Unusual Machines (UMAC) S-1IPO registration

Table of Contents

As filed with the Securities and Exchange Commission on April 10, 2024

Registration No. 333-[_____]

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM S-1
REGISTRATION STATEMENT
UNDER THE SECURITIES ACT OF 1933

Unusual Machines, Inc.

(Exact name of Registrant as specified in its charter)

4677 L B McLeod Rd

Suite J

Orlando, FL 32811

(855) 921-4600

(Address, including zip code, and telephone number, including area code, of Registrant’s principal executive offices)

Allan Evans
Chief Executive Officer
Unusual Machines, Inc.

4677 L B McLeod Rd

Suite J

Orlando, FL 32811

(855) 921-4600

(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

Michael Harris, Esq.
Edward Schauder, Esq.
Nason, Yeager, Gerson, Harris & Fumero, P.A.
3001 PGA Boulevard, Suite 305
Palm Beach Gardens, Florida 33410
(561) 686-3307

Approximate date of commencement of proposed sale to the public: As soon as practicable after the effective date of this registration statement.

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box. ☒

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act of 1933, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act of 1933, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act of 1933, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act of 1934.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act. ☐

The Registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this Registration Statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, or until the Registration Statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to Section 8(a), may determine.

The information in this Prospectus is not complete and may be changed. The Selling Stockholders may not sell these securities until the Registration Statement filed with the Securities and Exchange Commission is declared effective. This Prospectus is not an offer to sell these securities and it is not soliciting an offer to buy these securities in any state where the offer or sale is not permitted.

SUBJECT TO COMPLETION, DATED April 10, 2024

UNSUAL MACHINES, INC.

PROSPECTUS

940,719 Shares of Common stock

On February 16, 2024, the Company closed its Initial Public Offering (the “IPO”) of 1,250,000 shares of common stock at a public offering price of $4.00 per share. Simultaneous with the closing of the IPO, the Company acquired Fat Shark Ltd. (“Fat Shark”) and Rotor Riot, LLC (“Rotor Riot”) from Red Cat Holdings, Inc. (“Red Cat”).

This Prospectus relates to the offering and resale by Red Cat, our largest stockholder, of 500,000 shares of our common stock (the “Acquisition Shares”) that Red Cat received as part of consideration in connection with our acquisition of Rotor Riot and Fat Shark. We are obligated to register the Acquisition Shares pursuant to a Registration Rights Agreement that we entered into with Red Cat on February 16, 2024. This Prospectus also relates to the offering and resale the certain other selling stockholders identified herein (collectively, with Red Cat, the “Selling Stockholders”) of up to 940,719 shares of our common stock (the “Shares”) that were acquired by such selling stockholders in private placements or in private transactions with an insider of the Company prior to the IPO. The Shares and the Acquisition Shares are collectively referred to herein as the “Securities.”

The Company is not selling any securities in this offering, and therefore will not receive any proceeds from the sale of the Securities by the Selling Stockholders.

We have agreed to pay the expenses of the registration of the Securities offered and sold under the Registration Statement by the Selling Stockholders. Each Selling Stockholder will pay any commissions or discounts applicable to the Securities it sells.

Our common stock is traded on the New York Stock Exchange American (“NYSE American”) under the symbol “UMAC.” On April 9, 2024, the last reported sale price of our common stock on the NYSE American was $1.82.

Investing in our securities involves various risks. See “Risk Factors” beginning on page 6 of this Prospectus for a discussion of information that should be considered in connection with an investment in our securities.

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this Prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

The date of this Prospectus is April 10, 2024

Table of Contents

You should rely only on information contained in this Prospectus. We have not authorized anyone to provide you with information that is different from that contained in this Prospectus. The Selling Stockholders are not offering to sell or seeking offers to buy securities in jurisdictions where offers and sales are not permitted. We are responsible for updating this Prospectus to ensure that all material information is included and will update this Prospectus to the extent required by law.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Prospectus, contains forward-looking statements that involve risks and uncertainties. We make such forward-looking statements pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and other federal securities laws. All statements other than statements of historical facts contained in this Prospectus are forward-looking statements. In some cases, you can identify forward-looking statements by terminology such as “may”, “will”, “should”, “expects”, “intends”, “plans”, “anticipates”, “believes”, “estimates”, “predicts”, “potential”, “continue” or the negative of these terms or other comparable terminology.

Forward-looking statements are neither historical facts nor assurances of future performance, and are based only on our current beliefs, expectations and assumptions regarding the future of our business, future plans and strategies, projections, anticipated events and trends, the economy and other future conditions. Because forward-looking statements relate to the future, they are subject to inherent uncertainties, risks and changes in circumstances that are difficult to predict and many of which are outside of our control. Therefore, you should not rely on any of these forward-looking statements. Important factors that could cause our actual results and financial condition to differ materially from those indicated in the forward-looking statements include, among others, the following:

You should read this Prospectus and the documents we have filed as exhibits to the Registration Statement, of which this Prospectus is a part, completely and with the understanding that our actual future results may be materially different from what we expect. You should not assume that the information contained in this Prospectus or any prospectus supplement is accurate as of any date other than the date on the front cover of those documents.

Risks, uncertainties and other factors that may cause our actual results, performance or achievements to be different from those expressed or implied in our written or oral forward-looking statements may be found in this Prospectus under the heading “Risk Factors.”

Forward-looking statements speak only as of the date they are made. You should not put undue reliance on any forward-looking statements. We assume no obligation to update forward-looking statements to reflect actual results, changes in assumptions or changes in other factors affecting forward-looking information, except to the extent required by applicable securities laws. If we do update one or more forward-looking statements, no inference should be drawn that we will make additional updates with respect to those or other forward-looking statements. New factors emerge from time to time, and it is not possible for us to predict which factors will arise. In addition, we cannot assess the impact of each factor on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. We qualify all of the information presented in this Prospectus particularly our forward-looking statements, by these cautionary statements.

PROSPECTUS SUMMARY

Background of Unusual Machines

Unusual Machines, Inc. (“Unusual Machines” or the “Company”) is a Puerto Rico corporation, originally incorporated July 11, 2019, with our principal place of business in Orlando, Florida. The Company was incorporated in Puerto Rico under the name “Red Cat Motor Corporation” on July 11, 2019, before changing its name to “AerocarveUS Corporation” on October 20, 2020 and then to “Unusual Machines, Inc.” on July 5, 2022. The Company is in the process of reincorporating as a Nevada corporation.

Initial Public Offering

On February 16, 2024, the Company closed its IPO of 1,250,000 shares of common stock at a public offering price of $4.00 per share. The shares of common stock are traded on the NYSE American. Simultaneous with the closing of the IPO, the Company acquired Fat Shark and Rotor Riot from Red Cat.

The Business Combination & Business Overview

On November 21, 2022, the Company entered into a Share Purchase Agreement (the “Purchase Agreement”) with Red Cat and Jeffrey Thompson, the founder and Chief Executive Officer of Red Cat, pursuant to which we agreed to purchase Red Cat’s consumer business consisting of Fat Shark and Rotor Riot (the “Business Combination”). Under the terms of the Purchase Agreement, as amended, the Company purchased Rotor Riot and Fat Shark subsidiaries for $20.0 million (the “Purchase Price”) comprised of (i) $1.0 million in cash, (ii) a $2.0 million promissory note (the “Note”) issued by the Company to Red Cat, and (iii) $17.0 million of the Company’s common stock or 4,250,000 shares of common stock at the $4.00 per share IPO price.

Fat Shark is a leader in designing and manufacturing ultra-low latency first-person-view (“FPV”) video goggles for drone pilots, which it markets towards retail distributors including Rotor Riot.

Rotor Riot is a rapidly growing e-commerce marketplace, backed by the largest community of FPV drone pilots in the world and retails FPV drones and goggles, parts, tools, drone components, and accessories manufactured by third-parties.

Unusual Machines specializes in the production and sale of small drones and essential components and with the acquisitions of Fat Shark and Rotor Riot, it brings brand recognition and a strong curated retail channel in the FPV drone market segment. Unusual Machines intends to build its business both organically and through strategic acquisitions that leverage our retail business to onshore production of critical drone components. With the transition to onshoring production of drone components, the Company intends to expand into B2B channels for customers that require a domestic supply chain.

The Drone Industry

The drone industry continues to expand to become a powerful business tool and recreational activity, with growth occurring broadly and across our targeted industries. According to Drone Industry Insights, the global drone market is expected to grow to $54.6 billion by 2030, with the commercial market growing at a 7.7% compound annual growth rate (“CAGR”). According to Allied Market Research, the drone component industry is likewise expanding. The drone flight controller market, valued at $15.53 billion in 2021 is expected to reach $28.86 billion by 2031. The drone motor market, valued at $2.6 billion in 2021 is projected to reach $9.9 billion by 2031.

Unusual Machines intends to pursue strategic acquisition targets that are cash flow positive and either sell drone parts or allow us to vertically integrate the production of drone parts. The Company believes that very promising, private companies (such as those the company will likely target) are in many instances underfunded and missing out on the ability to go public and bring their innovative products and solutions to a larger set of customers globally. We believe that unlocking this potential will be key to industry consolidation and breaking the dominance of China in the drone industry.

First Person View (FPV) Market Segment

Fat Shark and Rotor Riot principally operate in the FPV segment of the drone industry. This segment focuses on drones piloted with wearable display devices. These are head mounted displays (“HMDs”) or goggles for drone pilots. These goggles give pilots FPV perspective to control their drone in flight. This is a unique experience where the pilot is interacting with an aircraft through visual immersion. This experience is accomplished by live streaming footage from a camera mounted on the nose of the drone directly into specially designed goggles worn by the pilot. The image is transmitted via radio (traditionally analog but increasingly digital) to the pilot. The drone remote control unit, the drone, and the FPV goggles are all interconnected via radio. This effect requires sophisticated electronics that transmit visual information with sufficient speed and reliability to allow pilot control over the drone in real-time. Pilots routinely achieve speeds of over 90 mph in racing and other mission critical applications.

There are four common categories of FPV flight – freestyle flight, racing, cinema photography, and defense. In freestyle, the pilot navigates around obstacles focused on acrobatics and exploring the environment around the aircraft through the HMD. FPV racing describes a spectator sport where pilots fly their drones in competitions through a series of obstacles, flags, and gates in a racetrack. Cinema photography is the process of viewing and recording a subject matter from the air from the viewpoint of the pilot. Defense is a newer market segment characterized by the use cases emerging in the Ukrainian conflict.

Plans for Growth, Development, and Expansion

Unusual Machine’s plans to strengthen its market position through continued organic revenue growth. In parallel, the Company intends to aggressively invest in the extension of their business from just B2C sales to B2B sales of drone components. Unusual Machine’s business strategy includes (i) increasing its overall customer base with its products and rapid adoption; (ii) investing in new products and IP, starting with the Fat Shark and Rotor Riot acquisitions that were completed with our IPO, (iii) expanding and growing Unusual Machine’s customer base and revenue streams from its existing customer base using a “land-and-expand” model that establishes initial relationships and grows those relationships through the provision of high quality products and services, (iv) enhancing the company’s products to improve the integration of third-party solutions, and (v) seeking strategic partnerships and sponsorships with companies that want access to the FPV community.

For more information, see “Business” beginning on page 40 of this Prospectus.

THE OFFERING

Summary Risk Factors

Our business and an investment in our common stock are subject to numerous risks and uncertainties, including those highlighted in this “Risk Factors” section below. Some of these risks include:

Risks Related to our Business and Financial Condition

Risks Related to Our Sale of Drone-Related Products and Operations in the Drone Industry

Risks Related to Intellectual Property Protection

Risks Related to Government Regulation of Our Operations and Industry

Risks Related to Our Common Stock

RISK FACTORS

Investing in our common stock involves a high degree of risk. Investors should carefully consider the following Risk Factors before deciding whether to invest in the Company. Additional risks and uncertainties not presently known to us, or that we currently deem immaterial, may also impair our business operations or our financial condition. If any of the events discussed in the Risk Factors below occur, our business, consolidated financial condition, results of operations or prospects could be materially and adversely affected. In such case, the value and marketability of our securities could decline.

Risks Related to our Business and Financial Condition

Because Fat Shark and Rotor Riot’s auditors have qualified their reports on a going concern basis and with our history of losses, we may not be able to continue operating as a going concern.

We have experienced losses from operations since inception and have never generated positive cash flow. The success of our business plan during the next 12 months and beyond will be contingent upon generating sufficient revenue to cover our operating costs. The reports from Fat Shark and Rotor Riot’s independent registered public accounting firm for the fiscal year ended April 30, 2023 and prior years include an explanatory paragraph stating Fat Shark and Rotor Riot have each recurring net losses from operations, negative operating cash flows, and will need additional working capital for ongoing operations. These factors, among others, raise substantial doubt about each of our ability to continue as a going concern. We believe that the net proceeds from our recent IPO in February 2024 and our existing cash will be sufficient to fund our current operating plans through at least the next 12 months. We have based these estimates, however, on assumptions that may prove to be wrong, and we could spend our available financial resources much faster than we currently expect and need to raise additional funds sooner than we anticipate.

Because the Company had a very limited operating history prior to its acquisition of Fat Shark and Rotor Riot, any investment in us is highly speculative.

We completed our acquisitions of Fat Shark and Rotor Riot simultaneously with the closing of our IPO in February 2024. Both companies, prior to the completion of the acquisitions, were operated by Red Cat since their acquisition by Red Cat in 2020. While the management of each company is expected to remain, no Red Cat officer, other than Dr. Allan Evans who became our Chief Executive Officer in December 2023, is joining us. Our management team will be headed by our executive officers including Adrew Camden, our new Chief Operating Officer who joined us from Rotor Riot together with individuals from Fat Shark and Rotor Riot, and our operations going forward are therefore subject to ordinary integration risks where two companies and two cultures are combined. Further, we may not accurately forecast customer behavior and recognize or respond to emerging trends, changing preferences or competitive factors facing us, and, therefore, we may fail to make accurate financial forecasts. Our current and future expense levels are based largely on our budgeted plans and estimates of future revenue. Similarly, if we are able to raise additional funds in future financing transactions, we may use a portion of those proceeds to acquire other operating businesses in our industry or in related industries to facilitate strategic growth and build our market presence and revenue potential. If we do acquire one or more businesses in the future, we may be unable to adjust our spending in a timely manner to compensate for any unexpected revenue shortfall, which could then force us to curtail our business operations or plan of operations or acquisitions.

Additionally, our current revenue projections are based largely on customer and partner relationships and contracts that are still the subject of negotiation, the results of which remain uncertain. In addition to having no experience as a public company, our new operations will be subject to the risk of a lack of diversification, as today we are limited to drone products designed for consumer or recreational use rather than military or industrial applications. In the future, we may diversify our products beyond the consumer and recreational use but the timeline and success of those efforts are uncertain. Our new subsidiaries will lack the support they previously had in terms of their product development and production efforts, as they can no longer access the more vertically integrated resources that were available to them at Red Cat. The risk of this occurring will intensify if a recession occurs in the U.S. or global economy, as our future business is aimed at consumers whose spending patterns will likely decline as a result of inflation and the prospect of an economic downturn.

Fat Shark and Rotor Riot must be considered in light of the uncertainties, risks, expenses, and difficulties frequently encountered by companies in their early stages of operations, integration and growth process. Due to these contingencies, we may be unable to achieve or maintain profitability in some or all of our business segments in a timely manner or at all.

The Company may be unable to repay indebtedness

As part of the acquisition Purchase Price, we issued a $2.0 million Note to Red Cat.

The Note bears interest at 8%. Interest is payable monthly in arrears on the 15th day of each month commencing on March 15, 2024. The principal amount of the note is payable in a lump sum on August 16, 2025. In the event of a qualified financing of debt or equity where the Company receives net proceeds of $5.0 million in one or more related transactions, Red Cat may require the Company to repay the Note with accrued interest thereon in cash. Upon an event of default, Red Cat may require the Company to convert the Note into shares of our common stock, subject to beneficial ownership limitations set forth in the Note, at a conversion price equal to an amount of the 10 day average VWAP, as defined in the Note prior to the conversion date.

On the closing date of the consummation of the acquisition, the parties to the agreed to defer the requirement to provide the Estimated Working Capital Statement (as defined in the Purchase Agreement) and the calculations of the Estimated Working Capital (as defined in the Purchase Agreement), and as applicable, the Estimated Working Capital Excess Amount (as defined in the Purchase Agreement) or the Estimated Working Capital Deficiency Amount (as defined in the Purchase Agreement) required by Section 2.04(a) of the Purchase Agreement. Rather, the parties agreed that their respective financial teams will deliver estimated or agreed upon actual calculations of the foregoing (based on the book value of physical inventory and fair value of any transition inventory in accordance with Generally Accepted Accounting Principles) on or before May 17, 2024 (the “Calculation Date”). Any disputes with respect to any calculations including the failure to agree on such calculations by the Calculation Date (unless the Parties shall agree to an extension of the Calculation Date in writing) shall be resolved by an Independent Accounting Firm and the mechanics set forth in Section 2.04(c) of Purchase Agreement. No payments or adjustments related to Working Capital was made on the Closing Date. In the event that after determining the actual Working Capital calculation, any actual Working Capital Excess Amount, at Red Cat’s option, will be paid in cash or will increase the principal amount of the Note and any actual Working Capital Deficiency Amount will, at Red Cat’s option, will be paid in cash or will reduce the principal amount of the Note dollar for dollar. This potentially can adversely impact our liquidity or increase the amount of our indebtedness.

In order to repay the Note we will need to expend proceeds, obtain additional debt financing, or refinance the Note. There is no guarantee that any refinancing or debt financing will be successful or on favorable terms. Any additional convertible debt or equity financings may be dilutive to our stockholders, and such dilution may be significant based upon the size of such financing. Further, because of our lack of operating history, we may be unable to generate enough capital to fulfill the obligations under the Note issued to Red Cat. If we fail to repay the Note, Red Cat may exercise all rights and remedies owed to it under the Note, including conversion of the Note. If Red Cat converts the Note, our stockholders will experience dilution.

Fat Shark and Rotor Riot have incurred net losses since their acquisition by Red Cat and may fail to achieve or maintain profitability.

Since their acquisition by Red Cat in 2020, Fat Shark and Rotor Riot incurred net losses for each reported quarter with the exception of Fat Shark which reported a small net income in the quarter ended July 31, 2022. Further, Unusual Machines was formed in July 2019 and has not conducted any active business. Following our acquisition of Fat Shark and Rotor Riot, their operations constitutes our business. Further, Fat Shark had lower revenues in fiscal year 2023 compared to fiscal year 2022, and Rotor Riot had higher net losses in fiscal year 2023 compared to fiscal year 2022, and generally experiences fluctuating revenue as a result of recurring seasonal sales cycles. We will need to generate higher revenues and control operating costs in order to attain profitability. There can be no assurances that we will be able to do so or to reach profitability.

We expect to continue to incur losses for the foreseeable future and we expect costs to increase in future periods as we expend substantial financial and other resources on, among other things:

These expenditures may not result in additional revenue or the growth of our business in the manner or to the extent anticipated or intended or at all. If we fail to grow revenue or to achieve or sustain profitability, our business, financial condition, results of operations, and prospects could be materially adversely affected and the market price of our common stock could be adversely affected.

If the proceeds from the IPO are insufficient to meet our working capital needs, and if we are then not able to obtain sufficient capital, we may be forced to limit the scope of our operations.

We expect that our existing cash and net proceeds received from our recent IPO will be sufficient to meet our working capital needs for at least 12 months. However, our future business is aimed at consumers who face inflation and the possibility of a recession. Accordingly, we may require substantial additional working capital.

There can be no assurance that our businesses will reach profitability. If adequate additional debt and/or equity financing is not available on reasonable terms or at all, then we may not be able to continue to develop our business activities, and we will have to modify our business plan. These factors could have a material adverse effect on our future operating results and our financial condition.

Our ability to raise financing through sales of equity linked securities depends on general market conditions and the demand for our common stock. To the extent that we raise additional capital through the sale of equity or convertible debt securities, the ownership interest of stockholders will be diluted, and the terms may include liquidation or other preferences that adversely affect the rights of existing stockholders. Debt transactions often include restrictive covenants that could limit our ability to engage in strategic transactions, acquire complimentary businesses, or adjust to changing market environments as quickly or efficiently as we otherwise would or at all. Further, if adequate financing is not available or is unavailable on acceptable terms, we may find we are unable to fund our planned expansion, continue offering the Fat Shark and Rotor Riot products, take advantage of acquisition opportunities, develop or enhance or products, or to respond to competitive pressures in the industry which may jeopardize our ability to continue operations.

If we lose key personnel, it may adversely affect our business.

Our future success depends in large part on the continued contributions of our executive officers, members of senior management and other key personnel, particularly Dr. Allan Evans, our Chief Executive Officer. Dr. Evans’ leadership, knowledge and experience in the drone industry is expected to be crucial to our business plan and any future successes and progress we experience. The loss of Dr. Evans’ services would therefore materially adversely affect our business and prospects. As a condition to the consummation of the IPO, we obtained “key person” insurance for Dr. Evans but not for any other officers or employees. Our executive officers, senior management and key personnel are all employed on an at-will basis, which means that they could terminate their employment with us at any time, for any reason and without notice. The loss of any of our key management personnel could significantly delay or prevent the achievement of our development and strategic objectives and adversely affect our business.

Conflicts of interest involving our Board and other parties could materially harm our business.

Our Board on which we heavily depend are or may become involved in other endeavors giving rise to conflicts of interests that are adverse to the Company. See “Management” and “Corporate Governance.” Mr. Jeffrey Thompson, a member of our Board, also has significant roles and interests in the drone industry outside our Company. These arrangements could cause him to be unable or decline to devote sufficient time and attention to our Company at the expense of these other ventures, and/or to face a conflict of interest, financial or otherwise, adverse to us and in favor of these other ventures. Accordingly, from time-to-time our directors may not devote sufficient time and attention to our affairs, which could have a material adverse effect on our operating results, and there can be no assurance that other conflicts of interest will not arise from their other business ventures, any of which could materially and adversely impact our business. Some of the Selling Stockholders acquired their Share in privately negotiated agreements with Mr. Thompson prior to the consummation of the IPO.

In addition, the primary contract manufacturer for Fat Shark headsets is Shenzhen Fat Shark Co Ltd. (the “Supplier”), a company located in China which is majority-owned by Molly Mo, who is the wife of Greg French, founder and former owner of Fat Shark prior to its acquisition by Red Cat. Mr. French is no longer affiliated with Fat Shark.

Finally, Rotor Riot offers a variety of drone products through its website, which includes a number of product offerings from competitors in the drone industry. While these relationships have enabled us to generate revenue, by virtue of their involvement in the sale of drones and drone-related products these customers also have interests that are adverse to ours, and may determine to reduce their expenditures on our products in the future and/or to vertically integrate their operations to reduce or eliminate their reliance on our products.

Any of the foregoing developments could result in materially adverse consequences to our Company, results of operations and financial condition.

If we are unable to attract new customers or maintain and grow Fat Shark and Rotor Riot existing customer relationships in a manner that is cost-effective, our revenue growth could be slower than we expect and our business may be harmed.

To increase our revenue following the acquisition of Fat Shark and Rotor Riot, we must add new customers, upsell to our existing customers, enhance our products with features that set us apart from our competitors, and effectively develop and market new products that enable us to maintain and expand our brand and market share. Demand for our products is affected by a number of factors, many of which are beyond our control. Additionally, the projections and estimates about the future success and growth of the drone industry and demand for drone-related products such as ours, could prove to be incorrect, in which case our results of operations and prospects will decline. For example, if a recession occurs in the U.S. or global economy, we expect that consumer spending, particularly for non-essential goods such as our drone products which are largely focused on recreational uses, may decline, limiting our ability to attract or maintain a sufficient customer base to achieve or maintain the revenue we seek in the development and sale of our products. Even if we do attract customers, the cost of new customer acquisition may prove so high as to prevent us from achieving or sustaining profitability.

Our future success also depends on our ability to increase the use of our products and solutions within and across our existing customers and future customers. While we believe there is a significant opportunity to further expand within Fat Shark and Rotor Riot’s existing customer base, including due to our planned employment of a “land-and-expand” business model in which we plan to establish relationships with new customers and grow those relationships over time by providing high quality products and services, our growth prospects depend on our ability to persuade customers to buy more product, and if we fail to do so, our business goals and prospects may not be achieved to the extent sought or anticipated or at all.

Future operating results and key metrics may fluctuate significantly from period-to-period due to a wide range of factors, which makes our future results difficult to predict.

Our operating results and key metrics could vary significantly from quarter-to-quarter as a result of various factors, some of which are outside of our control, including:

Any one of these or other factors discussed elsewhere in this Prospectus may result in fluctuations in our operating results, meaning that quarter-to-quarter comparisons may not necessarily be indicative of our future performance.

Any failures of or damage to, attack on or unauthorized access to our information technology systems or facilities or disruptions to our continuous operations, including the systems, facilities or operations of third parties with which we do business, such as resulting from cyber-attacks, could result in significant costs, reputational damage and limits on our ability to conduct our business activities.

Our operations will depend on information technology infrastructure and computer systems, both internal and external, to, among other things, record and process customer and supplier data, marketing activities and other data and functions and to maintain that data and information securely. In recent years, several organizations have suffered successful cyber-attacks launched both domestically and from abroad, resulting in the disruption of services to customers, loss or misappropriation of sensitive or private data and reputational harm. If we are subject to a cyber-attack, we could suffer a similar breach or suspension in the future. Further, we may be unaware of a prior attack and the damage caused thereby until a future time when remedial actions cannot be taken. Cyber-threats are often sophisticated and are continually evolving. We may not implement effective systems and other measures to effectively identify, detect, prevent, mitigate, recover from or remediate the full diversity of cyber-threats or improve and adapt such systems and measures as such threats evolve and advance in their ability to avoid detection.

A cyber-security incident, or a failure to protect our technology infrastructure, systems and information and our customers, suppliers and others’ information against cyber-security threats, could result in the theft, loss, unauthorized access to, disclosure, misuse or alteration of information, system failures or outages or loss of access to information. The expectations of our customers and regulators with respect to the resiliency of our systems and the adequacy of our control environment with respect to such systems may increase as the risk of cyber-attacks, and the consequences of those attacks become more pronounced. We may not be successful in meeting those expectations or in our efforts to identify, detect, prevent, mitigate and respond to such cyber-incidents or for our systems to recover in a manner that does not disrupt our ability to provide products and services to our customers or product personal, private or sensitive information about our business, customers or other third parties.

In July 2023, the Securities and Exchange Commission (the “SEC”) approved final rules requiring public companies to report material cybersecurity incidents and disclose their cybersecurity risk management, strategy and governance. The new rules will require us to enhance our cybersecurity compliance efforts and have the effect of causing us to expend funds to prevent material cybersecurity incidents and begin making cybersecurity-related periodic and annual disclosures.

Specifically, the new rules impose a new Form 8-K disclosure requirement about material cybersecurity incidents within four business days after we determine that a cybersecurity is material. Annually we will be required to disclose in our 10-K our processes, if any, to assess, identify and manage material risks from cybersecurity threats including whether we have hired third parties in connection with the processes. We also will be required to disclose whether any risks from cybersecurity threats have or are materially reasonably likely to materially affect us. Finally we must describe our Board’s oversight of risks from cybersecurity threats and management’s role in assessing and managing these risks. We expect to incur material additional compliance and reporting costs, including monitoring, collecting, and analyzing data concerning cyber-security incidents and evaluating and preparing the required disclosure. We may also be required to incur third party compliance costs.

The failure to maintain an adequate technology infrastructure and applications with effective cyber-security controls could impact operations, adversely affect our financial results, result in loss of business, damage our reputation or impact our ability to comply with regulatory obligations, leading to regulatory fines and sanctions. We may be required to expend significant additional resources to modify, investigate or remediate vulnerabilities or other exposures arising from cyber-security threats. Failing to prevent or properly respond to a cyber-attack could expose us to regulatory fees or civil liability, cause us to lose customers or suppliers, prevent us from offering our products including due to resulting regulatory action, impair our ability to maintain continuous operations, and inhibit our ability to meet regulatory requirements.

Our failure to effectively manage our growth could harm our business.

Businesses, including development stage companies such as ours which often grow rapidly, may have difficulty managing their growth. These challenges are exacerbated in circumstances such as ours following a recent acquisition of operating businesses. We intend to expand the number and types of products we sell as we grow, if and as capital becomes available. Further, because of our reliance on consumer spending which depends on novelty and social trends, and the rapid and constant technologically advancements that characterize our industry, we are subject to periodic sales cycles, and we will therefore need to replace and regularly introduce on a timely basis new products and technologies, enhance existing products, and effectively stimulate customer demand for new products and upgraded or enhanced versions of our existing products. Similarly, because our product offerings are largely dependent on others’ drone-related products and activities, we may need to adjust or update as third parties advance or alter their technology and activities. If we are able to successfully develop, produce and market our products, we will likely need to incur additional expenditures and expand our personnel with additional employees and consultants who are capable of providing the necessary support. We cannot assure you that our management will be able to manage our growth effectively or successfully.

The replacement and expansion of our products is expected to place a significant strain on our management, operations and engineering resources. Specifically, the areas that are strained most by these activities include the following:

The drone industry relies on limited sources to supply certain components and materials used in the manufacturing of drones. Our intention is to purchase certain components from suppliers based in the United States, which may lead us to pay higher prices, or select parts from a more limited number of suppliers relative to our competitors, which would adversely impact our gross margin and operating results. Our operating results could be materially adversely impacted if our suppliers do not provide the critical components used to assemble our products on a timely basis, at a reasonable price, and in sufficient quantities.

Our ability to meet customer demand depends, in part, on our ability to obtain timely and adequate delivery of components for our products. All of the components that go into the manufacturing are sourced from third-party suppliers.

Some of the key components used to manufacture our products come from a limited or single source of supply, or by a supplier that could potentially become a competitor. Our contract manufacturers generally purchase these components on our behalf from approved suppliers. We are subject to the risk of shortages and long lead times in the supply of these components and the risk that our suppliers discontinue or modify components used in our products. In addition, the lead times associated with certain components are lengthy and preclude rapid changes in quantities and delivery schedules.

If we lose access to components from a particular supplier or experience a significant disruption in the supply of products and components from a current supplier, we may be unable to locate alternative suppliers of comparable quality at an acceptable price, or at all, and our business could be materially and adversely affected. In addition, if we experience a significant increase in demand for our products, our suppliers might not have the capacity or elect not to meet our needs as they allocate components to other customers. Developing suitable alternate sources of supply for these components may be time-consuming, difficult and costly, and we may not be able to source these components on terms that are acceptable to us, or at all, which may adversely affect our ability to meet our development requirements or to fill our orders in a timely or cost-effective manner. Identifying a suitable supplier is an involved process that requires us to become satisfied with the supplier’s quality control, responsiveness and service, financial stability, labor and other ethical practices, and if we seek to source materials from new suppliers, there can be no assurance that we could do so in a manner that does not disrupt the manufacture and sale of our products.

Our reliance on single source, or a small number of suppliers involves a number of additional risks, including risks related to supplier capacity constraints, price increases, timely delivery, component quality, failure of a key supplier to remain in business and adjust to market conditions, delays in, or the inability to execute on, a supplier roadmap for components and technologies; and natural disasters, fire, acts of terrorism or other catastrophic events, including global pandemics.

Certain components and services necessary for the manufacture of our products are available from only a limited number of sources, and other components and services are only available from a single source. Our relationship generally is on a purchase order basis and these firms do not have a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis. These suppliers could discontinue sourcing merchandise for us at any time. If any of these suppliers were to discontinue its relationship with us, or discontinue providing specific products to us, and we are unable to contract with a new supplier that can meet our requirements, or if they or such other supplier were to suffer a disruption in their production, we could experience disruption of our inventory flow, a decrease in sales and the possible need to re-design our products. Any such event could disrupt our operations and have an adverse effect on our business, financial condition and results of operations. Several new and alternative suppliers have begun offering components suitable for use in our products. With new tooling and electronics, any one of these alternative components could be incorporated into our products but our costs could be higher, they may offer less performance, and, as a result, make our products too costly and less desirable.

If we are unable to attract, integrate and retain additional qualified personnel, including top technical talent, our business could be adversely affected.

Our future success depends in part on our ability to identify, attract, integrate and retain highly skilled technical, managerial, sales and other personnel, particularly as we attempt to expand our operations and further develop and market our products. We face intense competition for a limited number of qualified individuals with the requisite skills and experience from numerous other companies, including other software and technology companies, many of whom have greater financial and other resources than we do. These companies also may provide more diverse opportunities and better chances for career advancement. Some of these characteristics may be more appealing to high-quality candidates than those we have to offer. In addition, new hires often require significant training and, in many cases, take significant time before they achieve full productivity. We may incur significant costs to attract and retain qualified personnel, including significant expenditures related to salaries and benefits and compensation expenses related to equity awards, and we may lose new employees to competitors or other companies before we realize the benefit of our investment in recruiting and training them. Moreover, new employees may not be or become as productive as we expect, as we may face challenges in adequately or appropriately integrating them into our workforce and culture. In addition, as we move into new geographies, we will need to attract and recruit skilled personnel in those areas. We have limited experience with recruiting in geographic areas outside of the United States, and may face additional challenges in attracting, integrating and retaining international employees. If we are unable to attract, integrate and retain suitably qualified individuals who are capable of meeting our growing technical, operational and managerial requirements, on a timely basis or at all, our business will be adversely affected.

Risks Related to Our Sale of Drone-Related Products and Operations in the Drone Industry.

We operate in an emerging and rapidly evolving industry which makes it difficult to evaluate our business and future prospects.

The drone industry is relatively new and is growing rapidly. As a result, it is difficult to evaluate our business and future prospects. We cannot accurately predict whether, and even when, demand for our products will increase, if at all. The risks, uncertainties and challenges encountered by companies operating in emerging and rapidly growing industries include:

As such, our current expectations and projects about future events and trends may be different from the actual results. Furthermore, if we are unable to address any of the above challenges successfully, our business, financial condition, results of operations, and prospects may be adversely affected by such failure.

We face competition from larger companies that have substantially greater resources which challenges our ability to establish market share, grow the business, and reach profitability.

The drone industry is attracting a wide range of significantly larger companies which have substantially greater financial, management, research and marketing resources than we have. The drone hardware and parts and components spaces are dominated by larger Chinese companies such as SZ DJI Technology Company, Ltd and T-Motor. With respect to our FPV products, current and potential future competitors also include a variety of established, well-known diversified consumer electronics manufacturers such as Samsung, Sony, LG Electronics (LGE), HTC, Lenovo, Epson, Yuneec, Boscam, Eachine, Walkera, SkyZone, MicroLED and large software and other products companies such as Alphabet Inc. (Google), Microsoft, Facebook and Snap. The large number of smaller and/or private companies focused on drone solutions also have competitive advantages over us which we may struggle to overcome, particularly as we seek to further establish and grow our customer base. Our competitors may be able to provide customers with different or greater capabilities than we can provide, including technical qualifications, pricing, and key technical support. Many of our competitors may utilize their greater resources to develop competing products and technologies, leverage their financial strength to utilize economies of scale and offer lower pricing, and hire more qualified personnel by offering more generous compensation packages. On the other hand, other small business competitors may be able to offer more cost competitive solutions or may be able to adapt more quickly to market developments due to lower overhead costs, leveraging of their professional relationships and networks, geographic or specialty focuses or greater flexibility inherent in smaller operations and a lower number of personnel.

Among product and service features that drive competition in our industry are breadth of product line, quality and durability of products, stability, reliability and reputation of the provider, along with cost. Quantity discounts, price erosion, and rapid product obsolescence due to technological improvements are therefore common in our industry as competitors strive to retain or expand market share. The Company’s ability to compete effectively will depend on, among other things, the Company’s pricing models, quality of customer service, development of new and enhanced products and services in response to customer demands and changing technology, reach and quality of sales and distribution channels and capital resources. Competition could lead to an inability to sustain sales levels, a reduction in the rate at which the Company adds new customers, a decrease in the size of the Company’s market share and a decline in its customers and revenue. In order to secure sales, we may have to offer comparable products and services at lower pricing, which could adversely affect our operating margins. Our inability to compete effectively against these larger companies could have a material adverse effect on our business, financial condition and operating results.   

The development and manufacture of FPV goggles encompasses several complex processes and several steps of our production processes are dependent upon third party vendors, supply chains, the availability of PCBs, optics, and certain chips. Any change in availability of these components, manufacturing or design partners could result in delivery interruptions, which could adversely affect our operating results.

As we continue to develop our products, we must progress through the complex and challenging processes involved in the technology and designs on which Fat Shark and Rotor Riot products are founded. Fat Shark and Rotor Riot rely on third party suppliers for the resources needed to navigate these processes and expect to continue to rely on such parties when we reach the manufacturing and marketing stages. Our reliance on third-party manufacturers and service providers will entail risks to which we may not be subject if our future operations were more vertically integrated, including:

Given our early stages, our product technology and manufacturing processes are evolving, which can result in production challenges and difficulties. We may be unable to produce our products in sufficient quantity and quality to maintain existing customers and attract new customers. In addition, we may experience manufacturing problems which could result in delays in delivery of orders or product introductions. Any of these events could lead to production and marketing delays or failure or impact on our ability to successfully commercialize our products. If we fail to contract with third parties on favorable terms, coordinate with and supervise their services and contributions to our processes, and leverage those relationships to deliver quality products in a timely manner to customers, we could experience reductions or delays in revenue, reputational harm and diminished brand recognition, higher than expected expenses, or other adverse developments that would materially harm our business.

Several steps of our production processes are dependent upon certain critical machines and tools which could result in delivery interruptions and foregone revenues.

Fat Shark currently has no equipment redundancy to manufacture its products, meaning we will rely on a limited number of machines to perform a large quantity of steps in the manufacturing and assembly processes. Rotor Riot is limited by the number of personnel it has on staff to assemble custom drones. This may, among other things, delay delivery timelines or reduce our revenue and accounts receivable, and/or force us to rely more heavily on third parties to meet customer deadlines or volume demands, either of which will adversely affect our results of operation and ability to achieve and maintain profitability. If we experience any significant disruption in manufacturing, a serious failure of a critical piece of equipment, or an inability to hire personnel, we may be unable to supply products to our customers in a timely manner. Interruptions in our manufacturing could be caused by us or our partners including but not limited to equipment problems, the introduction of new equipment into the manufacturing process or delays in the delivery of new manufacturing equipment. Lead-time for delivery, installation, testing, repair and maintenance of manufacturing equipment can be extensive. We can provide no assurances that we will not lose potential sales or be able to meet production orders due to future production interruptions in our manufacturing lines.

We may not be able to procure necessary key components for our products or may produce or purchase too much inventory.

The drone industry, and the electronics industry as a whole, can be subject to business cycles. During periods of growth and high demand for products, we may not have adequate supplies of inventory on hand to satisfy customers’ needs. Furthermore, during these periods of growth, our suppliers may also experience high demand and, therefore, may not have adequate levels of the components and other materials that the Company requires to manufacture products so that it can meet customers’ needs. Our inability to secure sufficient components to produce products for customers, or similar challenges faced by the drone manufacturers we serve, could negatively impact our sales and operating results. We may choose to mitigate this risk by increasing the levels of inventory for certain key components assuming we have available cash resources. Increased inventory levels can increase the potential risk for excess and obsolescence should our forecasts fail to materialize or if there are negative factors impacting our customers’ end markets. Such a risk becomes especially prevalent during a recession and market downturn. If we purchase too much inventory, we may have to record additional inventory reserves or write-off the inventory, which could have a material adverse effect on our gross margins and on our results of operations.

We may not be able to keep pace with technological advances; and we depend on advances in technology by other companies.

The drone industry in general, and the market for the sale of drone hardware and component parts in particular, continues to undergo significant changes, primarily due to technological developments. Because of the rapid growth and advancement of technology, shifting consumer tastes and the popularity and availability of other forms of activities, it is impossible to predict the overall effect these factors could have on potential revenue from, and profitability of the drone industry. The development of both drone-related software and hardware is a costly, complex and time-consuming process, and investments in product development often involve a long wait until a return, if any, can be achieved on such investment. We might face difficulties or delays in the development process that will result in our inability to timely offer products that satisfy the market, which might allow competing products to emerge during the development and certification process. We anticipate making significant investments in research and development relating to our products and technology, but such investments are inherently speculative and require substantial capital expenditures. Any unforeseen technical obstacles and challenges that we encounter in the research and development process could result in delays in or the abandonment of product commercialization, may substantially increase development costs, and may negatively affect our results of operations. In the time it takes to develop or improve upon a product, that product may become obsolete.

It is impossible to predict the overall effect these factors could have on our ability to compete effectively in a changing market, and if we are not able to keep pace with these technological advances, then our revenues, profitability and results from operations may be materially adversely affected. It is impossible to predict the overall effect these factors could have on our ability to compete effectively in a changing market, and if we are not able to keep pace with these technological advances, then our revenues, profitability and results of operations may be materially adversely affected. However, if we struggle to adapt to an industry-shifting technological advancement or competitor offerings that render our products relatively less attractive or obsolete, including due to competitive pressures we face relative to other drone companies, it could have a material adverse effect on our business.

Further, we rely on and will continue to rely on components of our products that are developed and produced by other companies over which we have limited control. The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies, and our ability to procure them from such third parties in a timely manner and on economically feasible terms. We may, from time-to-time, contract with and support companies developing key technologies in order to accelerate the development of such products for our specific uses. Such activities might not result in useful technologies or components for us.

Lack of long-term purchase orders and commitments from customers may lead to a rapid decline in sales.

Customers issue purchase orders or use our e-commerce site solely at their own discretion, often shortly before the requested date of shipment. Both our distributor relationships through Fat Shark and our online sales through Rotor Riot entail short-term contracts under which customers are generally able to cancel orders (without penalty) or delay the delivery of products on relatively short notice, regardless of whether or not we are in default under our agreements. The online business involves retail customers who are not likely to be repeat customers unless a need arises for updated hardware or software solutions offered by us, which may not occur on a frequent basis, resulting in lack of reliable recurring revenue in that part of our business. In addition, current customers may decide not to purchase products for any reason. If those customers do not continue to purchase products, sales volume could decline rapidly with little or no warning.

We cannot rely on long-term purchase orders or commitments to protect from the negative financial effects of a decline in demand for products. Fat Shark and Rotor Riot typically plan production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. Fat Shark resellers issue purchase orders but they have options to reschedule or pay cancellation fees. The uncertainty of product orders makes it difficult to forecast sales and allocate resources in a manner consistent with actual sales. Moreover, expense levels and the amounts invested in capital equipment and new product development costs are based in part on expectations of future sales and, if expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls. As a result of lack of long-term purchase orders and purchase commitments, and long product development lead times, we may experience a rapid decline in sales.

As a result of these and other factors, investors should not rely on revenues and operating results for any one quarter or year as an indication of future revenues or operating results. If quarterly revenues or results of operations fall below expectations of investors or public market analysts, the price of our common stock could fall substantially.

Our products require ongoing research and development and may experience technical problems or delays, which could lead the business to fail.

Our future research and development efforts will remain subject to all of the risks associated with the development of new products based on emerging and innovative technologies, including, for example, unexpected technical problems or the possible insufficiency of funds for completing development of these products. If technical problems or delays arise, further improvements in products and the introduction of future products could be adversely impacted, and we could incur significant additional expenses and the business may fail. Additionally, we may deploy significant capital or human resources towards developing or improving upon a product, only for such efforts fail to yield the results we hoped for or intended, which would materially adversely affect our financial condition. This is an acute risk given the relatively new and evolving nature of the drone industry, and constant entrance of new market participants attempting to compete with us. Similarly, if we invest in product research and development efforts and a competitor brings a similar product to market before us, or alleges an infringement of their intellectual property, our ability to market the product or compete effectively could be lost. Any such development could materially harm our business.

If we are involved in litigation, it could harm our business or otherwise distract management.

If we become a party to a substantial, complex or extended litigation, it could cause us to incur large expenditures and could distract management. For example, lawsuits by licensors, consumers, employees or stockholders or litigation with federal, state or local governments or regulatory bodies could be very costly and disrupt business. As described elsewhere in these Risk Factors, our operations and products, as well as those of our customers, collaborators and product end-users, come with the inherent possibility of lawsuits arising from product liability, property damage and personal injury, breach of contract and product warranty claims, intellectual property infringement, regulatory violations and sanctions, and data privacy issues, any of which can result in costly and time-consuming litigation which would divert our limited human and capital resources and could cause other adverse impacts on our business such as reputational harm and loss of future business. While disputes from time-to-time are not uncommon, we may not be able to resolve such disputes on terms favorable to us which could have a material adverse impact on our results of operations and financial condition.

Among other things, claims could be brought against us if use and misuse of our products causes personal injury or death. If a consumer causes damage to a person or property using our drone, we as a reseller of the drone could be sued for selling an allegedly defective product. The possibility that the foregoing events occur from events involving our products is particularly high, because we supply technology used in the operation of drones which is relatively novel and are frequently operated at high speeds and altitudes, and often in densely populated areas and/or by individuals who lack a high level of experience operating them. These characteristics increase the probability that injury or damage to personal property might occur, even absent a defect. Additionally, because Fat Shark’s products are used as ancillary or supplemental components of a drone’s functions, we may become involved in disputes arising from a third party’s actions or products that utilize its technology, even if we were not the direct cause of the issue. Any claims against us, regardless of their merit, could severely harm our financial condition, strain our management and other resources.

Product liability claims might be brought against us by customers, civilians or private entities or others using or otherwise coming into contact with our products. If we cannot successfully defend against product liability claims, we could incur substantial liability and costs. Regardless of merit or eventual outcome, product liability claims may cause:

We anticipate the risk of product liability and other claims related to our products and their uses will grow as our products begin to be used. We are unable to predict if we will be able to obtain or maintain insurance for such claims. Insurance coverage is becoming increasingly expensive. We do not have such insurance and we may not be able to obtain it at a reasonable cost or in sufficient amounts to protect us against losses due to liability. A successful product liability claim or series of claims brought against us could cause our stock price to decline and, would adversely affect our results of operations and business.

Our business is highly dependent upon our brand recognition and reputation, and the failure to maintain or enhance our brand recognition or reputation, including due to our high reliance on online and social media platforms, would likely adversely affect our business and operating results.

We believe that maintaining and enhancing Fat Shark and Rotor Riot brand identity, and our reputation are critical to our relationships with customers and strategic partners and to our ability to attract new customers and strategic partners. We also believe that the importance of our brand recognition and reputation will continue to increase as competition in our market continues to develop. Our success in this area will depend on a wide range of factors, some of which are beyond our control, including the following:

Any of the foregoing developments or an inability to navigate these or other challenges to establish and grow our brand recognition and current and future product popularity could materially adversely affect us.

In addition, particularly with respect to Rotor Riot, we are highly dependent on online social media platforms such as Facebook, Instagram and YouTube to advertise our products, market our brand and develop and maintain customer loyalty. Each of these platforms requires that users adhere to strict terms and conditions governing content, communications and other activities on their platform, which are generally heightened for commercial uses such as ours. If we or third parties such as drone pilots who Rotor Riot uses to market our products online fail to adhere to these requirements, we could be limited, restricted or banned from some or all uses, which would materially adversely affect our business.

Future growth and ability to generate and grow revenue and achieve or maintain profitability may be adversely affected if our marketing initiatives are not effective in generating sufficient levels of brand awareness.

Our future growth and profitability will depend in large part upon the effectiveness and efficiency of our marketing efforts, including our ability to:

Planned marketing expenditures are unknown and may not result in increased total sales or generate sufficient levels of product and brand name awareness. We may not be able to manage marketing expenditures on a cost-effective basis.

Future acquisitions could disrupt our business and adversely affect our operating results, financial condition and cash flows.

We may make acquisitions that could be material to our business, operating results, financial condition and cash flows. Our ability as an organization to successfully acquire and integrate technologies or businesses is unproven. Acquisitions involve many risks, including the following:

We may not succeed in addressing these or other risks or any other problems encountered in connection with the integration of any acquired business. The inability to successfully integrate the business, technologies, products, personnel or operations of any acquired business, or any significant delay in achieving integration, could have a material adverse effect on our business, operating results, financial condition and cash flows.

If we incur any future impairment in the carrying value of our goodwill asset or write-off of our general intangibles, it could depress our stock price.

On a combined pro forma basis, as of December 31, 2023, we had $14,793,080 of estimated goodwill and $1,252,888 of intangible assets on our balance sheet. Goodwill and intangible assets must be evaluated for impairment annually or more frequently if events indicate it is warranted. If the carrying value of a reporting unit asset exceeds its current fair value, the goodwill asset is considered impaired. Events and conditions that could result in impairment in the value of our goodwill and intangible assets include, but are not limited to, significant negative industry or economic trends, significant decline in the Company’s stock price for a sustained period of time, significant decline in market capitalization relative to net book value, limited funding that could delay development efforts, significant changes in the manner of use of the assets or the strategy for the Company’s overall business, or safety issues that surface during development efforts, or the end of our product life cycles that will result in impairment of good will. We may in the future be required to record impairment charges to write-off goodwill and intangible assets which is also related to our acquisition of Fat Shark and Rotor Riot. Our stock price could be negatively impacted should future impairments of our goodwill and/or intangible assets occur. A valuation will be performed related to the closing of the Business Combination based on final assets acquired and liabilities assumed and final amounts of goodwill and other intangibles will be determined. To the extent that we may be required to write-off the value of our goodwill and/or our intangibles assets, our stock price could be adversely affected.

Product quality issues and a higher-than-expected number of warranty claims or returns could harm our business and operating results.

The products that we sell could contain defects in design or manufacture. There can be no assurance we will be able to detect and remedy all defects in the hardware we sell, which could result in product recalls, product redesign efforts, loss of revenue, reputational damage and significant warranty and other remediation expenses. Similar to other mobile and consumer electronics, our products have a risk of overheating in the course of usage or upon malfunction. Any such defect could result in harm to property or in personal injury. If we determine that a product does not meet product quality standards or may contain a defect, the launch of such product could be delayed until we remedy the quality issue or defect. The costs associated with any protracted delay necessary to remedy a quality issue or defect in a new product could be substantial.

Fat Shark and Rotor Riot generally provide a one-year warranty on all of our products, except in certain European countries where it can be two years for some consumer-focused products. The occurrence of any material defects in our products could expose us to liability for damages and warranty claims in excess of our current reserves, and we could incur significant costs to correct any defects, warranty claims or other problems. In addition, if any of our product designs are defective or are alleged to be defective, we may be required to participate in a recall campaign. In part due to the terms of our warranty policy, any failure rate of our products that exceeds our expectations may result in unanticipated losses. Any negative publicity related to the perceived quality of our products could affect our brand image and decrease retailer, distributor and consumer confidence and demand, which could adversely affect our operating results and financial condition. Further, accidental damage coverage and extended warranties are regulated in the United States at the state level and are treated differently within each state. Additionally, outside of the United States, regulations for extended warranties and accidental damage vary from country-to-country. Changes in interpretation of the regulations concerning extended warranties and accidental damage coverage on a federal, state, local or international level may cause us to incur costs or have additional regulatory requirements to meet in the future in order to continue to offer our support services. Our failure to comply with past, present and future similar laws could result in reduced sales of our products, reputational damage, penalties and other sanctions, which could harm our business and financial condition.

Estimated future product warranty claims may be based on a variety of factors including the expected number of field failures over the warranty commitment period, the term of the product warranty period, and the costs for repair, replacement and other associated costs. Because of the foregoing or other contingencies, these estimates could prove to be incorrect, such that our warranty obligations are higher than anticipated. Our warranty obligations may be affected by product failure rates, claims levels, material usage and product re-integration and handling costs. Should actual product failure rates, claims levels, material usage, product re-integration and handling costs, defects, errors, bugs or other issues differ from original estimates, we could end up incurring materially higher warranty or recall expenses than we anticipate, which would materially adversely affect our business.

Risks Related to Intellectual Property Protection

If third-party intellectual property infringement claims are asserted against us, it may prevent or delay our product development and commercialization efforts and have a material adverse effect on our business and future prospects.

Companies in the consumer electronics, wireless communications, semiconductor, AI, IT, and display industries steadfastly pursue and protect intellectual property rights, often times resulting in considerable and costly litigation to determine the validity of patents and claims by third parties of infringement of patents or other intellectual property rights. Other companies may hold or obtain patents or inventions or other proprietary rights in technology necessary for our business. If we are forced to defend against infringement claims, we may face costly litigation, diversion of technical and management personnel, and product shipment delays, even if the allegations of infringement are unwarranted.

Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are pursuing product development and sales. As the consumer electronics and drone industries expand and more patents are issued, the risk increases that our current and future products may be subject to claims of infringement of the patent rights of third parties. Third parties may assert that we are employing their proprietary technology without authorization. There may be third-party patents or patent applications with claims to inventions, materials, engineering designs, or methods of manufacture related to the design, use or manufacture of our products. Because patent applications can take many years to issue, there may be patent applications currently pending that may later result in patents that our products may infringe upon. Third parties may obtain patents in the future and claim that use of our technologies or those of third parties with which our technologies are integrated infringes on these patents. If any third-party patents were to be held by a court to cover the manufacturing process of any of our products, or any of the characteristics or related components thereof, the holders of any such patents may be able to block our ability to commercialize such product unless we obtained a license under the applicable patents, or until such patents expire. Similarly, if any third-party patents were to be held by a court to cover aspects of our or our customers’ or strategic partners’ products or processes, the holders of any such patents may be able to block our ability to develop and commercialize the applicable product unless we obtained a license or until such patent expires. In either case, such a license may not be available on commercially reasonable terms or at all.

Parties making intellectual property claims against us may obtain injunctive or other equitable relief, which could block our ability to further develop and commercialize one or more of our products. Defense of these claims, regardless of their merit, involves substantial litigation expense and diversion of our management’s attention from our business.

If we are unsuccessful in defending against patent infringement claims in any jurisdiction where such a dispute arises, our products could be found to infringe on the intellectual property rights of others. If a claim of infringement against us succeeds, we may have to pay substantial damages, possibly including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign our infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure. The financial harm caused by any such development with respect to intellectual property disputes and litigation will be heightened to the extent we do not possess, acquire or maintain adequate insurance coverage for these contingencies now or in the future. Further, if there is a successful claim of infringement against us and we are unable to develop non-infringing technology or license the infringed or similar technology on a timely basis, or if we are required to cease using one or more of our business or product names due to a successful trademark infringement claim against us, it could materially adversely affect our business.

We may depend on intellectual property rights including patent rights that have not yet been and may not be obtained by us, and our intellectual property rights and proprietary rights may not adequately protect our products.

Our commercial success will depend substantially on the ability to obtain patents and other intellectual property rights and maintain adequate legal protection for products in the United States and other countries. We will be able to protect our intellectual property from unauthorized use by third parties only to the extent that these assets are covered by valid and enforceable patents, trademarks, copyrights or other intellectual property rights, or are effectively maintained as trade secrets. With the closing of our IPO in February 2024, we have 12 issued patents, including four issued in the United States, and nine pending patent Applications, including two pending in the United States which were assigned to a wholly-owned subsidiary of the Company by UAV Patent Corp. (“UAV”) a wholly-owned subsidiary of Red Cat, in each case with a non-exclusive, non-sublicensable royalty free perpetual license back to UAV for Red Cat and its present and future subsidiaries to make, use and sell products subject to such assigned patents and applications solely with respect to military and defense drone applications.

We will apply for patents covering our products, services, technologies, and designs, as we deem appropriate. We may fail to apply for patents on important products, services, technologies or designs in a timely fashion, or at all. We do not know whether, and there can be no assurance that, any of our patent applications will result in the issuance of any patents. Even if patents are issued, they may not be sufficient to protect our products, technologies, or designs. Our existing and future patents may not be sufficiently broad to prevent others from developing competing products, technologies, or designs. Intellectual property protection and patent rights outside of the United States, particularly in China, are even less predictable. As a result, the validity and enforceability of patents cannot be predicted with certainty. Moreover, we cannot be certain whether:

The patents we own or license and those that may be issued to us in the future may be challenged, invalidated, rendered unenforceable or circumvented, and the rights granted under any issued patents may not provide us with proprietary protection or competitive advantages. Moreover, third parties could practice our inventions in territories where we do not have patent protection or in territories where they could obtain a compulsory license to our technology where patented. Such third parties may then try to import products made using our inventions into the United States or other territories. We cannot ensure that any of our pending patent applications will result in issued patents, or even if issued, predict the breadth, validity and enforceability of the claims upheld in our and other companies’ patents. Further, patents have a limited lifespan. In the United States, the natural expiration of a patent is 20 years after it is filed, although various extensions may be available. The life of a patent, and the protection it affords, is limited. When the patent life has expired for a product, we will become vulnerable to competition from competitors attempting to replicate the technology that was formerly patent protected. Further, if we encounter delays such as due to regulatory approvals, the time during which we will be able to market and commercialize a product under patent protection could be reduced.

Unauthorized parties may attempt to copy or otherwise use aspects of our processes and products that we regard as proprietary. While we plan to enter into written agreements with certain of our employees and consultants with terms designed to protect our intellectual property rights, there cannot be any assurance that these provisions will provide us with the protection sought. Further, any third parties with whom we do not execute such agreements, such as certain of our suppliers, could attempt to dispute our intellectual property rights or misappropriate our technology or trade secrets. Policing unauthorized use of our proprietary information and technology is difficult and can be costly, and our efforts to do so may not prevent misappropriation of our technologies. We may become engaged in litigation to protect or enforce our patent and other intellectual property rights or in International Trade Commission proceedings to abate the importation of goods that would compete unfairly with our products and, if unsuccessful, these actions could result in the loss of patent or other intellectual property rights protection for the key technologies on which our business strategy depends.

We also rely in part on unpatented proprietary technology, and others may independently develop the same or similar technology or otherwise obtain access to our unpatented technology. We plan to require employees, contractors, consultants, financial advisors, suppliers, and strategic partners to enter into confidentiality and intellectual property assignment agreements (as appropriate), but these agreements may not provide sufficient protection for our trade secrets, know-how or other proprietary information.

The laws of certain countries do not protect intellectual property and proprietary rights to the same extent as the laws of the United States and, therefore, in certain jurisdictions including China, we may be unable to protect our products, services, technologies and designs adequately against unauthorized third-party copying, infringement or use, which could adversely affect our competitive position. To protect or enforce our intellectual property rights, we may initiate proceedings or litigation against third parties. Such proceedings or litigation may be necessary to protect our trade secrets or know-how, products, technologies, designs, brands, reputation, likeness, authorship works or other intellectual property rights. Such proceedings or litigation also may be necessary to determine the enforceability, scope and validity of the proprietary rights of others. Any proceedings or lawsuits that we initiate could be expensive, take significant time and divert management’s attention from other business concerns. Additionally, we may provoke third parties to assert claims against us, which could invalidate or narrow the scope of our own intellectual property rights. We may not prevail in any proceedings or lawsuits that we initiate and the damages or other remedies awarded, if any, may be significant. The occurrence of any of these events may adversely affect our business, financial condition and operating results.

We will register for certain of our trademarks in several jurisdictions worldwide. In some jurisdictions where we will apply to register our trademarks, other applications or registrations may exist for the same, similar, or otherwise related products or services. If we are not successful in arguing that there is no likelihood of confusion between our marks and the marks that are the subject of the other applications or registrations owned by third parties, our applications may be denied, preventing us from obtaining trademark registrations and adequate protection for our marks in the relevant jurisdictions, which could impact our ability to build our brand identity and market our products and services in those jurisdictions. Whether or not our application is denied, third parties may claim that our trademarks infringe their rights. As a result, we could be forced to pay significant settlement costs or cease the use of these trademarks and associated elements of our brand in the United States or other jurisdictions.

Even in those jurisdictions where we are able to register our trademarks, competitors may adopt or apply to register similar trademarks to ours, may register domain names that mimic ours or incorporate our trademarks, or may purchase keywords that are identical or confusingly similar to our brand names as terms in Internet search engine advertising programs, which could impede our ability to build our brand identity and lead to confusion among potential customers of our products and services. If we are not successful in proving that we have prior rights in our marks and arguing that there is a likelihood of confusion between our marks and the marks of these third parties, our inability to prevent these third parties from using our marks may negatively impact the strength, value and effectiveness of our brand names and our ability to market our products and prevent consumer confusion.

If we lose our rights under our third-party technology licenses, our operations could be adversely affected.

Our current or future products may depend in part on technology rights licensed from third parties. We could lose our exclusivity or other rights to use the technology under our licenses if we fail to comply with the terms and performance requirements of the licenses. In addition, certain licensors may terminate a license upon our breach and have the right to consent to sublicense arrangements. If we were to lose our rights under any of these licenses, or if we were unable to obtain required consents to future sublicenses, we could lose a competitive advantage in the market, and may even lose the ability to commercialize certain products or technologies completely. Either of these results could substantially decrease our revenues.

Further, to the extent we need to obtain licenses from third parties to advance our research and development efforts or commercialize or improve upon our products, we may fail to obtain these licenses at a reasonable cost or on reasonable terms, if at all. In that event, we would be unable to further develop and commercialize those products, which could harm our business significantly.

The licensing and acquisition of third-party intellectual property rights is a competitive practice, and companies that may be more established, or have greater resources than we do, may also be pursuing strategies to license or acquire third-party intellectual property rights that we may consider necessary or attractive in order to develop and commercialize our products. More established companies may have a competitive advantage over us due to their larger size and cash resources or greater hardware or software development, production and commercialization capabilities. We may not be able to successfully complete such negotiations and ultimately acquire the rights to the intellectual property surrounding product candidates that we may seek to acquire, in which case our business could be harmed.

Significant inflation could adversely affect our business and financial results.

The high rate of inflation and resulting pressures on costs and pricing of business such as ours focused on the manufacture and sale of electronics products could adversely impact our business and financial results. While inflation has created some salary pressure with our employees who wish to mitigate the impact of inflation, we have not yet suffered inflationary pressures in procurement. A rise in inflation can adversely affect us by increasing our operating costs, including by increasing the costs of materials, freight and labor, which have already been under pressure due to supply chain constraints and the effects of the COVID-19 pandemic and the shortage of chips. The Company has not identified, planned or taken any actions to mitigate inflationary pressures. Further, in the U.S. the Federal Reserve has responded by increasing interest rates to combat inflation, however such increases may result in a reduced demand for our products and/or an economic downturn. In a highly inflationary environment, or any recession or economic downturn that may result, we may be unable to adjust our business is a manner that adequately addresses these challenges, and these developments could materially adversely affect our business, results of operations and financial condition.

Risks Related to Government Regulation of Our Operations and Industry

Failure to obtain necessary regulatory approvals from the FAA or other governmental agencies by us, our customers, or others who use our products, or limitations put on the use of unmanned aircraft systems, or “UAS,” in response to public privacy or safety concerns, may prevent us from expanding the sales of our drone solutions in the United States.

The regulation of UAS and drone solutions and component parts such as those we offer is subject to substantial change, with regulators including potential alterations, enhancements and additions to existing laws and regulations, and the ultimate treatment is uncertain. A substantial majority of our products are subject to drone-related regulations enforced by the FAA, either directly or due to their inclusion in UAS offered by third parties. Further, even if some of our operations or products are not directly subject to such regulations, Fat Shark’s customers’ operations of UAS that includes our products and technology are subject to those regulations, and their failure to comply will adversely affect our ability to sell to them in the future. Further, adverse regulatory actions such as enforcement proceedings affecting customers and other third parties with which we do business can also adversely affect us, even if the violation or harm alleged did not arise from our conduct or products. Generally, under current FAA regulations the failure to register a UAS, including model aircraft, in accordance with these rules may result in regulatory and criminal sanctions. The FAA may assess civil penalties up to $33,333. Criminal penalties include fines of up to $250,000 and/or imprisonment for up to three years. However, the FAA and other government bodies and agencies are considering changes to address the drone industry, which is relatively new and rapidly evolving. In addition, there exists public concern regarding the privacy and safety implications of the use of UAS. This concern has included calls to develop explicit written policies and procedures establishing usage limitations. We cannot assure you that the response from regulatory agencies, customers and privacy advocates to these concerns will not delay or restrict the adoption of UAS and related products and technologies in certain markets. These developments, and any additional regulatory or other burdens imposed on our business and industry due to public health and safety or other concerns presently faced by the drone industry, could harm us and our customers and suppliers by increasing compliance costs and restricting our operations and product offerings and uses, which could materially adversely affect us.

Rising threats of international tariffs, including tariffs applied to goods between the U.S. and China, may materially and adversely affect our business.

We are heavily dependent on Chinese imports for our products and operations. For example, a substantial majority of Rotor Riot’s products are manufactured, directly and indirectly, using Chinese vendors. Fat Shark’s primary contract manufacturer is Shenzhen Fat Shark Technology Ltd. (“Supplier”), which is located in Shenzhen, China and provides product manufacturing services, including raw material procurement. The majority owner of this entity is the wife of Fat Shark’s founder. We do not have any written agreements with the Supplier and rely only on purchase orders. In addition, Fat Shark’s principal contract manufacturer is located in China. We do not have any written agreements with our other suppliers in China. We rely only on purchase orders. There are inherent risks and uncertainties regarding the enforcement of our rights with respect to our oral agreements and purchase orders. Should our suppliers in China fail to honor our oral agreements and purchase orders we will not have any recourse against such suppliers under Chinese law. The legal system in China and the enforcement of laws, rules and regulations in China can change quickly and the Chinese government may intervene or influence the operations of our suppliers which would adversely impact our business insofar as we would have to seek other suppliers outside of China and such suppliers would most likely charge us more for our products. Rising threats of international tariffs, including tariffs applied to goods traded between the U.S. and China, could materially and adversely affect our business and results of operations. Since the beginning of 2018, there has been increasing rhetoric, in some cases coupled with legislative or executive action, from several U.S. and foreign leaders regarding the possibility of instituting tariffs on the foreign imports of certain materials and products. During this trend, the U.S. and China imposed tariffs or announced proposed tariffs to be applied in the future to certain of each other’s exports. Beginning in 2019, the Trump administration imposed tariffs on imports of electronics products, including drones and component parts, of up to 25%. These tariffs apply to the vast majority of Rotor Riot’s and Fat Shark’s respective inventory, and Rotor Riot has in the past been, and either or both entities may in the future be, forced to implement price increases to adjust to the higher costs of production and sale, which imposes the risk of reduced demand for such products and lower sales and resulting revenue. Further, we do not know if the Biden administration or any subsequent administration will implement any, or alter current tariffs, in a manner adverse to us. These tariffs or any further costs or restrictions imposed on products that we import, could require us to raise our prices, which may result in the loss of customers and harm our business, particularly since we rely on consumer spending and our products are typically considered non-essential, and purchases are therefore highly price sensitive.

In addition, changes in political conditions in China and changes in the state of China-U.S. relations, including any tensions relating to potential military conflict between China and Taiwan, are difficult to predict and could adversely affect the operations or financial condition of the Company. In addition, because of our involvement in the Chinese market, any deterioration in political or trade relations might cause a public perception in the U.S. or elsewhere that might cause our business to become less attractive. Such an impact could adversely affect our revenues and cash flows.

We are or may become subject to governmental export and import controls, economic sanctions and other laws and regulations that could subject us to liability and impair our ability to compete in international markets.

While we understand Fat Shark and/or Rotor Riot have had minimal sales outside of the U.S., we expect to seek to market our products outside of the U.S. The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of some technologies. Our products are subject to U.S. export controls, including the Commerce Department’s Export Administration Regulations and various economic and trade sanctions regulations established by the Treasury Department’s Office of Foreign Assets Controls, and exports of our products must be made in compliance with these laws. Furthermore, U.S. export control laws and economic sanctions prohibit the provision of products and services to countries, governments, and persons targeted by U.S. sanctions. Even though we take precautions to prevent our products from being provided to targets of U.S. sanctions, our products, including our firmware updates, could be provided to those targets or provided by our customers despite such precautions.

Further, the manufacture and sale of our products in certain states and countries may subject us to environmental and other regulations. For example, many of Fat Shark and Rotor Riot’s products rely on electricity generated by lithium-ion batteries, which implicate a variety of environmental and other regulations designed to control the production, use, and transportation of hazardous materials such as lithium and other components and minerals deployed in these batteries. In addition, the increasing global focus on climate change, including greenhouse gas (“GHG”) emissions, has resulted in legislative and regulatory efforts to address the causes and impacts of climate change, and any new and more strict laws and regulations to reduce GHG emissions and address other aspects of climate change, including carbon taxes, cap and trade programs, GHG reduction requirements, requirements for the use of green energy, and changes in procurement requirements, may result in increased operational and compliance obligations, which could adversely affect our financial condition and results of operations.

Our failure to obtain required import or export approval or to comply with other applicable domestic or international laws and regulations for our products or operations could harm our international and domestic sales and adversely affect our revenue, or could subject us to costly proceedings, penalties or damages and negative publicity.

If the courts uphold the SEC’s climate change rules, we will incur additional costs which may materially and adversely affect our operating results and financial condition.

In March 2024, the SEC enacted comprehensive Climate Change Rules. Third parties immediately filed a lawsuit challenging the legality of these Rules and a federal Court of Appeals has issued a stay which means the SEC cannot presently enforce these Rules. If ultimately the Courts uphold these Rules, compliance will require us to spend material sums to be able to comply once they become applicable to us. Because of our small size, the additional costs may have a material adverse effect upon our future operating results and financial condition.

If we fail to comply with U.S. and foreign laws related to privacy, data security, and data protection, it could adversely affect our operating results and financial condition.

We, either directly or through our customers, collaborators or end-users of our products, are or may become subject to a variety of laws and regulations regarding privacy, data protection, and data security. This includes the European Union’s (“EU”) General Data Protection Regulation (the “EU GDPR”) and the United Kingdom’s General Data Protection Regulations (the “UK GDPR”) as a result of our sales in the EU. These laws and regulations are continuously evolving and developing. The scope and interpretation of the laws that are or may be applicable to us are often uncertain and may be conflicting, particularly with respect to foreign laws. The application of these laws and regulations can arise from our e-commerce platform, social media activities, drone technology and applications, relationships with third parties and their operations, or from other activities we undertake now or that we may undertake in the future. Data privacy and protection regulations are frequently broad in terms of scope of the information protected, activities affected, and geographic reach.

In particular, there are numerous U.S. federal, state, and local laws and regulations and foreign laws and regulations regarding privacy and the collection, sharing, use, processing, disclosure, and protection of personal data. Such laws and regulations often vary in scope, may be subject to differing interpretations, and may be inconsistent among different jurisdictions. For example, the GDPR includes operational requirements for companies that receive or process personal data of residents of the EU that are broader and more stringent than those previously in place in the EU and in most other jurisdictions around the world. The GDPR includes significant penalties for non-compliance, including fines of up to €20 million or 4% of total worldwide revenue. Additionally, in June 2018, California enacted the California Consumer Privacy Act (the “CCPA”). In November 2020, the CCPA was amended by Proposition 24, the California Consumer Privacy Act, which extends the CCPA. The CCPA requires covered companies to provide California consumers with new disclosures and will expand the rights afforded consumers regarding their data. Fines for noncompliance may be up to $7,500 per violation. The costs of compliance with, and other burdens imposed by, the GDPR, CCPA, and similar laws may limit the use and adoption of our products and services and/or require us to incur substantial compliance costs, which could have an adverse impact on our business.

Since the CCPA was enacted, the U.S. currently has at least 15 states – California, Colorado, Connecticut, Delaware, Florida, Indiana, Iowa, Montana, New Hampshire, New Jersey, Oregon, Tennessee, Texas, Utah and Virginia, that have comprehensive data privacy laws in place, or enacted comprehensive data privacy laws set to soon take effect. An additional seven states have enacted narrower privacy laws – Maine, Michigan, Minnesota, Nevada, New York, Vermont, and Washington. So far during the 2023-24 legislative cycle, at least 15 states have introduced privacy bills that address a range of issues, including protecting biometric identifiers and health data, or governing the activities of specific entities. However, this patchwork approach to privacy legislation could pose compliance and liability risks for companies that have multistate operations. Proposed bills in various states have similar rights in preexisting privacy legislation but differ in implementation and enforcement. Additionally, in June 2022 the American Data Privacy and Protection Act was introduced in the U.S. House of Representatives but has not yet been adopted. As introduced this proposed legislation would establish requirements for how companies handle personal data by, among other things, limiting the collection, processing, and transfer of personal data to that which is reasonably necessary to provide a requested product or service, prohibiting companies from transferring individuals’ personal data without their affirmative express consent, establishing a right to access, correct, and delete personal data, requiring companies to provide individuals with a means to “opt out” of advertising, requiring companies to implement security practices aimed at protecting personal data, and imposing enforcement actions and the possibility of civil proceedings for violations. Proposed federal legislation, like the American Data Privacy and Protection Act, will likely continue to be debated and, at some point, may be enacted in some form.

We intend to strive to comply with all applicable laws, policies, legal obligations, and industry codes of conduct relating to privacy, data security, and data protection. Our limited resources may adversely affect our compliance effort. Given that the scope, interpretation, and application of these laws and regulations are often uncertain and may be in conflict across jurisdictions, it is possible that these obligations may be interpreted and applied in a manner that is inconsistent from one jurisdiction to another and may conflict with other rules or our practices. Any failure or perceived failure by us, customers, or third-party vendors or end-users involved with our products to comply with our privacy or security policies or privacy-related legal obligations, or any compromise of security that results in the unauthorized release or transfer of personal data, may result in governmental enforcement actions, litigation, or negative publicity, and could have an adverse effect on our operating results and financial condition.

Governments are continuing to focus on privacy and data security, and it is possible that new privacy or data security laws will be passed or existing laws will be amended in a way that is material to our business. Any significant change to applicable laws, regulations, or industry practices regarding the personal data of our employees, agents or customers could require us to modify our practices and may limit our ability to expand or sustain our salesforce or bring our products to market. Changes to applicable laws and regulations in this area could subject us to additional regulation and oversight, any of which could significantly increase our operating costs and materially affect our operating results and financial condition.

Risks Related To Our Common Stock

Because Red Cat and our Principal Stockholder own 45.54% and 3.52% of our outstanding common stock, the voting power of other stockholders is limited and Red Cat will likely be able to control our business, elect our Board and otherwise control the Company which control may place their interests ahead of our stockholders’ interests.

With the consummation of the IPO in February 2024 and partial conversions of Series B to common stock, Red Cat owns 45.54% of our outstanding common stock and Mr. Jeffrey Thompson, the Chief Executive Officer of Red Cat, owns 3.52% of our common stock. Mr. Thompson does not have any power to vote the Red Cat shares of our common stock. Red Cat has delegated the voting power to a special committee of its Board of Directors (“Red Cat Board”) on which Mr. Thompson is not a member, although the voting power could be changed in the future. Because of Red Cat’s ownership it is clear even without Mr. Thompson voting with them that they can control the Company for the foreseeable future. Red Cat has the ability to have a substantial influence on matters submitted to our stockholders for approval, including the election and removal of directors and the approval of any merger, consolidation or sale of all or substantially all of our assets. As a result, our other stockholders including our management and Board may have little or no influence over matters submitted for stockholder approval. In addition, the ownership of such stockholders could preclude any unsolicited acquisition of us, and consequently, adversely affect the price of our common stock. Red Cat may make decisions that favor Red Cat and are adverse to your interests. Further, it is possible that if we filed an indemnification claim, Red Cat and Mr. Thompson acting together could simply remove our Board and dismiss the indemnification claim or lawsuit.

Because the Purchase Price for Fat Shark and Rotor Riot exceeds an independent valuation that Red Cat received for the enterprise value of the target companies, you may lose all or part of your investment.

In connection with the acquisition, we paid Red Cat the Purchase Price of $20.0 million to acquire Fat Shark and Rotor Riot comprised of (i) $1.0 million in cash, (ii) the $2.0 million Note issued by the Company to Red Cat, and (iii) $17.0 million of the Company’s common stock. In November 2020, Red Cat acquired Fat Shark for a purchase price of $8.4 million and in January 2020, Red Cat acquired Rotor Riot for a total purchase price of $2.0 million. In connection with the transaction, Red Cat received a valuation from a valuation expert engaged by Red Cat that estimated that Fat Shark and Rotor Riot had a combined enterprise value range of $5.1 million to $5.7 million, as of November 30, 2022. While the Purchase Price was negotiated in good faith between our Chief Executive Officer at that time and an independent special committee of the Red Cat Board, the Company does not intend to obtain an independent valuation on the assets and liabilities assumed. We anticipate to perform a valuation during the second quarter of 2024 based on final assets acquired and liabilities assumed and final amounts of goodwill and other intangibles. See also the “Risk Factors – If we incur any future impairment in the carrying value of our goodwill asset or write-off our general intangibles, it could depress our stock price.” Accordingly, if the Company’s management is unsuccessful in implementing its growth strategy to grow its business to justify what it is paying for the Purchase Price, it is possible that an investor may lose all or part of its investment.

The market price of our shares of common stock is subject to fluctuation.

The market price of shares of our common stock may fluctuate and has fluctuated significantly in response to factors, some of which are beyond our control, including:

Recently, the stock market, in general, has experienced extreme price and volume fluctuations due to, among other factors, concerns involving inflation, the Federal Reserve interest rate increases, supply chain shortages, recession fears, and geopolitical turmoil including the war in Ukraine and Israel. The current prolonged delay in providing new aid to Ukraine and Israel are evidence of the political uncertainties. Continued market fluctuations could result in extreme market volatility in the price of our common stock which could cause a decline in the value of our common stock below its recent price.

Our stock price may be volatile, which could result in substantial losses to investors.

In addition to changes to market prices based on our results of operations and the factors discussed elsewhere in this “Risk Factors” section, the market price of and trading volume for our common stock (including any stock-run ups or price declines) may change for a variety of other reasons, not necessarily related to our actual operating performance. The capital markets have experienced extreme volatility particularly with small public companies with relatively smaller public floats that has often been unrelated to the operating performance of particular companies. These broad market fluctuations may adversely affect the trading price of our common stock. In addition, the average daily trading volume of the securities of small companies can be very low, which may contribute to future volatility.

Factors that could cause the market price of our common stock to fluctuate significantly include:

Any of these factors, as well as broader market and industry factors, may result in large and sudden changes in the trading volume of our common stock (including stock run ups or price declines) and could seriously harm the market price of our common stock, regardless of our operating performance. This may prevent you from being able to sell your shares at or above the price you paid for your shares, if at all. In addition, following periods of volatility in the market price of a company’s shares, shareholders often institute securities class action litigation against that company. Our involvement in any class action suit or other legal proceeding could divert our senior management’s attention and could adversely affect our business, financial condition, results of operations and prospects.

An active trading market for our common stock may not develop.

Prior to the IPO, there was no public market for our common stock. The IPO price for our common stock was determined through negotiations with the underwriters. An active trading market for our shares may never develop or be sustained following this IPO. If an active market for our common stock does not develop, it may be difficult to sell our common stock without depressing the market price for the common stock, or at all.

Because our sole remedy under the Purchase Agreement in the event of any breaches of representations and warranties is to cancel some or all of the 100,000 shares of our common stock, the value of such shares may be an insufficient remedy.

The Purchase Agreement contains representations and warranties made by Red Cat and Mr. Jeffrey Thompson, Red Cat’s Chief Executive Officer. Based upon negotiations with Red Cat and its counsel, we agreed that Mr. Thompson, one of our founders, our largest stockholder and a member of our Board, will backstop Red Cat’s indemnification obligations under the Purchase Agreement in the event we claim Red Cat and/or Mr. Thompson have breached any of their respective representations and warranties contained in the Purchase Agreement, as amended, with 125,000 shares of our common stock (after giving effect to the 1-for-2 reverse stock split). Such shares will not be placed into escrow. Red Cat has no liability for such breaches by it. That means if the value of such shares held by Mr. Thompson is not at least equal to our damages, we will not have a remedy sufficient to permit us to recoup all of our damages. The only exception is fraud. Although we negotiated this limited remedy in good faith, it is possible that the shares held by Mr. Thompson may not be sufficient in which case such breach may adversely and materially affect our common stock price.

We will incur significant additional costs as a result of being a public company, and our management will be required to devote substantial time to compliance with our public company responsibilities and corporate governance practices.

With the completion of our IPO, we expect to incur increased costs associated with corporate governance requirements that will become applicable to us as a public company, including rules and regulations of the SEC under the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Customer Protection Act of 2010, and the Security Exchange Act of 1934 (the “Exchange Act”), as well as the rules of NYSE American. These rules and regulations are expected to significantly increase our accounting, legal and financial compliance costs and make some activities more time consuming, including due to increased training of our current employees, additional hiring of new employees, and increased assistance from consultants. The SEC’s new cybersecurity rules and if upheld the new climate change rules will increase our compliance costs. We also expect these rules and regulations to make it more expensive for us to maintain directors’ and officers’ liability insurance. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our Board or as executive officers. Furthermore, these rules and regulations will increase our legal and financial compliance costs and will make some activities more time-consuming and costly. We cannot predict or estimate the amount of additional costs we will incur as a public company or the timing of such costs. In addition, our management team will need to devote substantial attention to interacting with the investment community and complying with the increasingly complex laws pertaining to public companies, which may divert attention away from the day-to-day management of our business, including operational, research and development and sales and marketing activities. Increases in costs incurred or diversion of management’s attention as a result of becoming a publicly traded company may adversely affect our business, prospects, financial condition, results of operations, and cash flows.

Our failure to maintain effective disclosure controls and internal controls over financial reporting could have an adverse impact on us.

We are required to establish and maintain appropriate disclosure controls and internal controls over financial reporting. Failure to establish those controls, or any failure of those controls once established, could adversely impact our public disclosures regarding our business, financial condition or results of operations. In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed or other matters that may raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting, disclosure of management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock. In our Form 10-K for the year ended December 31, 2023, we reported that we did not maintain effective disclosure controls or internal controls over financial reporting. Investors may not purchase or hold our common stock as a result of these failures, which may result in lower prices.

Our Auditor and Red Cat’s auditor recently was subjected to certain significant enforcement actions in Canada. If its ability to perform audits for public companies in the United States is restricted it could have material adverse consequences on the Company and our investors.

In December 2023, the Canadian Public Accountability Board imposed significant restrictions on our auditors (the “Firm”) who also audited the financial statements of Fat Shark and Rotor Riot which are contained in this Prospectus. The sanctions were imposed as a result of a finding of 19 significant inspection findings relating to Canadian auditing rules occurring with two public companies whose audits the regulator reviewed. As a result, the regulator imposed certain sanctions which included: (a) prohibiting the Firm from accepting Canadian reporting issuer clients including those resulting from initial public offerings, reverse takeovers or other transactions (including an existing private company audit client seeking to become a reporting issuer through initial public offering, reverse takeover or other transaction which is considered a new reporting issuer) and (b) prohibiting the Firm from assigning one of its partners to audits of financial statements of reporting issuers in any Canadian jurisdiction in which such partner is not properly licensed to provide public accounting services by the relevant provincial Chartered Professional Accountant regulatory body.

The Firm is also subject to oversight by the Public Accounting Oversight Board (the “PCAOB”) in the United States. The PCAOB was established by Congress to oversee the audits of public companies in order to protect investors and further the public interest in the preparation of informative, accurate, and independent audit reports. The PCAOB oversees auditors' compliance with the Sarbanes-Oxley Act, provisions of the securities laws relating to auditing, professional standards, and PCAOB and SEC accounting rules. In May 2022 the PCAOB previously barred a former director and nonequity partner of the Firm for violations of PCAOB rules and standards as part of four audits across three public companies.

In the event that the PCAOB or the SEC were to impose material enforcement actions against the Firm including barring it from issuing audit opinions for companies that file reports or registration statements with the SEC, the Company and our investors could be materially and adversely affected. For example, if was determined that our previous and current financial statements (or the financial statements of Fat Shark and Rotor Riot) that were audited or reviewed by the Firm can no longer be relied upon due to auditing errors, we would be required to restate such financial statements. To the extent that the Firm was banned from representing public companies, we would be required to retain new auditors and have such financial statements re-audited, which could result in material additional auditing costs and could adversely affect our stock price and investor confidence in our company. In addition, if the Firm was to be forced to cease its operations, there can be no assurance that the SEC would grant a waiver to issuers like the Company who are unable to use prior audit reports in annual reports on Form 10-K or amendments to the Registration Statement. Furthermore, in the event that PCAOB or SEC sanctions were to result in the Firm ceasing to audit public companies that file reports with the SEC, our shareholders may not be able to recover damages against the Firm on claims in connection with a material misstatement or omission in our financial statements that were audited or reviewed by the Firm. 

Because our common stock is listed on NYSE American, we are subject to additional regulations and continued requirements.

With the completion of our IPO in February 2024, we are required to meet the continued listing standards for NYSE American. If we fail to meet NYSE American’s listing standards, our common stock may be delisted. NYSE American requires that the average closing price of its listed common stock remain above $1.00 over a 30 consecutive day period, in order to remain listed. In addition, to maintain a listing on NYSE American, we must satisfy minimum financial and other continued listing requirements and standards, including those regarding director independence and independent committee requirements, minimum stockholders’ equity, and certain corporate governance requirements. If we are unable to satisfy these requirements standards, our common stock could be subject to delisting. Delisting would have a negative effect on the price of our common stock and would impair your ability to sell our common stock when you wish to do so.

Our Board may authorize and issue shares of new classes of stock that could be superior to or adversely affect current holders of our common stock.

Our Board has the power to authorize and issue shares of classes of stock, including preferred stock that have voting powers, designations, preferences, limitations and special rights, including preferred distribution rights, conversion rights, redemption rights and liquidation rights without further shareholder approval which could adversely affect the rights of the holders of our common stock. In addition, our Board could authorize the issuance of a series of preferred stock that has greater voting power than our common stock or that is convertible into our common stock, which could decrease the relative voting power of our common stock or result in dilution to our existing common stockholders.

Any of these actions could significantly adversely affect the investment made by holders of our common stock. Holders of common stock could potentially not receive dividends that they might otherwise have received. In addition, holders of our common stock could receive less proceeds in connection with any future sale of the Company, in liquidation or on any other basis.

If we raise capital in the future, it may dilute our existing stockholders’ ownership and/or have other adverse effects on us, our securities or our operations.

If we are required to raise additional capital by issuing equity securities, our existing stockholders’ percentage ownership may decrease, and these stockholders may experience substantial dilution. Additionally, the issuance of additional shares of common stock or other securities could result in a decline in our stock price. Further, if we are required to raise additional funds by issuing debt instruments, these debt instruments could impose significant restrictions on our operations, including liens on our assets and negative covenants prohibiting us from engaging in certain transactions or corporate actions that may have the effect of limiting our ability to pursue our business strategy and growth objectives.

Common stock eligible for future sale may adversely affect the market.

We entered into a registration rights agreement with Red Cat in connection with the Business Combination and agreed to use our best efforts to file a registration statement 120 days after the consummation of the Offering and have such registration statement declared effective within 180 days. Upon registration and expiration of the 180-day lockup for Red Cat, Red Cat’s common stock will be freely-tradable. The following discussion refers to the public sale of our common stock by our other stockholders beginning after expiration of the lockup agreement all of our officers, directors and 5% shareholders have entered into. From time-to-time after the expiration of the lock-up period, our stockholders may be eligible to sell all or some of their common stock by means of ordinary brokerage transactions in the open market pursuant to Rule 144 promulgated under the Securities Act of 1933 (the “Securities Act”), subject to certain limitations. In general, Rule 144 provides that any non-affiliate of the Company who has held restricted common stock for at least six months, is entitled to publicly sell their restricted stock, provided that the Company stays current in its SEC filings. Affiliates, which would include an officer, director or other person in control of the Company may sell after a six month holding period from the date of purchase) with the following restrictions: (i) the Company is current in its SEC filings, (ii) the holders comply with certain manner of sale provisions, (iii) the holders file a Form 144, and (iv) the holders comply with volume limitations limiting the sale of shares within any three-month period to the greater of (1) a number of shares that does not exceed 1% of the total number of outstanding shares, or (2) the average weekly trading volume computed over a four week period. A person who has ceased to be an affiliate at least three months immediately preceding the applicable sale and who has owned such shares of common stock for at least six months may sell the shares under Rule 144 without regard to any of the limitations described above except for the current public information requirement.

Future sales of substantial amounts of our common stock in the public market, or the anticipation of these sales, could materially and adversely affect market prices prevailing from time-to-time, and could impair our ability to raise capital through sales of equity or equity-related securities. In addition, the market price of our common stock could decline as a result of sales of a large number of shares of our common stock in the market or the perception that these sales may occur.

If securities or industry analysts do not publish research or reports about our business, or if they adversely change their recommendations regarding our common stock, the market price for our common stock and trading volume could decline.

The trading market for our common stock will be influenced by research or reports that industry or securities analysts publish about our business. We do not currently have any analysts publish research reports about us, and we cannot assure you that any will. If analysts do, and one or more analysts who cover us downgrade our common stock, the market price for our common stock would likely decline. This Prospectus covers the resale of the Acquisition Shares and other shares of common stock by the Selling Stockholders.

We and our investors face the implications of our status as an emerging growth company under the federal securities laws and regulations.

We qualify as an “emerging growth company” pursuant to the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. As an emerging growth company, we have elected to take advantage of specified reduced reporting and other requirements compared to those that are otherwise applicable generally to public companies. These provisions include but are not limited to: reduced disclosure obligations regarding executive compensation in periodic reports, proxy statements and registration statements; and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved.

We will remain an emerging growth company until the earliest of (a) the last day of the fiscal year during which we have total annual gross revenues of at least $1.235 billion; (b) the last day of our fiscal year following February 16, 2029; (c) the date on which we have, during the preceding three-year period, issued more than $1.0 billion in non-convertible debt; or (d) the date on which we are deemed to be a “large accelerated filer” under the Exchange Act, which would occur as of the end of any fiscal year if the market value of our common stock that are held by non-affiliates exceeds $700 million as of the last business day of our most recently completed second fiscal quarter. Once we cease to be an emerging growth company, we will not be entitled to the exemptions provided in the JOBS Act discussed above.

We have never paid dividends and we do not expect to pay dividends for the foreseeable future.

We intend to retain earnings, if any, to finance the growth and development of our business and do not intend to pay cash dividends on shares of our common stock in the foreseeable future. The payment of future cash dividends, if any, depend upon, among other things, conditions then existing including earnings, financial condition and capital requirements, restrictions in financing agreements, business opportunities and other factors. As a result, capital appreciation, if any, of our common stock, will be your sole source of gain for the foreseeable future.

Our Certificate of Incorporation contains certain provisions which may result in difficulty in bringing stockholder actions against or on behalf of the Company or its affiliates.

Section 7 of our Certificate of Incorporation provides that the internal affairs of the Company, including stockholder derivative actions, shall be brought exclusively in commonwealth courts located in Puerto Rico. To the extent that any such action asserts a claim under the Exchange Act, that provision must be brought in federal court. Section 7 also provides that the United States federal courts generally shall have exclusive jurisdiction over claims brought under the Securities Act, the effect of which is that an action under the Securities Act with respect to the Company may only be brought in the federal courts, whereas absent such provision the federal and commonwealth courts would otherwise have concurrent jurisdiction over such a matter. Any claim seeking relief under the Exchange Act may only be brought in federal court. Further, Section 7 also provides for the United States District Court for the District of Puerto Rico as the exclusive venue for any cause of action under either the Securities Act or the Exchange Act, meaning such federal court is the only court in which such a case may be brought and heard. These provisions may have the effect of precluding stockholders from bringing suit in their forum or venue of choice. Further, these provisions may give rise to a potential ambiguity as to which courts – commonwealth or federal – should preside over certain cases such as cases with overlapping claims under both Puerto Rican corporate law and the Securities Act and the rules and regulations thereunder. While the Supreme Court of Delaware has upheld a charter provision designating federal courts as the exclusive forum for actions brought under the Securities Act, it is unclear how a court in another jurisdiction, including Puerto Rico, might rule. Therefore, an investor seeking to bring a claim against or on behalf of the Company or its affiliates under Puerto Rico law or the federal securities laws may be forced to litigate their case in a court which poses geographic or other hardships, and could face uncertainty as to which jurisdiction and venue the case will ultimately be heard in, which may delay, prevent or impose additional obstacles on the investor in such litigation. Investors cannot waive compliance with the federal securities laws and the rules and regulations thereunder, and there is uncertainty as to whether a state or federal court would enforce this charter provision. Assuming we proceed with our reincorporation in Nevada, the Nevada Articles of Incorporation have similar provisions except requiring litigation in Las Vegas, Nevada courts.

USE OF PROCEEDS

This Prospectus relates to the Securities that may be offered and sold from time-to-time by the Selling Stockholders. We will not receive any proceeds upon the sale of the Securities by the Selling Stockholders in this offering See “Plan of Distribution” elsewhere in this Prospectus for more information.

DIVIDEND POLICY

We have never declared nor paid any cash dividends on our common stock, and currently intend to retain all our cash and any earnings for use in our business and, therefore, do not anticipate paying any cash dividends in the foreseeable future. Any future determination to pay cash dividends on our common stock will be at the discretion of the Board and will be dependent upon our consolidated financial condition, results of operations, capital requirements and such other factors as the Board deems relevant.

DETERMINATION OF OFFERING PRICE

Each Selling Stockholder will determine at what price(s) such Selling Stockholder may sell the Securities, and such sales may be made at prevailing market prices, or at privately negotiated prices.

CAPITALIZATION

The following table sets forth our capitalization as of December 31, 2023:

The pro forma and pro forma as adjusted information below is illustrative only and our capitalization following the completion of the IPO is subject to adjustment based on the public offering price of our common stock. You should read this table in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes included elsewhere in this Prospectus. The following table assumes the issuance of 4,250,000 shares of our common stock at $4.00 per share, related to the Business Combination as described above, and 1,250,000 shares of our common stock at $4.00 per share, related to the IPO, and excludes the exercise of the over-allotment option by the underwriters and the issuance of the common stock underlying the warrants to be issued to the representative of the underwriters at the Closing of the IPO

________________

SELLING STOCKHOLDERS

We are registering the shares of common stock in order to permit the Selling Stockholders to offer the shares for resale from time to time. Except for the ownership of the shares of common stock, and as otherwise provided below, the Selling Stockholders have not had any material relationship with us within the past three years.

The table below lists the Selling Stockholders and other information regarding the beneficial ownership of the shares of common stock by each of the Selling Stockholders. The second column lists the number of shares of common stock beneficially owned by each of the Selling Stockholders, based on its ownership of the shares of common stock immediately prior to this offering.

The third column also lists the shares of common stock being registered by this Prospectus for the resale of the shares of common stock by the Selling Stockholders.

The Selling Stockholders may sell all, some or none of their shares in this offering. See “Plan of Distribution.”

Material Relationships with Selling Stockholders

Mr. Jeffrey Thompson is our founder and a director. Mr. Thompson is also the Chief Executive Officer of Red Cat. This Prospectus describes our acquisition of Fat Shark and Rotor Riot from Red Cat in the Business Combination. See “Business-The Business Combination and Business Overview.” Except for the privately negotiated purchases between certain Selling Stockholders and Mr. Thompson described above, none of the Business Combination and the Selling Stockholders have had any material relationship with us within the past three years.

PLAN OF DISTRIBUTION

Each Selling Stockholder of the Securities and any of their pledgees, assignees and successors-in-interest may, from time to time, sell any or all of their Securities covered hereby on the principal trading market or any other stock exchange, market or trading facility on which the Securities are traded or in private transactions. These sales may be at fixed or negotiated prices. A Selling Stockholder may use any one or more of the following methods when selling Securities:

The Selling Stockholders may also sell Securities under Rule 144 or any other exemption from registration under the Securities Act, if available, rather than under this Prospectus.

Broker-dealers engaged by the Selling Stockholders may arrange for other brokers-dealers to participate in sales. Broker-dealers may receive commissions or discounts from the Selling Stockholders (or, if any broker-dealer acts as agent for the purchaser of securities, from the purchaser) in amounts to be negotiated, but, except as set forth in a supplement to this Prospectus, in the case of an agency transaction not in excess of a customary brokerage commission in compliance with FINRA Rule 2121; and in the case of a principal transaction a markup or markdown in compliance with FINRA Rule 2121.

In connection with the sale of the securities or interests therein, the Selling Stockholders may enter into hedging transactions with broker-dealers or other financial institutions, which may in turn engage in short sales of the securities in the course of hedging the positions they assume. The Selling Stockholders may also sell our common stock short and deliver the Securities to close out their short positions, or loan or pledge the Securities to broker-dealers that in turn may sell these Securities. The Selling Stockholders may also enter into option or other transactions with broker-dealers or other financial institutions or create one or more derivative securities which require the delivery to such broker-dealer or other financial institution of Securities offered by this Prospectus, which Securities such broker-dealer or other financial institution may resell pursuant to this prospectus (as supplemented or amended to reflect such transaction).

The Selling Stockholders and any broker-dealers or agents that are involved in selling the Securities may be deemed to be “underwriters” within the meaning of the Securities Act in connection with such sales. In such event, any commissions received by such broker-dealers or agents and any profit on the resale of the Securities purchased by them may be deemed to be underwriting commissions or discounts under the Securities Act. Each Selling Stockholder has informed the Company that it does not have any written or oral agreement or understanding, directly or indirectly, with any person to distribute the Securities.

The Company is required to pay certain fees and expenses incurred by the Company incident to the registration of the Securities. The Company has agreed to indemnify the Selling Stockholders against certain losses, claims, damages and liabilities, including liabilities under the Securities Act.

With respect to Red Cat, we have entered into a registration rights agreement for the registration of 500,000 shares of our common stock that we issued to Red Cat in connection with the Business Combination and to use our best efforts to file a registration statement 120 days after the consummation of the IPO and have such registration statement declared effective within 180 days. Upon registration and expiration of the 180-day lockup for Red Cat, Red Cat’s common stock will be freely-tradable. These Acquisition Shares will be sold only through registered or licensed brokers or dealers if required under applicable state securities laws. In addition, in certain states, the Securities offered hereby may not be sold unless they have been registered or qualified for sale in the applicable state or an exemption from the registration or qualification requirement is available and is complied with.

Under applicable rules and regulations under the Exchange Act, any person engaged in the distribution of the Securities may not simultaneously engage in market making activities with respect to the shares of common stock for the applicable restricted period, as defined in Regulation M, prior to the commencement of the distribution. In addition, the Selling Stockholders will be subject to applicable provisions of the Exchange Act and the rules and regulations thereunder, including Regulation M, which may limit the timing of purchases and sales of the shares of common stock by the Selling Stockholders or any other person. We will make copies of this prospectus available to the Selling Stockholders and have informed them of the need to deliver a copy of this Prospectus to each purchaser at or prior to the time of the sale (including by compliance with Rule 172 under the Securities Act).

BUSINESS

Background of Unusual Machines

Unusual Machines is a Puerto Rico corporation, originally incorporated July 11, 2019, with our principal place of business in Orlando, Florida. The Company was incorporated in Puerto Rico under the name “Red Cat Motor Corporation” on July 11, 2019, before changing its name to “Aerocarve US Corporation” on October 20, 2020 and then to “Unusual Machines, Inc.” on July 5, 2022. The Company is in the process of reincorporating as a Nevada corporation.

Initial Public Offering

On February 16, 2024, the Company closed its IPO of 1,250,000 shares of common stock at a public offering price of $4.00 per share. The shares are traded on the NYSE American. Simultaneous with the closing of the IPO, the Company acquired Fat Shark and Rotor Riot from Red Cat.

The Business Combination & Business Overview

On November 21, 2022, the Company entered into the Purchase Agreement with Red Cat and Jeffrey Thompson, the founder and Chief Executive Officer of Red Cat, pursuant to which we agreed to purchase Red Cat’s consumer business consisting of Fat Shark and Rotor Riot (the “Business Combination”). Under the terms of the Purchase Agreement, as amended, the Company purchased Rotor Riot and Fat Shark subsidiaries for $20.0 million (the “Purchase Price”) comprised of (i) $1.0 million in cash, (ii) a $2.0 million promissory note (the “Note”) issued by the Company to Red Cat, and (iii) $17.0 million of the Company’s common stock or 4,250,000 shares of common stock at the $4.00 per share IPO price.

Fat Shark is a leader in designing and manufacturing ultra-low latency first-person-view (“FPV”) video goggles for drone pilots, which it markets towards retail distributors including Rotor Riot.

Rotor Riot is a rapidly growing e-commerce marketplace, backed by the largest community of FPV drone pilots in the world and retails FPV drones and goggles, parts, tools, drone components, and accessories manufactured by third-parties.

Unusual Machines specializes in the production and sale of small drones and essential components and with the acquisitions of Fat Shark and Rotor Riot, it brings brand recognition and a strong curated retail channel in the FPV drone market segment. Unusual Machines intends to build its business both organically and through strategic acquisitions that leverage our retail business to onshore production of critical drone components. With the transition to onshoring production of drone components, the Company intends to expand into B2B channels for customers that require a domestic supply chain.

The Drone Industry

The drone industry continues to expand to become a powerful business tool and recreational activity, with growth occurring broadly and across our targeted industries. According to Drone Industry Insights, the global drone market is expected to grow to $54.6 billion by 2030, with the commercial market growing at a 7.7% compound annual growth rate (“CAGR”). According to Allied Market Research, the drone component industry is likewise expanding. The drone flight controller market, valued at $15.53 billion in 2021 is expected to reach $28.86 billion by 2031. The drone motor market, valued at $2.6 billion in 2021 is projected to reach $9.9 billion by 2031.

Unusual Machines intends to pursue strategic acquisition targets that are cash flow positive and either sell drone parts or allow us to vertically integrate the production of drone parts. The Company believes that very promising, private companies (such as those the company will likely target) are in many instances underfunded and missing out on the ability to go public and bring their innovative products and solutions to a larger set of customers globally. We believe that unlocking this potential will be key to industry consolidation and breaking the dominance of China in the drone industry.

First Person View (FPV) Market Segment

Fat Shark and Rotor Riot principally operate in the FPV segment of the drone industry. This segment focuses on drones piloted with wearable display devices. These are head mounted displays (“HMDs”) or goggles for drone pilots. These goggles give pilots FPV perspective to control their drone in flight. This is a unique experience where the pilot is interacting with an aircraft through visual immersion. This experience is accomplished by live streaming footage from a camera mounted on the nose of the drone directly into specially designed goggles worn by the pilot. The image is transmitted via radio (traditionally analog but increasingly digital) to the pilot. The drone remote control unit, the drone, and the FPV goggles are all interconnected via radio. This effect requires sophisticated electronics that transmit visual information with sufficient speed and reliability to allow pilot control over the drone in real-time. Pilots routinely achieve speeds of over 90 mph in racing and other mission critical applications.

There are four common categories of FPV flight – freestyle flight, racing, cinema photography, and defense. In freestyle, the pilot navigates around obstacles focused on acrobatics and exploring the environment around the aircraft through the HMD. FPV racing describes a spectator sport where pilots fly their drones in competitions through a series of obstacles, flags, and gates in a racetrack. Cinema photography is the process of viewing and recording a subject matter from the air from the viewpoint of the pilot. Defense is a newer market segment characterized by the use cases emerging in the Ukrainian conflict.

Plans for Growth, Development, and Expansion

Unusual Machine’s plans to strengthen its market position through continued organic revenue growth. In parallel, the Company intends to aggressively invest in the extension of their business from just B2C sales to B2B sales of drone components. Unusual Machine’s business strategy includes (i) increasing its overall customer base with its products and rapid adoption; (ii) investing in new products and IP, starting with the Fat Shark and Rotor Riot acquisitions that were completed with our IPO, (iii) expanding and growing Unusual Machine’s customer base and revenue streams from its existing customer base using a “land-and-expand” model that establishes initial relationships and grows those relationships through the provision of high quality products and services, (iv) enhancing the company’s products to improve the integration of third-party solutions, and (v) seeking strategic partnerships and sponsorships with companies that want access to the FPV community.

Customers

Revenues for Fat Shark are principally generated through distributors and for Rotor Riot online through its e-commerce site, www.rotorriot.com. Both Fat Shark and Rotor Riot market their products and services to recreational and professional drone pilots and hobbyists.

Competition

Rotor Riot competes with a number of significantly larger, better capitalized companies. SZ DJI Technology Co., Ltd., commonly known as DJI, is the dominant market leader with a global market share estimated at more than 70%, according to industry research firms. Other competitors include GetFPV and Lumenier. Race Day Quads is a larger, direct competitor in the FPV sector. Rotor Riot competes against these competitors by leveraging its visibility on the internet through its Facebook page which has more than 38,000 followers and its Rotor Riot YouTube channel which has more than 272,000 subscribers. We believe that the Rotor Riot brand has been at the center of the racing and freestyle culture of drones since registering its domain name in 2015.

Fat Shark also competes with DJI along with other FPV headset companies including Skyzone FPV, Orqa, and HD Zero. The Fat Shark brand has been synonymous with FPV headsets since the emergence of the market in 2008. Fat Shark continues to compete through partnerships with other FPV companies and a focus on manufacturing and product quality.

Suppliers

Rotor Riot purchases inventory from approximately 50 suppliers although 57% of this inventory is purchased from four vendors. The two most critical components are electronics and frames. Approximately 95% of Rotor Riot’s inventory is purchased directly from Chinese vendors, all of which could be subject to varying tariffs. The United States has continuously increased tariffs since 2019, which Rotor Riot is currently subject to and range from 2% to 25%. These tariffs increase the cost of goods which reduces the company’s profit margins.

Fat Shark has sources over 90% of its components and inventory from a single Chinese supplier, Shenzhen Fatshark Co. Ltd. See “Related Party Transactions” for additional information.

Government Regulation and Federal Policy

National Defense Authorization Act and American Security Drone Act

In December 2023, Congress passed the National Defense Authorization Act (“NDAA”), which includes the American Security Drones Act (“ASDA”). The bill prohibits, starting in January 2026, federal agencies and federally funded programs from purchasing or using drones manufactured in countries that are viewed as threats to U.S. national security, such as China. The basis for the legislation is that purchases from these countries (i) pose a significant threat to national security, (ii) represent efforts to infiltrate and influence American society, and (iii) risk the theft of personal and business data. Specifically, the American Security Drone Act:

Federal Aviation Administration 

The Federal Aviation Administration (“FAA”) of the United States Department of Transportation is responsible for the regulation and oversight of civil aviation within the U.S. Its primary mission is to ensure the safety of civil aviation. The FAA has adopted the name “unmanned aircraft” (“UA”) to describe aircraft systems without a flight crew on board. More common names include drone, Unmanned Aerial Vehicle (“UAV”) and remotely operated aircraft.

The FAA began issuing regulations governing drones in 2005 with their scope and frequency expanding in recent years with the significant increase in the number of drones sold. In December 2015, the FAA announced that all drones weighing more than 250 grams, or 0.55 pounds, must be registered with the FAA. As of December 2023, the FAA reported the registration of almost 791,000 drones, of which approximately 370,000 were commercial and approximately 416,000 were recreational. In addition, more than 370,000 remote pilots were certified.

In January 2021, the FAA finalized rules requiring that drones be identifiable remotely. These rules are effective for drone manufacturers beginning in September 2022 and for drone pilots in September 2023. The FAA believes that remote ID technologies will enhance safety and security by allowing the FAA, law enforcement, and federal security agencies to identify drones flying in their jurisdiction. These efforts lay the foundation for more complex operations, such as those beyond visual line of sight at low altitudes, as the FAA and the drone industry move toward a traffic management ecosystem for Unmanned Aircraft System flights separate from, but complimentary to, the air traffic management system.

The Company believes that the oversight of the FAA is beneficial to the drone industry generally, and the Company specifically. Approximately 10 % of the drones sold by Rotor Riot are below the weight threshold required to register. The remaining 90% have more functionality, are more likely to be used for commercial purposes, and therefore, should be registered.

Environmental Considerations

Compliance with applicable environmental laws since inception has not had a material effect upon the Company’s capital expenditures, earnings or competitive position. However, drones are battery operated which use electricity for charging. To that extent, except for users who use solar and other non-electrical power to charge drones, users of drones the Company sells burn carbon which negatively affects the environment. Further, the SEC’s new climate change rules will likely increase our compliance costs.

Employees and Human Capital Resources

As of December 31, 2023, the Company had three full-time employees. However, with the completion of and acquisitions of Fat Shark and Rotor Riot, the Company had 14 full-time employees as of April 10, 2024.

Intellectual Property

The Company has consolidated its IP into a subsidiary, UMAC IP Holdings Corp. The IP portfolio primarily includes design and utility patents related to FPV headsets. None of the patents are currently licensed and IP is generated in the general course of doing engineering design.

The following table summarizes currently issued patents (indicated by “Issued”) including the grant dates thereof, and patent applications (indicated by “Pending or Published”). As the chart indicates, some of these patents are in the U.S., where when issued the patent protection generally applies for 20 years from the date the patent application was made (subject to potential extension, if applied for and granted). In general, patent protection provides the patent holder with a monopoly on the invention within its scope for the duration of the patent.

Trademark Portfolio

The following table summarizes current registered trademarks (indicated by “Registered”) including the registration dates. As the chart indicates, these trademarks are registered in the U.S. and abroad.

Unusual Machines has recently filed for a trademark on our logo.

Research and Development

Research and development activities are part of Unusual Machine’s business, and the Company will follow a disciplined approach to investing our resources to create new drone technologies and solutions. In the years ending December 31, 2023 and 2022, Fat Shark’s research and development costs were approximately 13.0% and 9.8%, respectively, of its revenues. A fundamental part of this approach is a well-defined screening process that helps us identify commercial opportunities that support desired technological capabilities in the markets we serve.

Legal Proceedings

From time to time, we are involved in various disputes, claims, suits, investigations, and legal proceedings arising in the ordinary course of business. We believe that the resolution of current pending legal matters will not have a material adverse effect on our business, financial condition, results of operations or cash flows. Nonetheless, we cannot predict the outcome of these proceedings, as legal matters are subject to inherent uncertainties, and there exists the possibility that the ultimate resolution of these matters could have a material adverse effect on our business, financial condition, results of operations or cash flows.

Properties

We own no properties. With the closing of our IPO, our principal place of business is located in Orlando, Florida at the Rotor Riot facility. In October 2023, Rotor Riot signed a five-year lease for a 6,900 sq. foot facility in Orlando, FL. We currently anticipate that the current leased space will be sufficient to support our current and future needs. In addition, we have an executive office located at 15 Ave. Muñoz Rivera, Suite 2200, San Juan, Puerto Rico 00901 which we sublet from Red Cat on month-to-month basis.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with the audited and unaudited financial statements (prepared in accordance with accounting principles generally accepted in the United States (“U.S. GAAP”)) and related notes included elsewhere in this Prospectus. The following discussion contains forward-looking statements that are subject to risks and uncertainties. See “Special Note Regarding Forward-Looking Statements” for a discussion of the uncertainties, risks, and assumptions associated with those statements. Actual results could differ materially from those discussed in or implied by forward-looking statements as a result of various factors, including those discussed below and elsewhere in this Prospectus, particularly in the section entitled “Risk Factors.” Unless we state otherwise or the context otherwise requires, the terms “we,” “us,” “our” and the “Company” refer to Unusual Machines, Inc. and its subsidiaries. All amounts presented in tables, other than per share amounts, are in thousands unless otherwise noted.

Recent Developments

Initial Public Offering

On February 16, 2024, the Company closed the IPO for the sale of 1,250,000 shares of common stock, at a public offering price of $4.00 per share. The IPO generated gross proceeds of $5.0 million and net proceeds of approximately $3.5 million.

Acquisition of Fat Shark and Rotor Riot

On November 21, 2022, the Company entered into the Purchase Agreement with Red Cat and Jeffrey Thompson, the founder and Chief Executive Officer of Red Cat, pursuant to which we agreed to purchase Red Cat’s consumer business consisting of Fat Shark and Rotor Riot. Fat Shark and Rotor Riot are in the business of designing and marketing consumer drones and FPV goggles. Rotor Riot is also a licensed authorized reseller of consumer drones manufactured by third-parties.

Under the terms of the Purchase Agreement, as amended, the Company purchased from Red Cat its Rotor Riot and Fat Shark subsidiaries for $20.0 million comprised of (i) $1.0 million in cash, (ii) a $2.0 million promissory note issued by the Company to Red Cat, and (iii) $17.0 million of the Company’s common stock or 4,250,000 shares of common stock.

Unusual Machines Results of Operations

Years Ended December 31, 2023 and 2022

Revenue

During the years ended December 31, 2023 and 2022, we did not generate any revenues and as such did not incur any cost of goods sold.

Operating Expenses

During the year ended December 31, 2023, we incurred general and administrative expenses totaling $1,794,455 compared to $1,242,732 for the year ended December 31, 2022, resulting in an increase of $551,723 or 44.4%. The increase primarily relates to increased legal expenses and professional fees related to the business combination and for preparation of becoming a public company.

Net Loss

Net loss for the year ended December 31, 2023, totaled $1,794,455 compared to $1,242,584 for the year ended December 31, 2022, resulting in an increase of $551,871 or 44.4%. The increase in net loss is almost entirely related to the increase in general and administrative expenses as we start to build out our operations for the business combination and becoming a public company.

Fat Shark Results of Operations

Nine Months Ended January 31, 2024 and 2023

Revenue

During the nine months ended January 31, 2024 (or the “2024 period”), Fat Shark generated revenues totaling $1,379,391 compared to $2,060,594 during the nine months ended January 31, 2023 (or the “2023 period”), representing a decrease of $681,203 or 33.1%. Revenues can fluctuate from period to period and are generally reflective of normal changes as the life cycles of the company’s products mature. Lower revenues for the 2024 period related to its newest product, the Dominator, which was launched at the beginning of the 2023 period, and while it generated strong initial sales in the first quarter, sales declined significantly since the 2023 period.

Cost of Goods Sold

During the nine months ended January 31, 2024, Fat Shark incurred cost of goods sold of $2,557,379 compared to $1,753,695 during the nine months ended January 31, 2023; resulting in an increase of $803,684 or 45.8%. The increase primarily related to an inventory impairment charge of $1,244,920 related to the Dominator goggles during the 2024 period.

Gross Margin

During the nine months ended January 31, 2024, Fat Shark’s gross margin was ($1,177,988) compared to $306,899 during the nine months ended January 31, 2023, resulting in a decrease of $1,484,887 or 483.8%. Fat Shark’s gross margin, as a percentage of sales, totaled (85.4%) during the nine months ended January 31, 2024, compared to 14.9% during the nine months ended January 31, 2023. The reported gross margin was adversely impacted by an impairment charge of $1,244,920 related to the write-down of Dominator inventory based on sales volumes and product discounts.

Operating Expenses

During the nine months ended January 31, 2024, Fat Shark’s operations expenses totaled $111,204 compared to $180,805 during the nine months ended January 31, 2023, resulting in a decrease of $69,601 or 38.5%. The decrease during the 2024 period reflects lower professional services fees compared to the 2023 period.

During the nine months ended January 31, 2024, Fat Shark incurred research and development expenses totaling $35,669 compared to $208,107 for the nine months ended January 31, 2023, resulting in a decrease of $172,438 or 82.9%. The decrease during the 2024 period reflects lower payroll costs compared to the 2023 period.

During the nine months ended January 31, 2024, Fat Shark’s sales and marketing expenses totaled $159 compared to $13,837 for the nine months ended January 31, 2023, resulting in a decrease of $13,678 or 98.9%. Sales and marketing expenses were higher during the 2023 period as the Company was preparing for the launch of the Dominator.

During the nine months ended January 31, 2024, Fat Shark incurred general and administrative expenses totaling $14,816 compared to $66,193 for the nine months ended January 31, 2023, resulting in a decrease of $51,377 or 77.6%. The decrease primarily relates to lower office and insurance costs compared to the 2023 period.

Net Loss

Fat Shark’s net loss for the nine months ended January 31, 2024, totaled $1,401,934 compared to $221,530 for the nine months ended January 31, 2023, resulting in an increase in net loss of $1,180,404 or 532.8%. This increase in net loss relates to the impairment charge related to the Dominator inventory resulting in lower gross margins during the 2024 period. This was partially offset by lower operating expenses compared to the 2023 period. The release of Fat Shark’s new generation product, the Dominator, took place during the 2023 period which resulted in higher revenues and gross margins in the 2023 period.

Fat Shark Results of Operations

Years Ended April 30, 2023 and 2022

Revenue

During the year ended April 30, 2023 (or the “2023 period”), Fat Shark generated revenues totaling $2,317,444 compared to $2,627,792 during the year ended April 30, 2022 (or the “2022 period”), representing a decrease of $310,348 or 11.8%. Revenues can fluctuate from period to period and are generally reflective of normal changes as the life cycles the company’s products mature. Lower revenues for the 2023 period related to its newest product, the Dominator, which was launched at the beginning of the 2022 period, and while it generated strong initial sales in the first quarter, sales declined significantly over the remaining quarters in Fiscal 2023.

Cost of Goods Sold

During the year ended April 30, 2023, Fat Shark’s incurred cost of goods sold of $2,159,159 compared to $2,569,307 during the year ended April 30, 2022; resulting in a decrease of $410,148 or 16.0%. The decrease related to lower revenues during the 2023 period.

Gross Margin

During the year ended April 30, 2023, Fat Shark gross margin was $158,285 compared to $58,485 during the year ended April 30, 2022, resulting in an increase of $99,800 or 170.6%. Fat Shark’s gross margin, as a percentage of sales, totaled 6.8% during the year ended April 30, 2023 compared to 2.2% during the year ended April 30, 2022. The lower gross margin in the 2022 period related to price reductions of the prior digital goggle as Fat Shark prepared for the launch of the Dominator early in the 2023 period. Separately, Fat Shark recorded a charge of $182,845 related to the write-off of excess quantities of Dominator inventory based on sales volumes during the second half of the year ended April 30, 2023.

Operating Expenses

During the year ended April 30, 2023, Fat Shark’s operations expenses totaled $240,945 compared to $252,545 during the year ended April 30, 2022, resulting in a decrease of $11,600 or 4.6%. The decrease during the 2023 period reflects lower professional services fees compared to the 2022 period.

During the year ended April 30, 2023, Fat Shark incurred research and development expenses totaling $280,515 compared to $407,881 for the year ended April 30, 2022, resulting in a decrease of $127,366 or 31.2%. The decrease during the 2023 period reflects lower payroll and material costs compared to the 2022 period. During the 2022 period, Fat Shark incurred higher payroll and material costs related to its next generation product release.

During the year ended April 30, 2023, Fat Shark’s sales and marketing expenses totaled $16,858 compared to $60,616 for the year ended April 30, 2022, resulting in a decrease of $43,758 or 72.2%. Sales and marketing expenses were higher during the 2022 period as the Company was preparing for the launch of the Dominator.

During the year ended April 30, 2023, Fat Shark incurred general and administrative expenses totaling $88,277 compared to $169,096 for the year ended April 30, 2022, resulting in a decrease of $80,819 or 47.8%. The decrease primarily relates to lower payroll, facilities, and business travel costs compared to the 2022 period.

Net Loss

Fat Shark’s net loss for the year ended April 30, 2023 totaled $546,121 compared to $910,723 for the year ended April 30, 2022, resulting in a decrease of $364,602. This decrease relates to improved gross margins and lower operating expenses during the 2023 period. During the 2022 period, Fat Shark’s gross margin was lower related to pricing discounts on end-of-life cycle products and higher research and development expenses related to the release of the new generation product, the Dominator.

Rotor Riot Results of Operations

Nine Months Ended January 31, 2024 and 2023

Revenue

During the nine months ended January 31, 2024 (or the “2024 period”), Rotor Riot generated revenues totaling $3,122,673 compared to $2,534,514 during the nine months ended January 31, 2023 (or the “2023 period”), representing an increase of $588,159 or 23.2%. Revenues can fluctuate from period to period and are generally reflective of normal changes through the life cycles of the products that the company sells. During the 2024 period, higher revenues were generated by a significant increase in digital marketing spending.

Cost of Goods Sold

During the nine months ended January 31, 2024, Rotor Riot incurred cost of goods sold of $2,186,039 compared to $2,170,151 during the nine months ended January 31, 2023, resulting in a decrease of $15,888 or 0.7%. The decrease related to higher revenues during the 2024 period.

Gross Margin

During the nine months ended January 31, 2024, Rotor Riot’s gross margin was $936,634 compared to $364,363 during the nine months ended January 31, 2023, resulting in an increase of $572,271 or 157.1%. Gross margin, as a percentage of sales, totaled 30.0% during the nine months ended January 31, 2024, compared to 14.4% during the nine months ended January 31, 2023. The higher level of gross margin is primarily related to successful efforts to reduce tariff expenses for inventory purchases.

Operating Expenses

During the nine months ended January 31, 2024, Rotor Riot incurred operations expense totaling $560,660 compared to $303,535 during the nine months ended January 31, 2023, resulting in an increase of $257,125 or 84.7% primarily related to increased payroll costs. Payroll expenses totaled $303,064 in the 2024 period compared to $207,929 in the 2023 period, resulting in an increase of $95,135 or 46%. This increase represented 37.0% of the total increase in operations expenses. The remaining increase is primarily attributable to increased office costs and professional fees.

During the nine months ended January 31, 2024, Rotor Riot incurred research and development expenses totaling $78,013 compared to $42,927 for the nine months ended January 31, 2023, resulting in an increase of $35,086 or 81.7%. The increase was entirely due to increased payroll costs.

During the nine months ended January 31, 2024, Rotor Riot incurred sales and marketing expenses totaling $978,276 compared to $542,079 for the nine months ended January 31, 2023, resulting in an increase of $436,197 or 80.5%. The increase primarily relates to an increase in payroll and advertising program costs for Rotor Riot. Payroll expenses totaled $297,515 in the 2024 period compared to $190,553 in the 2023 period, resulting in an increase of $106,962 or 56%. Advertising expenses totaled $476,637 in the 2024 period compared to $316,237 in the 2023 period, resulting in an increase of $160,400 or 51%. The increases in payroll and advertising expenses represented 25% and 37%, respectively, of the total increase in sales and marketing expenses.

During the nine months ended January 31, 2024, Rotor Riot incurred general and administrative expenses totaling $81,796 compared to $210,128 for the nine months ended January 31, 2023, resulting in a decrease of $128,332 or 61.1%. The decrease is primarily related to lower banking fees and meals, travel, and training in the 2024 period.

Net Loss

Rotor Riot’s net loss for the nine months ended January 31, 2024, totaled $929,018 compared to $876,551 for the nine months ended January 31, 2023, resulting in a decrease in net loss of $52,467 or 6.0%. The decrease in net loss is primarily related to improved gross margins during the 2024 period.

Rotor Riot Results of Operations

Year Ended April 30, 2023 and 2022

Revenue

During the year ended April 30, 2023 (or the “2023 period”), Rotor Riot generated revenues totaling $3,447,149 compared to $2,028,149 during the year ended April 30, 2022 (or the “2022 period”), representing an increase of $1,419,000 or 70.0%. Revenues can fluctuate from period to period and are generally reflective of normal changes through the life cycles of the products that the company sells. During the 2023 period, higher revenues were generated by a significant increase in digital marketing spending.

Cost of Goods Sold

During the year ended April 30, 2023, Rotor Riot incurred cost of goods sold of $3,015,398 compared to $1,587,674 during the year ended April 30, 2022, resulting in an increase of $1,427,724 or 89.9%. The increase related to higher revenues during the 2023 period.

Gross Margin

During the year ended April 30, 2023, Rotor Riot’s gross margin was $431,751 compared to $440,475 during the year ended April 30, 2022, resulting in a decrease of $8,724 or 2.0%. Gross margin, as a percentage of sales, totaled 12.5% during the year ended April 30, 2023 compared to 21.7% during the year ended April 30, 2022. The lower level of gross margin is primarily related to higher costs of products being sold including increases in material costs due to the global supply chain issues.

Operating Expenses

During the year ended April 30, 2023, Rotor Riot incurred operations expense totaling $403,912 compared to $372,473 during the year ended April 30, 2022, resulting in an increase of $31,439 or 8.4% primarily related to increased payroll costs.

During the year ended April 30, 2023, Rotor Riot incurred research and development expenses totaling $65,487 compared to $58,719 for the year ended April 30, 2022, resulting in an increase of $6,768 or 11.5%. The increase primarily relates to increased payroll costs.

During the year ended April 30, 2023, Rotor Riot incurred sales and marketing expenses totaling $845,526 compared to $220,007 for the year ended April 30, 2022, resulting in an increase of $625,519 or 284.3%. The increase primarily relates to an increase in payroll and advertising program costs for Rotor Riot.

During the year ended April 30, 2023, Rotor Riot incurred general and administrative expenses totaling $311,301 compared to $220,366 for the year ended April 30, 2022, resulting in an increase of $90,935 or 41.3%. The increase is primarily related to increased information technology costs associated with the implementation of more sophisticated software systems. Additionally, payroll, office, travel and professional fees also increased.

Net Loss

Rotor Riot’s net loss for the year ended April 30, 2023 totaled $1,387,866 compared to $596,878 for the year ended April 30, 2022, resulting in an increase of $790,988 or 132.5%. The increase in net loss is primarily related to increased stock compensation, general and administrative, and sales and marketing expenses.

Unusual Machines Cash Flows

Years Ended December 31, 2023 and 2022

Operating Activities

Net cash used in operating activities was $2,201,485 during the year ended December 31, 2023 compared to net cash used in operating activities of $1,231,794 during the year ended December 31, 2022, representing an increase of $969,691 or 78.7%. This increase in net cash used primarily resulted from our increase in net loss of $551,871, increase in deferred offering costs of $337,108 and working capital of $84,482 offset by non-cash expenses of $4,715.

Investing Activities

Net cash used in investing activities was $3,164 during the year ended December 31, 2023 compared to net cash used in operating activities of $4,575 during the year ended December 31, 2022, representing a decrease of $1,411 or 30.8%. This decrease in net cash used related to timing of purchasing additional computer equipment.

Financing Activities

Net cash provided by financing activities totaled $0 during the year ended December 31, 2023 compared to $549,900 during the year ended December 31, 2023, resulting in a decrease in net cash provided by financing activities of $549,900 or 100%. The decrease is entirely related to proceeds received from exempt private offerings of our common stock.

Fat Shark Cash Flows

Nine Months Ended January 31, 2024 and 2023

Operating Activities

Fat Shark net cash provided by operating activities was $420,974 during the nine months ended January 31, 2024, compared to net cash used in operating activities of $3,515,745 during the nine months ended January 31, 2023, representing an increase of $3,936,539 or 112.0% in net cash provided by operating activities. This increase in net cash provided by operating activities primarily resulted from Fat Shark’s change in inventory, other assets which consists primarily of prepaid inventory, and accounts receivable totaling $6,069,286, offset by a decrease in net loss of $1,180,404 which includes an inventory impairment charge of $927,765, non-cash expenses of $8,973 and changes in working capital of $943,370.

Financing Activities

Fat Shark net cash used in financing activities totaled $475,318 during the nine months ended January 31, 2024, compared to net cash provided by financing activities of $3,429,027 during the nine months ended January 31, 2023. The cash used in financing activities in 2024 consisted entirely of payments under debt obligations. The cash provided by financing activities in 2023 consisted entirely of proceeds from a related party.

Fat Shark Cash Flows

Years Ended April 30, 2023 and 2022

Operating Activities

Fat Shark net cash used in operating activities was $3,688,211 during the year ended April 30, 2023 compared to net cash used in operating activities of $783,810 during the year ended April 30, 2022, representing an increase of $2,904,401 or 370.5%. This increase in net cash used primarily resulted from Fat Shark’s increase in inventory and other assets which consists primarily of prepaid inventory of $3,607,636 offset by a decrease in net loss of $364,602, non-cash expenses of $19,341 and changes in working capital of $319,292.

Financing Activities

Fat Shark net cash provided by financing activities totaled $3,664,732 during the year ended April 30, 2023 compared to $848,195 during the year ended April 30, 2022. The cash provided by financing activities in 2023 consisted entirely of proceeds from a related party. The cash provided by financing activities in 2022 consisted of $2,468,995 of proceeds from a related party offset by $1,620,880 payments on debt obligations.

Rotor Riot Cash Flows

Nine Months Ended January 31, 2024 and 2023

Operating Activities

Rotor Riot net cash used in operating activities was $1,202,275 during the nine months ended January 31, 2024, compared to net cash used in operating activities of $1,287,238 during the nine months ended January 31, 2023, representing a decrease of $84,963 or 6.6%. This decrease in net cash used primarily resulted from Rotor Riot’s decrease in net loss of $52,467, an increase in non-cash related expenses of $46,944, offset by an increase in changes in working capital of $90,486.

Financing Activities

Rotor Riot net cash provided by financing activities totaled $1,296,914 during the nine months ended January 31, 2024, compared to $1,328,750 during the nine months ended January 31, 2023. The cash provided by financing activities in 2024 consisted of proceeds from a related party of $1,198,473, and proceeds from debt obligations of $262,856, offset by payments on debt obligations of $164,415. Cash provided by financing activities in 2023 consisted of $1,328,750 of proceeds from a related party.

Rotor Riot Cash Flows

Years Ended April 30, 2023 and 2022

Operating Activities

Rotor Riot net cash used in operating activities was $1,358,620 during the year ended April 30, 2023 compared to net cash used in operating activities of $678,206 during the year ended April 30, 2022, representing an increase of $680,414 or 100.3%. This increase in net cash used primarily resulted from Rotor Riot’s increase in net loss of $790,988 offset by non-cash expense of $40,355 and changes in working capital of $70,219.

Financing Activities

Rotor Riot net cash provided by financing activities totaled $1,339,491 during the year ended April 30, 2023 compared to $591,339 during the year ended April 30, 2022. The cash provided by financing activities in 2023 consisted entirely of proceeds from a related party of $1,339,491. Cash provided by financing activities in 2022 consisted of $860,384 of proceeds from a related party offset by payments on debt obligations of $269,045.

Unusual Machines Liquidity and Capital Resources

As of December 31, 2023, we had current assets totaling $1,528,162 primarily consisting of cash balances of $894,773 and deferred offering costs of $512,758. Our current liabilities as of December 31, 2023 totaled $114,497, consisting entirely of accounts payable and accrued expenses. Our net working capital as of December 31, 2023 was $1,413,665.

On February 16, 2024, we completed our IPO for the sale of 1,250,000 shares of common stock at a public offering price of $4.00 per share for gross proceeds of $5.0 million. After paying certain underwriting discounts and commissions, business combination expenses and other expenses related to the IPO, we received approximately $3.5 million in net proceeds. Our cash balance as of March 21, 2024 was approximately $3.2 million.

To date, our operations have been funded exclusively by exempt private offerings of our common stock. In September of 2021, we closed a private offering of 4,552,000 shares of common stock at a price of $0.50 per share for total proceeds of $2,276,000. On December 31, 2021, we closed an additional private offering of 482,500 shares of common stock at a price of $4.00 per share for total gross proceeds of $1,930,000, of which we received net proceeds of $1,842,000 after fees and other expenses. On July 25, 2022, we closed an additional private offering of 150,000 shares of common stock at a price of $4.00 per share for total proceeds of $600,000.

We believe that the net proceeds from our February 2024 IPO and existing cash balances will be sufficient to fund our current operating plans through at least the next 12 months. We have based these estimates, however, on assumptions that may prove to be wrong, and we could spend our available financial resources much faster than we currently expect and need to raise additional funds sooner than we anticipate. If we are unable to raise capital when needed or on acceptable terms, we may be forced to delay, reduce or eliminate certain operational efforts. We do not anticipate any significant cost increases post Fat Shark and Rotor Riot acquisitions and with consideration of the combined companies’ net loss and cash position, we expect we will have sufficient working capital to support our operations for at least 12 months following the closing of the IPO.

Going Concern

The reports from the independent registered public accounting firm for the fiscal year ended April 30, 2023 for Fat Shark Holdings Ltd. and for the fiscal year ended April 30, 2023 for Rotor Riot, LLC, includes an explanatory paragraph stating each company has recurring net losses from operations, has negative operating cash flows, does not yet generate revenue from operations and will need additional working capital for ongoing operations. These factors, among others, raise substantial doubt about each company's ability to continue as a going concern. With the closing of our IPO in February 2024, we expect each will no longer operate as a going concern.

Critical Accounting Policies and Estimates

Our financial statements and accompanying notes have been prepared in accordance with GAAP applied on a consistent basis. The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting periods.

We regularly evaluate the accounting policies and estimates that we use to prepare our financial statements. A complete summary of these policies is included in the notes to our financial statements. In general, management’s estimates are based on historical experience, on information from third party professionals, and on various other assumptions that are believed to be reasonable under the facts and circumstances. Actual results could differ from those estimates made by management. 

Property and equipment are stated at cost. Depreciation and amortization are computed using straight-line methods over the estimated useful lives of the related assets. When property and equipment is retired or otherwise disposed of, the related cost and accumulated depreciation are removed from the respective accounts, and any resulting gain or loss on disposition is reflected in operations. Repairs and maintenance are expensed as incurred; expenditures for additions, improvements and replacements are capitalized. The various classes of fixed assets are depreciated over their estimated useful lives as follows:

Computer equipment – 3 years

Goodwill represents the excess of the purchase price of an acquisition over the estimated fair value of identifiable net assets acquired. The measurement periods for the valuation of assets acquired and liabilities assumed ends as soon as information on the facts and circumstances that existed as of the acquisition date becomes known, not to exceed 12 months. Adjustments in a purchase price allocation may require a change in the amounts allocated to goodwill during the periods in which the adjustments are determined.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

Recently Issued Accounting Pronouncements

The Company has implemented all new accounting pronouncements that are in effect. These pronouncements did not have any material impact on the financial statements unless otherwise disclosed, and the Company does not believe that there are any other new accounting pronouncements that have been issued that might have a material impact on its financial position or results of operations.

MANAGEMENT

The following table sets forth information regarding our current directors and executive officers:

Biographies

Dr. Allan Evans, Chief Executive Officer and Chairman of the Board of Directors

Dr. Allan Evans was appointed to serve as the Chief Executive Officer and a director of the Company effective December 4, 2023. Prior to becoming our Chief Executive Officer, Dr. Evans was the Chief Operating Officer of Red Cat from January 2021 to November 2023 and was the Chief Executive Officer of Fat Shark. As part of his compensation package with Red Cat, Dr. Evans beneficially owns 1,443,395 shares of common stock and 875,000 unvested options in Red Cat. Dr. Evans is a serial entrepreneur with a history of founding and leading technological innovation. He has extensive experience in overseeing different emerging technologies. From August 2017 to October 2020, Dr. Evans served as a board member for Ballast Technologies, a company that specialized in technology for location-based entertainment. In November 2012, he co-founded Avegant, a technology company focused on developing next generation display technology to enable previously impossible augmented reality experiences. He led design, development, and initial production of the Glyph head mounted display and oversaw technology research and patent strategy while serving as Chief Technology Officer of Avegant until 2016. Dr. Evans has 47 pending or issued patents that cover a range of technologies from implantable medical devices to mixed reality headsets. Academically, his work has an h-index of 15, an i-index of 28, and has been cited in more than 1,000 publications. He has extensive experience with new technologies, engineering, business development, and corporate strategy, and his expertise in these areas strengthens the Company’s collective knowledge and capabilities.

Dr. Evans’ management and public company experience, his experience in the drone business and his role as Chief Executive Officer of the Company, led to his appointment as a director.

Brian Hoff, Chief Financial Officer

Mr. Hoff has served as the Company’s Chief Financial Officer since November 2022. Prior to that, he served as the Chief Financial Officer of Auddia, Inc. (Nasdaq: AUUD), a technology company focused on audio media, from April 2021 to October 2022. He served as Vice President and Controller at STACK Infrastructure, a digital infrastructure company, from October 2019 to April 2021, and as Controller at Coalfire, a cybersecurity company, from November 2011 until October 2019.

Andrew Camden, Chief Operation Officer

Mr. Camden, who became our Chief Operating Officer on March 4, 2024, has been President of Rotor Riot since 2018. Prior to that, he worked for four years as an engineer for General Motors.

Cristina A. Colón, Esq., Director

Ms. Colón has a served as a director of the Company since August 2022. Ms. Colón has been the owner of Cinmarc & Associates LLC, a public housing consulting firm, since 2018 and has served as its President since August 2021. Ms. Colón has also been the owner/operator Café de La Plaza, a restaurant located in Palmas del Mar, Puerto Rico, since 2009. From 2019 to 2021, Ms. Colón served as an investor relations specialist at OptimizeRX, a medical technology company. Ms. Colón’s experience as an entrepreneur and her marketing and investor relations experience led to her appointment as a director. Ms. Colon is also a lawyer in Puerto Rico and Florida.

Robert Lowry, Director

Mr. Lowry has served as a director of the Company since August 2022. Mr. Lowry has been the owner of Sebring Assisted Living Facility since 1998, and the owner of Homestead Assisted Living Facility since 2007. Mr. Lowry’s experience as a business entrepreneur and his experience in operational finance led to his appointment as a director.

Sanford Rich, Director

Mr. Rich serves as director and Audit Committee member of the Company since January 31, 2024. Since March 2012, Mr. Rich has served as a director of Aspen Group, Inc. and since November 29, 2019, as Audit Committee Chairman. From August 2, 2017 to June 23, 2019, Aspen Group, Inc. had its common stock listed on the Nasdaq Capital Market and from June 24, 2019 to March 23, 2023, Aspen Group, Inc. had its common stock listed on Nasdaq Global Market, after which it voluntarily withdrew to focus on its core business and save money. Since January 2016, Mr. Rich has served as the Executive Director of the New York City Board of Education Retirement System. Mr. Rich also served as a member of the Investor Advisory Group of the PCAOB for a term from June 1, 2022 to December 31, 2023. From November 2012 to January 2016, Mr. Rich served as the Chief of Negotiations and Restructuring for the Pension Benefit Guaranty Corporation (a United States Government Agency). Mr. Rich was selected as a director for his 40 years of experience in the financial sector and his experience serving on the audit committees of public companies.

Jeffrey Thompson, Director

Mr. Thompson has served as a director of the Company since inception in 2019. He served as the Company’s principal executive officer from inception until April 2022. Mr. Thompson has been President and Chief Executive Officer of Red Cat since May 15, 2019. Mr. Thompson was a director of Panacea Life Sciences Holdings, Inc. (OTCQB:PLSH), a producer and marketer of products made from industrial hemp (CBD), from January 2019 until April 2020. In 2016, Mr. Thompson founded Red Cat Propware Inc., a provider of cloud-based analytics, storage, and services for drone aircraft, and served as its Chief Executive Officer until May 15, 2019 when it was acquired by Red Cat. Mr. Thompson’s management and public company experience, his experience in the drone business and his role as President and Chief Executive Officer of Red Cat, led to his appointment as a director.

CORPORATE GOVERNANCE

Composition of our Board

Our Board currently consists of five members. Our directors hold office until their successors have been elected and qualified or until the earlier of their death, resignation or removal. There are no family relationships among any of our directors or executive officers.

Director Independence

Our Board has determined that all of our present directors are independent, in accordance with standards under the NYSE Listing Rules, other than Dr. Evans and Mr. Thompson. Our Board determined that, under the NYSE Listing Rules, Dr. Evans is not an independent director because he is the Chief Executive Officer of the Company. It has also been determined that Mr. Thompson is not an independent director, having previously been Chief Executive Officer of the Company in the last three years.

Our Board has determined that Mr. Lowry, Mr. Rich, and Ms. Colón are independent under the NYSE Listing Rules’ independence standards for Audit Committee members. Our Board has also determined that they are independent under the NYSE Listing Rules independence standards for Compensation Committee members and for Governance and Nominating committee members.

Committees of the Board

Audit Committee

The Audit Committee currently consists of Mr. Rich (Chair), Mr. Lowry, and Ms. Colón. Each member of the Audit Committee is an independent director as defined by the rules of the SEC and NYSE American. The Audit Committee has the sole authority and responsibility to select, evaluate and engage independent auditors for the Company. The Audit Committee reviews with the auditors and with the Company’s financial management all matters relating to the annual audit of the Company.

The Audit Committee monitors the integrity of our financial statements, monitors the independent registered public accounting firm’s qualifications and independence, monitors the performance of our internal audit function and the auditors, and monitors our compliance with legal and regulatory requirements. The Audit Committee also meets with our auditors to review the results of their audit and review of our annual and interim financial statements.

The Audit Committee plans to meet at least on a quarterly basis to discuss with management the annual audited financial statements and quarterly financial statements and meets from time to time to discuss general corporate matters.

Audit Committee Financial Expert

Our Board determined that Mr. Rich is qualified as an Audit Committee Financial Expert, as that term is defined by the rules of the SEC, in compliance with the Sarbanes-Oxley Act of 2002.

Compensation Committee

The Compensation Committee currently consists of Mr. Lowry (Chair), Ms. Colón, and Mr. Rich each of whom are independent directors. Among other things, the Compensation Committee reviews, recommends and approves salaries and other compensation of the Company’s executive officers, and administers the Company’s Equity Incentive Plan (including reviewing, recommending and approving stock option and other equity incentive grants to executive officers).

The Compensation Committee will meet in executive session to determine the compensation of the Chief Executive Officer of the Company. In determining the amount, form, and terms of such compensation, the Committee will consider the annual performance evaluation of the Chief Executive Officer conducted by the Board in light of company goals and objectives relevant to Chief Executive Officer compensation, competitive market data pertaining to Chief Executive Officer compensation at comparable companies, and such other factors as it deems relevant, and is guided by, and seeks to promote, the best interests of the Company and its shareholders.

In addition, subject to existing agreements, the Compensation Committee is authorized to determine the salaries, bonuses, and other matters relating to compensation of the executive officers of the Company using similar parameters. It may set performance targets for determining periodic bonuses payable to executive officers. It is also authorized to review and make recommendations to the Board regarding executive and employee compensation and benefit plans and programs generally, including employee bonus and retirement plans and programs (except to the extent specifically delegated to a Board appointed committee with authority to administer a particular plan). In addition, the Compensation Committee approves the compensation of non-employee directors and reports it to the full Board.

The Compensation Committee also reviews and makes recommendations with respect to shareholder proposals related to compensation matters.

The Compensation Committee may, in its sole discretion and at the Company’s cost, retain or obtain the advice of a compensation consultant, legal counsel or other adviser. The Compensation Committee is directly responsible for the appointment, compensation and oversight of the work of any compensation consultant, legal counsel and other adviser retained by the committee.

Corporate Governance and Nominating Committee

The Corporate Governance and Nominating Committee (the “Nominating Committee”) consists of Ms. Colón (Chair), Mr. Lowry, and Mr. Rich, each of whom meets the independence requirements of all other applicable laws, rules and regulations governing director independence, as determined by the Board.

The Nominating Committee has the authority to identify individuals qualified to become members of the Board, consistent with criteria approved by the Board; recommend to the Board the director nominees for the next annual meeting of shareholders at which directors are to be elected; recommend to the Board candidates to fill any vacancies on the Board; develops, recommend to the Board, and reviews the corporate governance guidelines applicable to the Company; and oversees the evaluation of the Board and management.

It is authorized to consider and recruit candidates to fill positions on the Board, including as a result of the removal, resignation or retirement of any director, an increase in the size of the Board or otherwise. The Nominating Committee has the authority to conduct, subject to applicable law, any and all inquiries into the background and qualifications of any candidate for the Board and such candidate’s compliance with the independence and other qualification requirements established by the Nominating Committee.

In selecting and recommending candidates for election to the Board or appointment to any committee of the Board, the Nominating Committee does not believe that it is appropriate to select nominees through mechanical application of specified criteria. Rather, the Nominating Committee shall consider such factors at it deems appropriate, including, without limitation, the following: personal and professional integrity, ethics and values; experience in corporate management, such as serving as an officer or former officer of a publicly-held company; experience in the Company’s industry; experience as a board member of another publicly-held company; diversity as required by the NYSE Rules; diversity of expertise and experience in substantive matters pertaining to the Company’s business relative to other directors of the Company; practical and mature business judgment; and composition of the Board (including its size and structure).

The Nominating Committee will develop and recommend to the Board a policy regarding the consideration of director candidates recommended by the Company’s shareholders and procedures for submission by shareholders of director nominee recommendations.

The Nominating Committee oversees the evaluation of the Board and management. It also develops and recommends to the Board a set of corporate governance guidelines applicable to the Company, which the Nominating Committee shall periodically review and revise as appropriate. In discharging its oversight role, the Nominating Committee is empowered to investigate any matter brought to its attention.

Board Diversity

While we do not have a formal policy on diversity, the Board considers diversity to include race, ethnicity, gender as well as the skill set, background, reputation, type and length of business experience of the Board members as well as a particular nominee’s contributions to that mix. The Board believes that diversity brings a variety of ideas, judgments and considerations that benefit the Company and its shareholders. Although there are many other factors, the Board seeks individuals with experience on operating and growing businesses.

Board Leadership Structure

Allan Evans serves as the Chairman of the Board and actively interfaces with management, the Board and counsel regularly. We believe that Dr. Evans’s experience as an entrepreneur and Chief Executive Officer of a drone company will help the Company with the challenges faced by us at this stage – integrating the acquisition of Fat Shark and Rotor Riot as well as implementing our business and marketing plans, integrating the acquisitions, continuing and managing our growth. We believe that Mr. Evans, Mr. Thompson and the other members of the Board will assist the Company’s management with both the operational aspects as well as the strategic aspects of our business.

Board Risk Oversight

The Company’s risk management function is overseen by the Board. The Company’s management keeps the Board apprised of material risks and provides its directors access to all information necessary for them to understand and evaluate how these risks interrelate, how they affect us, and how management addresses those risks. Allan Evans, Chairman of the Board, works closely together with the other members of the Board when material risks are identified on how to best address such risks. If the identified risk poses an actual or potential conflict with management, the Company’s independent directors may conduct the assessment. Presently, the primary risks affecting us are our liquidity and the lack of revenue.

Family Relationships

There are no family relationships among any of our officers or directors. However, our Chief Executive Officer’s sister is a senior officer of Red Cat.

Involvement in Legal Proceedings

We are not aware of any of our directors or officers being involved in any legal proceedings in the past 10 years relating to any matters in bankruptcy, insolvency, criminal proceedings (other than traffic and other minor offenses) or being subject to any of the items set forth under Item 401(f) of Regulation S-K of the SEC.

Code of Ethics

The Board has adopted a Code of Business Conduct and Ethics (the “Code of Ethics”) that applies to all of the Company’s employees, including the Company’s Chief Executive Officer and Chief Financial Officer. Although not required, the Code of Ethics also applies to the Company’s directors. The Code of Ethics provides written standards that we believe are reasonably designed to deter wrongdoing and promote honest and ethical conduct, including the ethical handling of actual or apparent conflicts of interest between personal and professional relationships, full, fair, accurate, timely and understandable disclosure and compliance with laws, rules and regulations and the prompt reporting of illegal or unethical behavior, and accountability for adherence to the Code of Ethics. We will provide a copy, without charge, to anyone that requests a copy of our Code of Ethics in writing by contacting 4677 L B McLeod Rd, Suite J, Orlando, FL 32811, Attention: Corporate Secretary.

Insider Trading Arrangements and Policies

We are committed to promoting high standards of ethical business conduct and compliance with applicable laws, rules, and regulations. As part of this commitment, we have adopted our Insider Trading Policy governing the purchase, sale, and/or other dispositions of our securities by our directors, officers, and employees that we believe is reasonably designed to promote compliance with insider trading laws, rules and regulations, and the exchange listing standards applicable to us.

Hedging

Under the Company’s Insider Trading Policy, all officers, directors and certain identified employees are prohibited from engaging in hedging transactions.

Clawback Policy

Additionally, our Board has adopted a policy relating to recovery of erroneously awarded compensation (a “Clawback Policy”) in accordance with the rules of the NYSE American, to recoup “excess” incentive compensation, if any, earned by current and former executive officers during a three year look back period in the event of a financial restatement due to material noncompliance with any financial reporting requirement under the securities laws (with no fault required).

EXECUTIVE COMPENSATION

Executive Compensation Overview

As an “emerging growth company,” we have opted to comply with the executive compensation disclosure rules applicable to “smaller reporting companies,” as such term is defined in the rules promulgated under the Securities Act.

This section provides an overview of the compensation awarded to, earned by, or paid to each individual who served as our principal executive officer during our fiscal year 2023. Our named executive officers, or the Named Executive Officers, for the year ended December 31, 2023, are:

Unusual Machines Summary Compensation Table Year Ended December 31, 2023

The following table contains information about the compensation paid to or earned by each Officer (each a “Named Executive Officer”) with during the two most recently completed fiscal years.

________________________

Fat Shark and Rotor Riot Summary Compensation Information

Set forth below is summary compensation information similar to that set forth above, but reflecting amounts paid, payable or allocable to Fat Shark or Rotor Riot for executive officers of one or both of those entities who exceeded the enumerated threshold and which the Company anticipates hiring as an executive officer of the Company (directly or through Fat Shark or Rotor Riot) in connection with the acquisition of those entities in the Business Combination (the “Business Combination Officers”). The compensation information relates to the fiscal year end April 30, 2023 and 2022, respectively. Mr. Camden was appointed our Chief Operating Officer on March 4, 2024.

_________________

Outstanding Equity Awards at December 31, 2023

There were no outstanding equity awards held by our Named Executive Officers as of December 31, 2023.

Employment Agreements

Employment Agreement with Dr. Allan Evans, Chief Executive Officer

On November 27, 2023, the Company and Dr. Allan Evans entered into an Offer Letter (the “Offer Letter”) under which Dr. Evans serves as the Company’s Chief Executive Officer effective December 4, 2023. The Offer Letter provides that Dr. Evans receives: (i) an annual base salary of $250,000, subject to annual review; (ii) eligibility to earn an annual bonus at the sole discretion of the Company’s Board; (iii) a grant of restricted stock units (“RSUs”) equal to 5% of the outstanding common stock of the Company, vesting on the earlier of (a) a secondary offering, (b) a Change of Control event as defined in Treasury Regulation Section 1.409A-3(i)(5), or (c) the one year anniversary of the signing of the Offer Letter; and (iv) eligibility to participate in employee benefit plans and programs.

The Company and Dr. Evans are negotiating a Consulting Agreement consistent with the terms of the Offer Letter. The Consulting Agreement shall be for a term of at least two years. The Consulting Agreement will contain a non-compete provision that for a period of 12 months after Dr. Evans is no longer providing services to the Company, he will not, directly or indirectly, either as proprietor, stockholder, partner, officer, employee or otherwise, distribute, sell, offer to sell, or solicit any orders for the purchase or distribution of any products or services which are similar to those distributed, sold or provided by the Company during the 12 months preceding his termination as a consultant of the Company, to or from any person, firm or entity which was a customer of the Company during the 12 months preceding such termination of services. This section in his Consulting Agreement may not be waived by the Company without the consent of Red Cat. While the use of a Consulting Agreement rather than an Employment Agreement is subject to approval of our Board, Dr. Evans is requesting it in order to minimize his federal income tax liability since he is a resident of Puerto Rico. The primary differences will be that we will not withhold federal income taxes from Dr. Evan’s compensation but will report his compensation on Form 1099 rather than W-2. He also will not participate in our health insurance plan or receive other benefits limited to employees.

Employment Agreement with Brian Hoff, Chief Financial Officer

The Employment Agreement with Mr. Hoff effective November 1, 2022 provides that he will serve as the Chief Financial Officer of the Company on an at will basis. In August 2023, the Employment Agreement was amended (the “First Hoff Amendment”) to increase the percentage of RSUs from 1% to 3% (as discussed below). Pursuant to his Employment Agreement, Mr. Hoff receives an annual base salary of $250,000. In addition, Mr. Hoff’s Employment Agreement entitles him to the following:

Additionally, under his Employment Agreement, if Mr. Hoff is terminated by the Company without Cause or terminates his employment for Good Reason, he will be entitled to six months’ annual base salary and COBRA premiums, as well as accelerated vesting of 100% of the then unvested RSUs, if applicable.

For this purpose, Good Reason is generally defined as (i) any reduction in his base salary, (ii) any material diminution of his authorities, titles or offices, (iii) being required to report to anyone other than the Chief Executive Officer, (iv) a request by the Company to relocate, or (v) material breach of his Employment Agreement without cure after 30 days’ written notice.

Cause is generally defined as (i) failure to perform his material duties under the Employment Agreement, following 30 days’ written notice without cure, (ii) willful misconduct or gross negligence or breach of a fiduciary duty owed to the Company, (iii) conviction of our guilty pleas to a felony or other criminal offense involving moral turpitude, (iv) any act or omission involving dishonesty, disloyalty, or fraud causing or reasonably expected to cause significant economic harm to the Company, or (v) material breach of his Employment Agreement without cure after 30 days’ written notice.

Employment arrangement with Andrew Camden, Chief Operating Officer

Our Board appointed Mr. Camden, Chief Operating Officer on March 4, 2024, and agreed to pay him a salary of $150,000 per year pursuant to an oral agreement.

Non-Employee Director Compensation

Our non-employee directors did not receive any cash or equity compensation from the Company for the year ended December 31, 2023.

Following our February 2024 IPO, our Board approved compensation for our non-employee directors. Our non-employee directors will receive annual aggregate compensation of $60,000 for service on the Board which will be comprised of cash and equity grants. The terms of the equity grants have not been agreed upon. Additional compensation for the chairperson members as set forth below. All cash payments and equity grants will be made semi-annual in arrears.

All equity grants issued to our non-employee directors will be granted under our 2022 Equity Incentive Plan.

MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS

Market Information

Our common stock issued is quoted on the NYSE American under the symbol “UMAC.” On April 9, 2024, the last reported sale price of our common stock on the NYSE American was $1.82.

Stockholders

As of March 1, 2024, there were approximately 357 holders of record of our common stock. These numbers are based on the actual number of holders registered at such date and does not include holders whose shares are held in “street name” by brokers and other nominees.

Dividends

We have never paid a cash dividend on our common stock since inception. The payment of dividends may be made at the discretion of our Board, and will depend upon, but not limited to, our operations, capital requirements, and overall financial condition.

We do not anticipate paying cash dividends on our common stock in the foreseeable future. The payment of dividends on our common stock will depend on earnings, financial condition and other business and economic factors affecting it at such time as the Board may consider relevant. We intend to follow a policy of retaining all of our earnings to finance the development and execution of our strategy and the expansion of our business. If we do not pay dividends, our common stock may be less valuable because a return on your investment will occur only if our stock price appreciates.

RELATED PARTY TRANSACTIONS

The following is a description of transactions since January 1, 2020, to which we were a party or will be party, in which the amount involved exceeded or will exceed the lesser of $120,000 or 1% of the average of our total assets at year-end for the last two completed fiscal years, and any of our directors, executive officers or holders of more than 5% of our outstanding capital stock, or any immediate family member of, or person sharing the household with, any of these individuals or entities, had or will have a direct or indirect material interest. As permitted by the SEC rules, discussion of employment relationships or transactions involving the Company’s executive officers and directors, and compensation solely resulting from such employment relationships or transactions, or service as a director of the Company, as the case may be, has been omitted to the extent disclosed in the Executive Compensation or the Director Compensation section of this annual report, as applicable.

On December 8, 2023, our former Chief Executive Officer, Brandon Torres Declet, and the Company executed a termination agreement (the “Termination Agreement”) pursuant to which Mr. Declet received three months of salary severance and three months of medical and insurance premiums. In lieu of 603,208 RSUs that Mr. Declet was to be granted post IPO, Mr. Declet received 16,086 shares of our common stock in January 2024.

On September 10, 2021, our founder and former Chief Executive Officer Jeffrey Thompson subscribed for 2,400,000 shares of our common stock for a total subscription price of $24,000. Mr. Thompson subsequently subscribed for an additional 52,000 shares of our common stock on September 14, 2021 for an additional $26,000.

In November 2022, we entered into the Purchase Agreement, as amended with Red Cat and Jeffrey Thompson, the Company’s former Chief Executive Officer and President and current director, pursuant to which, among other things, Mr. Thompson and the Company have agreed to indemnification obligations, which shall survive for a period of nine months, subject to certain limitations, which includes a basket of $250,000 before any claim can be asserted and a cap equal to the value of 100,000 shares of our common stock owned by him to secure any indemnification obligations, which stock is our sole remedy, except for fraud. Mr. Torres Declet negotiated the terms of the Purchase Agreement on an arms’ length basis with Joe Freedman who was the head of Red Cat’s Special Committee. The transaction was ultimately approved by the Company’s and Red Cat’s Board. On March 8, 2023, a majority of the disinterested Red Cat shareholders approved the transactions contemplated in the Purchase Agreement in a special meeting. Mr. Thompson recused himself from such vote.

In November 2020, Red Cat acquired Fat Shark Holdings for a total purchase price of $8.4 million. In January 2020, Red Cat acquired Rotor Riot for a total purchase price of $2.0 million.

Since July 2017, Fat Shark has used Shenzhen Fatshark Co, Ltd., referred to herein as the “Supplier,” a drone manufacturing company located in Shenzhen, China, as its primary contract manufacturer for Fat Shark’s drone products. In exchange for the Supplier’s manufacturing services with respect to these products, Fat Shark pays the Supplier amounts equal to 115% of the sum of the bill of material and the labor costs for such production. Ms. Molly Mo, a majority owner of the Supplier, is the wife of Greg French, the founder of Fat Shark. Since January 1, 2020, Fat Shark has paid or accrued a total of $12,503,126 in purchase orders to the Supplier. As of December 31, 2023, Fat Shark owed the related party Supplier $66,815, which does not include unfilled purchase orders of approximately $1.29 million. The unfilled purchase orders relate to anticipated inventory purchases and the timing of fulfilling those purchase orders depends on sales and inventory levels.

PRINCIPAL STOCKHOLDERS

The following table sets forth information regarding the beneficial ownership of our common stock as of April 10, 2024 by (i) each person, entity or group (as that term is used in Section 13(d)(3) of the Exchange Act) known to the Company to be the beneficial owner of more than 5% of the outstanding common stock; (ii) each of our directors; (iii) each of our Named Executive Officers; and (iv) all executive officers and directors as a group.

Information relating to beneficial ownership of common stock by our principal stockholders and management is based upon information furnished by each person using “beneficial ownership” concepts under the rules of the SEC. Under these rules, a person is deemed to be a beneficial owner of a security if that person directly or indirectly has or shares voting power, which includes the power to vote or direct the voting of the security, or investment power, which includes the power to dispose or direct the disposition of the security. The person is also deemed to be a beneficial owner of any security of which that person has a right to acquire beneficial ownership within 60 days. Under the SEC rules, more than one person may be deemed to be a beneficial owner of the same securities, and a person may be deemed to be a beneficial owner of securities as to which he or she may not have any pecuniary interest. Except as noted below, each person has sole voting and investment power with respect to the shares beneficially owned and each stockholder's address is c/o Unusual Machines, Inc., 4677 L B McLeod Rd., Suite J, Orlando Florida, 32811.

The percentages below are calculated based on 9,333,341 shares of common stock issued and outstanding as of April 10, 2024.

DESCRIPTION OF OUR SECURITIES

 Our authorized capital stock consists of 500,000,000 shares of common stock, par value $0.01 per share, of which 3,217,255 shares are outstanding as of the date of this Prospectus, giving effect to a 1-for-2 reverse stock split, and 10,000,000 shares of “blank check” preferred stock, par value $0.01 per share, of which no shares are outstanding, other than the Series B preferred stock described below, as of the date of this Prospectus.

The following description summarizes the material terms of our securities, which does not purport to be complete and is qualified in its entirety by reference to our Amended and Restated Certificate of Incorporation, and the Certificate of Designation setting forth the terms of our Series B preferred stock, each of which are filed as an exhibit to the Registration Statement of which this Prospectus is a part, and to the applicable provisions of Puerto Rican law, including the Puerto Rico General Corporate Act.

Common Stock

The holders of our common stock are entitled to one vote for each share held of record on all matters submitted to a vote of the stockholders and do not have cumulative voting rights. Accordingly, holders of a majority of the shares of outstanding common stock entitled to vote in any election of directors may elect all of the directors standing for election, subject to any voting rights of any preferred. Subject to preferences that may be applicable to any outstanding shares of preferred stock, the holders of common stock are entitled to receive ratably such dividends as may be declared by the Board out of funds legally available therefor. Upon the liquidation, dissolution or winding up of the Company, holders of our common stock are entitled to share ratably in all assets remaining after payment of liabilities and the liquidation preferences of any outstanding shares of preferred stock. Holders of common stock have no preemptive rights and no right to convert their common stock into any other securities. Our common stock has no redemption or sinking fund provisions. The rights, preferences and privileges of the holders of the common stock are subject to, and may be adversely affected by, the rights of the holders of shares of any series of our preferred stock that the Board may designate and issue in the future. All outstanding shares of common stock are fully paid and non-assessable.

“Blank Check” Preferred Stock

Pursuant to our Articles of Incorporation, our Board has the authority, without further action by the stockholders, to issue up to 10,000,000 shares of preferred stock, in one or more series. Our Articles of Incorporation provide that our Board has the authority, without further action by the shareholders, to designate and issue shares of preferred stock in one or more series and to fix the rights, preferences, privileges and restrictions granted to or imposed upon the preferred stock. Preferred stock may be designated and issued without authorization of shareholders unless such authorization is required by applicable law, the rules of the principal market or other securities exchange on which our stock is then listed or admitted to trading.

Our Board may authorize the issuance of preferred stock with voting or conversion rights that could adversely affect the voting power or other rights of the holders of common stock. The issuance of preferred stock, while providing flexibility in connection with possible acquisitions and other corporate purposes could, under some circumstances, have the effect of delaying, deferring or preventing a change in control of the Company. 

Series B Convertible Preferred Stock

We have 70 outstanding shares of Series B as of the date of this Prospectus. Each share of Series B is convertible into 5,000 shares of our common stock at the election of the holder, subject to a 4.99% beneficial ownership limitation which may be increased to up to 9.99% upon 61 days’ written notice from the holder. The Series B is non-voting and has no other special rights other than the conversion feature.

Anti-Takeover Effects of Provisions of our Certificate of Incorporation, our Bylaws and Puerto Rico Law

Certain provisions in our Amended and Restated Certificate of Incorporation and Bylaws summarized below may be deemed to have an anti-takeover effect and may delay, deter or prevent a tender offer or takeover attempt that a stockholder might consider to be in its best interests, including attempts that might result in a premium being paid over the market price for the shares held by stockholders.

Advance Notice Requirements for Stockholder Proposals and Director Nominations.

Our Bylaws will provide that stockholders seeking to bring business before an annual meeting of stockholders, or to nominate candidates for election as directors at an annual meeting of stockholders, must provide timely notice thereof in writing. To be timely, a stockholder’s notice generally must be delivered to and received at our principal executive offices not less than 90 days nor more than 120 days prior to the first anniversary of the preceding year’s annual meeting; provided, that, in the event that the date of such meeting is advanced more than 30 days prior to, or delayed by more than 60 days after, the anniversary of the preceding year’s annual meeting of our stockholders, a stockholder’s notice to be timely must be so delivered not earlier than the close of business on the 120th day prior to such meeting and not later than the close of business on the later of the 90th day prior to such meeting or the 10th day following the day on which public announcement of the date of such meeting is first made. Our Bylaws also will specify certain requirements as to the form and content of a stockholder’s notice. These provisions may preclude stockholders from bringing matters before an annual meeting of stockholders or from making nominations for directors at an annual meeting of stockholders.

Special Meeting Limitations

Under our Bylaws, special meetings of the stockholders may be called only by (i) our Board, or (ii) a holder of at least 20% of the shares entitled to vote at the meeting.

Jurisdiction and Venue

Section 7(a) of our Certificate of Incorporation provides that lawsuits involving the Company and its internal affairs, including derivative actions brought on behalf of the Company by its stockholders under Puerto Rican corporate law, be governed by the laws of Puerto Rico and providing that resulting proceedings be heard exclusively in commonwealth courts located within Puerto Rico, which may make actions against or on behalf of the Company more difficult to litigate by stockholders. Similarly, Section 7(b) of our Certificate of Incorporation provide the United States federal courts with exclusive jurisdiction over claims brought under the Securities Act. The effect of this provision is that an action under the Securities Act with respect to the Company may only be brought in the federal courts, whereas absent such provision the federal and commonwealth or state courts would otherwise have concurrent jurisdiction over such a matter. Further, Section 7(c) provides for the United States District Court for the District of Puerto Rico as the exclusive venue for any cause of action under either the Securities Act or the Exchange Act, meaning such federal court is the only court in which such a case may be brought and heard.

These provisions, together with provisions of the Puerto Rico General Corporations Act, could have the effect of delaying, deferring or preventing an attempted takeover or change of control of the Company, or making such an attempt more difficult. Additionally, while the Delaware Supreme Court has upheld a similar provision, in most jurisdictions including in Puerto Rico it remains unclear how a court would interpret and whether it would enforce some of these provisions, resulting in added uncertainty. See the Risk Factor titled “Our Certificate of Incorporation contains certain provisions which may result in difficulty in bringing stockholder actions against or on behalf of the Company or its affiliates” on page 34 for more information. Section 22 of the Securities Act creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder. Investors cannot waive compliance with the federal securities laws and the rules and regulations thereunder, and that there is uncertainty as to whether a state or federal court would enforce these charter provisions.

Transfer Agent and Registrar

The transfer agent and registrar for our common stock is Equity Stock Transfer whose address is 237 West 37th Street, Suite 602, New York, New York 10018, and whose telephone number is (212) 575-5757.

LEGAL MATTERS

The validity of the securities being offered by this Prospectus will be passed upon for us by Nason, Yeager, Gerson, Harris & Fumero, P.A.

EXPERTS

The consolidated financial statements of the Company as of December 31, 2023 and 2022, and as of April 30, 2023 and 2022 for Fat Shark and Rotor Riot, and for the years then ended, included in this Prospectus have been so included in reliance on the report of BF Borgers, CPA, PC an independent registered public accounting firm, which includes an explanatory paragraph about the Company’s ability to continue as a going concern, given on the authority of said firm as experts in auditing and accounting.

WHERE YOU CAN FIND MORE INFORMATION

We have filed with the SEC this registration statement on Form S-1 under the Securities Act with respect to the shares of common stock being offered by this Prospectus. This Prospectus, which constitutes a part of this registration statement, does not contain all of the information in this registration statement and its exhibits. For further information with respect to us and the common stock offered by this Prospectus, you should refer to this registration statement and the exhibits filed as part of that document. Statements contained in this Prospectus as to the contents of any contract or any other document referred to are not necessarily complete, and in each instance, we refer you to the copy of the contract or other document filed as an exhibit to this registration statement. Each of these statements is qualified in all respects by this reference.

With the completion of the IPO, we are now subject to the informational requirements of the Exchange Act and will file annual, quarterly and current reports, proxy statements and other information with the SEC. You can read our SEC filings, including the registration statement, at the SEC’s website at www.sec.gov. We also maintain a website at https://unusualmachines.com/investors and you may access, free of charge, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports, as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC. The information contained on, or that can be accessed through, our website is not a part of this prospectus. You may also request a copy of these filings, at no cost, by writing or telephoning us at: Unusual Machines, Inc., 4677 LB McLeod Rd., Suite J, Orlando, FL 32811 or contacting us at +1 855-921-4600.

UNUSUAL MACHINES, INC.

INDEX TO FINANCIAL STATEMENTS

UNAUDITED PRO FORMA

CONDENSED COMBINED FINANCIAL STATEMENTS

The pro forma adjustments related to the Share Purchase Agreement and Initial Public Offering are described in the notes to the unaudited pro forma combined financial information and principally include the following:

The adjustments to fair value and the other estimates reflected in the accompanying unaudited pro forma condensed consolidated financial statements may be materially different from those reflected in the combined company’s consolidated financial statements subsequent to the Share Purchase. In addition, the unaudited pro forma condensed combined financial statements do not purport to project the future financial position or results of operations of the combined companies. Reclassifications and adjustments may be required if changes to Fat Shark’s and Rotor Riot’s financial presentation are needed to conform Fat Shark’s and Rotor Riot’s accounting policies to the accounting policies of Unusual Machines, Inc.

These unaudited pro forma condensed combined financial statements do not give effect to any anticipated synergies, operating efficiencies or cost savings that may be associated with the Share Purchase Agreement or Initial Public Offering. These financial statements also do not include any integration costs the companies may incur related to the transactions as part of combining the operations of the companies.

UNAUDITED PRO FORMA CONDENSED COMBINED BALANCE SHEET