Lumentum (LITE) 10-K2021 FY Annual report

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definition of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Portions of the information called for by Part III of this Annual Report on Form 10-K is hereby incorporated by reference from the definitive proxy statement for the Registrant’s annual meeting of stockholders, which will be filed with the Securities and Exchange Commission not later than 120 days after the Registrant’s fiscal year ended July 3, 2021.

FORWARD-LOOKING STATEMENTS

PART I

Lumentum Holdings Inc. (“we,” “us,” “our”, “Lumentum” or the “Company”) is an industry-leading provider of optical and photonic products defined by revenue and market share addressing a range of end market applications including Optical Communications (“OpComms”) and Commercial Lasers (“Lasers”) for manufacturing, inspection and life-science applications. We seek to use our core optical and photonic technology, and our volume manufacturing capability, to expand into attractive emerging markets that benefit from advantages that optical or photonics-based solutions provide, including 3D sensing for consumer electronics and diode light sources for a variety of consumer and industrial applications. The majority of our customers tend to be original equipment manufacturers (“OEMs”) that incorporate our products into their products which then address end-market applications. For example, we sell fiber optic components that network equipment manufacturers (“NEMs”) assemble into communications networking systems, which they sell to network service providers, operators or enterprises with their own networks. Similarly, many of our customers for our Lasers products incorporate our products into tools they produce, which are used for manufacturing processes by their customers. For 3D sensing, we sell diode lasers to manufacturers of consumer electronics products for mobile, personal computing, gaming, and to manufacturers of emerging automotive and industrial applications who then integrate our devices within their products.

We operate in two reportable segments: OpComms and Lasers.

Lumentum was incorporated in Delaware as a wholly owned subsidiary of JDS Uniphase Corporation (“JDSU”) on February 10, 2015. In August 2015, we were spun-off from JDSU (the “Separation”) and became an independent publicly-traded company through the distribution of our common stock by JDSU to its stockholders (the “Separation”). In 2015, JDSU was renamed Viavi Solutions Inc. (“Viavi”). Our business traces its origins to Uniphase Corporation, which was formed in 1979, and became publicly traded in 1992. Uniphase was originally a supplier of commercial lasers, and later, a leading supplier of optical transmission products. In 1999, JDS Fitel Inc., a pioneer in products for fiber optic networking which was formed in 1981, merged with Uniphase to become JDSU, a global leader in optical networking. Subsequent acquisitions by JDSU broadened the depth and breadth of the OpComms and Lasers businesses, as well as the intellectual property, technology and product offerings, of what is now Lumentum. Notable amongst these acquisitions in the OpComms business were Agility Communications, Inc. in 2005 and Picolight, Inc. in 2007 which respectively brought widely tunable, long wavelength laser technology for metro and long haul networking applications and short wavelength vertical-cavity surface-emitting lasers (“VCSELs”) for enterprise, datacenter networking, and 3D sensing applications. The fundamental laser component technologies which we acquired through these acquisitions, form the basis of optical networks today, and we believe will continue to do so for the foreseeable future. These technologies will enable us to develop highly integrated products to satisfy our communications customers’ ever-increasing needs for smaller, lower power and lower cost optical products. Notable acquisitions in the Lasers business were Lightwave Electronics Corporation in 2005 and Time-Bandwidth Products Inc. (“Time-Bandwidth”) in 2014. Both of these Lasers acquisitions brought high power pulsed solid-state laser products and technology to our business, which address the micro laser machining market and expanded our addressable market. In December 2018, we completed the acquisition of (“Oclaro”), a provider of optical components and modules for the long-haul, metro and data center markets. Oclaro’s products provide differentiated solutions for optical networks and high-speed interconnects driving the next wave of streaming video, cloud computing, application virtualization and other bandwidth-intensive and high-speed applications. This acquisition strengthened our product portfolio, by adding Oclaro’s indium phosphide laser and photonic integrated circuit and coherent component and module capabilities which broadened our revenue mix; and positions us strongly to meet the future needs of our customers.

Our business is driven by end-market applications which benefit from the performance advantages of optical and photonics solutions.

The OpComms markets we serve are experiencing continually increasing needs for higher data transmission speeds, fiber optic network capacity and network agility. This is driven by rapid growth in both the number of higher bandwidth broadband applications such as high-definition video, online gaming, cloud computing and the number and scale of datacenters that require fiber optic links to enable the higher speeds and increased scale necessary to deliver high bandwidth video and other services. Our technology, which was originally developed for communications applications is also finding use in other emerging market opportunities including 3D sensing applications that employ our laser technology in mobile devices, computers, augmented and virtual reality and other consumer electronics devices. Additionally, our products are being designed into emerging automotive, industrial, security, safety and surveillance applications.

In the Lasers markets, customer demand is driven by the need to enable faster, higher precision volume manufacturing techniques with lower power consumption, more environmentally friendly, reduced manufacturing footprint and increased productivity. These capabilities are critical as industries develop products that are smaller and lighter, increasing productivity and yield and lowering their energy consumption. Our optical and laser solutions, developed in close collaboration with OEM partners, are well-positioned to meet demand resulting from these trends. We do, however, expect to continue to encounter a number of industry and market risks and uncertainties. These risks and uncertainties may limit our visibility, and consequently, our ability to predict future revenue, profitability and general financial performance, and could create quarter over quarter variability in our financial measures. For example, the demand environment coupled with changing export regulations with China have fluctuated significantly in recent years, and has created volatility and uncertainty in our future demand. We cannot predict when or to what extent these uncertainties will be resolved. Our revenues, profitability and general financial performance may also be affected by: (i) pricing pressures, particularly within our OpComms markets, due to, among other things, a highly concentrated customer base, increasing competition, particularly from Asia-Pacific-based competitors, and a general commoditization trend for certain products; (ii) high product mix variability which affects revenue and gross margin; (iii) fluctuations in customer buying patterns, which cause volatility in demand, revenue and profitability; (iv) the current trend of communication industry consolidation and vertical integration, which is expected to continue, that directly affects our customer base and adds additional risk and uncertainty to our financial and business projections; (v) China’s on-going transition to a more localized supply chain; and (vi) ongoing risks related to the economic impact of the COVID-19 pandemic, including component shortages that may impact our ability to supply products.

The COVID-19 pandemic has caused public health officials to recommend, and governments to enact, precautions to mitigate the spread of the virus, including travel restrictions and bans, extensive social distancing guidelines, closure or restrictions on business and quarantine or other types of “shelter-in-place” orders in many regions of the world. The pandemic and these related responses have caused, and may continue to cause a global slowdown of economic activity (including a decrease in demand for a broad variety of goods and services), disruptions in global supply chains and significant volatility and potential disruption of financial markets. We have adopted several measures in response to the COVID-19 outbreak including complying with local, state or federal orders that require employees to work from home, instructing employees to work from home in certain jurisdictions, limiting the number of employees onsite which slowed our manufacturing operations in certain countries, enhanced use of personal protective equipment and restricting non-critical business travel by our employees.

In the geographies we have operations, we have, in general, been deemed an essential business and been permitted to continue manufacturing and new product development operations in a more limited capacity during the pandemic. This stems from our critical role in global supply chains for the world’s communications and health-care systems. Given the continually evolving situation, it is difficult to predict the magnitude and duration of the impact of the COVID-19 pandemic to our markets or precisely when our ability to supply our products will return to full capacity. We are continuing to actively monitor the situation and may take further actions altering our business operations that we determine are in the best interests of our employees, customers, communities, business partners, suppliers, and stockholders, or as required by federal, state, or local authorities. It is not clear what the potential effects any such alterations or modifications may have on our business, including the effects on our customers, employees, and prospects, or on our financial results going forward.

Our primary strategic focus for several years has been technology and product leadership combined with close customer relationships in long-term healthy and growing markets. We believe this strategy is even more apt, and our long-term opportunity is not diminished, with COVID-19. We believe there are be long-term opportunities, as the world’s experience with COVID-19 is driving an increasingly digital and virtual world touching all aspects of life and work that increasingly emphasizes communications systems, cloud services, augmented and virtual reality, and enhanced security. Additionally, ever-advancing electronic devices are needed to consume, produce, and communicate digital and virtual content. All these trends could drive the need for higher volumes of higher performing optical devices that we could supply. As such, we expect to continue to invest strongly in new products, technology, and customer programs.

On January 18, 2021, Lumentum and Coherent, Inc. (“Coherent”) entered into a merger agreement (the “merger agreement”), under which Lumentum would acquire all outstanding shares of Coherent common stock. As of the date of the merger agreement, the total transaction consideration was approximately $5.7 billion. In March 2021, Coherent terminated the merger agreement and paid Lumentum a termination fee of $217.6 million in accordance with the merger agreement. This gain was offset by $10.1 million of acquisition related expenses and the net amount is presented as “merger termination fee and related costs, net” in our Consolidated Statement of Operations for the year ended July 3, 2021.

We have two operating segments, OpComms and Lasers. The two operating segments were primarily determined based on how our Chief Operating Decision Maker (“CODM”) views and evaluates our operations. Operating results are regularly reviewed by our CODM to make decisions about resources to be allocated to the segments and to assess their performance. Other factors, including market separation and customer specific applications, go-to-market channels, products and manufacturing, are considered in determining the formation of these operating segments. We do not track our property, plant, and equipment by operating segments. For the geographic identification of these assets and for further information regarding our operating segments, refer to “Note 20. Operating Segments and Geographic Information”.

Our OpComms products address the following markets: telecommunications (“Telecom”), data communications (“Datacom”) and consumer and industrial (“Consumer and Industrial”).

Our OpComms products include a wide range of components, modules and subsystems to support customers including carrier networks for access (local), metro (intracity), long-haul (city-to-city and worldwide) and submarine (undersea) applications. Additionally, our products address enterprise, cloud, and data center applications, including storage-access networks (“SANs”), local-area networks (“LANs”) and wide-area networks (“WANs”). These products enable the transmission and transport of video, audio and data over high-capacity fiber-optic cables. We maintain leading positions in these fast growing OpComms markets through our extensive product portfolio, including reconfigurable optical add/drop multiplexers (“ROADMs”), coherent dense wavelength division multiplexing (“DWDM”) pluggable transceivers, and tunable small form-factor pluggable transceivers. We also sell laser chips for use in manufacturing of high-speed Datacom transceivers.

In the Consumer and Industrial market, our OpComms diode laser products include vertical cavity surface emitting lasers (“VCSELs”) and edge emitting lasers. In the Consumer end-market, our laser light sources are integrated into 3D sensing cameras which are used in applications in mobile devices, gaming, payment kiosks, computers, and other consumer electronics devices. Applications include biometric identification, computational photography, virtual and augmented reality, and natural user interfaces. Emerging applications for our lasers include automotive safety systems, LiDAR for advanced driver assistance systems in automobiles and autonomous vehicles, self-navigating robotics and drones in industrial applications, and 3D capture of objects coupled with 3D imaging or printing. In the industrial end-market, our diode lasers are used primarily as pump sources for pulsed and kilowatt class fiber lasers.

Our OpComms customers include Alphabet, Apple, Ciena, Cisco Systems (which acquired Acacia Communications on March 1, 2021, another customer of ours), Huawei Technologies (including HiSilicon), Infinera, Innolight, NEC, Nokia Networks (including Alcatel-Lucent International), and ZTE. During fiscal 2021, 2020, and 2019, net revenue generated from a single customer which represented 10% or more of our total net revenue of the applicable fiscal year is summarized in the table below:

We believe the optical communications market has started to expand beyond a small number of very large service providers, and is transitioning to a variety of open and captive networks created for in-house use by large video services, search engines and companies offering a variety of cloud computing services. We believe that the trend towards an increase in demand for optical solutions, which increase network capacity, is in response to growing bandwidth demand driven by increased transmission of video, voice and data over optical communications networks. Additionally, service providers also seek to decrease the total cost of ownership of their networks. To remain competitive, network operators worldwide must offer broader suites of digital services at competitive prices. To do this, they are migrating to Internet-protocol (“IP”) networks and expanding long-haul, metro regional and metro access networks, which effectively deliver broadband services, while lowering capital and operating costs of dense-wavelength-division multiplexing networks.

The growing demand for capacity encourages the adoption of OpComms products across the Datacom and Telecom markets. Demand for capacity in the Datacom market is driven by the growing needs of LANs and WANs. Growth in Datacom is also driven by web and cloud services companies that are expanding data center infrastructure, increasing the need for network capacity within and between these data centers.

Demand in the Telecom market is driven by new bandwidth-intensive applications that can result in sudden and severe changes in demand almost anywhere on the network. Increasing agility in optical networks by employing ROADMs, wavelength selective switches, wavelength tunable transmission products and other agile optical products provides an effective way to respond to unpredictable bandwidth demands and to manage expenses. With more agile optical networks, a network operator can add capacity by using remote management applications rather than dispatching technicians to perform manual operations in the field.

In addition, the high-end routers, switches and cross-connect equipment that must handle legacy and internet-protocol traffic are becoming increasingly complex in order to meet higher bandwidth, scalability, speed and reliability needs. Products must provide higher levels of functionality and performance in compact designs that must also meet requirements for quality, reliability, and cost.

We believe increasing speeds at the edge of the network, including the significant increase in speed in 5G mobile networks, combined with increasing demand for high bandwidth applications and services, including streaming video, will result in increasing demand for additional capacity in datacenter interconnect, metro regional and long-haul networks. The dynamically reconfigurable nature of today’s networks enables lower operating costs and other competitive advantages, allowing communications service providers to use and scale network capacity more flexibly, streamline service provisioning, accelerate rerouting around points of failure and modify network topology through simple point-and-click network management systems.

Our optical products are well-positioned to meet these demands. Our innovations, particularly in the area of photonic integration, have resulted in products that have more functionality, are significantly smaller in size, require less power, and are more cost-effective than our historical products. Higher levels of integration have also led to development of our Super Transport Blade, which delivers all transport functions (wavelength switching, pre-amplification, post-amplification, optical supervisory channel and monitoring) in a single, integrated platform, essentially replacing three blades with one.

Offerings

In addition to a full selection of active and passive components, we offer increasing levels of functionality and integration in modules, circuit packs and subsystems for transmission, amplification, wavelength management and more.

In the Telecom market, we provide transmission and transport solutions for optical networks that make up the backbone of the wireline Telecom infrastructure, thereby enabling the internet, connections between cloud datacenters, and backhaul of data from wireless mobile networks. Transmission products, such as our tunable transponder, transceiver and transmitter modules, transmit and receive high-speed data signals at the ingress/egress points of networks. These products use dense wavelength division multiplexing technology to maximize the fiber transmission capacity while lowering the cost per bit to meet the needs of increasing internet and cloud demand. We also offer components including tunable lasers, receivers and modulators to address the higher end of these same network applications.

Our transport products, such as ROADMs, amplifiers and optical channel monitors provide switching, routing and the conditioning of signals. We also make components for transport, including 980nm, multi-mode and Raman pumps for optical amplifiers, and passive components. Passive components include switches, attenuators, photodetectors, gain flattening filters, isolators, wavelength-division multiplexing (“WDM”) filters, arrayed waveguide gratings (“AWGs”), multiplex/de-multiplexers and integrated passive modules.

Our innovation led to the Super Transport Blade, which integrates all major optical transport functions into a single-slot blade. This all-in-one solution reduces the size, cost and power requirements of optical components, incorporates nano wavelength selective switch technology and enables greater chassis density and a smaller footprint.

In the Datacom market, optical transceivers are used to connect servers, switches, routers and other information technology infrastructure critical for today’s internet applications, web services, video streaming, enterprise networks and service provider solutions. The cloud data center market is one of the fastest growing segments in optical communications both in terms of network equipment investments and increasing volumes of higher speed optical transceivers. Additionally, the increased bandwidth needs of 5G wireless applications will drive growth in the volumes of high speed optical transceivers. Historically, we have supplied optical transceivers, but we have shifted our strategy to supplying the underlying optical components, high-speed source lasers and receiver photo diodes used in optical transceivers to address these market segments.

For the 100G and higher data rates, we offer several source laser technologies to balance technical and commercial requirements. For high volume, short distance applications we developed our VCSELs. VCSELs are ideal for short reach applications because they enable low power, low cost optical solutions that are highly scalable. For high-performance, longer distance applications we have our directly modulated laser (“DML”) and electro-absorption modulated laser (“EML”) dies supporting module applications with speeds from 10Gb/s through 800Gb/s. Our individual lasers and compact laser arrays offer an innovative solution for the LANs, SANs, broadband Internet, 5G Wireless and metro-area network as well as hyperscale datacenter applications.

Our 3D sensing technology enables real time depth information to any photo or video image. This represents a fundamental transition for image capture akin to the transition from monochrome to color and gives devices the ability to see the world around them in three dimensions. The immediate applications include full body imaging for gaming, 3D scanning for space mapping, computational photography and facial recognition for security. Emerging applications for this technology include various mobile device applications, autonomous vehicles, self-navigating robotics and drones in industrial applications and 3D capture of objects coupled with 3D printing. 3D sensing can be applied to any device with a camera. The technologies to achieve accurate and stable 3D sensing are converging to laser based solutions. We are a leading supplier of the critical laser illumination sources for 3D sensing systems being used in applications for gaming, computing, mobile devices, and home entertainment.

Strategy

In our OpComms segment, we are focused on technology leadership through innovation with our customers, cost leadership and functional integration. We endeavor to align the latest technologies with industry leading, scalable manufacturing and operations to drive the next phase of optical communications technologies and products for Telecom and Datacom applications that are faster, more energy efficient, more agile and more reliable, making us a valuable business and technology partner for NEMs, consumer electronic companies, cloud service providers and data center operators.

Competition

We compete against various companies in the markets we serve, including II-VI, Acacia Communications (which was acquired by Cisco in March 2021), Accelink, ams AG, Broadcom Inc., Furukawa Electric, Mitsubishi Electric, Neophotonics, and Sumitomo Electric Industries, as well as, private companies and subsidiaries of public companies providing optical communications components such as Fujitsu Optical Components - a subsidiary of Fujitsu, Nistica - a subsidiary of Molex, and O-Net.

Our Lasers products serve our customers in markets and applications such as sheet metal processing, general manufacturing, biotechnology, graphics and imaging, remote sensing, and precision machining such as drilling in printed circuit boards, wafer singulation, glass cutting and solar cell scribing.

Our Lasers products are used in a variety of OEM applications including diode-pumped solid-state, fiber, diode, direct-diode and gas lasers such as argon-ion and helium-neon lasers. Fiber lasers provide kW-class output powers combined with excellent beam quality and are used in sheet metal processing and metal welding applications. Diode-pumped solid-state lasers provide excellent beam quality, low noise and exceptional reliability and are used in biotechnology, graphics and imaging, remote sensing, materials processing and precision machining applications. Diode and direct-diode lasers address a wide variety of applications, including laser pumping, thermal exposure, illumination, ophthalmology, image recording, printing, plastic welding and selective soldering. Gas lasers such as argon-ion and helium-neon lasers provide a stable, low-cost and reliable solution over a wide range of operating conditions, making them well-suited for complex, high-resolution OEM applications such as flow cytometry, DNA sequencing, graphics and imaging and semiconductor inspection.

We also provide high-powered and ultrafast lasers for the industrial and scientific markets. Manufacturers use high-power, ultrafast lasers to create micro parts for consumer electronics and to process semiconductor, LED, and other types of chips. Use of ultrafast lasers for micromachining applications is being driven primarily by the increasing use of consumer electronics and connected devices globally.

Our portfolio of Lasers products includes components and subsystems used in a variety of OEM applications that range in output power from milliwatts to kilowatts and include ultraviolet, visible and infrared wavelengths. We support customer applications in the biotechnology, graphics and imaging, remote sensing, materials processing and other precision machining areas.

Our Lasers customers include Amada, ASML Holding, Beckman Coulter, DISCO, Electro Scientific Industries (acquired by MKS Instruments in February 2019), Han’s Laser Technology, KLA-Tencor, Lasertec, Life Technologies, and NR Electric. During fiscal 2021, 2020, and 2019, we did not have any single customer attributable to our Lasers segment that generated net revenue of 10% or more of our total net revenue for the applicable fiscal year.

Trends

As technology advances, industries such as consumer electronics manufacturing increasingly turn to lasers when they need more precision, higher productivity and energy efficient, or “green,” alternatives for problems that cannot be solved by mechanical, electronic or other means. For example, these industries are using lasers to develop products that are smaller and lighter to increase productivity and yield and to lower their energy consumption. Lasers have been used for years to help achieve the scale and precision needed in semiconductor processing. In biotech applications, lasers have been instrumental for advances (and new standard procedures) in cytology, hematology, genome sequencing and crime scene investigations, among others. We believe the long-term trends in these industries will likely lead to increased demand for lasers.

Sheet metal processing and metal welding applications are increasingly using kW-class fiber lasers instead of kW-class CO2 lasers. Fiber lasers generate higher productivity at lower cost in such applications because they exhibit lower power consumption, better quality and generally lower user maintenance costs.

In addition, demand continues for electronic products, as well as products and components in other industries, with greater functionality while becoming smaller, lighter and less expensive. Innovative next generation product designs require precise micromachining and materials processing, such as micro bending, soldering and welding. At the scale and processing speed needed, lasers are replacing mature mechanical tools such as drills for minute holes, or “vias,” in printed circuit boards and saws and scribes for singulation of silicon wafers, resulting in greater precision and productivity. As these trends continue, we

believe that manufacturers and other industries will increase their reliance on lasers in order to maintain or increase their competitiveness.

We believe we are well-positioned with key OEM providers of laser solutions to these industries. We continue to develop our laser portfolio to offer smaller, more energy efficient and more cost-effective products designed specifically for the performance, integration, reliability and support needs of our OEM customers.

Our broad range of Lasers products includes diode-pumped solid-state, fiber, diode, direct-diode and gas lasers such as argon-ion and helium-neon lasers. Diode-pumped solid-state and fiber lasers that provide excellent beam quality, low noise and exceptional reliability are used in biotechnology, graphics and imaging, remote sensing, materials processing and precision machining applications. Diode and direct-diode lasers address a wide variety of applications, including laser pumping, thermal exposure, illumination, ophthalmology, image recording, printing, plastic welding and selective soldering. Gas lasers such as argon-ion and helium-neon lasers provide a stable, low-cost and reliable solution over a wide range of operating conditions, making them well suited for complex, high-resolution OEM applications such as flow cytometry, DNA sequencing, graphics and imaging and semiconductor inspection.

Strategy

In our Lasers segment, we leverage our long-term relationships with OEM customers to drive commercial laser innovation. Using established manufacturing, engineering, lasers and photonics expertise, we deliver products that meet cost-of-ownership and reliability needs while delivering on volume production demands.

Competition

We compete against various public and private companies in the commercial laser markets we serve including Coherent (which has entered into a merger agreement with II-VI), IPG Photonics, MKS Instruments, and TRUMPF Group.

We evaluate strategic opportunities regularly and, where appropriate, may acquire additional businesses, products, or technologies that are complementary to, or broaden the markets for our products. We believe we have strengthened our business model by expanding our addressable markets, customer base and expertise, diversifying our product portfolio and fortifying our core businesses from acquisitions as well as through organic initiatives.

On December 10, 2018, we completed our merger with Oclaro, a provider of optical components and modules for the long-haul, metro and data center markets. Oclaro’s products provide differentiated solutions for optical networks and high-speed interconnects driving the next wave of streaming video, cloud computing, application virtualization and other bandwidth-intensive and high-speed applications. This acquisition strengthened our product portfolio, including gaining Oclaro’s indium phosphide laser and photonic integrated circuit and coherent component and module capabilities; broadens our revenue mix; and positions us strongly to meet the future needs of our customers. Refer to “Note 4. Business Combinations” for further discussion of the merger.

We devote substantial resources to research and development (“R&D”) for the development of new and enhanced products to serve our markets. Once the design of a product is complete, our engineering efforts shift to enhancing both product performance and our ability to manufacture it in greater volume and at lower cost.

In our Lasers segment, we continue to develop new product offerings in both solid-state and fiber lasers that take advantage of technologies and components we develop. These products are targeted at serving customers engaging in biotechnology, graphics and imaging, remote sensing, and materials processing and precision micromachining markets.

We use a combination of contract manufacturers and our own manufacturing facilities. Our significant manufacturing facilities are located in the United States, Thailand, China, the United Kingdom, Slovenia, and Japan.

In fiscal 2021, we transitioned manufacturing of our backend wafer and test products from San Jose, California to our other manufacturing operations. We also ceased manufacturing certain of our specialty products in San Jose, transferring the raw materials back to the customer.

In fiscal 2020, as part of our plan to discontinue development and manufacturing of Lithium Niobate modulators, we sold the assets associated with certain Lithium Niobate product lines manufactured by our San Donato, Italy site. In fiscal 2021, development and manufacturing were discontinued in our San Jose, California manufacturing locations.

In fiscal 2020, we discontinued the development and manufacturing of future Datacom transceiver modules which impacted the California and China based Datacom module teams. This affected manufacturing in our Thailand factory as well. While we expect strong growth in Datacom volumes in the future, the market at the transceiver level is gross margin challenged due to extreme competition. Following the Oclaro acquisition, we have a differentiated leadership position across a range of photonic chips on which the Datacom, wireless, and access markets critically rely.

In our fiscal fourth quarter of 2019, we moved into our Slovenia factory, which is now fully operational.

Our significant contract manufacturing partners are located primarily in Thailand, Taiwan and Malaysia. We rely on the capabilities of our contract manufacturers to procure components and manage the inventory in these locations.

We use various suppliers and contract manufacturers to supply parts and components for manufacturing and support of multiple product lines. Although our intention is to establish at least two sources of supply for materials whenever possible, for certain components we have sole or limited source supply arrangements. We may not be able to procure these components from alternative sources at acceptable prices and quality within a reasonable time, such as the current shortages in semiconductor components, or at all; therefore, the risk of loss or interruption of such arrangements could impact our ability to deliver certain products on a timely basis.

Our revenue may be influenced on a quarter to quarter basis by customer demand patterns and new product introductions. Some of our products may be incorporated into consumer electronic products, which are subject to seasonality and fluctuations in demand.

Backlog consists of purchase orders for products for which we have assigned shipment dates.

As of July 3, 2021 and June 27, 2020, our backlog was $521.1 million and $557.8 million, respectively. Due to possible changes in product delivery schedules and cancellation of product orders, and because our sales often reflect orders shipped in the same quarter in which they are received, our backlog at any particular date is not necessarily indicative of actual revenue or the level of orders for any succeeding period. A portion of our revenue arises from vendor-managed inventory arrangements where the timing and volume of customer utilization is difficult to predict.

We believe that the future performance of our Company relies upon the strength of our employees, and our ability to recruit and retain the services of executive, engineering, sales and marketing, and support personnel is critical to our success. We believe that our employee relations are good.

Diversity, Inclusion & Belonging

As a global and multicultural company driven by innovation, Lumentum is building a diverse and inclusive culture where differences are valued, and employees feel they belong. Lumentum’s focus on diversity, inclusion, and belonging is felt across the entire organization. We are committed to creating a diverse and welcoming workplace that includes employees with diverse backgrounds and experiences. Lumentum believes that employee and thought diversity delivers more innovation and ultimately better business results.

As part of our efforts to ensure Lumentum’s practices support a culture of diversity, we are committed to ensuring pay equity as a standard global practice, increasing the representation of underrepresented populations, increasing the percentage of women in senior leadership positions, and developing a pipeline of future leaders through our early hire initiatives for new employees. Our work is driven by a Diversity, Inclusion and Belonging Council represented by all business units and functions and employee resource groups supporting women, early career hires, Black, Asian American and Pacific Islander (AAPI), and our Latinx employees.

Our business activities are international and subject us to various federal, state, local and foreign laws in the countries in which we operate, and our products and services are subject to laws and regulations affecting the sale of our products.

Environment

Our R&D, manufacturing and distribution operations involve the use of hazardous substances and are regulated under international, federal, state and local laws governing health and safety and the environment. We apply strict standards for protection of the environment and occupational health and safety to sites inside and outside the United States, even if not subject to regulation imposed by foreign governments. We believe that our properties and operations at our facilities comply in all material respects with applicable environmental laws and occupational health and safety laws. However, the risk of environmental liabilities cannot be completely eliminated and there can be no assurance that the application of environmental and health and safety laws will not require us to incur significant expenditures. We are also regulated under a number of international, federal, state and local laws regarding recycling, product packaging and product content requirements. The environmental, product content/disposal and recycling laws are gradually becoming more stringent and may cause us to incur significant expenditures in the future.

In connection with our separation from JDSU and trading as an independent public company, we agreed to indemnify Viavi for any liability associated with contamination from past operations at all properties transferred to us from Viavi, to the extent the resulting issues primarily related to our business. We have not been presented with any claims to date.

Global Trade

As our business operates in many global jurisdictions, the import and export of our products and services are subject to laws and regulations including international treaties, U.S. export controls and sanctions laws, customs regulations, and local trade rules around the world which vary widely across different countries and may change from time to time. Such laws, rules and regulations may delay the introduction of some of our products or impact our competitiveness through restricting our ability to do business in certain places or with certain entities and individuals, or by requiring us to comply laws concerning transfer and disclosure of sensitive or controlled technology. In particular, the U.S. and other governments have imposed restrictions on the import and export of, among other things, certain telecommunications products and components. The consequences of any failure to comply with domestic and foreign trade regulations could limit our ability to conduct business in certain areas or with certain customers.

For additional information concerning regulatory compliance and a discussion of the risks associated with governmental regulations that may materially impact us, please see the section entitled “Risk Factors” in Item 1A of Part I of this Report.

from the location of their end customers. Our net revenue is primarily denominated in U.S. dollars, including our net revenue from customers outside the United States based on customer shipment locations as presented above.

Please refer to “Note 20. Operating Segments and Geographic Information” in the Notes to Consolidated Financial Statements. For information regarding risks associated with our international operations, see “Item 1A. Risk Factors.”

Our website is located at www.lumentum.com, and our investor relations website is located at www.investor.lumentum.com. Copies of our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as amended, are available free of charge on our investor relations website as soon as reasonably practicable after we file such material electronically with or furnish it to the Securities and Exchange Commission (the “SEC”). The SEC also maintains a website that contains our SEC filings at www.sec.gov.

Investors and others should note that we routinely use the Investors section of our website to announce material information to investors and the marketplace. While not all of the information that the Company posts on its corporate website is of a material nature, some information could be deemed to be material. Accordingly, the Company encourages investors, the media and others interested in the Company to review the information that it shares on www.lumentum.com. Information in, or that can be accessed through, our website is not incorporated into this Form 10-K.

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes, before making a decision to invest in our common stock. Our business, financial condition, results of operations or prospects could also be harmed by risks and uncertainties not currently known to us or that we currently do not believe are material. If any of the risks actually occur, our business, financial condition, results of operations and prospects could be adversely affected. In that event, the market price of our common stock could decline, and you could lose part or all of your investment.

Our business, results of operations and financial performance have been negatively impacted by the COVID-19 pandemic and related public health responses, such as shelter-in-place orders, social distancing protocols, and travel restrictions in many of the countries and regions in which we have operations or manufacturing partners.

The ultimate impact of the COVID-19 pandemic on our operations and financial performance depends on many factors that are not within our control, including, but not limited, to: governmental, business and individuals’ actions that have been and continue to be taken in response to the pandemic (including restrictions on travel and transport and workforce pressures); the impact of the pandemic and actions taken in response on global and regional economies, travel, and economic activity; the availability of federal, state, local or non-U.S. funding programs; general economic uncertainty in key global markets and financial market volatility; global economic conditions and levels of economic growth; and the pace of recovery when the COVID-19 pandemic subsides (including the availability of treatments and vaccines and the impact of new variants on recovery). In addition, the global economic volatility has significantly impacted the foreign exchange markets, and the currencies of various countries in which we operate and in which we have significant volume of local-currency denominated expenses have seen significant volatility. The magnitude of the impact of COVID-19 on our business operations remains uncertain and difficult to predict, and the situation remains highly dynamic. We have experienced and will continue to experience in subsequent periods, disruptions to our business that will adversely impact our business, financial condition and results of operations.

The markets in which we operate are dynamic and complex, and our success depends upon our ability to deliver both our current product offerings and new products and technologies on time and at acceptable prices to our customers. The markets for our products are characterized by rapid technological change, frequent new product introductions and enhancements, substantial capital investment, changes in customer requirements, continued price pressures and a constantly evolving industry. Historically, these pricing pressures have led to a continued decline of average selling prices across our business. The development of new, technologically advanced products is a complex and uncertain process requiring high levels of innovation and the accurate prediction of technology and market trends, and is further impacted by the disruptions caused by COVID-19 on our ability to continue with research and development activities. The introduction of new products also often requires significant investment to ramp up production capacity, the benefit of which may not be realized if we are not successful in the production of such products or if customer demand does not develop as expected. Ramping of production capacity also entails risks of delays which can limit our ability to realize the full benefit of new product introductions. We cannot assure you that we will be able to identify, develop, manufacture, market or support new or enhanced products successfully, if at all, or on a timely basis. We also cannot assure you that potential markets for our new products will materialize on the timelines we anticipate, or at all, or that our technology will meet our customers’ specifications. Our future performance will depend on the successful development, introduction, deployment and market acceptance of new and enhanced features and products that meet our customers’ current and future needs.

The market for optical communications products in particular has matured over time and these products have increasingly become subject to commoditization. Both legacy competitors as well as new entrants, predominantly Asia-based competitors, have intensified market competition in recent years leading to pricing pressure. To preserve our revenues and product margin structures, we remain reliant on an integrated customer and market approach that anticipates end customer needs as Telecom and Datacom requirements evolve. We also must continue to develop more advanced, differentiated products that command a premium with customers, while conversely continuing to focus on streamlining product costs for established legacy products. If we fail to continue to develop enhanced or new products, or over time are unable to adjust our cost structure to continue to competitively price more mature products, our financial condition and results of operations could be materially and adversely affected.

We have consistently relied on a small number of customers for a significant portion of our sales and in certain of our markets, such as 3D sensing and commercial lasers, this customer concentration is particularly acute. We expect that this customer concentration will continue in the future, and we expect that our growth prospects will continue to depend in part on a small number of customers. Many of our customers purchase products under purchase orders or under contracts that do not contain volume or long-term purchase commitments. Some customers provide us with their expected forecasts for our products several months in advance, but these customers may decrease, cancel or delay purchase orders already in place, including on short notice, or may experience financial difficulty which affects their ability to pay for products, particularly in light of the impacts of COVID-19 on their businesses and markets, and the impact of any such actions may be intensified given our dependence on a limited number of large customers. In addition, changes in the business requirements, vendor selection, project

Under the current regulatory regime, our business with Huawei has been and will continue to be more limited than it was in the past. For example, we have been unable to supply certain additional products and may be limited or unable to work with Huawei on future product developments while Huawei remains on the Entity List, which may negatively impact our financial condition and results of operations. Huawei may seek to obtain similar or substitute products from our competitors that are not subject to these restrictions, or to develop similar or substitute products themselves.

We also manufacture customized products for Huawei, and therefore may be unable to sell certain finished goods inventory to alternative customers, or may be unable to utilize such manufacturing capabilities for products for alternative customers, which may result in further excess and obsolete inventory charges and/or underutilized capacity charges in future periods. In addition, we sell various non-customized products to Huawei in which Huawei represents a significant portion of the related products’ demand.  We have taken charges, and may have significant future charges, for common components which become excess as a result of the inability to sell to Huawei. Future charges related to trade restrictions could be caused by either additional regulatory restrictions enacted with respect to Huawei, or revisions to our estimates of the impact from already-enacted restrictions.  Additional charges may also occur with respect to customized products that we manufacture for other customers in the event that such customers were to be added to the Entity List or otherwise if our ability to sell to such customers were restricted. This trade uncertainty may cause delays or cancellations, which could adversely affect our business, financial conditions and operating results. We believe this trade uncertainty has caused and may in the future cause delays or cancellations, which could adversely affect our business, financial conditions and operating results.

We derive a majority of our revenue from our international operations, and we plan to continue expanding our business in international markets in the future. In addition, we have extensive international manufacturing capabilities through third-party contract manufacturers, as well as through our own international facilities, with employees engaged in R&D, administration, manufacturing, support and sales and marketing activities.

As a result of our international operations, in addition to similar risks we face in our U.S. operations, we are affected by economic, business, regulatory, social, and political conditions in foreign countries, including the following:

Additionally, our business is impacted by fluctuations in local economies and currencies. The COVID-19 pandemic and resulting global economic volatility has significantly impacted the foreign exchange markets, and the currencies of various countries in which we operate and have significant volume of local-currency denominated expenses have seen significant volatility. We expect such volatility to continue, which could negatively impact our results by making our non-U.S. operations more expensive when reported in US dollars, primarily due to the costs of payroll.

Moreover, local laws and customs in many countries differ significantly from or conflict with those in the United States or other countries in which we operate. In many foreign countries, particularly in those with developing economies, it is common for others to engage in business practices that are prohibited by our internal policies and procedures or U.S. regulations applicable to us. There can be no assurance that our employees, contractors, channel partners and agents will not take actions in violation of our policies and procedures, which are designed to ensure compliance with U.S. and foreign laws and policies. Violations of laws or key control policies by our employees, contractors, channel partners, or agents could result in termination of our relationships with customers and suppliers, financial reporting problems, fines and/or penalties for us, or prohibition on the importation or exportation of our products, and could have a material adverse effect on our business, financial condition and results of operations.

In addition to the above risks related to our international operations, we also face risks related to health epidemics, such as the COVID-19 pandemic. An outbreak of a contagious disease, and other adverse public health developments, particularly in Asia, could have a material and adverse effect on our business operations. The effects could include restrictions on our ability to travel to support our sites in Asia or our customers located there, disruptions in our ability to distribute products, and/or temporary closures of our facilities in Asia or the facilities of our suppliers or customers and their contract manufacturers. Disruption to the operations of our suppliers or customers and their contract manufacturers due to COVID-19 have impacted and will likely continue to impact our sales and operating results. For additional information regarding the impact of COVID-19 on our business, see the risk factor above titled “Our business operations, financial performance, results of operations, financial position and the achievement of our strategic objectives may be materially and adversely affected by the ongoing COVID-19 pandemic.”

Any or all of these factors could have a material adverse impact on our business, financial condition, and results of operations.

We also rely on several independent contract manufacturers to supply us with certain products. For many products, a particular contract manufacturer may be the sole source of the finished good products. We depend on these manufacturers to meet our production and capacity requirements and to provide quality products to our customers. If operations at these contract manufacturers is adversely impacted, such as by natural disasters, or restrictions due to COVID-19 or any resulting economic impact to their business, this would likely materially impact our financial condition and results of operations. Our ability to control the quality of products produced by contract manufacturers has and may in the future be impaired due to COVID-19 disruptions, and quality issues might not be resolved in a timely manner. Additionally, if our contract manufacturers continue experiencing disruptions or discontinue operations, we may be required to identify and qualify alternative manufactures, which is expensive and time consuming. If we are required to change or qualify a new contract manufacturer, this would likely cause business disruptions and could harm our existing customer relationships.

In addition, despite rigorous testing for quality, both by us and the contract manufacturers to whom we sell products, we may receive and ship defective products. We may incur significant costs to correct defective products which could result in the loss of future sales and revenue, indemnification costs or costs to replace or repair the defective products, litigation and damage

to our reputation and customer relations. Defective products may also cause diversion of management attention from our business and product development efforts.

Additionally, our manufacturing operations and those of our contract manufacturers may be affected by natural disasters, including a global pandemic such as COVID-19, changes in legal requirements, labor strikes and other labor unrest and economic, political or other forces that are beyond our control. For example, in the past one of our former contract manufacturers experienced a labor strike which threatened the contract manufacturer’s ability to fulfill its product commitments to us and, in turn, our ability to fulfill our obligations to our customers. There is also an increased focus on corporate social and environmental responsibility in our industry. As a result, a number of our customers may adopt policies that include social and environmental responsibility provisions that their suppliers should comply with. These provisions may be difficult and expensive to comply with, given the complexity of our supply chain. We may be unable to cause our suppliers or contract manufactures to comply with these provisions which may adversely affect our relationships with customers.

In addition, for a variety of reasons, including changes in circumstances at our contract manufacturers, restrictions or inability to operate due to COVID-19, or regarding our own business strategies, we may choose or be required to transfer the manufacturing of certain products to other manufacturing sites, including to our own manufacturing facilities. As a result of such transfers, our contract manufacturers may prioritize other customers or otherwise be unable or unwilling to meet our demand. There also may be delays with the transfer of manufacturing equipment and successfully setting up that equipment at the transfer sites and training new operators. If such transfers are unsuccessful or take a longer period of time than expected, it could result in interruptions in supply and supply chain, and would likely impact our financial condition and results of operations.

Some of our purchase commitments with contract manufacturers are not cancellable which may impact our results of operations if customer forecasts driving these purchase commitments do not materialize and we are unable to sell the products to other customers. Alternatively, our contract manufacturers may not be able to meet our demand which would inhibit our ability to meet our customers’ demands and maintain or grow our revenues. Furthermore, it could be costly and require a long period of time to move products from one contract manufacturer to another which could result in interruptions in supply and adversely impact our financial condition and results of operations.

Further, certain of our contract manufacturers are located in China, which exposes us to risks associated with Chinese laws and regulations and U.S. laws, regulations and policies with respect to China, such as those related to import and export policies, tariffs, taxation and intellectual property. Chinese laws and regulations are subject to frequent change, and if our contract manufacturers are unable to obtain or retain the requisite legal permits or otherwise to comply with Chinese legal requirements, we may be forced to obtain products from other manufacturers or to make other operational changes, including transferring our manufacturing to another manufacturer or to our own manufacturing facilities. In addition, many of our products are sourced from suppliers based outside of the United States, primarily in Asia. Uncertainty with respect to our suppliers’ abilities due to COVID-19 impacts, tax and trade policies, tariffs and government regulations affecting trade between the United States and other countries has recently increased. Major developments in tax policy or trade relations, such as the imposition of tariffs on imported products, for example, tariffs on the import of certain products manufactured in China, could increase our product and product-related costs or require us to seek alternative suppliers, either of which could result in decreased sales or increased product and product-related costs. Any such developments could have a material impact on our ability to meet our customers’ expectations and may materially impact our operating results and financial condition.

We purchase raw materials, packages and components from a limited number of suppliers, who are often small and specialized. Additionally, some of our suppliers are our sole sources for certain materials, equipment and components. We depend on the timely and continued supply and quality of the materials, packages and components that our suppliers supply to us. We have not entered into long-term agreements with many of these suppliers. We do not have a guarantee of supply from these suppliers and as a result, there is no assurance that we would be able to secure the equipment or components that we require, in sufficient quantity, quality and on reasonable terms. Our business and results of operations have been, and could continue to be, adversely affected by this dependency. Specific concerns we periodically encounter with our sole suppliers or limited number of suppliers include receipt of defective parts or contaminated materials, stoppages or delays of supply, insufficient resources to supply our requirements, substitution of more expensive or less reliable materials, increases in the price of supplies, and an inability to obtain reduced pricing from our suppliers in response to competitive pressures. Additionally, we have experienced supply constraints due to both constrained manufacturing capacity, as well as component parts shortages, in particular semiconductor components, as our vendors were also facing supply constraints, and increased logistics costs due to air travel and transport restrictions that limited the availability of flights on which we ship our products. These challenges resulted in extended lead-times to our customers and had a negative impact on our ability to recognize associated revenue and has resulted in and may continue to result in an increase in accelerated ordering for certain of our products. We continue to work with our suppliers to ensure that we are able to continue manufacturing and distributing our products and in the quantities requested by our customers; however, we continue to experience disruption to our supply chain that could impact our operations. Any disruption in the supply of the raw materials, packaging or components used in the manufacture and delivery of our products could have a material adverse impact on our business, financial condition and results of operations.

Large OEM and end-user service providers and product companies comprise a significant portion of our customer base. These customers generally have greater purchasing power than smaller entities and, accordingly, often request and receive more favorable terms from suppliers, including us. As we seek to expand our sales to existing customers and acquire new customers, we may be required to agree to terms and conditions that are favorable to our customers and that may affect the timing of our ability to recognize revenue, increase our costs and have an adverse effect on our business, financial condition, and results of operations. Furthermore, large customers have increased buying power and ability to require onerous terms in our contracts with them, including pricing, warranties, and indemnification terms. If we are unable to satisfy the terms of these contracts, it could result in liabilities of a material nature, including litigation, damages, additional costs, loss of market share and loss of reputation. Additionally, the terms these large customers require, such as most-favored nation or exclusivity provisions, may impact our ability to do business with other customers and generate revenues from such customers.

Our products are complex and defects and quality issues are found from time to time. Networking products in particular frequently contain undetected software or hardware defects when first introduced or as new versions are released. In addition, our products are often embedded in or deployed in conjunction with our customers’ products which incorporate a variety of components produced by third parties, which may contain defects. As a result, when problems occur, it may be difficult to identify the source of the problem. These problems may cause us to incur significant damages or warranty and repair costs, divert the attention of our engineering personnel from our product development efforts and manufacturing resources, and cause significant customer relation problems or loss of customers, or risk exposure to product liability suits, all of which would harm our business.

Since the beginning of 2018, there has been rhetoric, in some cases coupled with legislative or executive action, from several U.S. and foreign leaders regarding instituting tariffs against foreign imports of certain materials. More specifically, since 2018, the United States and China applied or proposed to apply tariffs to certain of each other’s exports, and we expect these actions to continue for the foreseeable future. The institution of trade tariffs both globally and between the United States and China specifically carries the risk of negatively impacting overall economic conditions, which could have negative repercussions on our industry and our business. Furthermore, imposition of tariffs or new or revised export, import or doing-business regulations, including trade sanctions, could cause a decrease in the sales of our products to customers located in China or other customers selling to Chinese end users, which would directly impact our business and results of operations.

We have in the past made several acquisitions, including our acquisition of Oclaro in December 2018, and we expect to continue to expand and diversify our operations with additional acquisitions and strategic transactions. As we expand into new markets, we face competition not only from our existing competitors but also from new competitors, including existing companies with strong technological and sales positions in those markets. We may be unable to identify or complete prospective acquisitions for many reasons, including increasing competition from other potential acquirers, the effects of consolidation in our industries and potentially high valuations of acquisition candidates. Even if we do identify acquisitions or enter into agreements with respect to such acquisitions, we may not be able to complete the acquisition due to competition, regulatory requirements or restrictions or other reasons, as occurred with the termination of our merger agreement with Coherent in March 2021. In addition, applicable antitrust laws and other regulations may limit our ability to acquire targets or force us to divest an acquired business. If we are unable to identify suitable targets or complete acquisitions, our growth prospects may suffer, and we may not be able to realize sufficient scale and technological advantages to compete effectively in all markets.

In connection with acquisitions, risks to us and our business include:

We have in the past, and may in the future, divest or reduce our investment in certain businesses or product lines from time to time. For example, in the fourth quarter of fiscal year 2019, we completed the divestiture of our Datacom module business in Japan, and in the second quarter of fiscal year 2020 we sold the assets associated with certain Lithium Niobate product lines manufactured by our San Donato, Italy site. Such divestitures involve risks, such as difficulty separating portions from our other businesses, distracting employees, incurring potential loss of revenue, negatively impacting margins, and potentially disrupting customer relationships. We may also incur significant costs associated with exit or disposal activities, related impairment charges, or both.

If we are unable to successfully manage any of these risks in relation to any future acquisitions or divestitures, our business, financial condition and results of operations could be adversely impacted.

To the extent we are successful in making acquisitions, we may be unsuccessful in implementing our acquisitions strategy, or integrating acquired companies or product lines and personnel with existing operations, or the integration may be more difficult or more costly than anticipated. Some of the risks that may affect our ability to integrate or realize any anticipated benefits from acquired companies, businesses or assets include those associated with:

In addition, following an acquisition, we may have difficulty forecasting the financial results of the combined company and the market price of our common stock could be adversely affected if the effect of any acquisitions on our consolidated financial results is dilutive or is below the market's or financial analysts' expectations, or if there are unanticipated changes in the business or financial performance of the target company or the combined company. Any failure to successfully integrate acquired businesses may disrupt our business and adversely impact our business, financial condition and results of operations.

Manufacturing yields depend on a number of factors, including the volume of production due to customer demand and the nature and extent of changes in specifications required by customers for which we perform design-in work. Changes in manufacturing processes required as a result of changes in product specifications, changing customer needs, introduction of new product lines and changes in contract manufacturers may reduce manufacturing yields, resulting in low or negative margins on those products. Moreover, an increase in the rejection rate of products during the quality control process, before, during or after manufacturing, results in lower gross margins from lower yields and additional rework costs. Additionally, the duration and impact of COVID-19 could exacerbate factors that affect our manufacturing yields. Any reduction in our manufacturing yields will adversely affect our gross margins and could have a material impact on our operating results.

We operate under a defined international structure. If substantial modifications to the international structure or the way we operate our business are made, such as if future acquisitions or divestitures occur, if changes in domestic and international tax laws negatively impact the structure, if we do not operate our business consistent with the structure and applicable tax provisions, if we fail to achieve our revenue and profit goals, or if the international structure or our application of arm’s-length principles to intercompany arrangements is successfully challenged by the U.S. or foreign tax authorities, our effective tax rate may increase, which could have a material adverse effect on our operating and financial results.

Increasingly, countries around the world are actively considering or have enacted changes in relevant tax, accounting and other laws, regulations and interpretations. For example, the Biden administration has proposed to increase the U.S. corporate income tax rate to 28% from 21%, increase the U.S. taxation of our international business operations and impose a global minimum tax. Such proposed changes, as well as regulations and legal decisions interpreting and applying these changes, may have significant impacts on our effective tax rate, cash tax expenses and net deferred tax assets in future periods. Other countries also continue to enact and consider enacting new laws, which could adversely affect us. The foregoing items could increase our future tax expense, could change our future intentions regarding reinvestment of foreign earnings, and could have a material adverse effect on our business, financial condition and results of operations.

We are exposed to foreign exchange risks with regard to our international operations which may affect our operating results. Since we conduct business in currencies other than U.S. dollars but report our financial results in U.S. dollars, we face exposure to fluctuations in currency exchange rates. Although we price our products primarily in U.S. dollars, a portion of our operating expenses are incurred in foreign currencies. For example, a portion of our expenses are denominated in the U.K. pound sterling, Chinese yuan and Thai baht. Fluctuations in the exchange rate between these currencies and other currencies in which we collect revenues and/or pay expenses could have a material effect on our future operating results. Recently, our exposure to foreign currencies has increased as our non-US manufacturing footprint has expanded. In addition to the acquisition of Oclaro, which increased our non-US manufacturing footprint, we continue to look for opportunities to leverage the lower cost of non-US manufacturing, including the United Kingdom, Thailand, and Japan. While these geographies are lower cost than the US and such concentration will in general lower our total cost to manufacture, this increase in concentration in non-US manufacturing will also increase the volatility of our results. If the value of the U.S. dollar depreciates relative to certain other foreign currencies, it would increase our costs as expressed in U.S. dollars. Conversely, if the U.S. dollar strengthens relative to other currencies, such strengthening could raise the relative cost of our products to non-U.S. customers, especially as compared to foreign competitors, and could reduce demand. The COVID-19 pandemic has had a significant impact on the exchange markets, which heightened this risk, and we expect this higher level of volatility in foreign exchange markets will likely continue.

We intend to continue to make investments to support our business growth and may require additional funds to respond to business challenges, including supporting the development and introduction of new products, addressing new markets, engaging in strategic transactions and partnerships, improving or expanding our operating infrastructure or acquiring complementary businesses and technologies. Investments, partnerships and acquisitions involve risks and uncertainties which

Our business depends significantly on effective and efficient information management systems, and the reliability and security of our information technology infrastructure are essential to the health and expansion of our business. For example, the information gathered and processed by our information management systems assists us in managing our supply chain, monitoring customer accounts, and protecting our proprietary and confidential business information, plans, trade secrets, and intellectual property, among other things. In addition, these systems may also contain personal data or other confidential or otherwise protected information about our employees, our customers’ employees, or others. We must continue to expand and update this infrastructure in response to our changing requirements as well as evolving security standards and risks.

In some cases, we may rely upon third-party providers of hosting, support and other services to meet our information technology requirements. Any failure to manage, expand and update our information technology infrastructure, including our ERP system and other applications, any failure in the extension implementation or operation of this infrastructure, or any failure by our hosting and support partners or other third-party service providers in the performance of their services could materially harm our business. In addition, we have partnered with third parties to support our information technology systems and to help design, build, test, implement and maintain our information management systems. Our merger, acquisition and divestiture activity may also require transitions to or from, and the integration of, various information management systems within our overall enterprise architecture, including our ERP system and other applications. Those systems that we acquire or that are used by acquired entities or businesses may also pose security risks of which we are unaware or unable to mitigate, particularly during the transition of these systems.

Like other companies, we are subject to ongoing attempts by malicious actors, including through hacking, malware, ransomware, denial-of-service attacks, social engineering, exploitation of internet-connected devices, and other attacks, to obtain unauthorized access or acquisition of confidential information or otherwise affect service reliability and threaten the confidentiality, integrity and availability of our systems and information stored or otherwise processed on our systems. During the COVID-19 pandemic, the internet has experienced an increase in cyber threats in the form of phishing emails, malware attachments and malicious websites. We have been in the past, and may be in the future, subject to social engineering and other cybersecurity attacks, and these attacks may become more prevalent while our workforce is distributed following shelter-in-place orders particularly given the increased remote access to our networks and systems as a result. Further, our third-party service providers may have been and may be in the future subject to such attacks or otherwise may suffer security breaches or incidents. In addition, actions by our employees, service providers, partners, contractors, or others, whether malicious or in error, could affect the security of our systems. Further, a breach of our information technology infrastructure or those of our third-party service providers could result in the misappropriation of intellectual property, business plans or trade secrets. Any failure of our systems or those of our third-party service providers could result in unauthorized access to, or unauthorized use, acquisition, disclosure, or other processing of such information, and any actual or perceived security breach or incident could cause significant damage to our reputation and adversely impact our relationships with our customers. Additionally, while our security systems are designed to maintain the physical security of our facilities and information systems, accidental or willful security breaches or incidents or other unauthorized access by third parties to our facilities or our information systems could lead to unauthorized access to, or misappropriation, disclosure, or other processing of proprietary and confidential information.

Despite our implementation of security measures, our systems and those of our third-party service providers are vulnerable to damage from these types of attacks or errors. In addition, our systems may be impacted by natural disasters, terrorism or other similar disruptions. Any system failure, disruption, accident or security breach or incident affecting us or our third-party providers could result in disruptions to our operations and loss of, or unauthorized access or damage to, our data or in inappropriate access to, or use, disclosure or otherwise processing of confidential information. Any actual or alleged disruption to, or security breach or incident affecting, our systems or those of our third-party partners could cause significant damage to our reputation, lead to theft or misappropriation of our protected intellectual property and trade secrets, result in claims,

Spending on optical communication and laser products is subject to cyclical and uneven fluctuations, which could cause our financial results to fluctuate unpredictably. It can be difficult to predict the degree to which end-customer demand and the seasonality and uneven sales patterns of our OEM partners or other customers will affect our business in the future, particularly as we or they release new or enhanced products. While our fourth fiscal quarters are typically strongest, future buying patterns may differ from historical seasonality. Further, if our revenue mix changes, it may also cause results to differ from historical seasonality. Accordingly, our quarterly and annual revenues, operating results, cash flows, and other financial and operating metrics may vary significantly in the future, and the results of any prior periods should not be relied upon as an indication of future performance.

Adverse changes to and uncertainty in the global economy, particularly in light of the impacts of COVID-19 and a potential global recession resulting therefrom, may lead to decreased demand for our products, revenue fluctuations, and increased price competition for our products, and may increase the risk of excess and obsolete inventories and higher overhead costs as a percentage of revenue. Declines or uncertainty in particular geographic regions, such as China or Europe, may impact IT-related spending generally, and consequently may lead to lower growth or a decline in our markets. The loss or delay of orders from any of our significant customers could cause our revenue and profitability to suffer. The impact of economic challenges on the global financial markets could further negatively impact our operations by affecting the solvency of our customers, the solvency of our key suppliers or the ability of our customers to obtain credit to finance purchases of our products. Further, supply chain disruptions may lead to increased costs or may harm our ability to meet customer demand, which would harm our ability to recognize revenue as well as our margins. If economic conditions deteriorate or remain uncertain, our financial condition and results of operations would likely be materially and adversely impacted.

We seek to protect our products and product roadmaps in part by developing and/or securing proprietary rights relating to those products, including patents, trade secrets, know-how and continuing technological innovation. Protecting against the unauthorized use of our products, technology and other proprietary rights is difficult, time-consuming and expensive, therefore the steps we take to protect our intellectual property may not adequately prevent misappropriation or ensure that others will not develop competitive technologies or products. Other companies may be investigating or developing technologies that are similar to our own. Additionally, there may be existing patents that we are unaware of, which could be pertinent to our business. It is not possible for us to know whether there are patent applications pending that our products might infringe upon since these applications are often not made publicly available until a patent is issued or published. It is possible that patents may not be issued from any of our pending applications or those we may file in the future and, if patents are issued, the claims allowed may not be sufficiently broad to deter or prohibit others from making, using or selling products that are similar to ours, or such patents could be invalidated or ruled unenforceable. We do not own patents in every country in which we sell or distribute our products, and thus others may be able to offer identical products in countries where we do not have intellectual property protections. In addition, the laws of some territories in which our products are or may be developed, manufactured or sold, including Europe, Asia-Pacific or Latin America, may not protect our products and intellectual property rights to the same extent as the laws of the United States. Any patents issued to us may be challenged, invalidated or circumvented. Additionally, we are currently a licensee for a number of third-party technologies including software and intellectual property rights from academic institutions, our competitors and others, and we are required to pay royalties to these licensors for the use thereof. In the future, if such licenses are unavailable or if we are unable to obtain such licenses on commercially reasonable terms, we may not be able to rely on such third-party technologies which could inhibit our development of new products, impede the sale of some of our current products, substantially increase the cost to provide these products to our customers, and could have a significant adverse impact on our operating results.

We also seek to protect our important trademarks by endeavoring to register them in certain countries. We have not registered our trademarks in every country in which we sell or distribute our products, and thus others may be able to use the same or confusingly similar marks in countries where we do not have trademark registrations. We have adopted Lumentum as a house trademark and trade name for our company, and are in the process of establishing rights in this name and brand. We have

also adopted the Lumentum logo as a house trademark for our company, and are in the process of establishing rights in this brand. Trademarks associated with the Lumentum brand have been registered in the United States or other jurisdictions, however, the efforts we take to maintain registration and protect trademarks, including the Lumentum brand, may not be sufficient or effective. Although we have registered marks associated with the Lumentum brand, third parties may seek to oppose or otherwise challenge these registrations. There is the possibility that, despite efforts, the scope of the protection obtained for our trademarks, including the Lumentum brand, will be insufficient or that a registration may be deemed invalid or unenforceable in one or more jurisdictions throughout the world.

Further, a breach of our information technology infrastructure could result in the misappropriation of intellectual property, business plans or trade secrets. Any failure of our systems or those of our third-party service providers could result in unauthorized access or acquisition of such proprietary information, and any actual or perceived security breach could cause significant damage to our reputation and adversely impact our relationships with our customers.

Lawsuits and allegations of patent infringement and violation of other intellectual property rights occur regularly in our industry. We have in the past received, and anticipate that we will receive in the future, notices from third parties claiming that our products infringe upon their proprietary rights, with two distinct sources of such claims becoming increasingly prevalent. First, large technology companies, including some of our customers and competitors, are seeking to monetize their patent portfolios and have developed large internal organizations that may approach us with demands to enter into license agreements. Second, patent-holding companies that do not make or sell products (often referred to as “patent trolls”) may claim that our products infringe upon their proprietary rights. We respond to these claims in the course of our business operations. The litigation or settlement of these matters, regardless of the merit of the claims, could result in significant expense and divert the efforts of our technical and management personnel, regardless of whether or not we are successful. If we are unsuccessful, we could be required to expend significant resources to develop non-infringing technology or to obtain licenses to the technology that is the subject of the litigation. We may not be successful in such development, or such licenses may not be available on commercially reasonable terms, or at all. Without such a license, or if we are the subject of an exclusionary order, our ability to make our products could be limited and we could be enjoined from future sales of the infringing product or products, which could adversely affect our revenues and operating results. Additionally, we often indemnify our customers against claims of infringement related to our products and may incur significant expenses to defend against such claims. If we are unsuccessful defending against such claims, we may be required to indemnify our customers against any damages awarded.

We also face risks that third parties may assert trademark infringement claims against us in one or more jurisdictions throughout the world related to our Lumentum and Oclaro brands and/or other trademarks and our exposure to these risks may increase as a result of acquisitions. The litigation or settlement of these matters, regardless of the merit of the claims, could result in significant expense and divert the efforts of our technical and management personnel, regardless of whether or not we are successful. If we are unsuccessful, trademark infringement claims against us could result in significant monetary liability or prevent us from selling some or all of our products or services under the challenged trademark. In addition, resolution of claims may require us to alter our products, labels or packaging, license rights from third parties, or cease using the challenged trademark altogether, which could adversely affect our revenues and operating results.

We are now, and in the future we may become, subject to various legal proceedings and claims that arise in or outside the ordinary course of business. The results of legal proceedings are difficult to predict. Moreover, many of the complaints filed against us may not specify the amount of damages that plaintiffs seek, and we therefore may be unable to estimate the possible range of damages that might be incurred should these lawsuits be resolved against us. While we may be unable to estimate the potential damages arising from such lawsuits, certain of them assert types of claims that, if resolved against us, could give rise to substantial damages or restrictions on or changes to our business. Thus, an unfavorable outcome or settlement of one or more of these lawsuits could have a material adverse effect on our financial condition, liquidity and results of operations. Even if these lawsuits are not resolved against us, the uncertainty and expense associated with unresolved lawsuits could seriously harm our business, financial condition and reputation. Litigation is generally costly, time-consuming and disruptive to normal business operations. The costs of defending these lawsuits have been significant in the past, will continue to be costly and may not be covered by our insurance policies. The defense of these lawsuits could also result in continued diversion of our management’s time and attention away from business operations, which could harm our business. For additional discussion regarding litigation, see “Part II, Item 1. Legal Proceedings.”

We integrate licensed third-party technology into certain of our products. From time to time, we may be required to license additional technology from third-parties to develop new products or product enhancements. Third-party licenses may not be available or continue to be available to us on commercially reasonable terms. The failure to comply with the terms of any license, including free open source software, may result in our inability to continue to use such license. Our inability to maintain or re-license any third-party licenses required in our products or our inability to obtain third-party licenses necessary to develop new products and product enhancements, could potentially require us to develop substitute technology or obtain substitute technology of lower quality or performance standards or at a greater cost, any of which could delay or prevent product shipment and harm our business, financial condition, and results of operations.

We are also subject to laws and regulations with respect to personal data we collect from our employees, customers, and others. These laws and regulations are subject to frequent modifications and updates and require ongoing supervision. For example, the European Union adopted a General Data Protection Regulation (“GDPR”) that became effective in May 2018, and has established new, and in some cases more stringent, requirements for data protection in Europe, and which provides for substantial penalties for noncompliance. We have made certain modifications to our practices in order to comply with these or other requirements, and may be required to make additional modifications in order to comply with these or other requirements relating to privacy and data protection in the future, each of which may require us to incur significant costs and expenses. Additionally, California enacted legislation in June 2018, the California Consumer Privacy Act (“CCPA”), which went into effect on January 1, 2020 and which, among other things, requires covered companies to provide new disclosures to California consumers. In November 2020, California passed the California Privacy Rights Act (“CPRA”), which will go into effect on January 1, 2023. The CPRA amends and augments the CCPA by expanding individuals’ rights and the obligations of businesses that handle personal data. Similar legislation has been proposed or adopted in other states. Aspects of the CCPA, CPRA and these other state laws and regulations, as well as their enforcement, remain unclear. The effects of the CCPA, CPRA and these other state laws and regulations are potentially significant, however, and may require us to modify our data processing practices and policies and to incur substantial costs and expenses in an effort to comply. Laws and regulations relating to privacy and data protection continue to evolve in various jurisdictions, with existing laws and regulations subject to new and differing interpretations and new laws and regulations being proposed and adopted. It is possible that our practices may be deemed not to comply with those privacy and data protection legal requirements that apply to us now or in the future.

Our failure or perceived failure to comply with any of the foregoing legal and regulatory requirements could result in increased costs for our products, monetary penalties, damage to our reputation, government inquiries and investigations, and legal action. Furthermore, the legal and regulatory requirements that are applicable to our business are subject to change from time to time, which increases our monitoring and compliance costs and the risk that we may fall out of compliance. Additionally, we may be required to ensure that our suppliers comply with applicable laws and regulations. If we or our suppliers fail to comply with such laws or regulations, we could face sanctions for such noncompliance, and our customers may refuse to purchase our products, which would have a material adverse effect on our business, financial condition and results of operations.

As a public company, we are subject to the reporting requirements of the Securities Exchange Act of 1934, as amended, or the Exchange Act, the Sarbanes-Oxley Act of 2002, as amended, or the Sarbanes-Oxley Act, and Nasdaq listing requirements. The Sarbanes-Oxley Act requires, among other things, that we maintain effective disclosure controls and procedures and internal control over financial reporting. In order to maintain and improve the effectiveness of our disclosure controls and procedures and internal control over financial reporting, we have expended, and anticipate that we will continue to expend, significant resources, including accounting-related costs and significant management oversight.

Any failure to develop or maintain effective controls, or any difficulties encountered in their implementation or improvement, could cause us to delay reporting of our financial results, be subject to one or more investigations or enforcement actions by state or federal regulatory agencies, stockholder lawsuits or other adverse actions requiring us to incur defense costs, pay fines, settlements or judgments. Any such failures could also cause investors to lose confidence in our reported financial and other information, which would likely have a negative effect on the trading price of our common stock and customer perception of our business may suffer. In addition, if we are unable to continue to meet these requirements, we may not be able to remain listed on the NASDAQ stock market.

Our future success depends upon our ability to recruit and retain the services of executive, engineering, sales and marketing, and support personnel. The supply of highly qualified individuals, in particular engineers in very specialized technical areas, or sales people specializing in the service provider, enterprise and commercial laser markets, is limited and competition for such individuals is intense. Also, as a result of COVID-19, employees in our industries are increasingly able to work remotely, which has increased employee mobility and turnover, making it difficult for us to retain or hire employees. None of our officers or key employees is bound by an employment agreement for any specific term. The loss of the services of any of our key employees, the inability to attract or retain personnel in the future or delays in hiring required personnel and the complexity and time involved in replacing or training new employees, could delay the development and introduction of new products, and negatively impact our ability to market, sell, or support our products.

Foreign nationals who are not U.S. citizens or permanent residents constitute an important part of our U.S. workforce, particularly in the areas of engineering and product development. Our ability to hire and retain these workers and their ability to remain and work in the United States are impacted by laws and regulations, as well as by procedures and enforcement practices of various government agencies and global events such as COVID-19 may interfere with our ability to hire or retain workers who require visas or entry permits. For example, in response to the pandemic, the U.S suspended entry of certain foreign nationals, which could impact our ability to hire and retain highly skilled employees from other countries. Changes in immigration laws, regulations or procedures, including those that have been and may be enacted in the future by the U.S. government, including current U.S. presidential administration, and in the United Kingdom or the European Union in connection with Brexit, may adversely affect our ability to hire or retain such workers, increase our operating expenses and negatively impact our ability to deliver our products and services.

Exports of certain of our products are subject to export controls imposed by the U.S. government and administered by the U.S. Departments of State and Commerce. In certain instances, these regulations may require pre-shipment authorization from the administering department. For products subject to the Export Administration Regulations (“EAR”) administered by the Bureau of Industry and Security (“BIS”), the requirement for a license is dependent on the type and end use of the product, the final destination, the identity of the end user and whether a license exception might apply. Virtually all exports of products subject to the International Traffic in Arms Regulations (“ITAR”) administered by the Department of State’s Directorate of Defense Trade Controls, require a license. Certain of our fiber optics products are subject to EAR and certain of our RF-over-fiber products, as well as certain products and technical data, are developed with government funding, and are currently subject

Given the current global political climate, obtaining export licenses can be difficult and time-consuming. Failure to obtain export licenses for these shipments could significantly reduce our revenue and materially adversely affect our business, financial condition, relationships with our customers and results of operations. Compliance with U.S. government regulations also subjects us to additional fees and costs. The absence of comparable restrictions on competitors in other countries may adversely affect our competitive position.

Further, there is increased attention from the government and the media regarding potential threats to U.S. national security and foreign policy relating to certain foreign entities, particularly Chinese entities, and the imposition of enhanced restrictions or sanctions regarding the export of our products or on specific foreign entities that would restrict their ability to do business with U.S. companies may materially adversely affect our business. For example, on May 16, 2019, Huawei was added to the Entity List of the Bureau of Industry and Security of the U.S. Department of Commerce, additional regulatory restrictions were imposed in May and August 2020 to the Foreign-Produced Direct Product Rule, which impose limitations on the supply of certain U.S. items and product support to Huawei, and FiberHome Technologies was added to the Entity List on May 22, 2020. These actions have resulted in escalating tensions between the U.S. and China and create the possibility that the Chinese government may take additional steps to retaliate against U.S. companies or industries. We cannot predict what additional actions the U.S. government may take with respect to Huawei beyond what is described above or to other of our customers, including modifications to or interpretations of Entity List restrictions, export restrictions, tariffs, or other trade limitations or barriers.

In addition, certain of our significant customers and suppliers have products that are subject to U.S. export controls, and therefore these customers and suppliers may also be subject to legal and regulatory consequences if they do not comply with applicable export control laws and regulations. Such regulatory consequences could disrupt our ability to obtain components from our suppliers, or to sell our products to major customers, which could significantly increase our costs, reduce our revenue and materially adversely affect our business, financial condition and results of operations.

Our operations and our products are subject to various federal, state and foreign laws and regulations, including those governing pollution and protection of human health and the environment in the jurisdictions in which we operate or sell our products. These laws and regulations govern, among other things, wastewater discharges and the handling and disposal of hazardous materials in our products. Our failure to comply with current and future environmental or health or safety requirements could cause us to incur substantial costs, including significant capital expenditures, to comply with such environmental laws and regulations and to clean up contaminated properties that we own or operate. Such clean-up or compliance obligations could result in disruptions to our operations. Additionally, if we are found to be in violation of these laws, we could be subject to governmental fines or civil liability for damages resulting from such violations. These costs could have a material adverse impact on our financial condition or operating results.

From time to time new regulations are enacted, and it is difficult to anticipate how such regulations will be implemented and enforced. We continue to evaluate the necessary steps for compliance with regulations as they are enacted. These regulations include, for example, the Registration, Evaluation, Authorization and Restriction of Chemicals (“REACH”), the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Directive (“RoHS”) and the Waste Electrical and Electronic Equipment Directive (“WEEE”) enacted in the European Union which regulate the use of certain hazardous substances in, and require the collection, reuse and recycling of waste from, certain products we manufacture. These regulations and similar legislation may require us to re-design our products to ensure compliance with the applicable standards, for example by requiring the use of different types of materials, which could have an adverse impact on the performance of our products, add greater testing lead-times for product introductions or other similar effects. We believe we

comply with all such legislation where our products are sold, and we continuously monitor these laws and the regulations being adopted under them to determine our responsibilities.

In addition, pursuant to Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act, the SEC has promulgated rules requiring disclosure regarding the use of certain “conflict minerals” that are mined from the Democratic Republic of Congo and adjoining countries and procedures regarding a manufacturer’s efforts to prevent the sourcing of such minerals. Complying with these disclosure requirements involves substantial diligence efforts to determine the source of any conflict minerals used in our products and may require third-party auditing of our diligence process. These efforts may demand internal resources that would otherwise be directed towards operations activities.

Since our supply chain is complex, we may face reputational challenges if we are unable to sufficiently verify the origins of the conflict minerals used in our products. Additionally, if we are unable to satisfy those customers who require that all of the components of our products are determined to be conflict free, they may choose a competitor’s products which could materially impact our financial condition and operating results.

Our common stock is listed on the Nasdaq Global Select Market (“NASDAQ”) under the symbol “LITE”. The market price of our common stock has fluctuated, and may fluctuate significantly due to a number of factors, some of which may be beyond our control, including:

In addition, the stock markets have experienced extreme price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many technology companies. Stock prices of many technology companies have fluctuated in a manner unrelated or disproportionate to the operating performance of those companies. In the past, stockholders have instituted securities class action litigation following periods of market volatility. If we were to become involved in securities litigation, it could subject us to substantial costs, divert resources and the attention of management from our business and adversely affect our business, results of operations, financial condition and cash flows.

Our ability to make scheduled payments of the principal of, to pay interest on or to refinance our indebtedness, including the 2024 Notes and 2026 Notes, or to make cash payments in connection with any conversion of the 2024 Notes, 2026 Notes or upon any fundamental change if holders of the applicable series of notes require us to repurchase their notes for cash, depends on our future performance, which is subject to economic, financial, competitive and other factors beyond our control. Our business may not generate cash flow from operations in the future sufficient to service our indebtedness and make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring indebtedness or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance our indebtedness will depend on the capital markets and our financial condition at such time. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations. In addition, our existing and future indebtedness could have important consequences to our stockholders and significant effects on our business. For example, it could:

In August 2020, the FASB published an Accounting Standards Update, or ASU 2020-06, to reduce the number of accounting models for convertible debt instruments. Under ASU 2020-06, the embedded conversion features are no longer separated from the host contract for convertible instruments with conversion features that are not required to be accounted for as derivatives under Topic 815, or that do not result in substantial premiums accounted for as paid-in capital. Consequently, upon adoption, our 2024 Notes and 2026 Notes will be accounted for as a single liability measured at amortized cost. Further, ASU 2020-06 eliminates the use of the treasury stock method for convertible instruments that can be settled in whole or in part with equity, and instead requires application of the “if-converted” method. Under that method, diluted earnings per share will be generally calculated assuming that all our 2024 Notes or 2026 Notes were converted solely into shares of common stock at the beginning of the reporting period, unless the result would be antidilutive. ASU 2020-06 is effective for us in our first quarter of fiscal year 2023. We are currently evaluating the impact of ASU 2020-06 on our consolidated financial statements. The application of the if-converted method may reduce our reported diluted earnings per share.

If the 2024 Notes or the 2026 Notes are converted by holders of such series, we have the ability under the applicable indenture to deliver cash, equity, common stock, or any combination of cash or common stock, at our election upon conversion of the applicable series of convertible notes. If we elect to deliver common stock upon conversion of the 2024 Notes or the 2026 Notes, it would dilute the ownership interests of existing stockholders. Any sales in the public market of the common stock issuable upon such conversion could adversely affect prevailing market prices of our common stock. In addition, certain holders of the 2024 Notes or the 2026 Notes may engage in short selling to hedge their position in the convertible notes. Anticipated future conversions of the 2024 Notes or 2026 Notes into shares of our common stock could depress the price of our common stock.

We do not currently expect to pay dividends on our common stock. The payment of any dividends to our stockholders in the future, and the timing and amount thereof, if any, is within the discretion of our board of directors. Our board of directors’ decisions regarding the payment of dividends will depend on many factors, such as our financial condition, earnings, capital requirements, potential debt service obligations or restrictive covenants, industry practice, legal requirements, regulatory constraints and other factors that our board of directors deems relevant.

In addition, because we are a holding company with no material direct operations, we are dependent on loans, dividends and other payments from our operating subsidiaries to generate the funds necessary to pay dividends on our common stock. However, our operating subsidiaries’ ability to make such distributions will be subject to their operating results, cash requirements and financial condition and the applicable provisions of Delaware law that may limit the amount of funds available for distribution. Our ability to pay cash dividends may also be subject to covenants and financial ratios related to existing or future indebtedness, and other agreements with third parties.

Our bylaws provide that, unless we consent in writing to an alternative forum, the state or federal courts of Delaware are the sole and exclusive forum for any derivative action or proceeding brought on our behalf; any action asserting breach of fiduciary duty, or other wrongdoing, by our directors, officers or other employees to us or our stockholders; any action asserting a claim against Lumentum pursuant to the Delaware General Corporation Law or our certificate of incorporation or bylaws; any action asserting a claim against Lumentum governed by the internal affairs doctrine; or any action to interpret, apply, enforce or determine the validity of our certificate of incorporation or bylaws. This exclusive forum provision may limit the ability of our stockholders to bring a claim in a different judicial forum that such stockholders find favorable for disputes with us or our directors or officers, which may discourage such lawsuits against us or our directors and officers.

Alternatively, if a court outside of Delaware were to find this exclusive forum provision inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings described above, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition or results of operations.

We own and lease various properties in the United States and eleven other countries around the world. We use the properties for executive and administrative offices, data centers, product development offices, customer service offices and manufacturing facilities. Our current corporate headquarters is approximately 238,000 square feet and located in San Jose, California which we own. As of July 3, 2021, our leased and owned properties in total are approximately 1,800,000 square feet, of which we own approximately 825,000 square feet, including the 560,000 square feet manufacturing site in Thailand, the 238,000 square feet on the San Jose campus, and the 25,000 square feet manufacturing in Slovenia. Larger leased sites include properties located in Canada, China, Japan, Italy, the United Kingdom and the United States. We believe our existing properties, including both owned and leased sites, are in good condition and suitable for the conduct of our business.

From time to time we consider various alternatives related to our long-term facilities’ needs. While we believe our existing facilities are adequate to meet our immediate needs, it may become necessary to lease, acquire, or sell additional or alternative space to accommodate future business needs.

We are subject to a variety of claims and suits that arise from time to time in the ordinary course of our business. While management currently believes that resolving claims against us, individually or in the aggregate, will not have a material adverse impact on our financial position, results of operations or cash flows, these matters are subject to inherent uncertainties and management’s view of these matters may change in the future. Should we experience an unfavorable final outcome, there exists the possibility of a material adverse impact on our financial position, results of operations or cash flows for the period in which the effect becomes reasonably estimable.

Merger Litigation

In connection with our acquisition of Oclaro, seven lawsuits were filed by purported stockholders of Oclaro challenging the proposed merger (the “Merger”). Two of the seven suits were putative class actions filed against Oclaro, its directors, Lumentum, Prota Merger Sub, Inc. and Prota Merger, LLC: Nicholas Neinast v. Oclaro, Inc., et al., No. 3:18-cv-03112-VC, in the United States District Court for the Northern District of California (filed May 24, 2018) (the “Neinast Lawsuit”); and Adam Franchi v. Oclaro, Inc., et al., No. 1:18-cv-00817-GMS, in the United States District Court for the District of Delaware (filed June 9, 2018) (the “Franchi Lawsuit”). Both the Neinstat Lawsuit and the Franchi Lawsuit were voluntarily dismissed with prejudice.

The other five suits, styled as Gerald F. Wordehoff v. Oclaro, Inc., et al., No. 5:18-cv-03148-NC (the “Wordehoff Lawsuit”), Walter Ryan v. Oclaro, Inc., et al., No. 3:18-cv-03174-VC (the “Ryan Lawsuit”), Jayme Walker v. Oclaro, Inc., et al., No. 5:18-cv-03203-EJD (the “Walker Lawsuit”), Kevin Garcia v. Oclaro, Inc., et al., No. 5:18-cv-03262-VKD (the “Garcia Lawsuit”), and SaiSravan B. Karri v. Oclaro, Inc., et al., No. 3:18-cv-03435-JD (the “Karri Lawsuit” and, together with the other six lawsuits, the “Lawsuits”), were filed in the United States District Court for the Northern District of California on May 25, 2018, May 29, 2018, May 30, 2018, May 31, 2018, and June 9, 2018, respectively. These five Lawsuits named Oclaro and its directors as defendants only and did not name Lumentum. The Wordehoff, Ryan, Walker, and Garcia Lawsuits have been voluntarily dismissed, and the Wordehoff, Ryan, and Walker dismissals were with prejudice. The Karri Lawsuit has not yet been dismissed. The Ryan Lawsuit was, and the Karri Lawsuit is, a putative class action.

The Lawsuits generally alleged, among other things, that Oclaro and its directors violated Section 14(a) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and Rule 14a-9 promulgated thereunder by disseminating an incomplete and misleading Form S-4, including proxy statement/prospectus. The Lawsuits further alleged that Oclaro’s directors violated Section 20(a) of the Exchange Act by failing to exercise proper control over the person(s) who violated Section 14(a) of the Exchange Act.

The remaining Lawsuit (the Karri Lawsuit) currently purports to seek, among other things, damages to be awarded to the plaintiff and any class, if a class is certified, and litigation costs, including attorneys’ fees. A lead plaintiff and counsel has been selected, and an amended complaint was filed on April 15, 2019, which also names Lumentum as a defendant. A motion to dismiss the amended complaint was granted in part and denied in part by the court on October 8, 2020. On December 1, 2020, defendants answered the amended complaint. On December 23, 2020, defendants filed a motion for leave to file a motion for reconsideration of the Court’s October 8 order on the motion to dismiss, which was denied on January 29, 2021. The Karri Lawsuit remains pending with the parties currently in discovery. Defendants intend to defend the Karri Lawsuit vigorously.

PART II

We do not expect to pay cash dividends on our common stock in the foreseeable future.

Stock Performance Graph

The following graph compares the cumulative total return of our common stock with the total return for the NASDAQ Composite Index (the “IXIC”) and the NASDAQ 100 Technology Sector Index (the “NDXT”) from August 4, 2015 through July 3, 2021. The stock price performance on the following graph is not necessarily indicative of future stock price performance.

Recent Sale of Unregistered Equity Securities

None.

We are an industry-leading provider of optical and photonic products, defined by revenue and market share, addressing a range of end-market applications including Optical Communications, which we refer to as OpComms, and Lasers for manufacturing, inspection and life-science applications. We have two operating segments, OpComms and Lasers. The two operating segments were primarily determined based on how the Chief Operating Decision Maker (“CODM”) views and evaluates our operations. Operating results are regularly reviewed by the CODM to make decisions about resources to be allocated to the segments and to assess their performance. Other factors, including market separation and customer specific applications, go-to-market channels, products and manufacturing, are considered in determining the formation of these operating segments.

Our OpComms products address the following markets: Telecom, Datacom and Consumer and Industrial.

Our OpComms products include a wide range of components, modules and subsystems to support customers including carrier networks for access (local), metro (intracity), long-haul (city-to-city and worldwide) and submarine (undersea) applications. Additionally, our products address enterprise, cloud, and data center applications, including storage-access networks (“SANs”), local-area networks (“LANs”) and wide-area networks (“WANs”). These products enable the transmission and transport of video, audio and data over high-capacity fiber-optic cables. We maintain leading positions in these fast growing OpComms markets through our extensive product portfolio, including reconfigurable optical add/drop multiplexers (“ROADMs”), coherent dense wavelength division multiplexing (“DWDM”) pluggable transceivers, and tunable small form-factor pluggable transceivers. We also sell laser chips for use in manufacturing of high-speed Datacom transceivers.In the Consumer and Industrial market, our OpComms products include laser light sources, which are integrated into 3D sensing

platforms being used in applications for mobile devices, gaming, computers, and other consumer electronics devices. New emerging applications include virtual and augmented reality, as well as automotive and industrial segments. Our products include vertical cavity surface emitting lasers (“VCSELs”) and edge emitting lasers which are used in 3D sensing depth imaging systems. These systems simplify the way people interact with technology by enabling the use of natural user interfaces. Systems are used for biometric identification, surveillance, and process efficiency, among numerous other application spaces. Emerging applications for this technology include various mobile device applications, autonomous vehicles, self-navigating robotics and drones in industrial applications and 3D capture of objects coupled with 3D printing. In addition, our industrial diode lasers are used primarily as pump sources for pulsed and kilowatt class fiber lasers.

Our OpComms customers include Alphabet, Apple, Ciena, Cisco Systems (which acquired Acacia Communications on March 1, 2021, another customer of ours), Huawei Technologies (including HiSilicon), Infinera, Innolight, NEC, Nokia Networks (including Alcatel-Lucent International), and ZTE.

Related to the strategic changes in our OpComms business, we entered into two strategic transactions to sell some of the discontinued product lines. In the second quarter of fiscal year 2020, we entered into an agreement with Advanced Fiber Resources (Zhuhai) Ltd. (“AFR”), a leading provider of passive optical components, to sell the assets associated with certain Lithium Niobate product lines manufactured by our San Donato site for $17.0 million. The transaction was closed in the third quarter of fiscal year 2020. On April 18, 2019, we closed a transaction selling many of our Datacom transceiver module product lines to Cambridge Industries Group (“CIG”). For further information regarding this transaction, refer to “Note 5. Assets and Liabilities Held For Sale” in the notes to consolidated financial statements.

Our Lasers products serve our customers in markets and applications such as sheet metal processing, general manufacturing, biotechnology, graphics and imaging, remote sensing, and precision machining such as drilling in printed circuit boards, wafer singulation, glass cutting and solar cell scribing.

Our Lasers products are used in a variety of OEM applications including diode-pumped solid-state, fiber, diode, direct-diode and gas lasers such as argon-ion and helium-neon lasers. Fiber lasers provide kW-class output powers combined with excellent beam quality and are used in sheet metal processing and metal welding applications. Diode-pumped solid-state lasers provide excellent beam quality, low noise and exceptional reliability and are used in biotechnology, graphics and imaging, remote sensing, materials processing and precision machining applications. Diode and direct-diode lasers address a wide variety of applications, including laser pumping, thermal exposure, illumination, ophthalmology, image recording, printing, plastic welding and selective soldering. Gas lasers such as argon-ion and helium-neon lasers provide a stable, low-cost and reliable solution over a wide range of operating conditions, making them well-suited for complex, high-resolution OEM applications such as flow cytometry, DNA sequencing, graphics and imaging and semiconductor inspection.

We also provide high-powered and ultrafast lasers for the industrial and scientific markets. Manufacturers use high-power, ultrafast lasers to create micro parts for consumer electronics and to process semiconductor, LED, and other types of chips. Use of ultrafast lasers for micromachining applications is being driven primarily by the increasing use of consumer electronics and connected devices globally.

Our Lasers customers include Amada, ASML Holding, Beckman Coulter, DISCO, Electro Scientific Industries (acquired by MKS Instruments in February 2019), Han’s Laser Technology, KLA-Tencor, Lasertec, Life Technologies, and NR Electric.

The COVID-19 pandemic has caused public health officials to recommend, and governments to enact, precautions to mitigate the spread of the virus, including travel restrictions and bans, extensive social distancing guidelines, closure or restrictions on business and quarantine or other types of “shelter-in-place” orders in many regions of the world. The pandemic and these related responses have caused, and are expected to continue to cause a global slowdown of economic activity (including a decrease in demand for a broad variety of goods and services), disruptions in global supply chains and significant volatility and potential disruption of financial markets. We have adopted several measures in response to the COVID-19 outbreak including complying with local, state or federal orders that require employees to work from home, instructing employees to work from home in certain jurisdictions, limiting the number of employees onsite which slowed our manufacturing operations in certain countries, enhanced use of personal protective equipment and restricting non-critical business travel by our employees.

In the geographies we have operations, we have, in general, been deemed an essential business and been permitted to continue manufacturing and providing new product development operations in a more limited capacity during the pandemic. This stems from our critical role in global supply chains for the world’s communications and health-care systems. Given the continually evolving situation, it is difficult to predict the magnitude and duration of the impact of the COVID-19 pandemic to our markets or precisely when our ability to supply our products will return to full capacity. We are continuing to actively monitor the situation and may take further actions altering our business operations that we determine are in the best interests of our employees, customers, communities, business partners, suppliers, and stockholders, or as required by federal, state, or local authorities. It is not clear what the potential effects any such alterations or modifications may have on our business, including the effects on our customers, employees, and prospects, or on our financial results for fiscal year 2022.

We are actively monitoring the evolving impact of the coronavirus outbreak. The extent to which our operations will continue to be impacted by the outbreak will depend largely on future developments, which are highly uncertain and cannot be accurately predicted, including new information which may emerge concerning the severity of the outbreak and additional variants, the speed, efficacy, and acceptance of vaccine distributions, variant strains of the virus, actions by government authorities and private businesses to contain the severity of the outbreak and emerging variants in various geographies and the speed and trajectory of any recovery from the impact of the pandemic, among other things.

COVID-19 has also created dynamics in the semiconductor component supply chains that have led to shortages of the types of components we and our customers require in our products. These shortages are expected to impact our ability to generate revenue from certain products in early fiscal 2022 and, if our ability to procure needed semiconductor components does not improve, this will impact our ability to supply our products to our customers and may reduce our revenue and profit margin. In addition, if our customers are unable to procure needed semiconductor components, this could reduce their demand for our products and reduce our revenue. The impact of semiconductor component shortages may increase in the near term as supplier and customer buffer inventories and safety stocks are exhausted.

Our primary strategic focus for several years has been technology and product leadership combined with close customer relationships in long-term healthy and growing markets. We believe this strategy is even more apt, and our long-term opportunity is not diminished, with COVID-19. We believe there are long-term opportunities, as the world’s experience with COVID-19 is driving an increasingly digital and virtual world touching all aspects of life and work that increasingly emphasizes communications systems, cloud services, augmented and virtual reality, and enhanced security. Additionally, ever advancing electronic devices are needed to consume, produce, and communicate digital and virtual content. All these trends could drive the need for higher volumes of higher performing optical devices that we could supply. As such, we expect to continue to invest strongly in new products, technology, and customer programs.

For more information on risks associated with the COVID-19 outbreak and regulatory actions, see the section titled “Risk Factors” in Item 1A of Part I.

Our consolidated financial statements are prepared in accordance with U.S. generally accepted accounting principles (“GAAP”) as set forth in the Financial Accounting Standards Board’s Accounting Standards Codification (“ASC”), and we consider the various staff accounting bulletins and other applicable guidance issued by the United States Securities and Exchange Commission (“SEC”). GAAP, as set forth within the ASC, requires us to make certain estimates, judgments and assumptions. We believe that the estimates, judgments and assumptions upon which we rely are reasonable based upon information available to us at the time that these estimates, judgments and assumptions are made. These estimates, judgments and assumptions can affect the reported amounts of assets and liabilities as of the date of the financial statements as well as the reported amounts of revenues and expenses during the periods presented. To the extent there are differences between these estimates, judgments or assumptions and actual results, our financial statements will be affected. The accounting policies that

reflect our more significant estimates, judgments and assumptions and which we believe are the most critical to aid in fully understanding and evaluating our reported financial results include the following:

Inventory is recorded at standard cost, which approximates actual cost computed on a first-in, first-out basis, not in excess of net realizable value. We assess the value of our inventory on a quarterly basis and write down those inventories which are obsolete or in excess of our forecasted demand to the lower of their cost or estimated net realizable value. Our estimates of forecasted demand are based upon our analysis and assumptions including, but not limited to, expected product lifecycles, product development plans and historical usage by product. Our product line management personnel play a key role in our excess review process by providing updated sales forecasts, managing product transitions and working with manufacturing to minimize excess inventory. If actual market conditions are less favorable than our forecasts, or actual demand from our customers is lower than our estimates, we may be required to record additional inventory write-downs. If actual market conditions are more favorable than anticipated, inventory previously written down may be sold, resulting in lower cost of sales and higher income from operations than expected in that period.

Pursuant to Topic 606, our revenues are recognized upon the application of the following steps:

The majority of our revenue comes from product sales, consisting of sales of Lasers and OpComms hardware products to our customers. Our revenue contracts generally include only one performance obligation. Revenues are recognized at a point in time when control of the promised goods or services are transferred to our customers upon shipment or delivery, in an amount that reflects the consideration we expect to be entitled to in exchange for those goods or services. We have entered into vendor managed inventory (“VMI”) programs with our customers. Under these arrangements, we receive purchase orders from our customers, and the inventory is shipped to the VMI location upon receipt of the purchase order. The customer then pulls the inventory from the VMI hub based on its production needs. Revenue under VMI programs is recognized when control transfers to the customer, which is generally once the customer pulls the inventory from the hub.

Revenue from all sales types is recognized at the transaction price. The transaction price is determined based on the consideration to which we will be entitled in exchange for transferring goods or services to the customer, adjusted for estimated variable consideration, if any. We typically estimate the impact on the transaction price for discounts offered to the customer for early payments on receivables or net of accruals for estimated sales returns. These estimates are based on historical returns, analysis of credit memo data and other known factors. Actual returns could differ from these estimates. We allocate the transaction price to each distinct product based on its relative standalone selling price. The product price as specified on the purchase order is considered the standalone selling price as it is an observable input that depicts the price as if sold to a similar customer in similar circumstances.

Taxes assessed by a governmental authority that are both imposed on and concurrent with a specific revenue-producing transaction, that are collected by us from a customer and deposited with the relevant government authority, are excluded from revenue. Our revenue arrangements do not contain significant financing components as our standard payment terms are less than one year.

If a customer pays consideration, or if we have a right to an amount of consideration that is unconditional before we transfer a good or service to the customer, those amounts are classified as deferred revenue or deposits received from customers which are included in other current liabilities or other long-term liabilities when the payment is made or when it is due, whichever is earlier.

Remaining performance obligations represent the transaction price allocated to performance obligations that are unsatisfied or partially unsatisfied as of the end of the reporting period. Unsatisfied and partially unsatisfied performance obligations consist of contract liabilities and non-cancellable backlog. Non-cancellable backlog includes goods and services for which customer purchase orders have been accepted that are scheduled or in the process of being scheduled for shipment. A portion of our revenue arises from vendor-managed inventory arrangements where the timing and volume of customer utilization is difficult to predict.

Hardware products regularly include warranties to the end customers such that the product continues to function according to published specifications. We typically offer a twelve-month warranty for most of our products. However, in some instances depending upon the product, specific market, product line and geography in which we operate, and what is common in the industry, our warranties can vary and range from six months to five years. These standard warranties are assurance type warranties and do not offer any services in addition to the assurance that the product will continue working as specified. Therefore, warranties are not considered separate performance obligations in the arrangement. Instead, the expected cost of the warranty is accrued as expense in accordance with authoritative guidance.

We provide reserves for the estimated costs of product warranties at the time revenue is recognized. We estimate the costs of our warranty obligations based on our historical experience of known product failure rates, use of materials to repair or replace defective products and service delivery costs incurred in correcting product failures. In addition, from time to time, specific warranty accruals may be made if unforeseen technical problems arise.

We record shipping and handling costs related to revenue transactions within cost of sales as a period cost.

We recognize the incremental direct costs of obtaining a contract, which consist of sales commissions, when control over the products they relate to transfers to the customer. Applying the practical expedient, we recognize commissions as expense when incurred, as the amortization period of the commission asset we would have otherwise recognized is less than one year.

We record accounts receivable when we have an unconditional right to consideration. Contract liabilities are recorded when cash payments are received or due in advance of performance. Contract liabilities consist of advance payments and deferred revenue, where we have unsatisfied performance obligations. Contract liabilities are classified as deferred revenue and customer deposits, and are included in other current liabilities within our Consolidated Balance Sheet. Payment terms vary by customer. The time between invoicing and when payment is due is not significant.

We disaggregate revenue by geography and by product. Refer to “Note 20. Operating Segments and Geographic Information” for a presentation of disaggregated revenue. We do not present other levels of disaggregation, such as by type of products, customer, markets, contracts, duration of contracts, timing of transfer of control and sales channels, as this information is not used by our CODM to manage the business.

In accordance with the authoritative guidance on accounting for income taxes, we recognize income taxes using an asset and liability approach. This approach requires the recognition of taxes payable or refundable for the current year and deferred tax liabilities and assets for the future tax consequences of events that have been recognized in our consolidated financial

statements or tax returns. The measurement of current and deferred taxes is based on provisions of the enacted tax law, and the effects of future changes in tax laws or rates are not anticipated.

The authoritative guidance provides for recognition of deferred tax assets if the realization of such deferred tax assets is more likely than not to occur based on an evaluation of both positive and negative evidence and the relative weight of the evidence. We consider future growth, forecasted earnings, future taxable income, the mix of earnings in the jurisdictions in which we operate, historical earnings, taxable income in prior years, if carryback is permitted under the law, and prudent and feasible tax planning strategies in determining the need for a valuation allowance. In the event we were to determine that we would not be able to realize all or part of our net deferred tax assets in the future, an adjustment to the deferred tax assets valuation allowance would be charged to earnings in the period in which we make such a determination, or goodwill would be adjusted at our final determination of the valuation allowance related to an acquisition within the measurement period. If we later determine that it is more likely than not that the net deferred tax assets would be realized, we would reverse the applicable portion of the previously provided valuation allowance as an adjustment to earnings at such time.

We are subject to income tax audits by the respective tax authorities of the jurisdictions in which we operate. The determination of our income tax liabilities in each of these jurisdictions requires the interpretation and application of complex, and sometimes uncertain, tax laws and regulations. The authoritative guidance on accounting for income taxes prescribes both recognition and measurement criteria that must be met for the benefit of a tax position to be recognized in the financial statements. If a tax position taken, or expected to be taken, in a tax return does not meet such recognition or measurement criteria, an unrecognized tax benefit liability is recorded. If we ultimately determine that an unrecognized tax benefit liability is no longer necessary, we reverse the liability and recognize a tax benefit in the period in which it is determined that the unrecognized tax benefit liability is no longer necessary.

The recognition and measurement of current taxes payable or refundable and deferred tax assets and liabilities requires that we make certain estimates and judgments. Changes to these estimates or a change in judgment may have a material impact on our tax provision in a future period.

Goodwill represents the excess of the purchase price of an acquired business over the fair value of the identifiable assets acquired and liabilities assumed. We test for impairment of goodwill on an annual basis in the fourth quarter and at any other time when events occur or circumstances indicate that the carrying amount of goodwill may not be recoverable.

We have the option to first assess qualitative factors to determine whether it is necessary to perform the quantitative goodwill impairment test. The qualitative factors we assess include long-term prospects of our performance, share price trends and market capitalization, and Company specific events. Unanticipated events and circumstances may occur that affect the accuracy of our assumptions, estimates and judgments. For example, if the price of our common stock were to significantly decrease combined with other adverse changes in market conditions, thus indicating that the underlying fair value of our reporting units may have decreased, we might be required to reassess the value of our goodwill in the period such circumstances were identified.

If we determine that as a result of the qualitative assessment that it is more likely than not (i.e., greater than 50% likelihood) that the fair value of a reporting unit is less than its carrying amount, then the quantitative test is required. Otherwise, no further testing is required. The quantitative goodwill impairment test requires us to estimate the fair value of our reporting units. If the carrying value of a reporting unit exceeds its fair value, the goodwill of that reporting unit is potentially impaired and we record an impairment loss equal to the excess of the carrying value of the reporting unit’s goodwill over its fair value, not to exceed the carrying amount of goodwill. The fair value of each of our goodwill reporting units is generally estimated using a combination of public company multiples and discounted cash flow methodologies.

Based on the impairment analysis performed in the fourth quarter of each year presented, the fair value of our reporting units substantially exceeded the carrying value; as such, our annual qualitative assessment did not indicate that a more detailed quantitative analysis was necessary.

In many cases, the accounting treatment of a particular transaction is specifically dictated by GAAP and does not require management’s judgment in its application. There are also areas in which management’s judgment in selecting among available alternatives would not produce a materially different result. Our senior management has reviewed our critical accounting policies and related disclosures with the Audit Committee of our board of directors.

Refer to “Note 2. Recently Issued Accounting Pronouncements” in the notes to consolidated financial statements.

OpComms net revenue increased by $144.9 million, or 10.6%, during fiscal 2020 compared to fiscal 2019, primarily driven by increased sales of Telecom and Datacom products, driven by the acquisition of Oclaro, as well as increased sales in 3D sensing products for mobile devices.

Lasers net revenue decreased by $31.6 million, or 16.2%, during fiscal 2020 compared to fiscal 2019, primarily due to decreased sales of our kilowatt class fiber lasers.

During our fiscal 2021, 2020 and 2019, net revenue generated from a single customer which represented 10% or greater of total net revenue is summarized as follows:

During fiscal 2021 compared to fiscal 2020, our net revenue from the Philippines grew due to an introduction of a new product to one of our large customers.

Gross margin in fiscal 2020 increased to 38.7% from 27.2% in fiscal 2019. The increase was primarily driven by better gross margins within Telecom, due to the acquisition of Oclaro, better gross margins within Datacom, due to the sale and exit of our Datacom transceiver module business which historically generated lower margins, increased revenue of our Datacom chip products, which have higher margins, and increased revenue of 3D sensing products for mobile devices, which have higher margins. In addition, in fiscal 2020, we had lower amortization of fair value adjustments related to the Oclaro acquisition of $48.8 million, as well as lower inventory and fixed asset write down charges due to product lines exit of $13.8 million.

We sell products in certain markets that are consolidating, undergoing product, architectural and business model transitions, have high customer concentrations, are highly competitive, are price sensitive and/or are affected by customer seasonal and mix variant buying patterns. We expect these factors to continue to result in variability of our gross margin.

Although the magnitude of the impact of COVID-19 on our business operations remains uncertain and difficult to predict, and this remains a highly dynamic situation, we have experienced, and we expect that we may continue to experience disruptions to our and our customers’ businesses that will adversely impact our business, financial condition and results of operations.

OpComms

OpComms gross margin in fiscal 2020 increased to 46.5% from 39.0% in fiscal 2019. The increase was primarily driven by better gross margins within Telecom, due to the acquisition of Oclaro, better gross margins within Datacom, due to the sale of our lower margin Datacom transceiver module business and increased revenue of our higher margin Datacom chip products, and increased revenue of 3D sensing products for mobile devices.

Lasers

Lasers gross margin in fiscal 2020 increased to 46.6% from 43.3% in fiscal 2019. This increase was primarily driven by the streamlining of our manufacturing supply chain related to our kilowatt class fiber products.

R&D expense increased by $14.0 million, or 7.6%, in fiscal 2020 compared to fiscal 2019. The increase in R&D expense was primarily due to an increase of $10.7 million in payroll related expense, mainly due to the acquisition of Oclaro, partially offset by the sale of our Datacom transceiver module business. In addition, we had an increase of $7.6 million in investments in key product lines and R&D materials. These increases were offset by $2.8 million higher non-recurring engineering credits from customers and government grants.

We believe that continuing our investments in R&D is critical to attaining our strategic objectives. Despite the uncertainty related to COVID-19 and the global economic outlook, we plan to continue to invest in R&D and new products that we believe will further differentiate us in the marketplace and expect our investment in R&D to increase in absolute dollars in future quarters.

SG&A expense increased by $34.9 million, or 17.4%, in fiscal 2020 compared to fiscal 2019. The increase in SG&A expense was primarily due to the increase in amortization of intangibles of $16.8 million and integration related costs of $9.2 million as a result of the Oclaro acquisition, as well as the increase in payroll related expense of $16.2 million, offset by lower discretionary travel and trade shows of $2.6 million, partially due to COVID-19 restrictions in third and fourth quarters of fiscal 2020.

From time to time, we expect to incur non-core expenses, such as mergers and acquisition-related expenses and litigation expenses, which will likely increase our SG&A expenses and potentially impact our profitability expectations in any particular quarter.

We have initiated various strategic restructuring events primarily intended to reduce costs, consolidate our operations, rationalize the manufacturing of our products and align our business in response to market conditions.

During fiscal 2020, we recorded $8.0 million in restructuring and related charges in our Consolidated Statements of Operations. The charges were mainly attributable to severance charges associated with the decision to move certain manufacturing from San Jose, California to our facility in Thailand.

Refer to “Note 14. Restructuring and Related Charges” in the notes to consolidated financial statements.

In the third quarter of fiscal 2019, we announced our plan to discontinue the development and manufacturing of future Datacom transceiver modules which impacted the California and China based Datacom module teams. As a result of these actions, we recorded impairment charges of $4.3 million and $30.7 million in fiscal 2020 and 2019, respectively, to our long-lived assets that were not deemed to be useful. While we expect strong growth in Datacom volumes in the future, gross margins at the transceiver market level are lower due to extreme competition. Following the Oclaro acquisition, we have a differentiated leadership position across a range of photonic chips on which the Datacom, wireless, and access markets critically rely.

For fiscal 2020, we recorded interest expense of $61.2 million. The increase in interest expense during fiscal 2020 as compared to fiscal 2019 was mainly driven by the increase in amortization of the debt discount and contractual interest expense due to the issuance of our 0.50% Convertible Notes due in 2026 (the “2026 Notes”), as well as the loss on early extinguishment of debt of $8.0 million, which represents the write-off of the issuance costs in conjunction with payback of our term loan facility in the second quarter of fiscal 2020.

Unrealized gain on Series A Preferred Stock derivative liability amounted to $8.8 million in fiscal 2019. On November 2, 2018, all 35,805 shares of our Series A Preferred Stock were converted to common stock with the outstanding balance of the embedded derivative liability reclassified to additional paid in capital. Due to this conversion, no further adjustments are required.

For further discussion of our derivative liability, see “Note 11. Non-Controlling Interest Redeemable Convertible Preferred Stock and Derivative Liability” in the notes to consolidated financial statements.

(1) The amounts of operating lease liabilities in the table above do not include any sublease income amounts nor do they include payments for short-term leases or variable lease payments. As of July 3, 2021, we expect to receive sublease income of approximately $3.6 million over the next three years. Refer to “Note 9. Leases” in the notes to consolidated financial statements.

(2) The amount in the preceding table represents planned contributions to our defined benefit plans. Although additional future contributions will be required, the amount and timing of these contributions will be affected by actuarial assumptions, the actual rate of returns on plan assets, the level of market interest rates, legislative changes, and the amount of voluntary contributions to the plan. Any contributions for the following fiscal year and later will depend on the value of the plan assets in the future and thus are uncertain. As such, we have not included any amounts beyond one year in the table above. Refer to “Note 18. Employee Retirement Plans” in the notes to consolidated financial statements.

(3) Purchase obligations represent legally-binding commitments to purchase inventory and other commitments made in the normal course of business to meet operational requirements. Refer to “Note 19. Commitments and Contingencies” in the notes to consolidated financial statements.

(4)  Includes principal and interest on our 0.25% Convertible Notes due in 2024 (the “2024 Notes”) through March 2024, and principal and interest on our 0.50% Convertible Notes due in 2026 (the “2026 Notes” and together with the 2024 Notes, the “Notes”) through December 2026. We have the right to redeem the 2024 Notes and the 2026 Notes in whole or in part at any time on or after March 15, 2024 and on or after December 15, 2026, respectively. The principal balances of our Notes are reflected in the payment periods in the table above based on their respective contractual maturities assuming no conversion.  Refer to “Note 12. Debt” in the notes to consolidated financial statements.

As of July 3, 2021, our other non-current liabilities also include $23.0 million of unrecognized tax benefit for uncertain tax positions. We are unable to reliably estimate the timing of future payments related to uncertain tax positions and therefore have excluded them from the preceding table.

We do not have any off-balance sheet arrangements, as such term is defined in rules promulgated by the SEC, that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that are material to investors.

The Company sponsors defined benefit pension plans covering employees in Japan, Switzerland, and Thailand. Pension plan benefits are based primarily on participants’ compensation and years of service credited as specified under the terms of each country’s plan. Employees are entitled to a lump sum benefit upon retirement or upon certain instances of termination. The funding policy is consistent with the local requirements of each country. As of July 3, 2021, a defined benefit plan in Switzerland was partially funded, while defined benefit plans in Japan and Thailand were unfunded. As of July 3, 2021, our projected benefit obligations, net in Japan, Switzerland, and Thailand were $2.9 million, $4.8 million, and $3.1 million,

respectively. They were recorded in our Consolidated Balance Sheets as other non-current liabilities and represent the total projected benefit obligation (“PBO”) less the fair value of plan assets.

As of July 3, 2021 and June 27, 2020, our cash and cash equivalents of $774.3 million and $298.0 million, respectively, were largely held in the United States. As of July 3, 2021 and June 27, 2020, our short-term investments of $1,171.7 million and $1,255.8 million, respectively, were all held in the United States. Cash equivalents and short-term investments are primarily comprised of money market funds, treasuries, agencies, high quality investment grade fixed income securities, certificates of deposit, and commercial paper. Our investment policy and strategy is focused on the preservation of capital and supporting our liquidity requirements.

The total amount of cash outside the United States held by the non-US entities as of July 3, 2021 was $113.3 million, which was primarily held by entities incorporated in the United Kingdom, the British Virgin Islands, Japan, Hong Kong, China, Canada, and Thailand. Although the cash currently held in the United States as well as the cash generated in the United States from future operations is expected to cover our normal operating requirements, a substantial amount of additional cash could be required for other purposes, such as capital expenditures to support our business and growth, including costs associated with increasing internal manufacturing capabilities, particularly in our Thailand facility, strategic transactions and partnerships, and future acquisitions.

Our intent is to indefinitely reinvest funds held outside the United States and, except for the funds held in the Cayman Islands, the British Virgin Islands, Japan and Hong Kong, our current plans do not demonstrate a need to repatriate them to fund our domestic operations. However, if in the future, we encounter a significant need for liquidity domestically or at a particular location that we cannot fulfill through borrowings, equity offerings, or other internal or external sources, or the cost to bring back the money is not significant from a tax perspective, we may determine that cash repatriations are necessary or desirable. Repatriation could result in additional material taxes. These factors may cause us to have an overall tax rate higher than other companies or higher than our tax rates have been in the past. Additionally, if conditions warrant, we may seek to obtain additional financing through debt or equity sources. To the extent we issue additional shares, our existing stockholders may be diluted. However, any such financing may not be available on terms favorable to us, or may not be available at all.

Liquidity and Capital Resources Requirements

Fiscal 2021

As of July 3, 2021, our consolidated balance of cash and cash equivalents increased by $476.3 million, to $774.3 million from $298.0 million as of June 27, 2020. The increase in cash and cash equivalents was mainly due to cash provided by operating activities of $738.7 million and investing activities of $1.0 million, offset by cash used in financing activities of $263.4 million during the year ended July 3, 2021.

Cash provided by operating activities was $738.7 million during the year ended July 3, 2021. Our net income was $397.3 million for the year ended July 3, 2021 and included the merger termination fee paid by Coherent, net of related costs of $207.5 million. Cash provided by operating activities was also generated from $339.9 million of non-cash items (such as depreciation, stock-based compensation, amortization of intangibles, amortization of debt discount and debt issuance costs on our Notes, and other non-cash charges), offset by $1.5 million of changes in our operating assets and liabilities.

Cash provided by investing activities of $1.0 million during the year ended July 3, 2021 was primarily attributable to proceeds from maturities and sales of short-term investment, net of purchases of $71.2 million and proceeds from sales of product lines of $1.3 million and sales of property and equipment of $23.3 million. However, we had capital expenditures of $84.8 million and a payment for an asset acquisition of $10.0 million.

Cash used in financing activities of $263.4 million during the year ended July 3, 2021, was primarily resulted from the repurchase of shares of our common stock of $236.0 million and tax payments related to restricted stock of $39.7 million, offset by the proceeds from employee stock plans of $12.6 million.

Fiscal 2020

As of June 27, 2020, our consolidated balance of cash and cash equivalents decreased by $134.6 million, to $298.0 million from $432.6 million as of June 29, 2019. The decrease in cash and cash equivalents was mainly due to cash used in investing activities of $987.7 million, offset by cash provided by operating activities of $524.3 million and cash provided by financing activities of $328.8 million during the year ended June 27, 2020.

Cash provided by operating activities of $524.3 million during the year ended June 27, 2020, primarily resulted from $323.4 million of non-cash items (such as depreciation, stock-based compensation, amortization of intangibles, amortization of debt discount and debt issuance costs on our term loan and the Notes, and other non-cash items), net income of $135.5 million, and $65.4 million of changes in our operating assets and liabilities.

Cash used in investing activities of $987.7 million during the year ended June 27, 2020, was primarily attributable to purchases of short-term investments, net of sales and maturities of $917.8 million. In addition, we had capital expenditures of $86.0 million, payment for asset acquisitions of $4.0 million, offset by proceeds from sales of product lines of $20.1 million.

Cash provided by financing activities of $328.8 million during the year ended June 27, 2020, primarily resulted from the proceeds of the issuance of the 2026 Notes of $1,042.2 million, net of issuance costs, offset by repayment of our term loan facility of $497.5 million and the repurchase of shares of our common stock of $200.0 million.

Fiscal 2019

As of June 29, 2019, our consolidated balance of cash and cash equivalents increased by $35.3 million, to $432.6 million from $397.3 million as of June 30, 2018. The increase in cash and cash equivalents was mainly due to cash provided by financing activities of $485.1 million, primarily related to $490.8 million in proceeds from a term loan, net of debt issuance costs, used to fund the Oclaro acquisition, and cash provided by operating activities of $330.1 million during the year ended June 29, 2019; which was offset by cash used in investing activities of $779.7 million, principally related to net cash of $619.8 million paid to acquire Oclaro.

Cash provided by operating activities of $330.1 million during the year ended June 29, 2019, primarily resulted from $314.4 million of non-cash items (such as depreciation, stock-based compensation, amortization of intangibles, amortization of discount on the 2024 Notes, amortization of the debt issuance costs on the term loan, amortization of fair value adjustment in connection with the acquisition of Oclaro, impairment charges, net of unrealized gain on derivative liability and other non-cash items) and $52.1 million of changes in our operating assets and liabilities, offset by our net loss of $36.4 million.

Cash used in investing activities of $779.7 million during the year ended June 29, 2019, was primarily attributable to $619.8 million paid to acquire all outstanding shares of common stock of Oclaro, net of cash received through the acquisition of Oclaro. In addition, we had capital expenditures of $166.0 million (mainly attributable to the purchase of the property for $54.6 million), payment for asset acquisitions of $1.3 million, purchases of short-term investments, net of sales of $18.1 million, offset by proceeds from sales of product lines of $25.5 million.

Cash provided by financing activities of $485.1 million during the year ended June 29, 2019, primarily resulted from $490.8 million of proceeds from a term loan, net of debt issuance costs, used to partially finance the Oclaro acquisition, offset by the repayment of a term loan of $2.5 million. In addition, we received $9.3 million from the issuance of common stock under our employee stock plan, offset by the repayment of finance lease obligations of $8.8 million, tax payments related to restricted stock of $2.4 million, a payment of an acquisition related holdback of $1.0 million, and dividend payments on our Series A Preferred Stock of $0.7 million.

In addition, all of the below market risks are heightened in light of the current market situation. Foreign exchange markets could be impacted and cause significant fluctuations in our future expenses. The price of our common stock has fluctuated significantly in the past and global equity markets are experiencing significant volatility following the COVID-19 outbreak. Interest rates have already reduced dramatically since the onset of the outbreak, and our future income from these investments likely will be negatively impacted in the future.

Foreign Exchange Risk

We conduct our business and sell our products to customers primarily in Asia, Europe, and North America. Due to the impact of changes in foreign currency exchange rates between the U.S. Dollar and foreign currencies, for the fiscal years ended July 3, 2021, June 27, 2020, and June 29, 2019, we recorded foreign exchange losses, net of $4.4 million, $1.4 million, and $0.6 million, respectively, in the other income (expense), net in the Consolidated Statements of Operations.

Although we sell primarily in the U.S. Dollar, we have foreign currency exchange risks related to our expenses denominated in currencies other than the U.S. Dollar, principally the Chinese Yuan, Canadian Dollar, Thai Baht, Japanese Yen, UK Pound, Swiss Franc and Euro. The volatility of exchange rates depends on many factors that we cannot forecast with reliable accuracy. In the event our foreign currency denominated assets, liabilities, sales or expenses increase, our operating results may be more greatly affected by fluctuations in the exchange rates of the currencies in which we do business.

Equity Price Risk

We are exposed to equity price risk related to the conversion options embedded in our 2026 Notes and 2024 Notes.

We issued the 2026 Notes in December 2019 and the 2024 Notes in March 2017 with an aggregate principal amount of $1,050 million and $450 million, respectively. Both the 2026 Notes and the 2024 Notes are carried at face value less amortized discount on the Consolidated Balance Sheet. The 2026 Notes and the 2024 Notes bear interest at a rate of 0.50% and 0.25% per year, respectively. Since the Notes bear interest at fixed rates, we have no financial statement risk associated with changes in market interest rates. However, the potential value of the shares to be distributed to the holders of our Notes changes when the market price of our stock fluctuates. The 2026 Notes will mature on December 15, 2026, unless earlier repurchased by us or converted pursuant to their terms, at a conversion price of approximately $99.29 per share. The 2024 Notes will mature on March 15, 2024, unless earlier repurchased by us or converted pursuant to their terms, at a conversion price of approximately $60.62 per share.

Interest Rate Fluctuation Risk

Bank Liquidity Risk

As of July 3, 2021, we had approximately $128.3 million of unrestricted cash (excluding cash equivalents) in operating accounts that are held with domestic and international financial institutions. These cash balances could be lost or become inaccessible if the underlying financial institutions fail or if they are unable to meet the liquidity requirements of their depositors and if they are not supported by the national government of the country in which such financial institution is located. Notwithstanding, we have not incurred any losses to date and have had full access to our operating accounts. We believe any failures of domestic and international financial institutions could impact our ability to fund our operations in the short term.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Opinion on the Financial Statements

Change in Accounting Principle

Basis for Opinion

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

The Company assesses the value of inventory and writes down those inventories which are obsolete or in excess of forecasted demand to the lower of their cost or estimated net realizable value. The Company’s estimates of forecasted demand are based upon analysis and assumptions including, but not limited to, expected product lifecycles, product development plans and historical usage by product.

We identified the valuation of inventory as a critical audit matter because of the significant assumptions management makes with regards to estimating the excess and obsolete write downs. This required a high degree of auditor judgment and an increased extent of effort when performing audit procedures to evaluate the reasonableness of management’s estimates of forecasted demand.