One Stop Systems (OSS) 10-K2021 FY Annual report

`

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

or

For the transition period from _________ to _______

Commission File Number 001-38371

One Stop Systems, Inc.

(Exact name of Registrant as specified in its Charter)

2235 Enterprise Street #110

Escondido, California 92029

(Address of principal executive offices, including Zip Code)

(760) 745-9883

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company.  See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

As of June 30, 2021, the last day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant was $87,262,850, based on the closing price of the registrant’s common stock on The Nasdaq Capital Market of $5.79 per share on such date.  This calculation does not reflect a determination that persons are affiliates for any other purpose.  

As of March 17, 2022, the registrant had 18,878,183 shares of common stock (par value $0.0001) outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

List hereunder the following documents if incorporated by reference and the Part of the Form 10-K (e.g., Part I, Part II, etc.) into which the document is incorporated: (1) Any annual report to security holders; (2) Any proxy or information statement; and (3) Any prospectus filed pursuant to Rule 424(b) or (c) under the Securities Act of 1933.  The listed documents should be clearly described for identification purposes (e.g., annual report to security holders for fiscal year ended December 24, 1980). None

One Stop Systems, Inc.

FORM 10-K

For the Fiscal Year Ended December 31, 2021

Table of Contents

2

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K (“Annual Report”) contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact contained in this Annual Report, including statements regarding our future operating results, financial position and cash flows, our business strategy and plans and our objectives for future operations, are forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. This Annual Report also contains estimates and other statistical data made by independent parties and by us relating to market size and growth and other data about our industry. This data involves a number of assumptions and limitations, and you are cautioned not to give undue weight to such estimates. In addition, projections, assumptions and estimates of our future performance and the future performance of the markets in which we operate are necessarily subject to a high degree of uncertainty and risk. In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “would,” “could,” “should,” “expect,” “plan,” “anticipate,” “could,” “intend,” “target,” “project,” “contemplate,” “believe,” “estimate,” “predict,” “potential” or “continue” or the negative of these terms or other similar expressions.  The forward-looking statements in this Annual Report are only predictions. We have based these forward-looking statements largely on our current expectations and projections about future events and financial trends that we believe may affect our financial condition, operating results, business strategy, short-term and long-term business operations and objectives. These forward-looking statements speak only as of the date of this Annual Report and are subject to a number of risks, uncertainties and assumptions, including those described in Part I, Item 1A, “Risk Factors.” The events and circumstances reflected in our forward-looking statements may not be achieved or occur and actual results could differ materially from those projected in the forward-looking statements. Moreover, we operate in a very competitive and rapidly changing environment. New risk factors and uncertainties may emerge from time to time, and it is not possible for management to predict all risk factors and uncertainties. Except as required by applicable law, we do not plan to publicly update or revise any forward-looking statements contained herein, whether as a result of any new information, future events, changed circumstances or otherwise.

One Stop Systems, the One Stop Systems logo, and other trademarks or service marks of One Stop Systems appearing in this Annual Report are the property of One Stop Systems, Inc. This Annual Report also includes trademarks, tradenames and service marks that are the property of other organizations. Solely for convenience, trademarks and tradenames referred to in this Annual Report appear without the ® and ™ symbols, but those references are not intended to indicate, in any way, that we will not assert, to the fullest extent under applicable law, our rights, or that the applicable owner will not assert its rights, to these trademarks and tradenames.

WHERE YOU CAN FIND MORE INFORMATION

We file annual, quarterly, and current reports, proxy statements and other information required by the Securities and Exchange Act of 1934, as amended (the “Exchange Act”), with the Securities and Exchange Commission (the “SEC”).  Our SEC filings are available to the public on the SEC’s internet site at http://www.sec.gov.

On our internet website, http://www.onestopsystems.com, we post the following recent filings as soon as reasonably practicable after they are electronically filed with or furnished to the SEC: our annual reports on Form 10-K, our quarterly reports on Form 10-Q, our current reports on Form 8-K, and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act.  The information in or accessible through the SEC and our website are not incorporated into, and are not considered part of, this Annual Report. Further, our references to the URLs for these websites are intended to be inactive textual references only.

3

PART I

ITEM 1. BUSINESS.

Company History

One Stop Systems, Inc. (“OSS” or the “Company”) was originally incorporated as a California corporation in 1999, after initially being formed as a California limited liability company in 1998. On December 14, 2017, the Company was reincorporated as a Delaware corporation in connection with its initial public offering of securities.

During the year ended December 31, 2015, the Company formed a wholly owned subsidiary in Germany, One Stop Systems, GmbH (“OSS GmbH”). Then, in July 2016, the Company acquired Mission Technologies Group, Inc. (“Magma”) and its operations.

On August 31, 2018, the Company acquired Concept Development Inc. (“CDI”) located in Irvine, California.  CDI specializes in the design and manufacture of custom high-performance computing systems for airborne in-flight entertainment and networking systems. CDI was fully integrated into the core operations of the Company as of June 1, 2020.

On October 31, 2018, OSS GmbH acquired 100% of the outstanding stock of Bressner Technology GmbH, a limited liability company registered under the laws of Germany and located near Munich, Germany (“Bressner”).  Bressner designs and manufactures standard and customized servers, panel PCs, and PCIe expansion systems.  Bressner also provides manufacturing, test, sales, and marketing services for customers throughout Europe.

Our principal executive offices are located at 2235 Enterprise Street, Suite 110, Escondido, California 92029, and our telephone number is (760) 745-9883. Our website address is www.onestopsystems.com. Information contained in, or accessible through, our website is for reference purposes only.

Business Overview

One Stop Systems, Inc. (“OSS” or the “Company”) designs, manufactures, and markets specialized high-performance computing modules and systems, which are designed to target edge computing deployments. Edge computing is a form of computing that is done on site, near a particular data source or the user (rather than in the cloud), minimizing the need for data to be processed in a remote data center.  This growing trend increases computing performance and security as the data does not have to travel to some distant data center location. These specialized modules and systems consist of computers and storage products that incorporate the latest state-of-the art components with our embedded proprietary software. Such modules and systems allow our customers to offer high-end computing capabilities (often integrated within their equipment) to their target markets and applications.

The fast-growing edge computing space consists of three major segments. The first segment is comprised of many smaller data centers that are located in close proximity to the users (or edge). These typically include compute and storage racks in environmentally controlled buildings, similar to large cloud data centers.  Suppliers in this space tend to be the same large server and storage manufacturers whose products are used at cloud data centers.  The second segment includes billions of Internet-of-Things (“IOT”) devices that may reside in everything from home appliances to the factory production floor. These IOT devices and applications tend not to be challenged on performance and easily communicate up to the cloud or the data centers on the edge.  OSS does not focus on either of the foregoing segments. The third segment is called AI Transportables.  These are primarily on land, in the air or at sea vehicles that need performance without compromise for artificial intelligence (“AI”) and Autonomous capabilities.  This is where OSS’ vision and strategy is aligned, and where we believe that we offer the greatest unique value to our customers.

4

Examples of applications that utilize AI Transportables range from autonomous trucks, busses, mining equipment, and aircrafts. Less mobile applications that utilize AI Transportables include items like medical equipment and mobile command centers. There is currently a growing demand for AI/autonomous capabilities within the commercial/industrial market, as well as for military use.

The AI and/or autonomous capabilities require these demanding applications to connect to a wide array of data sources and sensors, and to have the ability to quickly access and store large ever-growing data sets. They must be able to maintain ultra-fast processing power to act on data in real time at the edge location, which is independent of whether a high-speed network, like 5G, connects the edge application back to the distant central data centers. Standard servers and storage systems available in the market do not address the AI Transportable requirements. Although the network, if it exists, may transfer data or be used for updates, the latency is not acceptable for many of these applications where time is of the essence. This increases the need for data center type performance using the latest generation of products from companies like NVIDIA, AMD and Intel. In most of these applications, available space is limited and the number of inputs from sensors and other data sources are significant, thus, requiring high speed input/output (“I/O”) expansion like the latest in PCI Express, which OSS is known for in the market. In the case of vehicles, fuel efficiency, and particularly, in the case of aircrafts, AI Transportables come into play due to the need for lower weight materials. Additionally, the mobility of these systems creates the need for the equipment to survive drops, g-forces, vibration, dust, wide temperature swings, and moisture. Once you have a system that can operate and survive in these harsh environments, you need to be able to dissipate the heat and keep it cool.

While other edge computing suppliers may adequately serve the needs of the environmentally controlled edge data centers with the latest technology, the deployment of the same performance level in the AI Transportable space requires unique capabilities and knowhow, which is where we believe that we excel. Many companies that enter this space tend to offer solutions based on older and lower performance technology, whereas we advance our proprietary state-of-the-art technologies and utilize the latest generation of products to ensure superior performance. We leverage our proven track record of delivering first-to-market advanced technologies and technical strength, working with the latest high-speed networks like PCI Express 5.0 and NVIDIA’s NVLink. This is in addition to our expertise with compute acceleration and high-performance flash array storage systems. When combined with our execution and knowhow of deploying these systems in challenging environments, we bring the latest commercially available technology and products to this market. Unlike the edge or cloud data centers in a building, these applications bring on many unique requirements playing to our strength and create opportunities for additional barriers of entry.

Business Strategy

In March 2021, after reviewing our current business, market trends, the competitive landscape, reflecting on our strengths as well as listening to feedback from current and potential customers, we determined that it would be in the best interest of the Company and our shareholders to shift our primary focus to the development and sale of AI Transportables. At that time, 20% of our business was already in the AI Transportables space. Our AI Transportables business accounts for some

5

of our highest margins, repeat business, highest closure rate, and most importantly, we believe that it represents our highest value proposition when bringing together all our skills and experience.

Although it will take some time to pursue, secure, and turn these target opportunities into increased revenue and profits, we believe our new focus provides us with a unique opportunity to drive shareholder value. We are not abandoning current business in the process, but rather focusing on this market segment for future growth. We believe the implementation of the new strategy and vision can drive this portion of our business from approximately 20% of revenues today to over 50% in the coming years by providing an opportunity for a higher growth rate, margins, and profits. This starts with identifying and closing opportunities in this space. Approximately 50% of our current pipeline of prospects, that are not yet closed, fall within the AI Transportables space.

We see opportunities in both the commercial/industrial and military/government segments. Currently, our military business accounts for approximately 20% of our overall sales, but we anticipate this will grow to 50% over the next few years. Although the overall military budget will likely vary depending on the administration and global tensions, both of which can impact how many new aircraft carriers or tanks are built, we believe the priority will remain on implementing AI throughout the military theater, and that military funding in this segment is more likely to grow than decrease as the United States continues to be competitive with China.

A key element of our product strategy is technological leadership. We believe a first-to-market strategy is key to our ability to continue to win significant original equipment manufacturer (“OEM”) opportunities. As a result, we continue to develop new state-of-the-art products, providing a unique value proposition for our customers in the targeted space. Most recently, in November 2021, we introduced Rigel, the Super Edge Computing platform. This product brings to market the latest in Graphics Processing Units (“GPU”), Central Processing Unit (“CPU”), and memory products in a rugged compact form factor, which targets the AI Transportable space and which we believe to be the first of its kind.

Our ability to drive the leading edge of technology is enabled by our strong relationships with strategic component manufactures, including NVIDIA (for GPUs), Western Digital and Micron (for flash memory), Broadcom (for PCIe switch components), Mellanox (for networking) and Intel, AMD, and Marvel (for CPUs). In many cases, we have access to product roadmaps and other technical information relating to future technology. Access to this information allows us to begin our design process well before the future components we are designing even exist.

We sell our products worldwide to industry leading customers. We service over 1,800 customers per year worldwide, with major repeat customers including disguise, Raytheon, the Navy, Thales, and Alcon. Our operations in Europe are driven by our Bressner group located near Munich, Germany, which we acquired in 2018 to help us expand within the European market. Although they are primarily a value-added reseller for the Company and other suppliers in Europe, we have a team that is focused solely on the AI Transportable portion of our business and leveraging many of their existing relationships. We anticipate continued global market growth, especially in AI Transportables, and sustaining our ability to increase market share through our leading technology, engineering expertise, supply chain management, and go-to-market innovation.

Industry Background and Market Opportunity

The notion of network-based computing dates back to the 1960s, but many believe the first use of “cloud computing” in its modern context occurred in 2006 when Google’s then-CEO, Eric Schmidt, introduced the term during an industry conference. Years later, the explosive growth of internet-connected devices (“IoT”), along with new applications that require real-time computing power, started to create the drive for edge-computing systems. As the demand for AI on the edge and autonomous vehicles grew, so did the need for high-performance solutions to operate in harsh environments.

Edge computing is one of the fastest growing markets driven by the need to do more at the edge. We estimate the edge computing market to be valued at approximately $200 to $400 million currently, and we anticipate that it will grow to $1 to $5 billion in the coming years. According to Gartner, Inc., a leader in technology research, only 10% of data was gathered and processed at the edge in 2018; however, it is expected that this number will grow to 75% by 2025. This dramatic change is driving an expected growth of over 38% per year between today and 2028, according to Grand View Research, resulting in an estimated market of $61 billion later this decade. OSS’ objective is to be the technology and market leader in the AI Transportable segment of this market.

6

Three technologies are fundamental to the edge computing space: GPU compute accelerators, flash memory-based storage, and high-speed data acquisition I/O. These technologies enable systems to ingest, process and store data at significantly higher rates than traditional systems. By harnessing large quantities of these components, companies can receive necessary data analyses much more quickly and in a more secure manner, and as a result, turn raw data into actionable intelligence. Industry experts typically divide the high-performance computing market into the following categories:

The AI Transportable markets tend to implement AI, autonomous, and/or semi-autonomous capabilities. We believe markets for these products are large and growing. Applications deploying these technologies today, or that we expect to do so in the future, include:

We expect these applications to deploy increasingly faster computing systems in order to meet industry and competitive goals.

GPU Compute Acceleration

The capabilities and speed of GPU accelerated computers are driving significant advances in AI and machine learning. Massive amounts of data are collected, stored, and analyzed by today’s sophisticated algorithms. We are enabling the growth of such AI capability.

High Density Solid-State Storage

The proliferation of larger and larger data sets used in edge computing, including AI, is feeding the need for higher capacity and higher performance storage devices. Traditionally, companies have used hard disk drives for their primary storage. Hard disk drive-based systems are being replaced by flash memory-based systems, which offer higher capacity, performance, reliability, and ruggedness. Flash-based storage systems also consume significantly less power.

High Speed Data Acquisition

At the front-end of AI Transportable systems is high speed data acquisition technology. Depending on the application, the data can be generated from a wide array of sensors. In the case of an application utilized by autonomous vehicles, data is generated through arrays of video, LIDAR, and radar sensors. In battlefield applications, cameras, radar, sonar, FLIR (infrared), and RF sensors are deployed to generate data. In Medical applications, MRI or CT sensors are deployed to generate data, and in security applications, networks of security cameras produce high volumes of video data.

Key Components of Our Business

Product Development

Our systems are built using the latest GPU and flash storage technologies that draw upon years of expertise in designing and manufacturing semi-custom as well as standard systems for OEMs. We have a history of being first-to-market with many solutions for emerging technologies. When PCIe was introduced in 2005, we were the first company to produce PCIe over cable adapters allowing system-to-system communication at the same speed as internal I/O expansion reducing latency significantly. Similarly, in 2018, we introduced the first PCIe Gen 4.0 cable adapters, and in 2019, we introduced the

7

first PCIe Gen 4.0 system building blocks and platforms in which the PCIe Gen 4.0’s ultra-high performance 16.0 GT/s (giga-transfers/second) and signal integrity challenges limits the number of players in this market and creates barriers to entry. Today, we are one of the largest providers of PCIe adapters and expansion components used worldwide. In 2022, we intend to introduce a broad set of products utilizing PCIe Gen 5.0, which once again doubles performance to 32.0 GT/s.

When GPU technology and solid-state flash were first introduced, we began designing systems that maximized the effectiveness of these technologies. We now produce compute-systems with large numbers of GPUs and flash memory that communicate over PCIe and allow faster processing, data storage, and data retrieval. The more GPUs and flash devices available to a server, the faster that system can process and store data.

We use leading edge, state-of-the art components from major technology providers to design purpose-built systems that solve customer problems in an efficient, cost-effective manner. We apply the component technology provided by Intel, AMD, NVIDIA, Western Digital, Broadcom, and others to deliver solutions to provide true value to our customers.

Worldwide Sales

We sell our products on a worldwide basis and are supported through a network of manufacturers’ representatives, resellers, and distribution partners. Sales in North America and Europe are predominately driven by our direct sales force and manufacturers’ sales representatives, whereas sales in Asia are driven through our distribution partners.

In October 2018, OSS GmbH (a wholly owned subsidiary of the Company) acquired Bressner Technology GmbH (Bressner), located in Gröbenzell, Germany (near Munch, Germany). This acquisition created a base for us to expand our European operations for sales, marketing, engineering, manufacturing, and support capabilities.

What Sets OSS Apart

Several factors differentiate OSS from other suppliers of high-performance edge computing solutions, including, without limitation the following:

Our business model consists of developing specialized computing solutions that our customers utilize as a key component of the equipment that they sell to end users. Our niche is to provide reliable purpose-built platforms with the latest high-performance computing technology that is focused on challenging edge deployments that are mobile.

Business Strategy

We have traditionally followed a strategy of being first-to-market in leading edge deployment technologies by designing and developing products that are delivered before our competitors. This market leadership strategy is accomplished through what we term as the “Catch the Wave” approach to the market. We currently have products spanning the spectrum of

8

high-performance computing including servers, flash storage, GPU acceleration, networking and PCIe data acquisition I/O expansion. Within these product areas, the OSS “Catch the Wave” approach implies that we:

Earnings Growth Strategy

We intend to implement different strategies to continue our revenue growth, while improving earnings. We believe that earnings growth can be accomplished by taking the following actions:

Revenue growth driven by existing OEM and new design wins:

Higher margins:

Optimize expenses:

9

Our Opportunity

The worldwide edge computing market is expected to grow at a compounded annual growth rate (“CAGR”) of 38% to $61 billion by 2028 (Grandview research, “Edge Computing Market Size,” May 2021). Within this market, we are positioned and focused on the AI/autonomous portion at the very edge, which we call AI Transportables, and we believe that this market could be as large as $5 billion within several years. The products we develop to address this market include custom compute and storage servers, as well as edge optimized PCIe expansion systems. These PCIe expansion systems can be populated with a range of high-end GPUs, FPGAs or Nonvolatile Memory Express (“NVMe”) drives to create Compute and Storage Accelerators that attach to general purpose servers.

Our Technology

We design and manufacture high performance computing systems for use on the AI Transportable edge, which are designed to increase compute performance while surviving in harsh environments. Our high-density compute accelerators connect directly to a server’s PCIe bus, delivering substantial compute performance. Our flash storage arrays support hundreds of terabytes of high-speed storage that can also be accessed by multiple servers.

Technology Drivers for OSS High-Performance Computing Business

We have developed expertise and core competencies in the three fundamental technology drivers within today’s high-performance edge computing market – high-speed serial interconnect technology, compute acceleration utilizing GPUs, and low latency flash storage. In combination, these three fundamental technologies are changing the economics of computing, bringing high-performance computing within the grasp of a wide range of new industries and commercial applications on the edge. Simultaneously, the emergence of massive amounts of data being generated in each of these industries is pushing the requirement for state-of-the-art technology. We are enabling this state-of-the-art technology to be deployed at the edge by merging these fundamental technologies with our expertise and providing system level customization for meeting requirements for ruggedization and space, weight, and power (“SWAP”) constraints. Our strategy is to be the leader in the platforms for AI Transportable applications, and our strategy is based on our unique ability to design high quality performing AI workflow compute/storage engines that can be deployed in harsh dynamic environments, which require unique system level features for vibration, cooling, and power.

We strive to not only provide competitive advantage for companies, but also to address some of the most fundamental challenges in military, life science, energy, and security applications. We believe that we are well situated to leverage these major industry forces. By exploiting our unique set of expertise in the underpinning technologies of high-performance computing, we strive to continue to deliver industry leading solutions and to take advantage of the opportunity to capture a growing market share in this rapidly expanding marketplace.

Switched Serial Interconnect

Switched serial interconnects are the data highways connecting many elements of today’s high-performance computing platforms. At ever increasing speeds, these pathways move data between system’s processing units, storage, networking, and peripheral elements. For high-performance computing, the primary processing, storage and peripheral interconnect is PCIe. Currently, PCIe Gen 4.0 has an ability to run up to 16 lanes in parallel, which allows up to 64 gigabytes (full duplex) per second bandwidth between system elements. We intend to introduce products based on PCIe Gen 5.0 during 2022, which is anticipated to double the system bandwidth.

Compute Acceleration with GPUs

GPUs have evolved from graphics display acceleration to becoming general-purpose processing workhorses for high-performance computing systems. Today, the majority of the fastest supercomputers in the world utilize GPUs as their primary compute engines. GPUs are ideal for high-performance computing workloads because of their ability to do massively parallel processing. While today traditional CPUs may have dozens of processing cores, GPUs have thousands of cores that are able to execute calculations simultaneously.

NVIDIA, a key supplier of GPUs to the market, lists more than 400 such applications across a broad set of market spaces including, without limitation:

10

While NVIDIA is focused on the deployment of their GPUs in data centers and for gaming purposes, we are focused on taking this capability to the edge. Many of these applications also scale performance, based on the number of GPU components utilized. We have designed multi-GPU systems, including up to 16 GPUs in a single system. Current state-of-the art GPUs provide over 7 teraflops of performance, with future products set to dramatically increase overall processing capabilities in the years to come.

GPUs also pose significant system design challenges due to their high-power requirements. High-end GPUs can require 500 watts of power or more, which generates a tremendous amount of heat. Sophisticated power distribution and cooling designs are required, especially for large-scale systems with multiple GPUs per chassis.

PCI Express Flash Storage – NVMe protocol

The use of flash memory technology for system storage has gained traction over the past decade, which we believe to be a result of the continuous decline in the cost per gigabyte. Flash memory is now becoming the ubiquitous storage technology in high-performance systems.

Combined with the move away from traditional rotating hard drive technology, there has been the trend toward eliminating traditional storage protocols in favor of low latency flash memory protocols. Newer flash memory modules utilize a protocol known as NVMe, which connects the flash memory directly to the system’s PCIe interconnect. This direct connection allows for very high bandwidth between the storage and the other system elements, which eliminates the need for protocol translation as data moves from storage subsystems to and from the compute complex.

Today, flash memory modules with capacities up to 16 terabytes and PCIe Gen 4.0 interfaces are now available. Our flash storage arrays with hundreds of terabytes of capacity are also available, enabling the scaling of high-speed storage to meet the full range of high-performance edge application requirements.

Our Core Technical Capabilities

We have developed unique expertise and core competency across the fundamental technologies of today’s rapidly expanding specialized high-performance edge computing marketplace. These valuable assets are embedded in the leading-edge engineering capabilities of our engineers, the proprietary intellectual property residing in our vast library of designs, and our brand equity based on our reputation as a high-quality producer of state-of-the-art, custom and standard solutions across a broad array of markets.

High Speed System Interconnect Design

Our electrical engineers are experts in high-speed digital signaling design. They have continually designed at the leading edge of the state-of-the-art signaling speeds, even as semiconductor technology has driven up the clock rate of digital transmission. We have consistently been among a small handful of companies able to come to market first with the latest technology. In fact, we delivered the industry’s first PCIe over cable solutions for PCIe Gen 1.0, Gen 2.0, Gen 3.0, Gen 4.0, and are currently on track to accomplish this again for Gen 5.0, which is expected to begin deployment in 2022. The expertise required includes circuit design, PCB (printed circuit board) layout and routing optimizations, all of which focus on achieving the highest levels of signal integrity. In our current systems, PCIe Gen 4.0 signals are propagated across multiple PCBs, connectors, and copper cabling, while maintaining the ability to recognize digital signal transitions at 16 billion times per second.

11

In high-performance computing systems, especially those systems that operate on the edge, the trajectory and need for ever-increasing signaling speeds is continuing; provided, however, the number of companies that have the capability to design robust, highly-reliable systems at speeds that can tolerate the harsh conditions on the edge are continuing to decline. We believe our core competency in large-scale, high-speed design, and layout will allow us to remain on the forefront of this growing industry.

Complex System Design

In addition to low-level signal integrity design expertise, we have amassed expertise and intellectual property in high-performance system architecture design. This expertise allows us to develop extremely sophisticated systems with massive scaling, while also meeting customer demands for reliability, cost, and flexibility. To do so, we have developed deep knowledge for high-capacity input/output systems, operating system adjustments, and required configuration tuning. Due to this development, our engineers are often called upon to co-design with OEM designers to create the perfect solution to fit the needs of their customers.

For highly scalable systems, a deep understanding and experience with switching topologies and interconnect fabric design is required. We have worked with serial switching technology starting with the first generation of PCIe and have been an innovator in creating unique and flexible topologies to meet the specific needs of customers. Creating custom solutions for unique customer solutions is a core competency at OSS, and we rely on this deep knowledge of switch capabilities and limitations.

For maximum system performance, design for optimizing data transfer speeds is also an important consideration. We have developed expertise in system design to leverage peer-to-peer data flows between GPUs and pioneering techniques for optimized data flows between flash storage and GPU compute-engines. Our systems optimize switch and GPU configuration topologies to optimize GPU-to-GPU communication without requiring latency-inducing data transfer between host dual processors. Our platforms feature RDMA (remote direct memory access) across compute-nodes, which support data transfer without burdening the host CPU.

We have pioneered the ability to extend the PCIe bus beyond the confines of a single enclosure, opening the possibility of flexible system expansion options. We believe we are one of the leading designers and suppliers of PCIe host bus adapters that extend PCIe signals from the host motherboard across copper or optical cables to expansion enclosures. Our adapters provide both ends of the external cable connection. Our expertise in high-speed signal design in printed circuit boards, connectors, and cables is essential to successful expansion designs. We also hold expertise in incorporating clustering and rack scale expansion into our system designs, including 200/400 gigabit Ethernet, 200/400 gigabit InfiniBand, and emerging PCIe top-of-rack switch technology.

Expertise in power, cooling, and mechanical design are required to address the requirements of the high-performance computing customers, especially while meeting the constrained time requirements of edge deployments. We have developed leadership design capability in high-power design and distribution within large rack enclosures as well as edge optimized configurations. High-end GPUs today require 500 watts or above, and in our high-end systems, up to 16 of GPUs can reside in a single chassis. Thousands of kilowatts of redundant power are required. Power stability and huge thermal loads are some of the critical design issues that must be addressed. Additionally, at the edge for AI applications, a wide range of input power sources need to be supported from standard 110-220 VAC to 270 and 48 VDC for terrestrial vehicles to three phase 400-800Hz AC for airborne applications.

We have expertise in power distribution, redundant power, and complex chassis cooling design, including materials selection, airflow simulation, fan technology, and cable routing. We have also developed extensive intellectual property to help ensure regulatory compliance of our complex high-performance computing system designs that span across emission, shock, vibration, thermal, humidity, and other environmental requirements that are required for highly reliable and highly available solutions. Our engineers are experts in design for regulatory testing for FCC (Federal Communications Commission), CE (European Conformity), UL (Underwriters Laboratories), and Mil-Spec (Military Standard) standards. Additionally, we have expertise in rapid prototyping, design for manufacturability, and design for serviceability.

Storage Management Software

Given our hardware design and integration expertise, we believe that the next step is to add a robust software capability that will allow us to offer more optimized and customized systems. Our Ion software design team provides the expertise to deliver full server and storage solutions that produce the highest performance from today’s leading-edge flash storage devices. The Ion software allows flash-based modules to be put into a variety of storage and network configurations

12

which can then be accessed by multiple servers. The Ion software can do this cost-effectively, while preserving the low latency that is vital for many business and mission-critical enterprise applications, from database and transaction processing to massive data collection programs.

Benefits of Technology and Core Capabilities to our Customers

Due to our core capabilities, we can provide our high-performance computing customers with platforms that are highly reliable and cost effective. Such performance allows our customers to solve bigger problems faster, and save the cost and time of highly-paid engineers, data scientists, and other human resources. Our technology enhances innovation by allowing more ‘what-if’ analysis in a finite amount of time. Our price/performance leadership enhances our customers’ competitiveness and lowers capital expense and total cost of ownership. We work with our OEM customers to develop custom ‘perfect fit solutions’ for their unique requirements.

Our Products

Compute Servers

Within the server sector, we have secured a niche position of building purpose-built specialty servers, which the major server suppliers choose not to supply, as they require custom tuning and special features that major OEMs cannot easily provide. Our compute servers are designed to provide the highest level of performance that can be deployed in harsh edge environments. Our extensible operating system (“EOS”) line of servers is optimized for supporting a high number of expansion chassis. Servers in this product family have a large number of slots that are compatible with the PCIe host bus interface cards that we have developed. These cards enable PCIe connection over cable between the hose processor and downstream I/O devices. These servers have custom basic input/output systems (“BIOS”) to ensure they work seamlessly with expansion chassis and support a high number of downstream I/O devices. Our software-defined storage (“SDS’) line of servers support rugged deployment in space constrained environments providing a maximum depth of 20 inches.  We believe that our newly announced “Rigel Edge SuperComputer” (“Rigel”) is the highest performance, most dense, AI-compute platform that is deployable in extreme environments, including on military aircraft. We also design custom servers; for example, a server with custom connectors and 16 high-definition video media outputs that are used in the entertainment industry to provide multimedia at live performances.

GPU computing uses hardware components that are optimized to perform mathematical calculations in a rapid fashion. NVIDIA is the market leader in the design and manufacturing of these components. We work closely with NVIDIA to design and build systems which use multiple GPUs to accelerate applications.

Emerging markets and applications such as AI, image rendering and processing, autonomous vehicles, deep learning, molecular modeling, genomics, advanced visualization, machine learning, and image processing, all benefit from the ability to use GPUs to accelerate the application. We build specialized compute-servers and accelerators used in these emerging growth markets. We estimate these markets to be very large and growing. Because our strategy has been to be first-to-market with the fastest and densest compute appliances, we anticipate our addressable market to be in the hundreds of millions of dollars.

Storage Servers

We also build standard and custom flash storage arrays utilizing our unique know-how in PCIe device fan-out, packaging, cooling, and PCIe-over-cable. We deliver dense, high-performance systems that provide customers with high value and utility in the most demanding, data-intensive operations. These OSS Storage Servers complement our compute servers to provide an end-to-end edge solution for AI workflows.

Through a strategic agreement with Western Digital, we acquired a software engineering team on July 1, 2017, and entered into a license agreement to obtain rights to the appropriate source code for the Ion flash array software. This provides our flash arrays with a high level of differentiation relating to storage management, latency, and throughput. We provide standard flash array products and have the in-house hardware and software expertise to provide customized systems for demanding applications that are not suitable for standard offerings. For example, we provide products to a large military contractor for integration into military aircrafts that require us to design and manufacture a highly ruggedized mil-spec flash array. The resulting product provides high data density with low weight, a high degree of portability, and security for data protection. We believe our experience and capability in high speed, low-latency, digital signaling via PCIe gives us an edge in providing custom designs to OEMs, military programs, and other special purpose applications.

13

We believe that because our products are positively differentiated by speed, density, and management features for challenging edge applications, our offerings compete favorably in this market and provide a substantial growth opportunity.

PCIe Expansion and Adaptors

PCIe is the high-speed standard for communications within a computer. This standard defines the signals and connectors (i.e., slots) that are used for computer add-in cards (such as Ethernet or graphics). Traditionally, communication between computers in the network is completed via Ethernet. Although Ethernet is great for large networks, this introduces delays and latency challenges.  To keep performance at the highest level, PCIe signaling can also be routed over a cable, allowing expansion input/output slots to be physically located in a separate chassis. This provides for high-performance and low latency, which are essential in this market.

Being able to separate the server from the I/O expansion, by using PCIe over a cable, facilitates disaggregation of server functionality. That is, with PCIe, server I/O functions no longer need to be contained in the physical server chassis, but instead, can be separated into a separate chassis and continue to operate at full speed. This offers many advantages over higher latency and power consuming traditional networking communications like Ethernet. From a practical perspective, servers can be connected directly to larger storage arrays or other peripheral devices, with the resulting group of chassis operating as if they were all in the same physical chassis.

We began developing our first PCIe-over-cable adaptor in 2006, and were one of the early providers of PCIe adaptors. We recognized this space as a prime opportunity to utilize our core strengths, such as:

This technology has now become a standard within the computer industry, our customers have used our adaptors to connect their custom input/output chassis and achieve performance equivalence as if the input/output was integrated into the server box. This gives designers and integrators a degree of flexibility and utility in architecting computer systems that is unprecedented. We have expanded our PCIe adaptor market in breadth and depth, including making adaptors for many OEM customers.

With our expertise developed in designing adaptor cards, the logical extension of our capability led us to develop a method for expanding the PCIe bus into an external chassis containing one or many expansion slots. This allows a customer to install multiple standard PCIe boards into a chassis and expand their system without having to add additional servers. These are typically GPUs, FPGAs or NVMe drives to create large-scale Compute and Storage appliances. For example, we have developed a product for deployment in a mobile command center, which aggregates large amounts of high frequency data from sensors and allows in the field AI algorithms to operate in real time. This is achieved through a cluster of our Compute and Storage products. A user can now connect a multiplicity of PCIe devices to a single server, and achieve performance throughput and low latency, what was not possible prior to the introduction of PCIe.

We have been a leader in PCIe expansion backplanes and chassis through generations 1.0, 2.0, 3.0, and 4.0. As PCIe evolves through generations 5.0 and 6.0, we believe that we are uniquely positioned to continue our leadership role in this market. We have introduced a full line of PCIe Gen 4.0 products, and expect to take a leadership role with PCIe Gen 5.0 as we introduce products in 2022. We currently offer what we believe to be the largest PCIe expansion product line, with chassis and backplanes that offer expansion from one to 64 slots. Due to its greater data throughput and flexibility of design, we believe this is a growing market, and we intend to maintain our leadership role within the market.

14

Additional Compute Products

Through our Bressner subsidiary, we provide small, form factor high-performance industrial and panel PCs compute-platforms customizable to meet needs in industrial applications on the edge where space constraint is a fundamental consideration.  We also provide ruggedized, mobile tablets and handhelds that meet the specialized requirement for devices deployed at the edge in a diverse set of environmental conditions.  

Customers

We serve a global clientele consisting of multinational companies, governmental agencies, military contractors, and leading technology providers. Some of our key customers are set forth below, illustrating the class of customers we pursue with our sales, product marketing and marketing communications efforts.

Raytheon – We work closely with many of the US Government agencies and prime contractors to bring the latest technologies to mobile edge applications. Raytheon provides an excellent example of how we adapted high-performance computing elements used in air-conditioned datacenters to the rigorous environment encountered in a US Navy aircraft. We worked closely with Raytheon to build a customized NVMe storage array, with drives installed in removable canisters for high-speed sensor data acquisition, encryption, and recording. This massive amount of mission data can then be easily off-loaded upon landing the aircraft and sent to the traditional government data center, which is a significant development given that satellite network links are too slow to handle transmitting that amount of data. To further enhance the data collected, we embarked on a second project with Raytheon to build a GPU accelerated “datacenter in the sky” system to enable mission data collected in the flash array to be analyzed and run through AI algorithms in real time while the mission was in process. This allowed the aircraft and crew to make real time decisions using the same level of processing power available in a ground-based system. Finally, we enhanced that “datacenter in the sky” with a 3-system cluster to provide large scale resources during missions and to carry out multiple AI tasks in real time. These applications are great examples of AI transportable end products. We have continued to enhance and refresh the technology for this program while working on opportunities with other prime contractors, including other mobile applications such as video surveillance, video analytics and autonomous vehicles on land, in the sea and in the air.

disguise – disguise is the leading provider of hardware and software that allows their customers to produce live events, television broadcasts, theater effects, and special effects for concert tours. In addition to its live event products, disguise is becoming a leader in the virtual world by leveraging the same technology and our products to create realistic 3D backdrops in movie and broadcast studios around the world. We have worked with disguise to design purpose-built, rugged servers that act as video controllers to create the virtual and visual effects used in these applications. These edge servers require high performance to create the most demanding effects, but also must be rugged enough to move from venue to venue every night. The edge servers operate seamlessly with disguise’s software applications on set, providing a rich array of special effects and extended reality experiences. Events like the Super Bowl halftime show, sporting events, feature films, music videos, broadcast studio, metaverse experiences and numerous musical concerts rely upon disguise controllers, designed, and produced by us to deliver a lasting impression on audiences.

National Instruments – National Instruments is a market leader and multinational company that produces automated test equipment and virtual instrumentation software. We provide several PCI Express-based interface cards that are branded by National Instruments and used in capturing and controlling sensors that produce AI datasets. We act as an extension to National Instruments’ engineering group, allowing National Instruments to complete their product roadmap in a timely and cost-effective manner.

Alcon – Alcon is a market leader in the production of computer assisted medical equipment. Our European subsidiary, Bressner, provides several rugged, purpose-built, high-performance workstations used in performing these AI assisted surgeries.  Bressner works directly with Alcon engineers to co-design and assist in securing medical certifications for the products that doctors and patient trust for pinpoint accuracy and speed.

15

Sales and Marketing

Our sales and marketing efforts are focused on promoting sales, producing expert content, and brand awareness.

Sales

Our sales efforts consist of five main channels:

Marketing Communications

Our marketing communications department is responsible for positioning OSS as an expert and visionary in the AI Transportables market.  We generate expert content to support our market leading products, while also building cost effective brand/product awareness in several ways. We use traditional and non-traditional marketing communications, as well as partnerships and word of mouth, to convey the uniqueness and compelling value of our products and services. The AI Transportable market applications we target include AI inference applications in autonomous vehicles, medical equipment, commercial aerospace, defense/government, oil and gas exploration, and media and entertainment. Bressner additionally targets embedded industrial and IoT customers in the EMEA region. Among the many channels utilized are:

16

As we grow, it is anticipated our marketing efforts will likewise continue to increase in size and focus on the AI Transportable market.

Competition

Our core business is to provide specialized high-performance edge AI computing platforms to OEMs who incorporate these products into their complete solutions, which they then sell to end users in the AI Transportable market. Due to the nature of our business, there are a number of categories of potential competitors of our products.

Customer in-house design resources

Many of our target OEM customers have in-house engineering design resources, which could be used as an alternative to engaging with us. Examples of current OSS customers who have significant in-house resources include National Instruments, Raytheon, and Lockheed Martin. This potential competition is mitigated by the technical specialization that we have, especially in high-end and large-scale PCI Express switch fabrics and PCI Express over cable capabilities. OEMs can invest their in-house resources on value-add capabilities within their specific vertical market and outsource these horizontal technology capabilities to us. We have also developed a trusted partner relationship with many of these OEMs and have established a market reputation for technical expertise and a responsive and cost-effective engagement model. We win when our customers realize that together we can produce better products faster and more cost-effectively than they can by themselves. This has proven to be particularly evident when customers require state-of-the-art products that are constructed of parts available commercially. This has resulted in several program wins that demonstrate our flexibility and how we can work closely with large OEM and government customers. Interestingly, it appears that when these large companies cut back on their workforce or have limited funding, such events bolster our position, as we may become these companies’ only option to get their desired product or service deployed within a reasonable period.

Major Tier 1 & 2 Mainstream Computer, GPU and Storage Vendors

These vendors offer mainstream high-performance computing platforms, including servers and storage systems that can address some applications at the edge in our target markets. Typically, they do not; however, offer the ‘specialized’ platforms or customization capabilities that we specialize in to meet unique form factor, power, ruggedization or scale out requirements sought by OEM customers. Generally, these vendors focus on the large, air-conditioned data centers and competing with such vendors based on price/volume as differentiation is challenging. Our strategy is specifically designed to avoid head-to-head competition in this part of the market with this class of vendors. In some scenarios, we can provide a complementary specialized component or building block, which interfaces with one of these vendors’ mainstream products. Examples of companies in this space include NVIDIA, HP, Dell/EMC, IBM, SuperMicro, Pure Storage, and NetApp.

Vertical High Performance Compute Vendors – Military/Aerospace

In certain vertical markets, there are competitors who focus primarily on the high performance compute (“HPC”) military and aerospace markets. These vendors often provide complete solutions, including both hardware and software, and some specialization in terms of form factor and ruggedization. In these markets, we provide unique capability in terms of

17

scaling of PCI Express components over cable (copper and fiber) that can address unique requirements of specific military or government programs. Many of these competitors use older technologies in these more challenging environments.  We are able to differentiate ourselves from such competitors due to the fact that we deploy the latest high-performance technology which enables us to provide superior products to potential customers in this space.  We have also established good relationships with prime contractors or governmental agencies (Raytheon, Lockheed, Boeing, NASA, ONR, and others), which can be important influencers or decision makers on technology selection. Competitors in this space include companies such as Mercury, Crystal, Curtiss Wright, Kontron, Trenton, Core Systems and Systel. In the past, we have been able to offer the latest technology to the rugged edge, which is normally only deployed in commercial applications, well before our competitors by leveraging our “performance, without compromise” strategy.

Manufacturing and Operations

OSS and Bressner are certified under ISO 9001-2015 for “design, manufacture, and supply of industrial computers.” This means OSS and Bressner have demonstrated their ability to consistently provide products that meet both customer requirements and applicable government regulations or statutory requirements. In February 2022, OSS upgraded its ISO 9001 certification to the higher tier, AS9100, which is the pinnacle of quality management systems recognized by government and aerospace companies world-wide. It also indicates that we have programs and processes in place to ensure a high level of customer satisfaction, as well as continuous improvement and risk mitigation programs that ensure we get better over time.

While OSS and Bressner primarily utilize lean principles to drive our manufacturing and assembly process, we recognize the importance of smooth builds and strategic inventory in this current climate of sustained supply chain shortages. One of the key aspects of utilizing lean principles is our application of just-in-time principles to ensure effective ordering and utilization of inventory. This also helps optimize cash flow throughout the manufacturing cycle. Within the manufacturing process, our operations encompass three categories of “builds”:

We are dedicated to quality and customer satisfaction. Our continuous improvement efforts require us to review products, services, and processes with the idea that minor changes can lead to greater outcomes for our customers. Although we serve the high-end of the rugged edge computing space, we are constantly looking for ways to become more efficient and drive down costs while driving up margins.

Research and Development

Our ability to compete successfully in our industry is heavily dependent upon our ability to ensure a continuous and timely flow of competitive products, services, and technologies to the marketplace. We continue to develop new products and technologies and to enhance existing products that will further drive commercialization. We may also expand the range of our product offerings and intellectual property through licensing and/or acquisitions of third-party businesses and technologies.

Our intellectual property research and development is focused on the exploitation of key technologies as they evolve in the marketplace. Our product roadmap reflects new technologies for CPUs, GPUs, flash storage, and advanced PCIe switches. We design first-to-market, unique implementations targeted at the AI Transportable market utilizing market leading component technologies. Accordingly, our focus lies not in the capital-intensive development of silicon implementations of technologies (i.e., chips, processors, GPUs, or storage devices), but rather leverages leading-edge technologies and building first-to-market products that fully exploit those technologies to solve customer problems in challenging environments.

Our research and development strategy can be summarized as follows: We drive customer program wins by utilizing new key technologies to develop products that are leading edge and first-to-market and that are designed to solve challenging problems in harsh environments, while working closely with our customers to understand and address their needs.

18

Intellectual Property

Our primary intellectual property value emanates from the more than 600 individual design projects that we have undertaken over the decades since our founding, experience, and knowhow, in addition to trade secrets and copyrights. These designs are archived and cataloged; we rarely begin a new design from scratch, but rather, typically use our archived and cataloged designs as a starting point to efficiently provide products to our customers.  In general, we maintain intellectual property rights with respect to the components of the products we design and sell so that we may continue to use them for future sales and development efforts.

Over the years, our team has developed and maintained expertise in high-speed signal design and analysis, electronic and mechanical packaging, PCIe-over-cable, fiber optics transmission, high-speed/density flash arrays, and integration and deployment of GPUs in compute accelerators and servers. This extensive expertise positions us to expand and rationalize our product line to meet the growing and ever-changing high-performance computing market. We believe that the expertise of our staff is a considerable asset closely related to intellectual property, and attracting and retaining highly qualified employees is essential to our business.

Markets, Seasonality, and Major Customers

Our products and services serve a global clientele consisting of multinational companies, governmental agencies, military contractors, and leading technology providers. Based on recent market experience, it appears there are seasonality factors with deliveries decreasing in January and February each year. At Bressner, this is likely a result of Asia’s holiday season, whereas at OSS, this is more of a result of varied government and commercial customer appropriation cycles and the timing of budgets, which tend to be larger later in the year; however, we believe these market factors will continue to evolve and our insight into these trends will improve.

During 2020 and 2021, we experienced an impact from the COVID-19 virus.  This included reduced demand from some current and potential customers serving specific markets.  The media and entertainment industries experienced delayed or canceled live concerts, other large in-person events, and sporting events. This resulted in less demand for their products and services, which consequently resulted in a decrease in demand for our products designed for use in these industries.  Fortunately, some of the decrease in demand for our live media and entertainment focused products was offset by growing demand for virtual events especially in 2021.  The commercial aerospace market was also impacted when air travel dropped significantly due to various COVID-19 related factors, such as stay-at-home orders, travel restrictions, the fear of being exposed to the virus in an aircraft and later by the shortage of crew members. With aircrafts flying at lower capacities or sitting idle, the spending budgets were cut drastically, which decreased the demand for our commercial aerospace customers’ products resulting in a decrease in demand for our products designed for use in the industry.  We cannot currently predict how the pandemic will impact our business in the future; however, it may continue to impact our customers and our business in 2022.

For the years ended December 31, 2021 and 2020, an aggregate of 36% and 24%, of our total consolidated revenues respectively, were attributable to two customers (disguise and Raytheon). A loss or decline in business with either of these customers could have an adverse impact on our business, financial condition, and results of operations.

We typically provide our products under contract supply agreements or purchase orders. We provide our products, software, and services from our offices located in California, Utah, and Germany. 

Materials and Suppliers

Although most components essential to our business are generally available from multiple sources, we believe that a loss or limited availability of certain component suppliers and manufacturing vendors could have a material adverse effect upon our business and financial condition.

Prior to 2021, we did not experience significant delays in the supply or availability of our key materials or components provided by our suppliers, nor did we experience a significant price increase for materials or components. In 2021, the worldwide supply shortage created many challenges, resulting in the need for our team to implement different strategies and analyze how we allocate resources. Currently, we are experiencing unavailability of products and limited supplies, protracted delivery dates for components, increasing product costs, and changes in minimum order quantities, which creates limitations on our ability to secure product. Shortages have ranged from semiconductors to packing materials for

19

shipping. As a result, we are carrying increased inventory balances to ensure availability of necessary products and to secure pricing. Additionally, products that are in the “work-in-process” stage and the inventory of finished goods have increased due to timing and availability of certain componentry necessary to complete our products. We have worked with suppliers and customers to provide multiple options, including the alternative sourcing of similar products. We manage the business carefully to minimize any material impact to financial performance. For more information, see the section titled, “Risk Factors” found on Part I, Item1A, to this Annual Report.

Human Capital Resources, Employees, and Personnel  

We believe that our future success will depend, in part, on our ability to continue to attract, hire, and retain qualified personnel. To achieve this objective, we provide competitive compensation, benefits, stock participation, and a success driven work environment.

As of December 31, 2021, we had approximately 109 employees, of which 103 were full-time and 6 were part-time employees. Eighty of our employees were domestic and twenty-nine were international. Our employees include highly skilled engineers, technicians, assemblers, and support staff. Despite recent staffing challenges that have plagued the industry that we operate in, which have generally resulted in greater turnover throughout the industry we are proud of the low turnover rate of our personnel to date, as we endeavor to continue to challenge our team and encourage input and creative thinking by all.  Our management team strives to provide transparency to our employees through regular meetings designed to update employees on current metric driven results and future expectations. None of our employees are covered by a collective bargaining agreement or represented by a labor union. We consider our relationship with our employees to be strong.

Environmental Matters

No significant pollution or other types of hazardous emission result from our operations and it is not anticipated that our operations will be materially affected by federal, state, or local provisions concerning environmental controls. Our costs of complying with environmental, health and safety requirements have not been material.

Furthermore, we do not believe that compliance with existing or pending climate change legislation, regulation, or international treaties or accords are reasonably likely to have a material effect in the foreseeable future on our business or markets that we serve, nor on our results of operations, capital expenditures, earnings, competitive position, financial position, or any of our operations. However, we will continue to monitor emerging developments in this area.

Government Approval and Effect of Government Regulations

Because our core business is to provide specialized high-performance edge computing building blocks and platforms to OEMs who incorporate these products into their complete solutions, which they sell to end users in specific vertical markets, we do not believe that any government agency approval is required for the products and services that we provide to our customers.

We believe that our operations are substantially in compliance with all applicable laws and regulations and that we hold all necessary permits to operate our business in each jurisdiction in which our facilities are located. Our worldwide business activities are subject to various laws, rules, and regulations of the United States as well as of foreign governments. Compliance with these laws, rules, and regulations has not historically had a material effect upon our capital expenditures, results of operations, or competitive position. However, governmental regulations, including but not limited to import and export law, customer, and trade regulations, are subject to change and interpretation and may affect our business in the future. For more information, see the section titled, “Risk Factors” found on Part I, Item1A, to this Annual Report.

Recent Developments

The COVID-19 pandemic continues to impact worldwide economic activity.  A public health pandemic, including COVID-19, poses the risk that we or our employees, contractors, customers, suppliers, manufacturers, distribution partners, and other partners may be prevented from conducting business activities for an indefinite period, including due to shutdowns or certain restrictions that may be requested or mandated by governmental authorities.

On February 15, 2020, Steve Cooper was terminated as President and CEO of the Company, and was replaced by David Raun, who is our current President and CEO.

On April 7, 2020, we implemented a cost reduction plan, which included the termination of certain employees and elimination of various costs. Savings from this effort were approximately $2.5 million on an annualized basis. In conjunction

20

with this reduction, we implemented a re-organization to put more focus on strategy and vision.  This included adding a separate product marketing team and implementing changes in roles, processes and decision making with the objective of generating higher return on investments, greater efficiency, margin enhancement and a more focused approach to create a leadership position in our industry.  Although we expect that it will take multiple years to fully achieve the desired impact, we believe we are seeing progress in the quality of the opportunities in our pipeline for future business.

On April 24, 2020, we completed a $6.0 million debt financing on a non-interest bearing convertible note with a 10% original issue discount. The first tranche of $3.0 million was received on April 27, 2020. Pursuant to the Securities Purchase Agreement entered into in connection with the financing we had the right to consummate additional closings of up to an additional $3.0 million starting seven months from the date of closing, subject to the prior satisfaction of certain closing conditions. This right expired on April 20, 2021, and we may no longer consummate additional closings under the Securities Purchase Agreement. The note is repayable in twenty-two equal installments, payable in cash or shares of our common stock, beginning three months after closing.

On March 1, 2021, we entered into a Securities Purchase Agreement with an accredited investor (the “Purchaser”), pursuant to which we agreed to issue and sell, in a registered direct offering, 1,497,006 shares of Company common stock to the Purchaser at an offering price of $6.68 per share. The registered direct offering was conducted pursuant to our effective shelf registration statement on Form S-3 (Registration No. 333-231513), which was initially filed with the Securities and Exchange Commission on May 15, 2019, and was declared effective on June 19, 2019. We filed the final prospectus supplement for the registered direct offering on March 3, 2021. In connection with the Securities Purchase Agreement, we also entered into a Placement Agency Agreement, pursuant to which A.G.P./Alliance Global Partners agreed to serve as lead placement agent for the registered direct offering and The Benchmark Company, LLC agreed to serve as co-placement agent for such offering. As compensation for their services, we paid to the placement agents a cash fee equal to an aggregate of 7% of the gross proceeds received by us as a result of the registered offering and reimbursed the placement agents for certain expenses incurred in connection with such offering.

During the Company’s 2021 Annual Meeting of Stockholders, which occurred on May 19, 2021, our stockholders approved by a majority of votes cast, a proposal to increase the number of shares of common stock authorized for issuance under our 2017 Equity Incentive Plan (the “2017 Plan”) from 1,500,000 shares to 3,000,000 shares of common stock of the Company pursuant to the terms and conditions of the 2017 Plan.  The amendment took effect upon receipt of stockholder approval.

Company Website

We maintain a corporate Internet website at: http://www.onestopsystems.com

The contents of our website are not incorporated in or otherwise to be regarded as part of this Annual Report. We file reports with the SEC which are available on our website free of charge. These reports include annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, “Section 16” filings on Form 3, Form 4, and Form 5, and other related filings, each of which is provided on our website as soon as reasonably practical after we electronically file such materials with or furnish them to the SEC. In addition, the SEC maintains a website (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including the Company.

21

ITEM 1A. RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the risks described below, as well as the other information in this Annual Report, including our financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” before deciding whether to invest in our common stock. The occurrence of any of the events or developments described below could harm our business, financial condition, operating results, and growth prospects. In such an event, the market price of our common stock could decline, and you may lose all or part of your investment. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operations.

Risk Factors Summary

Below is a summary of the principal factors that make an investment in our common stock speculative or risky. This summary does not address all of the risks that we face. Additional discussion of the risks summarized in this “Risk Factors Summary” section, and other risks that we face, can be found below and should be carefully considered, together with other information included in this Annual Report.

22

Risks Related to Our Business and Industry

Navigating the demand, supply, and operational challenges associated with the ongoing coronavirus (COVID-19) pandemic unsuccessfully may affect our financial condition and results of operations.

COVID-19 has spread worldwide, resulting in shutdowns and continuing interruptions of manufacturing and commerce. COVID-19 has resulted in government authorities implementing numerous measures to try to contain it, such as travel bans and restrictions, quarantines, shelter-in-place orders, and shutdowns. These measures have impacted, and may further impact, our workforce and operations, the operations of our customers and our partners, and those of our respective vendors and suppliers. Our critical business operations, including our headquarters, most of our finished goods inventory and many of our key suppliers, are located in regions which have been impacted by COVID-19. Our customers and suppliers worldwide have also been affected and may continue to be affected by COVID-19 related restrictions and closures.

The COVID-19 pandemic has increased economic and demand uncertainty.  Supply chain disruptions, resulting from factors such as the COVID-19 pandemic, labor supply and shipping container shortages, have impacted, and may continue to

23

impact, us and our customers, vendors, and suppliers. These disruptions have resulted in longer lead times and, increased product costs and shipping expenses. It is not currently possible to predict how long it will take for these supply chain disruptions to cease. In the fourth quarter of fiscal year 2021, the Company experienced protracted timelines and shortages for delivery of our products as a result of such supply chain disruptions.

The manufacture of product components, the final assembly of our products and other critical operations are concentrated in certain geographic locations that have been impacted by COVID-19, and local governments continue to take measures to try to contain the pandemic. There is considerable uncertainty regarding the impact of such measures and potential future measures, including restrictions on manufacturing facilities, on our support operations and workforce, or on our customers, partners, vendors and suppliers. Such measures, as well as restrictions or disruptions of transportation, such as reduced availability or increased cost of air transport, port closures and increased border controls or closures, could limit our capacity to meet customer demands and have a material adverse effect on our financial condition and results of operations.

The spread of COVID-19 has caused us to modify our business practices as we comply with state and federal mandated requirements for safety in the workplace to ensure the health, safety and welling-being of our employees. These measures include personal protective equipment, social distancing, cleanliness of the facilities and daily monitoring of the health of employees in our facilities, as well as modifying our policies on employee travel and the cancellation of physical participation in meetings, events, and conferences. We may take further actions as required by government authorities or that we determine are in the best interests of our employees, customers, partners and suppliers. Other than implementing and enforcing general policies to ensure our compliance with guidance issued by government agencies from time to time throughout the pandemic, we have not developed a specific and comprehensive contingency plan designed to address the challenges and risks presented by the COVID-19 pandemic and, even if and when we do develop such a plan, there can be no assurance that such plan will be effective in mitigating the potential adverse effects on our business, financial condition and results of operations.

In addition, while the extent and duration of the COVID-19 pandemic on the global economy and our business in particular is difficult to assess or predict, the pandemic has resulted in, and may continue to result in, significant disruption of global financial markets, which may reduce our ability to access capital or our customers’ ability to pay us for past or future purchases, which could negatively affect our liquidity. A recession or financial market correction resulting from the lack of containment and spread of COVID-19 could impact overall technology spending, adversely affecting demand for our products, our business and the value of our common stock.

The ultimate impact of the COVID-19 pandemic or a similar health epidemic is highly uncertain and subject to change. The extent of the impact of the COVID-19 pandemic on our operational and financial performance, including our ability to execute our business strategies and initiatives in the expected time frame, will depend on future developments, including, but not limited to, the duration and continued spread of the pandemic, its severity, the actions to contain the disease or treat its impact, further related restrictions on travel, and the duration, timing and severity of the impact on customer spending, including any recession resulting from the pandemic, all of which are uncertain and cannot be predicted. An extended period of global supply chain and economic disruption as a result of the COVID-19 pandemic could have a material negative impact on our business, results of operations, access to sources of liquidity and financial condition, though the full extent and duration is uncertain. The longer the COVID-19 pandemic persists, the greater the potential for significant adverse impact to our business operations.

The COVID-19 pandemic continues to impact our customers, which has impacted our sales and could have a material adverse effect on our financial condition and results of operations if our customers are unable to overcome their challenges.

The demand for some of our products and services has been reduced due to uncertainty and the economic impact of COVID-19.  In particular, in the media and entertainment and commercial airlines industries, demand for the use of outdoor media equipment has been impacted due to restrictions on, and reductions in, public gatherings and the airlines industry has been impacted by reduced travel and flight cancellations. While there have been certain government orders and restrictions that have lifted the prohibition of, and certain restrictions related to, public gatherings in particular cities, counties, and states as more people become vaccinated and the spread of COVID-19 starts to be contained and mitigated, until COVID-19 has been eradicated, we expect that demand for certain of our customers’ products and services will be limited, and thus, may impact our financial results and operations.

Many of our customers’ businesses have been severely impacted by the pandemic and some have been required to reduce employee headcount as a result. If a significant number of our customers are unable to continue as a going concern,

24

this would have an adverse impact on our business and financial condition. In addition, many of our customers are working remotely, which may delay the timing of new business and implementations of our services.

Business disruptions could harm our business, lead to a decline in revenues and increase our costs.

Our worldwide operations could be disrupted by earthquakes, telecommunications failures, power or water shortages, outages at cloud service providers, tsunamis, floods, hurricanes, typhoons, fires, extreme weather conditions, cyber-attacks, terrorist attacks, war or military conflicts (such as the ongoing military conflict between Russia and Ukraine), medical epidemics or pandemics (including, but not limited to, COVID-19) and other natural or man-made disasters, catastrophic events or climate change. The occurrence of any of these disruptions could harm our business and result in significant losses, a decline in revenue and an increase in our costs and expenses. Any of these business disruptions could require substantial expenditures and recovery time in order to fully resume operations. Our corporate headquarters, and a portion of our research and development activities, are located in California, and other critical business operations, finished goods inventory, and some of our suppliers are located in Europe and Asia, near major earthquake faults known for seismic activity. The manufacture of product components, the final assembly of our products and other critical operations are concentrated in certain geographic locations, including California, Germany, and China. Geopolitical change or changes in government regulations and policies in the United States or abroad may result in changing regulatory requirements, economic sanctions (such as those recently imposed by the United States and other counties on Russia), trade policies, import duties and economic disruptions that could impact our operating strategies, product demand, access to global markets, hiring, and profitability. In particular, revisions to laws or regulations or their interpretation and enforcement could result in increased taxation, trade sanctions, the imposition of import duties or tariffs, restrictions and controls on imports or exports, or other retaliatory actions, which could have an adverse effect on our business plans. For example, regulations to implement the Export Control Reform Act of 2018 could have an adverse effect on our business plans. Catastrophic events can also have an impact on third-party vendors who provide us with critical infrastructure services for IT and research and development systems and personnel. In addition, geopolitical and domestic political developments, such as existing and potential trade wars, political or social unrest, military conflicts, elections and post-election developments, and other events beyond our control, can increase levels of political and economic unpredictability globally and increase the volatility of global financial markets. Political instability or adverse political developments in or around any of the major countries in which we do business would also likely harm our business, financial condition and results of operations. Our operations could be harmed if manufacturing, logistics or other operations in these locations are disrupted for any reason, including natural disasters, high heat events or water shortages, information technology system failures, military actions or economic, business, labor, environmental, public health, regulatory or political issues. The ultimate impact on us, our third-party vendors and other suppliers and our general infrastructure of being located near major earthquake faults and being consolidated in certain geographical areas is unknown. In the event a major earthquake or other disaster or catastrophic event affects us or the third-party systems on which we rely, our business could be harmed as a result of declines in revenue, increases in expenses, substantial expenditures and time spent to fully resume operations. All of these risks and conditions could materially adversely affect our future sales and operating results.

We are currently operating in a period of economic uncertainty and capital markets disruption, which has been significantly impacted by geopolitical instability due to the ongoing military conflict between Russia and Ukraine. Our business, financial condition and results of operations could be materially adversely affected by any negative impact on the global economy and capital markets resulting from the conflict in Ukraine or any other geopolitical tensions.

U.S. and global markets are experiencing volatility and disruption following the escalation of geopolitical tensions and the start of the military conflict between Russia and Ukraine. On February 24, 2022, a full-scale military invasion of Ukraine by Russian troops was reported. Although the length and impact of the ongoing military conflict is highly unpredictable, the conflict in Ukraine could lead to market disruptions, including significant volatility in commodity prices, credit and capital markets, as well as supply chain interruptions. We are continuing to monitor the situation in Ukraine and globally and assessing its potential impact on our business.

Additionally, the recent military conflict in Ukraine has led to sanctions and other penalties being levied by the United States, European Union and other countries against Russia. Additional potential sanctions and penalties have also been proposed and/or threatened. Russian military actions and the resulting sanctions could adversely affect the global economy and financial markets and lead to instability and lack of liquidity in capital markets, potentially making it more difficult for us to obtain additional funds.

25

 Although our business has not been materially impacted by the ongoing military conflict between Russian and Ukraine to date, it is impossible to predict the extent to which our operations, or those of our suppliers and manufacturers, will be impacted in the short and long term, or the ways in which the conflict may impact our business. The extent and duration of the military action, sanctions and resulting market disruptions are impossible to predict, but could be substantial. Any such disruptions may also magnify the impact of other risks described in this Annual Report.

A reversal of the U.S. economic recovery and a return to volatile or recessionary conditions in the United States or abroad could adversely affect our business or our access to capital markets in a material manner.

Worsening economic and market conditions, downside shocks, or a return to recessionary economic conditions could severely reduce demand for our products and adversely affect our operating results. These economic conditions may also impact the financial condition of one or more of our key suppliers, which could affect our ability to secure product to meet our customers’ demand.  Our results of operations and the implementation of our business strategy could be adversely affected by general conditions in the global economy.  An economic downturn may cause uncertainty in the capital and credit markets and could have a material adverse effect on us. We could also be adversely affected by such factors as changes in foreign currency rates, weak economies, and political conditions in each of the countries in which we sell our products.

We may be adversely affected by the effects of inflation.

Inflation has the potential to adversely affect our liquidity, business, financial condition and results of operations by increasing our overall cost structure, particularly if we are unable to achieve commensurate increases in the prices we charge our customers. The existence of inflation in the economy has resulted in, and may continue to result in, higher interest rates and capital costs, shipping costs, supply shortages, increased costs of labor, weakening exchange rates and other similar effects. As a result of inflation, we have experienced and may continue to experience, cost increases. Although we may take measures to mitigate the impact of this inflation, if these measures are not effective our business, financial condition, results of operations and liquidity could be materially adversely affected. Even if such measures are effective, there could be a difference between the timing of when these beneficial actions impact our results of operations and when the cost inflation is incurred.

The market for our products is developing and may not develop as we expect.

The market for cutting-edge, high-performance computing products is characterized by rapid advances in technologies. We believe our future success will depend in large part on our ability to develop products, new business initiatives and creating innovative and custom designs for our customers. The growth of server clusters, specialized or high-performance applications, and hosted software solutions which require fast and efficient data processing, is crucial to our success. It is difficult to predict the development of the demand for high-performance computing, supercomputers, and related hardware solutions, the size and growth rate for this market, the entry of competitive products, or the success of existing competitive products. Any expansion in our market depends on several factors, including the demand, cost, performance, and perceived value associated with our products. If our products are not adopted or there is a reduction in demand for our products caused by a lack of customer acceptance, a slowdown in demand for computational power, an overabundance of unused computational power, technological challenges, competing technologies and products, decreases in corporate spending, weakening economic conditions, or otherwise, it could result in reduced customer orders, early order cancellations, the loss of customers, or decreased sales, any of which would adversely affect our business, operating results, and financial condition.

Our operating results may fluctuate significantly, which makes our future operating results difficult to predict and could cause our operating results to fall below expectations or our guidance.

Our quarterly and annual operating results have fluctuated in the past and may fluctuate significantly in the future, which makes it difficult for us to predict our future operating results. The timing and size of sales of our products are variable and difficult to predict and can result in fluctuations in our net sales from period to period. In addition, our budgeted expense levels depend in part on our expectation of future sales. Any substantial adjustment to expenses to account for lower levels of sales is difficult and takes time, thus we may not be able to reduce our costs sufficiently to compensate for a shortfall in net sales, and even a small shortfall in net sales could disproportionately and adversely affect our operating margin and operating results for a given quarter.

26

Our operating results may also fluctuate due to a variety of other factors, many of which are outside our control, including the changing and volatile local, national, and international economic environments, any of which may cause our stock price to fluctuate. Besides the other risks in this “Risk Factors” section, factors that may affect our operations include:

Each of these factors individually, or the cumulative effect of two or more of these factors, could result in large fluctuations in our quarterly and annual operating results. As a result, comparing our operating results on a period-to-period basis may not be meaningful. You should not rely on our past results as an indication of future performance.

Our products are subject to competition, including competition from the customers to whom we sell.

Servers, computer accelerators, flash storage arrays, PCIe expansion products, and other products that we design, manufacture, and sell or license are subject to competition. The computer hardware and technology fields are well established with limited, and in many cases no, intellectual property and technological barriers to entry. The markets in which we operate are competitive and we expect competition to increase in the future from established competitors and new market entrants. The markets are influenced by, among others, brand awareness and reputation, price, strength and scale of sales and marketing efforts, professional services and customer support, product features, reliability and performance, scalability of products, and breadth of product offerings. Due to the nature of our products, competition occurs at the design, performance, and sales stages. A design or sales win by us does not limit further competition and our customers may purchase competitive products from third parties at any time. This competition could result in increased pricing pressure, reduced profit margins, increased sales and marketing expenses and failure to increase, or the loss of, market share, any of which would likely seriously harm our business, operating results, or financial condition. From a cost and control perspective, our products are specialized and thus generally cost more than our competitors’ products. If our ability to design specialized solutions is deemed to be on par or of lesser value than competing solutions, we could lose our customers and prospects.

Many of our customers and competitors, often with substantially more resources or larger economies of scale, produce products that are competitive with our products. Many of these third parties mass-produce hardware solutions and have not heavily invested in or allocated resources to the smaller scale specialized products and solutions we design. A decrease in the cost of general mass-produced hardware solutions, which can serve as a substitute for our products, or the entrance of or additional allocation of resources by one of these customers or competitors into the production of specialized systems which compete with our products could create increased pricing pressure, reduced profit margins, increased sales and marketing expenses, or the loss of market share or expected market share, any of which may significantly harm our business, operating results and financial condition.

New entrants and the introduction of other distribution models in our markets may harm our competitive position.

The markets for development, distribution, and sale of our high-performance computing solutions are rapidly evolving. New entrants seeking to gain market share by introducing new technology, new products and new server configurations may make it more difficult for us to sell our products and earn design wins, which could create increased pricing pressure, reduced profit margins, increased sales and marketing expenses, or the loss of market share or expected market share, any of which may significantly harm our business, operating results and financial condition.

Large computer hardware and equipment manufacturers and suppliers have traditionally designed, produced, and sold general purpose servers, and storage arrays and related products and equipment. Our customers supplement these general-

27

purpose systems by purchasing our specialized or customized systems or supplemental products which improve the speed, efficiency, or performance of such systems. If the speed, efficiency, or computational power of such general purpose systems increases such that supplemental or specialized products become unnecessary, or the cost of such general purpose systems declines such that it is more cost effective for prospective customers to add general-purpose equipment rather than specialized or supplemental equipment, we could experience a significant decline in demand for the products which may significantly harm to our business, operating results and financial condition.

Our products compete with and supplement general purpose servers, storage systems and related equipment. If the producers of general-purpose equipment implement proprietary standards, software, interfaces, or other interoperability restrictions, including controls which restrict the equipment’s compatibility with third party systems, we could experience a significant decline in sales because our products would not be interoperable with such systems, resulting in significant harm to our business, operating results and financial condition.

In our marketplace, general-purpose equipment is traditionally mass-produced and available to order while specialized equipment and custom bulk-order equipment is subject to a bid-based purchase system. If one or more large manufacturers of general or standard server storage arrays, or related products and equipment provide specialized, customized, or supplementary equipment on a made-to-order or generally available basis, we could be forced to reduce our prices or change our selling model to remain competitive which would significantly harm to our business, operating results and financial condition.

If we are unable to manage our growth and expand our operations successfully, our business and operating results will be harmed, and our reputation may be damaged.

We have expanded our operations significantly since inception and anticipate that further significant expansion will be required to achieve our business objectives. The growth and expansion of our business and product offerings places a continuous and significant strain on our management, operational and financial resources. Any such future growth would also add complexity to and require effective coordination throughout our organization. To manage any future growth effectively, we must continue to improve and expand our information technology and financial infrastructure, our operating and administrative systems and controls, and our ability to manage headcount, capital, and processes in an efficient manner. We may not be able to successfully implement improvements to these systems and processes in a timely or efficient manner, which could result in additional operating inefficiencies and could cause our costs to increase more than planned. If we do increase our operating expenses in anticipation of the growth of our business and this growth does not meet our expectations, our operating results may be negatively impacted. If we are unable to manage future expansion, our ability to provide high quality products and services could be harmed, which could damage our reputation and brand, and may have a material adverse effect on our business, operating results and financial condition.

A limited number of customers represent a significant portion of our sales. If we were to lose any of these customers, our sales could decrease significantly.

In the years ended December 31, 2021 and 2020, approximately 36% and 24%, respectively, of net sales were attributable to two customers.  This concentration is with two customers, disguise and Raytheon. In addition, a few products comprise a significant amount of our sales, and the discontinuation, modification, or obsolescence of such products could materially and adversely affect our sales and results of operations. Any loss of, or a significant reduction in purchases by, our significant customers or a decrease in the high-performance applications that drive the use of our products, or the modification, discontinuation, or obsolescence of a device which constitutes a significant portion of our sales could have an adverse effect on our financial condition and operating results.

Some of our contracts allow our customers to have access to the design drawings for products which we have designed and manufacture for them.

Some of our contracts allow our customers to have access to the design drawings for products that we have designed and manufactured for them. In some cases, these drawings are included as a deliverable in conjunction with their non-recurring engineering fee, and in other cases, an additional fee is required to obtain the drawings package.  Since these customers have access to the drawings, there is no guarantee that they will continue to purchase the manufactured products from OSS. This arrangement applies particularly to our large media and entertainment customer. To our knowledge, our current customers have not had any of the OSS-designed products manufactured by anyone other than OSS, but they may have the capability to do so in the future.

28

We rely on a limited number of parts suppliers to support our manufacturing and design processes.

We rely on a limited number of suppliers to provide us with the necessary devices, parts and systems to allow us to build, design and manufacture our products, and the failure to manage our relationships with these parties successfully, or disruptions to our suppliers’ businesses caused by COVID-19, supply chain, and or other factors, could adversely affect our ability to market and sell our products. In the years ended December 31, 2021 and 2020, suppliers for which purchases represent greater than 10% of our total parts purchases accounted for approximately 12.6% and 18.3% of materials purchased, respectively. This concentration is with one supplier, Concisys Inc.

Although we do believe we could locate additional suppliers to fulfill our needs, any significant change in our relationship with these suppliers could have a material adverse effect on our business, operating results, and financial condition unless and until we are able to find suitable replacements. We make substantially all of our purchases from our contract suppliers on a purchase order basis. Our suppliers are not required to supply our raw materials for any specific period or in any specific quantity or price.

Global pandemics or other disasters or public health concerns in regions of the world where we have operations or source material or sell products, such as outbreaks of novel coronavirus or H1N1 flu could result in the disruption of our business. Specifically, the ongoing COVID-19 pandemic has resulted in increased travel restrictions and extended shutdowns or disruptions of certain businesses in the region. These or any governmental developments or health concerns in countries in which we operate could result in social, economic, or labor instability. Although we are monitoring the situation regularly, it is currently unknown whether the outbreak will continue to disrupt our product shipments or impact manufacturing in the region over a prolonged period. If such disruption were to extend over a prolonged period, it could have a material adverse impact on our business and our financial results. Any disruption resulting from similar events could also cause significant delays in shipments of our products until we are able to resume normalized operations, and this could have a material negative impact on our results of operations and cash flows. We do not yet know the full extent of potential delays or impacts on our business, operations, or the global economy. Currently, we are experiencing unavailability of product and limited supplies, protracted delivery dates for componentry, increasing product costs, and changes in minimum order quantities to secure product. As a result, we are carrying increased inventory balances to ensure availability of necessary products and to secure pricing. Additionally, products that are in the "work-in-process” stage and our inventory of finished goods have increased due to timing variances in the availability of certain componentry necessary to complete our products.

Our future success depends on our ability to develop and successfully introduce new and enhanced products that meet the needs of our customers.

Our sales depend on our ability to anticipate our existing and prospective customers’ needs and develop products that address those needs. Our future success will depend on our ability to design new products, anticipate technological improvements and enhancements, and to develop products that are competitive in the rapidly changing computer hardware and software industry. Introduction of new products and product enhancements will require coordination of our efforts with those of our customers, suppliers, and manufacturers to develop products that offer performance features desired by our customers and performance and functionality superior or more cost effective than solutions offered by our competitors. If we fail to coordinate these efforts, develop product enhancements, or introduce new products that meet the needs of our customers as scheduled, our operating results will be materially and adversely affected, and our business and prospects will be harmed. We cannot assure that product introductions will meet our anticipated release schedules or that our products will be competitive in the market. Furthermore, given the rapidly changing nature of the computer equipment market, there can be no assurance our products and technology will not be rendered obsolete by alternative or competing technologies.

Delays in our production cycle could result in outdated equipment or decreased purchases of our products.

The design and manufacture of our products can take several months to several years. The length of such process depends on the complexity and purpose of the system or equipment being designed, and may be affected by factors such as: the development and design of unique or specialized systems, the fabrication, availability, and supply of parts, the customization of parts as applicable, the manufacture and/or assembly of the units, quality control testing, and the development and incorporation of new technologies. If our products are outdated upon completion of this process, our sales could materially decline, and it may be necessary to sell products at a loss.

Unsuccessful government programs or OEM contracts could lead to reduced revenues.

We design and manufacture certain products to fit the specifications of government programs or OEM contracts. These programs may take months or years to complete and involve significant investment of our time, money, and resources. We

29

generally receive upfront fees for these programs but there is often no or little obligation on the part of our customer to purchase large volumes of products at the time of final product launch. Unsuccessful product launches could lead to reduced revenues and/or potential returns of products, which could have a material adverse effect on our financial condition and operating results. We may be forced to sell products at a loss or spend a significant amount of resources to find additional customers for these products if these programs do not fit the future needs of our intended customers.

Our inventory may rapidly become obsolete.

Sales cycles for some of our products can take several months or longer. In addition, it can take time from the bid to the development and manufacture of the equipment. We maintain inventory based in large part on our forecasts of the volume and timing of orders. The varying length of the sales cycles makes accurate forecasting difficult. The delays inherent in our sales cycles raise the risk that the inventory we have on hand will become obsolete or impaired prior to its use or sale. If our forecasted demand does not materialize into purchase orders, we may be required to write off our inventory balances or reduce the value of our inventory, based on a reduced sales price. A write off of the inventory, or a reduction in the inventory value due to a sales price reduction, could have an adverse effect on our financial condition and operating results.

If our products contain significant defects, we could incur significant expenses to remediate such defects, our reputation could be damaged, and we could lose market share.

Our products are complex and may contain defects or security vulnerabilities, or experience failures or unsatisfactory performance due to any number of issues in design, fabrication, packaging, materials and/or use within a system. These risks may increase as our products are introduced into new devices, markets, technologies and applications, or as new versions are released. Some errors in our products or services may only be discovered after a product or service has been shipped or used by customers or the end users of such product. Undiscovered vulnerabilities in our products or services could expose our customers or end users to hackers or other unscrupulous third parties who develop and deploy viruses, worms and other malicious software programs that could attack our products or services. Failure of our products to perform to specifications, or other product defects, could lead to substantial damage to the products we sell directly to customers, the end product in which our device has been integrated by OEMs and to the user of such end product. Any such defect may cause us to incur significant warranty, support and repair or replacement costs, write off the value of related inventory, cause us to lose market share, and divert the attention of our personnel from our product development efforts to find and correct the issue. In addition, an error or defect in new products or releases or related software drivers after commencement of commercial shipments could result in failure to achieve market acceptance or loss of design wins, harm our relationships with customers and partners and harm consumers’ perceptions of our brand. Also, we may be required to reimburse our customers, partners or consumers, including costs to repair or replace products in the field. A product recall, including a recall due to a bug in our products, or a significant number of product returns could be expensive, damage our reputation, harm our ability to attract new customers, result in the shifting of business to our competitors and result in litigation against us, such as product liability suits. If a product liability claim is brought against us, the cost of defending the claim could be significant and would divert the efforts of our technical and management personnel, and harm our business. Further, our business liability insurance may be inadequate or future coverage may be unavailable on acceptable terms, which could adversely impact our financial results.

We offer an extended product warranty to cover defective products at no cost to the customer. An unexpected change in failure rates of our products could have a material adverse impact on our business.

We offer product warranties that generally extend for one or two years from date of sale that require us to repair or replace defective products returned by the customer during the warranty period at no cost to the customer. Our product warranties are in addition to warranties we receive from our vendors. Existing and future product guarantees and warranties place us at the risk of incurring future returns and repair and/or replacement costs.

While we engage in product quality programs and processes, including monitoring and evaluating the quality of our components sourced from our suppliers, our warranty obligation is affected by actual product defect rates, parts and equipment costs and service labor costs incurred in correcting a product defect. We record an estimate for anticipated warranty-related costs based on historical and estimated future product return rates and expected repair or replacement costs. Although such costs have historically been within management’s expectations and our warranty reserves (when coupled with warranty coverage provided by our vendors) have been sufficient to cover such costs, our reserves set aside to cover warranty returns may be inadequate due to an unanticipated number of customer returns, undetected product defects, unanticipated component failures or changes in estimates for material, labor and other costs we may incur to replace projected product defects. As a result, if actual customer returns, product defect rates, parts and equipment costs or service labor costs exceed

30

our estimates, or we experience unexpected changes in failure rates, we could experience a material adverse effect on our business, financial condition and results of operations.

If we fail to achieve design wins for our products, our business will be harmed.

Achieving design wins is an important success factor for our business. We work closely with OEM’s and end users to ensure the customer gets the product they want in the specific configuration, size and weight required for the application. We have participated in many design wins based upon our ability to interpret technical specifications and proceed rapidly through prototyping, development, and delivery. This approach and expertise are two of the factors driving our growth. Failure to maintain our expertise and ability to deliver custom, specific design systems could harm our business. In order to achieve design wins, we must:

Unanticipated changes in industry standards could render our products incompatible with products developed by major hardware manufacturers and software developers. Further, if our products are not in compliance with prevailing industry standards, our customers may not incorporate our products into their design strategies.

If we cannot retain, attract, and motivate key personnel, we may be unable to effectively implement our business plan.

Our success depends in large part upon our ability to retain, attract and motivate highly skilled management, development, marketing, sales, and service personnel. The loss of and failure to replace key technical management and personnel, including David Raun, our Chief Executive Officer, and John Morrison, our Chief Financial Officer, could adversely affect multiple development efforts. We have entered into employment agreements with most of our executive officers, though they may terminate employment with us at any time, for any reason and with no advance notice. We may lose key personnel to other high technology companies or to other larger companies with significantly greater resources than us who may recruit our key personnel. The replacement of members of our senior management team or other key personnel may involve significant time and costs, and the loss of these employees could significantly delay or prevent the achievement of our business objectives.

Recruitment and retention of senior management and skilled technical, sales and other personnel is very competitive, and we may not be successful in either attracting or retaining such personnel. As part of our strategy to attract and retain key personnel, we may offer equity compensation through grants of stock options, restricted stock awards or restricted stock units. Potential employees, however, may not perceive our equity incentives as attractive enough. In addition, due to the intense competition for qualified employees, we may be required to, and have had to, increase the level of compensation paid to existing and new employees, which could materially increase our operating expenses.

We have made in the past, and may make in the future, acquisitions which could require significant management attention, disrupt our business, result in dilution to our stockholders, deplete our cash reserves and adversely affect our financial results.

Acquisitions involve numerous risks, including, without limitation, the following:

31

Acquisitions may also cause us to:

Acquisitions of high-technology companies and assets are inherently risky and subject to many factors outside of our control and no assurance can be given that our completed or future acquisitions will be successful and will not materially adversely affect our business, operating results, or financial condition. Failure to manage and successfully integrate acquisitions could materially harm our business and operating results.

The continuing commoditization of HPC hardware and software has resulted in increased pricing pressure and may adversely affect our operating results.

The continuing commoditization of HPC hardware, such as processors, interconnects, flash storage and other infrastructure, and the growing commoditization of software, including plentiful building blocks and more capable open source software, as well as the potential for integration of differentiated technology into already-commoditized components, has resulted in, and may result in increased pricing pressure that may cause us to reduce our pricing in order to remain competitive, which can negatively impact our gross margins and adversely affect our operating results.

Risks Relating to Intellectual Property

If we are unable to protect our proprietary design and intellectual property rights, our competitive position could be harmed, or we could be required to incur significant expenses to enforce our rights.

Our ability to compete effectively is dependent in part upon our ability to protect our proprietary technology. We rely on patents, trademarks, trade secret laws, confidentiality procedures and licensing arrangements to protect our intellectual property rights. There can be no assurance these protections will be available in all cases or will be adequate to prevent our competitors from copying, reverse engineering or otherwise obtaining and using our technology, proprietary rights or products. For example, the laws of certain countries in which our products are manufactured or licensed do not protect our proprietary rights to the same extent as the laws of the United States. In addition, third parties may seek to challenge, invalidate, or circumvent our patents, trademarks, copyrights and trade secrets, or applications for any of the foregoing. There can be no assurance that our competitors will not independently develop technologies that are substantially equivalent or superior to our technology or design around our proprietary rights. In each case, our ability to compete could be significantly impaired.

To prevent substantial unauthorized use of our intellectual property rights, it may be necessary to prosecute actions for infringement and/or misappropriation of our trade secrets and/or proprietary rights against third parties. Any such action could result in significant costs and diversion of our resources and management’s attention, and there can be no assurance we will be successful in such action. Furthermore, many of our current and potential competitors have the ability to dedicate substantially greater resources to enforce their intellectual property rights than we do. Accordingly, despite our efforts, we may not be able to prevent third parties from infringing upon or misappropriating our trade secrets and/or intellectual property.

32

Many of our proprietary designs are in digital form and the breach of our computer systems could result in these designs being stolen.

If our cybersecurity measures are breached or unauthorized access to private or proprietary data is otherwise obtained, our proprietary designs could be stolen. Because we hold many of these designs in digital form on our servers, there exists an inherent risk that an unauthorized third party could conduct a cybersecurity breach resulting in the theft of our proprietary information. While we have taken cybersecurity steps to protect our proprietary information, because techniques used to obtain unauthorized access or sabotage systems change frequently and generally are not identified until they are launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. Any or all of these issues could negatively impact our competitive edge and our ability to obtain new customers thereby adversely affecting our financial results.

Our proprietary designs are susceptible to reverse engineering by our competitors.

Much of the value of our proprietary rights is derived from our vast library of design specifications. While we consider our design specifications to be protected by various proprietary, trade secret and intellectual property laws, such information is susceptible to reverse engineering by our competitors. We may not be able to prevent our competitors from developing competing design specifications and the cost of enforcing these rights may be significant. If we are unable to adequately protect our proprietary designs our financial condition and operating results could suffer.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position would be harmed.

We consider trade secrets, including confidential and unpatented know-how and designs important to the maintenance of our competitive position. We protect trade secrets and confidential and unpatented know-how, in part, by customarily entering into non-disclosure and confidentiality agreements with parties who have access to such knowledge, such as our employees, outside technical and commercial collaborators, consultants, advisors and other third parties. We also enter into confidentiality and invention or patent assignment agreements with our employees and consultants that obligate them to maintain confidentiality and assign their inventions to us. Despite these efforts, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches.

Claims by others that we infringe their intellectual property or trade secret rights could harm our business.

Our industry is characterized by vigorous protection and pursuit of intellectual property rights, which has resulted in protracted and expensive litigation for many companies. Third parties may in the future assert claims of infringement of intellectual property rights against us or against our customers or channel partners for which we may be liable. As the number of products and competitors in our market increases and overlaps occur, infringement claims may increase.

Intellectual property or trade secret claims against us, and any resulting lawsuits, may result in us incurring significant expenses and could subject us to significant liability for damages and invalidate what we currently believe are our proprietary rights. Our involvement in any patent dispute or other intellectual property dispute or action to protect trade secrets and know-how could have a material adverse effect on our business. Adverse determinations in any litigation could subject us to significant liabilities to third parties, require us to seek licenses from third parties and prevent us from manufacturing and selling our products. Any of these situations could have a material adverse effect on our business. These claims, regardless of their merits or outcome, would likely be time consuming and expensive to resolve and could divert management’s time and attention.

We are generally obligated to indemnify our channel partners and end-customers for certain expenses and liabilities resulting from intellectual property infringement claims regarding our products, which could force us to incur substantial costs.

We have agreed, and expect to continue to agree, to indemnify our channel partners and end-customers for certain intellectual property infringement claims regarding our products. As a result, in the case of infringement claims against these channel partners and end-customers, we could be required to indemnify them for losses resulting from such claims or to refund amounts they have paid to us. Our channel partners and other end-customers in the future may seek indemnification from us in connection with infringement claims brought against them regarding our products. These claims, regardless of their merits or outcome, would likely be time consuming expensive to resolve, and could divert management’s time and attention from managing our business.

33

Privacy concerns relating to our products and services could damage our reputation, deter current and potential users from using our products and services, result in liability, or result in legal or regulatory proceedings.

Our products and services may provide us with access to sensitive, confidential, or personal data or information that is subject to privacy and security laws and regulations. Concerns about our practices with regard to the collection, use, retention, security or disclosure of personal information or other privacy-related matters, even if unfounded, could damage our reputation and adversely affect our operating results. The theft, loss, or misuse of personal data collected, used, stored, or transferred by us to run our business or by one of our partners could result in significantly increased security costs, damage to our reputation, regulatory proceedings, disruption of our business activities or increased costs related to defending legal claims.

Worldwide regulatory authorities are considering and have approved various legislative proposals concerning data protection, which continue to evolve and apply to our business. For example, the European Union adopted the General Data Protection Regulation (“GDPR”), which took effect in May 2018 and requires companies to meet requirements regarding the handling of personal data, including its use, protection, and the ability of persons whose data is stored to correct or delete such data about themselves. Failure to meet GDPR requirements could result in penalties of up to 4% of worldwide revenue. In addition, the interpretation and application of consumer and data protection laws in the United States, Europe and elsewhere are often uncertain and fluid, and may be interpreted and applied in a manner that is inconsistent with our data practices. If so, we may be ordered to change our data practices and/or be fined.

In addition, California enacted the California Consumer Privacy Act (“CCPA”), which took effect on January 1, 2020.  The CCPA gives California residents expanded rights to access and delete their personal information, opt out of certain personal information sharing, and receive detailed information about how their personal information is used. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. The CCPA may increase our compliance costs and potential liability. Some observers have noted that the CCPA could mark the beginning of a trend toward more stringent state privacy, data protection, and data security legislation in the U.S., which could increase our potential liability and adversely affect our business. The CCPA will be expanded substantially on January 1, 2023, when the California Privacy Rights Act of 2020 (“CPRA”) becomes fully operative. The CPRA will, among other things, give California residents the ability to limit use of certain sensitive personal information, further restrict the use of cross-contextual advertising, establish restrictions on the retention of personal information, expand the types of data breaches subject to the CCPA’s private right of action, provide for increased penalties for CPRA violations concerning California residents under the age of 16, and establish a new California Privacy Protection Agency to implement and enforce the new law.

Complying with these changing laws has caused, and could continue to cause, us to incur substantial costs, which could have an adverse effect on our business and results of operations. Further, failure to comply with existing or new rules may result in significant penalties or orders to stop the alleged noncompliant activity.

Risks Related to Our International Operations

Our international sales and operations subject us to additional risks that can adversely affect our operating results and financial condition.

Our international operations subject us to a variety of risks and challenges, including, without limitation, exposure to fluctuations in foreign currency exchange rates, increased management, travel, infrastructure and legal compliance costs associated with having international operations; reliance on channel partners; increased financial accounting and reporting burdens and complexities; compliance with foreign laws and regulations, which are subject to change; compliance with U.S. laws and regulations for foreign operations; conflicts between U.S. laws and regulations and foreign laws and regulations; import and export licensing requirements; and reduced protection for intellectual property rights in some countries and practical difficulties of enforcing rights abroad. In addition, political and economic changes, including international conflicts (such as the ongoing conflict between Russia and Ukraine) and terrorist acts, throughout the world may interfere with our, our suppliers’ and/or our customers’ activities in particular locations and result in a material adverse effect on our business, financial condition, and operating results. Any of these risks could adversely affect our international operations, reduce our international sales or increase our operating costs, adversely affecting our business, operating results and financial condition and growth prospects.

34

We are subject to governmental export and import controls that could impair our ability to compete in international markets due to licensing requirements and subject us to liability if we are not in compliance with applicable laws.

Our products are subject to export control and import laws and regulations, including the U.S. Export Administration Regulations, U.S. Customs regulations and various economic and trade sanctions regulations administered by the U.S. Treasury Department’s Office of Foreign Assets Controls. Exports of our products must be made in compliance with these laws and regulations. If we violate these laws and regulations, we and certain of our employees, could be subject to substantial civil or criminal penalties, including the possible loss of export or import privileges, fines, which may be imposed on us and responsible employees or managers and, in extreme cases, the incarceration of responsible employees or managers. In addition, if our channel partners, agents, or consultants fail to obtain appropriate import, export or re-export licenses or authorizations, we may also be adversely affected through reputational harm and penalties. Obtaining the necessary authorizations, including any required license, for a particular sale may be time-consuming, is not guaranteed and may result in the delay or loss of sales opportunities. Changes in our products or changes in applicable export or import laws and regulations may also create delays in the introduction and sale of our products in international markets, prevent our end-customers with international operations from deploying our products or, in some cases, prevent the export or import of our products to certain countries, governments or persons altogether. Any change in export or import laws and regulations, shift in the enforcement or scope of existing laws and regulations, or change in the countries, governments, persons or technologies targeted by such laws and regulations, could also result in decreased use of our products, or in our decreased ability to export or sell our products to existing or potential end-customers with international operations. Any decreased use of our products or limitation on our ability to export or sell our products would likely adversely affect our business, financial condition and operating results.

New regulations or standards or changes in existing regulations or standards in the United States or internationally related to our suppliers’ products may result in unanticipated costs or liabilities, which could have a material adverse effect on our business, operating results and future sales, and could place additional burdens on the operations of our business.

Our suppliers’ products are subject to governmental regulations in many jurisdictions. To achieve and maintain market acceptance, our suppliers’ products must continue to comply with these regulations and many industry standards. As these regulations and standards evolve, and if new regulations or standards are implemented, our suppliers may have to modify their products. The failure of their products to comply, or delays in compliance, with the existing and evolving industry regulations and standards could prevent or delay introduction of our products, which could harm our business. Supplier uncertainty regarding future policies may also affect demand for HPC products, including our products. Moreover, channel partners or customers may require us, or we may otherwise deem it necessary or advisable, to alter our products to address actual or anticipated changes in the regulatory environment. Our inability to alter our products to address these requirements and any regulatory changes may have a material adverse effect on our business, operating results and financial condition.

We could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act and similar worldwide anti-bribery laws.

The U.S. Foreign Corrupt Practices Act and similar anti-bribery laws generally prohibit companies and their intermediaries from making improper payments to foreign government officials for the purpose of obtaining or retaining business. Practices in the local business communities of many countries outside the United States have a level of government corruption that is greater than that found in the developed world. Our policies mandate compliance with these anti-bribery laws and we have established policies and procedures designed to monitor compliance with these anti-bribery law requirements; however, we cannot assure that our policies and procedures will protect us from potential reckless or criminal acts committed by individual employees or agents. If we are found to be liable for anti-bribery law violations, we could suffer from criminal or civil penalties or other sanctions that could have a material adverse effect on our business.

Risks Related to Our Common Stock

The price of our common stock may be volatile, and you could lose all or part of your investment.

The trading price of our common stock may fluctuate substantially. The trading price of our common stock will depend on several factors, including those described in this “Risk Factors” section, many of which are beyond our control and may not be related to our operating performance. These fluctuations could cause you to lose all or part of your investment in our common stock if you are unable to sell your shares at or above the price you paid.  Factors that could cause fluctuations in the trading price of our common stock include, amongst other things:

35

In addition, the stock market in general, and the market for technology companies in particular, has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of the relevant companies. Broad market and industry factors, as well as general economic, political and market conditions, such as recessions or interest rate changes, may seriously affect the market price of our common stock, regardless of our actual operating performance.

In the past, following periods of volatility in the overall market and the market prices of particular companies’ securities, securities class action litigation has often been instituted against these companies. Litigation of this type, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources. Any adverse determination in any such litigation or any amounts paid to settle any such actual or threatened litigation could require that we make significant payments.

Our directors and principal stockholders own a significant percentage of our stock and will be able to exert significant control over matters subject to stockholder approval.

Our directors, executive officers and significant stockholders have substantial control over the Company and could delay or prevent a change in corporate control. Our directors, executive officers, and holders of more than 5% of our common stock, together with their affiliates, beneficially own, in the aggregate, 26.7% of our outstanding common stock, based on the number of shares outstanding as of February 28, 2022. As a result, these stockholders, acting together, would have the ability to control the outcome of matters submitted to our stockholders for approval, including the election of directors and any merger, consolidation or sale of all or substantially all of our assets. In addition, these stockholders, acting together, would have the ability to control the management and affairs of the Company. Accordingly, this concentration of ownership might adversely affect the market price of our common stock by:

36

If securities or industry analysts issue an adverse opinion regarding our stock or do not publish research or reports about our Company, our stock price and trading volume could decline.

The trading market for our common stock will depend in part on the research and reports that equity research analysts publish about us and our business. We anticipate having limited analyst coverage and we may continue to have inadequate analyst coverage in the future. Even if we obtain adequate analyst coverage, we will have no control over such analysts or the content and opinions in their reports. Securities analysts may elect not to provide research coverage of our Company and such lack of research coverage may adversely affect the market price of our common stock. The price of our common stock could also decline if one or more equity research analysts downgrade our common stock or if those analysts issue other unfavorable commentary or cease publishing reports about us or our business. If one or more equity research analysts cease coverage of our Company, we could lose visibility in the market, which in turn could cause our stock price to decline.

Substantial future sales of shares of our common stock could cause the market price of our common stock to decline.

The market price of shares of our common stock could decline as a result of substantial sales of our common stock, particularly sales by our directors, executive officers and significant stockholders, a large number of shares of our common stock becoming available for sale, or the perception in the market that holders of a large number of shares intend to sell their shares. As of February 28, 2022, we have 18,878,183 shares of our common stock outstanding.

We have the right to designate and issue shares of preferred stock. If we were to designate and/or issue additional preferred stock, it is likely to have rights, preferences and privileges that may adversely affect the common stock.

We are authorized to issue 10,000,000 shares of blank-check preferred stock, with such rights, preferences and privileges as may be determined from time to time by our board of directors. Our board of directors is empowered, without stockholder approval, to issue preferred stock in one or more series, and to fix for any series the dividend rights, dissolution or liquidation preferences, redemption prices, conversion rights, voting rights, and other rights, preferences, and privileges for the preferred stock. Currently, we do not have any series of preferred stock designated or shares of preferred stock issued and outstanding.

The issuance of shares of preferred stock, depending on the rights, preferences, and privileges attributable to the preferred stock, could reduce the voting rights and powers of the common stock and the portion of our assets allocated for distribution to common stockholders in a liquidation event, and could also result in dilution in the book value per share of the common stock. The preferred stock could also be utilized, under certain circumstances, as a method for raising additional capital or discouraging, delaying or preventing a change in control of the Company, to the detriment of the investors in the common stock offered hereby. We cannot assure that we will not, under certain circumstances, issue shares of our preferred stock.

Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us, which may be beneficial to our stockholders, more difficult and may prevent attempts by our stockholders to replace or remove our current management and limit the market price of our common stock.

Provisions in our certificate of incorporation and amended and restated bylaws may have the effect of delaying or preventing a change of control or changes in our management. Some of these provisions:

37

In addition, we are subject to the provisions of Section 203 of the Delaware General Corporation Law, which limits the ability of stockholders owning in excess of 15% of our outstanding voting stock to merge or combine with us. Furthermore, our certificate of incorporation specifies that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware will be the sole and exclusive forum for most legal actions involving actions brought against us by stockholders. We believe this provision benefits us by providing increased consistency in the application of Delaware law by chancellors particularly experienced in resolving corporate disputes, efficient administration of cases on a more expedited schedule relative to other forums and protection against the burdens of multi-forum litigation. However, the provision may have the effect of discouraging lawsuits against our directors and officers. The enforceability of similar choice of forum provisions in other companies’ certificates of incorporation has been challenged in legal proceedings, and it is possible that, in connection with any applicable action brought against us, a court could find the choice of forum provisions contained in our certificate of incorporation to be inapplicable or unenforceable in such action.

These anti-takeover provisions and other provisions in our certificate of incorporation and amended and restated bylaws make it more difficult for stockholders or potential acquirers to obtain control of our board of directors or initiate actions that are opposed by the then-current board of directors and could also delay or impede a merger, tender offer or proxy contest involving our Company. These provisions could also discourage proxy contests and make it more difficult for you and other stockholders to elect directors of your choosing or cause us to take other corporate actions you desire. Any delay or prevention of a change of control transaction or changes in our board of directors could cause the market price of our common stock to decline.

Our inability to raise additional capital on acceptable terms in the future may limit our ability to develop and commercialize new solutions and technologies and expand our operations.

If our available cash balances and anticipated cash flow from operations are insufficient to satisfy our liquidity requirements, due to lower demand for our products as a result of other risks described in this “Risk Factors” section, we may seek to raise additional capital through equity offerings, debt financings, collaborations or licensing arrangements. We may also consider raising additional capital in the future to expand our business, pursue strategic investments, take advantage of financing opportunities, or other reasons.

Additional funding may not be available to us on acceptable terms, or at all. If we raise funds by issuing equity securities, dilution to our stockholders could result. Any equity securities issued also may provide for rights, preferences, or privileges senior to those of holders of our common stock. The terms of debt securities issued or borrowings could impose significant restrictions on our operations. The incurrence of indebtedness or the issuance of certain equity securities could result in increased fixed payment obligations and could also result in restrictive covenants, such as limitations on our ability to incur additional debt or issue additional equity, limitations on our ability to acquire or license intellectual property rights, and other operating restrictions that could adversely affect our ability to conduct our business. In addition, the issuance of additional equity securities by us, or the possibility of such issuance, may cause the market price of our common stock to decline. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish some rights to our technologies or our products, or to grant licenses on terms that are not favorable to us. If we are unable to raise adequate funds, we may have to liquidate some or all of our assets, or delay or reduce the scope of our development programs. We also may have to reduce marketing; customer support or other resources devoted to our products or cease operations. Any of these actions could harm our business, operating results, and financial condition.

We have never paid, and do not expect to pay, any cash dividends to holders of our common stock for the foreseeable future.

We have never paid, and do not expect to pay, cash dividends to holders of our common stock at any time in the foreseeable future. Anyone considering investing in shares of our common stock should not rely on such investment to provide dividend income. Instead, we plan to retain any earnings to establish, maintain and expand our operations and product offerings. In addition, any future debt financing arrangement may contain terms prohibiting or limiting the amount of dividends that may be declared or paid on our stock. Accordingly, investors must rely on sales of their shares of common stock after price appreciation, which may never occur, as the only way to realize any return on their investment.

38

We are an “emerging growth company” and a “smaller reporting company,” and the reduced public company reporting and disclosure requirements applicable to emerging growth companies and smaller reporting companies may make our common stock less attractive to investors.

We qualify as an “emerging growth company,” as defined in the JOBS Act. For as long as we continue to be an emerging growth company, we may choose to take advantage of certain exemptions from various reporting requirements applicable to other public companies but not to emerging growth companies, which includes, among other things:

We could be an emerging growth company until the last day of the fiscal year following the fifth anniversary after our initial public offering (December 31, 2023), or until the earliest of (i) the last day of the fiscal year in which we have annual gross revenue of $1.07 billion or more; (ii) the date on which we have, during the previous three year period, issued more than $1.07 billion in non-convertible debt; or (iii) the date on which we are deemed to be a large accelerated filer under the federal securities laws. We will qualify as a large accelerated filer as of the first day of the first fiscal year after we have (i) more than $700 million in outstanding common equity held by our non-affiliates, and (ii) been public for at least 12 months. The value of our outstanding common equity will be measured each year on the last day of our second fiscal quarter.

In addition, we are currently a “smaller reporting company,” as defined in the Exchange Act, and have elected to take advantage of certain of the scaled disclosures available to smaller reporting companies. To the extent that we continue to qualify as a “smaller reporting company” as such term is defined in Rule 12b-2 under the Exchange Act, after we cease to qualify as an emerging growth company, certain of the exemptions available to us as an “emerging growth company” may continue to be available to us as a “smaller reporting company,” including exemption from compliance with the auditor attestation requirements pursuant to the Sarbanes-Oxley Act and reduced disclosure about our executive compensation arrangements, amongst other things. We will continue to be a “smaller reporting company” until we have more than $250 million in public float (based on our common stock) measured as of the last business day of our most recently completed second fiscal quarter or, in the event we have no public float (based on our common stock), annual revenues of more than $100 million during the most recently completed fiscal year.

As a result of the foregoing, the information we provide may be different than the information that is available with respect to other public companies. We cannot predict if investors will find our common stock less attractive if we rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.  

ITEM 1B. UNRESOLVED STAFF COMMENTS.

Not applicable.

ITEM 2. PROPERTIES.

Our corporate headquarters are in a leased space comprising of approximately 29,342 square feet in Escondido, California under a lease that expires in August 2024. We also lease a 3,208 square foot facility in Salt Lake City, Utah that expires in June 2023, that houses our Ion software development team. Additionally, we lease a 1,632 square foot facility located in Anaheim, California, with the lease expiring in June 2023. Bressner Technology leases space comprising of 8,073 square feet on a month-to-month lease.

39

We believe our existing facilities and equipment are in good operating condition and are suitable for the conduct of our business.

ITEM 3. LEGAL PROCEEDINGS.

We are subject to litigation, claims, investigations, and audits arising from time to time in the ordinary course of our business.  See footnote No. 12 “Commitments and Contingencies” in the accompanying consolidated financial statements.

ITEM 4. MINE SAFETY DISCLOSURES.

Not Applicable.

40

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our common stock, par value $0.0001, per share is publicly traded on The Nasdaq Capital Market under the symbol “OSS”.  Below is our quarterly information with respect to the high and low sale prices for our common stock for such time periods.

Holders

As of February 28, 2022, there were 18,878,183 shares of our common stock outstanding held by approximately 60 holders of record of our common stock.  This number was derived from our stockholder records and does not include beneficial holders of our common stock whose shares are held in “street name” with various dealers, clearing agencies, banks, brokers, and other fiduciaries.

Dividend Policy

We have never declared or paid cash dividends on our common stock. We currently intend to retain all available funds and any future earnings for use in the operation of our business and do not anticipate paying any cash dividends on our common stock in the foreseeable future.  We may enter into credit agreements or other borrowing arrangements in the future that will restrict our ability to declare or pay cash dividends on our common stock. Any future determination to declare dividends will be made at the discretion of our board of directors and will depend on our financial condition, operating results, capital requirements, general business conditions and other factors that our board of directors may deem relevant.

Equity Compensation Plan Information

See Part III, Item 12, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” for information regarding securities authorized for issuance under equity compensation plans.

Unregistered Sales of Equity Securities

During the year ended December 31, 2021, there were no unregistered sales of our securities that were not reported in a Current Report on Form 8-K or our Quarterly Reports on Form 10-Q.

Issuer Repurchases of Equity Securities

None.

ITEM 6. [RESERVED].

41

ITEM 7.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

You should read the following discussion and analysis of our financial condition and operating results together with our financial statements and related notes included elsewhere in this Annual Report. This discussion and analysis contain forward-looking statements based upon current beliefs, plans and expectations that involve risks, uncertainties, and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under “Risk Factors” or in other parts of this Annual Report.

Overview

One Stop Systems, Inc. (“OSS”) designs, manufactures, and markets specialized high-performance computing modules and systems, which are designed to target edge deployments.  These specialized modules and systems consist of computers and storage products that incorporate the latest state-of-the art components with our embedded proprietary software. Such modules and systems allow our customers to offer high-end computing capabilities (often integrated within their equipment) to their target markets and applications.  Edge computing is a form of computing that is done on site, near a particular data source or the user (rather than in the cloud), minimizing the need for data to be processed in a remote data center. The global increase in load on the cloud infrastructure and increase in artificial intelligence (“AI”) applications, are the primary factors driving the growth of the edge computing market.  We market our products to manufacturers of automated equipment used for media and entertainment, medical, industrial, and military applications. Our customer applications often require connection to a wide array of data sources and sensors, ultra-fast processing power, and the ability to quickly access and store large and ever-growing data sets at their physical location (rather than in the cloud). This equipment requires datacenter class performance optimized for deployment at the edge in challenging environments.   Many of these edge applications have unique requirements, including special and compact form factors ruggedized for harsh conditions, which cannot be accommodated by traditional controlled air-conditioned data centers.  We believe that we are uniquely positioned as a specialized provider to address the needs of this this market, providing custom servers, data acquisition platforms, compute accelerators, solid-state storage arrays, system I/O expansion systems, as well as edge optimized industrial and panel PCs, tablets, and handheld compute devices. Our systems also offer industry leading capabilities that occupy less physical space and require less power consumption. We deliver this high-end technology to our customers through the sale of equipment and embedded software.

One Stop Systems, Inc. was originally incorporated as a California corporation in 1999, after initially being formed as a California limited liability company in 1998. On December 14, 2017, the Company was reincorporated as a Delaware corporation in connection with its initial public offering of its securities.

During the year ended December 31, 2015, the Company formed a wholly owned subsidiary in Germany, One Stop Systems, GmbH (“OSS GmbH”). In July 2016, the Company acquired Mission Technologies Group, Inc. (“Magma”) and its operations.

On August 31, 2018, the Company acquired Concept Development Inc. (“CDI”) located in Irvine, California.  CDI specializes in the design and manufacture of custom high-performance computing systems for airborne in-flight entertainment and networking systems.  CDI has been fully integrated into the core operations of OSS as of June 1, 2020.

On October 31, 2018, OSS GmbH acquired 100% of the outstanding stock of Bressner Technology GmbH, a Germany limited liability company located near Munich, Germany (“Bressner”).  Bressner designs and manufactures standard and customized servers, panel PCs, and PCIe expansion systems.  Bressner also provides manufacturing, test, sales, and marketing services for customers throughout Europe.

Recent Developments

In March 2020, the World Health Organization declared the outbreak of Coronavirus, or COVID-19, a global pandemic and the United States federal government declared it a national emergency. The COVID-19 pandemic continues to impact worldwide economic activity. A public health pandemic, including COVID-19, poses the risk that we or our employees, contractors, customers, suppliers, manufacturers, distribution partners, and other partners may be prevented from conducting business activities for an indefinite period, including due to restriction or shutdowns that may be requested or mandated by governmental authorities.

42

Despite global efforts to slow the spread of the COVID-19 and to mitigate its effects, COVID-19 continues to impact worldwide economic activity, and the ongoing effects of the COVID-19 pandemic has adversely impacted, and may continue to adversely impact, many aspects of our business. In response to the COVID-19 pandemic, many state, local, and foreign governments have put in place restrictions to control the spread of the disease. Such restrictions, or the perception that further restrictions could occur, have resulted in business closures, work stoppages, slowdowns, delays, work-from-home policies, travel restrictions, and cancellation or postponement of events, among other effects that have impacted productivity and disrupted our operations and those of our partners, manufacturers, suppliers, contractors, and customers.  

One way that COVID-19 has directly affected our operations is that we have experienced increased pricing and/or shortages of certain parts and supplies that are necessary components to the products and services we offer to our customers, and as a result, are experiencing longer lead-times. COVID-19 has indirectly affected our operations as well. For instance, some of our customers experienced downturns or uncertainty in their own business operations and revenue, and as a result, these customers have (and may continue to) decreased or delayed their technology spending, requested pricing concessions or payment extensions, or sought to renegotiate their contracts.  

During the pandemic, as state, local, and foreign governments implemented (and may continue to implement) preventative measures to contain or mitigate the outbreak of COVID-19, the usage of our products and services fluctuated, and we cannot predict how usage levels will continue to be impacted by these preventative measures. There is no assurance that customers will continue to use our products and services, or to the same extent, as the COVID-19 pandemic begins to taper off or after it ends. As a result, it has been difficult to accurately forecast our revenues or financial results, especially given that the near and long term impact of the pandemic remains uncertain. In addition, while the potential impact and duration of the COVID-19 pandemic on the economy and our business may be difficult to assess or predict, the pandemic has resulted in, and may continue to result in, significant disruption of global financial markets, and may reduce our ability to access additional capital, which could negatively affect our liquidity in the future. Our results of operations could be materially below our forecasts as well, which could adversely affect our results of operations, disappoint analysts and investors, or cause our stock price to decline.

Furthermore, a decrease in orders in a given period could negatively affect our revenues in future periods. The COVID-19 pandemic may also have the effect of heightening many of the other risks described in the “Risk Factors” section of this Annual Report, including risks associated with our customers and supply chain. We may take further actions that alter our operations as may be required by federal, state, or local authorities from time to time, or which we determine are in our best interests. While much of our operations can be performed remotely, certain activities often require personnel to be on-site, and our ability to carry out these activities has been, and may continue to be negatively impacted if our employees or local personnel are not able to travel. In addition, for activities that may be conducted remotely, there is no guarantee that we will be as effective while working remotely because our team is dispersed and many employees and their families have been negatively affected, mentally or physically, by the COVID-19 pandemic. Decreased effectiveness and availability of our team could harm our business. In addition, we may decide to postpone or cancel planned investments in our business in response to changes in our business as a result of the spread of COVID-19, which may impact our ability to attract and retain customers and our rate of innovation, either of which could harm our business.

We do not yet know the full extent of potential delays or impacts on our business, operations, or the global economy. Although our business continued to be negatively impacted by the pandemic in 2021, our results of operations predominantly improved as compared to 2020. Currently, we are experiencing unavailability of product and limited supplies, protracted delivery dates for componentry, increasing product costs, and changes in minimum order quantities to secure product.  As a result, we are carrying increased inventory balances to ensure availability of necessary products and to secure pricing.  Additionally, products that are in the “work-in-process” stage and our inventory of finished goods have increased due to timing and availability of certain componentry necessary to complete our products.

While there have recently been vaccines developed and administered, and certain government orders and restrictions in particular cities, counties, and states have been lifted as the spread of COVID-19 starts to be contained and mitigated, we cannot predict the timing of the vaccine roll-out globally or the efficacy of such vaccines, including against variants of the virus, and we do not yet know how businesses, customers, contractors, suppliers, or our partners will operate in a post COVID-19 environment, especially if additional or supplemental governmental orders, limitations, and restrictions are reinstated. There may be additional costs or impacts to our business and operations, including when we are able to resume in-person activities, travel, and events. In addition, there is no guarantee that a future outbreak of this or any other widespread epidemics will not occur, or that the global economy will recover, either of which could harm our business.

43

On March 1, 2021, we entered into a Securities Purchase Agreement with an accredited investor, pursuant to which we issued and sold, in a registered direct offering, 1,497,006 shares of Company common stock to the purchaser at an offering price of $6.68 per share. The registered offering was conducted pursuant to our effective shelf registration statement on Form S-3 (Registration No. 333-231513), discussed above.  As compensation for their services, we paid to the placement agents a fee equal to 7.0% of the gross proceeds received by us as a result of the registered offering, and reimbursed the placement agents for certain expenses incurred in connection with such offering. The net proceeds to us from the registered offering were approximately $9.2 million, after deducting certain fees payable to the placement agents and our transaction expenses.

On May 19, 2021, our stockholders approved, by a majority of votes cast, a proposal to increase the number of shares of commons stock authorized for issuance under our 2017 Plan from 1,500,000 shares to 3,000,000 shares of common stock pursuant to the terms and conditions of the 2017 Plan.  The amendment took effect upon receipt of stockholder approval.

Components of Results of Operations

Revenue

The Company recognizes revenue under accounting standard ASC 606.  Revenue is primarily generated from the sale of computer hardware and engineering services, and, to a minimal extent, revenue is also generated from the sale of software and sales of software maintenance and support contracts.   The Company’s performance obligations are satisfied over time as work is performed or at a specific point in time. The majority of the Company’s revenue is recognized at that point in time when products ship and control is deemed to be transferred to the customer. The Company determines revenue recognition through the following steps: (1) identification of the contract with a customer; (2) identification of the performance obligations in the contract; (3) determination of the transaction price; (4) allocation of the transaction price to the performance obligations in the contract; and (5) recognition of revenue when, or as, a performance obligation is satisfied.

Cost of revenue

Cost of revenue primarily consists of costs of materials, costs paid to third-party contract manufacturers (which may include the costs of components), and personnel costs associated with manufacturing and support operations. Personnel costs consist of wages, bonuses, benefits, stock-based compensation expenses. Cost of revenue also includes freight, allocated overhead costs and inventory write-offs and changes to our inventory and warranty reserves. Allocated overhead costs consist of certain facilities and utility costs. We expect cost of revenue to increase in absolute dollars with an improvement in margin, as product revenue increases.

Operating expenses

Our operating expenses consist of general and administrative, sales and marketing and research and development expenses. Salaries and personnel-related costs, benefits, and stock-based compensation expense, are the most significant components of each category of operating expenses. Operating expenses also include allocated overhead costs for facilities and utility costs.

General and Administrative - General and administrative expense consists primarily of employee compensation and related expenses for administrative functions including finance, legal, human resources, and fees for third-party professional services, as well as allocated overhead. We expect our general and administrative expense to increase in absolute dollars as we continue to invest in growing the business.

Marketing and Selling – Marketing and Selling expense consists primarily of employee compensation and related expenses, sales commissions, marketing programs, travel, and entertainment expenses as well as allocated overhead. Marketing programs consist of advertising, tradeshows, events, corporate communications, and brand-building activities. We expect marketing and selling expenses to increase in absolute dollars as we expand our sales force, increase marketing resources, and further develop sales channels.

Research and Development - Research and development expense consists primarily of employee compensation and related expenses, prototype expenses, depreciation associated with assets acquired for research and development, third-party engineering, and contractor support costs, as well as allocated overhead. We expect our research and development expenses to increase in absolute dollars as we continue to invest in new and existing products.

44

Other Income (Expense), net

Other income consists of miscellaneous income and income received for activities outside of our core business.  Other expense includes expenses for activities outside of our core business.  

Provision for Income Taxes

Provision for income taxes consists of estimated income taxes due to the United States and German governments as well as state tax authorities in jurisdictions in which we conduct business, along with the change in our deferred income tax assets and liabilities.

Results of Operations

The following tables set forth our results of operations for the years ended December 31, 2021 and 2020, respectively, presented in dollars and as a percentage of revenue.

45

Comparison of the Years Ended December 31, 2021 and 2020:

Revenue

For the year ended December 31, 2021, our total revenue increased $10,086,716, or 19.4%, as compared to the same period in 2020.  OSS saw an increase in revenue of $4,841,985, or 14.4%, as compared to the prior year in 2020.  The majority of this increase is primarily attributable to an increase in orders and shipments of product by and to our media and entertainment customers and government OEM suppliers, resulting in a change in the mix of our product sales and distribution as compared to the prior year, which was more severely impacted by the COVID-19 pandemic.  Bressner experienced an increase of $5,244,731, or 28.7%, as compared to the prior year in 2020.  This increase is primarily attributable to general economic improvements in Europe resulting from the diminishing impact of the COVID-19 pandemic in the business environment and procuring large, one-time orders.

Cost of revenue and gross profit

Cost of revenue increased $6,882,041, or 19.4%, for the year ended December 31, 2021, as compared to the prior year in 2020. The increase in cost of revenue is mainly attributable to an increase in our sales to both our media and entertainment customers, as well as product sales to OEMs engaged in government contracts.  OSS saw an increase in cost of revenue of $3,190,505, or 15.1%, as compared to the prior year period in 2020. Bressner’s cost of revenue increased $3,691,536, or 25.7%, as compared to the prior year in 2020, which increase primarily resulted from increased sales and changes in product mix.

46

The overall gross margin percentage was unchanged from the prior year, at 31.7%.  OSS’ gross margin percentage for the year ended December 31, 2021, was 36.9%, a decrease of 0.4 percentage points as compared to the prior year period in 2020 of 37.4%, which slight decrease was attributable to changes in product mix and increased material costs.  Bressner contributed gross margin at a rate of 23.1%, as compared to the same prior year period in 2020 of 21.2%, an increase of 1.9 percentage points, which was attributable to improved pricing and change in product mix.  

Operating expenses

General and administrative expense

General and administrative expense decreased $759,940, or 9.0%, for the year ended December 31, 2021, as compared to the same prior year period in 2020.  OSS experienced a decrease of $709,200, or 11.1%.  Bressner had a decrease of $50,740, or 2.4%.  The decrease in general and administrative expense is primarily attributable to our cost containment efforts and a reduction in force initially implemented in April 2020. Overall, total general and administrative expense decreased as a percentage of revenue to 12.4% for the year ended December 31, 2021, as compared to 16.2% during the same period in 2020.

Marketing and selling expense

Marketing and selling expense increased $2,080,450, or 50.5%, for the year ended December 31, 2021, as compared to the same prior year period in 2020.  OSS had an increase of $2,056,333, or 71.2%, which was mainly attributable to the addition of personnel for the product marketing and project management team to drive market studies and customer feedback, product strategy, new product implementation, and to analyze incoming orders for pricing and costing to optimize gross margins.  Bressner had an increase of $24,117, or 2.0%, primarily resulting from the addition of new marketing personnel and sales collateral material.  Generally, both OSS and Bressner experienced additional marketing costs due to the fact that markets began to open again after a reduction in restrictions that were imposed during the COVID-19 pandemic.  Overall, total marketing and selling expense increased as a percentage of revenue to 10.0% during the year ended December 31, 2021, as compared to 7.9% during the same period in 2020.

Research and development expense

Research and development expense decreased $287,143, or 6.6%, for the year ended December 31, 2021, as compared to the same prior year period in 2020.  OSS saw a decrease of $296,301, or 7.6%.  The decrease was largely driven by engineering resources being deployed on billable projects for which their costs are reclassified as cost of revenue or classified as work in process labor.  This reduction was offset by a modest increase of $9,158, or 2.3%, at Bressner. Overall, total research and development expense as a percentage of revenue decreased as a percentage of revenue to 6.5% during the year ended December 31, 2021, as compared to 8.3% during the same period in 2020.

Interest income

Interest income decreased $173,997 for the year ended December 31, 2021, as compared to the same prior year period in 2020.  The decrease is attributable to reduced finance charges on outstanding accounts receivable balances from our largest customer in the media and entertainment industry, which account has been brought current.

Interest expense

Interest expense decreased $23,635 for the year ended December 31, 2021, as compared to the same period in 2020 as a result of the April 2021 maturity and repayment in full of certain outstanding OSS notes and related party notes payable.  The interest and the professional fees incurred on securing debt are being amortized on an effective interest rate basis to interest expense.

Other income (expense), net

Other income (expense), for the year ended December 31, 2021, resulted in net other income of $1,474,178, as compared to net other expense of $53,612 in the same prior year period in 2020, for a net change of $1,527,790.  The most significant contribution of the change is attributable to forgiveness of the principal and interest in the amount of $1,514,354 of the Company’s PPP loan.

47

Provision (benefit) for income taxes

We have recorded an income tax provision (benefit) of $605,675 and $(603,744), respectively, for the years ended December 31, 2021 and 2020.  The effective tax rate for the years ended December 31, 2021 and 2020 differed from the statutory rate mainly due to permanent non-deductible goodwill amortization for Bressner Technology GmbH, deductions related to expenses of OSS stock options, research and development credits, forgiveness of the Paycheck Protection Program (“PPP”) loan, and changes in reserves for uncertain tax positions, as well as projecting federal, foreign and state tax liabilities for the year.  The effective tax rate for the year ended December 31, 2021, is 20.6%, as compared to 98.9% in the prior year 2020.

Liquidity and capital resources

On April 24, 2020, we sold $3,000,000 of Senior Secured Convertible Promissory Notes at a 10% original issue discount to an institutional investor through a registered direct offering which notes are scheduled to mature on April 1,2022. On April 28, 2020, we received approximately $1,500,000 of government funding under the Paycheck Protection Program, which was forgiven in full in May 2021.  On March 3, 2021, we sold and issued 1,497,006 shares of Company common stock to an accredited investor pursuant to a Securities Purchase Agreement through a registered direct offering, resulting in net proceeds of $9,188,673 to us.

Historically, our primary sources of liquidity have been provided by public and private offerings of our securities and revenues generated from our business operations.  As of December 31, 2021, we had cash and cash equivalents of $5,101,174, with short-term investments of $14,535,750, and working capital of $27,953,529.  Cash and cash equivalents held by Bressner totaled US$754,544 on December 31, 2021.  Bressner’s debt covenants do not permit the use of those funds by its parent company.

During the year ended December 31, 2021, we had income from operations of $1,747,027, with cash generated by operating activities of $5,622,596.  During the year ended December 31, 2020, we experienced a loss from operations of $424,281, with cash used in operating activities of $250,173.

Our sources of liquidity and cash flows are used to fund ongoing operations, research and development projects for new products and technologies, and provide ongoing support services for our customers. Over the next year, we anticipate that we will use our liquidity and cash flows from our operations to fund our growth. In addition, as part of our business strategy, we occasionally evaluate potential acquisitions of businesses and products and technologies. Accordingly, a portion of our available cash may be used at any time for the acquisition of complementary products or businesses. Such potential transactions may require substantial capital resources, which may require us to seek additional debt or equity financing. We cannot assure you that we will be able to successfully identify suitable acquisition candidates, complete acquisitions, successfully integrate acquired businesses into our current operations, or expand into new markets. Furthermore, we cannot provide assurances that additional financing will be available to us in any required time frame and on commercially reasonable terms, if at all.

Our revenue growth during 2020 slowed due to the effects of COVID-19, and, although it rebounded somewhat in 2021, it has not yet fully recovered due to, amongst other things, venue constraints on large group gatherings, which affected our media and entertainment business. However, through a reduction in force and strict cost containment, we have been able to mitigate the effects, to some degree, of the reduced revenue.  For a further description and risk factors associated with COVID-19, please see Part 1A of this Annual Report.

Management’s plans are to continue its efforts towards responding to the changing economic landscape by continuing to control hiring and costs, conserve cash, strengthen margins, and improve company-wide execution.

While management expects these actions to result in prospective cost containment, and our 2021 results of operations improved partially as a result of such actions, management is also committed to conserving cash and securing debt and/or equity financing as required for liquidity to meet our cash requirements through at least a period of the next twelve months. Management believes potential sources of liquidity include at least the following:

48

As a result of management’s implementation of our cost reduction plans, our potential sources of liquidity and management’s most recent cash flow forecasts, management believes that we has sufficient liquidity to satisfy our anticipated working capital requirements for our ongoing operations and obligations for at least the next twelve months. However, there can be no assurance that management’s cost reduction efforts will be effective or the forecasted cash flows will be achieved. Furthermore, we will continue to evaluate our capital expenditure needs based upon factors including but not limited to, our sales from operations, growth rate, the timing and extent of spending to support development efforts, the expansion of our sales and marketing efforts, the timing of new product introductions, and the continuing market acceptance of our products and services.

If cash generated from operations is insufficient to satisfy our capital requirements, we may open a revolving line of credit with a bank, may have to sell additional equity or debt securities, or may obtain expanded credit facilities to fund our operating expenses, pay our obligations, diversify our geographical reach, and grow the Company. In the event such financing is needed in the future, there can be no assurance that such financing will be available to us, or, if available, that it will be in amounts and on terms acceptable to us. If we cannot raise additional funds when we need or wants them, our operations and prospects could be negatively affected. However, if cash flows from operations become insufficient to continue operations at the current level, and if no additional financing were obtained, then management would consider restructuring the Company in a way to preserve its business while maintaining expenses within operating cash flows.

The following table summarizes our cash flows for the years ended December 31, 2021 and 2020:

Operating Activities

During the year ended December 31, 2021, we generated $5,622,596 in cash from operating activities, an improvement of $5,872,769 when compared to the cash used in operating activities of $250,173 during the year 2020. This improvement in operating cash flow is mainly attributable to better earnings resulting from increased sales and a reduction in working capital requirements, resulting in better collections from customers and improvement in payment terms on vendor invoices and timing of payments.

Cash generated by operating activities during the year ended December 31, 2021, is primarily a result of the improvement in profitability from a net loss of $6,544 in the prior year to net income of $2,332,773 in the current year, an improvement of $2,339,317.  Net adjustments for net non-cash items of $(146,430) are comprised of $702,873 in favorable non-cash items, which were offset by $(849,304) in items that did not generate operating cash flow and reduction in the use of operating cash for working capital of $3,379,882.

Net working capital requirements for the year ended December 31, 2021, improved $822,094, as compared to the prior year period use of working capital of $2,857,788, an improvement of $3,679,882.  The sources of working capital of $6,464,951 were attributable to changes in prepaid and other current assets, accounts payable, accrued expenses, and other liabilities for the comparable period. These sources were offset by uses of working capital of $2,785,069 being applied to changes in accounts receivables and inventory levels.

Our ability to generate cash from operations in future periods will depend in large part on our profitability, the rate and timing of collections of our accounts receivable, our inventory turns and our ability to manage other areas of working capital, including accounts payable and accrued expenses.

Investing Activities

During the year ended December 31, 2021, we used cash of $15,110,625 in investing activities, as compared to $818,794 used during the prior year period in 2020, an increase of $14,291,831. This significant increase is mainly

49

attributable to investing cash received from the registered direct offering which was completed in March 2021 and from cash balances that were not considered necessary for business operations.  

Additionally, we continue to enhance the capabilities of our ERP system and purchase development and test equipment for our engineering department.  We currently anticipate that purchases of equipment will continue at current levels and we will provide for the ongoing improvement of our ERP system functionality, which includes the integration of certain sales functions and an uplift to the most recent version of software.  

Financing Activities

Given the economic and financial hardships operating in a COVID-19 environment, we believe it is imperative to maintain opportunities for additional financial resources to ensure financial stability during trying economic times. During the year ended December 31, 2021, we generated $8,430,712 in cash from financing activities, as compared to the cash provided by financing activities of $2,109,235 during the prior year 2020.  The increase is mainly attributable to proceeds received from a $10,000,000 registered direct offering that was completed in March 2021, which resulted in net proceeds to us of $9,188,673.  We also received $401,897 from the exercise of stock options and warrants during the year ended December 31, 2021.

During the year ended December 31, 2020, we received net proceeds, after expenses, of $2,383,726 from a senior secured convertible debt offering of $3,000,000, and $1,499,360 from a PPP loan, which was subsequently forgiven in full in May 2021.

Contractual obligations and commitments

The following table sets forth our non-cancellable contractual obligations as of December 31, 2021.

We have made certain indemnities, under which we may be required to make payments to an indemnified party, in relation to certain transactions.  We indemnify our directors, officers, employees, and agents to the maximum extent permitted under the laws of the State of Delaware.  In connection with our facilities leases, we indemnify our lessors for certain claims arising from the use of our facilities.  The duration of the indemnities varies, and in many cases is indefinite.  These indemnities do not provide for any limitation of the maximum potential future payments we could be obligated to make.  Historically, we have not been obligated to make any payments for these obligations and no liabilities have been recorded for these indemnities.

Known trends or uncertainties

Although we have not seen any significant reduction in revenues to date due to consolidations, we have seen some consolidation in our industry during economic downturns. These consolidations have not had a negative effect on our total sales; however, should consolidations and downsizing in the industry continue to occur, those events could adversely impact our revenues and earnings going forward.

As discussed in this Annual Report, the world has been affected due to the COVID-19 pandemic. The pandemic has negatively impacted our business in various ways over the last two years; however, the negative impact on our results of operations in 2021 was less severe than the impact in 2020. Until the pandemic has passed, there remains uncertainty as to the effect of COVID-19 on our business in both the short and long-term.

We believe that the need for improved productivity in the research and development activities directed toward developing new products and/or software will continue to result in increasing adoption of high-performance computers and interconnect technologies in the industries that we serve. New product and/or software developments in the specialized compute business segment could result in increased revenues and earnings if they are accepted by our markets; however, there can be no assurances that new products and/or software will result in significant improvements to our revenues or earnings. For competitive reasons, we do not disclose all of our new product development activities.

50

Also, the potential for growth in new markets is uncertain. We will continue to explore these opportunities until such time as we either generate sales or determine that resources would be more efficiently used elsewhere.

Inflation

Inflation has increased during the periods covered by this Annual Report, and is expected to continue to increase for the near future. Inflationary factors, such as increases in the cost of our products (and components thereof), interest rates, overhead costs and transportation costs may adversely affect our operating results. Although we do not believe that inflation has had a material impact on our financial position or results of operations to date, we may experience some effect in the near future (especially if inflation rates continue to rise) due to supply chain constraints, consequences associated with COVID-19 and the ongoing conflict between Russia and Ukraine, employee availability and wage increases, trade tariffs imposed on certain products from China and increased product pricing due to semiconductor product shortages.

Off balance sheet arrangements

Other than lease commitments incurred in the normal course of business and certain indemnification provisions, we do not have any off-balance sheet financing arrangements or liabilities, guarantee contracts, retained or contingent interests in transferred assets, or any obligation arising out of a material variable interest in an unconsolidated entity.

We do not have any majority-owned subsidiaries that are not consolidated in the financial statements. Additionally, we do not have an interest in, or relationships with, any special purpose entities.

Stockholder transactions

In April 2019, certain members of our board of directors executed definitive agreements to commit funds of up to $4,000,000 as a credit facility. We initially borrowed an aggregate of $1,150,000 from members of the board of directors and an aggregate of $350,000 from other shareholders for a two-year period at an interest rate of 9.5%, which require us to make monthly principal and interest payments of $69,000 per month. In connection with these loans, we issued to the note holders warrants to purchase an aggregate of 69,766 shares of our common stock (which amount is equal to 10% of the original principal or such notes), which warrants have an exercise price of $2.15 per share.  The relative fair value of the warrants issued was $60,158.  The remaining unfunded loan commitments expired as of April 1, 2020, and the Company has not received any additional funding commitments from members of the board of directors.  These loans were fully repaid as of April 2021.

Critical accounting policies and estimates

In preparing our consolidated financial statements in conformity with U.S. generally accepted accounting principles, management must make a variety of decisions which impact the reported amounts and the related disclosures. These decisions include the selection of the appropriate accounting principles to be applied and the assumptions on which to base accounting estimates. In making these decisions, management applies its judgment based on its understanding and analysis of the relevant circumstances and our historical experience.

Our accounting policies and estimates that are most critical to the presentation of our results of operations and financial condition, and which require the greatest use of judgments and estimates by management, are designated as our critical accounting policies. See further discussion of our critical accounting policies under Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” in our Annual Report.  We periodically re-evaluate and adjust our critical accounting policies as circumstances change.

Revenue Recognition

The Company recognizes revenue in accordance with ASC 606, Revenue from Contracts with Customers, which superseded nearly all existing revenue recognition guidance under GAAP, to all contracts using the modified retrospective method. The comparative information has not been restated and continues to be reported under the accounting standards in effect for those periods.

51

The Company’s performance obligations are satisfied over time as work is performed or at a point in time. The majority of the Company’s revenue is recognized at a point in time when products ship and control is transferred to the customer. The Company determines revenue recognition through the following steps: (i) identification of the contract with a customer; (ii) identification of the performance obligations in the contract; (iii) determination of the transaction price; (iv) allocation of the transaction price to the performance obligations in the contract; and (v) recognition of revenue when, or as, a performance obligation is satisfied.

The Company’s contracts are executed through a combination of written agreements along with purchase orders with all customers including certain general terms and conditions. Generally, purchase orders entail products, quantities and prices, which define the performance obligations of each party and are approved and accepted by the Company. The Company’s contracts with customers do not include extended payment terms. Payment terms vary by contract type and type of customer and generally range from 30 to 60 days from invoice. Additionally, taxes assessed by a governmental authority that are both imposed on and concurrent with a specific revenue-producing transaction, that are collected by the Company from a customer and deposited with the relevant government authority, are excluded from revenue.

The transaction price is determined based on the consideration to which the Company will be entitled in exchange for transferring goods or services to the customer adjusted for estimated variable consideration, if any.  Variable consideration may include discounts, rights of return, refunds, and other similar obligations. The Company allocates the transaction price to each distinct product and service based on its relative standalone selling price. The standalone selling price for products primarily involves the cost to produce the deliverable plus the anticipated margin and for services is estimated based on the Company’s approved list price.

In the normal course of business, the Company does not accept product returns unless the items are defective as manufactured. The Company establishes provisions for estimated returns and warranties. In addition, the Company does not typically provide customers with the right to a refund and does not transact for noncash consideration.

Customer agreements include one vendor managed inventory program. The Company recognizes revenue under this arrangement when all of the following criteria are met: (i) the goods have been identified separately as belonging to the customer; (ii) the goods are ready for physical shipment to the customer; (iii) the Company does not have the ability to direct the goods to another customer; and (iv) the arrangement was requested by the customer and that the customer has sufficiently explained a substantial business purpose for the arrangement.  Management also considers whether the customer's custodial risks are insured and whether modifications to the Company's normal billing and credit terms were required.

Revenues on certain fixed-price contracts where we provide engineering services, prototypes and completed products are recognized based upon percentage of completion or based upon milestones delivered that are provided during the period and compared to milestone goals to be provided over the entire contract. These services require that we perform significant, extensive, and complex design, development, modification or implementation of our customers’ systems. Performance will often extend over long periods of time, and our right to receive future payment depends on our future performance in accordance with the agreement.

The percentage-of-completion methodology involves recognizing probable and reasonably estimable revenue using the percentage of services completed, on a current cumulative cost to estimated total cost basis, using a reasonably consistent profit margin over the performance period. Due to the long-term nature of these projects, developing the estimates of costs often requires significant judgment. Factors that must be considered in estimating the progress of work completed and ultimate cost of the projects include, but are not limited to, the availability of labor and labor productivity, the nature and complexity of the work to be performed and the impact of delayed performance. If changes occur in delivery, productivity or other factors used in developing the estimates of costs or revenues, we revise our cost and revenue estimates, which may result in increases or decreases in revenues and costs, and such revisions are reflected in earnings in the period in which the revision becomes known. 

The Company recognizes contract assets or unbilled receivables related to revenue recognized for services completed but not yet invoiced to the clients. Unbilled receivables are recorded as accounts receivable when the Company has an unconditional right to contract consideration. A contract liability is recognized as deferred revenue when the Company invoices clients in advance of performing the related services under the terms of a contract. Deferred revenue is recognized as revenue when the Company has satisfied the related performance obligation.

52

On certain contracts with several of the Company’s significant customers, the Company receives payments in advance of manufacturing. Advanced payments are recorded as deferred revenue until the revenue recognition criteria described above has been met.  Related billings that are in excess of revenue earned are deferred and recorded as a liability on the consolidated balance sheet until the related services are provided.

Stock-Based Compensation

We measure and recognize compensation expense for all stock-based awards granted to our employees and other service providers, including stock options granted under the 2017 Plan, 2015 and 2011 Stock Option Plans that were approved in December 2015 (the “2015 Plan”) and in December 2011 (the “2011 Plan”), respectively, based on the estimated fair value of the award. We used the Black-Scholes option pricing model to estimate the fair value of stock option awards granted under the 2017 Plan and 2015 Plan. We recognize the fair value of stock options granted under the 2017 Plan and 2015 Plan as stock-based compensation on a straight-line basis over the requisite service period. We record expense net of anticipated forfeitures and adjust the annual expense based upon actual experience.  

Compensation cost for stock awards, which include restricted stock units (“RSUs”) is measured at the fair value on the grant date and recognized as expense, net of estimated forfeitures, over the related service period. The fair value of stock awards is based on the quoted price of our common stock on the grant date less the present value of expected dividends not received during the vesting period.

Our use of the Black-Scholes option pricing model requires the input of highly subjective assumptions, including the expected term of the option, expected volatility of the price of our common stock, risk-free interest rates and the expected dividend yield of our common stock. The assumptions used in our option pricing model represent management’s best estimates. These estimates involve inherent uncertainties and the application of management’s judgment. If factors change and different assumptions are used, our stock-based compensation expense could be materially different in the future.  

These assumptions and estimates are as follows:  

We will continue to use judgment in evaluating the assumptions related to our stock-based compensation on a prospective basis. As we continue to accumulate additional data related to our common stock, we may refine our estimation process, which could materially impact our future stock-based compensation expense.

Inventory Valuation

We value our inventory at the lower of cost or its estimated net realizable value.  We use the average cost method for purposes of determining cost, which approximates the first-in, first-out method. We write down inventory for excess and obsolescence based upon a review of historical usage and assumptions about future demand, product mix and possible alternative uses. Actual demand, product mix and alternative usage may be lower than those that we project, and this

53

difference could have a material adverse effect on our gross margin if inventory write-downs beyond those initially recorded become necessary.  Alternatively, if actual demand, product mix and alternative usage are more favorable than those we estimated at the time of such a write-down, our gross margin could be favorably impacted in future periods.

Goodwill, Intangible Assets and Long-lived Assets

We evaluate our goodwill, intangible and long-lived assets for impairment when events or circumstances arise that indicate our goodwill, intangible and long-lived assets may be impaired. Indicators of impairment include, but are not limited to, a significant deterioration in overall economic conditions, a decline in our market capitalization, the loss of significant business, significant decreases in funding for our contracts, or other significant adverse changes in industry or market conditions.  Regardless, goodwill is tested for potential impairment at least annually.

Income Taxes

The determination of income tax expense requires us to make certain estimates and judgments concerning the calculation of deferred tax assets and liabilities, as well as the deductions and credits that are available to reduce taxable income. We recognize deferred tax assets and liabilities for the expected future tax consequences of events that have been included in our consolidated financial statements. Under this method, deferred tax assets and liabilities are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates for the year in which the differences are expected to reverse.

In evaluating our ability to recover deferred tax assets, we consider all available positive and negative evidence, including our past operating results, our forecast of future earnings, future taxable income, and tax planning strategies. The assumptions utilized in determining future taxable income require significant judgment. We record a valuation allowance against deferred tax assets if, based upon the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. If it becomes more likely than not that a tax asset will be used for which a reserve has been provided, we reverse the related valuation allowance. If our actual future taxable income by tax jurisdiction differs from estimates, additional allowances or reversals of reserves may be necessary.

We use a two-step approach to recognize and measure uncertain tax positions. First, the tax position must be evaluated to determine the likelihood that it will be sustained upon external examination. If the tax position is deemed more-likely-than-not to be sustained, the tax position is then assessed to determine the amount of benefit to recognize in the financial statements. The amount of the benefit that may be recognized is the largest amount that has a greater than 50% likelihood of being realized upon ultimate settlement. We reevaluate our uncertain tax positions on a quarterly basis and any changes to these positions as a result of tax audits, tax laws or other facts and circumstances could result in additional charges to operations.

Business Combinations

We utilize the acquisition method of accounting for business combinations and allocate the purchase price of an acquisition to the various tangible and intangible assets acquired and liabilities assumed based on their estimated fair values. We primarily establish fair value using the income approach based upon a discounted cash flow model. The income approach requires the use of many assumptions and estimates including future revenues and expenses, as well as discount factors and income tax rates. Other estimates include:

While we use our best estimates and assumptions as part of the purchase price allocation process to accurately value assets acquired and liabilities assumed at the business acquisition date, our estimates and assumptions are inherently uncertain and subject to refinement. As a result, during the purchase price allocation period, which is generally no longer than one year from the business acquisition date, we record adjustments to the assets acquired and liabilities assumed, with the corresponding offset to goodwill.

For changes in the valuation of intangible assets between preliminary and final purchase price allocation, the related amortization is adjusted in the period it occurs. Subsequent to the purchase price allocation period any adjustment to assets acquired or liabilities assumed is included in operating results in the period in which the adjustment is determined.  Should we issue shares of our common stock in an acquisition, we will be required to estimate the fair value of the shares issued.

54

Recent accounting pronouncements

Per the Company’s consolidated financial statements Note 2 – Significant Accounting Policies, we may be implementing a number of changes, as required by FASB.  See Note 2 for further details.

Recently implemented accounting pronouncements

Per the Company’s consolidated financial statements Note 2 – Significant Accounting Policies, we have no new pronouncements that were implemented during the year ended December 31, 2021.

Interest rate risk

Our exposure to interest rate risk is primarily associated with borrowing on revolving lines of credit denominated in both U.S. dollars and Euros.  We are exposed to the impact of interest rate changes primarily through our borrowing activities for our variable rate borrowings.

Concentration of credit risk

Financial instruments that potentially expose us to concentrations of credit risk consist principally of cash, cash equivalents and accounts receivable. We place our cash and cash equivalents with financial institutions with high credit quality. On December 31, 2021 and 2020, we had $5,101,174 and $6,316,921, respectively, of cash and cash equivalents on deposit or invested with our financial and lending institutions.  In Germany, the deposit insurance is €100,000 per bank, per customer.  Bressner has funds on deposit in both Euro and U.S. dollar denominations of €663,248 (US$754,544) with banks in excess of the insurance limits.

We provide credit to our customers in the normal course of business. We perform ongoing credit evaluations of our customers’ financial condition and limit the amount of credit extended when deemed necessary.

Foreign currency risk

We operate primarily in the United States.  Foreign sales of products and services are primarily denominated in U.S. dollars.  We also conduct business outside the United States through our foreign subsidiary in Germany, where business is largely transacted in non-U.S. dollar currencies, particularly the Euro, which is subject to fluctuations due to changes in foreign currency exchange rates.  Accordingly, we are subject to exposure from changes in the exchange rates of local currencies. Foreign currency transaction gains and losses are recorded in other income (expense), net in the consolidated statements of operations.

OSS GmbH operates as an extension of OSS’ domestic operations and acquired Bressner in October 2018.  The functional currency of OSS GmbH is the Euro. Transactions denominated in currencies other than the functional currency are remeasured to the functional currency at the average exchange rate in effect during the period.  At the end of each reporting period, monetary assets and liabilities are translated using exchange rates in effect at the balance sheet date. Non-monetary assets and liabilities are remeasured at historical exchange rates. Consequently, changes in the exchange rates of the currencies may impact the translation of the foreign subsidiaries’ statements of operations into U.S. dollars, which may in turn affect our consolidated statement of operations. The resulting foreign currency translation adjustments are recorded as a separate component of accumulated other comprehensive income in the consolidated statement of comprehensive income.

Derivative financial instruments

We may employ derivatives to manage certain currency market risks through the use of foreign exchange forward contracts. We do not use derivatives for trading or speculative purposes. Our derivatives are designated as a hedge of a forecasted transaction or of the variability of cash flows to be received or paid related to a recognized asset or liability (cash flow hedge). We hedge a portion of the exchange risk involved in anticipation of highly probable foreign currency-denominated transactions. In anticipation of these transactions, we enter into foreign exchange contracts to provide currency at a fixed rate.

55

Non-GAAP financial measures

Adjusted EBITDA

We believe that the use of adjusted earnings before interest, taxes, depreciation and amortization, or adjusted EBITDA, is helpful for an investor to assess the performance of the Company.  The Company defines adjusted EBITDA as income (loss) before interest, taxes, depreciation, amortization, acquisition expense, impairment of long-lived assets, financing costs, fair value adjustments from purchase accounting, stock-based compensation expense and expenses related to discontinued operations.

Adjusted EBITDA is not a measurement of financial performance under generally accepted accounting principles in the United States, or GAAP. Because of varying available valuation methodologies, subjective assumptions and the variety of equity instruments that can impact a company’s non-cash operating expenses, we believe that providing a non-GAAP financial measure that excludes non-cash and non-recurring expenses allows for meaningful comparisons between our core business operating results and those of other companies, as well as providing us with an important tool for financial and operational decision making and for evaluating our own core business operating results over different periods of time.

Our adjusted EBITDA measure may not provide information that is directly comparable to that provided by other companies in our industry, as other companies in our industry may calculate non-GAAP financial results differently, particularly related to non-recurring and unusual items. Our adjusted EBITDA is not a measurement of financial performance under GAAP, and should not be considered as an alternative to operating income or as an indication of operating performance or any other measure of performance derived in accordance with GAAP. We do not consider adjusted EBITDA to be a substitute for, or superior to, the information provided by GAAP financial results.

Adjusted EPS

Adjusted EPS excludes the impact of certain items and, therefore, has not been calculated in accordance with GAAP. We believe that exclusion of certain selected items assists in providing a more complete understanding of our underlying results and trends and allows for comparability with our peer company index and industry. We use this measure along with the corresponding GAAP financial measures to manage our business and to evaluate our performance compared to prior periods and the marketplace. The Company defines non-GAAP income (loss) as income or (loss) before amortization, stock-based compensation, expenses related to discontinued operations, and acquisition costs.  Adjusted EPS expresses adjusted income (loss) on a per share basis using weighted average diluted shares outstanding.

Adjusted EPS is a non-GAAP financial measure and should not be considered in isolation or as a substitute for financial information provided in accordance with GAAP. These non-GAAP financial measures may not be computed in the same manner as similarly titled measures used by other companies. We expect to continue to incur expenses similar to the adjusted income from continuing operations and adjusted EPS financial adjustments described above, and investors should not infer from our presentation of these non-GAAP financial measures that these costs are unusual, infrequent or non-recurring.

56

The following table reconciles net income (loss) to adjusted EPS and diluted earnings per share:

Free cash flow, a non-GAAP measure for reporting cash flow, is defined as cash provided by operating activities less capital expenditures for property and equipment, which includes capitalized software development costs. We believe free cash flow provides investors with an important perspective on cash available for investments and acquisitions after making capital investments required to support ongoing business operations and long-term value creation.  We believe that trends in our free cash flow can be valuable indicators of our operating performance and liquidity.

Free cash flow is a non-GAAP financial measure and should not be considered in isolation or as a substitute for financial information provided in accordance with GAAP. This non-GAAP financial measure may not be computed in the same manner as similarly titled measures used by other companies.

We expect to continue to incur expenditures similar to the free cash flow adjustments described above, and investors should not infer from our presentation of this non-GAAP financial measure that these expenditures reflect all of our obligations which require cash.  The following table reconciles cash provided by operating activities, the most directly comparable GAAP financial measure, to free cash flow:

57

ITEM 7A.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Not Applicable.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

See the financial statements included elsewhere in this Annual Report beginning at page F-1, which are incorporated herein by reference.

ITEM 9.  CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

ITEM 9A. CONTROLS AND PROCEDURES.

Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our periodic and current reports that we file with the SEC is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable and not absolute assurance of achieving the desired control objectives. In reaching a reasonable level of assurance, management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. In addition, the design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, control may become inadequate because of changes in conditions, or the degree of compliance with policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

Our management, with the participation of our principal executive officer and principal financial officer, has evaluated the effectiveness of our disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, or the Exchange Act, as of the end of the period covered by this Annual Report. Based on such evaluation, our principal executive officer and principal financial officer have concluded that as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.

Management’s Annual Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal controls over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act. Internal control over financial reporting is a process designed under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with GAAP. Our internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.  Because of its inherent limitations, internal controls over financial reporting may not prevent or detect all misstatements.  Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation.  We have conducted an evaluation of the effectiveness of our internal control over financial reporting.  Based on our evaluation, management has concluded that our internal control over financial reporting was effective as of December 31, 2021.  

Attestation Report of the Independent Registered Public Accounting Firm

This Annual Report does not include an attestation report of our independent registered public accounting firm due to an exemption established by the JOBS Act for “emerging growth companies.”

58

Changes in Internal Control over Financial Reporting

There has been no material change in our internal controls over financial reporting during the year ended December 31, 2021, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Management’s goal is to continue to improve upon our internal control environment as we refine our processes and procedures to address our growing business and operations in other geographies. As we continue to evaluate and take actions to improve our internal control over financial reporting, we may determine to take additional actions to address control deficiencies or determine to modify our plan based upon changes in our internal control environment.

ITEM 9B. OTHER INFORMATION.

None.

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS.

Not applicable.

59

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

Executive Officers and Directors

The following table sets forth the names, ages, and positions of our executive officers and directors as of February 28, 2022. There are no arrangements, agreements or understandings between non-management security holders and management under which non-management security holders may directly or indirectly participate in or influence the management of our affairs. There are no arrangements or understandings between any director and any other person pursuant to which any director or executive officer was or is to be selected as a director or executive officer, as applicable. There currently are no legal proceedings, and during the past ten years there have been no legal proceedings that are material to the evaluation of the ability or integrity of any of our directors or director nominees.

Executive Officers

David Raun served as our interim chief executive officer from February 15, 2020 until June 24, 2020, when he was appointed as the Company’s president and chief executive officer.  Mr. Raun formerly served as the audit chair on the OSS board of directors and serves as a director.  Mr. Raun was with PLX Technology, Inc. (“PLX”), a company that used to be publicly traded on Nasdaq, from 2004-2014, where he eventually became president, chief executive officer and a director. In this role, he led the company to an acquisition by Avago (now Broadcom) after driving the company to large PCI Express market share, record revenues and profits.  This PCIe switch leadership position at PLX makes him very familiar with the OSS markets and the components he defined and marketed to many of OSS products.  Mr. Raun also served as chief operations officer at Home Bay Technologies (“Home Bay”), an on-line technology based real estate company in 2019.  Prior to joining Home Bay, he was the president, COO and interim chief financial officer at ASSIA, Inc. (“ASSIA”), a Silicon Valley-based SaaS providers from 2016-2018.  While there, he led a turnaround effort, driving ASSIA to record revenues and sizable operating margins.  Prior to these roles, he held multiple VP of marketing, business development, corporate development, and sales roles.  He served as chairman of the board at Kilopass, a semiconductor IP supplier, until they were acquired by Synopsys in 2019.  Mr. Raun holds a B.S. in computer and electrical engineering from University of California, Santa Barbara. Mr. Raun has more than 25 years of experience at senior management and board levels in public and private companies including over 10 M&A/fund raising events, which is a great benefit to OSS.

John W. Morrison, Jr. has served as our chief financial officer since September 1, 2017. Mr. Morrison is a CPA with more than three decades of experience in public accounting and all aspects of financial reporting and financing. From June 2014 to September 2017, he served as the chief financial and operations officer for the Carol Cole Company (“Carole Cole”). Prior to joining Carol Cole, he served as a consultant to various private companies regarding their financial and operational affairs. From January 2013 to September 2013, he served as the chief financial officer of Gen-E, an information technology and services company. Mr. Morrison also served as the executive vice president and chief financial officer for the Kelley Blue Book Company for 11 years. He began his career working 15 years for the public accounting firm PricewaterhouseCoopers (now PwC) both in the U.S. and Asia. Mr. Morrison holds a B.S. in accounting and business management and MACC in Accounting from Brigham Young University.

60

Jim Ison, has been with OSS since 2004, and currently serves as the Chief Sales and Marketing Officer.  Mr. Ison has nearly three decades of combined sales, product management and marketing management experience in leading-edge large-scale electronic systems using breakthrough technologies. His expertise covers government, communications and HPC markets with particular focus on AI applications in unique environments. Prior to joining OSS, Mr. Ison held senior sales and marketing positions for Ziatech and Rittal. During the 17 years he has served in a management role at OSS, he has led the technological evolution.  Mr. Ison holds a bachelor's degree in Aeronautical Engineering from CalPoly SLO and an MBA from University of Florida.

Board of Directors

Kenneth Potashner has served as Chairman of our board of directors since May 2019.  Mr. Potashner has extensive board experience in high growth, high technology global organizations. He served as Chairman of Newport Corporation, where he provided 18 years of service culminating in the sale of Newport in 2016 for $980 million.  Mr. Potashner served as Chairman of the board of Maxwell Technologies and directed it through a period of rapid expansion. He has also served on the board of California Micro Devices, SonicBlue Inc, and Singapore Technologies, all publicly traded companies.  Mr. Potashner is currently serving as the Executive Chairman of Generation Esports and on the board of directors of Launch Factory and Prologue Mobile.  He has also served on the board of many private companies as well, including DynaOptics, MyOffice.com, Underground Elephant, Home Bay, Lumedyne, Events.com, and several others. Several of the private companies that Mr. Potashner has had affiliations with have achieved successful exits or significant financings.  Mr. Potashner has a BSEE from Lafayette College and an MSEE from SMU, Executive certifications from Columbia and INSEAD in Lausanne, Switzerland. He also has an Advanced Professional Director certification from American Board of Directors. 

Jack Harrison has served on our board of directors since December 2016. He founded, and served as president and chief executive officer of, Aspen Integrated Technologies, a world-class development engineering and manufacturing center of advanced microelectronics, which he grew through organic reinvestment and acquisition and which had a successful exit in 2011. The companies that he has founded and/or worked for previously have been responsible for the assembly development and manufacture of microfluidic semiconductor DNA gene sequencing devices, next-gen military RF radar, missile guidance systems, miniaturization of neuro-modulation sensors and transmitters, medical implant devices, and more. Customers for such companies included major medical and technology companies, government prime contractors, NASA, DARPA, and others. Mr. Harrison is currently the president of Integrity Energy and serves as the chairman of the board of Reach Beyond, a non-profit charitable organization with which he has been affiliated for more than two decades. Mr. Harrison is an angel investor in several technology start-up companies and holds a BME degree from Wheaton College. He brings decades of experience in the microelectronics space and his business and technical expertise represent important assets to OSS.

Kimberly Sentovich joined our board of directors in February 2019, and is a seasoned merchandising, operations, IT, and supply chain executive with three decades of experience with multi-billion-dollar profit and loss responsibility. Ms. Sentovich currently serves as the CEO of Rachio, a smart irrigation controller IoT device B-corp company focused on water efficiency. Before joining Rachio, she consulted for venture and private equity companies. Ms. Sentovich served in senior operations roles at Torrid and was Executive Vice President of Stores and Logistics at Gymboree, where she was responsible for 1,300 company-owned stores in North America from 2015-2018. Ms. Sentovich previously worked seven years (2008-2015) at Walmart, rising from Regional Vice President of Operations – California to Divisional Senior Vice President of Operations – Pacific Division and fifteen years at The Home Depot (1993-2008), rising to the level of Regional Vice President of Operations. Ms. Sentovich obtained her MBA from The Paul Merage School of Business, University of California, Irvine, and her B.A. in Philosophy and Political Science with a Minor in Economics from Bryn Mawr College. Ms. Sentovich’s extensive executive and operations experience, as well as her independence, judgment, and exceptional leadership experience, make her a valuable addition to our board.

Sita Lowman joined our board of directors in July 2020, and is a Fortune 500 executive with business transformation and technology expertise. Her expertise identifying market trends, organizing multi-national diverse teams to quickly react to these trends, and leveraging partnerships to expand globally make her frequently called upon to lead new business ventures and to turn around struggling businesses. From 2017 to 2021, Ms. Lowman served as Vice President and General Manager for the Platform Services business of DXC Technologies, a multi-billion-dollar IT services Fortune 500 Company. At DXC, she actively engaged in strategic partnerships with the world’s largest public cloud providers and Enterprise application providers, with responsibilities including P&L financial management, GTM and operations activities. Prior to that, Ms. Lowman served as Senior Director, Enterprise Solutions on Demand Service Offering Management, Workload and Cloud for Hewlett Packard Enterprise. She has also held General Manager roles at Nortel Networks and Texas Instruments (TI)

61

Defense Group (acquired by Raytheon).  Sita is currently a mentor to several startups and is an advisor with the start-up community through her involvement with San Diego based Launch Factory, UC San Diego Rady School of Management, and USD Knauss School of Business.  Ms. Lowman holds a BSS of Electrical Engineering from Auburn University. Ms. Lowman’s extensive Fortune 500 P&L and GTM experience in the Technology sector servicing defense, automotive and other large commercial industries make her well suited to serve on our board.

Gioia Messinger, joined our board of directors in July 2020. She brings more than three decades of high technology executive experience, with over two decades focused on consumer electronics, IoT, robotics/ AI and digital health serving as Founder/CEO, board member, interim executive and venture capital advisor.  Ms. Messinger founded, and since 2012 has served as Principal of, LinkedObjects, Inc., a strategic advisory services business focused on digital transformation brought about by AI and IoT. In addition to founding and leading several start-ups, Ms. Messinger also founded and served as CEO of Avaak, Inc., now Arlo Technologies (NYSE: ARLO), that created Arlo, the award-winning smart video security system for the home that defined the category and is now the market leader. She currently is an advisor to several start-ups, serves on the board of directors of Indyme Solutions, a provider of IoT and AI solutions for the world’s largest retailers and CARI Health, a Connected Health company.  She serves on the Dean’s Council of Advisors for the Jacobs School of Engineering at UC San Diego. Previously, Ms. Messinger served on the board of Vicon Industries (NYSE: VCON).  Ms. Messinger obtained her MBA from the Paul Merage School of Business at the University of California, Irvine and her B.S. in Computer Engineering from University of California, San Diego.  She’s an inventor on 11 patents. Ms. Messinger’s technical skills and understanding, thought leadership and industry relationships make her an invaluable addition to our board.

Greg Matz, CPA, joined our board of directors in July 2020, and is an experienced financial executive, having served in controller, Vice President and CFO roles for over two decades. Now retired, Mr. Matz is currently serving as a member of the board of directors and audit committee chair for Dare Bioscience, Inc. (NASDAQ: DARE), a public clinical-stage biopharmaceutical company. Mr. Matz also chairs the Dean’s Council for the University of San Francisco’s School of Management. From 2011 to 2016, he worked for The Cooper Companies, Inc. (NYSE: COO), holding roles as the Senior Vice President and Chief Financial Officer and Chief Risk Officer. From 2010 to 2011, Mr. Matz was the Chief Financial Officer for CooperVision, a business unit of The Cooper Companies, Inc. Prior to joining The Cooper Companies, Inc., he held key management roles in finance and marketing at Agilent Technologies and Hewlett Packard. He began his career at KPMG and is a CPA with an active certification. Mr. Matz graduated from the University of San Francisco with a B.S. in Business Administration and completed the University of Pennsylvania, The Wharton School’s Advanced Management Program. Mr. Matz is also a National Association of Corporate Directors (“NACD”) Board Leadership Fellow and has earned the NACD Directorship Certification credential.  Our board of directors believes Mr. Matz’s experience as a chief financial officer and chief risk officer of a public company and his corporate experience in financial functions, risk management, capital markets and corporate strategy qualify him to serve as a member of our board of directors.

Board Composition and Election of Directors

Director Independence

Our board of directors currently consists of seven members. Our board of directors has determined that Kenneth Potashner, Jack Harrison, Kim Sentovich, Sita Lowman, Gioia Messinger and Greg Matz are all independent directors in accordance with the listing requirements of The Nasdaq Capital Market. The Nasdaq independence definition includes a series of objective tests, including that the director is not, and has not been for at least three years, one of our employees, and that neither the director nor any of his or her family members have engaged in various types of business dealings with us. In addition, as required by Nasdaq rules, our board of directors has made a subjective determination as to each independent director that no relationships exist, which, in the opinion of our board of directors, would interfere with the exercise of independent judgment in carrying out the responsibilities of a director. In making these determinations, our board of directors reviewed and discussed information provided by the directors and us with regard to each director’s business and personal activities and relationships as they may relate to us and our management.  

Board Committees and Independence

Our board of directors has established three standing committees – audit and risk, compensation and nominating and corporate governance – each of which operates under a charter that has been approved by our board of directors. Our former risk oversight committee has now been incorporated into the audit and risk committee.

62

Audit and Risk Committee

The audit and risk committee’s main function is to oversee our accounting and financial reporting processes and the audits of our financial statements. This committee’s responsibilities include, among other things:

63

The members of our audit and risk committee are Mr. Matz, Ms. Lowman, Ms. Messinger, and Mr. Harrison. Mr. Matz serves as the chairperson of the committee. All members of our audit and risk committee meet the requirements for financial literacy under the applicable rules and regulations of the SEC and The Nasdaq Capital Market. Our board of directors has determined that Mr. Matz qualifies as an “audit committee financial expert” as defined by applicable SEC rules and has the requisite financial sophistication as defined under the applicable Nasdaq rules and regulations. Our board of directors has determined that Mr. Matz, Ms. Lowman, Ms. Messinger, and Mr. Harrison are independent under the applicable rules of the SEC and The Nasdaq Capital Market.

We are currently in compliance with Nasdaq rules and Rule 10A-3 since all members of our audit and risk committee have been deemed independent by our board of directors. The audit and risk committee operates under a written charter that satisfies the applicable standards of the SEC and The Nasdaq Capital Market. In February 2021, this committee added enterprise risk assessment and management to their charter and changed the name of the committee from the audit committee to the audit and risk committee.

Compensation Committee

Our compensation committee approves, or recommends to our board of directors, policies relating to compensation and benefits of our officers and employees. The compensation committee approves, or recommends to our board of directors, annual and long-term corporate goals and objectives relevant to the compensation of our chief executive officer and other executive officers, evaluates the performance of these officers in light of those goals and objectives and approves, or recommends to our board of directors, the compensation of these officers based on such evaluations. The compensation committee also approves, or recommends to our board of directors, the issuance of stock options and other awards under our equity incentive plans. The compensation committee will review and evaluate, at least annually, the performance of the compensation committee and its members, including compliance by the compensation committee with its charter.

The members of our compensation committee are Ms. Sentovich, Mr. Potashner, Ms. Lowman, and Ms. Messinger.  Ms. Sentovich serves as the chairperson of the committee. Our board of directors has determined that Ms. Sentovich, Mr. Potashner, Ms. Sita Lowman, and Ms. Messinger are independent under the applicable rules and regulations of The Nasdaq Capital Market and all current members qualify as a “non-employee director” as defined in Rule 16b-3 promulgated under the Exchange Act. Our board of directors has determined that each of the members of our compensation committee is an “outside director,” as that term is defined in Section 162(m) of the U.S. Internal Revenue Code of 1986, as amended, or Section 162(m).  We are currently in compliance with Nasdaq rules since all members of our compensation committee have been deemed independent by our board of directors. The compensation committee operates under a written charter, which the compensation committee will review and evaluate at least annually.

Nominating and Corporate Governance Committee

The nominating and corporate governance committee is responsible for assisting our board of directors in discharging the board of directors’ responsibilities regarding the identification of qualified candidates to become board members, the selection of nominees for election as directors at our annual meetings of stockholders (or special meetings of stockholders at which directors are to be elected), and the selection of candidates to fill any vacancies on our board of directors and any committees thereof. In addition, the nominating and corporate governance committee is responsible for overseeing our corporate governance policies, reporting and making recommendations to our board of directors concerning governance matters and oversight of the evaluation of our board of directors.  

The members of our nominating and corporate governance committee are Mr. Harrison, Mr. Potashner, Ms. Sentovich, and Mr. Matz.  Mr. Harrison serves as the chairman of the committee. Our board of directors has determined that Mr. Harrison, Mr. Potashner, Ms. Sentovich and Mr. Matz are independent under the applicable rules and regulations of The Nasdaq Capital Market relating to nominating and corporate governance committee independence.  We are currently in compliance with Nasdaq rules due to the fact that all members of our nominating and corporate governance committee have been deemed independent by our board of directors. The nominating and corporate governance committee operates under a written charter, which the nominating and corporate governance committee will review and evaluate at least annually.

Board Diversity

Our nominating and corporate governance committee is responsible for reviewing with the board of directors, on an annual basis, the appropriate characteristics, skills, and experience required for the board of directors as a whole and its individual members. In evaluating the suitability of individual candidates (both new candidates and current members), the

64

nominating and corporate governance committee, in recommending candidates for election, and the board of directors, in approving (and, in the case of vacancies, appointing) such candidates, will consider many factors, including the following:

Currently, our board of directors evaluates each individual in the context of the board of directors as a whole, with the objective of assembling a group that can best maximize the success of the business and represent stockholder interests through the exercise of sound judgment using its diversity of experience in these various areas. The board values diversity and supports having directors of diverse gender, race, and ethnicity, along with varied skills and experiences.  Information regarding the diversity of our board members is outlined in the below table:

Family Relationships

There are no family relationships between or among the directors, executive officers or persons nominated or chosen by us to become directors or executive officers.

Involvement in Certain Legal Proceedings

To the best of our knowledge, during the past ten years, none of the following occurred with respect to a present or former director, executive officer, or employee: (i) any bankruptcy petition filed by or against any business of which such person was a general partner or executive officer either at the time of the bankruptcy or within two years prior to that time; (ii) any conviction in a criminal proceeding or being subject to a pending criminal proceeding (excluding traffic violations and other minor offenses); (iii) being subject to any order, judgment or decree, not subsequently reversed, suspended or vacated, of any court of competent jurisdiction, permanently or temporarily enjoining, barring, suspending or otherwise limiting his or her involvement in any type of business, securities or banking activities; and (iv) being found by a court of competent jurisdiction (in a civil action), the SEC or the Commodities Futures Trading Commission to have violated a federal or state securities or commodities law, and the judgment has not been reversed, suspended or vacated.

65

Code of Business Conduct and Ethics

We have adopted a written code of business conduct and ethics that applies to our directors, officers, and employees, including our principal executive officer, principal financial and accounting officer, controller, or persons performing similar functions. Our code of business conduct and ethics is available under the Investors – Corporate Governance section of our website at www.onestopsystems.com. In addition, we post on our website all disclosures that are required by law or the listing standards of The Nasdaq Capital Market concerning any amendments to, or waivers from, any provision of the code. The reference to our website address does not constitute incorporation by reference of the information contained at or available through our website, and should not consider it to be a part of this Annual Report.

Section 16(a) Beneficial Ownership Reporting Compliance

Under Section 16(a) of the Exchange Act, directors, executive officers, and beneficial owners of 10% or more of our common stock, or reporting persons, are required to report to the SEC on a timely basis the initiation of their status as a reporting person and any changes with respect to their beneficial ownership of our common stock. Based solely on our review of copies of such forms that we have received, or written representations from reporting persons, we believe that during the fiscal year ended December 31, 2021, all executive officers, directors and greater than 10% stockholders complied with all applicable filing requirements, other than (i) James Ison, who filed two late reports, (ii) John Morrison, who filed one late report, and (iii) Steve Cooper, who filed one late report.  There were no known failures to file a required form.

ITEM 11. EXECUTIVE COMPENSATION.

This section discusses the material components of the executive compensation program for our executive officers who are named in the “Summary Compensation Table” below. In 2021, our “named executive officers” and their positions were as follows:

This discussion may contain forward-looking statements that are based on our current plans, considerations, expectations, and determinations regarding future compensation programs. Actual compensation programs that we adopt in the future may differ materially from the currently planned programs summarized in this discussion.

Summary Compensation Table

The following table provides information regarding the total compensation for services rendered in all capacities that was earned by each individual who served (i) as our principal executive officer at any time during 2021, and (ii) our two most highly compensated executive officers other than our principal executive officer who were serving as executive officers as of December 31, 2021.  David Raun became a named executive officer effective February 15, 2020.  Other officers were named officers for both 2021 and 2020.