Xeriant (XERI) 10-K2022 FY Annual report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended June 30, 2022

or

For the transition period from ____________ to ____________

Commission file number 000-54277

Registrant's telephone number, including area code: (561) 491-9595

Securities registered under Section 12(b) of the Act:

Securities registered under Section 12(g) of the Act:

Common Stock, $0.00001 par value

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the registrant’s common stock held by non-affiliates as of December 31, 2021, the last day of the registrant’s most recently completed second fiscal quarter, based upon the closing price of the registrant’s common stock as reported by the OTCQB Marketplace on such date, was approximately $30.4 million. Shares of common stock held by each officer and director, and by each person who owns 10% or more of the outstanding common stock, have been excluded in that such persons may be deemed to be affiliates. This calculation does not reflect a determination that persons are affiliates for any other purposes.

Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date. As of October 10, 2022, the registrant had 366,696,144 outstanding shares of common stock.

Documents Incorporated by Reference: None.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K (this “Report”) contains “forward-looking statements” within the meaning of the Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Any statements about our expectations, beliefs, plans, predictions, forecasts, objectives, assumptions, or future events or performance are not historical facts and may be forward-looking. These statements are often, but not always, made through the use of words or phrases such as “anticipate,” “believes,” “can,” “could,” “may,” “predicts,” “potential,” “should,” “will,” “estimate,” “plans,” “projects,” “continuing,” “ongoing,” “expects,” “intends,” and similar words or phrases. Accordingly, these statements are only predictions and involve estimates, known and unknown risks, assumptions, and uncertainties that could cause actual results to differ materially from those expressed in them. Our actual results could differ materially from those anticipated in such forward-looking statements as a result of several factors more fully described in Item 1A of this Report under the caption “Risk Factors” and elsewhere in this Report, including the exhibits hereto.

All forward-looking statements are necessarily only estimates of future results, and actual results may differ materially from expectations. The inclusion of this forward-looking information should not be regarded as a representation by us or any other person that the future plans, estimates, or expectations contemplated by us will be achieved. We have based these forward-looking statements largely on our current expectations and projections about future events and financial trends that we believe may affect our financial condition, results of operations, business strategy, and financial needs. You are cautioned not to place undue reliance on such statements which should be read in conjunction with the other cautionary statements that are included elsewhere in this Report. Any forward-looking statement speaks only as of the date on which it is made and we undertake no obligation to update or revise any forward-looking statement to reflect events or circumstances after the date on which the statement is made or to reflect the occurrence of unanticipated events, except as may be required under applicable securities laws.

Use of Certain Defined Terms

Except where the context otherwise requires and for the purposes of this Report only:

PART I.

Item 1. Business

Xeriant, Inc. (“Xeriant” or the “Company”) is dedicated to the acquisition, development and commercialization of (a) transformative technologies, including eco-friendly specialty materials which can be successfully deployed and integrated across multiple industry sectors, and (b) disruptive innovations related to the emerging aviation market called Advanced Air Mobility, which include next-generation aircraft. We seek to partner with and acquire strategic interests in visionary companies that accelerate this mission. Xeriant is located at the Research Park at Florida Atlantic University in Boca Raton, Florida adjacent to the Boca Raton Airport.

Corporate History

We were originally incorporated in Nevada on December 18, 2009 under the name Eastern World Solutions, Inc. The name changed to Banjo & Matilda, Inc. on September 24, 2013. Effective June 22, 2020 the Company changed its name from Banjo & Matilda, Inc. to Xeriant, Inc.

On April 16, 2019, the Company entered into a Share Exchange Agreement with American Aviation Technologies, LLC (“AAT”), an aircraft design and development company focused on the emerging segment of the aviation industry of autonomous and semi-autonomous vertical take-off and landing (VTOL) and unmanned aerial vehicles (UAVs).

On June 28, 2019, the Company spun out two wholly owned subsidiaries: Banjo & Matilda (USA), Inc. and Banjo & Matilda Australia Pty LTD.

On September 30, 2019, the acquisition of AAT closed, and AAT became a wholly owned subsidiary of the Company. On June 22, 2020, the name was changed from Banjo & Matilda, Inc. to Xeriant, Inc.

On May 31, 2021, the Company entered into a Joint Venture Agreement with XTI Aircraft Company (“XTI”) to form a new company, called Eco-Aero, LLC (the “JV”), with the purpose of completing the preliminary design of XTI’s TriFan 600, a 5-passenger plus pilot, hybrid electric, vertical takeoff, and landing (eVTOL) fixed wing aircraft. Under the Agreement, Xeriant is contributing capital, technology, and strategic business relationships, and XTI is contributing intellectual property licensing rights and know-how. XTI and the Company each own 50 percent of the JV.

Effective April 2, 2022, the Company entered into a Joint Venture with Movychem s.r.o., a Slovakian limited liability company (“Movychem”), called Ebenberg, LLC, setting forth the terms for the establishment of a joint venture (the “JV”) to develop applications and commercialize a series of flame retardant products in the form of polymer gels, powders, liquids and pellets derived from technology developed by Movychem under the name Retacell™. The JV is organized as a Florida limited liability and is owned 50% by each of the Company and Movychem.

OUR BUSINESS SUMMARY

Introduction

The Space Race fueled global competition to own the skies, and led to break-neck innovations in aerospace, technology and advanced materials. From the first manned space flight, to the first man on the Moon, aerospace has been at the leading edge of some of the most important technological, design and engineering breakthroughs that have ever impacted global industry. The commercialization of transformative aerospace technologies, including eco-friendly specialty materials, has been successfully deployed and integrated across multiple industry sectors, and has led to a more prosperous and interconnected global economy. Aerospace continues to adapt to ongoing challenges and opportunities with technology-based solutions in design, safety, efficiency, maintenance, and environmental impact. These advancements are producing next generation aircraft and specialized technology and materials creating niche products and solutions for a changing consumer-driven world that demands improved safety, durability and decreased environmental impact in every facet of their lives.

Company Overview

Advanced Materials

A primary focus of our Company is the acquisition and commercial exploitation of eco-friendly, advanced materials and chemicals which have applications across a broad range of industries and the potential to generate significant near-term revenue. The Company’s commercialization strategy encompasses licensing arrangements and joint ventures with major industry players, which would allow for more rapid access to the market with reduced capital requirements and financial risk. In addition to providing the production and distribution infrastructure, these established partnering companies can streamline testing and certification and add brand recognition value. The advanced materials and chemicals may be sold as standalone products, enhancements to existing products, or used in the development of proprietary products under a new trademarked brand owned by the Company. The Company plans to explore manufacturing and branding opportunities for specific products derived from advanced materials and chemicals acquired or developed, which would involve setting up production facilities, equipment, systems and supply chain. Our plan to source and acquire strategic interests in visionary companies developing, integrating, and commercializing critical breakthrough technologies is underway with our first successful advanced materials transaction executed in the second quarter of 2022.

Effective April 2, 2022, we entered into a Joint Venture Agreement with Movychem s.r.o, a Slovakian chemical company, setting forth the terms for a joint venture to develop applications and commercialize a series of products which incorporate an internationally patented flame-retardant technology developed by Movychem under the trade name Retacell^®. The Joint Venture, owned 50% by Xeriant and 50% by Movychem, has acquired the exclusive worldwide rights to the intellectual property related to Retacell^® and will be responsible for developing applications and commercializing products derived from Retacell^®. Engineered over two decades, Retacell^® is a versatile, biodegradable, non-toxic, high-performance thermal and fire protection chemical agent that is custom formulated for each application, based on the specific properties of the base material and the fire protection requirements. Retacell^® can be applied as a coating, treatment, or infused during manufacturing into a variety of materials, including recycled plastics and wood-based fiber. In addition to becoming heat and fire resistant, the resulting Retacell^®-enhanced materials are also water resistant.

On June 8, 2022, we announced the successful development of a multi-purpose, high-strength fire- and water-resistant composite panel made from a formulation of Retacell^® and a cardboard fiber-reinforced polymeric resin, which can be sourced from recycled materials. The panel is fabricated through a compression molding process and may be produced or cut in varying thicknesses and sizes, including standard 48” x 96” sheets. Depending on the application, the panel can have different colors, textures or decorative finishes. Potential interior and exterior construction applications include walls, ceilings, flooring, framing, siding, roofing, and decking.

On July 13, 2022, we entered into a Letter of Intent with Next New Concept, Inc. (“NNC”), an innovator in environmentally friendly, quickly constructed building systems for affordable quality housing. The Letter of Intent to purchase Xeriant’s Retacell^®-based wall panels is anticipated to generate over $100 million in revenue beginning in 2023 based on the volume of homes NNC has projected to construct. The letter of intent is non-binding and contemplates the parties will negotiate in good faith to complete a definitive agreement.

The Company is investigating the requirements for the buildout of manufacturing facilities in the United States and Eastern Europe to meet the demand for the Retacell^®-infused wallboards. We have identified potential sites, located and priced specialized manufacturing equipment, started to formulate timetables, and hired a managing director with decades of experience to oversee the advanced materials division.

Aerospace

Another area of interest for our Company is the emerging aviation market called Advanced Air Mobility (AAM), the transition to more efficient, eco-friendly, automated and convenient flight operations enabled by the convergence of technological advancements in design and engineering, composite materials, propulsion systems, battery energy density and manufacturing processes. Next-generation aircraft being developed for this market offer low-cost, on-demand flight for passengers and cargo, utilizing lower altitude airspace and bypassing the traditional hub and spoke airport network with vertical takeoff and landing (VTOL) capabilities. Many of these lightweight aircraft are electrically powered through either hybrid or pure battery systems, which allows for quieter, low emission flights over urban areas, however with limited speed and range. The adoption and integration of niche aerial services through AAM is expected to provide benefits throughout the economy. We plan to partner with and acquire strategic interests in visionary companies that accelerate our mission of commercializing critical breakthrough AAM technologies which enhance performance, increase safety, and enable and support more efficient, autonomous, and sustainable flight operations, including electric and hybrid-electric passenger and cargo transport aircraft capable of vertical takeoff and landing. Our plan to source and acquire strategic interests in leading aerospace companies developing breakthrough VTOL aircraft began in the second quarter of 2021.

Effective May 27, 2021, we entered into a joint venture with XTI Aircraft Company (“XTI”), a privately owned OEM based in Englewood, Colorado for the purpose of completing the preliminary design of XTI’s TriFan 600, a 5-passenger plus pilot, hybrid electric vertical takeoff and landing (eVTOL) fixed-wing aircraft.

Through our joint venture agreement with XTI, we were involved in the successful completion of the preliminary design of their TriFan 600 eVTOL aircraft. The TriFan 600 is being designed to become the fastest, longest-range VTOL aircraft in the world and the first commercial fixed-wing VTOL airplane, with current pre-orders exceeding $3 billion in gross revenues upon delivery of those aircraft. The joint venture is an important component in Xeriant’s plan to bolster its position in AAM.

Management believes that our holding and operating company structure has several advantages and will enable us to grow rapidly, acquiring assets primarily through acquisitions, joint ventures, strategic investments, and licensing arrangements. As a publicly traded company, we offer our subsidiaries such benefits as improved access to capital, higher valuations and lower risk through the shared ownership of a diversified portfolio, while allowing these entities to maintain independence in their distinct operations to focus on their fields of expertise. Cost savings and efficiencies may be realized from sharing non-operational functions such as finance, legal, tax, sales & marketing, human resources, purchasing power, as well as investor and public relations.

Additionally, we are leveraging our relationship with Florida Atlantic University to provide a collaborative research arm for technologies that require additional validation and the backing of a respected research institution for credibility. The university also may provide access to various grants through the SBIR (Small Business Innovation Research), STTR (Small Business Technology Transfer), NSF (National Science Foundation) and other programs, and if warranted, introductions into a number of government agencies, such as DOD (Department of Defense) and DARPA (Defense Advanced Research Projects Agency). We are pursuing strategic alliances with companies that provide complementary technologies and access to new markets.

The Company is trading on the OTCQB Venture Market under the stock symbol, XERI.

Industry Overview

Aerospace innovation has been at the forefront of many important scientific, technological, design and engineering breakthroughs which have had broad implications across non-aerospace sectors of the economy. Research and development initiatives originally intended for aerospace applications have contributed to advances in health care, transportation, telecommunications, agriculture, manufacturing and materials, and have led to the commercialization of new technologies and products that have positively impacted our daily lives.

One of the most recognized areas of research where the aerospace industry has played a major role is polymer chemistry, which includes the development of plastics technologies and fire retardants in plastics, coatings and adhesives. Technical improvements in aircraft design have shifted from a focus on speed and range to efficiency and sustainability, creating the need for advanced materials in aerostructures and engines that are lightweight and resistant to extreme heat. Plastic composites using carbon fiber are increasingly used in the structural components of aircraft, replacing aluminum. Additionally, aircraft interior design incorporates lighter, flame-resistant polymer materials and engineered alloys for panels, seats and various components to reduce weight.

Advanced polymer materials with superior performance characteristics, including flame-resistance with non-toxic gases, have wide applicability in the construction industry. Plastic composite boards may be fabricated from a range of polymers, including polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC) and polyamide (PA), which are inherently water-resistant, and reinforced with a variety of materials, including cardboard fiber, fiberglass, wood or carbon, which provide increased mechanical strength. Additives, surface treatments and decorative finishes can further enhance the properties of the boards, which can be manufactured in standard sizes and become a replacement for gypsum and wood based structural panels such as drywall, plywood, OSB and MDF, and flooring. Plastic composite boards made from recycled plastics and fiber are considered green building products, not only because they decrease the amount of waste materials from landfills, but because they have insulating properties that can cut energy costs. When infused with a non-toxic flame retardant, these eco-friendly composite panels can be an effective passive fire protection system, providing superior safety and minimizing property damage from flame spread and smoke.

The construction industry is seeing an accelerating demand for sustainable building practices, which is expected to drive the market growth of green building materials, as well as promote the use of non-toxic chemicals, including flame retardants. Green building materials are an environmentally friendly solution because they are produced from safe, recyclable products, which help in conserving non-renewable resources and mitigating environmental and human health considerations. Moreover, green building materials have become a durable and energy-efficient solution that makes them suitable for various infrastructure applications. As part of a major rebuilding of aging infrastructure across the globe, investments in renovations and retrofit construction, including the replacement of decaying underground materials, often mandate the use of green materials and building methods. New construction of governmental buildings, office complexes, schools and residential structures is increasingly employing eco-friendly alternatives for insulation, concrete, wallboard and rebar, which often have similar or superior performance when compared with conventional materials. Several developing countries are launching programs with subsidies and incentives to spur growth in the market and spread awareness about alternative construction methods with the goal of supplying affordable and sustainable housing. In the U.S., LEED (Leadership in Energy and Environmental Design) is the most widely used rating system for green building practices.

Below are some compelling statistics and forecasts in support of the development and commercialization of green building products, including non-toxic flame-retardant chemicals:

The aerospace industry continues to evolve and adapt as market conditions change and as technological innovation enables the development of aircraft with new capabilities, applications and business cases. Next-generation aircraft are more efficient, sustainable, reliable, automated and safer through technological improvements in design optimization and modeling, advanced materials, AI, alternative propulsion systems and manufacturing processes. Many of the airframe configurations enabled by these developments are being designed for the emerging aviation market called Advanced Air Mobility (AAM), the integration of new aircraft designs and flight technologies to move people and cargo between places not usually served by existing ground or air transportation. Common technologies in AAM include electric propulsion, short and vertical takeoff/landing techniques, composite materials, and the ability to remotely or autonomously pilot aircraft. In addition to being quieter with less or no carbon emissions, it is anticipated that these new aircraft will have lower operating, maintenance, and repair costs compared with other aircraft, including helicopters.

Below are some compelling statistics and forecasts in support of the development and commercialization of aerospace technologies related to Advanced Air Mobility:

The Research Park at Florida Atlantic University

In August 2019, Xeriant was approved by the Florida Atlantic Research and Development Authority to become a member and tenant of the Research Park at Florida Atlantic University (FAU) in Boca Raton, Florida, which is part of the university and adjacent to the Boca Raton Airport. FAU is one of the top engineering schools in the state, and part of the National Science Foundation’s Industry/University Cooperative Research Center Program called the Center for Advanced Knowledge Enablement (CAKE). The 70-acre Research Park, home to many technology companies and research-based organizations, is the site of Xeriant’s main office. FAU recently opened a center for Artificial Intelligence and Connected Assured Autonomy through their College of Engineering and Computer Science, which is applicable to advanced aircraft systems. The Company is engaging with FAU’s academic team, both faculty and students, to assist in screening and validating various technologies and to work together in a series of joint research initiatives. The relationship with FAU gives Xeriant credibility, since few companies are selected for membership in its research park and may provide access to grant programs and financing opportunities. Universities continue to be an indispensable source for novel discoveries in science and technology, with an impressive history of innovations that changed the world. Research parks have become the intermediaries between these academic institutions and industry, a hybrid of two diverse cultures that fosters a dynamic innovation ecosystem of technology transfer, economic development and the generation of skilled labor. Faculty members often play a direct role in furthering the commercialization of technologies by launching new companies.

Intellectual Property

Xeriant owns a 64% interest in its subsidiary, American Aviation Technologies, LLC (AAT). AAT owns a patented VTOL drone/aircraft concept called Halo. All intellectual property rights to Halo, including patents and applications for patents, were acquired on October 2, 2018. A Halo utility patent was filed on September 28, 2018, which was a continuation of U.S. Patent Application Serial No. 12/157,180, filed June 5, 2008, which claimed the benefit of and priority to U.S. Patent Application Serial No. 60/941,965, filed June 5, 2007, with both prior applications fully incorporated in their entireties and for all purposes. We received a Notice of Allowance from the U.S. Patent and Trademark Office dated June 10, 2019 on the major claims in the patent application, which indicated the agency’s intent to issue a patent. we received an additional Notice of Allowance dated June 22, 2020 covering additional Halo claims. AAT received patent US 2020/0062385 A1 on February 27, 2020 and patent US 10,814,974 B2 on October 27, 2020. Under the Joint Venture Agreement with Movychem, the Company has exclusive worldwide licensing rights to a series of international patents related to the production of Retacell^®, which is a trademarked name.

Xeriant has filed trademark applications with the U.S. Patent and Trademark office for the following marks, including names, logos and slogans: Xeriant name, Xeriant logo, “Innovation Soaring,” “Evolution in Flight,” “Evolution of Flight” and “NexBoard.” The Company is in the process of filing trademark applications for “Sustainable Aerospace” and “EcoFlite.”

Market Opportunity

Xeriant has identified emerging areas of technology with exceptional market opportunity, which is the basis for potential acquisitions, strategic partnerships or licensing arrangements. We have identified early-stage technology companies, as well as established companies that have been confined to a limited geographical area, have developed breakthrough, high-market-potential technologies, and that are past the concept/seed capital stage. Some companies are already generating revenue while others have a clear path to revenue. Many are acquisition targets or have the potential for a combination or roll-up. In some cases, their technology originated and was developed out of an academic environment. As a strategic partner or acquiror, we provide companies with access to capital, liquidity through an exchange of equity, new market opportunities and synergistic contacts, and university relationships for research and grants, while maintaining partners’ operational independence. We believe the entrepreneurial spirit, passion, and vision are critical to success, and we provide strategic guidance, access to financial markets, and investor liquidity.

We entered a 50-50 joint venture with Movychem s.r.o. for the purpose of developing and commercializing applications and specialty flame protectant products under the name Retacell^®. The number of potential applications for Retacell^® is almost unlimited, impacting a broad range of industries from transportation and construction to electronics and home furnishings, valued at over $5 Trillion. In the aerospace industry, Retacell^® is anticipated to have far reaching implications for improving safety and reducing maintenance in aircraft, with potential uses in airframe structures, cabin interiors, wiring insulation and engine components. Retacell^®’s exceptional fire protection properties have generated interest from key players in the construction industry and building materials retailers in the U.S., who are looking for more cost-effective and sustainable fire protection solutions. The global green construction materials market, estimated at $318 Billion in 2021, is projected to reach $575 Billion by 2027, based on a report by Emergen Research.

According to Grand View Research, the global building materials market related to gypsum wallboards, plywood, OSB, flooring and siding was valued at USD 838.1 billion in 2021 and is forecasted to reach USD 1.092.4 billion by 2025. The green building materials market was valued at USD 256.5 billion in 2021 and is projected at USD 350.3 billion in 2025, based on a study by Allied Market Research.

We entered a 50-50 joint venture with XTI Aircraft Company to complete the preliminary design phase in the development of the TriFan 600, a hybrid-electric fixed-wing VTOL aircraft that uses three ducted fans for vertical lift. The TriFan 600 would be the fastest and longest-range VTOL aircraft in the world, and the first commercial fixed-wing VTOL airplane. The TriFan 600 has a maximum cruise speed of 345 mph and a range of 850 miles with conventional takeoff and landing, and 700 miles when taking off and landing vertically, which is far superior to other leading eVTOL aircraft in development. In comparison, Lilium Jet, Joby Aviation’s S4, and the Archer Maker have maximum cruise speeds of 175 mph, 200 mph, and 200 mph respectively, with ranges of 150 miles, 150 miles, and 60 miles. The TriFan 600 can be configured with the standard six seats (5 passengers + pilot), nine seats for air taxi routes (8 passengers + pilot), or as an emergency medical aircraft. As a scalable platform, there is also a cargo variant called the TriFan 200 and a 12-15 seat model. XTI’s management team includes the former top executives of Aereon Supersonic, Gulfstream, Citation, Skunk Works, Textron, Cessna Aircraft, and AVX Aircraft who, combined, have developed and certified more than 40 new aircraft designs over their careers. There are over 300 presales for the TriFan 600 representing over $3 billion in future revenue.

A cross-section of Morgan Stanley Research’s equity analysts last year detailed how investment in autonomous flying aircraft is accelerating. The BluePaper described implications for the future of passenger travel, military and defense applications, and freight and package transportation, and projected a total addressable market of $1.5 trillion for autonomous aircraft by 2040.

Xeriant focuses on disruptive technology with broad applications across high value industries. Categories include a broad range of disciplines impacting areas such as advanced materials, artificial intelligence (AI), sensors, communications, navigation and defense. Target companies and technologies should have significant upside potential, unique I/P, roll up or combination potential, have a quality team in place to execute their business plan, and need funding for execution or growth, etc.

Development Strategy

Xeriant is dedicated to the acquisition, development and commercialization of transformative aerospace technologies, including eco-friendly specialty materials which can be successfully deployed and integrated across multiple industry sectors, and disruptive innovations related to the emerging aviation market called Advanced Air Mobility, which include next-generation aircraft. We seek to partner with and acquire strategic interests in visionary companies that accelerate this mission.

Pursuant to the Joint Venture signed with Movychem s.r.o. on April 2, 2022, the Company is planning to commercialize a slate of Retacell-formulated products, mainly through licensing arrangements with major industry leaders, which would allow for more rapid access to the market with reduced capital requirements and financial risk. Our flagship product is a multi-purpose, high-strength fire- and water-resistant composite panel made from a formulation of Retacell^® and a cardboard fiber-reinforced polymeric resin, called NexBoard^TM, which can be sourced from recycled materials.

The Company is currently investigating the requirements to buildout manufacturing facilities in the United States and Eastern Europe to meet the demand for the Retacell^®-infused wallboards. We have identified potential sites, located and priced specialized manufacturing equipment, started to formulate timetables, and hired a managing director with decades of experience to oversee the advanced materials division.

Xeriant continues much of its focus on Advanced Air Mobility (AAM) as it believes the market segment and its related technological advancements will lead to a more sustainable future. Morgan Stanley is forecasting a $1 trillion total addressable global market for eVTOL aircraft and AAM by 2040, which is projected to reach $9 trillion by 2050.  

Xeriant seeks to capitalize on breakthroughs in efficiency and sustainability developed for AAM, which will likely have far-reaching applications in global industries that are seeking ways to increase efficiency while reducing their carbon footprints.

Through our joint venture agreement with XTI Aircraft, we were involved in the successful completion of the preliminary design of their TriFan 600 eVTOL aircraft. The TriFan 600 is being designed to become the fastest, longest-range VTOL aircraft in the world and the first commercial fixed-wing VTOL airplane, with current pre-orders exceeding $3 billion in gross revenues upon delivery of those aircraft. The joint venture continues to be an important component in Xeriant’s plan to bolster its position in AAM.

Xeriant continues to work with XTI Aircraft and is exploring relationships with several AAM companies that are working to solve issues related to safety, autonomy, wireless connectivity, electric propulsion, batteries, hydrogen, navigation systems, computer processing, camera systems, stabilization equipment, imaging sensors and analytics software.

Additionally, Xeriant is leveraging its relationship with Florida Atlantic University to provide a collaborative research arm for technologies that require additional validation and the backing of a respected research institution for credibility. The university also may provide access to various grants through the SBIR (Small Business Innovation Research), STTR (Small Business Technology Transfer, NSF (National Science Foundation) and other programs, and if warranted, introductions into a number of government agencies, such as DOD (Department of Defense) and DARPA (Defense Advanced Research Projects Agency). Xeriant is pursuing strategic alliances with companies that provide complementary technologies and access to new markets.

CONSIDERATIONS RELATED TO OUR BUSINESS

Item 1A. Risk Factors

An investment in our common stock involves a high degree of risk. Before making an investment decision, you should give careful consideration to the following risk factors, in addition to the other information included in this prospectus, including our financial statements and related notes, before deciding whether to invest in shares of our common stock. The occurrence of any of the adverse developments described in the following risk factors could materially and adversely harm our business, financial condition, results of operations or prospects. In that case, the trading price of our common stock could decline, and you may lose all or part of your investment.

RISKS RELATING TO OUR FINANCIAL POSITION AND CAPITAL NEEDS

We are in our development stage and have limited operating history.

We are a development-stage enterprise with a limited operating history with no sales, and operating losses since its inception. We will need to continue building our organization and team to competently evaluate and secure business opportunities for the development of sophisticated technologies. As an early-stage business we will likely encounter unforeseen costs, expenses, competition and other problems to which such businesses are often subject. Our likelihood of success will depend on the problems, uncertainties, unexpected costs, difficulties, complications and delays frequently encountered in developing and expanding a new business and the competitive environment in which we plan to operate. If we fail to successfully address these risks, our business, financial condition and results of operations would be materially harmed.

We anticipate operating losses to continue into the foreseeable future and substantial additional capital may be required that may not be available on acceptable terms.

Currently, there is no revenue being generated and the Company has significant operating losses that are expected to continue into the foreseeable future.  There is no assurance that the Company will be able to raise the capital that will be required to sustain operations and execute its business plan, which involves raising capital for acquisitions as well as developing and commercializing technologies.  We are especially focused on exploitation of its green advanced chemicals business, namely the Retacell^® technology, which may require setting up a manufacturing operation.  Additionally, the joint venture agreement with Movychem requires us to fund $25,000 per month through April 2024, and invest $2,000,000 in the joint venture, Ebenberg, LLC, within five business days of the closing of a financing in which Xeriant receives net proceeds of at least $3,000,000, to acquire 50% ownership of the Movychem patents and intellectual property.

We expect capital outlays and operating expenditures to increase as we expand our product offerings and marketing activities. Our business or operations may change in a manner that would consume available funds more rapidly than anticipated, and substantial additional funding may be required to maintain operations, fund expansion, develop new or enhanced products or services, acquire complementary products, businesses or technologies or otherwise respond to competitive pressures and opportunities. Furthermore, any equity or debt financings, if available at all, may be on terms which are not favorable to the Company (and therefore its shareholders) and, in the case of a new equity offering by the Company, existing shareholders will be diluted unless they purchase their proportionate share of the equity offering. If adequate capital is not available on economically viable terms and conditions, the Company’s business, operating results and financial condition may be materially adversely affected.

We will require additional capital to satisfy our commitments in the Ebenberg, LLC joint venture.

The joint venture with Movychem, s.r.o., requires Xeriant to fund $2,000,000 by September 30, 2022 or six months from the effective date of the joint venture agreement.  Xeriant has a 30-day automatic extension and can pay Movychem a $100,000 fee to extend the Joint Venture Agreement for another 30 days, assuming there are no defaults from Movychem.  If Xeriant does not extend the joint venture or otherwise make arrangements with Movychem to extend this provision, Xeriant would risk dissolution of the joint venture by Movychem, which could negatively affect the value of the Company.

We will need to meet the obligations required by the Auctus Fund, LLC Senior Secured Note and the Amendment to the Note.

The Senior Secured Note and its Amendment have a November 1, 2022 maturity.  One of the obligations of the Company is to uplist to a major exchange.  If Xeriant does not perform under the Note, the Company could experience substantial dilution if Auctus Fund, LLC converts the note balance owed into common shares.

Not obtaining sufficient financing will jeopardize our operations and the ability to execute our business plan.

In addition to the projected proceeds from this offering, we will continue to attempt to raise additional debt and/or equity financing to fund future operations and to provide additional working capital. However, there is no assurance that such financing will be consummated or obtained in sufficient amounts necessary to meet the Company’s needs. If cash resources are insufficient to satisfy the Company’s on-going cash requirements, the Company will be required to scale back or discontinue its product development programs or obtain funds if available (although there can be no certainties) through strategic alliances that may require the Company to relinquish rights to its technology, substantially reduce or discontinue its operations entirely. No assurance can be given that any future financing will be available or, if available, that it will be on terms that are satisfactory to the Company. Even if the Company is able to obtain additional financing, it may contain undue restrictions on our operations, in the case of debt financing, or cause substantial dilution for our stockholders, in the case of equity financing. As a result, we can provide no assurance as to whether or if we will ever be profitable. If we are not able to achieve and maintain profitability, the value of our company and our common stock could decline significantly.

Our recurring operating losses have raised substantial doubt regarding our ability to continue as a going concern.

Our recurring operating losses raise substantial doubt about our ability to continue as a going concern. This condition is expected to continue for the foreseeable future until we can produce sufficient revenues to cover our costs. as we seek to raise funding and invest in our operations as well as our sales and marketing efforts. Given this financial situation, no assurances can be given that we will be able to raise capital in the future on acceptable terms, or at all.  As a result, our independent registered public accounting firm included an explanatory paragraph in its report in our financial statements for the most recent fiscal years with respect to this uncertainty. The perception of our ability to continue as a going concern may make it more difficult for us to obtain financing for the continuation of our operations and could result in the loss of confidence by investors, partners and employees.

RISKS RELATING TO OUR BUSINESS OPERATIONS AND MANAGEMENT

There is no assurance that we or our affiliates will be able to accomplish the design and engineering needed to demonstrate that the technologies that are undertaken, will perform or operate as planned.

Because of unanticipated technological hurdles or the inability to assemble a qualified team to address these challenges, we may not be able to meet the technology development and performance objectives that are needed to be competitive in the various targeted markets.

The development timeline for the development of certain technologies could expand.

Due to unexpected challenges, the length of time to develop certain technologies, may become expanded, causing cost overruns and potentially demanding the infusion of large amounts of capital and other financing, which may not be available. Because of the long timeline, there is also uncertainty regarding the uniqueness or advantages of the technologies at the time they are introduced into the market.

Some technologies are still being developed and specific market applications have not been finalized.

Because some of the anticipated technologies will be in an early stage of development, there is no certainty as to which market applications will be prioritized and targeted as well as the associated timelines and costs involved when the Company reaches that point of determination after a technology has been proven. There is no assurance that the required selling price of our technologies will be competitive.

The Company will face significant industry competition.

Most of the targeted technologies will face significant competition from industry leaders or from well-funded entrants in the marketplace. We could face significant competition from companies who have developed or are developing alternative technologies that could render acquired technologies less competitive than planned. Many existing potential competitors are well-established, have or may have longer-standing relationships with customers and potential business partners, have or may have greater name recognition, and have or may have access to substantially greater financial, technical and marketing resources.

If we are unable to effectively manage our growth, our ability to implement our business strategy and our operating results will likely be materially adversely affected.

Implementation of our business plan will likely place a significant strain on our management who must develop administrative, operating and financial infrastructures. To manage our business and planned growth effectively, we must successfully develop, implement, maintain and enhance our financial and accounting systems and controls, identify, hire and integrate new personnel and manage expanded operations. Salary and benefits of additional personnel can be expected to place significant stress on our financial condition, and the availability of such qualified personnel may be limited. There is no assurance that we will be able to manage the operational requirements related to implementing our business strategy

We are dependent on key personnel.

Our success depends on our ability to identify, hire, train and retain highly qualified, specialized and experienced management and technical personnel. In addition, as we enter new areas of technology, we will need to hire additional highly skilled personnel. Competition for personnel with the required knowledge, skill and experience may be significant, and the Company may not be able to attract, assimilate or retain such personnel. The inability to attract and retain the necessary managerial and technical personnel could have a material adverse effect our business, results of operations and financial condition.

Operations could be adversely affected by interruptions from suppliers of components that are beyond our control.

Our technology, product development and sales could be adversely affected by interruptions in the supply of necessary components which are sourced from a variety of domestic and international vendors, suppliers and distributors. We are also dependent upon third parties to timely deliver supplies that meet our specifications at competitive prices. Shortages or interruptions in the supply of these items, including raw materials and chemicals could adversely affect the availability, quality and cost of items we sell. If such shortages result in increased cost of our supplies, we and may not be able to pass along all of such increased costs to our customers. Such shortages or disruptions could be caused by transportation issues, inclement weather, natural disasters, increased demand, problems in production or distribution, restrictions on imports or exports, the inability of vendors to obtain credit, political instability in the countries in which suppliers and distributors are located, the financial instability of suppliers and distributors, suppliers’ or distributors’ failure to meet our standards, product quality issues, inflation, the price of gasoline, other factors relating to the suppliers and distributors and the countries in which they are located, safety regulations, warnings or advisories or the prospect of such pronouncements, the cancellation of supply or distribution agreements or an inability to renew such arrangements or to find replacements on commercially reasonable terms, or other conditions beyond our control. A shortage or interruption in the availability of certain chemicals, raw materials or supplies could increase costs and limit the availability of products critical to our operations, which in turn could lead to a significant    reduction in our revenue.

Changes in the economy could have a detrimental impact on the Company.

Changes in the general economic climate could have a detrimental impact on our revenue. It is possible that recessionary pressures and other economic factors (such as declining incomes, future potential rising interest rates, higher unemployment and tax increases) may adversely affect the Company. A worsening economy such as we are currently experiencing due to the Covid-19 pandemic may have a material adverse effect on our financial results and on your investment.

Our business, results of operations and financial condition may be adversely impacted by the recent COVID-19 or other significant public health conditions.

The COVID-19 pandemic negatively affected the U.S. and global economy over the past two years, resulting in significant travel restrictions, including mandated closures and orders to “shelter-in-place,” and created significant disruption of supply chains and the financial markets. The extent to which our operations may be impacted by the COVID-19 or other public health conditions cannot be accurately predicted, including actions by government authorities to contain an outbreak or treat its impact. We may experience materially adverse impacts to our business due to a number of potential economic conditions. The impact of significant public health conditions may also exacerbate other risks discussed in these risk factors, any of which could have a material effect on us.

Our success is dependent upon our keeping pace with the advances in technology.

We are positioned as a technology company. Some of our initiatives will be dependent on the technology of other companies. Systems and components may be impacted by rapid changes in technology, including the emergence of new industry standards and practices that could require the Company to make modifications to its platform. Our performance will depend, in part, on our ability to continue to enhance our existing technology or develop new technology that addresses the increasingly sophisticated and varied needs of the market, license leading technologies and respond to technological advances and emerging industry standards and practices on a timely and cost-effective basis. The development of our proprietary technology entails significant technical as well as business risks. We may be unsuccessful in using new technologies effectively or adapting its systems or other proprietary technology to the requirements of emerging industry standards. If we are unable to adapt to these changes and demands, our results of operations and financial condition could be materially and adversely affected.

We could face liability or disruption from security breaches.

Our technology and development process involves the storage of critical, secure and proprietary information. Our communications and computer infrastructure is potentially vulnerable to both physical and electronic invasions, such as cyberattacks and security breaches. We may be required to expend significant capital and other resources to defend against and lessen or correct the adverse effects of these invasions. Any such invasion could result in significant damage to the Company. A person who is able to circumvent the security measures employed by the Company could capture proprietary information; alter or destroy the information of the Company; or cause interruptions of the operations of the Company.

Misappropriation of our intellectual property and proprietary rights could impair our competitive position.

Our success of will depend to some extent upon our proprietary patented technology. The legal protections available to the Company can afford only limited protection, and these means of protecting the intellectual property of the Company may be inadequate. The Company relies and will continue to rely on patent, trademark, trade secret and copyright laws, confidentiality agreements, employment agreements, work for hire agreements, and technical measures to protect its intellectual property. The Company cannot assure that the steps taken by it will prevent misappropriation of its technology or that the agreements entered into for that purpose will be enforceable. Effective trademark, service mark, copyright and trade secret protection may not be available in every jurisdiction in which the Company’s products and services are made available online. The intellectual property of the Company may be subject to even greater risk in foreign jurisdictions, as the laws of many countries do not protect intellectual property to the same extent as the laws of the United States. As part of its confidentiality procedures, the Company generally will enter into agreements with its employees and consultants and limit access to its trade secrets and technology. The Company cannot assure or assume, however, that former employees will not seek to start or enhance other competing products or services to the detriment of the Company, its business, results of operations and financial condition. Nevertheless, management believes that the technical and creative skills of its personnel, continued development of its proprietary systems and technology, as well as brand name recognition and development are more essential in establishing and maintaining a competitive market position.

Despite efforts to protect its proprietary rights, unauthorized persons may attempt to copy aspects of its products or services or to obtain and use information that the Company regards as proprietary. Policing unauthorized use of its proprietary rights is difficult and requires constant attention. The Company may be required to spend significant resources to monitor and police its intellectual property rights. The Company may not be able to detect infringement and may lose its competitive position in the market before it is able to ascertain any such infringement. In addition, competitors may design around the Company’s proprietary technology or develop competing technologies.

Intellectual property litigation may be necessary in the future to enforce the intellectual property rights of the Company, to protect its trade secrets, to determine the validity and scope of the proprietary rights of others or to defend against claims of infringement by the Company. Other companies, including competitors, may obtain patents or other proprietary rights that would prevent, limit or interfere with the ability of the Company to make, use or sell its products and services. Any such litigation by or against the Company, whether the claims are valid or not, could result in the Company incurring substantial costs and diversion of resources, including the attention of senior management. If the Company is unsuccessful in such legal proceedings, the Company could be subjected to significant damages; be required to license technology that is critical to the operations of the Company, if a license is available at a cost which the Company can pay; or be required to develop replacement technologies at substantial cost to the Company in money and time. Any of these results could materially and adversely affect the business, results of operations and financial condition of the Company.

The Company has broad discretion in the use of capital.

The Company has broad discretion with respect to the specific application of capital. There can be no assurance that determinations made by the Company relating to the specific allocation of capital will permit the Company to achieve its business objectives.

Many of the regulations involving Advanced Air Mobility (AAM), including VTOL (Vertical Takeoff and Landing) aircraft and Unmanned Aerial Vehicles (UAV) are still being established

The USDOT, FAA (Federal Aviation Administration) and other agencies at the federal, state and local levels are beginning to address some of the numerous certification, regulatory and legal challenges associated with AAM, including VTOL aircraft, UAV and unmanned aerial systems (UAS). A comprehensive set of standards and enforcement procedures for these new transport systems will need to be developed. New aircraft and their operators must undergo rigorous testing and certification, which may require new or modified airworthiness certification standards. These aircraft will also need to comply with existing regulations or be the subject of new regulations to cover their activities. Current regulations govern operating BVLOS (beyond visual line of sight), passenger transport, operating over people and public streets, privacy, transporting commercial cargo across state lines and instrument-based flight. The integration of UAS and UAM into the National Airspace System and air traffic management is a critical factor, requiring a remote identification process for these aircraft. The FAA’s Unmanned Aircraft System Integration Pilot Program (IPP) will provide certification necessary to operate UAVs for certain applications. It is uncertain how new or changed laws and regulations will affect the introduction of new aerial platforms into the marketplace. The time and costs involved in obtaining these certifications and regulatory compliance may adversely impact the development process.

We do not intend to pay cash dividends on our common stock in the foreseeable future.

We currently anticipate that we will retain all future earnings, if any, to finance the growth and development of our business and do not anticipate paying cash dividends on our common stock in the foreseeable future. Any payment of cash dividends will depend upon our financial condition, capital requirements, earnings and other factors deemed relevant by our board of directors.

Our stock may be subject to certain risks associated with low-priced stocks.

Our common stock is expected to continue to trade on the over-the-counter (OTC) market in the near future. The Company is a development stage company with no present revenues, so the trading price of our common stock may remain below $5.00. So long as our common stock trades below $5.00 per share, the stock will be treated as a “penny stock.” Broker-dealers who sell penny stocks to their established customers must deliver a disclosure schedule explaining the penny stock market and the risks associated with investing in penny stocks prior to any transaction. Additional restrictions apply to broker-dealers who sell penny stocks to persons other than established customers and accredited investors (generally defined as an investor with a net worth in excess of $1,000,000 or annual income exceeding $200,000 individually or $300,000 together with a spouse). For these types of transactions, the broker-dealer must make a special suitability determination for the purchaser and have received the purchaser’s written consent to the transaction prior to the sale. The broker-dealer also must disclose the commissions payable to the broker-dealer, current bid and offer quotations for the penny stock and, if the broker-dealer is the sole market-maker, the broker-dealer must disclose this fact and the broker-dealer’s presumed control over the market. Such information must be provided by the broker-dealer to the customer orally or in writing before or with the written confirmation of trade sent to the customer. Monthly statements must be sent disclosing recent price information for the penny stock held in the account and information on the limited market in penny stocks. Broker-dealers may be discouraged from dealing with our common stock if they have to bear these additional burdens, which could severely limit the market liquidity of the common stock and the ability of our stockholders to sell their shares.  

Litigation may adversely affect our business, financial condition, and results of operations.

From time to time in the normal course of our business operations, we may become subject to litigation that may result in liability material to our financial statements as a whole or may negatively affect our operating results if changes to our business operations are required. The cost to defend such litigation may be significant and may require a diversion of our resources. There also may be adverse publicity associated with litigation that could negatively affect customer perception of our business, regardless of whether the allegations are valid or whether we are ultimately found liable. Insurance may not be available at all or in sufficient amounts to cover any liabilities with respect to these or other matters. A judgment or other liability in excess of our insurance coverage for any claims could adversely affect our business and the results of our operations.

Our insurance coverage may be inadequate to cover all significant risk exposures.

While we intend to maintain insurance for certain risks, the amount of our insurance coverage may not be adequate to cover all claims or liabilities, and we may be forced to bear substantial costs resulting from risks and uncertainties of our business. It is also not possible to obtain insurance to protect against all operational risks and liabilities. The failure to obtain adequate insurance coverage on terms favorable to us, or at all, could have a material adverse effect on our business, financial condition, and results of operations. We do not have any business interruption insurance. Any business disruption could result in substantial costs and diversion from the Company executing its business plan.

RISKS RELATED TO OUR DEPENDENCE ON THIRD PARTIES

We may fail to retain or recruit necessary personnel, and we may be unable to secure the services of consultants.

As of the date of this filing, most of our management team of five people is currently paid as consultants or independent contractors. Keith Duffy, CEO, has an Employment Agreement, but is also paid as a contractor through his entity, Ancient Investments, LLC.  We also have engaged and plan to continue to engage outside consultants called Senior Advisors to advise us and have been and will be required to retain additional consultants and employees. Our future performance will depend in part on our ability to successfully integrate newly hired officers into our management team and our ability to develop an effective working relationship among senior management.

Certain of our directors, officers, advisors, and consultants serve as officers, directors, advisors, or consultants of other companies that might be developing competitive products. Other than corporate opportunities, none of our directors are obligated under any agreement or understanding with us to make any additional products or technologies available to us. Similarly, we can give no assurances, and we do not expect, and stockholders should not expect, that any product or technology identified by any of our directors or affiliates in the future would be made available to us other than corporate opportunities. We can give no assurances that any such other companies will not have interests that are in conflict with its interests.

Losing key personnel or failing to recruit necessary additional personnel would impede our ability to attain our development objectives. There is intense competition for qualified personnel in the technology field, and we may not be able to attract and retain the qualified personnel we need to develop our business.

We rely on independent organizations, advisors and consultants to perform certain services for us, including handling substantially all aspects of regulatory approval, manufacturing, marketing, and sales. We expect that this will continue to be the case. Such services may not always be available to us on a timely basis.

We may be subject to claims that our consultants or independent contractors have wrongfully used or disclosed alleged trade secrets of their other clients or former employers to us.

As is common in the technology industry, we engage the services of consultants to assist in the development of our products. Many of these consultants were previously employed at or may have previously been or are currently providing consulting services to, other technology companies, including our competitors or potential competitors. We may become subject to claims that we or our consultants have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of our former employers or their former or current customers. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

RISKS RELATED TO OUR INTELLECTUAL PROPERTY

We rely on patents and patent applications and various regulatory exclusivities to protect some of our product candidates, and our ability to compete may be limited or eliminated if we are not able to protect our products.

The patent positions of companies such as ours are uncertain and involve complex legal and factual questions. We may incur significant expenses in protecting our intellectual property and defending or assessing claims with respect to intellectual property owned by others. Any patent or other infringement litigation by or against us could cause us to incur significant expenses and divert the attention of our management.

Others may file patent applications or obtain patents on similar technologies that compete with our products or those of our joint ventures. We cannot predict how broad the claims in any such patents or applications will be and whether they will be allowed. Once claims have been issued, we cannot predict how they will be construed or enforced. We and/or our joint ventures may infringe upon intellectual property rights of others without being aware of it. If another party claims we are infringing their technology, we could have to defend an expensive and time-consuming lawsuit, pay a large sum if we are found to be infringing, or be prohibited from selling or licensing our products unless we obtain a license or redesign our products, which may not be possible.

We and/or our joint ventures also rely on trade secrets and proprietary know-how to develop and maintain our or our joint venture’s competitive position. Some of our current or former employees, consultants, scientific advisors, contractors, current or prospective corporate collaborators, may unintentionally or willfully disclose our confidential information to competitors or use our proprietary technology for their own benefits. Furthermore, enforcing a claim alleging the infringement of our trade secrets would be expensive and difficult to prove, making the outcome uncertain. Our competitors may also independently develop similar knowledge, methods, and know-how or gain access to our proprietary information through some other means.

We may incur substantial costs as a result of litigation or other proceedings relating to patent and other intellectual property rights, as well as costs associated with lawsuits.

If any other person filed patent applications, or is issued patents, claiming technology also claimed by us, we may be required to participate in interference or derivation proceedings in the U.S. Patent and Trademark Office to determine priority and/or ownership of the invention. Our licensors or we may also need to participate in interference proceedings involving issued patents and pending applications of another entity.

The intellectual property environment in our industry is particularly complex, constantly evolving and highly fragmented. Other companies and institutions have issued patents and have filed or will file patent applications that may issue into patents that cover or attempt to cover products, processes or technologies similar to us. We have not conducted freedom-to-use patent searches on all aspects of our product candidates or potential product candidates and may be unaware of relevant patents and patent applications of third parties. In addition, the freedom-to-use patent searches that have been conducted may not have identified all relevant issued patents or pending patent applications. We cannot provide assurance that our proposed products in this area will not ultimately be held to infringe one or more valid claims owned by third parties which may exist or come to exist in the future or that in such case we will be able to obtain a license from such parties on acceptable terms.

We cannot guarantee that our technologies will not conflict with the rights of others. In some foreign jurisdictions, we could become involved in opposition proceedings, either by opposing the validity of others’ foreign patents or by persons opposing the validity of our foreign patents.

We may also face frivolous litigation or lawsuits from various competitors or from litigious securities attorneys. The cost of any litigation or other proceeding relating to these areas, even if deemed frivolous or resolved in our favor, could be substantial and could distract management from its business. Uncertainties resulting from initiation and continuation of any litigation could have a material adverse effect on our ability to continue our operations.

If we infringe the rights of others, we could be prevented from selling products or forced to pay damages.

If our products, methods, processes, and other technologies are found to infringe the rights of other parties, we could be required to pay damages, or may be required to cease using the technology or to license rights from the prevailing party. Any prevailing party may be unwilling to offer us a license on commercially acceptable terms.

We cannot be certain we will be able to obtain patent protection to protect our product candidates and technology.

We cannot be certain that all patents applied for will be issued. If a third party has also filed a patent application relating to an invention claimed by us or one or more of our licensors, we may be required to participate in an interference or derivation proceeding declared or instituted by the United States Patent and Trademark Office, which could result in substantial uncertainties and cost for us, even if the eventual outcome is favorable to us. The degree of future patent protection for our product candidates and technology is uncertain. For example:

If we fail to comply with our obligations in the agreements under which we or our joint venture partners may license intellectual property rights from third parties or otherwise experience disruptions to our business relationships with our licensors, we could lose rights that are important to our business.

We have entered and may be required to enter into agreements that are important to our business, including our joint venture agreements with XTI Aircraft Company and Movychem s.r.o. These agreements have imposed various diligence, milestone payment, royalty and other obligations on us. For example, if we enter into exclusive agreements with various third parties (for example, universities and research institutions), we may be required to use commercially reasonable efforts to engage in various development and commercialization activities with respect to licensed products and may need to satisfy specified milestones and royalty payment obligations. If we fail to comply with any obligations under our agreements with any of these licensors, we may be subject to termination of the license agreements in whole or in part; increased financial obligations to our licensors or loss of exclusivity in a particular field or territory, in which case our ability to develop or commercialize products covered by the license agreements will be impaired.

In addition, disputes may arise regarding intellectual property subject to a license agreement, including:

If disputes over the intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on acceptable terms, we may be unable to successfully develop and commercialize the affected product candidates.

We may need to obtain licenses from third parties to advance our research to allow commercialization of our product candidates. We may fail to obtain any of these licenses at a reasonable cost or on reasonable terms, if at all. In that event, we would be unable to further develop and commercialize one or more of our product candidates, which could harm our business significantly.

We may infringe the intellectual property rights of others, which may prevent or delay our product development efforts and stop us from commercializing or increase the costs of commercializing our product candidates.

Our success will depend in part on our ability to operate without infringing the proprietary rights of third parties. We cannot guarantee that our products or product candidates, or manufacture or use of our products or product candidates, will not infringe third-party patents. Furthermore, a third party may claim that we are using inventions covered by the third party’s patent rights and may go to court to stop us from engaging in our normal operations and activities, including making or selling our product candidates or products. These lawsuits are costly and could affect our results of operations and divert the attention of managerial and scientific personnel. Some of these third parties may be better capitalized and have more resources than us. There is a risk that a court would decide that we are infringing the third party’s patents and would order us to stop the activities covered by the patents. In that event, we may not have a viable way to get around the patent and may need to halt commercialization of the relevant product candidate(s) or product(s). In addition, there is a risk that a court will order us to pay the other party damages for having violated the other party’s patents. In addition, we may be obligated to indemnify our licensors and collaborators against certain intellectual property infringement claims brought by third parties, which could require us to expend additional resources. The aerospace and technology industries have produced a proliferation of patents, and it is not always clear to industry participants, including us, which patents cover various types of products or methods. The coverage of patents is subject to interpretation by the courts, and the interpretation is not always uniform.

If we are sued for patent infringement, we would need to demonstrate that our products or methods either do not infringe the claims of the relevant patent or that the patent claims are invalid or unenforceable, and we may not be able to do this. Proving invalidity is difficult. For example, in the United States, proving invalidity requires a showing of clear and convincing evidence to overcome the presumption of validity enjoyed by issued patents. Even if we are successful in these proceedings, we may incur substantial costs and divert management’s time and attention in pursuing these proceedings, which could have a material adverse effect on us. If we are unable to avoid infringing the patent rights of others, we may be required to seek a license, which may not be available, and then we will have to defend an infringement action or challenge the validity of the patent in court. Patent litigation is costly and time consuming. We may not have sufficient resources to bring these actions to a successful conclusion. In addition, if we do not obtain a license, fail to develop or obtain non-infringing technology, fail to defend an infringement action successfully or have infringed patents declared invalid or unenforceable, we may incur substantial monetary damages, encounter significant delays in bringing our product candidates to market and be precluded from manufacturing or selling our product candidates.

We cannot be certain that others have not filed patent applications for technology covered by our pending applications, or that we were the first to invent the technology, because:

Our competitors may have filed, and may in the future file, patent applications covering technology similar to ours. Any such patent applications may have priority over our patent applications, which could further require us to obtain rights to issued patents covering such technologies. If another party has filed US patent applications on inventions similar to ours that claims priority to any applications filed prior to the priority dates of our applications, we may have to participate in an interference proceeding declared or a derivation proceed instituted by the USPTO to determine priority of invention in the United States. The costs of these proceedings could be substantial, and it is possible that such efforts would be unsuccessful if, unbeknownst to us, the other party had independently arrived at the same or similar inventions prior to our own inventions, resulting in a loss of our U.S. patent position with respect to such inventions. Other countries have similar laws that permit secrecy of patent applications, and thus the third party’s patent or patent application may be entitled to priority over our applications in such jurisdictions.

Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.

We may be subject to claims that our employees, consultants or independent contractors have wrongfully used or disclosed alleged trade secrets.

As is common in the aerospace and technology industries, we may employ individuals who were previously employed at aerospace and technology companies, including our competitors or potential competitors. Although we try to ensure that our employees, consultants and independent contractors do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. If we fail in defending any such claims, in addition to paying monetary damages, we could lose valuable intellectual property rights or personnel, which could adversely impact our business. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

Our intellectual property may not be sufficient to protect our products from competition, which may negatively affect our business as well as limit our partnership or acquisition appeal.

We may be subject to competition despite the existence of intellectual property we license, or we or our joint ventures own. We can give no assurances that our intellectual property will be sufficient to prevent third parties from designing around the patents we own or license and developing and commercializing competitive products. The existence of competitive products that avoid our intellectual property could materially adversely affect our operating results and financial condition. Furthermore, limitations, or perceived limitations, in our intellectual property may limit the interest of third parties to partner, collaborate or otherwise transact with us, if third parties perceive a higher than acceptable risk to commercialization of our products or future products.

Our approach involves filing patent applications covering new methods of use and/or new formulations of previously known, studied and/or marketed devices. Although the protection afforded by patents issued from our patent applications may be significant, when looking at our patents’ ability to block competition, the protection offered by our patents may be, to some extent, more limited than the protection provided by patents claiming the composition of matter previously unknown. If a competitor were able to successfully design around any method of use and formulation patents we may have in the future, our business and competitive advantage could be significantly affected.

We may elect to sue a third party, or otherwise make a claim, alleging infringement or other violation of patents, trademarks, trade dress, copyrights, trade secrets, domain names or other intellectual property rights that we either own or license. If we do not prevail in enforcing our intellectual property rights in this type of litigation, we may be subject to:

A third party may also challenge the validity, enforceability or scope of the intellectual property rights that we license or own; and, the result of these challenges may narrow the claim scope of or invalidate patents that are integral to our product candidates in the future. There can be no assurance that we will be able to successfully defend patents we own or licensed in an action against third parties due to the unpredictability of litigation and the high costs associated with intellectual property litigation, amongst other factors.

The laws of some jurisdictions do not protect intellectual property rights to the same extent as the laws or rules and regulations in the United States and Europe, and many companies have encountered significant difficulties in protecting and defending such rights in such jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in other jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated, rendered unenforceable or interpreted narrowly and our patent applications at risk of not issuing, and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license. Furthermore, while we intend to protect our intellectual property rights in our expected significant markets, we cannot ensure that we will be able to initiate or maintain similar efforts in all jurisdictions in which we may wish to market our products or product candidates. Accordingly, our efforts to protect our intellectual property rights in such countries may be inadequate, which may have an adverse effect on our ability to successfully commercialize our product candidates in all of our expected significant foreign markets. If we or our licensors encounter difficulties in protecting, or are otherwise precluded from effectively protecting, the intellectual property rights important for our business in such jurisdictions, the value of these rights may be diminished, and we may face additional competition from others in those jurisdictions.

Changes to patent law, for example the Leahy-Smith America Invests Act, AIA or Leahy-Smith Act, of 2011 and the Patent Reform Act of 2009 and other future article of legislation in the U.S., may substantially change the regulations and procedures surrounding patent applications, issuance of patents, prosecution of patents, challenges to patent validity, and patent enforcement. We can give no assurances that our patents and those of our licensor(s) can be defended or will protect us against future intellectual property challenges, particularly as they pertain to changes in patent law and future patent law interpretations.

In addition, enforcing and maintaining our intellectual property protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by the U.S. Patent and Trademark Office and courts, and foreign government patent agencies and courts, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

If we are not able to protect and control our unpatented trade secrets, know-how and other technological innovation, we may suffer competitive harm.

We also rely on proprietary trade secrets and unpatented know-how to protect our research and development activities, particularly when we do not believe that patent protection is appropriate or available. However, trade secrets are difficult to protect. We will attempt to protect our trade secrets and unpatented know-how by requiring our employees, consultants, collaborators, and advisors to execute a confidentiality and non-use agreement. We cannot guarantee that these agreements will provide meaningful protection, that these agreements will not be breached, that we will have an adequate remedy for any such breach, or that our trade secrets will not otherwise become known or independently developed by a third party. Our trade secrets, and those of our present or future collaborators that we utilize by agreement, may become known or may be independently discovered by others, which could adversely affect the competitive position of our product candidates.

We may incur substantial costs enforcing our patents, defending against third-party patents, invalidating third-party patents or licensing third-party intellectual property, as a result of litigation or other proceedings relating to patent and other intellectual property rights.

We may be unaware of or unfamiliar with prior art and/or interpretations of prior art that could potentially impact the validity or scope of our patents, pending patent applications, or patent applications that we will file. We may have elected, or elect now or in the future, not to maintain or pursue intellectual property rights that, at some point in time, may be considered relevant to or enforceable against a competitor.

We take efforts and enter into agreements with employees, consultants, collaborators, and advisors to confirm ownership and chain of title in intellectual property rights. However, an inventorship or ownership dispute could arise that may permit one or more third parties to practice or enforce our intellectual property rights, including possible efforts to enforce rights against us.

We may not have rights under some patents or patent applications that may cover technologies that we use in our research, product candidates and particular uses thereof that we seek to develop and commercialize, as well as synthesis of our product candidates. Third parties may own or control these patents and patent applications in the United States and elsewhere. These third parties could bring claims against us or our collaborators that would cause us to incur substantial expenses and, if successful against us, could cause us to pay substantial damages. Further, if a patent infringement suit were brought against us or our collaborators, we or they could be forced to stop or delay research, development, manufacturing or sales of the product or product candidate that is the subject of the suit. We or our collaborators therefore may choose to seek, or be required to seek, a license from the third-party and would most likely be required to pay license fees or royalties or both. These licenses may not be available on acceptable terms, or at all. Even if we or our collaborators were able to obtain a license, the rights may be nonexclusive, which would give our competitors access to the same intellectual property. Ultimately, we could be prevented from commercializing a product or product candidate or forced to cease some aspect of our business operations, as a result of patent infringement claims, which could harm our business.

There has been substantial litigation and other legal proceedings regarding patent and other intellectual property rights in the broad technology industry. Although we are not currently a party to any patent litigation or any other adversarial proceeding, including any interference or derivation proceeding declared or instituted before the United States Patent and Trademark Office, regarding intellectual property rights with respect to our products, product candidates and technology, it is possible that we may become so in the future. We are not currently aware of any actual or potential third-party infringement claim involving our product candidates. The cost to us of any patent litigation or other proceeding, even if resolved in our favor, could be substantial. The outcome of patent litigation is subject to uncertainties that cannot be adequately quantified in advance, including the demeanor and credibility of witnesses and the identity of the adverse party, especially in the aerospace and technology related patent cases that may turn on the testimony of experts as to technical facts upon which experts may reasonably disagree. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their substantially greater financial resources. If a patent or other proceeding is resolved against us, we may be enjoined from researching, developing, manufacturing or commercializing our products or product candidates without a license from the other party and we may be held liable for significant damages. We may not be able to obtain any required license on commercially acceptable terms or at all.

Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could harm our ability to compete in the marketplace. Patent litigation and other proceedings may also absorb significant management time.

If we are unable to protect our intellectual property rights, our competitors may develop and market products with similar features that may reduce demand for our potential products.

The following factors are important to our success:

We will be able to protect our intellectual property rights in patents and trade secrets from unauthorized use by third parties only to the extent that such intellectual property rights are covered by valid and enforceable patents or are effectively maintained as trade secrets.

Because issues of patentability involve complex legal and factual questions, the issuance, scope and enforceability of patents cannot be predicted with certainty. Patents may be challenged, invalidated, found unenforceable, or circumvented. United States patents and patent applications may be subject to interference and derivation proceedings, United States patents may also be subject to post grant proceedings, including re-examination, derivation, Inter Partes Review and Post Grant Review, in the United States Patent and Trademark Office and foreign patents may be subject to opposition or comparable proceedings in corresponding foreign patent offices, which could result in either loss of the patent or denial of the patent application or loss or reduction in the scope of one or more of the claims of the patent or patent application. In addition, such interference, derivation, post grant and opposition proceedings may be costly. Thus, any patents that we own or license from others may not provide any protection against competitors. Furthermore, an adverse decision in an interference or derivation proceeding can result in a third-party receiving the patent rights sought by us, which in turn could affect our ability to market a potential product to which that patent filing was directed. Our pending patent applications, those that we may file in the future, or those that we may license from third parties may not result in patents being issued. If issued, they may not provide us with proprietary protection or competitive advantages against competitors with similar technology. Furthermore, others may independently develop similar technologies or duplicate any technology that we have developed. Many countries, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. For example, compulsory licenses may be required in cases where the patent owner has failed to “work” the invention in that country, or the third-party has patented improvements. In addition, many countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of our patents. Moreover, the legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents and other intellectual property protection, which makes it difficult to stop infringement.

In addition, our ability to enforce our patent rights depends on our ability to detect infringement. It is difficult to detect infringers who do not advertise or otherwise promote the compositions that are used in their products. Any litigation to enforce or defend our patent rights, even if we prevail, could be costly and time-consuming and would divert the attention of management and key personnel from business operations.

We will also rely on trade secrets, know-how and technology, which are not protected by patents, to maintain our competitive position. We will seek to protect this information by entering into confidentiality agreements with parties that have access to it, such as strategic partners, collaborators, employees, contractors and consultants. Any of these parties may breach these agreements and disclose our confidential information or our competitors might learn of the information in some other way. If any trade secret, know-how or other technology not protected by a patent were disclosed to, or independently developed by, a competitor, our business, financial condition and results of operations could be materially adversely affected.

RISKS RELATED TO OWNING OUR COMMON STOCK

If we are unable to establish appropriate internal financial reporting controls and procedures, it could cause us to fail to meet our reporting obligations, result in the restatement of our financial statements, harm our operating results, subject us to regulatory scrutiny and sanction, cause investors to lose confidence in our reported financial information and have a negative effect on the market price for shares of our Common Stock.

Effective internal controls are necessary for us to provide reliable financial reports and to effectively prevent fraud. We maintain a system of internal control over financial reporting, which is defined as a process designed by, or under the supervision of, our principal executive officer and principal financial officer, or persons performing similar functions, and effected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

As a public company, we have significant additional requirements for enhanced financial reporting and internal controls. We are required to document and test our internal control procedures in order to satisfy the requirements of Section 404 of the Sarbanes-Oxley Act of 2002, which requires annual management assessments of the effectiveness of our internal controls over financial reporting. The process of designing and implementing effective internal controls is a continuous effort that requires us to anticipate and react to changes in our business and the economic and regulatory environments and to expend significant resources to maintain a system of internal controls that is adequate to satisfy our reporting obligations as a public company.

We cannot assure you that we will, in the future, identify areas requiring improvement in our internal control over financial reporting. We cannot assure you that the measures we will take to remediate any areas in need of improvement will be successful or that we will implement and maintain adequate controls over our financial processes and reporting in the future as we continue our growth. If we are unable to establish appropriate internal financial reporting controls and procedures, it could cause us to fail to meet our reporting obligations, result in the restatement of our financial statements, harm our operating results, subject us to regulatory scrutiny and sanction, cause investors to lose confidence in our reported financial information and have a negative effect on the market price for shares of our Common Stock.

The market price of our Common Stock may be volatile.

The market price of our Common Stock may be highly volatile. Some of the factors that may materially affect the market price of our Common Stock are beyond our control, such as changes in financial estimates by industry and securities analysts, conditions or trends in the industry in which we operate or sales of our Common Stock, as well as other factors, such as investor perceptions of the prospects for the advanced materials and technology industry. These factors may materially adversely affect the market price of our Common Stock, regardless of our performance. In addition, public stock markets have experienced extreme price and trading volume volatility. This volatility has significantly affected the market prices of securities of many companies for reasons frequently unrelated to the operating performance of the specific companies. These broad market fluctuations may adversely affect the market price of our Common Stock.

Our directors and executive officers can exert significant control over our business and affairs and have actual or potential interests that may depart from those of investors in the subsequent financings.

The interests of our directors and officers may differ from the interests of our other stockholders, including purchasers of our securities, in future financings. As a result, based on their board seats and offices, such persons will have significant influence over and control all corporate actions requiring stockholder approval, irrespective of how the Company’s other stockholders, may vote, including the following actions:

This concentration of ownership by itself may have the effect of impeding a merger, consolidation, takeover or other business consolidation, or discouraging a potential acquirer from making a tender offer for the Common Stock which in turn could reduce our stock price or prevent our stockholders from realizing a premium over our stock price.

We may issue more shares in a future financing or pursuant to existing agreements which will result in substantial dilution.

Our Amended and Restated Certificate of Incorporation authorizes the issuance of a maximum of 5,000,000,000 shares of Common Stock and a maximum of 100,000,000 shares of Preferred Stock. Any future merger or acquisition effected by us would result in the issuance of additional securities without stockholder approval and the substantial dilution in the percentage of our Common Stock held by our then existing stockholders. Moreover, the Common Stock issued in any such merger or acquisition transaction may be valued on an arbitrary or non-arm’s-length basis by our management, resulting in an additional reduction in the percentage of Common Stock held by our then existing stockholders. Additionally, we expect to seek additional financing in order to provide working capital to the operating business. Our Board of Directors has the power to issue any or all of such authorized but unissued shares without stockholder approval. To the extent that additional shares of Common Stock or Preferred Stock are issued in connection with and following a business combination or otherwise, dilution to the interests of our stockholders will occur and the rights of the holders of Common Stock might be materially and adversely affected.

Our Board of Directors is authorized to issue Preferred Stock without obtaining shareholder approval.

Our Amended and Restated Certificate of Incorporation authorizes the issuance of up to 100,000,000 shares of Preferred Stock with designations, rights and preferences determined from time to time by the Board of Directors. Accordingly, our Board of Directors is empowered, without stockholder approval, to issue Preferred Stock with dividend, liquidation, conversion, voting, or other rights which could adversely affect the voting power or other rights of the holders of the Common Stock. In the event of issuance, the Preferred Stock could be utilized, under certain circumstances, as a method of discouraging, delaying or preventing a change in control of the Company. Although we have no present intention to issue any shares of Preferred Stock, there can be no assurance that the Company will not do so in the future. 

Market and economic conditions may negatively impact our business, financial condition and share price.

Concerns over medical epidemics, energy costs, geopolitical issues, the U.S. mortgage market and a deteriorating real estate market, unstable global credit markets and financial conditions, and volatile oil prices have led to periods of significant economic instability, diminished liquidity and credit availability, declines in consumer confidence and discretionary spending, diminished expectations for the global economy and expectations of slower global economic growth, increased unemployment rates, and increased credit defaults in recent years. Our general business strategy may be adversely affected by any such economic downturns (such as the recent downturn related to the COVID-19 pandemic), volatile business environments and continued unstable or unpredictable economic, market, and geopolitical conditions, such as the current situation in the Ukraine. If these conditions continue to deteriorate or do not improve, it may make any necessary debt or equity financing more difficult to complete, more costly, and more dilutive. Failure to secure any necessary financing in a timely manner and on favorable terms could have a material adverse effect on our growth strategy, financial performance, and share price and could require us to delay or abandon development or commercialization plans.

Future sales and issuances of our common stock could result in additional dilution of the percentage ownership of our stockholders and could cause our share price to fall.

We expect that significant additional capital will be needed in the future to continue our planned operations, including increased marketing, hiring new personnel, commercializing our product, and continuing activities as an operating public company. To the extent we raise additional capital by issuing equity securities, our stockholders may experience substantial dilution. We may sell common stock, convertible securities or other equity securities in one or more transactions at prices and in a manner, we determine from time to time. If we sell common stock, convertible securities or other equity securities in more than one transaction, investors may be materially diluted by subsequent sales. Such sales may also result in material dilution to our existing stockholders, and new investors could gain rights superior to our existing stockholders.

We do not intend to pay cash dividends on our shares of common stock so any returns will be limited to the value of our shares.

We currently anticipate that we will retain future earnings for the development, operation and expansion of our business and do not anticipate declaring or paying any cash dividends for the foreseeable future. Any return to stockholders will therefore be limited to the increase, if any, of our share price.

Our Amended and Restated Certificate of Incorporation and our Amended and Restated Bylaws, and Nevada law may have anti-takeover effects that could discourage, delay or prevent a change in control, which may cause our stock price to decline.

Our Amended and Restated Certificate of Incorporation and our Amended and Restated Bylaws, and Nevada law could make it more difficult for a third party to acquire us, even if closing such a transaction would be beneficial to our stockholders. We are authorized to issue up to 100,000,000 shares of preferred stock. This preferred stock may be issued in one or more series, the terms of which may be determined at the time of issuance by our Board of Directors without further action by stockholders. The terms of any series of preferred stock may include voting rights (including the right to vote as a series on particular matters), preferences as to dividend, liquidation, conversion and redemption rights and sinking fund provisions. The issuance of any preferred stock could materially adversely affect the rights of the holders of our common stock, and therefore, reduce the value of our common stock. In particular, specific rights granted to future holders of preferred stock could be used to restrict our ability to merge with, or sell our assets to, a third party and thereby preserve control by the present management.

Provisions of our Certificate of Incorporation and our Amended and Restated Bylaws and Nevada law also could have the effect of discouraging potential acquisition proposals or making a tender offer or delaying or preventing a change in control, including changes a stockholder might consider favorable. Such provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management. In particular, the certificate of incorporation and bylaws and Nevada law, as applicable, among other things:

Financial reporting obligations of being a public company in the U.S. are expensive and time-consuming, and our management will be required to devote substantial time to compliance matters.

As a publicly traded company we incur significant additional legal, accounting and other expenses. The obligations of being a public company in the U.S. require significant expenditures and will place significant demands on our management and other personnel, including costs resulting from public company reporting obligations under the Exchange Act and the rules and regulations regarding corporate governance practices, including those under the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act, and the listing requirements of the stock exchange on which our securities are listed. These rules require the establishment and maintenance of effective disclosure and financial controls and procedures, internal control over financial reporting and changes in corporate governance practices, among many other complex rules that are often difficult to implement, monitor and maintain compliance with. Moreover, despite recent reforms made possible by the JOBS Act, the reporting requirements, rules, and regulations will make some activities more time-consuming and costly, particularly after we are no longer an “emerging growth company.” In addition, we expect these rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance. Our management and other personnel will need to devote a substantial amount of time to ensure that we comply with all of these requirements and to keep pace with new regulations, otherwise we may fall out of compliance and risk becoming subject to litigation or being delisted, among other potential problems.

There will be a substantial number of common shares eligible for future sale from the conversion of Series A Preferred shares.

There were 780,132 shares of our Series A Preferred Stock outstanding as of June 30, 2022. Each preferred share is convertible into 1,000 common shares. Once converted, these shares are eligible for resale under Rule 144. The sale, or availability for sale, for the foregoing shares could adversely affect the market price of our common stock or impair our ability to raise capital through future sales of our common stock.

Item 1B. Unresolved Staff Comments

N/A.

Item 2. Properties

The Company’s headquarters consists of 2,911 square feet of leased office space located in the Research Park at Florida Atlantic University, Innovation Centre 1, 3998 FAU Blvd., Suite 309 Boca Raton, FL 33431.

Item 3. Legal Proceedings

On September 1, 2021, Xeriant Inc. brought a cause of action in the Southern District of Florida against a former shareholder for claims, including but not limited to, breach of contract, misrepresentation, and asserting claims to recoup monetary and in-kind distributions made to the shareholder by the Company. The defendant submitted an affirmative defense and counterclaim on October 29, 2021.

There is no pending litigation against the Company and to our knowledge no litigation is contemplated or threatened. To our knowledge, none of our directors, officers, 5% shareholders or affiliates are party to any legal proceedings that would have a material adverse effect on our business, financial condition, or operating results.

Item 4. Mine Safety Disclosures.

Not Applicable.

PART II

Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities. Market Information

Our common stock is quoted on OTC Markets under the symbol “XERI.”

Shares of our common stock have historically been thinly traded, and as a result, our stock price as quoted by OTC Markets may not reflect an actual or perceived value. The following table sets forth the approximate high and low bid prices for our common stock for the last two fiscal years and interim periods. The quotations reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not represent actual transactions.

Our Transfer Agent

Olde Monmouth Stock Transfer Company, with offices at 200 Memorial Parkway, Atlantic Highlands, New Jersey 07716, is the transfer agent for our shares of common stock. The transfer agent is responsible for all record-keeping and administrative functions in connection with our shares of common stock.

Holders

As of June 30, 2022, there were 199 holders of record of our common stock.

Dividends

We have not declared any cash dividends, nor do we intend to do so in the foreseeable future.

Penny Stock Regulations

The SEC has adopted regulations which generally define so-called “penny stocks” to be an equity security that has a market price less than $5.00 per share or an exercise price of less than $5.00 per share, subject to certain exemptions. The Registrant's common stock is a “penny stock” and is subject to Rule 15g-9 under the Exchange Act, or the Penny Stock Rule. This rule imposes additional sales practice requirements on broker-dealers that sell such securities to persons other than established customers and “accredited investors” (generally, individuals with a net worth in excess of $1,000,000 or annual incomes exceeding $200,000, or $300,000 together with their spouses). For transactions covered by Rule 15g-9, a broker-dealer must make a special suitability determination for the purchaser and have received the purchaser's written consent to the transaction prior to sale. As a result, this rule may affect the ability of broker-dealers to sell our securities and may affect the ability of purchasers to sell any of our securities in the secondary market, thus possibly making it more difficult for us to raise additional capital.

For any transaction involving a penny stock, unless exempt, the rules require delivery, prior to any transaction in penny stock, of a disclosure schedule required by the SEC relating to the penny stock market. Disclosure is also required to be made about sales commissions payable to both the broker-dealer and the registered representative and current quotations for the securities. Finally, monthly statements are required to be sent disclosing recent price information for the penny stock held in the account and information on the limited market in penny stock.

There can be no assurance that the Registrant's common stock will qualify for exemption from the Penny Stock Rule. Even if the Registrant's common stock were exempt from the Penny Stock Rule, the Registrant would remain subject to Section 15(b)(6) of the Exchange Act, which gives the SEC the authority to restrict any person from participating in a distribution of penny stock, if the SEC finds that such a restriction would be in the public interest.

Securities Authorized for Issuance under Equity Compensation Plans

The Registrant does not have any equity compensation plans and accordingly there are no shares authorized for issuance under an equity compensation plan.

Item 6. Selected Financial Data.

Not applicable because we are a smaller reporting company.

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations

The following discussion of our financial condition and results of operations should be read in conjunction with the audited and unaudited financial statements and the notes to those statements included elsewhere in this Report. This discussion contains forward-looking statements that involve risks and uncertainties. You should specifically consider the various risk factors identified in this Report that could cause actual results to differ materially from those anticipated in these forward-looking statements.

Financial Results

The following discussion of the results of operations constitutes management's review of the factors that affected the financial and operating performance for the fiscal years ended June 30, 2022 and 2021. This discussion should be read in conjunction with the financial statements and notes thereto contained elsewhere in this report. The Company has a June 30 fiscal year end.

Executive Summary

Xeriant, Inc. is dedicated to the acquisition, development and commercialization of transformative aerospace technologies, including eco-friendly specialty materials which can be successfully deployed and integrated across multiple industry sectors, and disruptive innovations related to the emerging aviation market called Advanced Air Mobility, which include next-generation aircraft. We seek to partner with and acquire strategic interests in visionary companies that accelerate this mission. The Company is located at the Research Park at Florida Atlantic University in Boca Raton, Florida.

JV with XTI Aircraft

On May 31, 2021, the Company entered into a Joint Venture Agreement (the “Agreement”) with XTI Aircraft Company (“XTI”), a Delaware corporation, to form a new company, called Eco-Aero, LLC (the “JV”), a Delaware limited liability company, with the purpose of completing the preliminary design of XTI’s TriFan 600, a 5-passenger plus pilot, hybrid electric, vertical takeoff, and landing (eVTOL) fixed wing aircraft. Under the Agreement, Xeriant is contributing capital, technology, and strategic business relationships, and XTI is contributing intellectual property licensing rights and know-how. XTI and the Company each own 50 percent of the JV. The JV is managed by a management committee consisting of five members, three appointed by the Company and two by XTI. The Agreement was effective on June 4, 2021, with an initial deposit of $1 million into the JV. Xeriant’s financial commitment is up to $10 million, contributed as needed based on the aircraft development timeline and budget.

The Company analyzed the transaction under ASC 810 Consolidation, to determine if the joint venture classifies as a Variable Interest Entity (“VIE”). The Joint Venture qualifies as a VIE based on the fact the JV does not have sufficient equity to operate without financial support from Xeriant. According to ASC 810-25-38, a reporting entity shall consolidate a VIE when that reporting entity has a variable interest (or combination of variable interests) that provides the reporting entity with a controlling financial interest on the basis of the provisions in paragraphs 810-10-25-38A through 25-38J. The reporting entity that consolidates a VIE is called the primary beneficiary of that VIE. According to the JV operating agreement, the ownership interests are 50/50. However, the agreement provides for a Management Committee of five members. Three of the five members are from Xeriant. Additionally, Xeriant has the right to invest up to $10,000,000 into the JV. As such, Xeriant has substantial capital at risk. Based on these two factors, the conclusion is that Xeriant is the primary beneficiary of the VIE. Accordingly, Xeriant has consolidated the VIE.

Recent Developments

JV with Movychem

On April 2, 2022 the Company entered into a Joint Venture Agreement with Movychem s.r.o., a Slovakian limited liability company setting forth the terms for the establishment of a joint venture (the “Joint Venture”) to develop applications and commercialize a series of flame-retardant products in the form of polymer gels, powders, liquids and pellets derived from technology developed by Movychem under the name Retacell^™. The Joint Venture is organized as a Florida limited liability company under the name Ebenberg, LLC and is owned 50% by each of the Company and Movychem.

For its capital contribution to the Joint Venture, pursuant to a Patent and Exclusive License and Assignment Agreement (the “Patent Agreement”), Movychem is transferring to the Joint Venture all of its interest to the know-how and intellectual property relating to Retacell exclusive of all patents, and the Company is contributing the amount of $2,600,000 payable (a) $600,000 at the rate of $25,000 per month over a 24 month period and (b) $2,000,000 within five business days of a closing of a financing in which the Company receives net proceeds of at least $3,000,000 but in no event later than six months from the Effective Date. At such time as the Company makes its $2,000,000 payment (and assuming the Company is current with its then monthly capital contributions), pursuant to the Patent Agreement, Movychem will transfer all of its rights, title and interest to all of the patents related to Retacell for an amount equal to aggregate cash contributions of the Company to the Joint Venture plus 40% of all royalty payments received by the Joint Venture for the licensing of Retacell products. Pending assignment of the patents to the Joint Venture, pursuant to the Patent Agreement, Movychem has granted to the Joint Venture an exclusive worldwide license under the patents.

Concurrently with the execution of the Joint Venture Agreement, the Joint Venture has entered into a Services Agreement (the “Services Agreement”) with the Company pursuant to which the Company will provide to the Joint Venture technical services related to the exploitation of the Retacell intellectual property and corporate, marketing. business development, communications and administrative services as requested by the Joint Venture in exchange for 40% of all royalty payments received by the Joint Venture for the licensing of Retacell products.

Under the Joint Venture Agreement, the Company has agreed to grant to certain individuals affiliated with Movychem five-year warrants (the “Warrants”) to purchase an aggregate of 170,000,000 shares of the Company’s common stock at an exercise price of $0.01 per share with vesting depending on the satisfaction of various milestones as described therein.

The Joint Venture Agreement grants to Movychem the right to dissolve the Joint Venture in the event that the Company fails to make any of its capital contributions in which case the Joint Venture will be required to grant back to Movychem all joint venture intellectual property and the assignment to Movychem of any outstanding licenses. Additionally, the Services Agreement will be amended to provide that the 40% of royalties to be paid by to the Company will be limited to licensees who were first introduced to the Joint Venture or Movychem, as the case may be.

The Company analyzed the transaction under ASC 810 Consolidation, to determine if the joint venture classifies as a Variable Interest Entity (“VIE”). The Joint Venture qualifies as a VIE based on the fact the JV does not have sufficient equity to operate without financial support from both parties. According to ASC 810-25-38, a reporting entity shall consolidate a VIE when that reporting entity has a variable interest (or combination of variable interests) that provides the reporting entity with a controlling financial interest on the basis of the provisions in paragraphs 810-10-25-38A through 25-38J. The reporting entity that consolidates a VIE is called the primary beneficiary of that VIE. According to the JV operating agreement, the ownership interests are 50/50 and the agreement provides for a Management Committee of five members. Two of the five members are from Xeriant and Movychem, respectively and one is appointed by mutual agreement of the parties. Movychem is transferring to the Joint Venture all of its interest to the know-how and intellectual property relating to Retacell exclusive of all patents, and the Company is contributing cash. As such, both parties do not have substantial capital at risk. Based on these two factors, the conclusion is that no one is the primary beneficiary of the VIE. Accordingly, Xeriant has not consolidated the VIE.

As of June 30, 2022, the Company paid $115,357 to the joint venture.

Stock Sales

During the year ended June 30, 2022, the Company received $2,207,050 by selling 43,675,266 shares common stock, which includes 4,308,600 shares issued based on the exercise of warrants.

Convertible Notes Issued

During the year ended June 30, 2022, the Company received $4,958,950 from issuance of convertible debt.

 Litigation

On September 1, 2021, Xeriant Inc. brought a cause of action in the Southern District of Florida against a former shareholder for claims, including but not limited to, breach of contract, misrepresentation, and asserting claims to recoup monetary and in-kind distributions made to the shareholder by the Company. The defendant submitted an affirmative defense and counterclaim on October 29, 2021.

Fiscal Year 2022 Results of Operations Compared with Fiscal Year 2021

Sales and marketing expenses

Total sales and marketing expenses were $651,567 and $1,047,120 for the fiscal years ended June 30, 2022 and 2021, respectively. During the fiscal year ended June 30, 2022 the Company’s sales and marketing expenses were associated with social media marketing campaigns, events and press releases.

General and administrative expenses

Total general and administrative expenses were $4,216,613 and $368,296 for the fiscal years ended June 30, 2022 and 2021, respectively. The change was primarily due to an increase in stock issuances related to consulting fees and advisory board fees, advisory board fees paid in cash, and an increase in travel, meetings, and conferences.

Professional Fees

Total professional fees were $444,012 and $190,693 for the fiscal years ended June 30, 2022 and 2021, respectively. The increase     was primarily due to legal fees.

Related Party Consulting Fees

Total related party consulting fees were $432,425 and $220,000 for the fiscal years ended June 30, 2022 and 2021, respectively. The related party consulting fees for fiscal year ended June 30, 2022 consisted of (i) $184,000 to Ancient Investments, LLC, a company owned by Keith Duffy, CEO and Scott Duffy, Executive Director of Operations, (ii) $86,000 for AMP Web Services, LLC, a company owned by Pablo Lavigna, CIO, $122,000 to Edward DeFeudis, Director, and (iii) $40,425 for Keystone Business Development Partners, LLC, a company owned by Brian Carey, CFO. The consulting fees for June 30, 2021 consisted of i) $98,000 to Ancient Investments, LLC, a company owned by Keith Duffy, CEO and Scott Duffy, Executive Director of Operations, (ii) $49,500 for AMP Web Services, LLC, a company owned by Pablo Lavigna, CIO, $40,000 to Edward DeFeudis, Director, and (iii) $20,000 for Keystone Business Development Partners, LLC, a company owned by Brian Carey, CFO.

Research and Development Expenses

Total research and development expenses were $5,267,581 and $373,112 for the fiscal years ended June 30, 2022 and 2021, respectively. These research and development expenses were in connection with our Eco-Aero, LLC joint venture with XTI Aircraft Company for funding the preliminary design phase in the development of an aircraft, called the TriFan 600.

Other Income (Expenses)

Total other expenses consist of amortization of debt discount related to convertible notes, interest expense related to convertible notes, and a loss on settlement of debt. Total other expenses were $4,869,997 for the year ended June 30, 2022 compared to $503,381 for the year ended June 30, 2021. The increase was primarily due to recording the amortization of debt discount from the convertible note signed for the year ended June 30, 2022 in the amount of $4,629,089.

Net loss

Total net loss was $15,882,195 for the year ended June 30, 2022 compared to $2,702,602 for the year ended June 30, 2021. The increase was primarily due to research and development expense and the cost of financings.

Liquidity and Capital Resources

As of June 30, 2022, we had a cash balance of $1,065,945 and a working deficit of $3,002,259. Our net loss of $15,882,195 in the year ended June 30, 2022 was mostly funded by proceeds raised from financings. We will need to raise working capital (or refinance existing short-term debt to long-term debt) to fund operations. Future equity financings may be dilutive to our stockholders. Alternative forms of future financings may include preferences or rights superior to our common stock. Debt financings may involve a pledge of assets and will rank senior to our common stock. We have historically financed our operations through best- efforts private equity and debt financings. We do not have any credit or equity facilities available with financial institutions, stockholders or third-party investors, and will continue to rely on best efforts financings. The failure to raise sufficient capital will likely cause us to cease operations.

During the fiscal year 2022, our operating activities used $6,927,249 of net cash compared to using $1,012,203 of net cash flow in our operating activities during fiscal year 2021. This difference primarily resulted from the increase of operations such as research and development expense of $5,267,581 and non-cash expense such as stock option expense of $3,248,181 and amortization of debt discount of $4,629,089.

Funding Strategy

To date, our operations have been funded primarily through private investors. Some of these investors have verbally committed additional funding for the Company, as needed. We have had a number of discussions with broker-dealers regarding the funding required to execute the Company’s business plan, which is to acquire and develop breakthrough technologies or business interests in those companies that have developed these technologies. We are in the process of issuing an offering document to obtain the funding for certain acquisitions that are in the discussion stages.

Off Balance Sheet Items

We do not have any off-balance sheet arrangements, financings, or other relationships with unconsolidated entities or other persons, also known as “special purpose entities” (SPEs).

Critical Accounting Policies

Basis of Presentation

The consolidated financial statements, which include the accounts of the Company and American Aviation Technologies, LLC, its subsidiary, and Eco-Aero, LLC, its joint venture, and are prepared in conformity with generally accepted accounting principles in the United States of America (U.S. GAAP). All significant intercompany balances and transactions have been eliminated. The consolidated financial statements, which include the accounts of the Company and its wholly owned subsidiary, and related disclosures have been prepared pursuant to the rules and regulations of the Securities and Exchange Commission (“SEC”). The Financial Statements have been prepared using the accrual basis of accounting in accordance with accounting principles generally accepted in the United States of America (“GAAP”) and presented in US dollars. The fiscal year end is June 30.

Principles of Consolidation

The consolidated financial statements include the accounts of Xeriant, Inc., and American Aviation Technologies, LLC, and Eco-Aero, LLC. All significant intercompany balances and transactions have been eliminated.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. The most significant assumptions and estimates relate to the valuation of beneficial conversion features and warrants associated with convertible debt. Actual results could differ from these estimates.

Stock-based Compensation

The Company measures the cost of employee services received in exchange for equity incentive awards based on the grant date fair value of the award. The Company uses the Black-Scholes valuation model to calculate the fair value of stock options granted to employees or consultants. Stock-based compensation expense is recognized over the period during which the employee is required to provide services in exchange for the award, which is usually the vesting period.

Fair Value Measurements and Fair Value of Financial Instruments

The Company adopted ASC Topic 820, Fair Value Measurements. ASC Topic 820 clarifies the definition of fair value, prescribes methods for measuring fair value, and establishes a fair value hierarchy to classify the inputs used in measuring fair value as follows:

Level 1: Inputs are unadjusted quoted prices in active markets for identical assets or liabilities available at the measurement date.

Level 2: Inputs are unadjusted quoted prices for similar assets and liabilities in active markets, quoted prices for identical or similar assets and liabilities in markets that are not active, inputs other than quoted prices that are observable, and inputs derived from or corroborated by observable market data.

Level 3: Inputs are unobservable inputs which reflect the reporting entity's own assumptions on what assumptions the market participants would use in pricing the asset or liability based on the best available information.

The estimated fair value of certain financial instruments, including all current liabilities are carried at historical cost basis, which approximates their fair values because of the short-term nature of these instruments.

Deferred Taxes

The Company follows Accounting Standards Codification subtopic 740-10, Income Taxes ("ASC 740-10") for recording the provision for income taxes. Deferred tax assets and liabilities are computed based upon the difference between the financial statement and income tax basis of assets and liabilities using the enacted marginal tax rate applicable when the related asset or liability is expected to be realized or settled. Deferred income tax expenses or benefits are based on the changes in the asset or liability during each period. If available evidence suggests that it is more likely than not that some portion or all of the deferred tax assets will not be realized, a valuation allowance is required to reduce the deferred tax assets to the amount that is more likely than not to be realized. Future changes in such valuation allowance are included in the provision for deferred income taxes in the period of change. Deferred income taxes may arise from temporary differences resulting from income and expense items reported for financial accounting and tax purposes in different periods.

Deferred taxes are classified as current or non-current, depending on the classification of assets and liabilities to which they relate. Deferred taxes arising from temporary differences that are not related to an asset or liability are classified as current or non-current depending on the periods in which the temporary differences are expected to reverse and are considered immaterial. As of June 30, 2022 there are no deferred tax assets.

Cash and Cash Equivalents

For purposes of the Statements of Cash Flows, the Company considers highly liquid investments with an original maturity of three months or less to be cash equivalents. The Company has no cash equivalents.

Accounts Receivable and Allowance for Doubtful Accounts

The Company monitors outstanding receivables based on factors surrounding the credit risk of specific customers, historical trends, and other information. The allowance for doubtful accounts is estimated based on an assessment of the Company's ability to collect on customer accounts receivable. There is judgment involved with estimating the allowance for doubtful accounts and if the financial condition of the Company's customers were to deteriorate, resulting in their inability to make the required payments, the Company may be required to record additional allowances or charges against revenues. The Company writes off accounts receivable against the allowance when it determines a balance is uncollectible and no longer actively pursues its collection. The allowance for doubtful accounts is created by forming a credit balance which is deducted from the total receivables balance in the balance sheet. As of June 30, 2022 and 2021 there are no accounts receivable.

Convertible Debentures

If the conversion features of conventional convertible debt provide for a rate of conversion that is below market value at issuance, this feature is characterized as a beneficial conversion feature ("BCF"). A BCF is recorded by the Company as a debt discount pursuant to ASC Topic 470-20 "Debt with Conversion and Other Options." In those circumstances, the convertible debt is recorded net of the discount related to the BCF, and the Company amortizes the discount to interest expense, over the life of the debt. During the year ended June 30, 2022, the Company recorded a BCF in the amount of $2,615,419.

Fair Value of Financial Instruments

Accounting Standards Codification subtopic 825-10, Financial Instruments ("ASC 825-10") requires disclosure of the fair value of certain financial instruments. The carrying value of cash, accounts payable and accrued liabilities as reflected in the balance sheets, approximate fair value because of the short-term maturity of these instruments. All other significant financial assets, financial liabilities and equity instruments of the Company are either recognized or disclosed in the financial statements together with other information relevant for making a reasonable assessment of future cash flows, interest rate risk and credit risk. Where practicable the fair values of financial assets and financial liabilities have been determined and disclosed; otherwise only available information pertinent to fair value has been disclosed.

The Company follows Accounting Standards Codification subtopic 820-10, Fair Value Measurements and Disclosures ("ASC 820-10") and Accounting Standards Codification subtopic 825-10, Financial Instruments ("ASC 825-10"), which permits entities to choose to measure many financial instruments and certain other items at fair value.

Research and Development Expenses

Expenditures for research and development are expensed as incurred. The Company incurred research and development expenses of $5,267,581 and $373,112 for the years ended June 30, 2022 and 2021, respectively.

Advertising, Marketing and Public Relations

The Company expenses advertising and marketing costs as they are incurred. The Company recorded advertising expenses in the amount of $651,567 and $1,047,120 for the years ended June 30, 2022 and 2021, respectively.

Offering Costs

Costs incurred in connection with raising capital by the issuance of common stock are recorded as contra equity and deducted from the capital raised. There were no offering costs for the years ended June 30, 2022 and 2021, respectively.

Income Taxes

The Company recognizes the effect of income tax positions only if those positions are more likely than not of being sustained. Recognized income tax positions are measured at the largest amount that is greater than 50% likely of being realized. Changes in recognition or measurement are reflected in the period in which the change in judgment occurs. The Company records interest and penalties related to unrecognized tax benefits as a component of general and administrative expenses. Our consolidated federal tax return and any state tax returns are not currently under examination.

The Company has adopted FASB ASC 740-10, Accounting for Income Taxes, which requires an asset and liability approach to financial accounting and reporting for income taxes. Deferred income tax assets and liabilities are computed annually from differences between the financial statement and tax basis of assets and liabilities that will result in taxable or deductible amounts in the future based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be realized.

Recent Accounting Pronouncements

The Company has implemented all new accounting pronouncements that are in effect. These pronouncements did not have any material impact on the consolidated financial statements unless otherwise disclosed, and the Company does not believe that there are any other new accounting pronouncements that have been issued that might have a material impact on its financial position or results of operations.

Item 8. Financial Statements and Supplementary Data

XERIANT, INC.

CONSOLIDATED FINANCIAL STATEMENTS

JUNE 30, 2022 and 2021

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Report of Independent Registered Public Accounting Firm

To the shareholders and the board of directors of Xeriant, Inc.

Opinion on the Financial Statements

We have audited the accompanying balance sheets of Xeriant, Inc. (the "Company") as of June 30, 2022 and 2021 the related statements of operations, stockholders’ equity (deficit), and cash flows for the years ended June 30, 2022 and 2021, and the related notes (collectively referred to as the "financial statements"). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of June 30, 2022 and 2021, and the results of its operations and its cash flows for the years ended June 30, 2022 and 2021, in conformity with accounting principles generally accepted in the United States.

Substantial Doubt about the Company’s Ability to Continue as a Going Concern

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 11 to the consolidated financial statements, the Company’s significant operating losses raise substantial doubt about its ability to continue as a going concern. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Creation of Variable Interest Entity

As described in Note 3 to the consolidated financial statements, management applied FASB Topic 810, Consolidation (“ASC 810”) to recognize if a Joint Venture (“JV”) classifies as a Variable Interest Entity (“VIE”). Management recognizes a VIE when the Company has a controlling financial interest in the VIE and, thus, is the VIE’s primary beneficiary. The Company’s assessment includes determining the characteristics of the reporting entity’s variable interest(s) and other involvements (including involvement of related parties and de facto agents), if any, in the VIE, as well as the involvement of other variable interest holders. Additionally, the assessment, considers the VIE’s purpose and design, including the risks that the VIE was designed to create and pass through to its variable interest holders.

The principal considerations for our determination that performing procedures over determination if a VIE relationship exits is a critical audit matter as there are more significant risks associated with no recognition of. This in turn led to significant effort in performing our audit procedures which were designed to evaluate whether the beneficiary has the power, through voting rights or similar right, to direct the activities of an entity that most significantly impact the entity’s economic performance, the obligation to absorb the expected losses of the entity and the right to receive the expected residual returns of the entity were appropriately considered by management under ASC 810.

Our audit procedures included, among others, determining the activities that most significantly affect the VIE’s economic performance and the Company retaining the power to most affect those activities, whether the Company’s economic interest, including its obligation to absorb losses or receive benefits, “is disproportionately greater than its power to direct the activities of the VIE that significantly influence its economic performance and if the JV has sufficient equity to operate without financial support from the Company.

The accompanying notes are an integral part of these consolidated financial statements.

XERIANT, INC.  

CONSOLIDATED STATEMENTS OF OPERATIONS

XERIANT, INC.

CONSOLIDATED STATEMENT OF CHANGES IN STOCKHOLDERS' DEFICIT

FOR THE YEARS ENDED JUNE 30, 2022 AND 2021