Kaiser Aluminum 10Q 2020 Q1 Quarterly report

Kaiser Aluminum (KALU) 10-Q2020 Q1 Quarterly report

Content analysis

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q



☒	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended March 31, 2020



☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _________________________________ to _________________________________

Commission File Number: 1-09447

KAISER ALUMINUM CORPORATION

(Exact name of registrant as specified in its charter)



Delaware				94-3030279
(State of incorporation)				(I.R.S. Employer Identification No.)

27422 Portola Parkway, Suite 200

Foothill Ranch, California 92610-2831

(Address of principal executive offices) (Zip Code)

(949) 614-1740

(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:



Title of each class	Trading symbol	Name of each exchange on which registered
Common stock, par value $0.01 per share	KALU	Nasdaq Global Select Market

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of "large accelerated filer," "accelerated filer," "smaller reporting company" and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one):



Large accelerated filer	☒	Accelerated filer	☐

Non-accelerated filer	☐ (Do not check if a smaller reporting company)	Smaller reporting company	☐

		Emerging growth company	☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

As of April 13, 2020, there were 15,789,594 shares of common stock of the registrant outstanding.

TABLE OF CONTENTS

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

PART I – FINANCIAL INFORMATION

Item 1. Financial Statements

CONSOLIDATED BALANCE SHEETS (UNAUDITED)



	March 31, 2020			December 31, 2019
	(In millions of dollars, except share and per share amounts)
ASSETS
Current assets:
Cash and cash equivalents	$	307.2		$	264.3
Short-term investments	39.3			78.7
Receivables:
Trade receivables, net	175.2			167.1
Other	22.6			18.1
Contract assets	47.1			54.6
Inventories	194.6			177.6
Prepaid expenses and other current assets	20.4			19.4
Total current assets	806.4			779.8
Property, plant and equipment, net	630.9			622.0
Operating lease assets	28.8			25.8
Deferred tax assets, net	2.0			11.8
Intangible assets, net	28.9			29.6
Goodwill	18.8			18.8
Other assets	37.3			38.4
Total	$	1,553.1		$	1,526.2
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
Accounts payable	$	113.9		$	92.0
Accrued salaries, wages and related expenses	28.3			34.4
Other accrued liabilities	56.9			44.0
Total current liabilities	199.1			170.4
Long-term portion of operating lease liabilities	27.8			25.2
Net liabilities of Salaried VEBA	32.5			32.6
Deferred tax liabilities	4.5			4.5
Long-term liabilities	75.3			67.0
Long-term debt	492.8			492.6
Total liabilities	832.0			792.3
Commitments and contingencies – Note 7
Stockholders' equity:
Preferred stock, 5,000,000 shares authorized at both March 31, 2020 and December 31, 2019; no shares were issued and outstanding at March 31, 2020 and December 31, 2019	—			—
Common stock, par value $0.01, 90,000,000 shares authorized at both March 31, 2020 and at December 31, 2019; 22,624,880 shares issued and 15,789,594 shares outstanding at March 31, 2020; 22,550,827 shares issued and 15,868,304 shares outstanding at December 31, 2019	0.2			0.2
Additional paid in capital	1,060.3			1,062.9
Retained earnings	190.6			172.8
Treasury stock, at cost, 6,835,286 shares at March 31, 2020 and 6,682,523 shares at December 31, 2019, respectively	(475.9		)	(463.4		)
Accumulated other comprehensive loss	(54.1		)	(38.6		)
Total stockholders' equity	721.1			733.9
Total	$	1,553.1		$	1,526.2

The accompanying notes to interim consolidated financial statements are an integral part of these statements.

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

STATEMENTS OF CONSOLIDATED INCOME (UNAUDITED)



	Quarter Ended
	March 31,
	2020			2019
	(In millions of dollars, except share and per share amounts)
Net sales	$	369.3		$	395.2
Costs and expenses:
Cost of products sold, excluding depreciation and amortization and other items	286.6			315.1
Depreciation and amortization	13.2			11.9
Selling, general, administrative, research and development	23.9			25.2
Total costs and expenses	323.7			352.2
Operating income	45.6			43.0
Other (expense) income:
Interest expense	(6.1		)	(5.7		)
Other (expense) income, net – Note 9	(0.8		)	0.5
Income before income taxes	38.7			37.8
Income tax provision	(9.6		)	(9.8		)
Net income	$	29.1		$	28.0

Net income per common share:
Basic	$	1.83		$	1.74
Diluted	$	1.81		$	1.71
Weighted-average number of common shares outstanding (in thousands):
Basic	15,838			16,108
Diluted	16,008			16,372

The accompanying notes to interim consolidated financial statements are an integral part of these statements.

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

STATEMENTS OF CONSOLIDATED COMPREHENSIVE INCOME (UNAUDITED)



	Quarter Ended
	March 31,
	2020			2019
	(In millions of dollars)
Net income	$	29.1		$	28.0
Other comprehensive (loss) income, net of tax – Note 8:
Defined benefit pension plan and Salaried VEBA	1.1			1.1
Available for sale securities	(0.2		)	(0.2		)
Cash flow hedges	(15.9		)	8.8
Fair value hedges	(0.5		)	—
Other comprehensive (loss) income, net of tax	(15.5		)	9.7
Comprehensive income	$	13.6		$	37.7

The accompanying notes to interim consolidated financial statements are an integral part of these statements.

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

STATEMENTS OF CONSOLIDATED STOCKHOLDERS' EQUITY (UNAUDITED)

Quarter Ended March 31, 2020



	Common Shares Outstanding		Common Stock		Additional Paid in Capital			Retained Earnings			Treasury Stock			Accumulated Other Comprehensive Loss			Total
	(In millions of dollars, except share and per share amounts)
BALANCE, December 31, 2019	15,868,304		$	0.2	$	1,062.9		$	172.8		$	(463.4	)	$	(38.6	)	$	733.9
Net income	—		—		—			29.1			—			—			29.1
Other comprehensive loss, net of tax	—		—		—			—			—			(15.5		)	(15.5		)
Common shares issued (including impacts from Long-Term Incentive programs)¹	119,598		—		—			—			—			—			—
Cancellation of shares to cover employees' tax withholdings upon vesting of non-vested shares	(45,545	)	—		(4.3		)	—			—			—			(4.3		)
Repurchase of common stock²	(152,763	)	—		—			—			(12.5		)	—			(12.5		)
Cash dividends declared³	—		—		—			(11.3		)	—			—			(11.3		)
Amortization of unearned equity compensation	—		—		1.7			—			—			—			1.7
BALANCE, March 31, 2020	15,789,594		$	0.2	$	1,060.3		$	190.6		$	(475.9	)	$	(54.1	)	$	721.1

____________________


¹	At March 31, 2020, 380,201 shares were available for awards under the Kaiser Aluminum Corporation 2016 Equity and Incentive Compensation Plan ("2016 Plan").


²	Weighted-average repurchase price (dollars per share) for the quarter ended March 31, 2020 was $81.94. At March 31, 2020, $93.1 million remained available to repurchase our common shares pursuant to the stock repurchase program.


³	Dividends declared per common share was $0.67 for the quarter ended March 31, 2020.

The accompanying notes to interim consolidated financial statements are an integral part of these statements.

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

STATEMENTS OF CONSOLIDATED STOCKHOLDERS' EQUITY CONTINUED (UNAUDITED)

Quarter Ended March 31, 2019



	Common Shares Outstanding		Common Stock		Additional Paid in Capital			Retained Earnings			Treasury Stock			Accumulated Other Comprehensive Loss			Total
	(In millions of dollars, except share and per share amounts)
BALANCE, December 31, 2018	16,234,603		$	0.2	$	1,059.3		$	150.2		$	(420.5	)	$	(48.8	)	$	740.4
Net income	—		—		—			28.0			—			—			28.0
Other comprehensive income, net of tax	—		—		—			—			—			9.7			9.7
Common shares issued (including impacts from Long-Term Incentive programs)	122,309		—		—			—			—			—			—
Cancellation of shares to cover employees' tax withholdings upon vesting of non-vested shares	(46,388	)	—		(5.0		)	—			—			—			(5.0		)
Repurchase of common stock¹	(175,977	)	—		—			—			(17.4		)	—			(17.4		)
Cash dividends declared²	—		—		—			(10.2		)	—			—			(10.2		)
Amortization of unearned equity compensation	—		—		2.4			—			—			—			2.4
BALANCE, March 31, 2019	16,134,547		$	0.2	$	1,056.7		$	168.0		$	(437.9	)	$	(39.1	)	$	747.9

____________________


¹	Weighted-average repurchase price (dollars per share) for the quarter ended March 31, 2019 was $98.55.


²	Dividends declared per common share were $0.60 for the quarter ended March 31, 2019.

The accompanying notes to interim consolidated financial statements are an integral part of these statements.

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

STATEMENTS OF CONSOLIDATED CASH FLOWS (UNAUDITED)



	Quarter Ended
	March 31,
	2020			2019
	(In millions of dollars)
Cash flows from operating activities¹:
Net income	$	29.1		$	28.0
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation of property, plant and equipment	12.5			11.2
Amortization of definite-lived intangible assets	0.7			0.7
Amortization of debt discount and debt issuance costs	0.3			0.3
Deferred income taxes	14.8			10.4
Non-cash equity compensation	1.7			2.4
Gain on disposition of short-term investments	(0.5		)	(0.3		)
Loss on disposition of property, plant and equipment	0.2			—
Other non-cash changes in assets and liabilities	1.8			3.6
Changes in operating assets and liabilities:
Trade and other receivables	(12.6		)	(12.8		)
Contract assets	7.5			(3.5		)
Inventories	(17.0		)	(18.8		)
Prepaid expenses and other current assets	(2.8		)	(3.4		)
Accounts payable	21.7			7.4
Accrued liabilities	(2.3		)	(0.4		)
Annual variable cash contributions to Salaried VEBA	(2.9		)	(2.1		)
Long-term assets and liabilities, net	0.2			0.1
Net cash provided by operating activities	52.4			22.8
Cash flows from investing activities¹:
Capital expenditures	(21.1		)	(13.6		)
Purchase of short-term investments	(39.1		)	(18.1		)
Proceeds from disposition of short-term investments	78.8			32.7
Net cash provided by investing activities	18.6			1.0
Cash flows from financing activities¹:
Repayment of finance lease	(0.4		)	(0.3		)
Cancellation of shares to cover employees' tax withholdings upon vesting of non-vested shares	(4.3		)	(5.0		)
Repurchase of common stock	(12.5		)	(18.5		)
Cash dividends and dividend equivalents paid	(11.3		)	(10.2		)
Net cash used in financing activities	(28.5		)	(34.0		)
Net increase (decrease) in cash, cash equivalents and restricted cash during the period	42.5			(10.2		)
Cash, cash equivalents and restricted cash at beginning of period	278.6			139.6
Cash, cash equivalents and restricted cash at end of period	$	321.1		$	129.4

____________________


¹	See Note 12 for supplemental cash flow information.

The accompanying notes to interim consolidated financial statements are an integral part of these statements.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

NOTES INDEX



Note		Page
Note 1	Basis of Presentation and Recent Accounting Pronouncements	8
Note 2	Supplemental Balance Sheet Information	9
Note 3	Leases	10
Note 4	Employee Benefits	12
Note 5	Derivatives, Hedging Programs and Other Financial Instruments	13
Note 6	Debt and Credit Facility	18
Note 7	Commitments and Contingencies	19
Note 8	Accumulated Other Comprehensive Loss	20
Note 9	Other (Expense) Income, Net	22
Note 10	Income Tax Matters	22
Note 11	Net Income Per Share	22
Note 12	Supplemental Cash Flow Information	23
Note 13	Business, Product and Geographical Area Information	24
Note 14	Subsequent Events	24

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

1. Basis of Presentation and Recent Accounting Pronouncements

This Quarterly Report on Form 10-Q (this "Report") should be read in conjunction with the Company's Annual Report on Form 10-K for the year ended December 31, 2019. Unless the context otherwise requires, references in these notes to interim consolidated financial statements - unaudited to "Kaiser Aluminum Corporation," "we," "us," "our," "the Company" and "our Company" refer collectively to Kaiser Aluminum Corporation and its subsidiaries.

Principles of Consolidation and Basis of Presentation. The accompanying unaudited consolidated financial statements include the accounts of our wholly owned subsidiaries and are prepared in accordance with United States generally accepted accounting principles ("GAAP") and the rules and regulations of the Securities and Exchange Commission ("SEC") applicable for interim periods and, therefore, do not include all information and footnotes required by GAAP for complete financial statements. In management's opinion, all adjustments (which include normal recurring adjustments) considered necessary for a fair presentation have been included. The results of operations for our interim periods are not necessarily indicative of the results of operations that may be achieved for the entire 2020 fiscal year. The financial information as of December 31, 2019 is derived from our audited consolidated financial statements and footnotes included in our Annual Report on Form 10-K for the year ended December 31, 2019.

Use of Estimates in the Preparation of Financial Statements. The preparation of financial statements in accordance with GAAP requires the use of estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities known to exist as of the date the financial statements are published and the reported amounts of revenues and expenses during the reporting period. Uncertainties with respect to such estimates and assumptions are inherent in the preparation of our consolidated financial statements; accordingly, it is possible that the actual results could differ from these estimates and assumptions, which could have a material effect on the reported amounts of our consolidated financial position and results of operations.

Adoption of New Accounting Pronouncements

Accounting Standards Update ("ASU") No. 2016-13, Financial Instruments - Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments ("ASU 2016-13"), was issued in June 2016. Under ASU 2016-13, existing guidance on reporting credit losses for trade and other receivables and available for sale debt securities have been replaced with a new forward-looking "expected loss" model that has resulted in the earlier recognition of allowances for losses. Our adoption of ASU 2016-13 during the quarter ended March 31, 2020 using the modified retrospective transition approach did not result in a material impact on our consolidated financial statements. As part of our assessment of the adequacy of our allowances for credit losses, we consider a number of factors including, but not limited to, customer credit ratings, bankruptcy filings, published or estimated credit default rates, age of receivables, expected loss rates and collateral exposures.

ASU No. 2018-15, Intangibles - Goodwill and Other - Internal-Use Software (Subtopic 350-40): Customer's Accounting for Implementation Costs Incurred in a Cloud Computing Arrangement That Is a Service Contract ("ASU 2018-15"), was issued in August 2018. Under ASU 2018-15, requirements for capitalizing implementation costs incurred in a hosting arrangement (cloud computing) that is a service contract are to be aligned with the requirements for capitalizing implementation costs incurred to develop or obtain internal-use software. Our adoption of ASU 2018-15 during the quarter ended March 31, 2020 using the prospective transition approach did not result in a material impact on our consolidated financial statements.

Accounting Pronouncements Issued But Not Yet Adopted

ASU No. 2019-12, Simplifying the Accounting for Income Taxes ("ASU 2019-12"), was issued in December 2019. Under ASU 2019-12, the accounting for income taxes is simplified by eliminating certain exceptions and implementing additional requirements which result in a more consistent application of ASC 740 Income Taxes. We are currently in the process of evaluating the impact of adopting ASU 2019-12 in 2021, but do not expect it to have a material impact on our consolidated financial statements.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

2. Supplemental Balance Sheet Information



	March 31, 2020			December 31, 2019
	(In millions of dollars)
Cash and Cash Equivalents
Cash and money market funds	$	199.6		$	28.2
Commercial paper	107.6			236.1
Total	$	307.2		$	264.3

Trade Receivables, Net
Billed trade receivables	$	176.6		$	168.5
Allowance for doubtful receivables	(1.4		)	(1.4		)
Trade receivables, net	$	175.2		$	167.1

Inventories¹
Finished products	$	43.1		$	42.6
Work-in-process	89.8			63.5
Raw materials	55.2			65.0
Operating supplies	6.5			6.5
Total	$	194.6		$	177.6

Property, Plant and Equipment, Net
Land and improvements	$	20.8		$	21.4
Buildings and leasehold improvements	106.8			104.5
Machinery and equipment	821.0			813.5
Construction in progress	44.0			33.2
Property, plant and equipment, gross	992.6			972.6
Accumulated depreciation	(364.0		)	(352.2		)
Assets held for sale	2.3			1.6
Property, plant and equipment, net	$	630.9		$	622.0

Other Accrued Liabilities
Uncleared cash disbursements	$	5.7		$	4.2
Accrued income taxes and taxes payable	10.3			6.2
Accrued annual contribution to Salaried VEBA	—			2.9
Accrued interest	2.0			2.3
Short-term environmental accrual – Note 7	4.7			5.5
Other – Note 3 and Note 5	34.2			22.9
Total	$	56.9		$	44.0

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED



	March 31, 2020		December 31, 2019
	(In millions of dollars)
Long-Term Liabilities
Workers' compensation accrual²	$	28.5	$	27.7
Long-term environmental accrual – Note 7	12.3		11.5
Other long-term liabilities	34.5		27.8
Total	$	75.3	$	67.0

____________________


¹	At March 31, 2020 and December 31, 2019, the current cost of our inventory exceeded its stated LIFO value by $1.9 million and $11.9 million, respectively.


²	Our workers' compensation accrual was estimated using a discount rate of 1.00% and 1.75% at March 31, 2020 and December 31, 2019, respectively. The undiscounted workers' compensation liabilities were estimated at $29.0 million and $29.2 million as of March 31, 2020 and December 31, 2019, respectively.

3. Leases

We determine whether an agreement is a lease at inception. We have operating and finance leases for equipment and real estate that primarily have fixed lease payments. Our leases have remaining lease terms of approximately one to 13 years, some of which may include options to extend the lease for up to 20 years, and some of which may include options to terminate the lease within one year. None of our options to extend or terminate are reasonably certain of being exercised, and are therefore not included in our determination of lease assets and liabilities. Short-term leases with an initial term of 12 months or less are not recorded on our Consolidated Balance Sheets.

As most of our leases do not provide an implicit rate, we use information available at the lease commencement date in determining an incremental borrowing rate when calculating our operating lease assets and operating lease liabilities. In determining the inputs to the incremental borrowing rate calculation, we make judgments about the value of the leased asset, our credit rating and the lease term, including the probability of our exercising options to extend or terminate the underlying lease. Additionally, we make judgments around contractual asset substitution rights in determining whether a contract contains a lease.

We have lease agreements with lease and non-lease components, which are generally accounted for separately. These non-lease components include items such as common area maintenance, taxes and insurance for our real estate leases, as well as maintenance charges related to our equipment leases. We have, however, applied the practical expedient within ASU 2016-02 to not separate lease and non-lease components to our embedded supply system equipment leases and have therefore accounted for both lease and non-lease components in determining the lease assets and liabilities.

Many of our equipment leases contain clauses that require us to return the equipment with certain functionality intact. We account for these costs as residual value guarantees when the guarantee becomes probable of being owed. Our lease agreements do not contain any material restrictive covenants.

The following table presents lease terms and discount rates as of March 31, 2020:

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

The following table summarizes the classification of lease assets and lease liabilities on our Consolidated Balance Sheet as of the periods presented (in millions of dollars):



Leases	Classification	March 31, 2020		December 31, 2019
Assets
Operating lease assets	Operating lease assets	$	28.8	$	25.8
Finance lease assets	Property, plant and equipment, net	6.3		6.6
Total lease assets		$	35.1	$	32.4

Liabilities
Current:
Operating lease liabilities	Other accrued liabilities	$	4.5	$	3.9
Finance lease liabilities	Other accrued liabilities	1.2		1.2
Non-current:
Operating lease liabilities	Long-term portion of operating lease liabilities	27.8		25.2
Finance lease liabilities	Long-term liabilities	5.1		5.4
Total lease liabilities		$	38.6	$	35.7

The following table summarizes the components of lease cost on our Statements of Consolidated Income for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
Lease Cost	2020		2019
Operating lease cost	$	1.8	$	2.0
Short-term lease cost	0.3		0.3
Finance lease cost:
Amortization of leased assets	0.4		0.4
Interest on lease liabilities	0.1		0.1
Total lease cost	$	2.6	$	2.8

The following table presents the maturity of our lease liabilities as of March 31, 2020 (in millions of dollars):



Maturity of Lease Liabilities	Finance Leases			Operating Leases
Remainder of 2020	$	1.2		$	4.7
2021	1.4			5.5
2022	1.3			4.7
2023	1.2			4.3
2024	0.6			4.1
2025	0.6			2.2
2026 and thereafter	0.7			16.9
Total minimum lease payments	$	7.0		$	42.4

Less: interest	(0.7		)	(10.1		)
Present value	$	6.3		$	32.3

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

4. Employee Benefits

Short-Term Incentive Plans ("STI Plans"). We have annual short-term incentive compensation plans for senior management and certain other employees payable at our election in cash, shares of common stock or a combination of cash and shares of common stock. Amounts earned under STI Plans are based on our adjusted earnings before interest, taxes, depreciation and amortization ("Adjusted EBITDA"), modified for certain safety, quality, delivery, cost and individual performance factors. The Adjusted EBITDA targets are determined based on the return on adjusted net assets. Most of our production facilities have similar programs for both hourly and salaried employees. As of March 31, 2020, we had a liability of $3.7 million recorded within Accrued salaries, wages and related expenses for estimated probable future payments relating to the three month performance period of our 2020 STI Plan.

Pension and Similar Benefit Plans. We provide contributions to: (i) defined contribution 401(k) savings plans for salaried employees and certain hourly employees; (ii) a non-qualified, unfunded, unsecured plan of deferred compensation (see "Deferred Compensation Plan" below); (iii) multi-employer pension plans sponsored by the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union, AFL-CIO, CLC, the International Association of Machinists and certain other unions at certain of our production facilities; and (iv) a defined benefit pension plan for salaried employees at our London, Ontario (Canada) facility.

Deferred Compensation Plan. We have a non-qualified, unfunded, unsecured plan of deferred compensation for certain employees who would otherwise suffer a loss of benefits under our defined contribution plan as a result of the limitations imposed by the Internal Revenue Code of 1986. Despite the plan being an unfunded plan, we make an annual contribution to a rabbi trust to fulfill future funding obligations as contemplated by the terms of the plan. The assets in the trust are held in various investment funds at certain registered investment companies and are accounted for as equity investments with changes in fair value recorded within Other (expense) income, net (see Note 9). Assets of our deferred compensation plan are included in Other assets, classified within Level 2 of the fair value hierarchy and are measured and recorded at fair value based on their quoted market prices. The fair value of these assets at March 31, 2020 and December 31, 2019 was $7.6 million and $8.1 million, respectively. Offsetting liabilities relating to the deferred compensation plan are included in Other accrued liabilities and Long-term liabilities.

Salaried VEBA Postretirement Obligation. Certain retirees who retired prior to 2004 and certain employees who were hired prior to February 2002 and have subsequently retired or will retire with the requisite age and service, along with their surviving spouses and eligible dependents, are eligible to participate in a voluntary employees' beneficiary association ("VEBA") that provides healthcare cost, medical cost and long-term care insurance cost reimbursement benefits ("Salaried VEBA"). We have an ongoing obligation with no express termination date to make annual variable cash contributions up to a maximum of $2.9 million to the Salaried VEBA. We paid $2.9 million with respect to 2019 during the quarter ended March 31, 2020. We account for the Salaried VEBA as a defined benefit plan in our financial statements.

The following table presents the total (benefit) expense related to all postretirement benefit plans for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020			2019
Defined contribution plans¹	$	3.9		$	3.9
Deferred compensation plan¹	(0.4		)	0.7
Multiemployer pension plans¹	1.3			1.2
Net periodic postretirement benefit cost relating to Salaried VEBA²	1.2			1.7
Total	$	6.0		$	7.5

____________________


¹	Substantially all of the expense related to employee benefits are in Cost of products sold, excluding depreciation and amortization and other items ("COGS") with the remaining balance in Selling, general, administrative, research and development ("SG&A and R&D").


²	The current service cost component of Net periodic postretirement benefit cost relating to Salaried VEBA is included within our Statements of Consolidated Income in SG&A and R&D for all periods presented. All other components of Net

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

periodic postretirement benefit cost relating to Salaried VEBA are included within Other (expense) income, net, on our Statements of Consolidated Income.

Components of Net Periodic Benefit Cost. Our results of operations included the following impacts associated with our Canadian pension plan and the Salaried VEBA: (i) a charge for service rendered by employees; (ii) a charge for accretion of interest; (iii) a benefit for the expected return on plan assets; (iv) amortization of prior service costs associated with plan amendments; and (v) amortization of net actuarial differences. Net periodic benefit cost related to our Canadian pension plan was not material for the quarters ended March 31, 2020 and March 31, 2019.

The following table presents the components of Net periodic postretirement benefit cost relating to Salaried VEBA for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020			2019
Salaried VEBA¹:
Interest cost	$	0.6		$	0.8
Expected return on plan assets	(0.7		)	(0.6		)
Amortization of prior service cost²	1.2			1.4
Amortization of net actuarial loss	0.1			0.1
Total net periodic postretirement benefit cost relating to Salaried VEBA	$	1.2		$	1.7

____________________


¹	The service cost was insignificant for all periods presented.


²	We amortize prior service cost on a straight-line basis over the average remaining years of service to full eligibility for benefits of the active plan participants.

5. Derivatives, Hedging Programs and Other Financial Instruments

Overview. In conducting our business, we enter into derivative transactions, including forward contracts and options, to limit our exposure to: (i) metal price risk related to our sale of fabricated aluminum products and the purchase of metal used as raw material for our fabrication operations; (ii) energy price risk relating to fluctuating prices of natural gas and electricity used in our production processes; and (iii) foreign currency requirements with respect to cash commitments for equipment purchases denominated in foreign currency. We do not use derivative financial instruments for trading or other speculative purposes. Hedging transactions are executed centrally on behalf of all of our operations to minimize transaction costs, monitor consolidated net exposures and allow for increased responsiveness to changes in market factors.

Our derivative activities are overseen by a committee ("Hedging Committee"), which is composed of our chief executive officer, chief operating officer, chief financial officer, chief accounting officer, vice president of metal management, treasurer and other officers and employees selected by the chief executive officer. The Hedging Committee meets regularly to review commodity price exposure, derivative positions and strategy. Management reviews the scope of the Hedging Committee's activities with our Board of Directors.

We are exposed to counterparty credit risk on all of our derivative instruments, which we manage by monitoring the credit quality of our counterparties and allocating our hedging positions among multiple counterparties to limit exposure to any single entity. Our counterparties are major, investment grade financial institutions or trading companies. Hedging transactions are governed by negotiated reciprocal credit lines, which generally require collateral to be posted above specified credit thresholds. We believe the risk of loss is remote and contained due to counterparty credit quality, our diversification practice and collateral requirements.

In a majority of our hedging counterparty agreements, our counterparty offers us a credit line that adjusts up or down, depending on our liquidity. Below specified liquidity thresholds, we may have to post collateral if the fair value of our net liability with such counterparty exceeds our reduced credit line. We manage this risk by allocating hedging transactions among multiple counterparties, using options as part of our hedging activities or both. The aggregate fair value of our derivative

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

instruments that were in a net liability position was $29.2 million and $7.2 million at March 31, 2020 and December 31, 2019, respectively, and we had 0 collateral posted as of those dates.

Additionally, our firm-price customer sales commitments create incremental customer credit risk related to metal price movements. Under certain circumstances, we mitigate this risk by periodically requiring cash collateral from them, which we classify as deferred revenue and include as a component of Other accrued liabilities. Cash collateral posted from our customers was $2.1 million at March 31, 2020 and $0.2 million at December 31, 2019.

Cash Flow Hedges

We designate our aluminum and energy derivatives and our forward swap contracts for zinc and copper ("Alloying Metals") used in our fabrication operations as cash flow hedges. Unrealized gains and losses associated with our cash flow hedges are deferred in Other comprehensive (loss) income, net of tax, and reclassified to COGS when such hedges settle. See Note 8 for the total amount of gain or loss on derivative instruments designated and qualifying as cash flow hedging instruments and fair value hedging instruments that was reported in Accumulated other comprehensive loss ("AOCI"), as well as the related reclassifications into earnings and tax effects. Cumulative gains and losses related to cash flow hedges are reclassified out of AOCI and recorded within COGS when the associated hedged commodity purchases impact earnings.

Aluminum Hedges. Our pricing of fabricated aluminum products is generally intended to lock in a conversion margin (representing the value added from the fabrication process(es)) and to pass through metal price fluctuations to our customers. For some of our higher value added products sold on a spot basis, the pass through of metal price movements can sometimes lag by as much as several months, with a favorable impact to us when metal prices decline and an adverse impact to us when metal prices increase. Additionally, in certain instances, we enter into firm-price arrangements with our customers for stipulated volumes to be delivered in the future. Because we generally purchase primary and secondary aluminum on a floating price basis, the lag in passing through metal price movements to customers on some of our higher value added products sold on a spot basis and the volume that we have committed to sell to our customers under a firm-price arrangement create metal price risk for us. We use third-party hedging instruments to limit exposure to metal price risk related to the metal pass through lag on some of our products and firm-price customer sales contracts.

Alloying Metals Hedges. We are exposed to risk of fluctuating prices for Alloying Metals used as raw materials in our fabrication operations. We, from time to time, in the ordinary course of business, use third-party hedging instruments to mitigate our risk from price fluctuations in Alloying Metals.

Energy Hedges. We are exposed to risk of fluctuating prices for natural gas and electricity. We, from time to time, in the ordinary course of business, enter into hedging transactions and/or physical delivery commitments with third parties to mitigate our risk from fluctuations in natural gas and electricity prices.

Fair Value Hedges

We are exposed to foreign currency exchange risk related to firm-price commitments for equipment purchases from foreign manufacturers. We, from time to time, in the ordinary course of business, use third-party hedging instruments to mitigate our exposure to currency exchange rate fluctuations on these purchases, and designate such hedging instruments as fair value hedges. Gain or loss related to components excluded from the assessment of effectiveness from these fair value hedges is first recognized in AOCI and subsequently reclassified to Depreciation and amortization on a straight-line basis over the term of the hedge. Gain or loss on the hedged item (e.g., equipment purchase firm commitments) and the remaining gain or loss on the fair value hedge is recorded within Depreciation and amortization in the period that the gain or loss occurs. Any difference between the change in the fair value of the excluded component and amounts recognized in income under that systematic and rational method is recognized in AOCI.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

Notional Amount of Derivative Contracts

The following table summarizes our derivative positions at March 31, 2020:



Aluminum	Maturity Period (month/year)	Notional Amount of Contracts (mmlbs)
Fixed price purchase contracts	4/20 through 12/22	115.3
Fixed price sales contracts	4/20 through 11/21	0.8
Midwest premium swap contracts¹	4/20 through 12/22	110.4



Alloying Metals	Maturity Period (month/year)	Notional Amount of Contracts (mmlbs)
Fixed price purchase contracts	4/20 through 12/21	16.9



Natural Gas²	Maturity Period (month/year)	Notional Amount of Contracts (mmbtu)
Fixed price purchase contracts	4/20 through 12/24	7,970,000



Electricity³	Maturity Period (month/year)	Notional Amount of Contracts (Mwh)
Fixed price purchase contracts	4/20 through 12/22	613,820



Euro	Maturity Period (month/year)	Notional Amount of Contracts (euro)
Fixed price forward contracts	2/21 through 5/22	34,323,380

____________________


¹	Regional premiums represent the premium over the London Metal Exchange price for primary aluminum which is incurred on our purchases of primary aluminum.

As of March 31, 2020, we had derivative and/or physical delivery commitments with energy companies in place to cover exposure to fluctuations in prices for approximately 75% of the expected natural gas purchases for the remainder of 2020, 76% of the expected natural gas purchases for 2021, 80% of the expected natural gas purchases for both 2022 and 2023 and 75% of the expected natural gas purchases for 2024.


³	As of March 31, 2020, we had derivative and/or physical delivery commitments with energy companies in place to cover exposure to fluctuations in prices for approximately 55% of our expected electricity purchases for both the remainder of 2020 and 2021 and 46% of our expected electricity purchases for 2022.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

Loss (Gain)

The amount of loss (gain) included on our Statements of Consolidated Income associated with all derivative contracts consisted of the following for the periods presented (in millions of dollars):



	Quarter Ended March 31,
	2020			2019
Total of income and expense line items presented in our Statements of Consolidated Income in which the effects of cash flow hedges are recorded	$	286.6		$	315.1

Loss (gain) recognized in income related to cash flow hedges:
Aluminum	5.7			4.2
Alloying metals	0.6			0.1
Natural gas	0.5			(0.1		)
Electricity	0.2			—
Total loss recognized in income related to cash flow hedges	$	7.0		$	4.2

Total of income and expense line items presented in our Statements of Consolidated Income in which the effects of fair value hedges are recorded	$	13.2		$	11.9

Loss (gain) recognized in income related to fair value hedges:
Foreign exchange contracts	0.2			—
Hedged item	(0.2		)	—
Excluded component amortized from AOCI to income	0.2			—
Total loss recognized in income related to fair value hedges	$	0.2		$	—

Fair Values of Derivative Contracts

The fair values of our derivative contracts are based upon trades in liquid markets. Valuation model inputs can be verified and valuation techniques do not involve significant judgment. The fair values of such financial instruments are classified within Level 2 of the fair value hierarchy.

All of our derivative contracts with counterparties are subject to enforceable master netting arrangements. We reflect the fair value of our derivative contracts on a gross basis on our Consolidated Balance Sheets. The following table presents the fair value of our derivative financial instruments as of the periods presented (in millions of dollars):



	March 31, 2020								December 31, 2019
	Derivative Assets		Derivative Liabilities			Net Amount			Derivative Assets		Derivative Liabilities			Net Amount
Cash Flow Hedges:
Aluminum –
Fixed price purchase contracts	$	—	$	(14.2	)	$	(14.2	)	$	1.0	$	(4.1	)	$	(3.1	)
Fixed price sales contracts	0.1		—			0.1			—		—			—
Midwest premium swap contracts	—		(4.3		)	(4.3		)	—		(1.2		)	(1.2		)
Alloying Metals – Fixed price purchase contracts	—		(5.5		)	(5.5		)	0.4		(1.5		)	(1.1		)
Natural gas – Fixed price purchase contracts	0.1		(3.0		)	(2.9		)	—		(2.8		)	(2.8		)
Electricity – Fixed price purchase contracts	1.6		(2.8		)	(1.2		)	2.6		(1.6		)	1.0

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED



	March 31, 2020								December 31, 2019
	Derivative Assets		Derivative Liabilities			Net Amount			Derivative Assets		Derivative Liabilities			Net Amount
Fair Value Hedges:
Foreign currency – Fixed price forward contracts	—		(1.0		)	(1.0		)	—		—			—

Total	$	1.8	$	(30.8	)	$	(29.0	)	$	4.0	$	(11.2	)	$	(7.2	)

The following table presents the total amounts of derivative assets and liabilities on our Consolidated Balance Sheets as of the periods presented (in millions of dollars):



	March 31, 2020			December 31, 2019
Derivative assets:
Prepaid expenses and other current assets	$	0.6		$	2.1
Other assets	1.2			1.9
Total derivative assets	$	1.8		$	4.0

Derivative liabilities:
Other accrued liabilities	$	(19.0	)	$	(7.6	)
Long-term liabilities	(11.8		)	(3.6		)
Total derivative liabilities	$	(30.8	)	$	(11.2	)

Fair Value of Other Financial Instruments

Cash and Cash Equivalents. See Note 2 for components of cash and cash equivalents.

Available for Sale Securities. We hold debt investment securities that are accounted for as available for sale securities and are presented as cash equivalents and short-term investments on our Consolidated Balance Sheets. The fair value of the debt investment securities, which consist of commercial paper, is determined based on valuation models that use observable market data. All of our short-term investments generally have maturity dates under 12 months, however, due to market conditions existing as of March 31, 2020, all short-term investments had maturity dates of less than 90 days. We review our debt investment portfolio for credit loss at least quarterly or when there are changes in credit risk or other potential valuation concerns. At March 31, 2020 and December 31, 2019, the total unrealized loss, net of tax, included in AOCI was immaterial. We believe that it is probable that the principal and interest will be collected in accordance with the contractual terms, and that the unrealized loss on these securities was due to normal market fluctuations, and not due to increased credit risk or other valuation concerns. The fair value input of our available for sale securities, which are classified within Level 2 of the fair value hierarchy, is calculated based on broker quotes. The amortized cost for available for sale securities approximates their fair value.

The following table classifies our other financial assets under the appropriate level of the fair value hierarchy as of March 31, 2020 (in millions of dollars):



	Level 1		Level 2		Level 3		Total
Cash and cash equivalents	$	199.6	$	107.6	$	—	$	307.2
Short-term investments	—		39.3		—		39.3
Total	$	199.6	$	146.9	$	—	$	346.5

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

The following table classifies our other financial assets under the appropriate level of the fair value hierarchy as of December 31, 2019 (in millions of dollars):



	Level 1		Level 2		Level 3		Total
Cash and cash equivalents	$	28.2	$	236.1	$	—	$	264.3
Short-term investments	—		78.7		—		78.7
Total	$	28.2	$	314.8	$	—	$	343.0

All Other Financial Assets and Liabilities. We believe that the fair values of our accounts receivable, contract assets, accounts payable and accrued liabilities approximate their respective carrying values due to their short maturities and nominal credit risk.

6. Debt and Credit Facility

Senior Notes

4.625% Senior Notes. In November 2019, we issued $500.0 million principal amount of 4.625% unsecured senior notes due March 1, 2028 ("4.625% Senior Notes") at 100% of the principal amount. The unamortized amount of debt issuance costs as of March 31, 2020 was $7.2 million. Interest expense, including amortization of debt issuance costs, relating to the 4.625% Senior Notes was $6.0 million for the quarter ended March 31, 2020, of which $0.3 million was capitalized as construction in progress. The effective interest rate of the 4.625% Senior Notes was approximately 4.8% per annum, taking into account the amortization of debt issuance costs. The fair value of the outstanding 4.625% Senior Notes, which are Level 1 liabilities, was approximately $438.1 million and $513.5 million at March 31, 2020 and December 31, 2019, respectively.

5.875% Senior Notes. In May 2016, we issued $375.0 million principal amount of 5.875% unsecured senior notes due May 15, 2024 ("5.875% Senior Notes") at 100% of the principal amount. On December 18, 2019, we redeemed in full all outstanding 5.875% Senior Notes at a redemption price of 104.406% of the principal amount. The effective interest rate of the 5.875% Senior Notes was approximately 6.1% per annum, taking into account the amortization of debt issuance costs. Interest expense, including amortization of debt issuance costs, relating to the 5.875% Senior Notes was $5.7 million for the quarter ended March 31, 2019 net of $0.5 million capitalized as construction in progress.

Revolving Credit Facility

Our credit agreement with Wells Fargo Bank, National Association, as administrative agent, and the other financial institutions party thereto ("Revolving Credit Facility") provides us with a $375.0 million funding commitment through October 2024.

The table below summarizes availability and usage of our Revolving Credit Facility as determined by a borrowing base calculated as of March 31, 2020 (in millions of dollars except for borrowing rate):



Revolving Credit Facility borrowing commitment	$	375.0
Borrowing base availability	$	349.2
Less: Outstanding borrowings under Revolving Credit Facility	—
Less: Outstanding letters of credit under Revolving Credit Facility	(7.7		)
Remaining borrowing availability	$	341.5
Borrowing rate (if applicable)¹	3.50		%

____________________


¹	Such borrowing rate, if applicable, represents the interest rate for any overnight borrowings under the Revolving Credit Facility.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

7. Commitments and Contingencies

Commitments. We have a variety of financial commitments, including purchase agreements, forward foreign exchange and forward sales contracts, indebtedness and letters of credit (see Note 5 and Note 6).

Environmental Contingencies. We are subject to a number of environmental laws and regulations, to potential fines or penalties assessed for alleged breaches of such laws and regulations and to potential claims based upon such laws and regulations. We are also subject to legacy environmental contingencies related to activities that occurred at operating facilities prior to July 6, 2006, which represent the majority of our environmental accruals. The status of these environmental contingencies are discussed below. We have established procedures for regularly evaluating environmental loss contingencies. Our environmental accruals represent our undiscounted estimate of costs reasonably expected to be incurred based on presently enacted laws and regulations, existing requirements, currently available facts, existing technology and our assessment of the likely remediation actions to be taken.

We continue to pursue remediation activities, primarily to address the historical use of oils containing polychlorinated biphenyls ("PCBs") at our Spokane, Washington ("Trentwood") facility. Our remediation efforts are in collaboration with the Washington State Department of Ecology ("Washington State Ecology"), to which we submitted a feasibility study in 2012 of remediation alternatives and from which we received permission to begin certain remediation activities pursuant to a signed work order. As we have finished a number of sections of the work plan, we have received approval from Washington State Ecology on satisfactory completion of those sections. Additionally, in cooperation with Washington State Ecology, to determine the treatability and evaluate the feasibility of removing PCBs from ground water under the Trentwood facility, we constructed an experimental treatment facility and began treatment operations in 2016. As the long-term success of the new methodology cannot be reasonably determined at this time, it is possible we may need to make upward adjustments to our related accruals and cost estimates as the long-term results become available.

During 2013, at the request of the Ohio Environmental Protection Agency ("OEPA"), we initiated an investigational study of the Newark, Ohio ("Newark") facility related to historical on-site waste disposal. In the fourth quarter of 2018, we submitted our remedial investigation study to the OEPA, which is subject to their review and approval. Following OEPA approval of the remedial investigational study, we will then prepare the final feasibility study and update estimates for probable and estimable remediation, if any. The actual and final cost for remediation will not be fully determinable until a final feasibility study is submitted and accepted by the OEPA and work plans are prepared, which is expected to occur in the next six to 12 months.

During 2020, following issuance of information requests under the Comprehensive Environmental Response, Compensation and Liability Act of 1980 ("CERCLA"), to which we responded, United States Environmental Protection Agency ("USEPA") issued a general notice letter to us alleging that we are a potentially responsible party under CERCLA for response and other potential remedial actions concerning property owned by us near our former smelter site in Mead, Spokane County, Washington. On February 21, 2020, we responded to the General Notice letter and are in early discussions with USEPA regarding potential resolution of the matter.

At March 31, 2020, our environmental accrual of $17.0 million represented our estimate of the incremental remediation cost based on: (i) proposed alternatives in the final feasibility study related to the Trentwood facility; (ii) currently available facts with respect to our Newark facility; and (iii) facts related to certain other locations owned or formerly owned by us. In accordance with approved and proposed remediation action plans, we expect that the implementation and ongoing monitoring could occur over a period of 30 or more years.

As additional facts are developed, feasibility studies are completed, remediation plans are modified, necessary regulatory approvals for the implementation of remediation are obtained, alternative technologies are developed and/or other factors change, there may be revisions to management's estimates and actual costs may exceed the current environmental accruals. We believe at this time that it is reasonably possible that undiscounted costs associated with these environmental matters may exceed current accruals by amounts that could be, in the aggregate, up to an estimated $11.6 million over the remediation period. It is reasonably possible that our recorded estimate will change in the next 12 months.

Other Contingencies. We are party to various lawsuits, claims, investigations and administrative proceedings that arise in connection with past and current operations. We evaluate such matters on a case-by-case basis and our policy is to vigorously contest any such claims we believe are without merit. We accrue for a legal liability when it is both probable that a liability has been incurred and the amount of the loss is reasonably estimable. Quarterly, in addition to when changes in facts and circumstances require it, we review and adjust these accruals to reflect the impacts of negotiations, settlements, rulings, advice

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

of legal counsel and other information and events pertaining to a particular case. While uncertainties are inherent in the final outcome of such matters and it is presently impossible to determine the actual cost that may ultimately be incurred, we believe that we have sufficiently accrued for such matters and that the ultimate resolution of pending matters will not have a material impact on our consolidated financial position, operating results or liquidity.

8. Accumulated Other Comprehensive Loss

The following table presents the changes in the accumulated balances for each component of AOCI for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020			2019
Defined Benefit Pension Plan and Salaried VEBA:
Beginning balance	$	(33.2	)	$	(35.6	)
Amortization of net actuarial loss¹	0.1			0.1
Amortization of prior service cost¹	1.2			1.4
Less: income tax expense²	(0.3		)	(0.4		)
Net amortization reclassified from AOCI to Net income	1.0			1.1
Other comprehensive income, net of tax	1.1			1.1
Ending balance	$	(32.1	)	$	(34.5	)

Available for Sale Securities:
Beginning balance	$	0.3		$	0.3
Unrealized gain on available for sale securities	1.3			1.0
Less: income tax expense	(0.3		)	(0.3		)
Net unrealized gain on available for sale securities	1.0			0.7
Reclassification of unrealized gain upon sale of available for sale securities³	(1.5		)	(1.2		)
Less: income tax benefit²	0.3			0.3
Net gain reclassified from AOCI to Net income	(1.2		)	(0.9		)
Other comprehensive loss, net of tax	(0.2		)	(0.2		)
Ending balance	$	0.1		$	0.1

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED



	Quarter Ended
	March 31,
	2020			2019
Cash Flow Hedges:
Beginning balance	$	(5.6	)	$	(13.4	)
Unrealized (loss) gain on cash flow hedges	(27.9		)	7.4
Less: income tax benefit (expense)	6.8			(1.8		)
Net unrealized (loss) gain on cash flow hedges	(21.1		)	5.6
Reclassification of unrealized loss upon settlement of cash flow hedges⁴	7.0			4.2
Less: income tax expense²	(1.8		)	(1.0		)
Net loss reclassified from AOCI to Net income	5.2			3.2
Other comprehensive (loss) income, net of tax	(15.9		)	8.8
Ending balance	$	(21.5	)	$	(4.6	)

Fair Value Hedges:
Beginning balance	$	—		$	—
Unrealized loss on fair value hedges	(0.8		)	—
Less: income tax benefit	0.2			—
Net unrealized loss on fair value hedges	(0.6		)	—
Excluded component amortized from OCI to Net income⁵	0.2			—
Less: income tax expense²	(0.1		)	—
Net loss reclassified from AOCI to Net income	0.1			—
Other comprehensive loss, net of tax	(0.5		)	—
Ending balance	$	(0.5	)	$	—

Foreign Currency Translation:
Beginning balance	$	(0.1	)	$	(0.1	)
Other comprehensive income, net of tax	—			—
Ending balance	$	(0.1	)	$	(0.1	)

Total AOCI ending balance	$	(54.1	)	$	(39.1	)

____________________


¹	Amounts amortized out of AOCI relating to Salaried VEBA adjustments were included within Other (expense) income, net, as a component of Net periodic postretirement benefit cost relating to Salaried VEBA.


²	Income tax amounts reclassified out of AOCI were included as a component of Income tax provision.


³	Amounts reclassified out of AOCI relating to sales of available for sale securities were included as a component of Other (expense) income, net. We use the specific identification method to determine the amount reclassified out of AOCI.


⁴	Amounts reclassified out of AOCI relating to cash flow hedges were included as a component of COGS. As of March 31, 2020, we estimate a net mark-to-market loss before tax of $18.1 million in AOCI will be reclassified into Net income within the next 12 months.


⁵	Amounts reclassified out of AOCI relating to fair value hedges were included as a component of depreciation expense. As of March 31, 2020, we estimate a net mark-to-market loss before tax of $0.6 million in AOCI will be reclassified into Net income within the next 12 months.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

9. Other (Expense) Income, Net

Other (expense) income, net, consisted of the following for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020			2019
Interest income	$	0.1		$	0.2
Net periodic postretirement benefit cost relating to Salaried VEBA	(1.2		)	(1.6		)
Realized gain on available for sale securities	1.5			1.2
Unrealized (loss) gain on equity securities	(0.6		)	0.5
All other (expense) income, net	(0.6		)	0.2
Other (expense) income, net	$	(0.8	)	$	0.5

10. Income Tax Matters

The provision for income taxes consisted of the following for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020		2019
Domestic	$	9.5	$	9.5
Foreign	0.1		0.3
Total	$	9.6	$	9.8

The income tax provision for the quarters ended March 31, 2020 and March 31, 2019 was $9.6 million and $9.8 million, respectively, reflecting an effective tax rate of 25% and 26%, respectively. There was no material difference between the effective tax rate and the projected blended statutory tax rate for the quarter ended March 31, 2020.

The difference between the effective tax rate and the projected blended statutory tax rate for the quarter ended March 31, 2019 was primarily due to: (i) an increase of $0.4 million (1% of taxable income) related to non-deductible compensation expense and (ii) an increase of $0.7 million (2% of taxable income) related to the valuation allowance for certain state net operating losses, partially offset by a decrease of $0.5 million (1% of taxable income) for the recognition of excess tax benefits from stock-based compensation.

Our gross unrecognized benefits relating to uncertain tax positions were $3.9 million and $4.1 million at March 31, 2020 and December 31, 2019, respectively, of which, $0.4 million and $0.9 million would be recorded through our income tax provision and thus impact the effective tax rate at March 31, 2020 and December 31, 2019, respectively, if the gross unrecognized tax benefits were to be recognized.

We do not expect our gross unrecognized tax benefits to significantly change within the next 12 months.

On March 27, 2020, Congress enacted the Coronavirus Aid, Relief and Economic Security ("CARES") Act to provide certain relief as a result of the Coronavirus Disease 2019 outbreak. We are currently evaluating how provisions in the CARES Act will impact our consolidated financial statements.

11. Net Income Per Share

Basic net income per share is computed by dividing distributed and undistributed net income allocable to common shares by the weighted-average number of common shares outstanding during the applicable period. The basic weighted-average number of common shares outstanding during the period excludes non-vested share-based payment awards. Diluted net income per share was calculated under the treasury stock method for the quarters ended March 31, 2020 and March 31, 2019, which in both periods was more dilutive than the two-class method.

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

The following table sets forth the computation of basic and diluted net income per share for the periods presented (in millions of dollars, except share and per share amounts):



	Quarter Ended
	March 31,
	2020		2019
Numerator:
Net income	$	29.1	$	28.0
Denominator – Weighted-average common shares outstanding (in thousands):
Basic	15,838		16,108
Add: dilutive effect of non-vested common shares, restricted stock units and performance shares¹	170		264
Diluted	16,008		16,372

Net income per common share, Basic:	$	1.83	$	1.74
Net income per common share, Diluted:	$	1.81	$	1.71

____________________


¹	During the quarters ended March 31, 2020 and March 31, 2019, a total of 2000 and 4000 shares, respectively, were excluded from the weighted-average diluted shares computation as their inclusion would have been anti-dilutive.

12. Supplemental Cash Flow Information



	Quarter Ended
	March 31,
	2020		2019
	(In millions of dollars)
Interest paid	$	6.1	$	0.3
Non-cash investing and financing activities (included in Accounts payable):
Unpaid purchases of property and equipment	$	4.7	$	4.7
Stock repurchases not yet settled	$	—	$	0.2

Supplemental lease disclosures:
Operating lease liabilities arising from obtaining operating lease assets	$	4.2	$	0.5
Cash paid for amounts included in the measurement of operating lease liabilities	$	1.1	$	0.9
Finance lease liabilities arising from obtaining finance lease assets	$	0.1	$	—

	March 31, 2020		March 31, 2019
	(In millions of dollars)
Components of cash, cash equivalents and restricted cash:
Cash and cash equivalents	$	307.2	$	115.3
Restricted cash included in Prepaid expenses and other current assets¹	—		0.3
Restricted cash included in Other assets¹	13.9		13.8
Total cash, cash equivalents and restricted cash presented on our Statements of Consolidated Cash Flows	$	321.1	$	129.4

Notes Index

KAISER ALUMINUM CORPORATION AND SUBSIDIARY COMPANIES

NOTES TO INTERIM CONSOLIDATED FINANCIAL STATEMENTS - UNAUDITED

____________________


¹	We are required to keep on deposit certain amounts that are pledged or held as collateral relating to workers' compensation and other agreements. We account for such deposits as restricted cash. From time to time, such restricted funds could be returned to us or we could be required to pledge additional cash.

13. Business, Product and Geographical Area Information

Our primary line of business is the production of semi-fabricated specialty aluminum mill products, such as aluminum plate and sheet and extruded and drawn products, primarily used in aerospace and high strength ("Aero/HS products"), automotive ("Automotive Extrusions"), general engineering ("GE products") and other industrial ("Other products"). We operate 12 focused production facilities in the United States and 1 in Canada. Our chief operating decision maker reviews and evaluates our business as a single operating segment.

The following table presents Net sales by end market applications and by timing of control transfer for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020		2019
Net sales:
Aero/HS products	$	196.0	$	198.5
Automotive Extrusions	47.4		53.0
GE products	121.7		130.0
Other products	4.2		13.7
Total net sales	$	369.3	$	395.2

Timing of revenue recognition:
Products transferred at a point in time	$	215.6	$	223.3	¹
Products transferred over time	153.7		171.9		¹
Total net sales	$	369.3	$	395.2

__________________


^1.	As corrected from $131.8 million of products transferred at a point in time and $263.4 million of products transferred over time.

The following table presents geographic information for income taxes paid for the periods presented (in millions of dollars):



	Quarter Ended
	March 31,
	2020		2019
Income taxes paid:
Domestic	$	—	$	0.1
Foreign	0.1		0.8
Total income taxes paid	$	0.1	$	0.9

14. Subsequent Events

Dividend Declaration. On April 14, 2020, we announced that our Board of Directors declared a cash dividend of $0.67 per common share. As such, we expect to pay approximately $10.7 million (including dividend equivalents) on or about May 15, 2020 to stockholders of record and the holders of certain restricted stock units at the close of business on April 24, 2020.

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations

This Item should be read in conjunction with Part I, Item 1. "Financial Statements" of this Quarterly Report on Form 10-Q (this "Report").

This Report contains statements which constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. These statements appear throughout this Report and can be identified by the use of forward-looking terminology such as "believes," "expects," "may," "estimates," "will," "should," "plans" or "anticipates," or the negative of the foregoing or other variations of comparable terminology, or by discussions of strategy. Readers are cautioned that any such forward-looking statements are not guarantees of future performance and involve significant risks and uncertainties and that actual results may vary from those in the forward-looking statements as a result of various factors. These factors include: (i) the effectiveness of management's strategies and decisions; (ii) general economic and business conditions, including the impact of the global outbreak of Coronavirus Disease 2019 ("COVID-19") and governmental and other actions taken in response, cyclicality and other conditions in the aerospace, automotive and other end market applications we serve; (iii) developments in technology; (iv) new or modified statutory or regulatory requirements; and (v) changing prices and market conditions. This Item, Part II, Item 1A. "Risk Factors" included in this Report and Part I, Item 1A. "Risk Factors" included in our Annual Report on Form 10-K for the year ended December 31, 2019 each identify other factors that could cause actual results to vary. No assurance can be given that these are all of the factors that could cause actual results to vary materially from the forward-looking statements.

Management's discussion and analysis of financial condition and results of operations ("MD&A") is designed to provide a reader of our financial statements with a narrative from the perspective of our management on our financial condition, results of operations, liquidity and certain other factors that may affect our future results. Our MD&A is presented in the following sections:


•	Overview;


•	Highlights of the Quarter Ended March 31, 2020;


•	Results of Operations;


•	Liquidity and Capital Resources;


•	Contractual Obligations, Commercial Commitments and Off-Balance-Sheet Arrangements;


•	Critical Accounting Estimates and Policies;


•	New Accounting Pronouncements; and


•	Available Information.

Our MD&A should be read in conjunction with our consolidated financial statements and related notes included in Part I, Item 1. "Financial Statements" of this Report and our consolidated financial statements and related notes included in Part II, Item 8. "Financial Statements and Supplementary Data" of our Annual Report on Form 10-K for the year ended December 31, 2019.

This information contains certain non-GAAP financial measures. A non-GAAP financial measure is defined as a numerical measure of a company's financial performance that excludes or includes amounts so as to be different than the most directly comparable measure calculated and presented in accordance with generally accepted accounting principles ("GAAP") in the statements of income, balance sheets or statements of cash flows of the company. We have provided a reconciliation of non-GAAP financial measures to the most directly comparable financial measure in the accompanying tables. We have also provided discussion of the reasons we believe that presentation of the non-GAAP financial measures provide useful information to investors, as well as any additional ways in which we use the non-GAAP financial measures. The non-GAAP financial measures used in the following discussions are value added revenue ("VAR"), adjusted earnings before interest, taxes, depreciation and amortization ("Adjusted EBITDA") and ratios related thereto. These measures are presented because management uses this information to monitor and evaluate financial results and trends and believes this information to also be useful for investors.

In the discussion of operating results below, we refer to certain items as "non-run-rate items." For purposes of such discussion, non-run-rate items are items that, while they may recur from period-to-period: (i) are particularly material to results; (ii) affect costs primarily as a result of external market factors; and (iii) may not recur in future periods if the same level of underlying performance were to occur. Non-run-rate items are part of our business and operating environment but are worthy of being highlighted for the benefit of readers of our financial statements. Our intent is to allow users of the financial statements to consider our results both in light of and separately from such items. For a reconciliation of Adjusted EBITDA to Net income, see "Results of Operations - Selected Operational and Financial Information" below.

A fundamental part of our business model is to remain neutral to the impact from fluctuations in the market price for aluminum, thereby earning profit predominately from the conversion of aluminum into semi-fabricated mill products. We refer to this as "metal price neutrality." We purchase primary and scrap, or recycled, aluminum, our main raw material, at prices that fluctuate on a monthly basis, and our pricing policies generally allow us to pass the underlying cost of metal through to our customers so that we remain neutral to metal pricing. However, for some of our higher VAR products sold on a spot basis, competitive dynamics may limit the amount and/or delay the timing of selling price increases to recover our increased aluminum costs, resulting in a lag up to several months during which we may be exposed to metal price risk. As a result, we can experience an adverse impact when metal prices increase, and a favorable impact to us when metal prices decline, as we and our competitors tend to defer adjusting pricing unless market dynamics require such in a declining metal cost environment. Additionally, we sometimes enter into firm-price customer sales agreements that specify a firm underlying metal price plus a conversion price. Spot sales with lagged metal price pass through and firm-price sales agreements create metal price exposure for us, which we mitigate through a hedging program with an objective to remain metal price neutral.

Our pricing policies and hedging program are intended to significantly reduce or eliminate the impact on our profitability of fluctuations in underlying metal price so that our earnings are predominantly associated with the conversion of aluminum to semi-fabricated mill products. To allow users of our financial statements to consider the impact of metal cost on our Net sales, we disclose Net sales as well as VAR, which is Net sales less the Hedged Cost of Alloyed Metal. As used in this discussion, "Hedged Cost of Alloyed Metal" is the cost of our metal inputs at the average Midwest Transaction Price of aluminum plus the cost of alloying elements and any realized gains and/or losses on settled hedges related to the metal sold in the referenced period. The average Midwest Transaction Price of aluminum reflects the primary aluminum supply/demand dynamics in North America. For a reconciliation of VAR to Net sales, see "Results of Operations - Selected Operational and Financial Information" below.

Overview

We manufacture and sell semi-fabricated specialty aluminum mill products for the following end market applications: aerospace and high strength ("Aero/HS products"); automotive ("Automotive Extrusions"); general engineering ("GE products"); and other industrial ("Other products"). Our fabricated aluminum mill products include flat-rolled (plate and sheet), extruded (rod, bar, hollows and shapes), drawn (rod, bar, pipe, tube and wire) and certain cast aluminum products. The sophistication of our products is due to the metallurgy and physical properties of the metal and the special characteristics that are required for particular end uses. We strategically choose to serve technically challenging applications for which we can deploy our core metallurgical and process technology capabilities to produce highly engineered mill products with differentiated characteristics that present opportunities for us to receive premium pricing and to create long-term profitable growth.

With respect to the global market for flat-rolled aluminum mill products, our focus is on heat treat plate and sheet for applications that require higher strength and other desired product attributes that cannot be achieved by common alloy rolled products. The primary end market applications of flat-rolled heat treat plate and sheet are Aero/HS products (which we sell globally) and GE products (which we predominantly sell within North America). Similarly, in the areas of aluminum extrusions, we focus on demanding Aero/HS products, Automotive Extrusions and GE products that require high strength, machinability or other specific properties where we can create and maintain a defensible competitive position because of our technical expertise, strong production capability and high product quality. We primarily serve North American demand for extruded mill products.

Our rolling mill in Spokane, Washington ("Trentwood") produces heat treat plate and sheet for aerospace and general engineering end market applications. Our 11 extrusion/drawing facilities, 10 of which are in the United States and one of which is in Canada, serve aerospace, automotive or general engineering applications. Our newest facility, which we acquired in 2018, is located in Columbia, New Jersey and focuses on multi-material advanced manufacturing methods and techniques, which

include multi-axis computer numerical control ("CNC") machining, additive manufacturing ("3D Printing"), welding and fabrication for demanding aerospace and defense, automotive, high tech and general industrial applications. Our consolidated Net sales for the quarter ended March 31, 2020 totaled $369.3 million on 155.6 million pounds shipped from our facilities. We employed approximately 2,835 people at March 31, 2020.

We have long-standing relationships with our customers, which consist primarily of blue-chip companies including leading aerospace and automotive manufacturers, tier one aerospace and automotive suppliers and metal service centers. Historically, approximately 48% of our shipments has been sold direct to manufacturers or tier one suppliers and approximately 52% has been sold to metal service centers. In our served markets, we seek to be the supplier of choice by pursuing "Best in Class" customer satisfaction driven by quality, availability, service and delivery performance. We strive to differentiate our product portfolio through our broad product offering and our KaiserSelect^® products, which are engineered and manufactured to deliver enhanced product characteristics with improved consistency, so as to result in better performance, lower waste and, in many cases, lower production cost for our customers.

Overall, the aerospace and defense industries' consumption of fabricated aluminum products is driven by factors that include airframe build rates, the mix of aircraft models being built and defense spending. Unanticipated changes in build rates and mix of aircraft models being built can trigger restocking or destocking throughout the long aerospace supply chain, temporarily impacting demand for our Aero/HS products. Growth in demand for aerospace plate has exceeded demand growth for other forms of Aero/HS products as aircraft manufacturers have migrated to monolithic component design, where a single piece of aluminum, usually a plate, is heavily machined to form a desired part rather than creating the same part by assembling sub-components made of aluminum sheet, extrusions or forgings that are affixed to one another using rivets, bolts or welds.

Demand for Automotive Extrusions is driven by factors that include automotive build rates in North America, aluminum content and the success and customer acceptance of automotive platforms our products are produced for, which may be significantly different than overall automotive build rates. In recent years, automotive original equipment manufacturers ("OEMs") and their suppliers have, at an increasing pace, been converting many automotive components that historically were made of steel to aluminum to decrease weight without sacrificing structural integrity and safety performance and thereby achieve greater fuel efficiency standards mandated by stringent United States' Corporate Average Fuel Economy regulations. We believe fuel efficiency standards along with consumer preference for larger vehicles will continue to drive growth in demand for aluminum extruded components in passenger vehicles as a replacement for the heavier weight of steel components. Our Automotive Extrusions are designed and produced to provide specific mechanical properties and performance attributes required in automotive applications across a broad mix of North American OEMs and automotive platforms. We believe that these attributes are not easily replicated by our competitors and are important to our customers, who are typically tier one automotive suppliers.

Demand growth and cyclicality for GE products tend to mirror broad economic patterns and industrial activity in North America. Demand is also impacted by the destocking and restocking of inventory throughout the supply chain.

Beginning in March 2020, our industry, along with global economic conditions generally, have been significantly impacted by the outbreak of COVID-19. Though the impact of COVID-19 on our operations has varied by local conditions and applicable government mandates, a significant amount of automotive, aerospace and other customers have experienced serious reductions in sales and/or substantially curtailed their operations, decreasing demand for our products. The ultimate duration and impact of the COVID-19 outbreak on our and our customers' operations is presently unclear. Furthermore, the extent to which we or our customers may successfully mitigate the impact of COVID-19, if at all, is not presently ascertainable. However, we expect that our results of operations in future periods will be adversely impacted by the COVID-19 outbreak and its negative effects on global economic conditions. For additional risks relating to the COVID-19 outbreak, see Item 1A. Risk Factors in Part II of this Report.

Highlights of the quarter ended March 31, 2020 include:


•	Outbreak of COVID-19 resulted in automotive customers curtailing operations late in the quarter;


•	VAR for our aerospace applications during the quarter ended March 31, 2020 increased approximately 4% from the quarter ended March 31, 2019 on a 1% decrease in shipments, reflecting favorable pricing and mix;


•	VAR for our automotive extrusions declined approximately 7% during the quarter ended March 31, 2020 as compared with the quarter ended March 31, 2019 on a 5% decrease in shipments, reflecting the impact of automotive customer plant closures late in the quarter;


•	Both VAR and shipments for our general engineering applications were flat during the quarter ended March 31, 2020 as compared with the quarter ended March 31, 2019;


•	Combined cash and cash equivalents, short-term investments and net borrowing availability under our Revolving Credit Facility was approximately $688.0 million as of March 31, 2020;


•	We paid cash dividends and dividend equivalents of $11.3 million and repurchased 152,763 shares of our common stock for $12.5 million at a weighted average price of $81.94 during the quarter ended March 31, 2020;


•	We suspended our share repurchase program as of March 18, 2020 in response to the current economic conditions.

Results of Operations

Consolidated Results of Operations

Net Sales. Net sales totaled $369.3 million and $395.2 million for the quarters ended March 31, 2020 and March 31, 2019, respectively, reflecting a year-over-year 7.0 million pound (4%) decrease in shipment volume and a $0.06/lb (2%) decrease in average realized sales price per pound. The shipment volume decrease primarily reflected: (i) a 4.5 million pound (64%) decrease in Other products reflecting our planned exit from non-strategic applications; (ii) a 1.3 million pound (5%) decrease in Automotive Extrusions reflecting the impact of automotive plant closures; (iii) a 0.6 million pound (1%) decrease in GE products; and (iv) a 0.6 million pound (1%) decrease in Aero/HS products. The decrease in average realized sales price per pound reflected a $0.11/lb (10%) decrease in average Hedged Cost of Alloyed Metal price per pound, partially offset by a $0.05/lb (4%) increase in VAR per pound due to favorable pricing and mix of Aero/HS products shipments. See the table in "Selected Operational and Financial Information" below for further details.

Cost of Products Sold, Excluding Depreciation and Amortization and Other Items. Cost of products sold, excluding depreciation and amortization and other items for the quarter ended March 31, 2020 totaled $286.6 million, or 78% of Net sales, compared to $315.1 million, or 80% of Net sales, for the quarter ended March 31, 2019. The decrease of $28.5 million reflected a $24.2 million decrease in Hedged Cost of Alloyed Metal and a $4.3 million decrease in net manufacturing conversion and other costs. Of the $24.2 million decrease in Hedged Cost of Alloyed Metal, $16.6 million was due to lower hedged metal prices and $7.6 million was due to lower shipment volume, as discussed above in "Net Sales." The $4.3 million decrease in net manufacturing conversion and other costs was due primarily to the overall reduction in shipment volume of Other products due to the planned exit from non-strategic applications. See "Selected Operational and Financial Information" below for a further discussion of the comparative results of operations for the quarters ended March 31, 2020 and March 31, 2019.

Selling, General, Administrative, Research and Development ("SG&A and R&D"). SG&A and R&D expense totaled $23.9 million and $25.2 million for the quarters ended March 31, 2020 and March 31, 2019, respectively. The decrease during the quarter ended March 31, 2020 was due primarily to: (i) a $1.0 million reduction in salaries and benefits and (ii) a $0.6 million reduction in miscellaneous selling and marketing costs.

Interest Expense. Interest expense represents cash and non-cash interest expense incurred on our 4.625% unsecured senior notes due March 1, 2028, our 5.875% unsecured senior notes due May 15, 2024 and our revolving credit facility, net of capitalized interest. The 5.875% unsecured senior notes were redeemed on December 18, 2019 (see Note 6 of Notes to Interim Consolidated Financial Statements included in this Report). Interest expense was $6.1 million and $5.7 million for the quarters ended March 31, 2020 and March 31, 2019, respectively, net of $0.3 million and $0.5 million of interest expense capitalized as part of construction in progress for the quarters ended March 31, 2020 and March 31, 2019, respectively.

Other (Expense) Income, Net. See Note 9 of Notes to Interim Consolidated Financial Statements included in this Report for details.

Income Tax Provision. See Note 10 of Notes to Interim Consolidated Financial Statements included in this Report for disclosure regarding our income tax provision.

Selected Operational and Financial Information

The following data should be read in conjunction with our consolidated financial statements and the notes thereto included in Part I, Item 1. "Financial Statements" of this Report. Interim results are not necessarily indicative of those for a full year.

The table below provides selected operational and financial information for each period presented (in millions of dollars):



	Quarter Ended March 31,
	2020			2019
Net income	$	29.1		$	28.0
Interest expense	6.1			5.7
Other expense (income), net	0.8			(0.5		)
Income tax provision	9.6			9.8
Depreciation and amortization	13.2			11.9
Non-run-rate items:
Adjustments to plant-level LIFO¹	(0.7		)	(1.8		)
Mark-to-market loss on derivative instruments²	0.1			2.4
Workers' compensation cost due to discounting	0.7			0.3
Environmental expenses³	0.5			0.4
Total non-run-rate items	0.6			1.3
Adjusted EBITDA	$	59.4		$	56.2

____________________


¹	We manage our business on a monthly last-in, first-out ("LIFO") basis at each plant, but report inventory externally on an annual LIFO basis in accordance with GAAP on a consolidated basis. This line item represents the conversion from GAAP LIFO applied on a consolidated basis to monthly LIFO applied on a plant-by-plant basis.

Mark-to-market loss on derivative instruments for 2020 and 2019 represents the reversal of mark-to-market loss (gain) on hedges entered into prior to the adoption of Accounting Standards Update ("ASU") No. 2017-12, Derivatives and Hedging (Topic 815): Targeted Improvements to Accounting for Hedging Activities ("ASU 2017-12") and settled in the periods presented above. Adjusted EBITDA reflects the realized loss of such settlements.


³	Non-run-rate environmental expenses are related to legacy activities at operating facilities prior to July 6, 2006. See Note 7 of Notes to Interim Consolidated Financial Statements included in this Report for additional information relating to the environmental expenses.

Adjusted EBITDA for the quarter ended March 31, 2020 was $3.2 million higher than Adjusted EBITDA for the quarter ended March 31, 2019 reflecting favorable aerospace pricing and mix and cost improvement despite inefficiencies from pandemic-related reductions in volume, and costs related to unplanned downtime at our Trentwood facility during the quarter ended March 31, 2019 that were not repeated in the quarter ended March 31, 2020.

The table below provides our shipment and VAR information (in millions of dollars, except shipments and VAR per pound) by end market applications for each period presented:



	Quarter Ended March 31,
	2020						2019
Aero/HS Products:
Shipments (mmlbs)	66.4						67.0
	$			$ / lb			$			$ / lb
Net sales	$	196.0		$	2.95		$	198.5		$	2.96
Less: Hedged Cost of Alloyed Metal	(65.9		)	(0.99		)	(73.6		)	(1.10		)
VAR	$	130.1		$	1.96		$	124.9		$	1.86

Automotive Extrusions:
Shipments (mmlbs)	24.3						25.6
	$			$ / lb			$			$ / lb
Net sales	$	47.4		$	1.95		$	53.0		$	2.07
Less: Hedged Cost of Alloyed Metal	(23.4		)	(0.96		)	(27.3		)	(1.07		)
VAR	$	24.0		$	0.99		$	25.7		$	1.00

GE Products:
Shipments (mmlbs)	62.4						63.0
	$			$ / lb			$			$ / lb
Net sales	$	121.7		$	1.95		$	130.0		$	2.06
Less: Hedged Cost of Alloyed Metal	(61.0		)	(0.98		)	(68.5		)	(1.08		)
VAR	$	60.7		$	0.97		$	61.5		$	0.98

Other Products:
Shipments (mmlbs)	2.5						7.0
	$			$ / lb			$			$ / lb
Net sales	$	4.2		$	1.68		$	13.7		$	1.96
Less: Hedged Cost of Alloyed Metal	(2.4		)	(0.96		)	(7.4		)	(1.06		)
VAR	$	1.8		$	0.72		$	6.3		$	0.90

Total:
Shipments (mmlbs)	155.6						162.6
	$			$ / lb			$			$ / lb
Net sales	$	369.3		$	2.37		$	395.2		$	2.43
Less: Hedged Cost of Alloyed Metal	(152.7		)	(0.98		)	(176.8		)	(1.09		)
VAR	$	216.6		$	1.39		$	218.4		$	1.34

Outlook

The quarter ended March 31, 2020 began with a strong performance and our operating results demonstrated strong demand for our products, however, the recent COVID-19 pandemic has introduced significant business and economic uncertainty, challenges and potential opportunities for the longer-term. At this time, we are focused on the health and safety of our employees, executing on our longstanding business cycle strategy and taking actions in response to the current environment. We do not know how long the pandemic will last, what implications it will have on our business or what type of economic recovery we will experience as we look forward. Furthermore, given the unprecedented nature of these events and related

governmental actions, statements about future outlook that we previously provided, which did not take into account the existence or impact of the COVID-19 outbreak, no longer reflect our outlook for 2020 and should not be relied upon. However, for more than a decade, our business cycle strategy has served us well through a wide range of economic cycles and has prepared us to address the challenges and potential opportunities presented by the pandemic.

We continue to adjust the business in response to the pandemic economy, while also positioning for an economic rebound and potential opportunities to enhance our competitive position. Our focus is on preserving liquidity, which as of March 31, 2020, was $688.0 million. We suspended share repurchases in mid-March 2020, and we are flexing costs with changes in business activity and limiting capital spending to our critical sustaining capital projects. In addition, we will continue to monitor market conditions to determine timing of the various modules contained within the $375.0 million, multi-year expansion project at our Trentwood facility, including the initial $145.0 million planned investment in a new plate stretcher.

Our top priority has and continues to be focused on the health and safety of our employees. All of our facilities have continued to operate during shelter-in-place mandates due to our inclusion in the Critical Manufacturing Sector as defined by the U.S. Department of Homeland Security and recognition as an essential business by state and local government authorities. We are working closely with our employees and local union officials to stress the importance of following Centers for Disease Control and Prevention ("CDC") guidelines to mitigate the risk of exposure to COVID-19. Where possible, our employees will continue working remotely until we return to normal operations. In addition, we have implemented additional health and safety protocols for all outside contractors and service providers required to enter our facilities and we have developed contingency plans at each of our facilities for responding to employees experiencing symptoms, those who may have been in close proximity to anyone displaying symptoms and any employees testing positive for the virus.

Since late February 2020, global air travel has slowed dramatically as a result of the COVID-19 pandemic and large commercial airframe companies and their customers, the airlines, have been significantly impacted. Commercial aerospace represents approximately 33% of our consolidated VAR under normal market conditions. The two largest airframe manufacturers have reduced their build rates and recently curtailed operations on a temporary basis. As a preferred strategic supplier, we are working in partnership with our customers to meet their current needs while also preparing for production levels to ramp up. At this time, we anticipate that our commercial aerospace VAR could be approximately 20% to 25% lower in 2020 compared to our 2019 VAR for these customers. We expect passenger traffic will recover as it has historically following other crises, and the subsequent growth in aircraft builds will continue, represented by a solid backlog for commercial aircraft.

Market conditions for our defense applications remain intact. We have a strong position on many legacy fighter programs in this market and we are a significant supplier to the F-35 fighter program. Demand for our defense business, which represents approximately 10% to 15% of consolidated VAR, is expected to remain strong through 2020.

Many of our automotive tier one suppliers and original equipment manufacturers have temporarily closed facilities and suspended operations in response to COVID-19. Although the general industrial business environment remained steady through March 2020, recent shutdowns of non-essential businesses served by this end market have shown indications of slowing demand. We believe we are well positioned with strong, longstanding customer relationships, and are flexing costs in response to changes in business activity while continuing to support these automotive and industrial customers.

Our strong supplier relationships are also critical to long-term success and we remain current on all of our supplier payment obligations. At this time, we have had no supply issues at any of our facilities, and our suppliers continue to meet all of our material requirements.

Until we have more clarity around the full economic impact of the COVID-19 pandemic, we will suspend providing a full year outlook for 2020.

Liquidity and Capital Resources

Summary

The following table summarizes our liquidity as of the periods presented (in millions of dollars):



	March 31, 2020		December 31, 2019
Available cash and cash equivalents	$	307.2	$	264.3
Short-term investments	39.3		78.7
Borrowing availability under Revolving Credit Facility, net of letters of credit¹	341.5		323.1
Total liquidity	$	688.0	$	666.1

____________________


¹	Borrowing availability under the Revolving Credit Facility as determined by a borrowing base calculated as of March 31, 2020 and December 31, 2019.

We place our cash in bank deposits and money market funds with high credit quality financial institutions. Cash equivalents consist primarily of investment-grade commercial paper, money market accounts and investments which, when purchased, have a maturity of 90 days or less. Short-term investments represent holdings in investment-grade commercial paper with a maturity at the time of purchase of greater than 90 days. Due to the current economic situation, we have intentionally reduced our holdings in Short-term investments.

In addition to our unrestricted cash and cash equivalents described above, we had restricted cash of $13.9 million at March 31, 2020 that was pledged or held as collateral in connection with workers' compensation requirements and certain other agreements. From time to time, such restricted funds could be returned to us or we could be required to pledge additional cash (see Note 12 of Notes to Interim Consolidated Financial Statements included in this Report).

We and certain of our subsidiaries have a credit agreement with Wells Fargo Bank, National Association, as administrative agent, and the other financial institutions party thereto ("Revolving Credit Facility") (see Note 6 of Notes to Interim Consolidated Financial Statements included in this Report). There were no borrowings under our Revolving Credit Facility as of March 31, 2020, or as of December 31, 2019.

Cash Flows

The following table summarizes our cash flows from operating, investing and financing activities for each period presented (in millions of dollars):



	Quarter Ended March 31,
	2020			2019
Total cash provided by (used in):
Operating activities	$	52.4		$	22.8
Investing activities	$	18.6		$	1.0
Financing activities	$	(28.5	)	$	(34.0	)

Cash provided by operating activities for the quarter ended March 31, 2020 reflected an increase in accounts payable of $21.7 million driven by increases in the quantity of metal purchases with an offsetting increase in inventory of $17.0 million partially to meet aerospace demand and partially due to our automotive customers temporarily curtailing operations late in the quarter.

Cash provided by operating activities for the quarter ended March 31, 2019 reflected: (i) an increase in inventory of $18.8 million due partially to the unplanned downtime in our Trentwood facility, as well as the transition of automotive programs and our preparation for furnace rebuilds at some of our extrusion facilities; (ii) an increase in trade and other receivables of $12.8 million reflecting a higher ratio of international shipments; and (iii) an increase in accounts payable of $7.4 million driven predominantly by the timing of metal purchases.

See Statements of Consolidated Cash Flows included in this Report for further details on our cash flows from operating, investing and financing activities for the quarters ended March 31, 2020 and March 31, 2019.

Sources of Liquidity

We believe our available cash and cash equivalents, short-term investments, borrowing availability under the Revolving Credit Facility and funds generated from operations are our most significant sources of liquidity and that our Revolving Credit Facility and unsecured notes have covenants that allow us to operate our business with limited restrictions and significant flexibility for the foreseeable future. While we believe these sources will be sufficient to finance our working capital requirements, planned capital expenditures, investments, debt service obligations and other cash requirements for at least the next twelve months, and while we also believe that alternative sources of liquidity will remain available in the event we seek to add liquidity for opportunistic or other reasons in the future, our ability to fund such cash requirements will depend upon our future operating performance (which will be affected by prevailing economic conditions) and financial, business and other factors, some of which are beyond our control.

We do not believe that covenants contained in the Revolving Credit Facility are reasonably likely to limit our ability to raise additional debt or equity should we choose to do so during the next 12 months, nor do we believe it is likely that during the next 12 months we will trigger the availability threshold that would require measuring and maintaining a fixed charge coverage ratio. At April 13, 2020, there were no borrowings under the Revolving Credit Facility.

See Note 9 of Notes to Consolidated Financial Statements included in our Annual Report on Form 10-K for the year ended December 31, 2019 for a description of our Revolving Credit Facility.

Debt

See "Contractual Obligations, Commercial Commitments and Off-Balance Sheet Arrangements – Contractual Obligations and Commercial Commitments" included in Part II, Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations" in our Annual Report on Form 10-K for the year ended December 31, 2019 for mandatory principal and cash interest payments on the outstanding borrowings.

We do not believe that covenants in the indenture governing the unsecured senior notes are likely to limit our ability to obtain additional debt or equity financing should we choose to do so during the next 12 months.

Capital Expenditures and Investments

We strive to strengthen our competitive position across our end markets through strategic capital investment. Significant investments over the past decade have positioned us well with increased capacity and expanded manufacturing capabilities while more recent capital projects have focused on further enhancing manufacturing cost efficiency, improving product quality and promoting operational security, which we believe are critical to maintaining and strengthening our position in an increasingly competitive market environment. A significant portion of our capital spending over the past several years related to the Trentwood modernization project, which has focused on equipment upgrades throughout the process flow to reduce conversion costs, increase efficiency and further improve our competitive cost position on all products produced at our Trentwood facility. In addition, a significant portion of the investment has also focused on modernizing legacy equipment and the process flow for thin gauge plate to achieve KaiserSelect® quality enhancements for these Aero/HS and GE products. These improvements have allowed us to gain incremental manufacturing capacity to enable future sales growth.

As a response to the COVID-19 pandemic and in order to preserve liquidity, at this time we are limiting capital spending to critical sustaining projects. Our spending outlook for the year is and will remain uncertain until we gain more clarity on the impacts of COVID-19 as well as post-pandemic economic conditions. Under normal circumstances, our sustaining capital expenditures over time would average $35.0 million to $40.0 million per year. However, with reduced activity levels, there is less wear on equipment, and we expect the level of sustaining capital expenditures will decline. Total capital expenditures were $21.1 million and $13.6 million for the quarters ended March 31, 2020 and March 31, 2019, respectively. The majority of our capital spending in both periods was allocated among our manufacturing locations on projects expected to reduce operating costs, improve product quality, expand capacity or enhance operational security.

With a view towards the longer-term demand growth of heat treat plate for applications in our aerospace and general engineering end markets, in February 2020 we announced a $375.0 million multi-year expansion project at our Trentwood facility that will provide increased capacity, redundancy, efficiency and operational security for key bottleneck operations in our

process flow. We will continue to monitor market conditions to determine the timing of the various modules contained within this strategic project, including the initial $145.0 million investment in a new heavy gauge plate stretcher at our Trentwood facility. Capital investments will be funded using cash generated from operations, available cash and cash equivalents, short-term investments, borrowings under the Revolving Credit Facility and/or other third-party financing arrangements. The level of anticipated capital expenditures may be adjusted from time to time depending on our business plans, our price outlook for fabricated aluminum products, our ability to maintain adequate liquidity and other factors. No assurance can be provided as to the timing of any such expenditures or the operational benefits expected therefrom.

Dividends

We have consistently paid a quarterly cash dividend since the second quarter of 2007 to holders of our common stock, including holders of restricted stock, and have increased the dividend in each year since 2011. Nevertheless, as in the past, the future declaration and payment of dividends, if any, will be at the discretion of our Board of Directors and will depend on a number of factors, including our financial and operating results, financial position and anticipated cash requirements and contractual restrictions under our Revolving Credit Facility, the indenture for our unsecured senior notes, or other indebtedness we may incur in the future. We can give no assurance that dividends will be declared and paid in the future. See Note 8 of Notes to Consolidated Financial Statements included in our Annual Report on Form 10-K for the year ended December 31, 2019 for additional information about restrictions on dividend payments contained in the Revolving Credit Facility and in the indenture for our unsecured senior notes.

We also pay quarterly dividend equivalents to the holders of certain restricted stock units. Holders of performance shares are not paid a quarterly dividend equivalent, but instead are entitled to receive, in connection with the issuance of underlying shares of common stock for performance shares that ultimately vest, a one-time payment equal to the dividends such holder would have received if the number of such shares of common stock so issued had been held of record by such holder from the date of grant of such performance shares through the date of such issuance.

See our Statements of Consolidated Stockholders' Equity and Note 14 of Notes to Interim Consolidated Financial Statements included in this Report for information regarding dividends paid during the quarters ended March 31, 2020 and March 31, 2019, and declared subsequent to March 31, 2020.

Repurchases of Common Stock

See our Statements of Consolidated Stockholders' Equity included in this Report for information regarding repurchases of common stock made during the quarters ended March 31, 2020 and March 31, 2019 and the amount authorized and available for future repurchases of common stock under our stock repurchase program.

See our Statements of Consolidated Stockholders' Equity included in this Report for information regarding minimum statutory tax withholding obligations arising during the quarters ended March 31, 2020 and March 31, 2019, in connection with the vesting of non-vested shares, restricted stock units and performance shares.

In response to prevailing economic conditions, we suspended repurchases of common stock as of March 18, 2020.

Environmental Commitments and Contingencies

See Note 7 of Notes to Interim Consolidated Financial Statements included in this Report for information regarding our environmental commitments and contingencies.

Contractual Obligations, Commercial Commitments and Off-Balance Sheet Arrangements

During the quarter ended March 31, 2020, we granted additional stock-based awards to executive officers, certain key employees and non-employee directors under our equity incentive plan. Additional awards are expected to be made in future years.

Except as otherwise disclosed herein, there has been no material change in our contractual obligations, commercial commitments or off-balance sheet arrangements other than in the ordinary course of business since December 31, 2019.

Critical Accounting Estimates and Policies

Our consolidated financial statements are prepared in accordance with GAAP. In connection with the preparation of our financial statements, we are required to make assumptions and estimates about future events and apply judgments that affect the reported amounts of assets, liabilities, revenue and expenses and the related disclosures. We base our assumptions, estimates and judgments on historical experience, current trends and other factors that management believes to be relevant at the time our consolidated financial statements are prepared. On a regular basis, management reviews the accounting policies, assumptions, estimates and judgments to ensure that our financial statements are presented fairly and in accordance with GAAP. However, because future events and their effects cannot be determined with certainty, actual results could differ from our assumptions and estimates and such differences could be material.

Our significant accounting policies are discussed in Note 1 of Notes to Consolidated Financial Statements included in our Annual Report on Form 10-K for the year ended December 31, 2019. We discuss our critical accounting estimates in Part II, Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations" of our Annual Report on Form 10-K for the year ended December 31, 2019.

There have been no other material changes in our critical accounting estimates and policies since December 31, 2019.

New Accounting Pronouncements

For a discussion of recently adopted and recently issued but not yet adopted accounting pronouncements, see "New Accounting Pronouncements" in Note 1 of Notes to Interim Consolidated Financial Statements included in this Report.

Available Information

Our website is located at www.kaiseraluminum.com. The website includes a section for investor relations under which we provide notifications of news or announcements regarding our financial performance, including Securities and Exchange Commission ("SEC") filings, investor events and press and earnings releases. In addition, all Kaiser Aluminum Corporation filings submitted to the SEC, including our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and Proxy Statements for our annual meeting of stockholders, as well as other Kaiser Aluminum Corporation reports and statements, are available on the SEC's web site at www.sec.gov. Such filings are also available for download free of charge on our website. In addition, we provide and archive on our website webcasts of our quarterly earnings calls and certain events in which management participates or hosts with members of the investment community, and related investor presentations. The contents of the website are not intended to be incorporated by reference into this Report or any other report or document filed by us, and any reference to the websites are intended to be inactive textual references only.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Our operating results are sensitive to changes in the prices of primary aluminum, certain alloying metals, natural gas, electricity and foreign currency, and also depend to a significant degree upon the volume and mix of products sold to customers. As discussed more fully in Note 5 of Notes to Interim Consolidated Financial Statements included in this Report, we have historically utilized hedging transactions to lock in a specified price or range of prices for certain products which we sell or consume in our production process, and to mitigate our exposure to changes in energy prices.

Aluminum

See Note 5 of Notes to Interim Consolidated Financial Statements included in this Report for a discussion of our pricing of fabricated aluminum, firm-price arrangements and third-party hedging instruments.

During the quarters ended March 31, 2020 and March 31, 2019, settlements of derivative contracts covering 43.3 million pounds and 53.0 million pounds, respectively, hedged shipments sold on pricing terms that created metal price risk for us. At March 31, 2020, we had derivative contracts with respect to approximately 69.7 million pounds, 23.8 million pounds and 21.0 million pounds to hedge sales to be made in the remainder of 2020, 2021 and 2022, respectively, on pricing terms that create metal price risk for us.

Based on the aluminum derivative positions held by us to hedge firm-price customer sales agreements, we estimate that a $0.10 per pound decrease in the London Metal Exchange ("LME") market price of aluminum as of March 31, 2020 and

December 31, 2019, with all other variables held constant, would have resulted in an unrealized mark-to-market loss of $11.5 million and $10.4 million, respectively, with corresponding changes to the net fair value of our aluminum derivative positions. Additionally, we estimate that a $0.01 per pound decrease in the Midwest premium for aluminum as of March 31, 2020 and December 31, 2019, with all other variables held constant, would have resulted in an unrealized mark-to-market loss of $1.1 million and $0.9 million, respectively, with corresponding changes to the net fair value of our aluminum derivative positions.

Alloying Metals

We are exposed to the risk of fluctuating prices of certain alloying metals, especially copper and zinc, to the extent that changes in their prices do not highly correlate with price changes for aluminum. Copper, zinc and certain other metals are used in our remelt operations to cast rolling ingot and extrusion billet with the proper chemistry for our products. From time to time, we enter into forward contract swaps with third parties to mitigate our risk from fluctuations in the prices of copper and zinc ("Alloying Metals"). As of March 31, 2020, we had forward swap contracts with settlement dates designed to align with the timing of scheduled purchases of Alloying Metals by our manufacturing facilities. See Note 5 of Notes to Interim Consolidated Financial Statements included in this Report for additional information relating to these hedges. We estimate that a $0.10 per pound decrease in the LME market price of zinc as of March 31, 2020 and December 31, 2019, with all other variables held constant, would have resulted in an unrealized mark-to-market loss of $1.1 million and $1.0 million, respectively, with corresponding changes to the net fair value of our Alloying Metals hedges. We estimate that a $0.10 per pound decrease in the Commodity Exchange, Inc. market price of copper, with all other variables held constant, would have resulted in an unrealized mark-to-market loss of $0.6 million as of both March 31, 2020 and December 31, 2019, with corresponding changes to the net fair value of our Alloying Metals hedges.

Energy

We are exposed to risk of fluctuating prices for natural gas and electricity. We, from time to time, in the ordinary course of business, enter into hedging transactions and/or physical delivery commitments with firm prices with third parties to mitigate our risk from fluctuations in natural gas and electricity prices.

See Note 5 of Notes to Interim Consolidated Financial Statements included in this Report for information regarding the volume of our derivative and physical delivery commitments with energy companies in place to cover our exposure to fluctuations in natural gas and electricity prices as of March 31, 2020. We estimate that a $1.00 per mmbtu decrease in natural gas prices would have resulted in an unrealized mark-to-market loss of $8.0 million and $8.6 million as of March 31, 2020 and December 31, 2019, respectively, with corresponding changes to the net fair value of our natural gas derivative positions. We estimate that a $5.00 per Mwh decrease in electricity prices as of March 31, 2020 and December 31, 2019 would have resulted in an unrealized mark-to-market loss of $3.1 million and $2.4 million, respectively, with corresponding changes to the net fair value of our electricity derivative positions.

Foreign Currency

See Note 5 and Note 8 of Notes to Consolidated Financial Statements included in this Report for information relating to foreign currency forward contracts. As of March 31, 2020, we hedged our equipment purchase transactions denominated in euros using fair value contracts with settlement dates through May 2022. We estimate that a 10% decrease in the March 31, 2020 exchange rate of euros to US dollars would have resulted in an unrealized mark-to-market loss of $3.8 million with corresponding changes to the net fair value of our foreign currency derivative positions. As of December 31, 2019, we had an immaterial, non-designated hedge of a euro denominated firm-commitment to purchase equipment that settled in January 2020.

Item 4. Controls and Procedures

Evaluation of Disclosure Controls and Procedures. We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Securities Exchange Act of 1934 is processed, recorded, summarized and reported within the time periods specified in the SEC's rules and forms and that such information is accumulated and communicated to management, including the principal executive officer and principal financial officer, to allow for timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. An evaluation of the effectiveness of the design and

operation of our disclosure controls and procedures was performed as of the end of the period covered by this Report under the supervision of and with the participation of our management, including the principal executive officer and principal financial officer. Based on that evaluation, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were effective as of March 31, 2020 at the reasonable assurance level.

Changes in Internal Control Over Financial Reporting. We had no changes in our internal control over financial reporting during the quarter ended March 31, 2020 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART II – OTHER INFORMATION

Item 1. Legal Proceedings

Reference is made to Part I, Item 3. "Legal Proceedings" included in our Annual Report on Form 10-K for the year ended December 31, 2019 for information concerning material legal proceedings with respect to the Company. There have been no material developments since December 31, 2019.

Item 1A. Risk Factors

Reference is made to Part I, Item 1A. "Risk Factors" included in our Annual Report on Form 10-K for the year ended December 31, 2019 for information concerning risk factors. In addition to the risk factors discussed below, the impact of the Coronavirus Disease 2019 ("COVID-19") may also exacerbate other risks discussed in Item 1A. Risk Factors in our Annual Report on Form 10-K, any of which could have a material effect on us.

The COVID-19 outbreak has impacted and could in the future materially and adversely affect our business.

The novel strain of the coronavirus identified in China in late 2019 and now affecting the global community has impacted and is expected to continue to impact our operations, and the full nature and extent of the impact is highly uncertain and may be beyond our control. Among other things, uncertainties relating to COVID-19 include the duration of the outbreak, the severity of the virus, and the actions, or perception of actions that may be taken, to contain or treat its impact, by governments and others, including declarations of states of emergency, business closures, manufacturing restrictions and a prolonged period of travel, commercial and/or other similar restrictions and limitations.

Furthermore, as a result of COVID-19 and the measures implemented that are designed to contain its spread, our customers, have been and could continue to be negatively impacted as a result of disruption in demand, which could negatively impact our sales and have a material adverse effect on our business, results of operations and financial condition. Similarly, as a result of COVID-19 and measures implemented that are designed to contain its spread, our suppliers may not have the materials, capacity, or capability to enable the manufacture of our products according to our schedule and specifications. Because of impacts to suppliers' operations, we may need to seek alternate suppliers, which may be more expensive, may not be available or may result in delays in shipments to us and subsequently to our customers, each of which would affect our results of operations.

The COVID-19 pandemic has also disrupted our internal operations, including by heightening the risk that a significant portion of our workforce will suffer illness or otherwise not be permitted or be unable to work and exposing us to cyber and other risks associated with a large number of our employees working remotely. Certain of our facilities have experienced temporary work disruptions as a result of the COVID-19 pandemic, and we cannot predict whether these will continue or our facilities will experience more significant or frequent disruptions in the future. Furthermore, we may need to reduce our workforce as a result of declines in our business caused by the COVID-19 pandemic, and any such reduction would cause us to incur costs. Moreover, there can be no assurance that we would be able to rehire our workforce in the event our business experiences a subsequent recovery.

The impact of the COVID-19 pandemic continues to evolve and its duration and ultimate disruption to our customers and to our supply chain, and related financial impact to us, cannot be estimated at this time. Should such disruption continue for an extended period of time, the impact could have a more severe adverse effect on our business, results of operations and financial condition. Additionally, weaker economic conditions generally could result in impairment in value of our tangible or intangible assets, or our ability to raise additional capital, if needed.

On March 27, 2020, President Trump signed into law the Coronavirus Aid, Relief and Economic Security Act ("CARES Act"). The CARES Act, among other things, includes provisions relating to refundable payroll tax credits, deferment of employer side social security payments, net operating loss carryback periods, alternative minimum tax credit refunds, modifications to the net interest deduction limitations and technical corrections to tax depreciation methods for qualified improvement property. Although we continue to examine the impacts the CARES Act may have on our business, results of operations, financial condition and liquidity, it is currently unclear if and how we will benefit from the CARES Act.

The COVID-19 pandemic could cause downturns in the commercial aerospace industry and/or the automotive and ground transportation industries, which could adversely affect our business.

We derive a significant portion of our revenue from products sold to the aerospace and automotive and ground transportation industries. Concerns regarding and measures implemented in response to pandemics of infectious disease have and could further cause changes in global travel patterns, negatively influencing demand for new commercial aircraft and other vehicles, resulting in cancellations or deferrals of orders and/or decreases in new deliveries. Moreover, because new automotive vehicle demand is tied closely to overall economic strength, economic uncertainty and/or increased unemployment that results from the COVID-19 pandemic or measures undertaken in response could lead to weak demand for, or lower production of, new cars, light trucks, SUVs and heavy duty vehicles and trailers, which, in turn could adversely affect demand for our products. For example, several of our automotive customers have temporarily suspended operations in response to the COVID-19 pandemic and/or in accordance with governmental requirements. Despite existing backlogs, adverse developments resulting from the pandemic may lead to reduced demand for our products, which could adversely affect our financial position, results of operations and cash flows.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

The following table provides information regarding our repurchases of our common shares during the quarter ended March 31, 2020:



	Equity Incentive Plan			Stock Repurchase Plan
	Total Number of Shares Purchased¹	Average Price per Share		Total Number of Shares Purchased²	Average Price per Share		Maximum Dollar Value of Shares that May Yet Be Purchased Under the Programs (millions)²
January 1, 2020 - January 31, 2020	—	$	—	9,360	$	103.25	$	104.6
February 1, 2020 - February 29, 2020	—	—		11,676	102.07		$	103.5
March 1, 2020 - March 31, 2020	45,545	93.22		131,727	78.64		$	93.1
Total	45,545	$	93.22	152,763	$	81.94	N/A

____________________

Under our equity incentive plan, participants may elect to have us withhold common shares to satisfy minimum statutory tax withholding obligations arising from the recognition of income and the vesting of restricted stock, restricted stock units and performance shares. When we withhold these shares, we are required to remit to the appropriate taxing authorities the market price of the shares withheld by us on the date of withholding. The withholding of common shares by us could be deemed a purchase of such common shares.

In April 2017, we announced that our Board of Directors authorized us to repurchase an indeterminate number of shares of our common stock at an aggregate market value of up to $100.0 million. In September 2018, our Board of Directors authorized us to repurchase an indeterminate number of shares of our common stock at an aggregate market value of up to $100.0 million. The September 2018 authorization was in addition to the share repurchase amount authorized in April 2017. Neither authorization has an expiration date.

See Note 9 of Notes to Consolidated Financial Statements included in our Annual Report on Form 10-K for the year ended December 31, 2019 for information about restrictions on dividend payments contained in the Revolving Credit Facility and in the indenture for our Senior Notes.

Item 3. Defaults Upon Senior Securities

None.

Item 4. Mine Safety Disclosures

Not applicable.

Item 5. Other Information

None.

Item 6. Exhibits



Exhibit Number		Description

10.1		Kaiser Aluminum Fabricated Products 2020 Short-Term Incentive Plan For Key Managers Summary (incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K, filed by the Company on March 10, 2020, File No. 001-09447).

10.2		2020 Form of Executive Officer Restricted Stock Units Award Agreement (incorporated by reference to Exhibit 10.2 to the Current Report on Form 8-K, filed by the Company on March 10, 2020, File No. 001-09447).

10.3		2020 Form of Executive Officer Performance Shares Award Agreement (incorporated by reference to Exhibit 10.3 to the Current Report on Form 8-K, filed by the Company on March 10, 2020, File No. 001-09447).

10.4		Kaiser Aluminum Corporation 2020 - 2022 Long-Term Incentive Plan Management Objectives and Formula for Determining Performance Shares Earned Summary (incorporated by reference to Exhibit 10.4 to the Current Report on Form 8-K, filed by the Company on March 10, 2020, File No. 001-09447).

*31.1		Certification of Jack A. Hockema pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

*31.2		Certification of Neal E. West pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

*32.1		Certification of Jack A. Hockema pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

*32.2		Certification of Neal E. West pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

* 101.INS		XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.

* 101.SCH		XBRL Taxonomy Extension Schema

* 101.CAL		XBRL Taxonomy Extension Calculation

* 101.DEF		XBRL Taxonomy Extension Definition

* 101.LAB		XBRL Taxonomy Extension Label

* 101.PRE		XBRL Taxonomy Extension Presentation

* 104		Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101).


*	Filed herewith.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this Report to be signed on its behalf by the undersigned thereunto duly authorized.



	KAISER ALUMINUM CORPORATION


	/s/ Neal E. West
	Neal E. West
	Senior Vice President and Chief Financial Officer (Principal Financial Officer)


	/s/ Jennifer Huey
	Jennifer Huey
	Vice President and Chief Accounting Officer (Principal Accounting Officer)

Date: April 20, 2020

Positive
Negative
Uncertain
Constraining
Legalese
Litigous
Readability	H.S. sophomore Avg

Finance Leases

Operating Leases

Weighted-average lease term (in years)

Weighted-average discount rate