchange Act to our management. Audit Committee

pre-approval

non-audit

services (other than review and attest services) also will not be required if such services fall within available exceptions established by the SEC.

All audit fees, audit related fees and tax fees for the fiscal years ended December 31, 2021 and 2020 were

pre-approved

under the

pre-approval

policies of the Audit Committee.

107

Table of Contents

ITEM 16D.

EXEMPTIONS FROM THE LISTING STANDARDS FOR AUDIT COMMITTEES

None.

108

Table of Contents

ITEM 16E.

PURCHASES OF EQUITY SECURITIES BY THE ISSUER AND AFFILIATED PURCHASERS

None.

109

Table of Contents

ITEM 16F.

CHANGE IN REGISTRANT’S CERTIFYING ACCOUNTANT

Not applicable.

110

Table of Contents

ITEM 16G.

CORPORATE GOVERNANCE

The Listing Rules of the Nasdaq Stock Market include certain accommodations in the corporate governance requirements that allow foreign private issuers, such as us, to follow “home country” corporate governance practices in lieu of the otherwise applicable corporate governance standards of the Nasdaq Stock Market. The application of such exceptions requires that we disclose each noncompliance with the Nasdaq Stock Market Listing Rules and describe the Belgian corporate governance practices we do follow in lieu of the relevant Nasdaq Stock Market corporate governance standard. We follow Belgian corporate governance practices in lieu of the corporate governance requirements of the Nasdaq Stock Market in respect of the following:

•

Quorum at Shareholder Meetings

. Nasdaq Stock Market Listing Rule 5620(c) requires that for any meeting of shareholders, the quorum must be no less than 33% or 1/3 of the outstanding ordinary shares. There is no quorum requirement under Belgian law for our shareholders’ meetings, except as provided for by law in relation to decisions regarding certain matters.

•

Independent Director Majority on Board/Meetings

. Nasdaq Stock Market Listing Rules 5605(b)(1) and (2) require that a majority of the board of directors must be comprised of independent directors and that independent directors must have regularly scheduled meetings at which only independent directors are present. We are not required under Belgian law to have any independent directors on our board of directors. However, our restated articles of association provide that our board of directors must be comprised of at least seven and no more than 11 directors, of which at least three directors must be independent directors under Belgian law. We do not intend to require our independent directors to meet separately from the full board of directors on a regular basis or at all although the board of directors is supportive of its independent members voluntarily arranging to meet separately from the other members of our board of directors.

•

Director Nominations/Remuneration and Nomination Committee Composition

. Nasdaq Stock Market Listing Rule 5605(d)(2) requires that compensation of officers must be determined by, or recommended to, the board of directors for determination, either by a majority of the independent directors, or a compensation committee comprised solely of independent directors. Nasdaq Stock Market Listing Rule 5605(e) requires that director nominees be selected, or recommended for selection, either by a majority of the independent directors or a nominations committee comprised solely of independent directors. Under Belgian law, we are not subject to any such requirements. In particular, we are not required by Belgian law to set up any compensation or nominations committees within our board of directors, and are therefore not subject to any Belgian legal requirements as to the composition of such committees either. However, our restated articles of association provide that our board of directors may form committees from among its members. See “Item 6. Directors, Senior Management and Employees—C. Board Practices —Board of Directors Practices.” Our board of directors has set up and appointed a Remuneration and Nomination Committee. Our Remuneration and Nomination Committee is currently comprised of three directors, one of whom is independent. In addition, as long as the Family Shareholders control, directly or indirectly, in the aggregate at least 20% of the voting rights attached to our ordinary shares, a majority of our directors must be appointed by our shareholders from a list of candidates proposed by the Family Shareholders.

•

Shareholder Approval of Equity Compensation Plans.

Nasdaq Stock Market Listing Rule 5635(c) requires shareholder approval prior to the issuance of securities in connection with equity-based compensation of officers, directors, employees or consultants. On December 18, 2015, our board of directors adopted a stock option plan, the 2015 Warrant Plan. Warrants under the 2015 Warrant Plan may be offered upon decision by our board of directors (or its proxy holder(s)) to employees, consultants and directors of our company and our subsidiaries. In lieu of the Nasdaq Stock Market Listing Rule 5635(c), we followed Belgian law regarding the issuance of shares or securities in connection with the remuneration of the directors and/or the employees of a Belgian company.

Under Belgian company law, a Belgian company may issue shares or grant rights to acquire shares pursuant to a resolution of the general meeting of shareholders or, within certain limits, pursuant to a resolution of the board of directors if so authorized by the shareholders’ meeting (the

so-called

authorized capital). By resolution of our extraordinary shareholders’ meeting of April 23, 2014, which entered into force on June 30, 2014, our shareholders authorized our board of directors, for a period of five years from August 18, 2014, to increase our share capital, in one or more transactions (including through the issuance of warrants), up to a maximum amount of € 2,714,634.83.

More recently, by resolution of our extraordinary shareholders’ meeting of November 5, 2020, which entered into force on November 9, 2020, our shareholders authorized our board of directors, for a period of five years from November 9, 2020, to increase our share capital, in one or more transactions (including through the issuance of warrants), up to a maximum amount of € 4,067,700.72.

The board of directors is authorized to limit or cancel the preferential subscription right of current shareholders (for example, when it decides to issue warrants), if this is in the interest of our company. The board of directors can do this for the benefit of one or more specific persons, even if these persons are not personnel of our company or our subsidiaries.

Pursuant to this authorization, our board of directors may determine to adopt other equity-based compensation plans for our officers, directors, employees or consultants.

111

Table of Contents

ITEM 16H.

MINE SAFETY DISCLOSURE

Not applicable.

112

Table of Contents

ITEM 16I.

DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS

Not applicable.

113

Table of Contents

PART III

ITEM 17.

FINANCIAL STATEMENTS

Not applicable.

114

Table of Contents

ITEM 18.

FINANCIAL STATEMENTS

See our consolidated financial statements beginning on page

F-1

of this annual report.

115

Table of Contents

ITEM 19.

EXHIBITS


1.1*		Restated Articles of Association of Materialise NV (English translation)

2.1		Deposit Agreement, dated as of June 24, 2014, among Materialise NV and The Bank of New York Mellon (incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form F-1 (File No. 333-194982))

2.2		Form of American Depositary Receipt (included in Exhibit 2.1)

2.3		Description of Securities (incorporated by reference to Exhibit 2.3 to the Company’s Annual Report on Form 20-F for the year ended December 31, 2020)

4.1		2014 Warrant Plan (English translation) (incorporated by reference to Exhibit 10.3 to the Company’s Registration Statement on Form F-1 (No. 333-194982))

4.2		Form of Warrant Agreement under 2014 Warrant Plan (English translation) (incorporated by reference to Exhibit 4.6 to the Company’s Registration Statement on Form S-8 (No. 333-197236))

4.3		2015 Warrant Plan (English translation) (incorporated by reference to Exhibit 4.5 to the Company’s Annual Report on Form 20-F for the year ended December 31, 2015)

4.4		Form of Warrant Agreement under 2015 Warrant Plan (English translation) (incorporated by reference to Exhibit 4.4 to the Company’s Registration Statement on Form S-8 (File No. 333-212445))

4.5		Registration Rights Agreement, dated September 15, 2016, among Materialise NV and the Holders party thereto (incorporated by reference to Exhibit 4.8 to the Company’s Registration Statement on Form F-3 (No. 333-258949))

4.6		Share and Loan Purchase and Transfer Agreement, dated October 4, 2017, among Materialise GmbH, Materialise N.V. and the Sellers party thereto (incorporated by reference to Exhibit 4.9 to the Company’s Annual Report on Form 20-F for the year ended December 31, 2018)

4.7		Merger Deed (English translation) (incorporated by reference to Exhibit 2.1 to the Company’s Report on Form 6-K, furnished to the SEC on January 4, 2021)

4.8		Indemnification Agreement, among Materialize NV, Ailanthus NV, Wilfried Vancraen, Hilde Ingelaere and Lunebeke NV (English translation) (incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 6-K, furnished to the SEC on January 4, 2021)

4.9		Letter Agreement Regarding Share Issuance and Registration Rights, dated December 31, 2020, among Materialise NV, Wilfried Vancraen and Hilde Ingelaere (incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 6-K, furnished to the SEC on January 4, 2021)

8.1*		Subsidiaries of Materialise NV

12.1*		Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

12.2*		Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

13.1**		Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350, as adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

13.2**		Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

23.1		Consent of KPMG Bedrijfsrevisoren BV, independent registered public accounting firm

23.2		Consent of BDO Bedrijfsrevisoren, BV, independent registered public accounting firm


101.INS		Inline XBRL Instance Document
101.SCH		Inline XBRL Taxonomy Extension Schema
101.CAL		Inline XBRL Taxonomy Extension Calculation Linkbase
101.DEF		Inline XBRL Taxonomy Extension Definition Linkbase
101.LAB		Inline XBRL Taxonomy Extension Label Linkbase
101.PRE		Inline XBRL Taxonomy Extension Presentation Linkbase
104		Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101).

*	Filed herewith.

**	Furnished herewith.

+	The registrant has omitted portions of the referenced exhibit pursuant to a request for confidential treatment under Rule 24b-2 promulgated under the Exchange Act.

116

Table of Contents

Signatures

The registrant hereby certifies that it meets all of the requirements for filing on Form

20-F

and that it has duly caused and authorized the undersigned to sign this annual report on its behalf.


MATERIALISE NV

By:		/s/ Wilfried Vancraen
Name:		Wilfried Vancraen
Title:		Chief Executive Officer

Date: April 29, 2022

117

Table of Contents

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Consolidated Financial Statements for the Years Ended December 31, 2021, 2020 and 2019


Report of Independent Registered Public Accounting Firm			F-2
Report of Independent Registered Public Accounting Firm (BDOBedrijfsrevisoren BV: Zaventem, Belgium: PCAOBID#1432)			F-4
Consolidated income statements			F-5
Consolidated statements of comprehensive income			F-6
Consolidated statements of financial position			F-7
Consolidated statements of changes in equity			F-9
Consolidated cash flow statements			F-10
Notes to the consolidated financial statements			F-12

F-1

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Shareholders and Board of Directors

Materialise NV:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated statements of financial position of Materialise NV and subsidiaries (the Company) as of December 31, 2021 and 2020, the related consolidated income statements, consolidated statements of comprehensive income, consolidated statements of changes in equity, and consolidated cash flow statements for each of the years in the two-year period ended December 31, 2021 and the related notes (collectively, the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020 and the results of its operations and its cash flows for each of the years in the two-year period ended December 31, 2021, in conformity with International Financial Reporting Standards as issued by the International Accounting Standards Board.

We also have audited the adjustments to the 2019 consolidated financial statements to retrospectively reflect the final accounting for a business combination as described in Notes 2 and 4 to the consolidated financial statements. In our opinion, such adjustments are appropriate and have been properly applied. We were not engaged to audit, review, or apply any procedures to the 2019 consolidated financial statements of the Company other than with respect to the retrospective adjustments and, accordingly, we do not express an opinion or any other form of assurance on the 2019 consolidated financial statements taken as a whole.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2021, based on criteria established in

Internal Control – Integrated Framework (2013)

issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated April 29, 2022 expressed an adverse opinion on the effectiveness of the Company’s internal control over financial reporting.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Impairment analysis for the Engimplan cash generating unit

As discussed in Note 3 to the consolidated financial statements, the Company performs impairment testing on an annual basis and whenever events or changes in circumstances indicate that the carrying amount of a cash generating unit (CGU) may not be recoverable. The Company determined the recoverable amount of the Engimplan CGU based on the value-in-use using a discounted cash flow model. As discussed in Note 5 to the consolidated financial statements, the Company determined that the value-in-use of the Engimplan CGU approximated its carrying value at December 31, 2021.

We identified the evaluation of the impairment analysis for the Engimplan CGU as a critical audit matter. A high degree of subjective auditor judgment and specialized skills and knowledge was required to evaluate the Engimplan CGU’s forecasted year-on-year growth rate of revenue and gross margin, perpetual growth rate and the discount rate, as changes in these assumptions could cause significant changes in the value-in-use of the Engimplan CGU.

F-2

Table of Contents

The following are the primary procedures we performed to address this critical audit matter.

•

We evaluated the design and tested the operating effectiveness of an internal control related to the Company’s impairment process including the evaluation of the assumptions for the year-on-year growth rate of revenue and gross margin, perpetual growth rate and the discount rate used to determine the value-in-use.

•

We evaluated the reasonableness of the year-on-year growth rate of revenue and gross margin by comparing them to the Engimplan CGU’s historical performance.

•

We assessed management’s ability to accurately forecast by comparing forecasts made by management in the prior year to the actual performance of the Engimplan CGU.

•

We evaluated the perpetual growth rate by comparing it to the Engimplan CGU’s historical performance and to external market and industry data.

•

We also involved valuation professionals with specialized skills and knowledge, who assisted in evaluating the Company’s discount rate, by comparing it against a discount rate range that was independently developed using publicly available market data for comparable entities.

KPMG Bedrijfsrevisoren – KPMG Réviseurs d’Entreprises BV/SRL

/s/ Gotwin Victor Jaak Jackers

We have served as the Company’s auditor since 2020.

Zaventem, Belgium

April 29, 2022

F-3

Table of Contents

Report of Independent Registered Public Accounting Firm

Shareholders and Board of Directors

Materialise NV

Leuven, Belgium

Opinion on the Consolidated Financial Statements

We have audited, before the effects of the adjustments to retrospectively apply the final accounting for a business combination that occurred in 2019 as described in Note 4 to the consolidated financial statements as of December 31, 2021, the accompanying consolidated statement of financial position of Materialise NV (the “Company”) and subsidiaries as of December 31, 2019, the related consolidated income statement, statements of comprehensive income, changes in equity, and cash flows for the year ended December 31, 2019, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements, before the effects of the adjustments to retrospectively apply the final accounting for a business combination that occurred in 2019 as described in Note 4 to the consolidated financial statements as of December 31, 2021, present fairly, in all material respects, the financial position of the Company and subsidiaries at December 31, 2019, and the results of its operations and its cash flows for the year ended December 31, 2019, in conformity with International Financial Reporting Standards as issued by the International Accounting Standards Board.

We were not engaged to audit, review, or apply any procedures to the adjustments to retrospectively apply the final accounting for a business combination that occurred in 2019 as described in Note 4 to the consolidated financial statements as of December 31, 2021 and, accordingly, we do not express an opinion or any other form of assurance about whether such adjustments are appropriate and have been properly applied. Those adjustments were audited by KPMG Bedrijfsrevisoren—KPMG Réviseurs d’Entreprises BV/SRL.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.

Our audit included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audit provides a reasonable basis for our opinion.

/s/ Veerle Catry

BDO Bedrijfsrevisoren BV

Represented by Veerle Catry

We have served as the Company’s auditor from 2014 through 2020.

Zaventem, Belgium

April 30, 2020

F-4

Table of Contents

Consolidated income statements


			For the year ended December 31,
in 000€, except per share data	Notes		2021			2020*			2019
Revenue		22.1		205,450			170,449			196,679
Cost of sales		22.2		(87,278	)		(76,446	)		(87,052	)
Gross profit				118,172			94,003			109,627
Research and development expenses		22.3		(26,891	)		(27,104	)		(23,348	)
Sales and marketing expenses		22.4		(49,151	)		(44,636	)		(52,989	)
General and administrative expenses		22.5		(33,315	)		(29,337	)		(31,786	)
Net other operating income		22.6		3,402			2,436			5,432
Operating profit (loss)				12,217			(4,638	)		6,936
Financial expenses		22.8		(4,101	)		(5,995	)		(3,682	)
Financial income		22.9		5,620			2,452			1,377
Share in loss of joint venture, after tax		8		—			(39	)		(392	)
Profit (loss) before taxes				13,736			(8,221	)		4,239
Income tax benefit/(expense)		22.1		(591	)		1,028			(2,595	)
Net profit (loss) for the year				13,145			(7,193	)		1,644
Net profit (loss) attributable to:
The owners of the parent				13,154			(7,044	)		1,586
Non-controlling interest				(9	)		(148	)		58
Earnings per share attributable to the owners of the parent
Basic		23		0.23			(0.13	)		0.03
Diluted		23		0.23			(0.13	)		0.03

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-12

to page

F-77

form an integral part of these consolidated financial statements.

F-5

Table of Contents

Consolidated statements of comprehensive income


		For the year ended December 31,
in 000€		2021			2020*			2019
Net profit (loss) for the year			13,145			(7,193	)		1,644
Other comprehensive (loss)/ income
Items that are or may be reclassified subsequently to profit or loss
Exchange differences on translation of foreign operations			1,565			(6,176	)		244
Items that will not be reclassified to profit or loss
Fair value adjustment through OCI—Equity instruments	10		(3,443	)		489			—
Other comprehensive (loss)/ income, net of taxes			(1,878	)		(5,687	)		244
Total comprehensive (loss)/ income for the year, net of taxes			11,267			(12,880	)		1,888
Total comprehensive (loss)/ income attributable to:
The owners of the parent			11,276			(11,817	)		2,041
Non-controlling interest			(9	)		(1,063	)		(153	)

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-14

to pag

F-78

form an integral part of these consolidated financial statements.

F-6

Table of Contents

Consolidated statements of financial position


			As of December 31,
in 000€	Notes		2021		2020*		2019
Assets
Non-current assets
Goodwill		5		18,726		18,599		19,607
Intangible assets		6		31,668		32,981		27,395
Property, plant & equipment		7		84,451		88,267		91,006
Right-of-use assets		7		9,054		10,996		10,586
Investments in joint ventures		8		0		0		39
Deferred tax assets		22.10		227		201		192
Investments in convertible loans		10		3,560		6,203		2,750
Investments in non-listed equity instruments		10		399		3,842		3,046
Other non-current assets		10		7,519		4,093		3,594
Total non-current assets				155,604		165,182		158,215
Current assets
Inventories and contracts in progress		9		11,295		10,043		12,696
Trade receivables		11		41,541		30,871		40,977
Other current assets		10		8,940		8,290		8,616
Cash and cash equivalents		12		196,028		111,538		128,897
Total current assets				257,804		160,742		191,186
Total assets				413,408		325,924		349,401

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-14

to page

F-78

form an integral part of these consolidated financial statements.

F-7

Table of Contents

Consolidated statements of financial position


			As of December 31,
in 000€	Notes		2021			2020*			2019
Equity and liabilities
Equity
Share capital		13		4,489			4,096			3,066
Share premium		13		233,872			141,274			138,090
Retained earnings		13		965			(7,316	)		(272	)
Other reserves		13		(6,749	)		(4,871	)		(1,378	)
Equity attributable to the owners of the parent				232,577			133,183			139,506
Non-controlling interest		13		1			0			3,276
Total equity				232,578			133,183			142,782
Non-current liabilities
Loans & borrowings		15		72,637			90,502			104,673
Lease liabilities		15		5,268			7,086			6,427
Deferred tax liabilities		22.10		4,371			4,983			5,747
Deferred income		18		4,952			5,327			5,031
Other non-current liabilities		16		2,167			398			696
Total non-current liabilities				89,395			108,295			122,574
Current liabilities
Loans & borrowings		15		17,849			13,984			13,389
Lease liabilities		15		3,353			3,539			3,449
Trade payables				20,171			17,698			18,517
Tax payables		17		783			974			3,363
Deferred income		18		33,307			29,555			27,641
Other current liabilities		19		15,972			18,695			17,686
Total current liabilities				91,435			84,445			84,045
Total equity and liabilities				413,408			325,924			349,401

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-14

to page

F-78

form an integral part of these consolidated financial statements.

F-8

Table of Contents

Consolidated statements of changes in equity


		Attributable to the owners of the parent
in 000€	Notes	Share capital		Share premium		Retained earnings			Other reserves			Total			Non- controlling interest			Total equity
At January 1, 2021 as reported*			4,096		141,274		(7,395	)		(4,871	)		133,104			0			133,104
Completion of accounting for Materialise Motion business combination	4		0		0		79			0			79			0			79
At January 1, 2021 As adjusted *	2		4,096		141,274		(7,316	)		(4,871	)		133,183			0			133,183
Net profit (loss) for the year			0		0		13,154			0			13,154			(9	)		13,145
Other comprehensive income (loss)			0		0		0			(1,878	)		(1,878	)		0			(1,878	)
Total comprehensive income (loss)			0		0		13,154			(1,878	)		11,276			(9	)		11,267
Capital increase through public offering	13		371		90,235		(4,873	)		0			85,733			0			85,733
Capital increase through exercise of warrants	13		22		2,322		0			0			2,344			0			2,344
Incorporation NCI Tianjin Zhenyuan Materialise Medical Technology Ltd	13		0		0		0			0			0			10			10
Equity-settled share-based payment expense	14		0		41		0			0			41			0			41
At December 31, 2021			4,489		233,872		965			(6,749	)		232,577			1			232,578

*	The year 2020 has been adjusted retrospectively to refl e ct the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-14

to page

F-78

form an integral part of these consolidated financial statements.


			Attributable to the owners of the parent
in 000€	Notes		Share capital		Share premium		Retained earnings			Other reserves			Total			Non- controlling interest			Total equity
At January 1, 2020				3,066		138,090		(211	)		(1,378	)		139,567			3,107			142,675
Net profit (loss) for the year				0		0		(7,124	)		0			(7,124	)		(148	)		(7,272	)
Other comprehensive income (loss)				0		0		0			(4,772	)		(4,772	)		(915	)		(5,687	)
Total comprehensive income (loss)				0		0		(7,124	)		(4,772	)		(11,896	)		(1,063	)		(12,959	)
Capital increase through conversion of convertible bonds		13		1,000		0		0			0			1,000			0			1,000
Capital increase through exercise of warrants		13		30		3,082		0			0			3,112			0			3,112
Acquisition NCI Engimplan				0		0		0			1,279			1,279			(2,213	)		(934	)
Equity-settled share-based payment expense		14		0		103		0			0			103			0			103
At December 31, 2020				4,096		141,274		(7,395	)		(4,871	)		133,104			0			133,104


			Attributable to the owners of the parent
in 000€	Notes		Share capital		Share premium		Retained earnings			Other reserves			Total		Non- controlling interest			Total equity
At January 1, 2019				3,050		136,637		(1,857	)		(1,841	)		135,989		0			135,989
Net profit (loss) for the year				0		0		1,646			0			1,646		78			1,724
Other comprehensive income (loss)				0		0		0			456			456		(211	)		245
Total comprehensive income (loss)				0		0		1,646			456			2,102		(133	)		1,969
Capital increase through exercise of warrants		13		16		1,252		0			0			1,268		0			1,268
Acquisition NCI Engimplan				0		0		0			0			0		3,240			3,240
Equity-settled share-based payment expense		14		0		201		0			7			208		0			208
At December 31, 2019				3,066		138,090		(211	)		(1,378	)		139,567		3,107			142,675

F-9

Table of Contents

Consolidated cash flow statements


			For the year ended December 31,
in 000€	Notes		2021			2020*			2019
Operating activities
Net profit (loss) for the year*				13,145			(7,193	)		1,644
Non-cash and operational adjustments
Depreciation of property, plant & equipment		7		15,574			14,932			14,419
Amortization of intangible assets		6		4,975			4,742			4,859
Impairment of goodwill and intangible assets		5; 6		177			4,606			0
Share-based payment expense		14		(1,036	)		752			302
Loss (gain) on disposal of property, plant & equipment		7		210			10			165
Movement in provisions				99			137			138
Movement in reserve for bad debt and slow moving inventory				255			516			121
Financial income		22.9		(5,620	)		(2,300	)		(1,377	)
Financial expense		22.8		4,101			5,821			3,682
Impact of foreign currencies				40			61			(176	)
Share in loss of joint venture (equity method)		8		0			39			392
Income taxes and deferred taxes*		22.10		591			(1,049	)		2,595
Fair value adjustment		4; 10		0			(1,093	)		0
Other				0			0			(245	)
Working capital adjustment and income tax paid
Decrease (increase) in trade receivables and other current assets				(10,920	)		9,205			216
Decrease (increase) in inventories and contracts in progress				(1,423	)		2,724			(745	)
Increase in trade payables and other payables				6,453			583			4,196
Income tax paid				(1,152	)		(2,618	)		(2,139	)
Interest received				376			103			355
Net cash flow from operating activities				25,845			29,978			28,402

*	The year 2020 has been adjusted retrospectively to reflect the fin a l accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-14

to page

F-78

form an integral part of these consolidated financial statements.

F-10

Table of Contents

Consolidated cash flow statements


			For the year ended December 31,
in 000€	Notes		2021			2020*			2019
Investing activities
Purchase of property, plant & equipment		7		(7,934	)		(11,032	)		(13,472	)
Purchase of intangible assets		6		(3,788	)		(6,618	)		(2,193	)
Proceeds from the sale of property, plant, equipment and intangibles (net)				462			552			278
Acquisition of subsidiary (net of cash)		4		(875	)		(8,031	)		(6,331	)
Investments in joint-ventures / shares		8		0			0			(875	)
Convertible loan granted		10		(999	)		(2,836	)		(2,743	)
Other equity investments in non-listed entities		10		0			(300	)		(281	)
Interest received				—			—			—
Net cash flow used in investing activities				(13,134	)		(28,265	)		(25,617	)
Financing activities
Proceeds from loans & borrowings		15		0			0			29,000
Repayment of loans & borrowings		15		(14,277	)		(13,736	)		(12,126	)
Repayment of leases		15		(3,775	)		(3,640	)		(5,283	)
Capital increase in parent company		13		88,117			4,112			1,268
Direct attributable expense capital increase		13		0			0			0
Interest paid				(2,326	)		(2,268	)		(2,286	)
Other financial income (expense), net				3,417			(1,356	)		208
Net cash flow from financing activities				71,156			(16,888	)		10,781
Net increase/(decrease) of cash and cash equivalents				83,867			(15,175	)		13,566
Cash and cash equivalents at beginning of the year		12		111,538			128,897			115,506
Exchange rate differences on cash and cash equivalents				624			(2,184	)		(175	)
Cash and cash equivalents at end of the year		12		196,028			111,538			128,897

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Matrialise Motion. See additional information in Notes 2 and 4.

The accompanying notes from page

F-14

to page

F-78

form an integral part of these consolidated financial statements.

Table of Contents

Notes to the consolidated financial statements

1 Corporate information

Materialise NV is a limited liability company with its office at Technologielaan 15, 3001 Leuven, Belgium. The consolidated financial statements comprise Materialise NV (the “Company” or “Parent”) and its subsidiaries (collectively, the “Group” or “we,” “us” and “our”). See Note 28 for a list of subsidiaries of the Company.

We are a leading provider of additive manufacturing and medical software and of sophisticated 3D printing services. Our products and services are offered through a market oriented organization that is active across three principal market segments: (i) Materialise Software, (ii) Materialise Medical, and (iii) Materialise Manufacturing. We sell our products and services in Europe, the Americas, Africa and Asia-Pacific.

The consolidated financial statements of the Group for the year ended December 31, 2021 were approved and authorized for issue on April 27, 2022 in accordance with a resolution of the Company’s board of directors.

2 Basis of preparation

The consolidated financial statements of the Group for the three years ended December 31, 2021, 2020 and 2019 are prepared in accordance with the International Financial Reporting Standards (IFRS) as issued by the International Accounting Standards Board (IASB) (collectively “IFRS”).

These consolidated financial statements have been prepared on a historical cost basis, except for the assets and liabilities that have been acquired as part of a business combination, which have been initially recognized at fair value, and certain financial assets such as the

non-listed

equity instruments and the convertible loan receivable which are both included in the other

non-current

assets and the share appreciation rights are measured at fair value.

The financial statements are prepared on a going concern basis. The consolidated financial statements are presented in thousands of euros (K€ or thousands of €) and all “currency” values are rounded to the nearest thousand (€000), except when otherwise indicated.

The preparation of financial statements in compliance with IFRS requires the use of certain critical accounting estimates. It also requires Group management to exercise judgment in applying the Group’s accounting policies. The areas where significant judgment and estimates have been made in preparing the financial statements and their effect are disclosed in Note 3.

Impact of

COVID-19

on our Business

In 2020, the vast majority of the businesses addressed by our segments were adversely affected by the effects of the

COVID-19

pandemic, which had a negative impact on our results of operations. These effects have faded out in 2021, although we continued to experience a negative impact from the COVID-19 pandemic in certain business lines that have not yet recovered in full. In particular, during the first half of 2021, order intake levels from automotive, aerospace, and certain industrial clients in our Materialise Software and Materialise Manufacturing segments remained below the pre-pandemic 2019 levels. To-date, we have not incurred significant bad debt or major delays in trade payments as a result of the ongoing COVID-19 pandemic.

New standards, interpretations and amendments adopted by the Group

The following amendments and interpretations issued by the IASB and IFRIC apply for the first time in 2021, but do not have a significant impact on the consolidated financial statements of the Group.

•

Amendments to IFRS 9, IAS 39, IFRS 7, IFRS 4 and IFRS 16 Interest Rate Benchmark Reform – Phase 2 (issued on 27 August 2020)

•

Amendments to IFRS 4 Insurance Contracts – deferral of IFRS 9 (issued on 25 June 2020)

•

Amendments to IFRS 16 Leases: Covid-19-Related Rent Concessions beyond 30 June 2021 (issued on 31 March 2021) – effective as from 1 April 2021

A number of new standards, amendments to standards and interpretations are not yet effective for the year ended 31 December 2021, and have not been applied in preparing these consolidated financial statements. The amendments are not expected to have a material impact on the Group’s consolidated financial statements.

Amendments to IAS 1 Presentation of Financial statements: Classification of Liabilities as Current or

Non-current

, issued on 23 January 2020, clarify a criterion in IAS 1 for classifying a liability as

non-current:

the requirement for an entity to have the right to defer settlement of the liability for at least 12 months after the reporting period.

The amendments:

•

specify that an entity’s right to defer settlement must exist at the end of the reporting period;

F-12

Table of Contents

•

clarify that classification is unaffected by management’s intentions or expectations about whether the entity will exercise its right to defer settlement;

•

clarify how lending conditions affect classification; and

•

clarify requirements for classifying liabilities an entity will or may settle by issuing its own equity instruments.

On July 15, 2020, the IASB issued Classification of Liabilities as Current or

Non-current

— Deferral of Effective Date (Amendment to IAS 1) deferring the effective date of the January 2020 amendments to IAS 1 by one year to annual reporting periods beginning on or after January 1, 2023 with early application permitted.

The IASB has published a new exposure draft on the topic on 19 November 2021.

Amendments to IFRS 3 Business Combinations; IAS 16 Property, plant and Equipment; IAS 37 Provisions, Contingent Liabilities and Contingent Assets as well as Annual improvements

, issued on 14 May 2020, include several narrow-scope amendments which are changes that clarify the wording or correct minor consequences, oversights or conflicts between requirements in the Standards:

•

Amendments to IFRS 3 Business Combinations

update a reference in IFRS 3 to the Conceptual Framework for Financial Reporting without changing the accounting requirements for business combinations.

•

Amendments to IAS 16 Property, Plant and Equipment

prohibit a company from deducting from the cost of property, plant and equipment amounts received from selling items produced while the company is preparing the asset for its intended use. Instead, a company will recognize such sales proceeds and related cost in profit or loss. The amendments also clarify that testing whether an item of PPE is functioning properly means assessing its technical and physical performance rather than assessing its financial performance.

•

Amendments to IAS 37 Provisions, Contingent Liabilities and Contingent Assets

specify which costs a company includes when assessing whether a contract will be loss-making. The amendments clarify that the ‘costs of fulfilling a contract’ comprise both: the incremental costs; and an allocation of other direct costs.

•

Annual Improvements to IFRS Standards 2018–2020 make minor amendments to IFRS 1 First-time Adoption of International Financial Reporting Standards, IFRS 9 Financial Instruments, IAS 41 Agriculture and the Illustrative Examples accompanying IFRS 16 Leases.

These amendments are effective for annual periods beginning on or after 1 January 2022 with early application permitted.

Amendments to IAS 1 Presentation of Financial Statements and IFRS Practice Statement 2: Disclosure of Accounting policies

, issued on 12 February 2021, include narrow-scope amendments to improve accounting policy disclosures so that they provide more useful information to investors and other primary users of the financial statements. The amendments to IAS 1 require companies to disclose their material accounting policy information rather than their significant accounting policies. The amendments to IFRS Practice Statement 2 provide guidance on how to apply the concept of materiality to accounting policy disclosures.

These amendments are effective for annual periods beginning on or after 1 January 2023 with early application permitted.

Amendments to IAS 8 Accounting policies, Changes in Accounting Estimates and Errors: Definition of Accounting Estimates

, issued on 12 February 2021, clarify how companies should distinguish changes in accounting policies from changes in accounting estimates. The distinction is important because changes in accounting estimates are applied prospectively only to future transactions and other future events, but changes in accounting policies are generally also applied retrospectively to past transactions and other past events.

These amendments are effective for annual periods beginning on or after 1 January 2023 with early application permitted.

Amendments to IAS 12 Income Taxes: Deferred Tax related to Assets and Liabilities arising from a Single Transaction

, issued on 7 May 2021, clarifies how companies should account for deferred tax on transactions such as leases and decommissioning obligations. IAS 12 Income Taxes specifies how a company accounts for income tax, including deferred tax, which represents tax payable or recoverable in the future. In specified circumstances, companies are exempt from recognizing deferred tax when they recognize assets or liabilities for the first time. Previously, there had been some uncertainty about whether the exemption applied to transactions such as leases and decommissioning obligations—transactions for which companies recognize both an asset and a liability. The amendments clarify that the exemption does not apply and that companies are required to recognize deferred tax on such transactions. The aim of the amendments is to reduce diversity in the reporting of deferred tax on leases and decommissioning obligations.

F-13

Table of Contents

These amendments are effective for annual periods beginning on or after 1 January 2023 with early application permitted.

Retroactive adjustments in the reporting year 2020

The Group has adjusted retrospectively the reporting year 2020 for the following impacts:

•

Our consolidated financial statements for the year ended December 31, 2020 appearing in our Annual Report on Form

20-F,

as filed with the U.S. Securities and Exchange Commission on April 30, 2021 (the “FY 2020 Form

20-F”),

included provisional accounting for the Materialise Motion (formerly RS Print) business combination. At approval of our 2020 consolidated financial statements by the Board, the deferred tax analysis was not yet finalized.

As of

October 2021, we completed the analysis of deferred taxes in respect of the Materialise Motion business combination, with corresponding adjustments to goodwill and deferred taxes. The impact has been accounted for as retrospective adjustments to our consolidated statement of financial position as of December 31, 2020 and our consolidated income statement for the year ended December 31, 2020. The adjustment results in a decrease in deferred tax liabilities of K€ 1,822, an increase in deferred income tax benefit of K€ 79, a decrease in goodwill of K€ 1,743 and an increase in consolidated reserves of K€ 79.

We refer to Note 4 for a detailed discussion of the Materialise Motion business combination.

The impact of the retrospective adjustments on the consolidated statement of financial position as of December 31, 2020 and the consolidated income statement for the year ended December 31, 2020 is as follows:


	As of December 31, 2020
Retrospective adjustment impact on statement of financial position in 000€	As previously reported		IFRS 3 Materialise Motion			As adjusted
Assets
Non-current assets
Goodwill		20,342		(1,743	)		18,599
Intangible assets		32,981		—			32,981
Property, plant & equipment		88,267		—			88,267
Right-of-use assets		10,996		—			10,996
Investments in joint ventures		—		—			—
Deferred tax assets		201		—			201
Investments in convertible loans		6,203		—			6,203
Investments in non-listed equity instruments		3,842		—			3,842
Other non-current assets		4,093		—			4,093
Total non-current assets		166,925		(1,743	)		165,182
Current assets
Inventories and contracts in progress		10,043		—			10,043
Trade receivables		30,871		—			30,871
Other current assets		8,290		—			8,290
Cash and cash equivalents		111,538		—			111,538
Total current assets		160,742		—			160,742
Total assets		327,667		(1,743	)		325,924

F-14

Table of Contents


	As of December 31, 2020
	As previously reported			IFRS 3 Materialise Motion			As adjusted
Equity and liabilities
Equity
Share capital		4,096			—			4,096
Share premium		141,274			—			141,274
Consolidated reserves		(7,395	)		79			(7,316	)
Other comprehensive loss		(4,871	)		—			(4,871	)
Equity attributable to the owners of the parent		133,104			79			133,183
Non-controlling interest		—			—			—
Total equity		133,104			79			133,183
Non-current liabilities
Loans & borrowings		90,502			—			90,502
Lease liabilities		7,086			—			7,086
Deferred tax liabilities		6,805			(1,822	)		4,983
Deferred income		5,327			—			5,327
Other non-current liabilities		398			—			398
Total non-current liabilities		110,118			(1,822	)		108,296
Current liabilities
Loans & borrowings		13,984			—			13,984
Lease liabilities		3,539			—			3,539
Trade payables		17,698			—			17,698
Tax payables		974			—			974
Deferred income		29,555			—			29,555
Other current liabilities		18,695			—			18,695
Total current liabilities		84,445			—			84,445
Total equity and liabilities		327,667			(1,743	)		325,924


	For the year ended December 31, 2020
Retrospective adjustment impact on income statement in 000€	As previously reported			IFRS 3 Materialise Motion		As adjusted
Revenue		170,449			—		170,449
Cost of sales		(76,446	)		—		(76,446	)
Gross profit		94,003			—		94,003
Research and development expenses		(27,104	)		—		(27,104	)
Sales and marketing expenses		(44,636	)		—		(44,636	)
General and administrative expenses		(29,337	)		—		(29,337	)
Net other operating income / (expenses)		2,436			—		2,436
Operating profit (loss)		(4,639	)		—		(4,639	)
Financial expenses		(5,995	)		—		(5,995	)
Financial income		2,453			—		2,453
Share in loss of joint venture		(39	)		—		(39	)
Loss before taxes		(8,221	)		—		(8,221	)
Income taxes		949			79		1,028
Net loss for the year		(7,272	)		79		(7,193	)
Net loss attributable to:
The owners of the parent		(7,124	)		79		(7,045	)
Non-controlling interest		(148	)		—		(148	)

F-15

Table of Contents

3 Summary of significant accounting policies

Basis for consolidation

The consolidated financial statements comprise the financial statements of the Group and its subsidiaries.

Entities are fully consolidated from the date of acquisition, which is the date when the Group obtains control, and continue to be consolidated until the date when such control ceases. The financial statements of the entities are prepared for the same reporting period as the parent company, using consistent accounting policies. All intra-Group balances, transactions, unrealized gains and losses resulting from intra-Group transactions and dividends are fully eliminated.

The Group attributes profit or loss and each component of other comprehensive income to the owners of the parent company and to the

non-controlling

interest based on present ownership interests, even if the results in the

non-controlling

interest have a negative balance.

A change in the ownership interest of a subsidiary, without a loss of control, is accounted for as an equity transaction. If the Group loses control over the subsidiary, it will derecognize the assets (including goodwill) and liabilities of the subsidiary, any

non-controlling

interest and the other components of equity related to the subsidiary. Any surplus or deficit arising from the loss of control is recognized in profit or loss. If the Group retains an interest in the previous subsidiary, then such interest is measured at fair value at the date the control is lost.

The proportion allocated to the parent and

non-controlling

interests in preparing the consolidated financial statements is determined based solely on present ownership interests.

As of November 9, 2020, the Group acquired full ownership of Materialise Motion (formerly RS Sprint), and Materialise Motion is included in the consolidated financial statements of the Group as from that date, after having been accounted for as a joint venture under the equity method up to November 8, 2020 – see Note 8.

Non-controlling

interests

The Group has the choice, on a transaction by transaction basis, to initially recognize any

non-controlling

interest in the acquiree which is a present ownership interest and entitles its holders to a proportionate share of the entity’s net assets in the event of liquidation at either acquisition date fair value or, at the present ownership instruments’ proportionate share in the recognized amounts of the acquiree’s identifiable net assets. Other components of

non-controlling

interest such as outstanding share options are generally measured at fair value. The Group has not elected to take the option to use fair value in acquisitions completed to date. As of December 31, 2021, the only

non-controlling

interest relates to Tianjin Zhenyuan Materialise Medical Technology Ltd., a subsidiary that Materialise, together with Zhenyuan (Tianjin) Medical Appliances Technology Co., Ltd., incorporated on June 22, 2021. Materialise holds 51% of the shares of this subsidiary. See also Note 4.

Foreign currency translation

The Group’s consolidated financial statements are presented in euros, which is also the parent company’s functional currency. For each entity, the Group determines the functional currency, and items included in the financial statements of each entity are measured using the functional currency.

Financial statements of foreign subsidiaries

Foreign subsidiaries use the local currencies of the country where they operate. The statement of financial position is translated into euro at the closing rate on the reporting date and their income statement is translated at the average exchange rate at each

month-end.

Differences resulting from the translation of the financial statements of said subsidiaries are recognized in other comprehensive income as “exchange differences on translation of foreign operations”.

Foreign currency transactions

Transactions denominated in foreign currencies are translated into euro at the exchange rate of the previous day. Monetary items in the statement of financial position are translated at the closing rate at each reporting date and the relevant translation adjustments are recognized in financial or operating result depending on its nature.

Business combinations and goodwill

Business combinations are accounted for using the acquisition method at the acquisition date, which is the date at which the Group obtains control over the entity. The cost of an acquisition is measured as the amount of the consideration transferred to the seller, measured at the acquisition date fair value, and the amount of any

non-controlling

interest in the acquiree.

The Group measures goodwill initially at cost at the acquisition date, being:

•

the fair value of the consideration transferred to the seller, plus

•

the amount of any

non-controlling

interest in the acquiree, plus

F-16

Table of Contents

•

if the business combination is achieved in stages, the fair value of the existing equity interest in the acquiree

re-measured

at the acquisition date, less

•

the fair value of the net identifiable assets acquired and assumed liabilities

Goodwill is recognized with any impairment in carrying value being charged to the consolidated income statement. Where the fair value of identifiable assets, liabilities and contingent liabilities exceeds the fair value of consideration paid, the excess is credited in full to the consolidated income statement on acquisition date.

Acquisition costs incurred are expensed and included in general and administrative expenses.

Any contingent consideration to be transferred by the acquirer will be recognized at fair value at the acquisition date. Subsequent changes to the fair value of the contingent consideration, which is deemed to be an asset or liability, will be recognized in profit or loss. If the contingent consideration is classified as equity, it is not

re-measured

until it is finally settled within equity.

Acquisition of

non-controlling

interests are accounted for as an equity transaction.

Investments in joint ventures

As at December 31, 2021, Materialise has 0 investments in joint ventures.

F-17

Table of Contents

Property, plant & equipment

Property, plant and equipment is stated at cost, net of accumulated depreciation and/or accumulated impairment losses, if any. Such cost includes borrowing costs directly attributable to construction projects if the asset necessarily takes a substantial period of time to get ready for its intended use, it is probable that they will result in future economic benefits to the Group and the cost can be measured reliably. When significant parts of property, plant and equipment are required to be replaced at intervals, the Group recognizes such parts as individual assets with specific useful lives and depreciates them accordingly. Likewise, when a major inspection is performed, its cost is recognized in the carrying amount of the property, plant and equipment as a replacement if the recognition criteria are satisfied. All other repair and maintenance costs are recognized in the income statement as incurred.

Depreciation is calculated on a straight-line basis over the estimated useful lives of the assets as follows:


• Buildings:		20-30 years
• Machinery:		5-12 years
• IT assets:		3-5 years
• Fixtures & Furniture:		10-15 years
• Vehicles:		2-4 years
• Leasehold Building Improvements:		10 years

Land is not depreciated.

An item of property, plant and equipment and any significant part initially recognized is derecognized upon disposal or when no future economic benefits are expected from its use or disposal. Any gain or loss arising on derecognition of the asset (calculated as the difference between the net disposal proceeds and the carrying amount of the asset) is included in the income statement when the asset is derecognized.

The assets’ residual values, useful lives and methods of depreciation are reviewed at each financial

year-end

and adjusted prospectively, if appropriate.

Right-of-use

assets and related liabilities

Right-of-use

assets:

The Company recognizes

right-of-use

assets at the commencement date of the lease (i.e., the date the underlying asset is available for use).

Right-of-use

assets are measured at cost, less any accumulated depreciation and impairment losses, and adjusted for any remeasurement of lease liabilities. The cost of

right-of-use

assets includes the amount of lease liabilities recognized, initial direct costs incurred, the estimated cost of any asset retirement obligation and lease payments made at or before the commencement date less any lease incentives received. Unless the Company is reasonably certain to obtain ownership of the leased asset at the end of the lease term, the recognized

right-of-use

assets are depreciated on a straight-line basis over the shorter of its estimated useful life and the lease term:


• Property leased Assets:		Lease terms up to 10 years or useful life of 10-15 years when reasonably certain that ownership will be obtained at the end of the lease
• Leased machines:		Lease terms up to 10 years or useful life of 5-10 years when reasonably certain that ownership will be obtained at the end of the lease
• Leased vehicles:		Lease terms up to 4 years or useful life of 4 years when reasonably certain that ownership will be obtained at the end of the lease

Right-of-use

assets are subject to impairment.

Lease liabilities:

At the commencement date of the lease, the Company recognizes lease liabilities measured at the present value of lease payments to be made over the lease term. The lease payments include fixed payments (including in substance fixed payments) less any lease incentives receivable, variable lease payments that depend on an index or a rate, and amounts expected to be paid under residual value guarantees. The lease payments also include the exercise price of a purchase option reasonably certain to be exercised by the Company and payments of penalties for terminating a lease, if the lease term reflects the Company exercising the option to terminate. The variable lease payments that do not depend on an index or a rate are recognized as expense in the period on which the event or condition that triggers the payment occurs. In calculating the present value of lease payments, the Company uses the incremental borrowing rate at the lease commencement date if the interest rate implicit in the lease is not readily determinable. After the commencement date, the amount of lease liabilities is measured at amortized cost using the effective interest rate method.

In addition, the carrying amount of lease liabilities is remeasured when there is a change in future lease payments arising from a change in an index or rate, if there is a change in the Group’s estimate of the amount expected to be payable under a residual value guarantee, if the Group changes its assessment of whether it will exercise a purchase, extension or termination option or if there is a revised

in-substance

fixed lease payment. When the lease liability is remeasured in this way, a corresponding adjustment is made to the carrying amount of the

right-of-use

asset, or is recorded in profit or loss if the carrying amount of the

right-of-use

asset has been reduced to zero.

F-18

Table of Contents

Short-term leases and leases of

low-value

assets:

The Company applies the short-term lease recognition exemption to its short-term leases of machinery and equipment (i.e., those leases that have a lease term of 12 months or less from the commencement date and do not contain a purchase option) however this exemption is not applied for property leases. It also applies the lease of

low-value

assets recognition exemption to leases of office equipment that are considered of low value (i.e., below € 5k). Lease payments on short-term leases and

low-value

assets are recognized in the income statement when incurred.

Borrowing costs

Borrowing costs directly attributable to the acquisition, construction or production of a qualified asset that necessarily takes a substantial period of time to prepare for its intended use or sale are capitalized as part of the cost of the respective assets. All other borrowing costs are expensed in the period they occur. Borrowing costs consist of interest and other costs that an entity incurs in connection with the borrowing of funds.

Research and development

Research and development includes the costs incurred by activities related to the development of software solutions (new products, updates and enhancements), guides and other products.

Development activities involve the application of research findings or other knowledge to a plan or a design of new or substantially improved (software) products before the start of the commercial use.

Development expenditures on an individual project are recognized as an intangible asset when the Group can demonstrate:

•

the technical feasibility of completing the intangible asset so that the asset will be available for use or sale;

•

its intention to complete and its ability to use or sell the asset;

•

how the asset will generate future economic benefits;

•

the availability of resources to complete the asset; and

•

the ability to measure reliably the expenditure during development.

The Group has determined that the conditions for recognizing internally generated intangible assets from proprietary software, guide and other product development activities are not met until shortly before the products are available for sale, unless either (i) the Group has strong evidence that the above criteria are met and a detailed business plan is available showing the asset will on a reasonable basis generate future economic benefits or (ii) the development is done based upon specific request of the customer, it is highly likely that the Group will be able to market the product also to other parties than the customer, the development is subject to an agreement and the substance of the agreement is that the customer reimburses the Group for a significant portion, but not all, of the development expenses incurred. As such, development expenditures not satisfying the above criteria and expenditures on the research phase of internal projects are recognized in the consolidated income statement as incurred. Internally generated intangible assets from proprietary software are amortized over their useful lives, starting from the moment they are ready for use/available for sale.

Following initial recognition of the development expenditure as an asset, the asset is carried at cost less any accumulated amortization and accumulated impairment losses. Amortization of the asset begins when development is complete and the asset is available for use. It is amortized over the period of expected future benefit, which is determined on a

project-by-project

basis. Amortization is recorded in research and development expenditure. During the period of development, the asset is tested for impairment at least annually or whenever there is an indication of impairment.

Intangible assets other than goodwill and capitalized development expenditures

Intangible assets comprise acquired technology and customer portfolio, patents and licenses and technology and customers acquired in connection with business combinations. Those intangible assets are measured on initial recognition at cost, except for the acquired technology and customers arising from business combinations, which are measured initially at fair value. Following initial recognition, intangible assets other than goodwill are carried at cost less any accumulated amortization and accumulated impairment losses, if any.

The useful life of the intangible assets is as follows:


• Software:		3 years;
• Perpetual licences for ERP & front end software :		10 years;
• Software with subscription license :		subscription term
• Patents and licenses:		10 years;
• Acquired customers and Technology:		5-20 years;
• Order Backlog:		Period over which orders will be completed.

The intangible assets with finite lives are amortized over their useful economic life and assessed for impairment whenever there is an indication that the intangible asset may be impaired. The amortization period and the amortization method for an intangible asset with a finite useful life are reviewed at least at the end of each reporting period. The amortization expense on intangible assets with finite lives acquired through business combination is recognized in the consolidated income statement in the line “net other operating income”.

F-19

Table of Contents

Impairment of goodwill and other

non-financial

assets (excluding inventories and deferred tax assets)

Impairment tests on goodwill and other intangible assets with indefinite useful economic lives, assets under construction or capitalized development expenses which are not amortized yet, are undertaken annually at the financial year end. Other

non-financial

assets and goodwill are subject to impairment tests whenever events or changes in circumstances indicate that their carrying amount may not be recoverable. Where the carrying value of an asset exceeds its recoverable amount (i.e. the higher of value in use and fair value less costs to sell), the asset is written down accordingly.

Where it is not possible to estimate the recoverable amount of an individual asset, the impairment test is carried out on the smallest Group of assets to which it belongs for which there are separately identifiable cash flows: its cash generating units (CGUs). Goodwill is allocated on initial recognition to each of the Group’s CGUs that are expected to benefit from the synergies of the combination giving rise to the goodwill.

The Group bases its impairment calculation on detailed budgets and forecast calculations, which are prepared separately for each of the Group’s CGUs to which the individual assets are allocated. These budgets and forecast calculations generally cover a period of five years. For longer periods, a long-term growth rate is calculated and applied to future cash flows projected after the fifth year.

Impairment charges are included in profit or loss, except, where applicable, to the extent they reverse gains previously recognized in other comprehensive income. An impairment loss recognized for goodwill is not reversed.

Where goodwill forms part of a cash-generating unit and part of the operation within that unit is disposed of, the goodwill associated with the operation disposed of is included in the carrying amount of the operation when determining the gain or loss on disposal of the operation. Goodwill disposed of in this circumstance is measured based on the relative values of the operation disposed of and the portion of the cash-generating unit retained.

Inventories and Contracts in progress

Inventories are valued at the lower of cost and net realizable value. Costs incurred in bringing each product to its present location and condition are accounted for as follows:

•

Raw materials: purchase cost on a first in, first out basis; and

•

Finished goods and work in progress: cost of direct materials and labor and a proportion of manufacturing overheads based on the normal operating capacity, but excluding borrowing costs.

Net realizable value is the estimated selling price in the ordinary course of business, less estimated costs of completion and the estimated costs necessary to make the sale.

write-off

of inventories is estimated based on an ageing or rotation analysis.

Work in progress relates to production of inventory for which a customer has not yet been secured, while contracts in progress are contract assets that relate to production for specific customers in performance of a signed contract. We refer also to the accounting policy on revenue recognition.

Financial assets

Trade receivables and debt instruments issued are initially recognized when they are originated. All other financial assets are initially recognized when the Group become a party to the contractual provisions of the instrument.

Financial assets are classified at initial recognition, and subsequently measured either at amortized cost, either fair value through other comprehensive income (OCI), and fair value through profit or loss. The classification of financial assets at initial recognition depends on the financial asset’s contractual cash flow characteristics and the Group’s business model for managing them.

With the exception of trade receivables that do not contain a significant financing component or for which the Group has applied the practical expedient, the Group initially measures a financial asset at its fair value plus transaction costs, in the case of a financial asset not at fair value through profit or loss. Trade receivables that do not contain a significant financing component or for which the Group has applied the practical expedient are measured at the transaction price.

For purposes of subsequent measurement, financial assets are classified in four categories:

•

Financial assets at amortized cost;

•

Financial assets at fair value through OCI with recycling of cumulative gains and losses (debt instruments);

•

Financial assets designated at fair value through OCI with no recycling of cumulative gains and losses upon derecognition (equity instruments); and

F-20

Table of Contents

•

Financial assets at fair value through profit or loss.

Financial assets measured at amortized cost

This category is the most relevant to the Group. The Group measures financial assets at amortized cost if both of the following conditions are met:

•

The financial asset is held within a business model with the objective to hold financial assets in order to collect contractual cash flows; and

•

The contractual terms of the financial asset give rise on specified dates to cash flows that are solely payments of principal and interest on the principal amount outstanding.

Financial assets, trade and other receivables, cash and cash equivalents at amortized cost are subsequently measured using the effective interest rate (EIR) method and are subject to impairment. Gains and losses are recognized in profit or loss when the asset is derecognized, modified or impaired.

Financial assets at fair value through OCI with recycling of cumulative gains and losses (debt instruments)

The Group currently does not have financial assets at fair value through OCI with recycling of cumulative gains and losses.

Financial assets designated at fair value through OCI with no recycling of cumulative gains and losses upon derecognition (equity instruments)

The Group has irrevocably elected at initial recognition to classify the minority equity investments in the

non-listed

companies Essentium Inc. and

AM-Flow

BV, as disclosed in Note 10 and Note 20, as financial assets designated at fair value through OCI as this measurement is most representative of the business model for these assets. Gain and losses on these financial assets are never recycled to profit and loss. Equity instruments designated at fair value through OCI are not subject to impairment assessment.

Financial assets measured at fair value through profit or loss

The Group has the following financial assets classified as financial assets at fair value through profit or loss:

•

derivatives, also including the option acquired by the Group to purchase all shares of Link3D as disclosed in Note 4 and Note 10;

•

convertible loan granted to the company Fluidda as disclosed in Note 10.

Those financial assets are carried in the statement of financial position at fair value with changes recognized in the income statement in the lines financial income/expense.

Derecognition

A financial asset is derecognized when:

•

The rights to receive cash flows from the asset have expired, or

•

The Group has transferred its rights to receive cash flows from the assets.

The Group has a factoring agreement in place with one subsidiary whereby its rights to receive the cash flows from the trade receivables are transferred to the factor on a

non-recourse

basis. The related trade receivables are derecognized at the moment that the cash is received from the factor.

Impairment of financial assets

Further disclosures relating to impairment of financial assets are also provided in Note 3 Significant accounting judgments, estimates and assumptions.

The Group recognizes an allowance for expected credit losses (ECLs) for all debt instruments not held at fair value through profit or loss.

For trade receivables and contract assets, the Group applies a simplified approach in calculating ECLs. A loss allowance is recognized at each reporting date based on lifetime ECLs. The Group established a provision matrix that is based on its historical loss experience, adjusted for forward-looking factors specific to the debtors and the economic environment.

For all other receivables, ECLs are based on the difference between the contractual cash flows due in accordance with the contract and all the cash flows that the Group expects to receive, discounted at an approximation of the original effective interest rate. The expected cash flows will include cash flows from the sale of collateral held or other credit enhancements that are integral to the contractual terms. ECLs are recognized in two stages. For credit exposures for which there has not been a significant increase in credit risk since initial recognition, ECLs are provided for credit losses that result from default events that are possible within the next

12-months

12-month

ECL). For those credit exposures for which there has been a significant increase in credit risk since initial recognition, a loss allowance is required for credit losses expected over the remaining life of the exposure, irrespective of the timing of the default (a lifetime ECL). When determining whether the credit risk has increased significantly since initial recognition, the group considers reasonable and supportable information that is relevant and available with undue cost or effort, including both quantitative and qualitative information and analysis, based on the Group’s historical experience and informed credit assessments, that includes forward-looking information. The Group assumes that the credit risk on a financial asset has increased significantly if it is more than 30 days past due. An event of default takes place when the debtor is unlikely to pay its credit obligations to the Group in full or when the financial asset is more than one year past due.

F-21

Table of Contents

Financial liabilities

All financial liabilities are recognized initially at fair value and, in the case of loans and borrowings and payables, net of directly attributable transaction costs.

The Group’s financial liabilities include trade and other payables, loans and borrowings including bank overdrafts and derivative financial instruments including written put options over

non-controlling

interests.

Financial liabilities at amortized cost

The trade and other payables, and loans and borrowings are classified as financial liabilities at amortized cost.

Those financial liabilities are measured at amortized cost using the effective interest rate method. Gains and losses are recognized in the income statement when the liabilities are derecognized as well as through the effective interest rate method amortization process.

Financial liabilities at fair value through profit and loss

The derivative financial instruments are classified as financial liabilities at fair value through profit and loss except for the written put options on

non-controlling

interests which is disclosed below.

Written put options on

non-controlling

interest

The Group recognizes a financial liability for the written put options on

non-controlling

interest. The written put options have a variable redemption price based on a formula as specified in the contract (see Note 13).

•

The financial liability is initially recognized at fair value and the fair value is reclassified from

non-controlling

interest and, for any amount higher than the

non-controlling

interest, from consolidated reserves.

•

The fair value is determined as the present value of the redemption amount.

•

Any change in the fair value as a result of a change in the estimated redemption price is recognized directly in consolidated reserves. Any unwinding effect of the present value of the redemption price is recognized directly in profit and loss (financial cost).

•

No share of profit is allocated to the

non-controlling

interest.

•

Upon exercise of the written put option, the carrying value will be offset with the cash payment received. When the written put option is not exercised, the carrying value of the financial liability is derecognized against

non-controlling

interest with the difference going to consolidated reserves.

Compound financial instruments

The Group has issued convertible debt which is accounted for as a compound financial instrument. For those instruments, the Group determines the carrying amount of the liability component by measuring the fair value of a similar liability (including any embedded

non-equity

derivative features) that does not have an associated equity component. The carrying amount of the equity instrument is then determined by deducting the fair value of the financial liability from the fair value of the compound financial instrument as a whole. Directly attributable transaction costs are apportioned between the liability and equity components of the convertible debt instrument, based on the allocation of proceeds to the liability and equity components when the instruments are initially recognized. Subsequent to initial recognition, the liability component of a compound financial instrument, is measured at amortized cost using the effective interest method. The equity component of a compound financial instrument is not remeasured.

Derecognition

A financial liability is derecognized when the obligation under the liability is discharged or cancelled or expires.

Offsetting

Financial assets and financial liabilities are offset and the net amount is reported in the consolidated statement of financial position if there is a currently enforceable legal right to offset the recognized amounts and there is an intention to settle on a net basis, or to realize the assets and settle the liabilities simultaneously.

Share capital

Financial instruments issued by the Group are classified as equity only to the extent that they do not meet the definition of a financial liability or financial asset. The Group’s ordinary shares are classified as equity instruments.

Provisions

Provisions are recognized when the Group has a present obligation (legal or constructive) as a result of a past event, it is probable that an outflow of resources embodying economic benefits will be required to settle the obligation and a reliable estimate can be made of the amount of the obligation.

F-22

Table of Contents

Pensions benefits

The Group has a defined contribution obligation where the Group pays contributions based on salaries to an insurance company, in accordance with the laws and agreements in each country.

The Belgian defined contribution pension plans are by law with variable minimum returns based on the Belgian government bonds, with a minimum of 1.75% and a maximum of 3.75%, effective for contributions paid as from 2016. For contribution paid until 2015, the minimum guaranteed return is 3.25% on employer contributions and 3.75% on employee contributions.

These plans qualify as defined benefit plans. Contributions are recognized as expenses for the period in which employees perform the corresponding services. Outstanding payments at the end of the period are shown as other current liabilities.

Those plans are not accounted for as a defined benefit plan as they are considered to be not material.

Share based payments

Directors and employees (including senior executives) of the Group receive remuneration in the form of share-based payments, whereby employees render services as consideration for equity instruments (equity-settled transactions). The Group currently has only warrants and share-appreciation rights as share-based payments.

Equity-settled transactions

Equity-settled share-based payments to employees and others providing similar services are measured, indirectly, at the fair value of the equity instruments granted. The cost of equity-settled transactions is recognized, together with a corresponding increase in other capital reserves in equity, over the period in which the performance and/or service conditions are fulfilled. The cumulative expense recognized for equity-settled transactions at each reporting date until the vesting date reflects the extent to which the vesting period has expired and the Group’s best estimate of the number of equity instruments that will ultimately vest. The income statement expense or credit for a period represents the movement in cumulative expense recognized at the beginning and end of that period and is recognized as employee benefits expense.

The Group does currently only have equity-settled share-based payments that have service-based vesting conditions and no instruments with market vesting conditions.

No expense is recognized for awards that do not ultimately vest.

When the terms of an equity-settled award are modified, the minimum expense recognized is the expense as if the terms had not been modified, if the original terms of the award are met. An additional expense is recognized for any modification that increases the total fair value of the share-based payment transaction, or is otherwise beneficial to the employee as measured at the date of modification.

When an equity-settled award is cancelled, it is treated as if it vested on the date of cancellation, and any expense not yet recognized for the award is recognized immediately. This includes any award where

non-vesting

conditions within the control of either the entity or the employee are not met. However, if a new award is substituted for the cancelled award, and designated as a replacement award on the date that it is granted, the cancelled and new awards are treated as if they were a modification of the original award, as described in the previous paragraph.

Cash-settled transactions

The Group has cash-settled share-based payment transactions for certain employees in certain countries due to legal requirements (in the form of share-appreciation rights). The cost of cash-settled transactions is measured initially at fair value at the grant date. This fair value is expensed over the period until the vesting date with recognition of a corresponding liability. The liability is remeasured to fair value at each reporting date up to, and including the settlement date, with changes in fair value recognized in employee benefits expense.

Revenue from contracts with customers

The Group’s revenue, which is presented net of sales taxes, is primarily generated by the sale of our software and 3D printed products and services. Software revenue is comprised of perpetual and periodic licenses, maintenance revenue and software development service fees. Perpetual license holders may opt to take an annual maintenance contract, which leads to annual fees. Periodic licenses entitle the customer to maintenance, support and product updates without additional charge. Revenue from prototypes and end products involving 3D printing technology is derived from our network of production centers and may include support and services such as

pre-production

collaboration prior to the actual production.

The Group sells its products and software through its direct sales force and through authorized distributors.

Software license revenue, maintenance and/or software development service fees may be bundled in one arrangement, or may be sold separately.

The Group recognizes revenue for goods including software based on the five-step model per the requirements of IFRS 15.

F-23

Table of Contents

•

Identify the contract(s) with a customer;

•

Identify the performance obligations in the contract;

•

Determine the transaction price;

•

Allocate the transaction price to the performance obligations in the contract; and

•

Recognize revenue when (or as) the entity satisfies a performance obligation.

Revenue from contracts with customers is recognized when control of the goods or services are transferred to the customer at an amount that reflects the consideration to which the Group is expected to be entitled in exchange from those goods and services.

If the consideration in a contract includes a variable amount, the Group estimates the amount of consideration to which it will be entitled in exchange for transferring the goods to the customer. The variable consideration is estimated at contract inception and constrained until it is highly probable that a significant revenue reversal in the amount of cumulative revenue recognized will not occur when the associated uncertainty with the variable consideration is subsequently resolved. Variable consideration is mainly related to quantities sold, volume (step-based) rebates and development time spent.

Prototypes and end products involving 3D printing technology

The Group recognizes revenue on the sale of goods to the customer or distributor at a point in time when control of the asset is transferred, generally upon shipment or delivery taking into account the shipment terms (usually

Ex-works

or FOB Time of Shipment Incoterms (International Commercial Terms)).

Perpetual licensed software

The sale and/or license of software products is deemed to have occurred at a point in time, i.e. when a customer either has taken possession of or has the ability to take immediate possession of the software and the software key.

Most of the perpetual software licenses include one year maintenance and support services as a separate performance obligation. The Company sells these maintenance services also on a stand-alone basis and is therefore capable of determining their stand-alone selling price. On this basis, the amount of the embedded maintenance is separated from the fee for the perpetual license and is recognized ratably over the period to which they relate.

Time-based licensed software

The time-based license agreements include the use of a software license for a fixed term and maintenance and support services during the same period. The Company does not sell time-based licenses without maintenance and support services and therefore revenues are satisfied over time for the entire arrangements and are recognized ratably over the term.

Maintenance and support services

Maintenance and support services are satisfied over time and as such, the Group recognizes this revenue ratably on a straight-line basis over the term that the maintenance service is provided. In general, maintenance services are not automatically renewed.

A maintenance and support contract may include a reinstatement for previous years when the customer did not have a maintenance and support contract previously. Revenue from reinstatements are recognized immediately when the maintenance and support services commence.

Software development services (SDS)

SDS include customized development of software components for customers. Revenue from SDS agreements when distinct from other performance obligations is satisfied over time or at a point in time, depending whether one of the IFRS 15.35 criteria for performance obligations to be satisfied over time is met or not. In case of recognition over time, revenue is recognized either on time and material basis or on the stage of completion of each service when the percentage of completion can be measured reliably.

The Company determines the

percentage-of-completion

by comparing labor hours incurred

to-date

to the estimated total labor hours required to complete the project. The Company considers labor hours to be the most reliable available measure of progress on these projects. Adjustments to the Company’s estimates of the time to completion are made when facts resulting in a change become known. When the estimate indicates that a loss will be incurred, such loss is recognized immediately.

In case of recognition at a point in time revenue is recognized when control over the product is transferred to the customer.

Contracts with multiple performance obligations

The Group has entered into a number of contracts with multiple performance obligations, such as when selling perpetual licenses that may include maintenance and support (included in the price of perpetual licenses) and time-based licenses (that include embedded maintenance and support, both of which may be sold with software development services, training, and other product sales). In some cases, the Group delivers software development services bundled with the sale of the software.

F-24

Table of Contents

The Group evaluates whether each performance obligation is distinct from each other, i.e. the customer can benefit from the good or service on its own, or with readily available resources. Certain development services significantly modify and/or enhance the software license and as such are not considered distinct and combined with the software license.

In those contracts, whether sold to

end-customers

or to collaboration partners, the Group uses either price list, historical pricing information or management’s best estimate of selling prices (e.g. also using a cost-plus method) to determine the stand-alone selling price for each distinct performance obligation, including software and software-related services such as maintenance and support. In general, elements in such arrangements are also sold on a stand-alone basis and stand-alone selling prices are readily available. If the stand-alone selling price of one or more goods or services in such arrangements is highly variable or uncertain, the Group estimates the stand-alone selling price with reference to the total transaction price less the sum of the observable stand-alone selling prices of other goods or services promised in the contract.

Revenue is allocated to each distinct performance obligation (“PO”) based on the relative percentage of the stand-alone selling price for each PO compared to the total of stand-alone selling prices for all PO over the total transaction price and is recognized when the revenue recognition criteria described above are met.

Contracts with collaboration partners in the medical segment also include multiple elements such as software, maintenance and support services, training, software development services, 3D printed products and royalties. Revenue from those contracts is determined and recognized consistent with other multiple element arrangements.

For certain contracts with collaboration partners, the Company receives

up-front

fees, paid by customers for certain exclusivity rights, which may be bundled with transfer of title, rights and ownership of certain software products and maintenance and support services. In case the

up-front

fees do not relate to already delivered good or services, the Group includes the

up-front

fees in the total transaction price which is then allocated to all the distinct performance obligations. Other contracts with collaboration partners include prepaid fees to purchase a maximum number of “Plan Only” cases or case ‘bundles’ during a

12-month

period. In this case, the prepaid fees are recognized over the period of 12 months based on the expected number of cases that will be purchased.

Contract assets

A contract asset is the right to consideration in exchange for goods or services transferred to the customer. If the Group performs by transferring goods or services to a customer before the customer pays consideration or before payment is due, a contract asset is recognized for the earned consideration that is conditional. Contract assets are only contracts in progress that are disclosed with the line inventory and contracts in progress in the statement of financial position. We refer to our accounting policies regarding Inventories and Contracts in Progress.

Contract liabilities

A contract liability is the obligation to transfer goods or services to a customer for which the Group has received consideration (or an amount of consideration is due) from the customer. If a customer pays consideration before the Group transfers goods or services to the customer, a contract liability is recognized when the payment is made or the payment is due (whichever is earlier). Contract liabilities are recognized as revenue when the Group performs under the contract. Contract liabilities are presented as deferred income in the statement of financial position.

Contract costs

The Group does not have significant costs to obtain contracts and those costs are expensed as incurred.

The Group may have costs incurred in fulfilling contracts that are accounted for as intangible assets. When those costs are not in scope of another standards, these costs are accounted for under contracts in progress (see contract assets). For certain contracts, the Group may have significant software development expenses that are not considered a “distinct performance obligation” which are accounted for as an intangible assets. The Group evaluates whether those costs meet the recognition criteria for an intangible assets and when criteria are not met, expenses those costs as incurred.

Government grants

Where retention of a government grant related to assets or to income, is dependent on the Company satisfying certain criteria, it is initially recognized as deferred income. When the criteria for retention have been satisfied, the deferred income balance is released to other operating income in the consolidated income statement on a systematic basis over the periods in which the entity recognizes as expenses the related costs for which the grants are intended to compensate.

F-25

Table of Contents

Other financial income and expenses

Other financial income and expenses include mainly foreign currency gains or losses on financial transactions and bank related expenses.

Taxes

Current income tax

Income tax assets and liabilities for the current period are measured at the amount expected to be recovered from or paid to the taxation authorities. The tax rates and tax laws used to compute the amount are those that are enacted or substantively enacted, at the reporting date.

Current income tax relating to items that are recognized directly in equity is recognized in equity and not in the income statement. Management periodically evaluates positions taken in the tax returns with respect to situations in which applicable tax regulations are subject to interpretation and establishes provisions where appropriate.

Deferred tax

Deferred tax is calculated using the liability method on temporary differences at the reporting date between the tax bases of assets and liabilities and their carrying amounts for financial reporting purposes.

Deferred tax liabilities are recognized for all taxable temporary differences. Deferred tax assets are recognized for all deductible temporary differences, carry forward of unused tax credits and unused tax losses, to the extent that it is probable that taxable profit will be available against which the deductible temporary differences or the carry forward of unused tax credits and unused tax losses can be utilized. In order for any deferred tax assets to be recognized, and at a minimum, the respective Materialise entity should have recorded a taxable profit in the current year and it should be probable that a taxable profit will be achieved in the subsequent year.

The carrying amount of deferred tax assets is reviewed at each reporting date and reduced to the extent that it is no longer probable that sufficient taxable profit will be available to allow all or part of the deferred tax asset to be utilized. Unrecognized deferred tax assets are reassessed at each reporting date and are recognized to the extent that it has become probable that future taxable profits will allow the deferred tax asset to be recovered.

Deferred tax assets and liabilities are measured at the tax rates that are expected to apply in the year when the asset is realized or the liability is settled, based on tax rates (and tax laws) that have been enacted or substantively enacted at the reporting date.

Deferred tax assets and deferred tax liabilities are offset, if a legally enforceable right exists to set off current tax assets against current income tax liabilities and the deferred taxes relate to the same taxable entity and the same taxation authority.

Sales tax

Revenue, expenses and assets are recognized net of the amount of VAT, except:

•

Where the sales tax incurred on a purchase of assets or services is not recoverable from the taxation authority, in which case the sales tax is recognized as part of the cost of acquisition of the asset or as part of the expense item as applicable; and

•

Receivables and payables that are stated with the amount of sales tax included.

The net amount of sales tax recoverable from, or payable to, the taxation authority is included as part of receivables or payables in the statement of financial position.

F-26

Table of Contents

Significant accounting judgments, estimates and assumptions

The preparation of the Group’s consolidated financial statements requires management to make judgments, estimates and assumptions that affect the reported amounts of revenue, expenses, assets and liabilities, and related disclosures. Uncertainty about these assumptions and estimates could lead to outcomes that require a material adjustment to the carrying amount of assets or liabilities for future periods.

The Group reviews its estimates, assumptions and judgments on an ongoing basis, including those related to revenue recognition, development expenses, share-based payment transactions, income taxes, impairment of goodwill, intangible assets and property, plant & equipment and business combinations, provisions for expected credit losses, convertible loans, equity instruments, useful lives of certain assets and leases.

The Group has based its assumptions and estimates on the parameters that were available when the consolidated financial statements were prepared. However, existing conditions and assumptions about future developments, may change due to market changes or circumstances beyond the Group’s control. Such changes are incorporated into the assumptions as they occur.

Revenue recognition

Our revenue recognition policy requires management to make significant estimates. Management analyzes various factors, including an evaluation of specific transactions, historical experience, creditworthiness of customers and current market and economic conditions. Changes in judgments based upon these factors may affect the timing and amount of revenues and expenses recognized and, consequently, the results of operations and financial condition. Significant estimates and judgments relate to:

•

Assessing whether a performance obligation is distinct in a bundled sales transactions;

•

Estimation of the variable considerations and the revenue constraint;

•

Estimation of stand-alone selling prices for each distinct performance obligation; and

•

The stage of completion of our custom development of software components for customers when revenues are satisfied over time.

The Group makes significant judgments when performing the assessment of whether a performance obligation is distinct from the other performance obligations in a contract, i.e. whether the good or service has a benefit to the customer in its own or together with readily available resources and/or whether the good or service is highly interrelated or constitutes a significant input with another good or service provided, or whether it significantly modifies or tailors another good or service. The relevant assessments include but are not limited to the following:

•

Whether the software license is distinct from the 3D printed guides — in most cases with contracts with collaborative partners in the Materialise Medical segment, the software licenses are combined with the manufacturing of the 3D printed guides, as the software license has no benefit to the customer without the manufacturing services.

•

Whether the development services are distinct from other performance obligations — in most cases these performance obligations are distinct but for certain contracts, the software license may be combined with the license and the 3D printed guides as one distinct performance obligation.

For stand-alone selling prices, the Group uses prices from price lists or historical prices for similar transactions. However, in certain cases such information is not readily available and in those cases the Group estimates the stand-alone selling price based on a cost plus

mark-up

or other estimate. In addition, for certain performance obligations such as development services, the stand-alone selling prices also require an estimate of the time required to complete the development. If the Group determines that the stand-alone selling price of one or more goods or services in a multiple element arrangement is highly variable or uncertain, the Group estimates the stand-alone selling price with reference to the total transaction price less the sum of the observable stand-alone selling prices of other goods or services promised in the contract.

Certain contracts include estimates of variable considerations within the transaction price and assessing the revenue constraint, such as:

•

Quantities/volume sold at fixed prices related to, but not limited to, the manufacturing of 3D printed products, software licenses sold, maintenance renewals;

•

Contractual prices may vary based on volume purchased during a given period;

•

FTE expenses for development or other services billed on a time and material basis; and

•

Volume rebates.

The method used to estimate the variable consideration depends on the number of possible scenarios and the probability of each scenario. If there are many possible scenarios with a high probability (each less than 50%), the Group will use the expected value method, while the most likely method is used when there is a scenario with a higher probability (more than 50%).

Variable consideration is not constrained when the Group determines, based on historical experience, a high reliable business forecast and/or the time frame of the estimates, that there is a high probability that it will not result in a future reversal of revenue.

We determine the stage of completion for development contracts satisfied over time by comparing the labor hours incurred to date with the estimated total labor hours required to complete the project. We consider labor hours to be the most reliable, available measure of progress on these projects. Adjustments to estimates are made in the period when facts that give rise to a change become known. When the estimate indicates that a loss will be incurred, the loss is recorded in the relevant period. Significant judgments and estimates are involved in determining the percentage of completion for each contract. Different assumptions can produce materially different results.

F-2

Table of Contents

Development expenses

Under IAS 38, internally generated intangible assets from the development phase are recognized if certain conditions are met. These conditions include technical feasibility, the intention to complete, the ability to use or sell the asset under development, the availability of adequate technical, financial and other resources to complete the development, the ability to reliabily measure the expenditure attributable to the intangible asset during development and evidence of how the asset will generate probable future economic benefits. The cost of a recognized internally generated intangible asset includes all directly attributable costs necessary to make the asset suitable for use as intended by management. In contrast, all expenditures arising from the research phase are expensed as incurred.

Determining whether internally generated intangible assets from development should be recognized as intangible assets requires significant judgment, particularly in determining whether the activities are considered research activities or development activities, whether the product enhancement is substantial, whether completion of the asset is technically feasible considering a company-specific approach, the likelihood of future economic benefits from sale or use, including an assessment of whether FDA approval will be obtained.

The Group has determined that the conditions for recognizing internally generated intangible assets from its own software, guides and other product development activities are not met until shortly before the products are available for sale, unless either (i) the Group has strong evidence that the above criteria are met and a detailed business plan is available showing that the asset will generate future economic benefits on a reasonable basis or (ii) the development is done at the specific request of the customer, the Group intends to market the product to other parties than the customer, the development is subject to an agreement and the substance of the agreement is that the customer will reimburse the Group for a significant portion of the development costs incurred. As such, development expenditures that do not meet the above criteria and expenditures for the research phase of internal projects are recognized in the consolidated income statement as incurred. This assessment is monitored by the Group on a regular basis.

The Group capitalized a total of K€2,659 of development expenses during 2021 of which:

•

K€1,684 related to capitalized internal development expenses of our digital transformation program; and

•

K€975 related to the transformation of the platform architecture to enable our software products to make the transition from desktop to (hybrid) cloud.

Share-based payment transactions

The Group measures the cost of equity-settled transactions with employees based on the fair value of the equity instruments at the date at which they are granted, and measures the cost of cash-settled transactions based on the fair value of the equity instrument at the date of reporting. The Group has applied the Black-Scholes valuation model to estimate fair value. The use of this model requires management to make assumptions regarding the volatility and expected life of the equity instruments. The assumptions used to determine fair value for share-based payment transactions are disclosed in Note 14 and are as follows:

•

Volatility is determined based on the Group’s average annualized volatility;

•

The estimated life of the warrant is determined up to the first exercise period, which is typically the month after the vesting;

•

The fair value of the shares is determined based on the Group’s share price on Nasdaq on the date of issuance. For the grants prior to the initial public offering, the fair value of the shares was estimated based on a discounted cash flow model with

3-year

cash flow projections and a multiple of EBITDA determined based on a number of listed industry peers in the 3D printing industry; and

•

The dividend yield is estimated based on the Group’s historical dividend payout. It is currently estimated at zero as no dividends have been paid since inception.

Income taxes

In order for any deferred tax assets to be recognized, and at a minimum, the respective Materialise entity should have recorded a taxable profit in the current year and it should be probable that a taxable profit will be achieved in the subsequent year.

As at December 31, 2021, the Group had current and

non-current

receivables related to tax credits for an amount of K€4,717 (2020: K€4,647; 2019: K€3,723)

As at December 31, 2021, the Group had K€58,161 (2020: K€50,538; 2019: K€37,440) of tax losses carried forward and

unused

Innovation Income Deductions, of which K€35,578 related to Materialise NV (2020: K€27,878; 2019: K€25,172). These losses relate to the parent and subsidiaries that have a history of losses, in countries where these losses do not expire and may not be used to offset taxable income elsewhere in the Group.

F-2

Table of Contents

With respect to the unused tax losses

and Innovative Income Deduction

of Materialise NV, 0 deferred tax assets have been recognized in 2021, 2020 and 2019, given that in view of the Belgian Patent Income Deduction and Innovation Income Deduction there is an uncertainty to which extent these tax losses will be used in future years. As from July 1, 2016, the Innovation Income Deduction replaced the former Patent Income Deduction. Under the grandfathering rule the Patent Income Deduction system could still be applied until June 30, 2021. The Belgian Patent Income Deduction allows companies to deduct 80% of the qualifying gross patent income from the taxable basis. Under the Innovation Income Deduction system, companies can deduct up to 85% of their net innovation income from the taxable basis. According to the Group’s policy the Company has assessed that no deferred tax asset should be accounted for with respect to its unused tax losses and unused Innovation Income Deductions carried forward in Belgium.

and Innovation Income Deduction totaling

K€12,033 in 2021 (2020: K€22,661; 2019: K€10,737) given that it is not probable that sufficient positive taxable base will be available in the foreseeable future against which these tax losses

and Innovation Income Deduction

can be utilized.

If all deferred tax assets

related to tax losses carried forward and unused Innovation Income Deduction

would meet the criteria for recognition, the net result would have improved by

K€12,033

in 2021 through a deferred tax benefit. This would represent the planned recovery of

K€48,648

carried

forward tax losses

and Innovation Income Deduction

in future periods. Further details on taxes are disclosed in Note 22.10.

Impairment of goodwill, intangible assets and property, plant & equipment and determination of the cash-generating-unit.

The Group has goodwill for a total amount of K€18,726 as at December 31, 2021 (2020: K€18,599; 2019: K€19,607) which has been subject to an impairment test. The goodwill is tested for impairment based on a discounted cash flow model with cash flows for the next five years derived from the budget and a residual value considering a perpetual growth rate. The value in use is sensitive to the discount rate used for the DCF model as well as the expected future cash-inflows and the growth rate used for extrapolation purposes.

Also, as part of the impairment analysis, the Group needs to determine the different CGUs at the lowest

non-aggregated

level which requires the Group to make judgments about application of the criteria to determine the CGUs based on the facts and circumstances how the entities and business units within the CGU and within the Group operate and are monitored. The level of CGU may also have an impact on certain assumptions to make with regard to transfer pricing.

The key assumptions used to determine the value in use for the different CGUs are disclosed and further explained in Note 5.

The Group capitalized development expenses in 2021 for a total amount K€2,659 (2020: K€4,541; 2019: K€1,328), including external acquired licences, which as of December 31, 2021 were not yet in the condition as intended by management and as such not amortized. Those development expenses have been subject to an impairment test based on a discounted cash flow model with cash flows derived from the latest business plan. The value in use is sensitive to the discount rate used for the DCF model as well as the expected commercialization date for the products and the expected future cash inflows after commercialization. We refer to the section on development expenses above for further explanations.

When events or changes in circumstances indicate that the carrying amount of the intangible assets and property, plant and equipment may not be recoverable, we estimate the value in use for the individual assets, or when not possible, at the level of CGUs to which the individual assets belong.

During 2021 impairment charges have been recorded for K€177 (2020: K€4,606; 2019: K€0) related to the goodwill of Aldema (Metal Belgium).

Business combinations

We determine and allocate the purchase price of an acquired business to the assets acquired and liabilities assumed as of the business combination date. Business combinations are discussed further in Note 4. The purchase price allocation process requires us to make significant estimates and assumptions, including

•

estimated fair value of the acquired intangible assets;

•

estimated fair value of property, plant and equipment; and

•

estimated fair value of the contingent consideration.

The contingent consideration as included in the financial statements is recorded at fair value at the date of acquisition and is reviewed on a regular basis. The fair value of the contingent consideration is based on risk-adjusted future cash flows of different scenarios discounted using appropriate interest rates. The structure of the possible scenarios and the probability assigned to each one of them is reassessed by management at every reporting period and requires judgement from management about the outcome and probability of the different scenarios as well as the evolution of the variables.

•

future expected cash flows from customer contracts and relationships, software license sales and maintenance agreements;

•

the fair value of the plant and equipment

•

the fair value of the deferred revenue; and

•

discount rates.

F-

Table of Contents

Provision for expected credit losses of trade receivables and contract assets

The Group uses a provision matrix to calculate ECLs for trade receivables and contract assets. The provision rates are based on days past due for groupings of various customer segments that have similar loss patterns (i.e., by legal entity).

The provision matrix is initially based on the Group’s historical observed default rates. The Group will calibrate the matrix to adjust the historical credit loss experience with forward-looking information. For instance, if forecast economic conditions (i.e., gross domestic product) are expected to deteriorate over the next year which can lead to an increased number of defaults, the historical default rates are adjusted. At every reporting date, the historical observed default rates are updated and changes in the forward-looking estimates are analyzed.

The assessment of the correlation between historical observed default rates, forecast economic conditions and ECLs is a significant estimate. The amount of ECLs is sensitive to changes in circumstances and of forecast economic conditions. The Group’s historical credit loss experience and forecast of economic conditions may also not be representative of customer’s actual default in the future.

Convertible debt instruments

At December 31, 2021 the Group holds convertible debt instrument issued by Fluidda which is measured at fair value through profit & loss. In determining the fair value of those convertible debt instruments, the Group considers different contractual parameters such as the repayment and conversion scenarios and dates. In addition, the Group needs to make significant estimates such as (i) the discount rate, (ii) the probabilities for each repayment and conversion scenario, (iii) the amount of a qualified capital increase that will determine the conversion factor and (iv) the timing for each repayment and conversion scenario.

The convertible loan granted to Fluidda in January 2019 has a notional amount of K€2,500. The carrying value of the convertible loan as at December 31, 2021 amounted to K€3,554 which includes a fair value adjustment of K€316 recorded in financial income during 2020. Fluidda is a private

start-up

company which offers turnkey contract research services for drug development and medical device development. Fluidda is currently loss-making. The convertible loan has a duration of 7 years with a 10% annual interest rate which are capitalized. The Group has applied a discount factor of 12.87% that is based on the estimated WACC of Fluidda reflecting the uncertainty in relation to the success of the company and the applied estimates by the Group.

The Group previously granted a convertible loan to AM Flow in January 2020 with a notional amount of K€300. The loan was converted into shares of AM Flow in September 2020 at a fair value of K€306.

Equity investment held in Essentium

The Group acquired an equity investment of K$3,300 in Essentium, a

non-listed

US company during 2018 and 2019. The Group has elected to measure the equity investment at fair value with changes in fair value recognized in OCI. The fair value adjustment was estimated based on available information related to the liquidity and the fund raising process of Essentium. Based on the valuation of a recent Series B capital round, the Group estimated the fair value of its investment at December 31, 2020 at K€3,535 and recognized a fair value adjustment in OCI of K€489 for the year ended December 31, 2020. At the end of 2021 Essentium was facing significant liquidity issues and significant uncertainty related to the fund raising process, and started a process of restructuring its organization. As a result of these elements, and considering the Group’s subordinate position as shareholder, the Group remeasured the fair value of its investment to zero at December 31, 2021 and recognized a K€3,443 downward fair value adjustment in OCI for the year ended December 31, 2021.

Changes in useful life for certain assets

We review the useful life of our definite lived intangible assets and property, plant and equipment on an annual basis considering the current facts and circumstances available. This review resulted in 2019 in a

re-assessment

of the useful life for certain specific assets in the categories buildings, fixtures, vehicles and machinery. We refer to Note 7 for the impact of the change in useful lives during the year 2019.

F-3

Table of Contents

The intangibles with indefinite useful lives are reviewed each annual reporting to determine whether events and circumstances continue to support an indefinite useful life.

Leases IFRS 16 – estimating the discount rate and probability of exercising extension options/termination options and purchase options

The Group cannot always determine the interest rate implicit in the lease contract and therefore, the Group has to estimate the incremental borrowing rate to measure certain lease liabilities such as buildings. The Group uses for buildings the property yield as reference to determine the incremental borrowing rate. For other assets, the Group generally uses the interest rate implicit in the lease contract or applies the incremental borrowing rate for a portfolio of similar assets. The incremental borrowing rate reflects what the Group “would have to pay”, which requires estimation when no observable rates are available or when they need to be adjusted to reflect the terms and conditions of the lease.

In addition, certain lease contracts may have extension options, termination options in case of property leases and/or purchase options in case of leases. The Group estimates whether it is reasonable certain or not, whether those options will be exercised or not, which impact the lease term in case of extension options and termination options and the period over which the lease assets are depreciated in case of purchase options.

F-3

Table of Contents

4 Business Combinations

Business combination after the end of the reporting period

On April 9, 2021, the Group acquired an option to buy Link3D Inc.. On November 15, 2021, Materialise provided notice to Link3D of its intention to exercise the option. The acquisition was completed on January 4, 2022. This acquisition was effectuated through the Group’s U.S. subsidiary, Materialise USA, LLC. As a result of this transaction, Materialise USA has become the sole shareholder of Link3D. On January 4, 2022, the Group completed the acquisition and obtained control of Link3D Inc.. Link3D is a an additive workflow and digital manufacturing software company. The Group acquired 100% of voting equity interests in Link3D Inc. for a total consideration of K$ 30,200.

The acquisition of Link3D

is expected to

strengthen and accelerate the creation of the Materialise software platform, particularly for companies that are scaling up their additive manufacturing operations to volume production. By integrating Link3D’s additive MES (Manufacturing Execution System) solution with the Materialise Magics software suite into a unified, cloud-based software platform, manufacturers will be able to run and continuously improve the most efficient, repeatable, automated and controlled processes to mass-produce identical or customized products. This process extends beyond the actual 3D printing operations and creates a closer alignment between 3D printing and conventional manufacturing, signaling the removal of the wall between both production environments.

At the time of approval for issue of these consolidated financial statements, the initial accounting for the business combination, including the purchase price allocation, had not yet been completed. Furthermore, the fair values of assets acquired and liabilities assumed, and the amount of goodwill to be recognized, had not yet been determined. Therefore, the related disclosures could not yet be made

Acquisitions in 2021

The Group did not effect any business combinations in the course of 2021.

Acquisitions in 2020

Materialise Motion

The Group executed a share purchase agreement dated November 9, 2020 and acquired the remaining 50% of the shares of Materialise Motion NV (“Materialise Motion”, formerly RS Print) for a total purchase consideration in cash of K€5,220. The debt of previous owner of K€655 related to the called unpaid capital was transferred to the Group. Before this transaction, the Group already had a 50% interest in Materialise Motion. The fair value of the previously held equity method investment was valued at K€770. The corresponding gain was presented within net other operating income for the year ended December 31, 2020 (Note 22.6).

In determining the fair value of the previously held equity method investment, a strategic discount, a minority discount and a discount for lack of marketability were considered in relation to the consideration paid for this transaction.

Simultaneously with the share purchase agreement, Materialise Motion and RS Scan International NV (“RS Scan”), the former

co-shareholder

of Materialise Motion, entered into an asset purchase agreement regarding the acquisition by Materialise Motion of certain assets of RS Scan with closing date on 9 November 2020 for a total purchase consideration in cash of K€3,000.

Materialise Motion is a Belgian-based company that specializes in manufacturing of orthopaedic and medical insoles and the development and commercialization of hardware and software for foot pressure measurement.

The fair value of the identifiable assets and liabilities at the date of acquisition was assessed at:


in 000€	Carrying value at acquisition date			Fair value adjustments			Fair value at acquisition date
Assets
Developed technology		0			4,820			4,820
Customer relations		0			248			248
Other intangible assets		86			2,862			2,948
Property, plant & equipment		220			0			220
Right-of-use assets		24			0			24
Deferred tax assets		1,743			(46	)		1,698
Other non-current financial assets		64			0			64
Inventory		794			265			1,059
Trade receivables		1,096			0			1,096
Other current assets		1,001			0			1,001
Cash & cash equivalents		189			0			189
Total Assets		5,217			8,149			13,366
Liabilities
Deferred tax liabilities		0			(2,003	)		(2,003	)
Loans & borrowings		(1,877	)		0			(1,877	)
Lease liabilities		(24	)		0			(24	)
Trade payables		(645	)		0			(645	)
Payroll related payables		(85	)		0			(85	)
Other liabilities		(262	)		0			(262	)
Total Liabilities		(2,893	)		(2,003	)		(4,896	)
Total identified assets and liabilities		2,324			6,146			8,470
Goodwill		0			1,175			1,175
Acquisition price		0			0			9,645

F-3

Table of Contents

The cash flow from the business combination was as follows:


Cash & cash equivalents acquired	(189	)
Acquisition price in cash RS Print shares	5,220
Acquisition price in cash RS Scan assets	3,000
Total cash flow	8,031

The fair value

of the identifiable assets and liabilities included in our consolidated financial statements as per December 31, 2020 were provisional as the final valuation had not been completed by the date these consolidated financial statements were approved for issue by the board of directors. As of October 2021, we completed the fair value analysis of the Materialise Motion business combination, which resulted in corresponding adjustments to the goodwill, consolidated reserves and deferred tax assets and deferred tax liabilities. The fair value of the identified assets and liabilities was K€1,743 higher than the provisional value at date of acquisition, with a corresponding reduction in goodwill of K€1,743. We refer to Note 2 for the detailed impact of the

retrospective adjustment

resulting from the final accounting of the Materialise Motion business combination.

The accounting for the business combination resulted in fair values at date of acquisition of K€4,820 for developed technology based on the relief-from-royalty valuation method with royalty rates between 8.00% and 10.00% (remaining useful life of 7 years), K€248 for customer relationships based on the multi-period excess earnings method (remaining useful life of 15 years) and K€2,862 for contracts based on the multi-period excess earnings method (remaining useful life of

years). A fair value adjustment was identified of K€265 for the inventory. At the same time, a deferred tax liability was recognized of K€(2,049) on these adjusted fair values. Upon the completion of the accounting for the business combination in 2021, the deferred tax assets were adjusted by K€

1,743

. The discount rate

(post-tax

WACC) used for the valuation was set at 15.80%. The carrying value of the acquired receivables, the trade and other receivables approximate their fair value due to the short term character of these instruments.

There are no contingent considerations payable.

The goodwill recognized is primarily attributable to the trained and knowledgeable workforce and to the expected synergies that will be realized at the level of development, manufacturing and the existing customer base. The goodwill is not deductible for income tax purposes.

Acquisitions in 2019

Engimplan

The Group executed a share purchase agreement dated August 6, 2019 and acquired 40% of the shares and voting interest of Engimplan Engenharia de Implante Indústria e Comércio Ltda (referred to as “Engimplan”) for a total purchase consideration in cash of K€6,647.

As part of this transaction, the Group increased its shareholding in Engimplan to 75% with a capital increase of K€5,750 in cash in Engimplan.

The Brazilian-based company is specialist in manufacturing of orthopaedic and cranio-maxillofacial (CMF) implants and instruments.

F-3

Table of Contents

The fair value of the identifiable assets and liabilities at the date of acquisition were:


in 000€	Carrying value at acquisition date			Fair value adjustments		Fair value at acquisition date
Assets
Software		214			0		214
Customer relations		0			2,530		2,530
Trademarks		0			556		556
Other intangible assets		9			0		9
Property, plant & equipment		2,268			838		3,106
Right-of-use assets		633			0		633
Other non-current financial assets		3			0		3
Inventory		2,084			96		2,180
Trade receivables		1,802			0		1,802
Other current assets		391			0		391
Cash from capital increase		5,750			0		5,750
Cash & cash equivalents		316			0		316
Total Assets		13,470			4,020		17,490
Liabilities
Deferred income		(83	)		—		(83	)
Loans & borrowings		(1,443	)		0		(1,443	)
Lease liabilities		(633	)		0		(633	)
Trade payables		(271	)		0		(271	)
Tax payables		(100	)		0		(100	)
Payroll related payables		(298	)		0		(298	)
Other liabilities		(914	)		0		(914	)
Total Liabilities		(3,742	)		0		(3,742	)
Total identified assets and liabilities		9,728			4,020		13,748
Goodwill		0			0		2,071
Non-controlling interest		0			0		(3,422	)
Acquisition price		0			0		12,397

The cash flow from the business combination was as follows:


Cash & cash equivalents acquired	(316	)
Cash from capital increase	(5,750	)
Acquisition price in cash	12,397
Total cash flow	6,331

The fair value

of the identifiable assets and liabilities included in our consolidated financial statements per December 31, 2019 were provisional as the final valuation had not been completed by the date these consolidated financial statements were approved for issue by the board of directors. As of July 16th, 2020, we completed the fair value analysis of the Engimplan business combination, which resulted in corresponding adjustments to the goodwill, property, plant and equipment. The fair value of the identified assets and liabilities were K€736 higher than the provisional value at date of acquisition, with a corresponding reduction in goodwill of K€567 and increase of

non-controlling

interest of K€169.

The accounting for the business combination resulted in fair values at date of acquisition of K€2,530 for customer relationships, K€556 for trademarks; to property, plant and equipment a final fair value of K€3,106 was attributed. A fair value adjustment was identified of K€96 for the inventory. The carrying value of the acquired receivables, the trade and other receivables approximate their fair value due to the short term character of these instruments

There are no contingent considerations payable.

The goodwill recognized is primarily attributable to the trained and knowledgeable workforce and to the expected synergies that will be realized at the level of manufacturing and the existing customer base. The goodwill is not deductible for income tax purposes.

F-3

Table of Contents

5 Goodwill

The goodwill has been allocated to the cash generating units (“CGU”) as follows:


	As of December 31,
in 000€	2021		2020*		2019
CGU: MAT Software		3,241		3,241		3,241
CGU: e-Prototypy		743		749		800
CGU: ACTech		8,812		8,812		8,812
CGU: OrthoView		4,755		4,445		4,683
CGU: MAT NV Manufacturing (Metal)		0		177		177
CGU: Engimplan		0		0		1,894
CGU: Materialise Motion*		1,175		1,175		0
Total		18,726		18,599		19,607

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The changes in the carrying value of the goodwill can be presented as follows for the years 2021, 2020 and 2019:


in 000€	Gross			Impairment			Total
At January 1, 2019		17,595			(104	)		17,491
Additions		1,864			0			1,864
Currency translation		252			0			252
At December 31, 2019		19,711			(104	)		19,607
Additions		1,175			0			1,175
Impairment		0			(1,367	)		(1,367	)
Currency translation		(816	)		0			(816	)
At December 31, 2020*		20,070			(1,471	)		18,599
Additions		0			0			0
Impairment		0			(177	)		(177	)
Currency translation		304			0			304
At December 31, 2021		20,374			(1,648	)		18,726

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The goodwill of Orthoview (UK) and

e-Prototypy

(PL) include respectively K€310 and K€(6) impact of currency translation in 2021.

The Group has performed an impairment test for all CGUs, estimating the

Value-in-Use

based on a discounted cash flow model with cash flows for the next five years derived from the budget and a residual value considering a perpetual growth rate. The MAT Software CGU is included in the reportable segment “Materialise Software”. The CGUs ACTech,

e-Prototypy

(PL), MAT NV Manufacturing (Metal) and Materialise Motion are included in the reportable segment “Materialise Manufacturing”. The CGU Orthoview (UK) is included in the reportable segment “Materialise Medical”.

CGU: MAT Software

The goodwill allocated to the CGU MAT software relates to the goodwill from the acquisition of Cenat in 2015 and the goodwill related to the acquisition of Marcam in 2011

(DE-3D

Printing Software).

F-3

Table of Contents

The impairment test is based on the discounted cash flows resulting from the CGU MAT Software, considering a period of five years. The main assumptions for goodwill impairment testing include a discount rate (based on WACC) of 7.40% (8.06%

pre-tax)

and a perpetual growth rate of 5%. Other assumptions include the

year-on-year

growth rate of the revenue, gross margin and the operating costs which has been determined by management based on past experience. It was concluded that the value in use is higher than the carrying value of the cash generating unit of K€42,170. Based on the sensitivity analyses performed by the Group, including analyses whereby the discount rate would increase by 100 basis points or the perpetual growth rate would be 0, there are no reasonably possible changes in assumptions that would reduce the value in use below the carrying value of the cash generating unit.

CGU

e-Prototypy

The goodwill relates to the acquisition of the Polish entity

e-Prototypy

. The impairment test on the CGU

e-Prototypy

is based on the discounted cash flows considering a period of five years. The main assumptions include a discount rate (based on WACC) of 9.90% (11.30%

pre-tax)

and a perpetual growth rate of 2%. Other assumptions include the

year-on-year

growth rate of the revenue, gross margin and the operating costs which has been determined by management based on past experience and continued investments in capex in new 3D printing equipment. It was concluded that the value in use is significantly higher than the carrying value of the cash generating unit of K€3,519. Based on the sensitivity analyses performed by the Group, including analyses whereby the discount rate would increase by 100 basis points or the perpetual growth rate would be

there are no reasonably possible changes in assumptions that would reduce the value in use below the carrying value of the cash generating unit.

CGU ACTECH

The impairment test on the CGU ACTech is based on the discounted cash flows, considering a period of 5 years. The main assumptions include a discount rate (based on WACC) of 6.36% (8.72%

pre-tax)

and a perpetual growth rate of 1%. Other assumptions include the

year-on-year

growth rate of the revenue, gross margin and the operating costs which have been determined by management based on past experience. It was concluded that the value in use is higher than the carrying value of the cash generating unit of K€25,932. Based on the sensitivity analyses performed by the Group, including analyses whereby the discount rate would increase by 100 basis points or the perpetual growth rate would be 0, there are no reasonably possible changes in assumptions that would reduce the value in use below the carrying value of the cash generating unit.

CGU Orthoview

The goodwill relates to the acquisition of Orthoview. The impairment test on the CGU Orthoview is based on the discounted cash flows considering a period of 5 years. The main assumptions include a discount rate (based on WACC) of 8.05% (9.60%

pre-tax)

and a perpetual growth rate of 1%. Other assumptions include the

year-on-year

growth rate of the revenue, gross margin and the operating costs which have been determined by management based on past experience. It was concluded that the value in use is higher than the carrying value of the cash generating unit of K€12,460. Based on the sensitivity analyses performed by the Group, including analyses whereby the discount rate would increase by 100 basis points or the perpetual growth rate would be 0, there are no reasonably possible changes in assumptions that would reduce the value in use below the carrying value of the cash generating unit.

The Orthoview business is being integrated further in the existing software business within our Materialise Medical segment. Synergies that are expected from joined product lines are not taken into account in the current impairment review as management believes that Orthoview can still be considered a separate cash generating unit in 2021.

CGU MAT NV Manufacturing Metal (Aldema)

The goodwill related to the acquisition of the Belgian entity Aldema BV in 2015, classified under the CGU Metal Prodution in Belgium. With the Materialise Metal Competence Center established in Bremen, Germany, the carrying value of this asset decreased to 0 resulting in the full impairment of the K€177 goodwill.

CGU Engimplan

The impairment test on the CGU Engimplan is based on the discounted cash flows, considering a period of 5 years. The main assumptions include a discount rate (based on WACC) of 15.49% (18.17%

pre-tax)

and a perpetual growth rate of 7%, supported by an expected long term inflation rate of 3.5%, continued growth opportunities from the increase of the standard of living in Brazil (including access to medical and health care insurances), a growing population in Brazil and export opportunities in Latin America. Other

key

assumptions include the

year-on-year

growth rate of the revenue, gross margin and the operating costs which have been determined by local & new management based on past experience. At December 31, 2020, the Group has recorded a full impairment of the goodwill of K€1,367 as well as a partial impairment on customer lists and trade marks for respectively K€942 and K€207. The impairment test at December 31, 2021, did not indicate the need for a further impairment nor for a reversal of the previously recorded impairment charges. Based on the sensitivity analysis performed by the Group whereby the perpetual growth rate would decrease by

100 basis points

, the value in use would be K€25 below the carrying value of the cash

generating unit. Based on the sensitivity analysis performed by the Group whereby the discount rate would

increase

by 100 basis points, the value in use would be K€194 below the carrying value of the cash generating unit.

F-3

Table of Contents

CGU Materialise Motion

The impairment test on the CGU Materialise Motion is based on the discounted cash flows, considering a period of 5 years. The main assumptions include a discount rate (based on WACC) of 7.40% (9.00%

pre-tax)

and a perpetual growth rate of 1%. Other assumptions include the

year-on-year

growth rate of the revenue, gross margin and the operating costs which have been determined by management based on past experience. It was concluded that the value in use is higher than the carrying value of the cash generating unit of K€8,103. Based on the sensitivity analyses performed by the Group, including analyses whereby the discount rate would increase by 100 basis points or the perpetual growth rate would be 0, there are no reasonably possible changes in assumptions that would reduce the value in use below the carrying value of the cash generating unit.

F-3

Table of Contents

6 Intangible assets

The changes in the carrying value of the intangible assets can be presented as follows for the years 2021, 2020 and

2019:


in 000€	Patents and licenses			Software			Acquired customers, technology			Developed technology and software under construction			Total
Acquisition value
At December 31, 2018		4,294			8,241			25,579			1,315			39,429
Additions		209			656			0			1,328			2,193
Acquisition of a subsidiary		38			214			3,048			9			3,309
Disposals		0			(45	)		(32	)		0			(77	)
Transfer between accounts		(109	)		1,601			0			(988	)		504
Currency translation		1			(10	)		86			20			97
Other		3			10			0			(32	)		(19	)
At December 31, 2019		4,436			10,667			28,681			1,652			45,436
Additions		378			3,072			0			3,168			6,618
Acquisition of a subsidiary		0			0			7,931			86			8,017
Disposals		(226	)		(2,227	)		0			(68	)		(2,521	)
Transfer between accounts		75			47			0			(180	)		(58	)
Currency translation		(1	)		(65	)		(1,128	)		0			(1,194	)
Other		0			0			0			0			0
At December 31, 2020		4,662			11,494			35,484			4,658			56,298
Additions		660			70			0			3,058			3,788
Acquisition of a subsidiary		0			0			0			0			0
Disposals		(153	)		(23	)		0			(65	)		(242	)
Transfer between accounts		272			162			2			(496	)		(60	)
Currency translation		1			6			386			0			393
Other		0			0			0			0			0
At December 31, 2021		5,442			11,709			35,872			7,155			60,177

F-

Table of Contents


in 000€	Patents and licenses			Software			Acquired customers, technology and backlogs			Developed technology and software under construction			Total
Amortization & Impairments
At December 31, 2018		(2,661	)		(5,080	)		(5,362	)		0			(13,103	)
Amortization charge for the year		(246	)		(2,582	)		(2,031	)		0			(4,859	)
Disposals		0			23			0			0			23
Transfer between accounts		109			(96	)		0			0			13
Currency translation		0			(25	)		(126	)		0			(151	)
Other		0			20			16			0			36
At December 31, 2019		(2,798	)		(7,740	)		(7,503	)		0			(18,041	)
Amortization charge for the year		(465	)		(2,223	)		(2,021	)		0			(4,709	)
Impairments		0			0			(1,149	)		(2,090	)		(3,239	)
Disposals		211			2,119			0			(22	)		2,308
Transfer between accounts		0			109			0			0			109
Currency translation		1			14			240			0			255
Other		0			0			0			0			0
At December 31, 2020		(3,051	)		(7,721	)		(10,433	)		(2,112	)		(23,317	)
Amortization charge for the year		(392	)		(1,831	)		(2,523	)		0			(4,746	)
Impairments		0			(231	)		0			0			(231	)
Disposals		107			23			0			0			131
Transfer between accounts		(1	)		(33	)		(0	)		22			(12	)
Currency translation		(1	)		(5	)		(287	)		0			(293	)
Other		0			(41	)		0			0			(41	)
At December 31, 2021		(3,337	)		(9,839	)		(13,244	)		(2,090	)		(28,510	)
Net carrying value
At December 31, 2021		2,105			1,869			22,628			5,065			31,668
At December 31, 2020		1,611			3,773			25,051			2,546			32,981
At December 31, 2019		1,638			2,927			21,178			1,652			27,395
At January 1, 2019		1,633			3,161			20,217			1,315			26,326

Patent and licenses include only the directly attributable external costs incurred in registering the patent and obtaining the license. Software relates to purchased software for internal use

and in-house developed technology

. The remaining amortization period is 1.1 years for the main software purchases and 5.6 years for the main patents and licenses.

The ‘Acquired customers and technology’ have been recognized as part of the acquisition of Materialise Motion, Engimplan, ACTech,

E-Prototypy,

OrthoView, and Cenat (see Note 4). At December 31, 2021, the remaining amortization period for the acquired customers is 13.83 years for

Materialise Motion, 7.58 years for Engimplan, 15.75 years for ACTech, 2.75 years for OrthoView, fully amortized for

E-Prototypy

and 3.25 years for Cenat . At December 31, 2021, the remaining amortization period for the acquired technology and contracts is 5.83 years for Materialise Motion.

The net book value of developed technology and software under construction at December 31, 2021 relates primarily to the internal digitalization program and the transformation of our platform architecture.

The total amortization charge for 2021 is K€4,746 (2020: K€4,709; 2019: K€4,859). As from 2017 the amortization of intangible assets from business combinations is mainly included in the line net operating income of the consolidated income statement.

F-

Table of Contents

7 Property, plant & equipment

The changes in the carrying value of th

property, plant & equipment can be presented as follows for the year 2021, 2020 and 2019:


in 000€	Land and buildings			Plant and equipment			Right-of-use assets			Construction in progress			Total
Acquisition value
At January 1, 2019		45,777			77,557			14,327			3,002			140,663
Impact of adoption of IFRS 16		—			—			4,984			—			4,984
Additions		302			7,363			3,429			5,807			16,901
Acquired from business combinations		61			3,046			633			17			3,757
Disposals		(37	)		(6,091	)		(753	)		—			(6,881	)
Transfers		(3,360	)		7,077			117			(4,338	)		(504	)
Currency Translation		150			199			8			6			363
Other		—			(73	)		(1,099	)		(80	)		(1,252	)
At December 31, 2019		42,893			89,078			21,646			4,414			158,031
Additions		256			2,600			4,567			8,175			15,598
Acquired from business combinations		—			220			24			—			244
Disposals		—			(2,953	)		(1,657	)		(38	)		(4,648	)
Transfers		(15	)		7,961			(4,010	)		(3,886	)		50
Currency Translation		(717	)		(2,486	)		(423	)		(26	)		(3,652	)
At December 31, 2020 *		42,417			94,420			20,147			8,639			165,623
Additions		462			5,259			2,397			2,213			10,331
Disposals		—			(3,682	)		(1,191	)		(779	)		(5,652	)
Transfers		4,099			6,673			(1,249	)		(8,296	)		1,227
Currency Translation		183			598			103			4			888
At December 31, 2021		47,161			103,268			20,207			1,781			172,417
Depreciation
At January 1, 2019		(6,071	)		(33,307	)		(8,441	)		(307	)		(48,126	)
Depreciation charge for the year		(1,199	)		(9,162	)		(4,058	)		—			(14,419	)
Acquired from business combinations		—			—			—			—			—
Disposals		36			5,704			359			—			6,099
Transfers		200			(1,551	)		1,031			307			(13	)
Currency Translation		(25	)		(190	)		(2	)		—			(217	)
Other		220			(34	)		51			—			237
At December 31, 2019		(6,839	)		(38,540	)		(11,060	)		—			(56,439	)
Depreciation charge for the year		(1,223	)		(10,205	)		(3,504	)		—			(14,932	)
Disposals		—			2,632			1,518			—			4,150
Transfers		(11	)		(3,961	)		3,810			—			(162	)
Currency Translation		66			872			85			—			1,023
At December 31, 2020		(8,007	)		(49,202	)		(9,151	)		—			(66,360	)
Depreciation charge for the year		(1,344	)		(10,590	)		(3,640	)		—			(15,574	)
Disposals		—			3,594			1,166			—			4,760
Transfers		(143	)		(1,595	)		515			—			(1,223	)
Currency Translation		(92	)		(380	)		(41	)		—			(513	)
At December 31, 2021		(9,586	)		(58,173	)		(11,151	)		—			(78,910	)
Net book value
At December 31, 2021		37,575			45,095			9,056			1,781			93,507
At December 31, 2020		34,410			45,218			10,996			8,639			99,263
At December 31, 2019		36,054			50,538			10,586			4,414			101,592
At January 1, 2019		39,706			44,250			5,886			2,695			92,537

F-4

Table of Contents

The investments in property, plant & equipment and

right-of-use

assets in 2021 amounted to K€10,331 (2020:K€15,598). They are mainly related to new machines and installations (K€3,635), land and buildings (K€2,224), IT equipment (K€2,126) and leased vehicles (K€769). The investments in 2020 related to new machines and installations (K€5,011), land and buildings (K€7,580), IT equipment (K€1,056) and leased vehicles (K€1,714). The investments in 2019 related to new machines and installations (K€7,757), land and buildings (K€4,865), IT equipment (K€1,268) and leased vehicles (K€1,119).

The Group realized a net loss on disposal of property, plant and equipment of K€210 in 2021 (2020: a net loss of K€10; 2019: a net loss of K€165).

No impairment of property, plant and equipment was recorded in 2021, 2020 and 2019.

The transfers in 2021 within property, plant and equipment are mainly related to

•

the transfers from

construction

in progress towards Land & Buildings and Plant & Equipment of K€8,296

mainly related to the new metal production site in Bremen.

•

the transfer from

Right-of-Use

of assets to Plant and Equipment due to the obtaining of the ownership for a net book value of K€168.

Assets under construction

Per December 31, 2021 the main assets under construction

were

related to our new metal production facility in USA for an amount of K€547 and a printer for our plastic production in Belgium for K€540.

Changes in useful life for certain assets in 2019

The Group reviews the useful life for the intangible assets and property, plant and equipment on an annual basis considering the current facts and circumstances available. This review resulted in 2019 in a

re-assessment

of the useful life for certain specific assets in the categories buildings, fixtures, vehicles and machinery. The impact of the change in useful life during the year 2019 resulted in a decrease of the depreciation charges for the year ended December 31, 2019 by K€1,147.

The depreciation charge for 2020 and 2021 was calculated to decrease by

K€478 and K€276

respectively. The effect will be neutralized in 2028 for machines, in 2033 for fixtures and in 2048 for buildings.

The right of use assets can be presented as follows:

The carrying value of

Right-of-Use

assets at December 31, 2021 was K€9,054 (2020: K€10,996; 2019: K€10,586).

Right-of-Use

assets are mainly

related to buildings with a carrying value of K€4,419 at December 31, 2021 (2020: K€4,917; 2019: K€3,783) and for which depreciation of K€1,794 was recorded in 2021 (2020:K€1,620; 2019:K€1,953). New leases in 2021 amount to K€2,396 of which K€1,624 related to leased buildings (2020:K€2,397; 2019:K€2,855).

F-4

Table of Contents


in 000€	Buildings			Vehicles			Equipment			Total
Acquisition value
At January 1, 2020		6,488			4,275			10,883			21,646
Additions		2,397			1,738			433			4,568
Acquired from business combinations		0			0			24			24
Modifications		0			0			0			0
Disposals		(1,214	)		(291	)		(152	)		(1,657	)
Currency Translation		(372	)		(10	)		(41	)		(423	)
Transfers		275			(1,157	)		(3,129	)		(4,011	)
Other		0			0			0			0
At December 31, 2020		7,574			4,555			8,018			20,147
Additions		1,624			710			62			2,396
Disposals		(1,022	)		(268	)		(281	)		(1,571	)
Currency Translation		96			3			3			102
Transfers		(151	)		(112	)		(605	)		(868	)
At December 31, 2021		8,121			4,888			7,197			20,206
Depreciation
At January 1, 202 0		(2,705	)		(2,030	)		(6,325	)		(11,060	)
Depreciation charge for the year		(1,620	)		(1,129	)		(755	)		(3,504	)
Disposals		1,175			272			71			1,518
Transfers		446			992			2,373			3,811
Currency Translation		47			4			33			84
Other		0			0			0			0
At December 31, 2020		(2,657	)		(1,891	)		(4,603	)		(9,151	)
Depreciation charge for the year		(1,794	)		(1,236	)		(610	)		(3,640	)
Disposals		639			257			270			1,166
Currency Translation		(41	)		(2	)		2			(41	)
Transfers		151			74			289			514
At December 31, 2021		(3,702	)		(2,798	)		(4,652	)		(11,152	)
Net book value
At December 31, 2021		4,419			2,090			2,545			9,054
At January 1, 2021		4,917			2,664			3,415			10,996

The following amounts related to leases are recognized in profit & loss


(in 000€)	2021
Depreciation expense		(3,640	)
Interest expense on lease liabilities		(289	)
Expenses related to short-term leases/ low-value assets/ variable lease payments		(537	)

The Group has negotiated several contracts with extension and termination options because of common practice in the country or for the asset. Management has exercised significant judgments in determining wheth

r these extension and termination options are reasonably certain to be exercised. The potential future cash flows beyond the period following the exercise of the extension and termination option that are not included in the lease term are presented in the following table:


(in 000€)	2021
Potential (non-discounted) cash flows for terminations options that are not reasonably certain to be exercised:		3,015
Potential (non-discounted) cash flows for extensions options that are reasonably certain to be exercised		1,560

Pledges

Land and buildings (including buildings under construction) with a carrying amount of K€24,451 (2020: K€25,364; 2019: K€26,270) are subject to pledges to secure several of the Group’s bank loans. In addition, pledges have been given on machines with a total carrying amount of K€1,131 (2020: K€2,274; 2019: K€2,884) (Note 24).

F-4

Table of Contents

8 Investments in joint ventures

As at December 31, 2021, Materialise has no investments in joint ventures.

The changes in the carrying value of the joint v

ntures can be presented as follow for the years 2021, 2020 and 2019:


in 000€
Carrying value as of December 31, 2018	0
Additional investment	875
Transfer from receivables	(444	)
Share in loss	(392	)
Carrying value as of December 31, 2019	39
Additional investment	0
Transfer from receivables	0
Share in loss of the Joint venture	(39	)
Gain from remeasurement previously held equity method investment at fair value	770
Accounted for as Business Combination	(770	)
Carrying value as of December 31, 2020	0
Additional investment	0
Transfer to receivables	0
Share in loss of the Joint venture	0
Gain from remeasurement previously held equity method investment at fair value	0
Accounted for as Business Combination	0
Carrying value as of December 31, 2021	0

9 Inventories and contracts in progress

Inventories and contracts in progress include the following:


	As of December 31,
in 000€	2021		2020		2019
Raw materials		6,246		4,974		7,400
Work in progress		2,383		1,766		2,806
Finished goods		2,171		2,554		1,995
Contracts in progress		495		749		495
Total inventories and contracts in progress		11,295		10,043		12,696

Inventory written-off on the balance sheet amounted to

K€1,196 for the year ended December 31, 2021 (2020: K€567; 2019: K€526). The expenses are recorded in Cost of Sales.

The Group has contracts in progress and advances from customers. The total costs incurred is

K€426 and the profit recognized is K€69 as per December 31, 2021. Advances were received for the amount of K€11 with respect to contracts in progress per end of 2021 (2020: K€146; 2019: K€22).

F-4

Table of Contents

10 Other assets

Other

non-current

assets

Other

non-current

assets include the following:


Investments in convertible loans	As of December 31,
in 000€	2021		2020		2019
Convertible loan		3,560		6,203		2,750
Total		3,560		6,203		2,750

The Group granted a convertible loan to Fluidda in January 2019, with a notional amount of K€2,500. The convertible loan is accounted for as a financial asset measured at fair value with changes in fair value through the income statement. The carrying value of the convertible loan amounts to K€3,560 at December 31, 2021. The convertible loan has a duration of 7 years with a 10% annual interest rate which is capitalized. We refer to Note 3 and Note 20.


Investments in non-listed equity instruments	As of December 31,
in 000€	2021		2020		2019
Non-listed equity investments		399		3,842		3,046
Total		399		3,842		3,046

At December 31, 2021, the Group remeasured the fair value of its equity investment in Essentium, Inc. to zero, recognizing a K€3,443 fair value adjustment in other comprehensive income. We refer to Note 3 and Note 20.

In addition, Materialise continues to hold an equity investment in AM Danube BV (holding company for AM Flow Holding BV), which had a fair value of K€307 at December 31, 2021. We also refer to Note 3 and Note 20.

The remainder of K€92 relates to an investment in the African Drive NV, which runs the African Drive project in Benin.


Other non-current assets	As of December 31,
in 000€	2021		2020		2019
Tax credits		4,044		3,381		3,015
Guarantees and deposits		447		528		415
Non-current receivable on joint venture		—		—		138
Loan to Link3D incl capitalized interest		2,249		—		—
LT deferred charges		741		—		—
Other		38		184		27
Total		7,519		4,093		3,595

The

non-current

tax credits mainly relate to Belgian R&D tax credits, recoverable between 2023 and 2027.

On February 3, 2021, the Group concluded an interim loan agreement with Link3D, Inc. (“Link3D”) for the principal amount of K$700. In connection wih the call option entered into as of April 9, 2021, the Group has

concluded

an additional loan for the principal amount of K$1,800 million. The aggregate principal amount of

K$2,500, carries interest

based on the Prime rate

(

3.25

for 2021) and

has a maturity date of

April 9, 2031

As set out in Note 4, the Group completed the acquisition of Link3D on January 4, 2022.

F-4

Table of Contents

Other current assets

Other current assets include the following:


	As of December 31,
in 000€	2021		2020		2019
Deferred charges		2,958		2,841		2,632
Tax credits		673		1,243		695
Accrued income		384		260		486
Other tax receivables		1,459		1,125		3,127
Grants		1,021		1,181		754
Other non-trade receivables		2,445		1,640		922
Total other current assets		8,940		8,290		8,616

The other tax receivables included Value Added Tax (VAT) receivables and corporate tax receivables.

The other non-trade receivables

as at December 31, 2021 included the value of the option purchased by the Group to acquire Link3D, for an amount of $ 2 million.

F-4

Table of Contents

11 Trade receivables

The trade receivables include the following:


	As of December 31,
in 000€	2021			2020			2019
Trade receivables		42,814			32,346			42,509
Allowance for doubtful accounts		(1,273	)		(1,475	)		(1,532	)
Total		41,541			30,871			40,977

Trade receivables are

non-interest

bearing and are generally on payment terms of 30 to 90 days.

As at December 31, 2021, trade receivables of an initial value of K€1,273 (2020: K€1,475; 2019: K€1,532) were impaired as part of the expected credit losses analysis. Impairment is account

d for under the other operating expenses. See below for changes in the impairment of receivables.


in 000€
At January 1, 2019	(1,873	)
Addition	(141	)
Usage	131
Reversal	351
At December 31, 2019	(1,532	)
Addition	(852	)
Usage	301
Reversal	608
At December 31, 2020	(1,475	)
Addition	(689	)
Usage	259
Reversal	632
At December 31, 2021	(1,273	)

F-4

Table of Contents

12 Cash and cash equivalents

Cash and cash equivalents include the following:


	As of December 31,
in 000€	2021		2020		2019
Cash at bank		192,895		108,399		123,337
Cash equivalents		3,133		3,139		5,560
Total		196,028		111,538		128,897

For the year ended December 31, 2021, cash at banks in euro earned a negative interest (K€223), based on floating interest rates. Cash at banks in other currencies earns interest at floating rates based on daily bank deposit rates. Cash equivalents include short-term deposits which are made for varying periods between one day and three months, depending on the immediate cash requirements of the Group, and earn interest at the respective short-term deposit rates.

There were 0 cash balances on a restricted bank account per December 31, 2021, 2020 or 2019.

F-47

Table of Contents

13 Equity

Share capital

The share capital of the parent company Materialise NV consists of 59,063,521 ordinary nominative shares at December 31, 2021 (2020: 54,169,257; 2019: 53,172,513) with no nominal but par value of €0.076 in 2021 (2020: €0.076; 2019: €0.058) for a total amount of K€4,487 at December 31, 2021 (2020:K€4,096; 2019:K€3,066).


in 000€, except share data	Total number of ordinary shares			Total share- holders’ capital			Total share- premium
Outstanding at Jauary 1, 2019		52,890,761			3,050			136,637
Capital increase through exercise of warrants		281,752			16			1,252
Equity-settled share-based payments expense		—			—			201
Outstanding at December 31, 2019		53,172,513			3,066			138,090
Capital increase through exercise of warrants		487,840			30			3,082
Capital increase through exercise of convertible bonds		508,904			1,000			—
Equity settled share-based payments expense		—			—			103
Merger with Ailanthus NV		13,428,688			1,862			—
Cancellation treasury shares (Ailanthus NV)		(13,428,688	)		(1,862	)		—
Outstanding at December 31, 2020		54,169,257			4,096			141,275
Capital increase through exercise of warrants		294,264			22			2,322
Capital increase through public offering		4,600,000			371			90,235
Equity settled share-based payments expense		—			—			41
Outstanding on December 31, 2021		59,063,521			4,489			233,872

The shareholders’ capital increased by K€22 in 2021 as a result of the exercise of warrants outstanding and fully vested. The number of new shares issued was 294,264 at an average price of €8,

per share, including share premium.

The shareholders’ capital increased by K€371 in 2021 as a result of th

capital increase through public offering. The number of new shares issued was 4,600,000 at an average price of €19.7

per share, including share premium.

Share premium

In Belgium, the portion of the capital increase in excess of par value is typically allocated to share premium.

The carrying value of the share premium is K€233,872 at December 31, 2021 (2020: K€141,275; 2019: K€138,090). The change in 2021 is the result of:

•

The capital increase via exercise of warrants of K€2,322; and

•

The share-based payment expense of K€

;

•

The public offering of K€

90,235

The change in 2020 is the result of the share-based payment K€103 and the capital increase via exercise of warrants of K€3,082. The change in 2019 is the result of the share-based payment expense of K€201 and the capital increase via exercise of warrants of K€1,252.

F-4

Table of Contents

Other reserves

The nature and purpose of the other reserves is as follows:


	As of December 31,
in 000€	2021			2020			2019
Legal reserve		279			279			279
Other reserves		1,987			2,574			(335	)
Equity-settled share-based payment expense		72			72			72
Other Comprehensive Income (loss)		(9,087	)		(7,796	)		(1,394	)
Other reserves		(6,749	)		(4,871	)		(1,378	)

Based on the statutory result and after final result allocation approved by the annual shareholders meeting the legal reserve is increased by reserving 5% of the yearly statutory profit until the l

gal reserve reaches at least 10% of the shareholders’ capital. The legal reserve cannot be distributed to the shareholders.

The Group did

t pay any dividend during 2021, 2020 and 2019.

Other comprehensive loss

Other comprehensive loss consists of the

following:


in ‘000€	Currency Translation Differences & Other			Fair value adjustment equity investments			Total OCI attributable to the shareholder
At January 1, 2019		(1,850	)		—			(1,850	)
Currency translation impact		456			—			456
At December 31, 2019		(1,394	)		—			(1,394	)
Currency translation impact		(6,025	)		—			(6,025	)
Fair value adjustment		—			489			489
Acquisition non-controlling interest—OCI		(866	)		—			(866	)
At December 31, 2020		(8,285	)		489			(7,796	)
Currency translation impact		2,152			—			2,152
Fair value adjustment		—			(3,443	)		(3,443	)
At December 31, 2021		(6,133	)		(2,954	)		(9,087	)

Non-controlling

interest

In 2019 a

non-controlling

interest was recognized for 25% held by a third party in

Engimplan

for an amount of K€3,276 per end of 2019.

As of December 1, 2020, Materialise acquired the remaining

non-controlling

interest held by a third party in Engimplan in return for the Spine business line. The

non-controlling

interest with a carrying amount of K2,213 was derecognized.

As of June 22, 2021, the Group, together with Zhenyuan (Tianjin) Medical Appliances Technology Co., Ltd., incorporated a new subsidiary with the name Tianjin Zhenyuan Materialise Medical Technology Limited Company. This entity will be responsible for all regulatory requirements regarding the Materialise Mimics Enlight Lung Software on the Chinese market. Both Materialise and Zhenyuan will work on development and distribution, in a collaborating manner. Materialise holds 51% of the shares, Zhenyuan 49%. In 2021, in respect of this majority-owned subsidiary, a

non-controlling

interest has been recognized, which had a carrying value of K€1 at December 31, 2021.

RapidFit+

At October 8, 2021, PMV, who owned 16.66% of the shares of our subsidiary RapidFit NV, executed their put option at the redemption amount of K€

875

. Prior to the execution, this put option was recognized as a financial liability and measured at the fair value of the redemption amount.

F-

Table of Contents

14 Share-based payment plans

Share-based payment plans of the parent

The changes of the year for the warrant plans are as follows:


	2021			2020			2019
Outstanding at January 1		407,722			965,052			1,318,049
Granted		0			0			0
Forfeited / Cancelled		(7,193	)		(41,443	)		(42,952	)
Exercised		(317,579	)		(515,887	)		(310,045	)
Outstanding at December 31		82,950			407,722			965,052
Exercisable at December 31		78,405			123,305			296,859

The Group’s share-based payment plans are all equity-settled exc

pt for the IPO warrants that have been granted to certain employees in certain countries due to legal requirements which are cash-settled. The outstanding amount includes stock appreciation rights (“SARs”) issued under cash-settled share-based payment plans.

The number of outstanding warrants has been adjusted to reflect the

1-to-4

stock split decided in June 2014. The 2013 warrant plan gives a right to four shares for each warrant, whereas under all other warrant plans one warrant gives a right to one share. For presentation purposes the tables reflect the number of shares the warrants give right to across all plans.

Equity-settled share-based payment plans

The Group has several plans in place (2013 warrant plan, IPO warrant plan and 2015 warrant plan) which have similar terms except for the exercise price, except for the 2015 warrant plan.

2013 warrant plan

Each warrant gives the right to the holder to four ordinary shares of the parent Company. The warrants have a contractual term of ten years and vest for 25% in the fourth year; 25% in the fifth year; 25% in the sixth year; and 25% in the seventh year. Warrants are exercisable as from the month after they have vested and in the subsequent exercise periods. There are no cash settlement alternatives and the Group does not have a practice of cash settlement for these warrants. The warrants have a contractual term of ten years.

Under the 2013 warrant plan 301,096 warrants were eff

ctively granted in October 2013 and 166,800 warrants were granted to certain employees and to certain members of our board of directors and senior management on November 28, 2013 with an exercise price ranging from €7.86 to €8.54.

The status of the 2013 warrant plan at December 31 is as follows:


	2021		2020			2019
Outstanding at January 1		0		118,376			300,040
Granted		0		0			0
Forfeited / Cancelled		0		(1,875	)		(3,500	)
Exercised		0		(116,501	)		(178,164	)
Outstanding at December 31		0		0			118,376
Exercisable at December 31		0		0			15,300

NaN warrants remained outstanding under the 2013 warrant plan at December 31, 2021.

IPO warrant plan

Each warrant gives the right to the holder to one ordinary share of the parent Company. The warrants have a contractual term of 10 years and vest for 25% in the fourth year; 25% in the fifth year; 25% in the sixth year and 25% in the seventh year. Warrants are exercisable as from the month after they have vested and in the subsequent exercise periods. There are no cash settlement alternatives and the Group does not have a practice of cash settlement for these warrants. The warrants have a contractual term of 10 years.

F-5

Table of Contents

The Group granted 979,898 warrants in July 2014 and 36,151 warrants in November 2014 in the context of the initial public offering to the employees of the Group with an exercise price of €8.81 (“IPO warrant plan”). The Group granted an additional 18,180 warrants to employees in July 2015 under the IPO warrant plan.

The status of the IPO warrant plan at December 31 is as follows:


	2021			2020			2019
Outstanding at January 1		236,726			465,212			589,052
Granted		0			0			0
Forfeited / Cancelled		(3,372	)		(27,247	)		(20,252	)
Exercised		(179,764	)		(201,239	)		(103,588	)
Outstanding at December 31		53,590			236,726			465,212
Exercisable at December 31		49,045			95,575			169,071

With respect to the warrants exercised in 2021, a total of 179,764 warr

nts representing 179,764

shares were exercised in the last quarter. The share price at exercise date was $23.31.

Warrant plan 2015

The board of directors decided on December 18, 2015 on a new plan (“2015 warrant plan”) by which it can grant up to 1,400,000 warrants to employees. Each warrant gives the right to the holder to one ordinary share of the parent Company. The warrants vest for 10% on the second anniversary of the granting; 20% on the third anniversary of the granting; 30% on the fourth anniversary of the granting; and 40% on the fifth anniversary of the granting, unless otherwise decided by the board of directors or one or more of its representatives granted powers thereto. Warrants are exercisable only after they have vested and only during a period of (i) four weeks following the publication of the results of the parent Company of the second and fourth quarter, or (ii) if no quarterly results are published, during the month March and the month September of every year. There are no cash settlement alternatives and the Group does not have a practice of cash settlement for these warrants. The warrants have a term of ten years.

The Group granted 350,000 warrants in July 2016 to the employees of the Group with an exercise price of €6.45. The Group granted 2,000 warrants to an employee in May 2018 with an exercise price of €10.08.

The status of the 2015 warrant plan at December 31 is as follows:


	2021			2020			2019
Outstanding at January 1		133,900			310,400			325,200
Granted		0			0			0
Forfeited / Cancelled		(2,000	)		(6,400	)		(14,800	)
Exercised		(114,500	)		(170,100	)		0
Outstanding at December 31		17,400			133,900			310,400
Exercisable at December 31		17,400			15,100			96,500

With respect to the warrants exercised in 2021, a total of 114,500 warrants representing 114,500

shares were exercised. The weighted average share price at exercise date was $23.35.

Fair value

The fair value of the warrants is estimated at the grant date using the Black-Scholes option pricing model, taking into account the terms and conditions upon which the warrants were granted.

F-5

Table of Contents

The following table provides the input to the Black-Scholes model for the 2013 warrant plan, IPO warrant plan and 2015 warrant plan:


	2015 (Sept 16)			2015 (Nov)			IPO 2014 (Nov)			IPO 2014 (June)			2013 (Dec) *			2013 (Oct) *
Return dividend		0	%		0	%		0	%		0	%		0	%		0	%
Expected volatility		47	%		47	%		50	%		46	%		50	%		53	%
Risk-free interest rate		0.24	%		1.17	%		1.12	%		1.70	%		2.56	%		2.43	%
Expected life		4.30			5.50			5.50			5.50			5.50			5.50
Exercise price (in €)		6.45			8.81			8.81			8.81			8.54			7.86
Stock price (in €)		6.42			8.08			8.67			8.81			18.09			18.09
Fair value SAR (in €)		2.41			3.30			3.94			3.83			12.23			12.77

(*)	Exercise price, stock price and fair value are not adjusted for the 1 to 4 stock-split completed in June 2014.

The above input for the Black-Scholes model have been determined based on the following:

•

The dividend return is estimated by reference to the historical dividend payments of the Group. Currently, this is estimated to be zero as no dividends have been paid since inception;

•

Expected volatility is estimated based on the average annualized volatility of the volatility of the Group’s stock (until September 2016: of a number of quoted peers in the 3D printing industry and the volatility of the Group’s stock);

•

Risk-free interest rate is based on the interest rate applicable for the 10Y Belgian government bond at the grant date;

•

Estimated life of the warrant is determined to be until the first exercise period which is typically the month after vesting; and

•

Fair value of the shares is determined based on the share price of the Group on Nasdaq at the date of valuation. For the grants prior to the initial public offering, the fair value of the shares was estimated based on a discounted cash flow model with

3-year

cash flow projections and a multiple of EBITDA determined based on a number of quoted peers in the 3D printing industry.

The expense arising from share-based payment transactions for the warrant plans mentioned above was K€41 (2020: K€102; 2019: K€401)

The weighted average remaining estimated life of the warrants outstanding as of December 31, 2021 is 3.13 years (2020: 4.31 years; 2019: 5.20 years). The weighted average fair value for the warrants outstanding at the end of 2021 was €3.39 (2020: €3.29; 2019: €4.48). The weighted average exercise price for the warrants outstanding at the end of 2021 was €8.07 (2020: €7.92; 2019: €7.88).

Cash-settled share-based payment plans

The Group has issued 215,688 SARs in July 2014 towards certain employees in certain countries due to legal requirements with similar terms and conditions as the IPO warrant plan except that the SAR will be settled in cash. The exercise price of the SAR is €8.81.

The status of this plan is as follows:


	2021			2020			2019
Outstanding at January 1		37,096			71,064			103,757
Granted		0			0			0
Forfeited / Cancelled		(1,821	)		(5,921	)		(4,400	)
Exercised		(23,315	)		(28,047	)		(28,293	)
Outstanding at December 31		11,960			37,096			71,064
Exercisable at December 31		11,960			12,630			15,988

The SAR plan grants the bearer the right to a cash payment equal to the difference between the exercise price and the stock price at the exercise date. This plan is considered a cash settled share based payment and is as such recorded as a liability (see Note 16).

The SARs have a contractual term of ten y

ars and vest for 25% in the fourth year; 25% in the fifth year; 25% in the sixth year and 25% in the seventh year. SARs are exercisable as from the month after they have vested and in the subsequent exercise periods.

The fair value of the SAR is estimated at each reporting date using the Black-Scholes option pricing model, taking into account the terms and conditions upon which the warrants were granted.

F-5

Table of Contents

The following table lists the input used for the Black-Scholes model:


	2021			2020			2019
Return dividend		0	%		0	%		0	%
Expected volatility		80	%		84	%		49	%
Risk-free interest rate		0.18	%		-0.34	%		0.10	%
Expected life		0.25			0.25			0.25
Exercise price (in €)		8.81			8.81			8.81
Stock price (in €)		21.05			44.20			16.32
Fair value SAR (in €)		12.26			35.38			7.52

The expense arising from share-based payment transactions for the SARs plan was K€(874) in 2021 (2020: K€1,242; 2019:

K€ -11).

The carrying value of the liability at December 31, 2021 amounts to K€147 (2020: K€1,223; 2019: K€574). The total intrinsic value of the liability for warrants currently exercisable at December 31, 2021 amounts K€147 (2020: K€447; 2019: K€120).

Share-based payment plans of RapidFit+

The subsidiary RapidFit+ has issued a warrant plan on August 23, 2013 where a maximum of 300 warrants can be offered to management with an exercise price of €553.90. In January 2014, a total of 199 warrants were granted and accepted.

The changes for the year for the RapidFit+ warrant plan are as follows:


	2021		2020		2019
Outstanding at January 1		186		186		199
Granted		0		0		0
Forfeited / Cancelled		0		0		(13	)
Exercised		0		0		0
Outstanding at December 31		186		186		186
Exercisable at December 31		186		186		184

The following table lists the input to the Black-Scholes model for the RapidFit+ warrant plan:


	2014
Return dividend		0	%
Expected volatility		50	%
Risk-free interest rate		2.29	%
Expected life		5.5
Exercise price		553.9
Fair value option		262.7

The expense arising from share-based payment transactions for RapidFit+ warrant plan was K€2 in 2021 (2020: K€2; 2019: K€2

)

F-5

Table of Contents

15 Loans and borrowings

The loans and borrowings include the following:


	As of December 31
in 000€	2021		2020		2019
K€35,000 EIB bank loan		33,333		35,000		35,000
K€28,000 acquisition bank loan		15,604		18,621		21,612
K€18,000 secured bank loans		16,592		17,013		17,429
K€12,300 bank loans ACTech		8,160		10,470		11,850
K€9,050 other facility loans		2,248		2,910		3,599
Bank investment loans—top 20 outstanding		12,852		17,280		22,132
Bank investment loans—other		1,569		2,681		4,429
Lease liabilities		8,621		10,624		9,876
Institutional loan		0		353		824
Convertible bonds		0		0		1,000
Related party loan		128		158		187
Total loans and borrowings		99,107		115,110		127,938
Current		21,202		17,523		16,838
Non-Current		77,905		97,588		111,100

K€35,000 EIB bank loan

On December 20, 2017 the Group entered into a finance contract with the European Investment Bank, or EIB, to finance future research and development programs. As part of a first tranche, an amount of K€10,000 was drawn in the course of 2018. The agreement foresees a first

two-year

period without loan reimbursements. Loans under the contract are made at a fixed rate, based on the Euribor rate at the time of the borrowing, plus a variable margin. The interest rate for this loan is 2.40%. The contract contains customary security, covenants and undertakings. A second tranche of K€25,000 was drawn in the course of 2019 with an interest rate of 2.72%. A pledges have been given on moveable assets as well as a pledge over the shares.

On June 29, 2020, the European Investment Bank temporarily waived the compliance obligation of the covenants “Total gross Debt to Adjusted EBITDA” (until December 31, 2022), and “Adjusted EBITDA to Net financial charges” (until 31 December 2020) under the condition that the covenant “Total net debt to Adjusted EBITDA” will be met for the period. In addition, the European Investment Bank agreed not to recalculate the interest rate until January 3, 2022 for the first tranche and until January 17, 2022 for the second tranche. Finally, the European Investment Bank waived “the subsidiary financial indebtedness” covenant for the calculation period ending on June 30, 2020. For the periods thereafter this covenant has been eased. These covenants were waived in order to allow the Group to continue investing in its growth programs, even under

stressed COVID-19 scenarios. At December 31, 2021, The Group was in compliance with all debt covenants including those that have been waived, as a result of the additional capital raised during 2021, the solid Adjusted EBITDA, and the decrease of our gross debt position.

During 2021 a first reimbursement of K€1,666 was made.

K€28,000 Acquisition loan

This bank loan has been concluded in October 2017 to finance the acquisition of ACTech. The loan includes a portion of K€18,000 reimbursable monthly during seven years, and a bullet portion of K€10,000, reimbursable at once in October 2024. The interest rate is fixed for the duration of the loan, and amounts to 1.1% on average for both portions. The bank loans are secured with a business pledge mandate, a share pledge on Materialise Germany GMBH, and debt covenants.

K€18,000 secured bank loans

The K€18,000 loan has been concluded in 2016 in two agreements to finance the construction of new facilities in Leuven (Belgium) and in Poland, both maturing in 2032. The agreement for the Belgian facility financing amounts to K€12,000; and with reimbursements only starting in December 2022. The agreement for the Polish facility financing amounts to K€6,000, and reimbursements have started in June 2019. The average interest rate of both agreements amounts to 1.2%. The bank loan is secured with a mortgage mandate on the Belgian facility buildings.

F-5

Table of Contents

K€12,300 bank loans

In March 2018, three bank loans originating from the acquired ACTech Group were refinanced entirely for the amount of K€9,300, with adjusted maturity to May 2025 and first reimbursements in August 2020. The interest rate has been fixed at approximately 1.6%, and pledges including a K€4,650 mortgage on ACTech’s facilities and a guarantee of Materialise NV. In addition, a new investment credit of K€3,000 was obtained in June 2018, repayable as from January 2019 and with a fixed interest rate of 1.5%.

K€9,050 - Other facility loans

Three facility loans were contracted in 2005, 2006 and 2012 for the construction of Leuven office and production facilities (K€2,000, K€300 and K€5,000, respectively) and another loan for the Czech Republic offices in 2008 (K€1,750). The balance of the four loans amounts to K€2,248 per December 31, 2021. All loans have a repayment schedule of 15 years and interest rates are fixed between 4.3% and 5.4% for the four loans.

Miscellaneous investment loans

The 20 largest of these loans outstanding as at December 31, 2021 amount to a balance of K€12,852. They have been agreed in 2020 and in the years before to finance various investments in machinery, printers, equipment, and software tools. The vast majority of the loans have a reimbursement period over seven years, and are at fixed interest rates with weighted average below 1%.

K€8,621 Lease liabilities included lease with related party

The Group has several lease obligations mainly with financial institutions and related to the financing of buildings and various other items of plant and equipment such as 3D printers. As at December 31, 2021 the balance of these lease agreements amounts to K€8,621, and are mostly at fixed interest rates with weighted average below 2%.

The total cash outflow from the lease liabilities amounts to K€3,775 in 2021, K€3,640 in 2020 and K€5,283 in 2019.

K€2,000 institutional loan

This loan was contracted with a governmental institution in Germany to finance the production operations of Materialise Germany for a maximum amount of K€2,000. The loan is repayable over a four year period, starting as of September 2017 with a fixed interest rate of 0.25% payable per quarter. As at December 31, 2021 0 balance remains outstanding under this loan.

K€1,000 convertible bond with related party

On October 9, 2020, 1,000 convertible bonds with a related party for a total amount of K€1,000 were converted to 509,904 shares.

Related party loan

Lunebeke NV, a related party of the Group as discussed in Note 26, has granted the Group a loan of K€400 at fixed interest rate of 4.23% that matures in 2025. The purpose of the loan is to finance the purchase of a building in France. The amount outstanding as of December 31, 2021 is K€128 (2020: K€158; 2019: K€187). The interest expense for the year ended December 31, 2021 is K€5 (2020:K€7; 2019:K€9

Changes of liabilities for financing activities:

The following table presents the changes of the liabilities for financing activities:


	For the year ended December 31
in 000€	2021			2020			2019
At January 1,		115,110			127,938			106,038
Proceeds from loans & borrowings		0			0			29,000
Repayment of loans & borrowings		(14,277	)		(13,736	)		(12,126	)
New leases		2,355			4,626			8,326
Repayment of leases		(3,775	)		(3,640	)		(5,283	)
Loans acquired from business combination		0			0			2,076
Net foreign exchange movements		(306	)		(78	)		(92	)
At December 31,		99,107			115,110			127,938

F-5

Table of Contents

16	Other non-current liabilities

The other

non-current

liabilities consist of the following:


	As of December 31,
in 000€	2021		2020		2019
Advances received on contracts		1,500		0		0
Provisions		667		318		122
Other		0		80		574
Total		2,167		398		696

The increase of the provision relates to a provision for the

potential

of reclassification of our self-employed workers into employees within Engimplan (K€

541).

The advances received on contracts were paid by a client in the context of a long term contract for medical devices.

The impact of the accounting treatment of the Belgian contribution plans with a minimal guarantee is not material as the number of beneficiaries is limited. No provisions have been recognized as of December 31, 2021, 2020 and 2019. As such, no further disclosures have been provided.

17	Tax payables

The tax payables amount to K€783 as per December 31, 2021 (2020:K€974; 2019:K€3,363).

F-5

Table of Contents

18	Deferred income

Deferred income consists of the following:


	As of December 31
in 000€	2021		2020		2019
Deferred maintenance & license		34,287		30,242		27,667
Deferred (project) fees		3,537		4,555		4,647
Deferred government grants		435		85		358
Total		38,259		34,882		32,672
current		33,307		29,554		27,641
non-current		4,952		5,328		5,031

The deferred maintenance and license revenue consists of maintenance and license fees paid

up-front

which are deferred and recognized in earnings over either the maintenance period or the duration of the license. The deferred (project) fees consist of

one-time

and advance payments received which are deferred in accordance with the revenue accounting policies. The deferred government grants are recognized as income under “other operating income”.

We refer to Note 22.1.2 for more detail on the contract liabilities.

F-5

Table of Contents

19	Other current liabilities

Other current liabilities include the following:


	As of December 31
in 000€	2021		2020		2019
Payroll-related liabilities		11,836		11,152		10,281
Non-income tax payables		2,058		3,018		2,262
Accrued charges		1,170		995		1,080
Advances received		276		404		715
RapidFit+ amounts payable to former shareholders		0		875		875
Derivatives		118		140		478
Cash settled share-based payment plan		147		1,223		0
Other current liabilities		367		888		1,995
Total		15,972		18,695		17,686

The

non-income

tax payables mainly relate to VAT payables and payroll taxes.

F-5

Table of Contents

20	Fair value

Financial assets

The carrying value and fair value of the financial assets as of December 31, 2021, 2020 and 2019 are as follows:


	Carrying value						Fair value
in 000€	2021		2020		2019		2021		2020		2019
Financial assets
Financial assets measured at amortized cost
Trade receivables (current)		41,541		30,871		40,977		41,541		30,871		40,977
Other financial assets (non-current)		2,696		712		580		2,696		712		580
Other current non-trade receivables		1,696		1,618		1,676		1,696		1,618		1,676
Cash & cash equivalents		196,028		111,538		128,897		196,028		111,538		128,897
Total financial assets measured at amortised cost		241,961		144,739		172,130		241,961		144,739		172,130
Financial assets at fair value through profit or loss
Derivatives		1,770		23		9
Convertible loan		3,560		6,203		2,750
Total financial assets measured at fair value through profit and loss		5,330		6,226		2,759
Financial assets at fair value through OCI
Non-listed equity investments		399		3,842		3,046
Total financial assets at fair value through OCI		399		3,842		3,046

The fair value of the financial assets has been determined on the basis of the following methods and assumptions:

•

The carrying value of the cash and cash equivalents and the current receivables approximate their fair value due to their short term character;

•

The fair value of the derivatives has been determined based on a

mark-to-market

analysis prepared by the bank based on observable market inputs (level 2 inputs);

•

Other current

non-trade

receivables are being evaluated on the basis of their credit risk and interest rate. Their fair value is not different from their carrying value on December 31, 2021, 2020 and 2019

•

Other non-current

financial

assets are being evaluated on the basis of their credit risk and interest rate which are considered as level 2 inputs. Their fair value is not considered different from their carrying value given the related interest rate is revised on a regular basis.

•

The

non-listed

equity investments, mainly representing the investment AM Flow (via an investment in AM Danube, one of the shareholders of AM Flow) for K€307, are measured at fair value. As of December 31, 2021, management considers that currently the cost is an appropriate estimate of fair value (level 2 input) because a recent capital increase indicated that the market valuation of AM Flow has not changed and because of the followings reasons:

•

AM Flow is a

non-listed

entity;

•

The Group only has an insignificant interest in AM Flow BV (approx. 5% of the shares indirectly);

•

The Group has no representatives in the Board of Directors of AM Flow BV; and

•

Insufficient more recent information is available to measure fair value;

•

For the

non-listed

equity investment in Essentium, as of December 31, 2021, Materialise recorded a remeasurement of fair value to zero through OCI (K€3,443).

•

The derivatives include the option acquistion for Link3D for $ 2 million, discussed further in Note 4. The fair value is not different from the carrying value on December 31, 2021, and was determined based on level 3 inputs.

•

The convertible loan granted to Fluidda was measured at fair value. As of December 31, 2021, management determined the fair value based upon level 3 inputs as follows:

•

The Group determined that the fair value of the convertible loan as at December 31, 2021 amounted to K€3,560. Fluidda is a private

start-up

In assessing the fair value, the Group has made significant estimates with regard to the discount rate, the probability of each repayment and conversion scenario and related timing, the amount of the qualified capital increase. Changes in the significant assumptions may lead to a significant increase/decrease in the fair value of the convertible loan. A increase/decrease in the applied discount rate for Fluidda by 1% would lead to a change in fair value by K€(46) / K€48.

F-

Table of Contents

Financial liabilities:

The carrying value and fair value of the financial liabilities as of December 31, 2021, 2020 and 2019 can be presented as follows:


	Carrying value						Fair value
in 000€	2021		2020		2019		2021		2020		2019
Financial liabilities measured at amortized cost
Loans & Borrowings including lease liabilities		99,108		115,110		127,939		100,417		116,843		128,930
Trade payables		20,171		17,698		18,517		20,171		17,698		18,517
Other liabilities excl. written put option on NCI		485		1,276		3,187		485		1,275		3,187
Total financial liabilities measured at amortized cost		119,764		134,084		149,643		121,073		135,816		150,634
Financial liabilities measured at fair value
Contingent consideration		—		—		—		—		—		—
Cash settled share based payments		147		1,223		—
Written put option on NCI		0		875		875
Derivatives		118		140		478
Total financial liabilities measured at fair value		265		2,238		1,353
Total non-current		79,905		98,543		112,549
Total current		40,124		37,779		38,447

The fair value of the financial liabilities has been determined on the basis of the following methods and assumptions:

•

The carrying value of current liabilities approximates their fair value due to the short term character of these instruments;

•

Loans and borrowings are evaluated based on their interest rates and maturity date. Most interest bearing debts have fixed interest rates and their fair value is subject to changes in interest rates and individual creditworthiness. Their carrying value approximates their fair value;

•

The fair value of the derivatives has been determined based on a

mark-to-market

analysis prepared by the bank based on observable market inputs (level 2 inputs);

•

The fair value of the written put option on

non-controlling

interest has been determined based on the present value of the redemption amount (level 3 inputs);

•

The fair value of the cash-settled share based payments has been determined based on a Black-Scholes model using inputs that are level 1 (stock-price and risk-free interest rate) as well as level 2 (e.g. volatility). We refer to Note 14.

Fair value hierarchy 3 evolution


Convertible Loans Ditto & Fluidda	Fair Value Evolution
in 000€	2021			2020		2019
As at 1 January		6,203			2,750		—
Addition		—			2,830		2,500
Remeasurement		—			316		—
Capitalized interests		—			307		250
Reimbursement Ditto convertible loan		(2,643	)		—		—
As at 31 December		3,560			6,203		2,750

Fair value hierarchy


Written Put Option on NCI RapdFit+	Fair Value Evolution
in 000€	2021			2020		2019
As at 1 January		875			875		845
Remeasurement		—			—		30
Payout put-option PMV		(875	)		—		—
As at 31 December		—			875		875

F-6

Table of Contents

The Group uses the following hierarchy for determining and disclosing the fair value of financial instruments by valuation technique:

•

Level 1: quoted (unadjusted) prices in active markets for identical assets and liabilities;

•

Level 2: other techniques for which all inputs which have a significant effect on the recorded fair value are observable, either directly or indirectly; and

•

Level 3: techniques which use inputs that have a significant effect on the recorded fair value that are not based on observable market data.

The Group has the following financial instruments carried at fair value in the statement of financial position on December 31, 2021, 2020 and 2019: the derivatives related to interest rate and foreign currency swaps as included in the above tables, a call option and written put option on

non-controlling

interest and the

non-listed

equity investments.

F-6

Table of Contents

21	Segment information

For management purposes, the Group is organized into segments based on their products, services and industry and has the following three reportable segments:

•

The Materialise Medical segment, which develops and delivers medical software solutions, medical devices and other related products and services;

•

The Materialise Manufacturing segment, which delivers 3D printed products and related services; and

•

The Materialise Software segment, which develops and delivers additive manufacturing software solutions and related services.

The measurement principles used by the Group in preparing this segment reporting are also the basis for segment performance assessment and are in conformity with IFRS. The Chief Executive Officer of the Group acts as the chief operating decision maker. As a performance indicator, the chief operating decision maker controls the performance by the Group’s revenue and adjusted EBITDA.

The following table summarizes the segment reporting for each of the reportable periods ending December 31. Corporate research and development, headquarters’ function, financing and income taxes are managed on a Group basis and are not allocated to operating segments. As management’s controlling instrument is mainly revenue-based, the reporting information does not include assets and liabilities by segment and is as such not available per segment.


in 000€	Materialise Software			Materialise Medical			Materialise Manufacturing			Total segments			Unallocated			Consolidated
For the year ended December 31, 2021
Revenues		42,902			73,368			89,180			205,450			—			205,450
Segment Adjusted EBITDA		15,705			20,669			6,275			42,649			(10,159	)		32,490
Segment Adjusted EBITDA %		36.6	%		28.2	%		7.0	%		20.8	%		—			15.8	%
For the year ended December 31, 2020
Revenues		39,054			61,729			69,635			170,418			31			170,449
Segment Adjusted EBITDA		13,383			13,915			2,548			29,846			(9,468	)		20,378
Segment Adjusted EBITDA %		34.3	%		22.5	%		3.7	%		17.5	%		—			12.0	%
For the year ended December 31, 2019
Revenues		41,654			60,808			94,156			196,618			61			196,679
Segment Adjusted EBITDA		13,812			10,774			12,154			36,740			(10,084	)		26,656
Segment Adjusted EBITDA %		33.2	%		17.7	%		12.9	%		18.7	%		—			13.6	%

The segment Adjusted EBITDA is reconciled with the consolidated net profit (loss) for the year as follows:


	For the year ended December 31,
in 000€	2021			2020*			2019
Segment Adjusted EBITDA		42,649			29,847			36,740
Depreciation, amortization and impairment		(20,516	)		(19,775	)		(19,278	)
Corporate research and development		(2,948	)		(2,824	)		(1,859	)
Corporate headquarter costs		(10,317	)		(11,719	)		(11,077	)
Other operating income (expense)		3,527			3,668			2,410
Fair value adjustment 50% Materialise Motion		—			770			—
Impairments		(177	)		(4,606	)		—
Operating (loss)/ profit		12,217			(4,639	)		6,936
Financial expenses		(4,101	)		(5,995	)		(3,682	)
Financial income		5,620			2,452			1,377
Income taxes		(591	)		1,028			(2,595	)
Share in loss of joint venture		—			(39	)		(392	)
Net profit (loss) for the year		13,145			(7,193	)		1,644

*	The year 2020 has been retrospectively adjusted to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

F-6

Table of Contents

The Group has 1 individual customer that represents sales larger than 10% of the total revenue in 2021 (2020: 0; 2019: 0).

The total amount of revenues from this customer for the year 2021 was K€ 26,772, and these revenues are reported within the Medical segment.

Entity-wide disclosures

The revenue by geographical area is as follows:


	As of December 31,
in 000€	2021		2020		2019
United States of America		69,140		47,266		56,235
Americas other than USA		6,297		5,297		3,395
Belgium		6,947		7,048		7,917
Germany		20,442		17,087		31,185
France		12,964		11,586		20,110
Switzerland		13,643		12,587		14,907
United Kingdom		8,836		7,725		13,804
Italy		6,520		5,876		6,707
Netherlands		7,310		6,943		5,825
Other Europe		33,816		31,518		17,329
Asia Pacific		19,535		17,516		19,265
Total		205,450		170,449		196,679

The total revenue realized in the country of domicile (Belgium) in 2021 amounts to K€6,947 (2020: K€7,048; 2019: K€7,917).

The total

non-current

assets, other than financial instruments, deferred tax assets, by geographical area are as follows:


	As of December 31,
in 000€	2021		2020		2019
United States of America (USA)		4,237		3,441		4,194
Americas other than USA		3,276		3,454		8,374
Belgium		67,865		62,810		49,426
Germany		55,712		58,305		57,918
Poland		12,756		13,437		15,506
Rest of Europe		10,019		9,087		10,410
Asia-Pacific		1,739		2,052		2,658
Total		155,604		152,586		148,486

The totals of the above table include goodwill, intangible assets and property, plant & equipment and

Right-of-Use

Assets as disclosed in the consolidated statements of financial position.

F-6

Table of Contents

22	Income and expenses

22.1 Revenue

22.1.1 Disaggregated revenue information


	For the year ended December 31, 2021
in 000€	Materialise Software		Materialise Medical		Materialise Manufacturing		Total segments		Unallocated		Consolidated
Geographical markets
United States of America (USA)		11,981		38,507		18,652		69,140		—		69,140
Americas other than USA		501		4,576		1,220		6,297		—		6,297
Europe (without Belgium) & Africa		18,749		22,098		62,683		103,530		—		103,530
Belgium		235		1,177		5,535		6,947		—		6,947
Asia Pacific		11,436		7,010		1,090		19,536		—		19,536
Total revenue from contracts with customers		42,902		73,368		89,180		205,450		—		205,450
Type of goods or service
Software revenue (non-medical)		42,902		—		—		42,902		—		42,902
Software revenue (medical)		—		22,856		—		22,856		—		22,856
Medical devices and services		—		50,512		—		50,512		—		50,512
Manufacturing		—		—		89,180		89,180		—		89,180
Other		0		—		—		—		—		—
Total revenue from contracts with customers		42,902		73,368		89,180		205,450		—		205,450
Timing of revenue recognition
Goods/Services transferred at a point in time		19,832		54,355		85,448		159,635		—		159,635
Goods/Services transferred over time		23,070		19,013		3,732		45,815		—		45,815
Total revenue from contracts with customers		42,902		73,368		89,180		205,450		—		205,450


	For the year ended December 31, 2020
in 000€	Materialise Software		Materialise Medical		Materialise Manufacturing		Total segments		Unallocated		Consolidated
Geographical markets
United States of America (USA)		11,939		28,173		7,153		47,265		—		47,265
Americas other than USA		533		4,504		260		5,297		—		5,297
Europe (without Belgium) & Africa		15,702		20,781		56,840		93,323		—		93,323
Belgium		112		2,335		4,570		7,017		31		7,048
Asia Pacific		10,768		5,936		812		17,516		—		17,516
Total revenue from contracts with customers		39,054		61,729		69,635		170,418		31		170,449
Type of goods or service
Software revenue (non-medical)		39,054		—		—		39,054		—		39,054
Software revenue (medical)		—		19,808		—		19,808		—		19,808
Medical devices and services		—		41,921		—		41,921		—		41,921
Manufacturing		—		—		69,635		69,635		—		69,635
Other		0		—		—		—		—		—
Total revenue from contracts with customers		39,054		61,729		69,635		170,418		31		170,449
Timing of revenue recognition
Goods/Services transferred at a point in time		15,536		46,286		66,824		128,646		31		128,677
Goods/Services transferred over time		23,518		15,443		2,811		41,772		—		41,772
Total revenue from contracts with customers		39,054		61,729		69,635		170,418		31		170,449

F-6

Table of Contents

The revenue per type of good or service including the previous years is as follows:


	For the year ended December 31
in 000€	2021		2020		2019
Software revenue (non-medical)		42,902		39,054		41,654
Software revenue (medical)		22,887		19,808		19,407
Medical devices and services		50,481		41,921		41,401
Manufacturing		89,180		69,635		94,156
Other		0		31		61
Total		205,450		170,449		196,679

22.1.2 Contract balances

The following table provides information about receivables, contracts in progress (contract assets) and deferred income (contract liabilities) from contracts with customers.


	As of December 31,
in 000€	2021		2020
Trade receivables, included in ‘trade and other receivables’		42,814		32,346
Contract assets / contracts in progress		495		749
Contract liabilities / deferred income /advances receive d on contracts		39,324		34,797

We refer to Note 18 for a detail of the deferred income. Note 18 includes a split of the deferred income in current and

non-current.

Non-current

deferred income, representing mainly maintenance contracts with terms more than one year and certain contracts with

up-front

fees which are allocated to performance obligations that will be satisfied over more than one year, may be recognized as revenue between one to three years. Total revenue recognized during 2021 that was included in the contract liability at the beginning of the year amounts to K€34,797. There is no revenue recognized during 2021 from performance obligations that were satisfied in the previous years.

The relation between the timing of satisfaction of the performance obligations and the timing of billing resulting in contract assets and liabilities is as follows:

•

Maintenance services: maintenance services are typically billed at the beginning of the maintenance period resulting in deferred income that is recognized on a straightline basis over the maintenance period.

•

Software licenses: certain software licenses may have been billed prior to the delivery of the software key or time-based software licenses may have been billed

up-front

resulting in a deferred income balance.

•

Certain agreements in the medical segment include

up-front

fees such as

step-in

fees or milestone payments which are billed at inception of the contract but which are allocated to performance obligations which are satisfied at a later time in the contract term or which have not been recognized considering the revenue constraint (i.e. may have to be credited when customer achieves certain volume targets). In addition, certain contracts include prepaid fees for volume “Plan Only” purchases for which the purchased services are only delivered during a one year period. Those fees result in deferred income which are recognized as revenue when services/products are delivered and revenue is not constrainted.

•

Certain development services are satisfied while the services can only billed at certain

pre-defined

points in time or when the services are fully satisfied resulting in contracts in progress / contract assets.

22.2 Cost of sales

Cost of sales includ

s the following selected information:


	For the year ended December 31
in 000€	2021			2020			2019
Purchase of goods and services		(38,691	)		(31,725	)		(37,870	)
Amortization and depreciation		(11,296	)		(11,788	)		(10,917	)
Payroll expenses		(38,499	)		(32,438	)		(37,715	)
Work in Progress		1,208			(495	)		(550	)
Total		(87,278	)		(76,446	)		(87,052	)

F-6

Table of Contents

22.3 Research and development expenses

Research and development expenses include the following selected information:


	For the year ended December 31
in 000€	2021			2020			2019
Purchase of goods and services		(3,770	)		(2,788	)		(2,583	)
Amortization and depreciation		(1,821	)		(1,746	)		(1,483	)
Payroll expenses		(21,300	)		(20,368	)		(19,219	)
Other		—			(2,202	)		(63	)
Total		(26,891	)		(27,104	)		(23,348	)

22.4 Sales and marketing expenses

Sales and marketing expenses include the following selected information:


	For the year ended December 31
in 000€	2021			2020			2019
Purchase of goods and services		(6,704	)		(5,960	)		(9,228	)
Amortization and depreciation		(1,892	)		(1,946	)		(1,346	)
Payroll expenses		(40,555	)		(36,521	)		(42,055	)
Other		—			(209	)		(360	)
Total		(49,151	)		(44,636	)		(52,989	)

22.5 General and administrative expenses

General and administrative expenses include the following selected information:


	For the year ended December 31
in 000€	2021			2020			2019
Purchase of goods and services		(11,248	)		(8,933	)		(9,856	)
Amortization and depreciation		(2,987	)		(2,437	)		(3,630	)
Payroll expenses		(19,080	)		(18,104	)		(18,078	)
Other		—			137			(222	)
Total		(33,315	)		(29,337	)		(31,786	)

F-6

Table of Contents

22.6 Net other operating income

The net other operating income can be detailed as follows:


	For the year ended December 31
in 000€	2021			2020*			2019
Government grants		4,466			4,473			5,263
Amortization intangibles purchase price allocation		(2,521	)		(1,857	)		(2,013	)
Allowance for doubtful debtors		(58	)		(244	)		210
Capitalized expenses (asset construction)		223			316			166
Tax Credits		746			1,198			665
Personnel related income		—			—			37
Fair value adjustment Materialise Motion		—			770			—
Impairment Engimplan		—			(2,516	)		—
Impairment Metal Belgium (Aldema)		(177	)		—			—
Other		723			295			1,104
Total		3,402			2,436			5,432

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion.

The Company has received government grants from the Belgian federal and regional governments and from the European Community in the forms of grants linked to certain of its research and development programs and reduced payroll taxes.

22.7 Payroll expenses

The following table shows the breakdown of payroll expenses for 2021, 2020 and 2019:


	For the year ended December 31
in 000€	2021			2020			2019
Short-term employee benefits		(93,850	)		(82,135	)		(87,775	)
Social security expenses		(17,076	)		(15,691	)		(15,647	)
Expenses defined contribution plans		(1,250	)		(1,150	)		(1,033	)
Other employee expenses		(7,259	)		(8,455	)		(12,612	)
Total		(119,435	)		(107,431	)		(117,067	)
Total registered employees at the end of the period		2,332			2,162			2,177

22.8 Financial expenses

Financial expenses includes the following selected information:


	For the year ended December 31
in 000€	2021			2020			2019
Interest expense		(2,435	)		(2,299	)		(2,146	)
Foreign exchange losses		(1,258	)		(2,999	)		(832	)
Other financial expenses		(408	)		(697	)		(704	)
Total		(4,101	)		(5,995	)		(3,682	)

22.9 Financial income

Financial income includes the following selected information:


	For the year ended December 31
in 000€	2021		2020		2019
interest income		658		418		386
Foreign exchange gains		4,904		1,668		955
Other finance income		58		366		36
Total		5,620		2,452		1,377

F-6

Table of Contents

22.10 Income taxes and deferred taxes

Current income tax

The following table shows the breakdown of the tax expense for 2021, 2020 and 2019:


	As of December 31,
in 000€	2021			2020*		2019
Current income tax		(1,252	)		4		(2,926	)
Deferred income taxes *		661			1,024		331
Total income taxes for the period		(591	)		1,028		(2,595	)

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The current tax expense is equal to the amount of income tax owed to the tax authorities for the year, under the applicable tax laws and rates in effect in the various countries.

Deferred tax

Deferred tax is presented in the statement of financial position und

non-current

assets and

non-current

liabilities, as applicable. The following table shows the breakdown of the deferred tax assets, deferred tax liabilities and the deferred tax expense for 2021, 2020 and 2019:


	Asset/(liability)									Income/(expense)
in 000€	2021			2020*			2019			2021			2020*			2019
Tax losses, notional interest deduction and other tax credits		2,162			1,823			0			0			0			0
Amortization development assets and other intangible assets		136			75			38			0			0			0
Depreciation property, plant & equipment		55			125			70			0			0			0
Leases		35			—			—			—			—			—
Other items		274			77			84			0			0			0
Total deferred tax assets		2,662			2,100			192			26			9			(124	)
Property, plant & equipment		(850	)		(209	)		(403	)		0			0			0
Intangible assets		(5,757	)		(6,414	)		(4,937	)		0			0			0
Investment grants		(199	)		(227	)		(301	)		0			0			0
Inventory valuation		0			(31	)		(89	)		0			0			0
Other items		—			—			(17	)		0			0			0
Total deferred tax liabilities		(6,806	)		(6,881	)		(5,747	)		(687	)		(1,033	)		455
Netting		2,435			1,899			—			—			—			—
Total deferred tax assets, net		227			201			192			0			0			0
Total deferred tax liabilities , net		(4,371	)		(4,982	)		(5,747	)		—			—			—
Total deferred tax income (expense)		0			0			0			(661	)		(1,024	)		331

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The Group has unused tax losses and

unused Innovation Income Deduction

in an amount of K€48,648 for 2021 (2020: K€43,172;

2019

: K€32,615) of which K€35,578 for 2021 (2020: K€27,878; 2019: K€21,878) relating to Materialise NV.

F-6

Table of Contents

With respect to the unused tax losses of Materialise NV, no deferred tax assets have been recognized given that in view of the Belgian Patent Income Deduction and Innovation Income Deduction there is an uncertainty to which extent these tax losses

and unused Innovation Income Deduction

will be used in future years. As from July 1, 2016, the Innovation Income Deduction replaced the former Patent Income Deduction. Under the grandfathering rule the Patent Income Deduction system could still be applied until June 30, 2021. The Belgian Patent Income Deduction allows companies to deduct 80% of the qualifying gross patent income from the taxable basis. Under the Innovation Income Deduction system, companies can deduct up to 85% of their net innovation income from the taxable basis. Based on its analysis, in 2021 the Group determined that no deferred tax assets should be recognized in respect of the tax losses or the unused Innovation Income Deduction carried forward at the level of Materialise NV at December 31, 2021.

With respect to the unused tax losses of the other entities, 0deferred tax assets have been recognized in 2021, 2020 nor 2019 except for our tax unity in Germany where we recorded a deferred tax asset of € 0.3 million related to 2020 losses and Materialise Motion where we recorded a deferred tax asset of €

1.8

million against a deferred tax liability of €

2.0

million. The deferred tax liability of

K€6,806

as at December 31, 2021 mainly relates to the intangibles that have been recognized in connection with business combinations (ACTech and Materialise Motion).

Relationship between Tax Expense and Accounting Profit


	For the year ended December 31
in 000€	2021			2020*			2019
Profit (loss) before taxes		13,736			(8,221	)		4,239
Income tax at statutory rate of 25% (2019: 29.58%)		(3,432	)		2,045			(1,254	)
Effect of different local tax rate		12			529			63
Tax adjustments to the previous period		88			(231	)		(367	)
Non-deductible expenses		(354	)		(584	)		(554	)
Research and development tax credits		398			375			179
Patent income deduction / innovation income deduction		2,847			0			0
Non recognition of deferred tax asset		(407	)		(723	)		(1,579	)
Recognition of deferred tax assets on previous year’s tax losses		0			0			119
Non-taxable income		350			503			925
Use of previous year’s tax losses and tax credits for which no deferred tax assets was recognized		163			135			0
Taxes on other basis		(71	)		(993	)		0
Other		(185	)		(28	)		(127	)
Income tax benefit (expense) as reported in the consolidated income statement		(591	)		1,028			(2,595	)

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

F-

Table of Contents

23 Earnings per share

Basic earnings per share amounts are calculated by dividing the net profit (loss) for the year attributable to ordinary equity holders of the parent company by the weighted average number of ordinary shares outstanding during the year.

Diluted earnings per share amounts are calculated by dividing the net profit (loss) attributable to ordinary equity holder of the parent company by the weighted average number of ordinary shares outstanding during the year plus the weighted average number of ordinary shares that would be issued on conversion of all warrants and the weighted average number of ordinary shares that would be issued on conversion of the convertible debt. If there is a net loss after taxes, the number of diluted shares is equal to the basic shares.

The net profit (loss) for the year used for the basic and diluted earnings per share are reconciled as follows:


	For the year ended December 31
in 000€	2021		2020*			2019
Net profit (loss) attributable to ordinary equity holders of the parent for basic earnings		13,154		(7,044	)		1,586
Interest on convertible bonds		—		—			50
Net profit (loss) attributable to ordinary equity holders of the parent adjusted for the effect of dilution		13,154		(7,044	)		1,636

*	The year 2020 has been adjusted retrospectively to reflect the final accounting of the business combination with Materialise Motion. See additional information in Notes 2 and 4.

The warrants are dilutive at December 31, 2021. The convertible bond has been converted in shares as per October 9, 2020. We refer to Note 13. The convertible bonds and the warrants are dilutive as per December 31, 2021 and 2019 and are anti-dilutive as per December 31, 2020.

The following reflects the share data used in the basic and diluted earnings per share computations:


	For the year ended December 31
in 000	2021		2020		2019
Weighted average number of ordinary shares for basic earnings per share		56,685		53,364		52,915
Effect of dilution:
Warrants		158		—		563
Convertible loan		—		—		509
Weighted average number of ordinary shares adjusted for effect of dilution		56,843		53,364		53,987

The earnings per share are as follows:

				��
	For the year ended December 31
	2021		2020			2019
Earnings per share attributable to the owners of the parent
Basic		0.23		(0.13	)		0.03
Diluted		0.23		(0.13	)		0.03

F-7

Table of Contents

24	Commitments and contingent liabilities

Mortgages and pledges

The Group has several loans secured by a mortgage on the building. The carrying value of related property, plant & equipment (including buildings under construction) is K€25,582 (2020: K€27,638; 2019: K€29,154). The total outstanding mortgages and pledges are K€103,685 in 2021 (2020: K€105,610; 2019: K€77,849).

Included in the above, the Group also has pledges on the business goodwill (“fonds de commerce”) of the Company for a total amount of K€69,300 in 2021 (2020: K€69,300; 2019: K€36,992) and pledges on other fixed assets for a total amount of K€1,399 (2020: K€3,290; 2019: K€3,301).

Other commitments

The Group has outstanding

non-cancellable

contracts with a future commitment of K€7,043 at December 31, 2021 (2020: K€6,384; 2019: K€11,640), mainly related to purchase commitment for raw materials. For property, plant & equipment, we have no committed expenditures as per December 31, 2021 (2020: K€0; 2019: K€0).

Contingent liabilities

. This judgment of the Brussels Court of Appeal is final and payment was made on November 25, 2021.

On November 15, 2021, we received a written notice from counsel for Zimmer Biomet, informing us of Zimmer Biomet’s decision to file a request for arbitration with the Belgian Centre for Arbitration and Mediation. Zimmer Biomet believes that we have a contractual obligation pursuant to the terms of our collaboration to indemnify Zimmer Biomet for the expenses it incurred as a result of its settlement with Conformis, Inc. of a patent dispute related to certain joint replacement devices. We believe there are meritorious defenses to Zimmer Biomet’s claim and intend to contest it vigorously. However, an adverse resolution of this arbitration could have an adverse effect on our results of operations, financial condition or cash flows in the period in which the arbitration is resolved. No amounts have been accrued for this loss contingency.

On June 1, 2021, we entered into a settlement agreement with Osteoplastics, LLC in connection with a patent infringement lawsuit filed by Osteoplastics, LLC on March 20, 2020, as described in our Annual Report on Form 20-F for the year ended December 31, 2020. Pursuant to the settlement agreement, we agreed to file documents seeking to withdraw or terminate all petitions for review (the “IPR Procedure”) of seven asserted patents owned by Osteoplastics, LLC with the Patent Trial and Appeal Board of the United States Patent and Trademark Office (the “PTAB”). On June 3, 2021, we filed a Motion to Dismiss with the PTAB regarding the IPR Procedure, and in a decision dated June 4, 2020, the PTAB granted our Motion to Dismiss. Other than external counsel fees and PTAB fees, there is no financial impact incurred in relation to this matter or the settlement agreement.

Apart from the cases set out above, the Group is currently not a party to any other legal or arbitration proceedings, which, in the opinion of the management, is likely to have or could reasonably possibly have a material adverse effect on the business, financial position or results of operations..

F-7

Table of Contents

Risks

The Group is mainly exposed to liquidity risk, interest rate risk and credit risk.

Foreign exchange risk

The Group transacts business globally and is subject to risks associated with fluctuating foreign exchange rates. The geographic areas outside of the Eurozone to which it sells its products and services are generally not considered to be highly inflationary. In the years ended December 31, 2021, 2020 and 2019, 35%, 35% and 29% of our revenue, respectively, were derived from sales in a currency different from the euro. Receivables denominated in a foreign currency are initially recorded at the exchange rate at the transaction date and subsequently

re-measured

in euro based on

period-end

exchange rates. Transaction gains and losses that arise from exchange rate fluctuations are charged to income.

The Group has primarily exposure to the USD, GBP, BRL, PLN and JPY as foreign currency. The exposure on MYR and CZK is limited. There is only a limited portion of turnover in local currency.

If the U.S. dollar (rate for €1) would have appreciated by 10%, the net result would have been € 1.2 million higher, excluding the effect of the cash and term accounts held in U.S. dollars. If the U.S. dollar (rate for €1) would have depreciated by 10%, the net result would have been € 1.0 million lower, excluding the effect of the cash and term accounts held in U.S. dollars.

To limit the exposure to foreign currency rate fluctuations on GBP and JPY, the Group has entered into currency rate swaps. As of December 31, 2021 the Group had hedge agreements in place for K GBP

1,350 and million JPY 160.0. We refer to note 20 for the related fair value of these derivatives.

F-7

Table of Contents

Liquidity risk

The liquidity risk is that the Group may not have sufficient cash to meet its payment obligations. This risk is countered by

day-by-day

liquidity management at the corporate level. The Group has historically entered into financing and lease agreements with financial institutions to finance significant projects and certain working capital requirements.

On December 20, 2017, the European Investment Bank (EIB) and Materialise entered into a finance contract to support Materialise’s ongoing research and development programs for growth from 2017 to 2020. The contract provides a credit of up to € 35.0 million drawable in two tranches. The first tranche could not exceed € 25.0 million and could be drawn during the first year of the contract. The Group actually has drawn € 10.0

million of this first tranche in the course of 2018. The second tranche of € 25.0 million was drawn in July 2019. The duration of the loan will be between six to eight years starting from the disbursement of the respective tranches, and includes a

two-year

loan reimbursement grace period. Loans under the contract are made at a fixed rate, based on the Euribor rate at the time of the borrowing, plus a variable margin. The interest rate for the first tranche is initially equal t

o 2.4% . The interest rate for the second tranche is initially 2.72% and varies in function of certain EBITDA levels and debt ratios. The contract contains customary security, covenants and undertakings.

The range of contracted obligations are as follows (incl. interest) :


in 000€	Less than 1 year		2 to 3 years		4-5 years		More than 5 years		Total
At December 31, 2021
Loans & borrowings		19,081		41,590		19,587		14,901		95,159
Lease liabilities		3,496		3,790		946		1,102		9,334
Trade payables		20,171		0		0		0		20,171
Other current liabilities		750		0		0		0		750
Total		43,498		45,380		20,533		16,003		125,414

	Less than 1 year		2 to 3 years		4-5 years		More than 5 years		Total
At December 31, 2020
Loans & borrowings		15,335		36,819		34,928		23,565		110,647
Lease liabilities		3,831		4,850		1,570		1,420		11,671
Trade payables		17,698		0		0		0		17,698
Other current liabilities		3,798		0		0		0		3,798
Total		40,662		41,669		36,498		24,985		143,814

	Less than 1 year		2 to 3 years		4-5 years		More than 5 years		Total
At December 31, 2019
Loans & borrowings		14,300		33,034		41,672		34,447		123,453
Lease liabilities		3,685		4,907		1,040		720		10,352
Trade payables		18,517		0		0		0		18,517
Other current liabilities		4,063		0		0		0		4,063
Total		40,565		37,941		42,712		35,167		156,385

Interest rate risk

Although the Group mainly has loans outstanding with a fixed interest rate, some of the loans have been contracted with variable interest rates. The most significant loans with variable interest rates have been secured by means of a variable to fixed interest rate swap. We therefore believe that the Group is not subject to immediate changes in interest rates.

Credit risk

Credit risk is the risk that third parties may not meet their contractual obligations resulting in a loss for the Group. The Group is exposed to credit risk from its operating activities (primarily trade receivables) and from its financing activities, which are mainly deposits with financial institutions. The Group limits this exposure by contracting with credit-worthy business partners or with financial institutions which meet high credit rating requirements. In addition, the portfolio of receivables is monitored on a continuous basis.

F-7

Table of Contents

Trade receivables and contracts in progress

Customer credit risk is managed by each business unit subject to the Group’s established policy, procedures and controls relating to customer credit risk management.

An impairment analysis is performed at each reporting date per company and using a provision matrix per company to measure expected credit losses. The provision rates are based on days past due for groupings of various customer segments with similar loss patterns (i.e., by legal entity).

The calculation reflects the probability-weighted outcome, the time value of money and reasonable and supportable information that is available at the reporting date about past events, current conditions and forecasts of future economic conditions. Generally, trade receivables are

written-off

if past due for more than one year and are not subject to enforcement activity. The maximum exposure to credit risk at the reporting date is the carrying value of each class of financial assets at amortized cost or fair value through OCI as disclosed in Note 20. The Group does not hold collateral as security.

The Group evaluates the concentration of risk with respect to trade receivables as low, as its customers are located in several jurisdictions and industries and operate in largely independent markets.

Set out below is the information about the credit risk exposure on the Group’s trade receivables using a provision matrix:


in 000€	Total		Non-due		Less than 30 days		31-60 days		61-90 days		91-180 days		More than 181 days
December 31, 2021		41,541		34,002		4,199		1,634		426		611		669
December 31, 2020		30,871		25,707		3,176		858		423		327		380
December 31, 2019		40,977		31,528		4,924		2,094		733		981		717

Capital management

The primary objective of the Group’s shareholders’ capital management strategy is to ensure it maintains healthy capital ratios to support its business and maximize shareholder value. Capital is defined as the Group shareholder’s equity.

The Group consistently reviews its capital structure and makes adjustments in light of changing economic conditions. The Group made no changes to its capital management objectives, policies or processes during the years ended December 31, 2021, 2020 and 2019.

F-7

Table of Contents

26	Related party transactions

The compensation of key management personnel of the Group is as follows:


	For the year ended December 31
in 000€	2021		2020		2019
Short-term employee benefits		2,832		2,302		2,394
Post-employment benefits		93		93		85
Total		2,925		2,395		2,479
Warrants granted		0		0		0
Warrants outstanding		4,545		108,905		359,266

The amounts disclosed in the table are the amounts recognized as an expense during the reporting period related to key management personnel (senior management and executive committee members). In the year ending December 31, 2021 the compensation to key management by means of share based payments amounts to K€132.

The following table provides the total amount of transactions that have been entered into with related parties for the relevant financial year:


in 000€	Sale of goods to		Purchases from		Depreciation		Interest expense		Right-of-Use Assets		Receivables		Lease liabilities			Other liabilities
Non-executive directors of the Group
2021		0		122		0		0		0		0		0			58
2020		0		85		0		28		0		0		0			0
2019		0		128		0		37		0		0		0			1,053
Shareholders of the Group
2021		0		30		0		6		0		77		0			60
2020		0		2		0		7		0		29		0			158
2019		0		113		0		9		0		0		0			131
Joint ventures
2021		0		0		0		0		0		0		0			0
2020		419		0		0		0		0		0		0	��		0
2019		1,431		0		0		0		0		1,279		0			0
Non-controlling interests
2021		0		0		0		0		0		0		0			0
2020		0		0		0		0		0		0		0			0
2019		0		0		26		9		617		0		652			0

Related party – Lunebeke NV / Ailanthus NV

Lunebeke NV is owned by a shareholder and director of the Group and was established on December 29, 2020 following a partial demerger of Ailanthus NV (a former related party of the Group that merged with Materialise NV subsequent to a partial demerger). The activities taken over by Lunebeke NV through the partial demerger of Ailanthus NV were taken over from Ailanthus NV with retro-active effect as of October 1

, 2021. The Group rents apartments on a regular basis from Lunebeke NV in order to host our employees from foreign subsidiaries who are visiting our headquarters in Leuven. Due to Covid, the total amount paid to Lunebeke NV for rent in 2021 was

K€37 (2020: K€0; 2019: K€113).

F-7

Table of Contents

27	Events subsequent to the statement of financial position date

Closing of acquisition of Link3D

On April 9, 2021, the Group acquired an option to buy Link3D Inc.. On November 15, 2021, Materialise provided notice to Link3D of its intention to exercise the option. The acquisition was completed on January 4, 2022. This acquisition was effectuated through the Group’s U.S. subsidiary, Materialise USA, LLC. As a result of this transaction, Materialise USA has become the sole shareholder of Link3D. Link3D is an additive workflow and digital manufacturing software company. The acquisition of Link3D is intended to strengthen and accelerate the creation of the Materialise software platform.

Impact of the armed conflict in Ukraine

To-date, most

our personnel from the office in Kyiv have continued to work for us throughout the armed conflict, either remotely from Ukraine or other neighboring countries or from our Wroclaw office, while others remain unable to perform their work. As of the date of this annual report, we have been able to continue servicing our customers without significant disruption or delay, as personnel with similar skills and competencies located elsewhere in the world have increased their roles and responsibilities to assist displaced personnel.

Although the impact of the armed conflict in Ukraine has not had a material adverse effect on our financial results to-date, we have incurred € 0.3 million as of February 24, 2022 related to the relocation and support efforts of Ukrainian personnel. We will continue to incur expenses and we will be affected by additional operating expenses from hiring additional and more expensive resources outside Ukraine.

In addition, although only a small percentage of our historical revenues was generated in Russia, we expect that the trade sanctions that have been imposed against Russia by, among others, the United States and the European Union, will have a negative impact on our revenue for the year ended December 31, 2022.

F-7

Table of Contents

28	Overview of consolidated entities


Name	Country of incorporation	% equity interest*
		2021			2020			2019
Materialise NV	Belgium		100	%		100	%		100	%
Materialise SAS	France		100	%		100	%		100	%
Materialise GmbH	Germany		100	%		100	%		100	%
Materialise Japan K.K.	Japan		100	%		100	%		100	%
Materialise s.r.o.	Czech Republic		100	%		100	%		100	%
Materialise USA, LLC	United States		99	%		99	%		99	%
Materialise UK Ltd	United Kingdom		100	%		100	%		100	%
OBL SAS	France		100	%		100	%		100	%
Materialise Austria GmbH	Austria		100	%		100	%		100	%
Materialise Sdn. Bhd.	Malaysia		100	%		100	%		100	%
Materialise Ukraine LLC	Ukraine		100	%		100	%		100	%
RapidFit NV	Belgium		100	%		83	%		83	%
Meridian Technique Ltd	United Kingdom		100	%		100	%		100	%
OrthoView Holdings Ltd	United Kingdom		100	%		100	%		100	%
Materialise SA	Poland		100	%		100	%		100	%
Materialise Colombia SAS	Colombia		100	%		100	%		100	%
Materialise Motion NV	Belgium		100	%		100	%		50	%
Materialise Shanghai Co.Ltd	China		100	%		100	%		100	%
Engimplan Engenharia de Implante Industria & Comércio Ltda	Brazil		100	%		100	%		75	%
Engimplan Holding Ltda	Brazil		100	%		100	%		100	%
Materialise Limited	South-Korea		100	%		100	%		0
Materialise Australia PTY Ltd	Australia		100	%		100	%		100	%
Materialise S.R.L.	Italy		100	%		100	%		100	%
ACTech GmbH	Germany		100	%		100	%		100	%
ACTech Holding GmbH	Germany		100	%		100	%		100	%
ACTech, Inc.	United States		100	%		100	%		100	%
Tianjin Zhenyuan Materialise Medical Technology Ltd	China		51	%		0			0

*	The overview provides the equity interest held as of 31 December of each respective year.

The entities Materialise GmbH, Gilching, Germany, ACTech Holding GmbH, Freiberg / Saxony, Germany and ACTech GmbH, Freiberg / Saxony, Germany, have taken advantage of the exemption regulations of § 264 (3) HGB (German Commercial Code) for the financial year ending December 31, 2019, 2020 and 2021.

The entity Meridian Technique Limited (company number 03478202) has taken advantage of the exemption regulation from the requirements of the Act relating to the audit of accounts under section 479A of the Companies Act 2006 for the financial year ending December 31, 2021.

29	Non-GAAP Measures

EBITDA and Adjusted EBITDA is used in the Note 21 Segments as one of the basis of the Segments performance measurement. We calculate EBITDA as net profit plus income taxes, financial expenses (less financial income), depreciation and amortization, and share in loss of joint venture. Adjusted EBITDA is determined by adding back share-based compensation expenses, acquisition-related expenses of business combinations, impairments and fair value remeasurements due to business combinations to EBITDA.

F-7

Positive
Negative
Uncertain
Constraining
Legalese
Litigous
Readability	H.S. freshman Avg

Large accelerated filer

Accelerated filer

Non accelerated filer

Emerging growth company