Regal Rexnord (RRX) 10-K2023 FY Annual report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

        

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2023

Commission File number 1-7283

REGAL REXNORD CORPORATION

(Exact Name of Registrant as Specified in Its Charter)

(Address of principal executive offices)

(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

REGAL REXNORD CORPORATION

ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

Unless the context requires otherwise, references in this Annual Report on Form 10-K to “we,” “us,” “our” or the “Company” refer collectively to Regal Rexnord Corporation and its subsidiaries.

References in an Item of this Annual Report on Form 10-K to information contained in the 2024 Proxy Statement, or to information contained in specific sections of the 2024 Proxy Statement, incorporate the information into that Item by reference.

Effective for fiscal year 2022, we approved a change in the fiscal year end from a 52/53 week fiscal year ending on the Saturday closest to December 31 to a fiscal year ending on December 31. We refer to the fiscal year ended December 31, 2023 as “fiscal 2023", the fiscal year ended December 31, 2022 as “fiscal 2022" and the fiscal year ended January 1, 2022 as “fiscal 2021".

ITEM 1 - BUSINESS

Our Company

Regal Rexnord Corporation (NYSE: RRX) is a global leader in the engineering and manufacturing of factory automation sub-systems, industrial powertrain solutions, automation and mechanical power transmission components, electric motors and electronic controls, air moving products and specialty electrical components and systems, serving customers around the world. Through longstanding technology leadership and an intentional focus on producing more energy-efficient products and systems, we help create a better tomorrow – for our customers and for the planet. We are headquartered in Milwaukee, Wisconsin and have manufacturing, sales and service facilities worldwide.

Our Company is comprised of four operating segments: Industrial Powertrain Solutions ("IPS"), Power Efficiency Solutions ("PES"), Automation & Motion Control ("AMC") and Industrial Systems. Effective during the first quarter of 2023, in conjunction with the Altra Transaction (as defined in the Acquisitions section below), we realigned our four operating segments with the change to our management structure and operating model. See Note 6 - Segment Information of the Notes to the Consolidated Financial Statements for further information.

A description of our four operating segments is as follows:

On September 23, 2023, we signed an agreement to sell our industrial motors and generators businesses, which represent the majority of the Industrial Systems operating segment, for total consideration of $400 million plus cash transferred at close, subject to working capital and other customary purchase price adjustments. This transaction is expected to close in the first half of 2024. The assets and liabilities related to these businesses have been reclassified to Assets Held for Sale, Noncurrent Assets Held for Sale, Liabilities Held for Sale and Noncurrent Liabilities Held for Sale on the Company's Consolidated Balance Sheet as of December 31, 2023. The sale of the industrial motors and generators businesses does not represent a strategic shift that will have a major effect on our operations and financial results and, therefore, did not qualify for presentation as discontinued operations. See Note 4 - Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for further information.

Strategy

The Company seeks to create value for its key stakeholders – its customers, its shareholders and its associates – by accelerating profitable growth, raising our margins, generating more cash and increasing our return on invested capital. We also plan to create significant value for stakeholders by deploying excess capital towards maintaining a strong balance sheet and, over time, funding highly synergistic M&A activities. The primary aspects of our strategy to achieve our value creation objectives include:

Acquisitions

On October 26, 2022, we entered into an Agreement and Plan of Merger (the “Altra Merger Agreement”) by and among us, Altra Industrial Motion Corp., a Delaware corporation (“Altra”), and Aspen Sub, Inc., a Delaware corporation and our wholly owned subsidiary (“Merger Sub”). Altra is a leading global manufacturer of highly-engineered products and sub-systems in the factory automation and industrial power transmission markets. Regal Rexnord entered into the Altra Merger Agreement because it believes it can recognize substantial revenue and cost synergies through the combination. In particular, Altra transforms Regal Rexnord's automation portfolio into a global provider with significant sales into markets with secular growth characteristics. Altra also adds significant capabilities to Regal Rexnord's industrial power transmission portfolio, in particular in clutches and brakes, allowing it to provide a broader offering, and more robust industrial powertrain solutions to its customers.

On March 27, 2023, in accordance with the terms and conditions of the Altra Merger Agreement, Merger Sub merged with and into Altra (the "Altra Merger"), with Altra surviving the Altra Merger as a wholly owned subsidiary of the Company (the “Altra Transaction”). The preliminary purchase price for the acquisition of Altra was approximately $5.1 billion, subject to the finalization of purchase accounting. See Item 7 – Management's Discussion and Analysis of Financial Condition and Results of Operations and Note 4 – Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for additional information regarding the Altra Transaction.

On October 4, 2021, in accordance with the terms and conditions of the Agreement and Plan of Merger, dated as of February 15, 2021 (the “Rexnord PMC Merger Agreement”), we completed our combination with the Rexnord PMC business of Zurn Water Solutions Corporation (formerly known as Rexnord Corporation) ("Zurn") in a Reverse Morris Trust transaction (the “Rexnord Transaction”). Pursuant to the Rexnord Transaction, (i) Zurn transferred to its then-subsidiary Land Newco, Inc. (“Land”) substantially all of the assets, and Land assumed substantially all of the liabilities, of the Rexnord PMC business (the “Reorganization”), (ii) after which all of the issued and outstanding shares of Land common stock held by a subsidiary of Zurn were distributed in a series of distributions to Zurn’s stockholders (the “Distributions”, and the final distribution of Land common stock from Zurn to Zurn’s stockholders, which was made pro rata for no consideration, the “Spin-Off”) and (iii) immediately after the Spin-Off, one of our subsidiaries merged with and into Land.

The total consideration transferred in connection with the Rexnord Transaction was approximately $4.0 billion. See Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 4 – Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for additional information regarding the Rexnord Transaction.

On November 23, 2021, we acquired Arrowhead Systems, LLC ("Arrowhead") for $315.6 million in cash, net of $1.1 million of cash acquired (the “Arrowhead Transaction”). The Arrowhead business is now part of the Automation & Motion Control segment. See Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 4 – Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for additional information regarding the Arrowhead Transaction.

We sell our products directly to original equipment manufacturers ("OEMs"), distributors and end-users. We have multiple divisions that promote our brands across their respective sales organizations. These sales organizations consist of varying combinations of our own internal direct sales people as well as exclusive and non-exclusive manufacturers' representative organizations.

We operate large distribution facilities in Plainfield, Indiana; El Paso and McAllen, Texas; LaVergne, Tennessee; Florence, Kentucky; and Monterrey, Mexico which serve as hubs for our North American distribution and logistics operations. Products are shipped from these facilities to our customers utilizing common carriers. We also operate or partner with numerous warehouse and distribution facilities in our global markets to service the needs of our customers. In addition, we have select manufacturer representatives' warehouses located in specific geographic areas to serve local customers.

We derive a significant portion of revenue from our OEM customers. Certain portions of our sales are to key OEM customers which makes our relationship with each of these customers important to our business. We have long standing relationships with these customers and we expect these customer relationships will continue for the foreseeable future. Despite this relative concentration, we had no customer that accounted for more than 10% of our consolidated net sales in fiscal 2023, fiscal 2022 or fiscal 2021.

Electric motor and electronic drive manufacturing is a highly competitive global industry in which there is emphasis on quality, reliability, and technological capabilities such as energy efficiency, delivery performance, price and service. We compete with a large number of domestic and international competitors due in part to the nature of the products we manufacture and the wide variety of applications and customers we serve. Many manufacturers of electric motors and drives operate production facilities globally, producing products for both the US domestic and export markets. Global electric motor manufacturers, particularly those located in Europe, Japan, China, India and elsewhere in Asia, compete with us as they attempt to expand their market penetration around the world, especially in North America.

These markets are fragmented. Many competitors in these markets offer limited product lines or serve specific applications, industries or geographic markets. Other larger competitors offer broader product lines that serve multiple end uses in multiple geographies. Competition in these segments is based on several factors including quality, lead times, custom engineering capability, pricing, reliability, and customer and engineering support.

We believe that innovation is critical to our future growth and success and are committed to investing in new products, technologies and processes that deliver real value to our customers. Our research and development expenses consist primarily of costs for (i) salaries and related personnel expenses; (ii) the design and development of new energy efficiency products and enhancements; (iii) quality assurance and testing; and (iv) other related overhead. Our research and development efforts tend to be targeted toward developing new products that would allow us to gain additional market share, whether in new or existing segments.

We believe the key driver of our innovation strategy is the development of products that include energy efficiency, embedded intelligence and variable speed technology solutions. With our emphasis on product development and innovation, our

businesses filed 38 Non-Provisional United States ("US") patents, 5 Provisional US patents and an additional 63 Non-Provisional foreign patents in fiscal 2023.

Each of our business units has its own, as well as shared, product development and design teams that continuously work to enhance our existing products and develop new products for our growing base of customers that require custom and standard solutions. We believe we have state-of-the-art product development and testing laboratories. We believe these capabilities provide a significant competitive advantage in the development of high quality motors, electric generators, and mechanical products incorporating leading design characteristics such as low vibration, low noise, improved safety, reliability, sustainability and enhanced energy efficiency. Increasingly, our research and development and other engineering efforts have focused on smart products that communicate and allow for monitoring, diagnostics and predictive maintenance.

We own a number of US patents and foreign patents relating to our businesses. While we believe that our patents provide certain competitive advantages, we do not consider any one patent or group of patents essential to our business as a whole. We also use various registered and unregistered trademarks, and we believe these trademarks are significant in the marketing of most of our products. However, we believe the successful manufacture and sale of our products generally depends more upon our technological, manufacturing and marketing skills.

We have developed and acquired global operations in locations such as Mexico, China, India and Europe so that we can sell our products in these markets, follow our multinational customers, take advantage of global talent and complement our flexible, rapid response operations in the US and Canada. Our vertically integrated manufacturing operations, including our own aluminum die casting and steel stamping operations, are an important element of our rapid response capabilities. In addition, we have an extensive internal logistics operation and a network of distribution facilities with the capability to modify stock products to quickly meet specific customer requirements. This gives us the ability to efficiently and promptly deliver a customer's unique product to the desired location.

We manufacture a majority of the products that we sell, but also strategically source components and finished goods from an established global network of suppliers. We strategically leverage a global supply chain to reduce our overall costs and lead-time. We generally maintain a dual sourcing capability to ensure a reliable supply source for our customers, although we do depend on a limited number of single source suppliers for certain materials and components. We regularly invest in machinery and equipment to improve and maintain our facilities. Base materials for our products consist primarily of steel, copper and aluminum. Additionally, significant components of our product costs consist of bearings, plastic, electronic assemblies, electronic components, permanent magnets and ferrous and non-ferrous castings.

The Regal Rexnord Business System is our enterprise-wide framework for continuous improvement. With our corporate values as its foundation, the Regal Rexnord Business System enables effective goal alignment, collaborative problem solving and sharing of best practices, tools, skills and expertise to achieve our objectives. Through relentless commitment to continuous improvement, we strive to elevate safety, quality, delivery, cost and growth performance of the business with the goal of exceeding the expectations of our customers, our associates and our shareholders.

We have manufacturing, sales and service facilities in the US, Mexico, China, Europe, India, Thailand, and Australia, as well as a number of other locations throughout the world.

Our Industrial Powertrain Solutions segment currently includes 159 manufacturing, service, office and distribution facilities of which 58 are principal manufacturing facilities and 29 are principal warehouse facilities. The Industrial Powertrain Solutions segment's present operating facilities contain a total of approximately 11.5 million square feet of space, of which approximately 30% are leased.

Our Power Efficiency Solutions segment currently includes 67 manufacturing, service, office and distribution facilities, of which 21 are principal manufacturing facilities and 10 are principal warehouse facilities. The Power Efficiency Solutions segment's present operating facilities contain a total of approximately 5.2 million square feet of space, of which approximately 34% are leased.

Our Automation & Motion Control segment includes 68 manufacturing, service, office and distribution facilities, of which 25 are principal manufacturing facilities and 16 are principal warehouse facilities. The Automation & Motion Control segment's present operating facilities contain a total of approximately 2.6 million square feet of space, of which approximately 72% are leased.

Our Industrial Systems segment currently includes 29 manufacturing, service, office and distribution facilities of which 12 are principal manufacturing facilities and 7 are principal warehouse facilities. The Industrial Systems segment's present operating facilities contain a total of approximately 3.2 million square feet of space, of which approximately 39% are leased.

Our corporate offices are located in Milwaukee, Wisconsin in an approximately 142,000 square foot rented office building and in Rosemont, Illinois in an approximately 20,000 square foot rented office building. We believe our equipment and facilities are well maintained and adequate for our present needs. However, we continuously evaluate our property portfolio, including properties that have been or will be transferred to us pursuant to acquisitions, to ensure that our facilities are being used efficiently.

Our business units have historically shipped the majority of their products within a month from when the order was received. As of December 31, 2023, our backlog was $1,884.4 million, as compared to $1,242.7 million on December 31, 2022. We believe that a majority of our backlog will be shipped in fiscal 2024.

At the end of fiscal 2023, we employed approximately 32,100 full-time associates worldwide. Of those associates, approximately 9,400 were located in the US; approximately 8,900 in Mexico; approximately 3,200 in China; approximately 2,900 in India; and approximately 7,700 in the rest of the world.

We feel that our associates are our most valuable assets and consider our associate relations to be very good. Our objective is to create a high-performing organization by attracting and retaining high-quality, diverse talent and creating an environment in which all associates have the opportunity to reach their full potential.

The core goal of our performance management process is to develop and maintain a high-performing organization that is positioned to meet our business objectives. Creating a high-performing organization requires associates and managers to exhibit transparency in their day-to-day interactions, and use data to drive decision-making and accountability. Our performance management process focuses on enabling associates and managers to gain alignment through:

In addition to our focus on performance, we also have a strong commitment to our company values of integrity, responsibility, diversity and inclusion, customer success, innovation with purpose, continuous improvement, performance, and a passion to win, all with a sense of urgency. We regularly promote these values from the top down. In addition to instilling our corporate values as a key part of associate life, we promote a commitment to ethics and compliance among our workforce through our Code of Business Conduct and Ethics (our "Code"). In 2023, 97.9% of our global employees completed training on our Code during our annual training period.

As mentioned above, diversity and inclusion are rooted in our company values. We believe that we are at our best when we bring to bear the unique perspectives, experiences, backgrounds and ideas of our associates. We seek a workforce that reflects the communities in which we operate, and strive to create diverse, equal and inclusive workplaces where all of our associates have the opportunity to achieve their full potential. In 2021, as a sign of our commitment to this goal, we joined the CEO Action for Diversity and Inclusion, which is the largest CEO-driven organization committed to diversity and inclusion in the workplace, and also signed the National Association of Manufacturers Pledge for Action to cement our commitment to advancing justice, equality and opportunity for all people of color. In 2022, we heightened our efforts by investing in resources

to build a robust Diversity, Engagement & Inclusion ("DEI") team and have since expanded our leadership team in support of these efforts.

We are also committed to improving the health and well-being of our associates. Our US wellness program was established in 2008 and is continuously evolving to better educate, motivate and reward our associates for maintaining and achieving healthy measures. During our wellness plan year running from October 1, 2022 through September 30, 2023, 60% of our US associates participated in on-site biometric screening that provides them with key metrics such as BMI, blood pressure, and triglyceride, cholesterol and blood glucose levels. This represents an increase of 1% compared with our prior wellness plan year.

As a company, we believe that our value of responsibility requires community engagement, and we encourage our associates to share in our commitment to the communities where we operate. In addition to the numerous local community service projects in which our associate participate, we have an established charitable foundation for the purpose of coordinating financial donations to local charities. Our annual charitable giving is administered by an advisory board comprised of our associates. In 2023, the Company and the Company's Charitable Foundation allocated $1.2 million to support charitable organizations in the communities where our associates live and work globally. Disbursement of the remainder of the 2023 charitable commitment is ongoing. The amount we committed internationally in 2023 (predominantly in Mexico given the high concentration of our associates there) represented approximately 32% of our overall contributions.

Environmental Matters

We believe that positive environmental, social and governance ("ESG")-related business practices strengthen our Company by helping us better serve our customers, delivering higher returns for our shareholders, creating more opportunities for our associates, and making meaningful contributions to the communities in which we operate. In the realm of environmental impact, we have committed to setting both near-term emissions reduction targets, and net-zero targets. In 2022, we announced our commitment to achieving carbon emission neutrality in our operations across scopes 1 and 2 by 2032, and net-zero across scopes 1, 2, and 3 by 2050. Our focus has been on improving our environmental data reporting and accuracy, outlining a strategy to achieve our environmental impact goals, defining the relevant metrics to track our progress, and establishing a robust governance structure to help drive accountability.

Information About Our Executive Officers

The names, ages, and positions of our executive officers as of February 26, 2024 are listed below along with their business experience during the past five years. Officers are elected annually by the Company's Board of Directors (the "Board"). There are no family relationships among these officers, nor any arrangements or understanding between any officer and any other persons pursuant to which the officer was elected.

Our Internet address is www.regalrexnord.com. We make available free of charge (other than an investor's own Internet access charges) through our Internet website our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to those reports, as soon as reasonably practicable after we electronically file such material with, or furnish such material to, the Securities and Exchange Commission. In addition, we have adopted a Code of Business Conduct and Ethics that applies to our officers, directors and associates which satisfies the requirements of the New York Stock Exchange regarding a “code of business conduct.” We have also adopted Corporate Governance Guidelines addressing the subjects required by the New York Stock Exchange. In December 2023, we produced our updated Sustainability Report. We make copies of the foregoing, as well as the charters of our Board committees, available free of charge on our website. We intend to satisfy the disclosure requirements under Item 5.05 of Form 8-K regarding amendments to, or waivers from, our Code of Business Conduct and Ethics by posting such information on our web site at the address stated above. We are not including the information contained on or available through our website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K.

We are dependent on a single or limited number of suppliers for some materials or components required in the manufacture of our products. If any of those suppliers fail to meet their commitments to us in terms of delivery or quality, including by suffering any disruptions at its facilities or in its supply, we may experience cost increases or supply shortages that could result in our inability to meet our customers' requirements, or could otherwise experience an interruption in our operations that could negatively impact our business and results of operations. If we encounter significant supply interruptions, our competitive position could be adversely affected, which may result in depressed sales and profitability.

Additionally, the effects of climate change, including extreme weather events, long-term changes in temperature levels, water availability, supply costs impacted by increasing energy costs, or energy costs impacted by carbon prices or offsets may exacerbate supply chain constraints and disruption. Resulting supply chain constraints have required, and may continue to require, in certain instances, alternative delivery arrangements and increased costs and could have a material adverse effect on our business and operations.

Many of the products we produce contain key materials such as steel, copper, aluminum and electronics. Market prices for those materials can be volatile due to changes in supply and demand, manufacturing and other costs, regulations and tariffs, economic conditions and other circumstances. We may not be able to offset any increase in commodity costs through pricing actions, productivity enhancements or other means, and increasing commodity costs may have an adverse impact on our gross margins, which could adversely affect our results of operations and financial condition. Even if we are able to successfully respond to increased commodity costs through pricing actions, our competitive position could be adversely affected, which may result in depressed sales and profitability.

We may incur costs and charges as a result of restructuring activities and business optimization initiatives and operations consolidations that may be disruptive to our business and may not result in anticipated cost savings.

We expect to continue reviewing our overall manufacturing footprint and margin improvement initiatives in our operations, in an effort to make our business more efficient. We expect to incur additional costs and restructuring charges in connection with such consolidations, divestitures, workforce reductions and other cost reduction measures that could adversely affect our future earnings and cash flows. Furthermore, such actions may be disruptive to our business. This may result in production inefficiencies, product quality issues, late product deliveries or lost orders as we begin production at consolidated facilities, which would adversely impact our sales levels, operating results and operating margins. In addition, we may not realize the cost savings that we expect to realize as a result of such actions.

These activities require substantial management time and attention and may divert management from other important work or result in a failure to meet operational targets. Divestitures may also give rise to obligations to buyers or other parties that could have a financial effect after the transaction is completed. Moreover, we could encounter changes to, or delays in executing, any restructuring or divestiture plans, any of which could cause disruption and additional unanticipated expense.

The electric motor drives and controls, power generation and power transmission industries in recent years have seen significant evolution and innovation, particularly with respect to increasing energy efficiency and control enhancements. Our ability to effectively compete in these industries depends in part on our ability to continue to develop new technologies and innovative products, new manufacturing techniques and product enhancements, including enhancements based on technological innovation such as IoT and AI. Further, many large customers in these industries generally desire to purchase from companies that can offer a broad product range, which means we must continue to develop our expertise in order to design, manufacture and sell these products successfully. This requires that we make significant investments in engineering, manufacturing, customer service and support, research and development and intellectual property protection, and there can be no assurance that in the future we will have sufficient resources to continue to make such investments. If we are unable to meet the needs of our customers for innovative products or product variety, or if our products become technologically obsolete over time due to the development by our competitors of technological breakthroughs or otherwise, our revenues and results of operations may be adversely affected. In addition, we may incur significant costs and devote significant resources to the development of products that ultimately are not accepted in the marketplace, do not provide anticipated enhancements, or do not lead to significant revenue, which may adversely impact our results of operations.

Further, such new products and technologies may create additional exposure or risk. We cannot assure that we can adequately protect any of our own technological developments to produce a sustainable competitive advantage. Furthermore, we could be subject to business continuity risk in the event of an unexpected loss of a material facility or operation. We cannot ensure that we can adequately protect against such a loss.

We depend on, and expect to continue to depend on, revenues from several significant OEM customers and distributors, and any loss, cancellation or reduction of, or delay in, purchases by these customers or distributors may have a material adverse effect on our business.

Our success depends on our continued ability to develop and manage these relationships. We have longstanding relationships with these customers and distributors and we expect these relationships will continue for the foreseeable future. Our reliance on these sales makes our relationships important to our business. We cannot assure you that we will be able to retain these key customers and distributor relationships. Some of our customers or distributors may in the future shift some or all of their purchases of products from us to our competitors or to other sources. The loss of one or more of our large customers or distributors, any reduction or delay in sales to these parties, our inability to develop relationships successfully with additional customers or distributors, or future price concessions that we may make could have a material adverse effect on our results of operations and financial condition.

Goodwill and other long-lived assets could become impaired.

We have a material amount of goodwill and other long-lived assets, including intangible assets, property plant and equipment and operating lease assets. We assess our goodwill at least annually for impairment. Our estimates of fair value are based on assumptions about future operating cash flows, growth rates, discount rates applied to these cash flows and current market estimates of value. We evaluate the recoverability of the carrying value of long-lived assets to be held and used whenever events or circumstances indicating a potential impairment exist, such as, but not limited to, adverse market conditions or business climate, a change in the extent or manner in which assets are being used, or a negative long-term performance outlook. An impairment would require us to reduce the carrying value of goodwill or other long-lived asset to fair value through a non-cash impairment charge in our results of operations, which could be material. See Note 5 – Goodwill and Intangible Assets of the Notes to the Consolidated Financial Statements for more information.

Portions of our total sales are dependent directly upon the level of capital expenditures by customers in key markets and industries, such as HVAC, refrigeration, power generation, oil and gas, unit material handling, water heating and aerospace. Some of these key markets and industries are inherently cyclical and can be impacted by governmental policy and the general macroeconomic climate. A significant or prolonged decline or disruption in one of those markets or industries may result in some of such customers delaying, canceling or modifying projects, or may result in nonpayment of amounts that are owed to us. These effects could have a material adverse effect on our results of operations and financial condition.

We rely on estimated forecasts to meet customers’ needs, and inaccuracies in such forecasts could materially adversely affect our business.

In some instances, we rely on estimated demand forecasts, based upon input from our customers, to determine how much material to purchase and product to manufacture. We may have limited visibility regarding our customers’ actual product needs. The quantities or timing required by our customers for our products could vary significantly. Also, from time to time, our customers may experience a deterioration of their businesses and may not be able to accurately estimate forecasted demand. Whether in response to changes affecting the industry or a customer’s specific business pressures, any cancellation, delay, inability to fulfill customer obligations, or other modification in our customers’ orders could significantly reduce our revenue, impact our working capital, cause our operating results to fluctuate from period to period and make it more difficult for us to predict our revenue. In the event of a cancellation or reduction of an order, we may not have enough time to reduce operating expenses to minimize the effect of the lost revenue on our business and we may purchase too much inventory and spend more capital than expected, which may have a material adverse effect on our results of operations, cash flows and financial condition.

We sell certain products for high volume applications, and any failure of those products to perform as anticipated could result in significant liability and expenses that may adversely affect our business and results of operations.

We manufacture and sell a number of products for high volume applications, including electric motors used in pools and spas, residential and commercial heating, ventilation and air conditioning and refrigeration equipment. Any failure of those products to perform as anticipated could result in significant product liability, product recall or rework, or other costs. The costs of product recalls and reworks are not generally covered by insurance.

If we were to experience a product recall or rework in connection with products of high volume applications, our financial condition or results of operations could be materially adversely affected.

One of our subsidiaries that we acquired in 2007 is subject to numerous claims filed in various jurisdictions relating to certain sub-fractional motors that were primarily manufactured through 2004 and that were included as components of residential and commercial ventilation units manufactured and sold in high volumes by a third party. These ventilation units are subject to regulation by government agencies such as the US Consumer Product Safety Commission (“CPSC”). The claims generally allege that the ventilation units were the cause of fires. Based on the current facts, we cannot assure you that these claims, individually or in the aggregate, will not have a material adverse effect on our subsidiary's results of operations, financial condition or cash flows. We cannot reasonably predict the outcome of these claims, the nature or extent of any CPSC or other remedial actions, if any, that our subsidiary or we on their behalf may need to undertake with respect to motors that remain in the field, or the costs that may be incurred, some of which could be significant. See Note 12 – Contingencies of the Notes to the Consolidated Financial Statements for more information.

Our ability to make required payments of principal and interest on our debt levels will depend on our future performance, which, to a certain extent, is subject to general economic, financial, competitive and other factors that are beyond our control. Our substantially increased indebtedness has the effect, among other things, of reducing our flexibility to changing business and economic conditions. We cannot assure you that our business will generate cash flow from operations or that future borrowings will be available under our current credit facilities in an amount sufficient to enable us to service our indebtedness or to fund our other liquidity needs on a timely basis or at all. Our indebtedness may have important consequences, for example, it could:

A portion of our indebtedness bears interest at variable rates that are linked to changing market interest rates. As a result, an increase in market interest rates would increase our interest expense and our debt service obligations on the variable rate indebtedness, and our net income and cash flows, including cash available for servicing our indebtedness, will correspondingly decrease. We utilize interest rate swaps that involve the exchange of floating for fixed rate interest payments to reduce interest rate volatility. However, we may not maintain interest rate swaps with respect to all of our variable rate indebtedness, and any swaps we enter into may not fully mitigate interest rate risk.

Further, the availability and terms of future financing may depend upon our ability to maintain or achieve certain credit ratings on our senior debt. The credit rating process is contingent upon our credit profile and other factors, many of which are beyond our control, including methodologies established and interpreted by third-party rating agencies. If we are unable to maintain or achieve certain credit ratings in the future, our interest expense could increase or our ability to obtain financing on favorable terms could be adversely affected.

Our credit facilities contain financial and restrictive covenants, which require us to maintain specified financial ratios and satisfy certain financial condition tests. These covenants could limit our ability to, among other things, borrow additional funds or take advantage of business opportunities, and may require that we take action to reduce our debt or to act in a manner contrary to our business strategies. An event of default under our debt agreements, if not cured or waived, could result in the acceleration of our indebtedness or otherwise have a material adverse effect on our business, financial condition, results of operations or debt service capability. See "Management's Discussion and Analysis of Financial Condition and Results of Operations - Liquidity and Capital Resources" for more information.

Many of our motors are incorporated into HVAC systems and other residential applications that OEMs sell to end users. The number of installations of new and replacement HVAC systems or components and other residential applications is higher during the spring and summer seasons due to the increased use of air conditioning during warmer months. Mild or cooler weather conditions during the spring and summer season often result in end users deferring the purchase of new or replacement HVAC systems or components. As a result, prolonged periods of mild or cooler weather conditions in the spring or summer season in broad geographical areas could have a negative impact on the demand for our HVAC motors and, therefore, could have an adverse effect on our operating performance. In addition, due to variations in weather conditions from year to year, our operating performance in any single year may not be indicative of our performance in any future year.

The effects of climate change create financial risks to our business. For example, the effects of climate change could disrupt our operations by impacting the availability and the cost of materials needed for manufacturing, exacerbate existing risks to our supply chain and increase insurance and other operating costs. These factors may impact our decisions to construct new facilities or maintain existing facilities in areas most prone to physical climate risks. We could also face indirect financial risks passed through the supply chain and disruptions that could result in increased prices for our products and the resources needed to produce them.

Increased public awareness and concern regarding global climate change has resulted in more regulations designed to reduce greenhouse gas emissions. These regulations are inconsistent, and are rapidly emerging and evolving. If our product portfolio does not align with these regulations, we may be required to make increased research and development and other capital expenditures to improve our product portfolio in order to meet new regulations and standards. Further, our customers and the

markets we serve may impose emissions or other environmental standards through regulation, market-based emissions policies or consumer preference that we may not be able to timely meet due to the level of capital investment or technological advancement. While we are committed to continuous improvements to our product portfolio to meet and exceed anticipated regulations and preferences, there can be no assurance that our commitments will be successful, that our products will be accepted by the market, that proposed regulation or deregulation will not have a negative competitive impact, or that economic returns will reflect our investments in new product development. In addition, the regulatory uncertainty and complexity driven by emerging and evolving regulations could increase our compliance costs, which may impact our results of operations.

As of the date of this filing, we have made several public commitments regarding our intended reduction of carbon emissions, including commitments to achieve Scope 1 and Scope 2 carbon emission neutrality by 2032, and Scope 3 carbon emission neutrality by 2050, and the establishment of science-based targets to reduce carbon emissions from our operations. Although we intend to meet these commitments, we may be required to expend significant resources to do so, which could increase our operational costs. If we either are unable to meet these commitments, or progress toward our commitments more slowly than expected, then we could incur adverse publicity and reaction from investors, activist groups and other stakeholders, which could adversely impact the perception of our brands and our products by current and potential customers, as well as investors, which would in turn adversely impact our results of operations.

Our success depends, in part, on the efforts and abilities of our senior management team and key associates and the contributions of talented associates in various operations and functions, such as engineering, finance, sales, marketing, manufacturing, etc. The skills, experience and industry contacts of our senior management team significantly benefit our operations and administration. The failure to attract or retain members of our senior management team and key talent could have a negative effect on our operating results.

Our failure to successfully integrate Altra, or to integrate our past acquisitions and any future acquisitions into our business within expected timetables could adversely affect our future results and the market price of our common stock.

The success of the Altra Transaction depends, in large part, on our ability to realize the anticipated benefits of the Altra Transaction and on our sales and profitability following the transaction. To realize these anticipated benefits, we must successfully integrate Altra into our businesses. This integration is complex and time-consuming, and is subject to a number of uncertainties, and no assurance can be given that the anticipated benefits will be realized or, if realized, the timing of their realization. The failure to successfully integrate and manage the challenges presented by the integration process may result in our failure to achieve some or all of the anticipated benefits of the Altra Transaction.

Potential difficulties that may be encountered in the integration process include, among others:

If any of these events were to occur, our ability to maintain relationships with customers, suppliers and employees or our ability to achieve the anticipated benefits of the Altra Transaction could be adversely affected, or could reduce our sales or earnings or otherwise adversely affect our business and financial results after the Altra Transaction and, as a result, adversely affect the market price of our common stock.

Apart from the Altra Transaction, as part of our growth strategy, we have made acquisitions, including our merger with the Rexnord PMC business, and our acquisition of the Arrowhead business, and expect to continue to make acquisitions. Our continued growth may depend on our ability to identify and acquire companies that complement or enhance our business on

acceptable terms, but we may not be able to identify or complete future acquisitions. We may not be able to integrate successfully our recent acquisitions, including Rexnord PMC and Arrowhead, or any future acquisitions, operate these acquired companies profitably, or realize the potential benefits from these acquisitions.

The Company continues to incur significant integration costs related to the Altra Transaction and our merger with the Rexnord PMC business, that could have an adverse effect on our liquidity, cash flows and operating results.

The Company has incurred, and expects to continue to incur, significant one-time costs in connection with the Altra Transaction, including the cost of financing, transaction costs, integration costs, and other costs that Company management believes are necessary to realize the anticipated synergies from the Altra Transaction. Incurring these costs may have an adverse effect on the Company’s liquidity, cash flows and operating results in the periods in which they are incurred.

In addition, the Company has incurred, and expects to continue to incur, significant one-time costs related to the integration of the Rexnord PMC business and the achievement of synergies with respect to such business. Although we believe that our projections of these costs and the costs related to the Altra Transaction are based on reasonable assumptions, if such costs are greater than anticipated, then they may have a material adverse effect on our liquidity, cash flows and operating results in the periods in which they are incurred.

Businesses that we have acquired or that we may acquire in the future, including the Altra business, the Rexnord PMC business and the Arrowhead business, may have liabilities which are not known to us.

We have assumed liabilities of acquired businesses, including the Altra business, the Rexnord PMC and the Arrowhead businesses and may assume liabilities of businesses that we acquire in the future. There may be liabilities or risks that we fail, or are unable, to discover, or that we underestimate, in the course of performing our due diligence investigations of acquired businesses. Additionally, businesses that we have acquired or may acquire in the future may have made previous acquisitions, and we will be subject to certain liabilities and risks relating to these prior acquisitions as well. We cannot assure you that our rights to indemnification, if any, contained in definitive acquisition agreements that we have entered or may enter into will be sufficient in amount, scope or duration to fully offset the possible liabilities associated with the business or property acquired. Any such liabilities, individually or in the aggregate, could have a material adverse effect on our business, financial condition or results of operations. As we begin to operate acquired businesses, we may learn additional information about them that adversely affects us, such as unknown or contingent liabilities, issues relating to compliance with applicable laws or issues related to ongoing customer relationships or order demand, or issues related to compliance with prior commercial agreements.

In connection with the Rexnord PMC acquisition, the Reorganization and the Distributions could result in significant tax liability, including as a result of an error in the determination of Overlap Shareholders or subsequent acquisitions of stock of Zurn or us. Under certain circumstances, Land (our wholly owned subsidiary) may be obligated to indemnify Zurn for any such taxes imposed on Zurn.

In connection with our merger with the Rexnord PMC business, Zurn received a tax opinion from its tax counsel (the “Rexnord Tax Opinion”) that includes an opinion to the effect that the Reorganization and the Distributions, will qualify as tax-free to Zurn, Land and the Zurn stockholders, as applicable, for US federal income tax purposes except, in the case of Zurn, to the extent Land’s payment to a subsidiary of Zurn under the terms of the Separation Agreement (the “Land Cash Payment”) exceeds RBS Global Inc.’s adjusted tax basis in Land common stock. The Rexnord Tax Opinion is based on, among other things, certain representations and assumptions as to factual matters and certain covenants made by us, Land and Zurn. Although we believe the representations, assumptions and covenants in the Rexnord Tax Opinion to be true, the failure of any such factual representation, assumption or covenant to be true, correct and complete in all material respects could adversely affect the validity of the opinion. The Rexnord Tax Opinion is not binding on the IRS or the courts, and it is possible that the IRS or the courts may not agree with the opinion. In addition, the Rexnord Tax Opinion is based on current law, and the conclusions in the opinion cannot be relied upon if current law changes with retroactive effect.

The Spin-Off will be taxable to Zurn pursuant to Section 355(e) of the US Internal Revenue Code of 1986, as amended if there is a 50% or greater change in ownership of either Zurn or Land, directly or indirectly, as part of a plan or series of related transactions that include the Spin-Off. For this purpose, any acquisitions of Land or Zurn stock or our stock within the period beginning two years before the Spin-Off and ending two years after the Spin-Off are presumed to be a part of such plan, although we and Zurn may be able to rebut that presumption. Zurn received a private letter ruling from the US Internal Revenue Service (the “IRS”) (the “IRS Ruling”) with respect to certain tax aspects of the Rexnord PMC transactions, including matters relating to the nature and extent of shareholders who may be counted for tax purposes as “Overlap Shareholders” (as such term is defined in the Rexnord PMC Merger Agreement) for purposes of determining the exchange ratio for the transaction in the Rexnord PMC Merger Agreement and the overall percentage change in the ownership of Land resulting from the merger of our subsidiary with and into Land. The continuing validity of the IRS Ruling is subject to the accuracy of factual representations

and assumptions made in the ruling request. Moreover, the IRS Ruling only describes the time, manner and methodology for measuring Overlap Shareholders and may be subject to varying interpretations.

The actual determination and calculation of Overlap Shareholders was made by us, Zurn and our respective advisors based on the IRS Ruling, but no assurance can be given that the IRS will agree with these determinations or calculations. If the IRS were to determine that the merger of our subsidiary with and into Land, as a result of an error in the determination of Overlap Shareholders, or other acquisitions of Land, Zurn, or our stock, either before or after the Spin-Off, resulted in a 50% or greater change in ownership and were part of a plan or series of related transactions that included the Spin-Off, such determination could result in significant tax liability to Zurn. In certain circumstances and subject to certain limitations, under the Tax Matters Agreement, Land is required to indemnify Zurn for 100% of the taxes that result if the Distributions become taxable as a result of certain actions by us or Land and for 90% of the taxes that result as a result of a miscalculation of the Overlap Shareholders. If this occurs and Land is required to indemnify Zurn, this indemnification obligation could be substantial and could have a material adverse effect on us and Land, including with respect to our financial condition and results of operations given that we have guaranteed the indemnification obligations of Land.

We face risks associated with our proposed sale of the industrial motors and generators businesses, which comprise a majority of our Industrial Systems operating segment.

We are subject to risks in connection with the proposed sale of the Industrial Motors and Generators businesses (the "Proposed Sale"), including the possibility that the conditions to the consummation of the Proposed Sale will not be satisfied on the terms or timeline expected, or at all. Further, potential risks include the diversion of management's attention from other business concerns, the potential loss of key employees and customers, potential impairment charges or losses if the business were to be divested at a loss, and restructuring and other disposal charges and the inability to eliminate certain Corporate overhead costs that are currently allocated to the Industrial Systems segment. In addition, the Company may face financial and commercial challenges associated with brand transitions and the disposition of certain proprietary assets that are expected to be transferred in the Proposed Sale. Any or all of these risks could impact the Company's financial results.

Risks Relating to Our Global Footprint

The global electric motors and controls, power generation and power transmission industries are highly competitive. We encounter a wide variety of domestic and international competitors due in part to the nature of the products we manufacture and the wide variety of applications and customers we serve. In order to compete effectively, we must retain relationships with major customers and establish relationships with new customers, including those in developing countries. Moreover, in certain applications, customers exercise significant power over business terms. It may be difficult in the short-term for us to obtain new sales to replace any decline in the sale of existing products that may be lost to competitors. Our failure to compete effectively may reduce our revenues, profitability and cash flow, and pricing pressures resulting from competition may adversely impact our profitability.

We have continued to see a trend with certain customers who are attempting to reduce the number of vendors from which they purchase product in order to reduce their costs and diversify their risk. As a result, we may lose market share to our competitors in some of the markets in which we compete.

In addition, some of our competitors are larger and have greater financial and other resources than we do. There can be no assurance that our products will be able to compete successfully with the products of these other companies.

There is substantial and continuing pressure on major OEMs and larger distributors to reduce costs, including the cost of products purchased from outside suppliers. As a result of cost pressures from customers, our ability to compete depends in part on their ability to generate production cost savings and, in turn, to find reliable, cost-effective outside suppliers to source components or manufacture their products. If we are unable to generate sufficient cost savings in the future to offset price reductions, then our gross margin could be materially adversely affected.

We manufacture a significant portion of our products outside the US, and political, societal or economic instability or public health crises may present additional risks to our business.

As of December 31, 2023, approximately 22,700 of our approximate 32,100 total associates and 123 of our principal manufacturing and warehouse facilities were located outside the US International operations generally are subject to various risks, including political, societal and economic instability, local labor market conditions, public health crises, breakdowns in trade relations, the imposition of tariffs and other trade restrictions, lack of reliable legal systems, ownership restrictions, the impact of government regulations, the effects of income and withholding taxes, governmental expropriation or nationalization, and differences in business practices. We may incur increased costs and experience delays or disruptions in product deliveries and payments in connection with international manufacturing and sales that could cause loss of revenue.

Unfavorable changes in the political, regulatory and business climates in countries where we have operations could have a material adverse effect on our financial condition, results of operations and cash flows, including, for example, the uncertainty surrounding trade relations between the US and China.

Moreover, ongoing geopolitical conflicts including those between Russia and Ukraine and those occurring in the Middle East and similar conflicts, have negatively impacted the global economy and in some instances, have led to various economic sanctions being imposed by the US, United Kingdom, European Union, and other countries. While the impacts of the conflict have not been material on our operating results to date, it is not possible to predict the broader or longer-term consequences of these conflicts or new conflicts that may arise in the future. Continued escalation of geopolitical tensions related to the conflict could also result in the loss of property, supply chain disruptions, significant inflationary pressure on raw material prices and cost and supply of other resources (such as energy and natural gas), fluctuations in our customers’ buying patterns, credit and capital market disruption which could impact our ability to obtain financing, increase in interest rates and adverse foreign exchange impacts. These broader consequences could have a material adverse effect on our financial condition, results of operations and cash flows. Such sanctions and other measures, as well as the existing and potential further responses to such sanctions, tensions and military actions, could adversely affect the global economy and financial markets and could adversely affect the operations of our subsidiaries in impacted regions as well as our business, financial condition and results of operations.

In addition, our international operations are governed by various US laws and regulations, including the Foreign Corrupt Practices Act and other similar laws, that prohibit us and our business partners from making improper payments or offers of payment to foreign governments and their officials and political parties for the purpose of obtaining or retaining business. Any alleged or actual violations of these regulations may subject us to government scrutiny, severe criminal or civil sanctions and other liabilities.

We have a significant number of employees in Europe and other jurisdictions where trade union membership is common. Although we believe that our relations with our employees are strong, if our unionized workers were to engage in a strike, work stoppage or other slowdown in the future, we could experience a significant disruption of our operations, which could interfere with our ability to deliver products on a timely basis and could have other negative effects, such as decreased productivity and increased labor costs. In addition, if a greater percentage of our workforce becomes unionized as a result of legal or regulatory changes which may make union organizing easier, or otherwise, our costs could increase and our efficiency may be affected in a material adverse manner, negatively impacting our business and financial results. Further, many of our direct and indirect customers and their suppliers, and organizations responsible for shipping our products, have unionized workforces and their businesses may be impacted by strikes, work stoppages or slowdowns, any of which, in turn, could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We use derivative financial instruments in order to reduce the substantial effects of currency and commodity fluctuations and interest rate exposure on our cash flow and financial condition. These instruments may include foreign currency and commodity forward contracts, currency swap agreements and currency option contracts, as well as interest rate swap agreements. We have entered into, and may continue to enter into, such hedging arrangements. By utilizing hedging instruments, we may forgo benefits that might result from fluctuations in currency exchange, commodity and interest rates. We are also exposed to the risk

that counterparties to hedging contracts will default on their obligations. Any default by such counterparties might have an adverse effect on us.

The net assets, net earnings and cash flows from our foreign subsidiaries are based on the US Dollar equivalent of such amounts measured in the applicable functional currency.

These foreign operations have the potential to impact our financial position due to fluctuations in the local currency arising from the process of re-measuring the local functional currency in US Dollars. Any increase in the value of the US Dollar in relation to the value of the local currency, whether by means of market conditions or governmental actions such as currency devaluations, will adversely affect our revenues from our foreign operations when translated into US Dollars. Similarly, any decrease in the value of the US Dollar in relation to the value of the local currency will increase our operating costs in foreign operations, to the extent such costs are payable in foreign currency, when translated into US Dollars.

General economic conditions and conditions in the global financial markets can affect our results of operations. Deterioration in the global economy could lead to higher unemployment, lower consumer spending and reduced investment by businesses, and could lead our customers to slow spending on our products or make it difficult for our customers, our vendors and us to accurately forecast and plan future business activities. Worsening economic conditions could also affect the financial viability of our suppliers, some of which could be considered key suppliers. If the commercial, industrial, residential HVAC, power generation and power transmission markets significantly deteriorate, our business, financial condition and results of operations will likely be materially and adversely affected. Some of the industries that we serve are highly cyclical, such as the aerospace, energy, metals, mining and industrial equipment industries. Additionally, our stock price could decrease if investors have concerns that our business, financial condition and results of operations will be negatively impacted by a worldwide economic downturn.

A significant amount of our revenue is generated from customers located outside of the US, and a substantial portion of our assets and associates are located outside of the US which requires us to interpret the income tax laws and rulings in each of those taxing jurisdictions. Due to the subjectivity of tax laws between those jurisdictions as well as the subjectivity of factual interpretations, our estimates of income tax liabilities may differ from actual payments or assessments. Claims from taxing authorities related to these differences could have an adverse impact on our operating results and financial position.

The funded status of our defined benefit pension plans depends on such factors as asset returns, market interest rates, legislative changes and funding regulations. If the returns on the assets of any of our plans were to decline in future periods, if market interest rates were to decline, if the Pension Benefit Guaranty Corporation were to require additional contributions to any such plans as a result of acquisitions or if other actuarial assumptions were to be modified, our future required cash contributions and pension costs to such plans could increase. Any such increases could impact our business, financial condition, results of operations or cash flows. The need to make contributions to such plans may reduce the cash available to meet our other obligations, including our obligations under our borrowing arrangements or to meet the needs of our business.

We are subject to US federal, state, and international income, payroll, property, sales and use, fuel, and other types of taxes. Changes in tax rates, enactment of new tax laws, revisions of tax regulations, and claims or litigation with taxing authorities, including claims or litigation related to our interpretation and application of tax laws and regulations, could result in substantially higher taxes, could have a negative impact on our ability to compete in the global marketplace, and could have a significant adverse effect on our results or operations, financial conditions and liquidity. The impact of these factors referenced

above may be substantially different from period to period. Final laws enacting the Organisation for Economic Co-operation and Development's global minimum tax framework ("Pillar Two Laws') are effective beginning in 2024 in the European Union and other countries where we do business. The Company faces uncertainty related to the potential implementation of Pillar Two Laws in other countries where we operate. We are continuing to monitor the legislative process and evaluate the potential impact of implementation of Pillar Two Laws by other countries.

It is difficult to predict the timing and effect that future tax law changes could have on our earnings both in the US and in foreign jurisdictions. Such changes could cause us to experience an effective tax rate significantly different from previous periods or our current estimates. If our effective tax rate were to increase, our financial condition and results of operations could be adversely affected.

Changes to US trade policy, tariff and import/export regulations and foreign government regulations could adversely affect our business, operating results, foreign operations, sourcing and financial condition.

Changes to tariffs and other changes in US and international trade policy have the potential to adversely impact the global economy or certain sectors thereof, including our industry, and as a result, could have a material adverse effect on our business, operating results and financial condition. Further, we cannot predict what changes to trade policy will be made in the future, which may have a material adverse effect on our business, financial condition, and results of operations and could also provide our competitors with an advantage over us or increase our costs.

We believe that the issue of foreign governmental regulations that would impact our arrangements with our foreign manufacturing sources is of particular concern with regard to countries such as China due to the less mature nature of the Chinese market economy and the historical involvement of the Chinese government in industry.

Our business is also subject to risks associated with US and foreign legislation and regulations relating to imports, including quotas, duties, tariffs or taxes, and other charges or restrictions on imports, which could adversely affect our operations and our ability to import products at current or increased levels, and substantially all of our import operations are subject to customs duties on imported products imposed by the governments where our production facilities are located, including raw materials. We cannot predict whether additional US and foreign customs quotas, duties, tariffs, taxes or other charges or restrictions, requirements as to raw materials, reporting obligations pertaining to “conflict minerals” and polyfluoroalkyl substances (commonly referred to as "PFAS"), or other restrictions will be imposed in the future or adversely modified, or what effect such actions would have on our costs of operations. Future trade agreements, quotas, duties, or tariffs may have a material adverse effect on our business, financial condition, and results of operations.

We are, from time to time, a party to litigation that arises in the normal course of our business operations, including product warranty and liability claims, contract disputes and environmental, asbestos, employment and other litigation matters. We face an inherent business risk of exposure to product liability, asbestos and warranty claims in the event that the use of our products is alleged to have resulted in injury or other damage. As described above, one of our subsidiaries that we acquired in 2007 is subject to numerous claims filed in various jurisdictions relating to certain sub-fractional motors that were primarily manufactured through 2004 and that were included as components of residential and commercial ventilation units manufactured and sold in high volumes by a third party. In addition, certain subsidiaries of ours are co-defendants in various lawsuits in a number of US jurisdictions alleging personal injury as a result of exposure to asbestos that was used in certain components of legacy Rexnord PMC business products. The uncertainties of litigation and the uncertainties related to insurance and indemnification coverage make it difficult to accurately predict the ultimate financial effect of these claims. If our insurance or indemnification coverage is not adequate to cover our potential financial exposure, our insurers or indemnitors dispute their obligations to provide coverage, or the actual number or value of claims differs materially from our existing estimates, we could incur material costs that could have a material adverse effect on our business, financial condition, results of operations or cash flows.

While we maintain general liability and product liability insurance coverage in amounts that we believe are reasonable, we cannot assure you that we will be able to maintain this insurance on acceptable terms or that this insurance will provide sufficient coverage against potential liabilities that may arise. Any product liability claim may also include the imposition of punitive damages, the award of which, pursuant to certain state laws, may not be covered by insurance. Any claims brought against us, with or without merit, may have an adverse effect on our business and results of operations as a result of potential adverse outcomes, the expenses associated with defending such claims, the diversion of our management’s resources and time and the potential adverse effect to our business reputation. See Note 12 – Contingencies of the Notes to the Consolidated Financial Statements for more information.

We own or otherwise have rights in a number of patents and trademarks relating to the products we manufacture, which have been obtained over a period of years, and we expect to actively pursue patents in connection with new product development and to acquire additional patents and trademarks through the acquisitions of other businesses. These patents and trademarks have been of value in the growth of our business and may continue to be of value in the future.

Our inability to protect this intellectual property generally, or the illegal breach of some or a large group of our intellectual property rights, would have an adverse effect on our business. In addition, there can be no assurance that our intellectual property will not be challenged, invalidated, circumvented or designed-around, particularly in countries where intellectual property rights are not highly developed or protected. We have incurred in the past, and expect to incur in the future, significant costs associated with defending challenges to our intellectual property or enforcing our intellectual property rights, which could adversely impact our cash flow and results of operations.

We may be subject to claims from third parties that our products or technologies infringe on their intellectual property rights or that we have misappropriated intellectual property rights. If we are involved in a dispute or litigation relating to infringement of third-party intellectual property rights, we could incur significant costs in defending against those claims. Our intellectual property portfolio may not be useful in asserting a counterclaim, or negotiating a license, in response to a claim of infringement or misappropriation. In addition, as a result of such claims of infringement or misappropriation, we could lose our rights to technology that is important to our business, or be required to pay damages or license fees with respect to the infringed rights or be required to redesign our products at substantial cost, any of which could adversely impact our cash flows and results of operations.

We are subject to a variety of domestic and foreign laws, rules and regulations relating to improper payments to government officials, bribery, anti-kickback and false claims rules, competition, export and import compliance, money laundering and data privacy. If our associates, agents or business partners engage in activities in violation of these laws, rules or regulations, we may be subject to civil or criminal fines or penalties or other sanctions, may incur costs associated with government investigations, or may suffer damage to our reputation.

We depend heavily on our information technology infrastructure in order to achieve our business objectives. If we experience a problem that impairs this infrastructure, such as a computer virus, a problem with the functioning of an important IT application, or an intentional disruption of our IT systems by a third party, the resulting disruptions could impede our ability to record or process orders, manufacture and ship in a timely manner, or otherwise carry on our business in the ordinary course. Any such events could cause us to lose customers or revenue and could require us to incur significant expense to eliminate these problems and address related security concerns, including costs relating to investigation and remediation actions.

IT security threats via computer malware, social engineering and other “cyber-attacks,” which are increasing in both frequency and sophistication, could also result in unauthorized disclosures of information, such as customer data, personally identifiable information or other confidential or proprietary material, and create financial liability, subject us to legal or regulatory sanctions, or damage our reputation. Moreover, because the techniques used to gain access to or sabotage systems often are not recognized until launched against a target, we may be unable to anticipate the methods necessary to defend against these types of attacks, and we cannot predict the extent, frequency or impact these attacks may have. While we maintain robust information security mechanisms and controls, the impact of a material IT event could have a material adverse effect on our competitive position, results of operations, financial condition and cash flow.

We regularly implement new IT systems and make enhancements to our existing Enterprise Resource Planning systems and other business and financial systems (collectively referred to as "IT Systems"), with the aim of enabling management to achieve better control across our business operations. As part of our supply chain optimization and footprint repositioning strategies, we will continue to implement IT Systems throughout the business. The process of implementation can be costly and can divert the

attention of management from the day-to-day operations of the business. As we implement the IT Systems, some elements may not perform as expected. If these critical enhancements are delayed, in whole or in part, our current IT Systems may not be sufficient to support our planned operations and certain IT Systems may become obsolete. There can be no assurance that the enhancements to our IT Systems will be successfully implemented and failure to do so could have a material adverse effect on our operations. The occurrence of any of these events could have an adverse effect on our business.

Changes in data privacy laws and our ability to comply with them could have a material adverse effect on us.

Changes in labor or employment laws could increase our costs and may adversely affect our business.

Various federal, state and international labor and employment laws govern our relationship with employees and affect operating costs. These laws include minimum wage requirements, overtime, unemployment tax rates, workers’ compensation rates paid, leaves of absence, mandated health and other benefits, and citizenship requirements. Significant additional government-imposed increases or new requirements in these areas could materially affect our business, financial condition, operating results or cash flow. In the event our employee-related costs rise significantly, we may have to reduce the number of our employees or shut down certain manufacturing facilities. Any such actions would not only be costly but could also materially adversely affect our business.

We are subject to environmental laws that could impose significant costs on us and the failure to comply with such laws could subject us to sanctions and material fines and expenses.

We are subject to a variety of federal, state, local, foreign and provincial environmental laws and regulations, including those governing the discharge of pollutants into the air or water, the management and disposal of hazardous substances and wastes, requiring permits for such activity and the responsibility to investigate and clean up contaminated sites that are or were owned, leased, operated or used by us or our predecessors. Fines and penalties and revocation of permits may be imposed for non-compliance with applicable environmental laws and regulations and the failure to have or to comply with the terms and conditions of required permits. The operation of manufacturing plants entails risks related to compliance with environmental laws, requirements and permits, and a failure by us to comply with applicable environmental laws, regulations, or permits could result in civil or criminal fines, penalties, enforcement actions, third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures, including the installation of pollution control equipment or remedial actions. Moreover, if applicable environmental laws and regulations, or the interpretation or enforcement thereof, become more stringent in the future, we could incur capital or operating costs beyond those currently anticipated.

In addition, there are known environmental liabilities, and there may be environmental conditions currently unknown to us relating to our prior, existing or future sites or operations or those of predecessor companies whose liabilities we may have assumed or acquired which could have a material adverse effect on our business.

We are being indemnified, or expect to be indemnified by third parties, subject to certain caps or limitations on the indemnification, for certain environmental costs and liabilities associated with certain owned or operated sites. We cannot assure you that third parties who indemnify or who are expected to indemnify us for certain environmental costs and liabilities associated with certain owned or operated sites will in fact satisfy their indemnification obligations. If those third parties become unable to, or otherwise do not, comply with their respective indemnity obligations, or if certain contamination or other

liability for which we are obligated is not subject to these indemnities, we could become subject to significant liabilities. See Note 12 – Contingencies of the Notes to the Consolidated Financial Statements for more information.

Natural disasters, acts or threats of war or terrorism, international conflicts, and the actions taken by the US and other governments in response to such events could cause damage or disrupt our business operations, our suppliers, or our customers, and could create political or economic instability, any of which could have an adverse effect on our business. Although it is not possible to predict such events or their consequences, these events could decrease demand for our products, could make it difficult or impossible for us to deliver products, could disrupt our supply chain or could result in disruption of our manufacturing processes. We may also be negatively impacted by actions by the US or foreign governments which could disrupt manufacturing and commercial operations, including policy changes affecting taxation, trade, immigration, currency devaluation, tariffs, customs, border actions and the like, including, for example, trade relations between the US and China, and ongoing geopolitical tensions and conflicts.

Similarly, unplanned repairs or equipment outages, including those due to natural disasters, could result in the disruption of our manufacturing processes. Any interruption in our manufacturing processes would interrupt our production of products, reduce our income and cash flow and could result in a material adverse effect on our business and financial condition.

Our stock has been and may continue to be subject to significant fluctuations and volatility.

The market price of shares of our common stock has been and may continue to be volatile. Among the factors that could affect our common stock price are those discussed above under “Risk Factors” as well as:

In addition, stock markets have experienced and may continue to experience extreme volatility that may be unrelated to the operating performance of particular companies. These broad market fluctuations have adversely affected and may continue to adversely affect the trading price of our common stock.

ITEM 1B - UNRESOLVED STAFF COMMENTS

None.

ITEM 1C - CYBERSECURITY

Our executive leadership team is responsible for the global risk management framework and influences the culture of risk management within the Company. Additionally, our Board is responsible for oversight of the executive leadership team’s approach to risk management and cybersecurity strategy. The Board recognizes the importance of maintaining security and the trust of our customers, clients, business partners and associates. The Company has developed a cybersecurity program founded on a strong management approach, policy driven governance, standards and procedures, and execution of a comprehensive strategy that adapts to changing risks. The Company’s cybersecurity policies and standards are fully integrated into our overall risk management process and were created based upon the National Institute of Standards and Technology cybersecurity framework and other applicable industry standards. The Company endeavors to manage cybersecurity risks through a comprehensive and multidisciplinary approach that emphasizes confidentiality, security, and availability of our information by deploying processes to support identification of cybersecurity threats and using tools for prevention and mitigation of cybersecurity incidents. To the extent that cybersecurity incidents may occur, the Company has established cross functional procedures that enable a prompt and effective response to cybersecurity incidents.

Risk Management and Strategy

Our global risk management policy provides a uniform approach for monitoring, identifying, measuring and responding to enterprise-wide risk to minimize potential disruptions to business operations and harm to reputation. Our global risk management policies framework encompasses, enterprise risk management, business continuity and cybersecurity. Cybersecurity risk is a key component of our overall global risk management policy. The Company’s cybersecurity program is focused on the following areas:

The Company completes periodic assessments and testing of its practices addressing cybersecurity threats and incidents. These efforts include, but are not limited to, audits, assessments, tabletop exercises, and vulnerability testing and are focused on

evaluation of cybersecurity policy efficacy. These assessments and testing efforts are supported by third-party consultants who specialize in cyber-risk mitigation. The results of these third-party engagements are used to inform enhancements and adjustments to our cybersecurity policies and practices.

Governance

Our full Board is responsible for the oversight of the Company's operational and strategic risk management processes. Our Board believes that oversight of risk management belongs at the full Board level rather than with any single committee, primarily because of the importance of understanding and mitigating risk to the overall success of our Company. As part of its risk management responsibilities, our full Board provides oversight of the Company’s management and mitigation of cybersecurity risks.

To gather information about risks to the organization, including cybersecurity, the Risk Committee identifies primary areas that generate enterprise risk and then distributes a survey to a group of our top leaders. The Risk Committee periodically summarizes its activities and findings (including the results of its survey and heat map analysis) related to cybersecurity and other risks directly to our CEO, as well as the Audit Committee and our full Board. The Risk Committee’s work is also used by our management team as part of our disclosure controls and procedures to ensure that information regarding material risks applicable to the Company are appropriately disclosed in our public filings.

While our Board maintains responsibility for oversight of all areas of risk management, it relies on our Audit Committee to address significant financial risk exposure we may face and the steps management has taken to monitor, control and report such exposures. These risks are further reported to the full Board, as appropriate.

The Risk Committee receives prompt information regarding any cybersecurity incident in accordance with our cyber incident response policy and crisis communication procedures. The Risk Committee, in concert with the executive leadership team, evaluate this information and escalates notice to the Board, as appropriate.

The CISO works collaboratively with the Risk Committee. The CISO has implemented and monitors a program designed to protect the Company’s information systems and to promptly respond to any cybersecurity incidents in accordance with the documented incident response plans. To facilitate the success of the Company’s cybersecurity risk management program, multidisciplinary teams are engaged to identify, classify, and address cybersecurity threats and incidents. Through prompt notifications and ongoing communications, the CISO and other key management personnel work to monitor, prevent, detect, mitigate and remediate cybersecurity threats and incidents.

The Company’s cybersecurity programs are supported by experienced and knowledgeable leaders. The CISO has served in various roles related to information technology and information security for over 20 years. The CISO maintains relevant certifications, including Certified Information Systems Security Manager (“CISM”) and Certified Information Systems Auditor (“CISA”). Additionally, several cybersecurity team members reporting directly to the CISO maintain certifications, including CISM, CISA and Certified Information System Security Professionals (“CISSP”). The Company’s Chief Digital & Information Officer has over 30 years of experience with information technology and digital strategy. The Company’s CEO, CFO and General Counsel each have over 20 years of experience managing risk at the Company or at similar companies, including risks arising from cybersecurity threats.

Cybersecurity threats, including those resulting from previous cybersecurity incidents, have not materially affected and are not reasonably likely to materially affect the Company, including its business strategy, results of operations or financial condition.

ITEM 2 - PROPERTIES

Our corporate offices are located in Milwaukee, Wisconsin in an approximately 142,000 square foot rented office building and in Rosemont, Illinois in an approximately 20,000 square foot rented office building. We have manufacturing, sales and service facilities throughout the US and in Mexico, China, Europe and India as well as a number of other locations throughout the world.

Our Industrial Powertrain Solutions segment currently includes 159 facilities, of which 58 are principal manufacturing facilities and 29 are principal warehouse facilities. The Industrial Powertrain Solutions segment's present operating facilities contain a total of approximately 11.5 million square feet of space, of which approximately 30% are leased.

The following represents our principal manufacturing and warehouse facilities in the Industrial Powertrain Solutions segment (square footage in millions):

Our Power Efficiency Solutions segment currently includes 67 facilities, of which 21 are principal manufacturing facilities and 10 are principal warehouse facilities. The Power Efficiency Solutions segment's present operating facilities contain a total of approximately 5.2 million square feet of space, of which approximately 34% are leased.

The following represents our principal manufacturing and warehouse facilities in the Power Efficiency Solutions segment (square footage in millions):

Our Automation & Motion Control segment currently includes 68 facilities, of which 25 are principal manufacturing facilities and 16 are principal warehouse facilities. The Automation & Motion Control segment's present operating facilities contain a total of approximately 2.6 million square feet of space, of which approximately 72% are leased.

The following represents our principal manufacturing and warehouse facilities in the Automation & Motion Control segment (square footage in millions):

Our Industrial Systems segment currently includes 29 facilities, of which 12 are principal manufacturing facilities and 7 are principal warehouse facilities. The Industrial Systems segment's present operating facilities contain a total of approximately 3.2 million square feet of space, of which approximately 39% are leased.

The following represents our principal manufacturing and warehouse facilities in the Industrial Systems segment (square footage in millions):

ITEM 3 - LEGAL PROCEEDINGS

From time to time, we are subject to a variety of litigation and other legal and regulatory claims incidental to our business. We cannot predict the outcome of these lawsuits, legal proceedings and claims with certainty. See Note 12 - Contingencies, of the Notes to the Consolidated Financial Statements for more information.

ITEM 4 - MINE SAFETY DISCLOSURES

Not applicable.

ITEM 5 - MARKET FOR THE REGISTRANT'S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

General

Our common stock, $0.01 par value per share, is traded on the New York Stock Exchange under the symbol “RRX.” The number of registered holders of common stock as of February 22, 2024 was 256.

There were no repurchases of our common stock during the quarter ended December 31, 2023.

Under our equity incentive plans, participants may pay the exercise price or satisfy all or a portion of the federal, state and local withholding tax obligations arising in connection with plan awards by electing to (a) have the Company withhold shares of common stock otherwise issuable under the award, (b) tender back shares received in connection with such award or (c) deliver other previously owned shares of common stock, in each case having a value equal to the exercise price or the amount to be withheld. During the quarter ended December 31, 2023, we did not acquire any shares in connection with transactions pursuant to equity incentive plans.

Item 12 of this Annual Report on Form 10-K contains certain information relating to our equity compensation plans.

Stock Performance

The following information in this Item 5 of this Annual Report on Form 10-K is not deemed to be “soliciting material” or to be “filed” with the SEC or subject to Regulation 14A or 14C under the Securities Exchange Act of 1934 (the “Exchange Act”) or to the liabilities of Section 18 of the Exchange Act, and will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933 or the Exchange Act.

The following graph compares the hypothetical total shareholder return (including reinvestment of dividends) on an investment in (1) our common stock, (2) the Standard & Poor's MidCap 400 Index, and (3) the Standard & Poor's 400 Industrials Index, for the period December 29, 2018 through December 31, 2023. In each case, the graph assumes the investment of $100.00 on December 29, 2018.

First Quarter 2024 Dividend

On January 29, 2024, the Board of Directors declared a quarterly dividend of $0.35 per share. The dividend is payable on April 12, 2024, to shareholders of record at the close of business on March 28, 2024.

ITEM 6 - [RESERVED]

ITEM 7 - MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Effective for fiscal year 2022, we approved a change in the fiscal year end from a 52/53 week fiscal year ending on the Saturday closest to December 31 to a fiscal year ending on December 31. We refer to the fiscal year ended December 31, 2023 as “fiscal 2023", the fiscal year ended December 31, 2022 as “fiscal 2022" and the fiscal year ended January 1, 2022 as “fiscal 2021".

Regal Rexnord Corporation (NYSE: RRX) (“we,” “us,” “our” or the “Company”) is a global leader in the engineering and manufacturing of factory automation sub-systems, industrial powertrain solutions, automation and mechanical power transmission components, electric motors and electronic controls, air moving products and specialty electrical components and systems, serving customers around the world. Through longstanding technology leadership and an intentional focus on producing more energy-efficient products and systems, we help create a better tomorrow – for our customers and for the planet.

We are headquartered in Milwaukee, Wisconsin and have manufacturing, sales and service facilities worldwide. As of the end of fiscal 2023, the Company, including its subsidiaries, employed approximately 32,100 people in its global manufacturing, sales, and service facilities and corporate offices. In fiscal 2023, we reported annual net sales of $6.3 billion compared to $5.2 billion in fiscal 2022.

Our company is comprised of four operating segments: Industrial Powertrain Solutions ("IPS"), Power Efficiency Solutions ("PES"), Automation & Motion Control ("AMC") and Industrial Systems. Effective during the first quarter of 2023, in conjunction with the Altra Transaction (as defined in Note 4 - Held for Sale, Acquisitions and Divestitures), we realigned our four operating segments with the change to our management structure and operating model. See Note 6 - Segment Information of the Notes to the Consolidated Financial Statements for further information.

A description of our four operating segments is as follows:

On September 23, 2023, we signed an agreement to sell our industrial motors and generators businesses, which represent the majority of the Industrial Systems operating segment, for total consideration of $400 million plus cash transferred at close, subject to working capital and other customary purchase price adjustments. This transaction is expected to close in the first half of 2024. The assets and liabilities related to these businesses have been reclassified to Assets Held for Sale, Noncurrent Assets

Held for Sale, Liabilities Held for Sale and Noncurrent Liabilities Held for Sale on the Company's Consolidated Balance Sheet as of December 31, 2023. The sale of the industrial motors and generators businesses does not represent a strategic shift that will have a major effect on our operations and financial results and, therefore, did not qualify for presentation as discontinued operations. See Note 4 - Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for further information.

Our level of net sales for any given period is dependent upon a number of factors, including (i) the demand for our products; (ii) the strength of the economy generally and the end markets in which we compete; (iii) our customers’ perceptions of our product quality at any given time; (iv) our ability to meet customer demands in a timely manner; and (v) the selling price of our products. As a result, our total revenue has tended to experience quarterly variations and our total revenue for any particular quarter may not be indicative of future results.

We use the term “organic sales" to refer to sales from existing operations excluding (i) sales from acquired businesses recorded prior to the first anniversary of the acquisition (“Acquisition Sales”), (ii) less the amount of sales attributable to any businesses divested/to be exited, and (iii) the impact of foreign currency translation. The impact of foreign currency translation is determined by translating the respective period’s organic sales using the same currency exchange rates that were in effect during the prior year periods. We use the term “organic sales growth” to refer to the increase in our sales between periods that is attributable to organic sales. We use the term “acquisition growth” to refer to the increase in our sales between periods that is attributable to Acquisition Sales. Organic sales, organic sales growth and acquisition growth are non-GAAP financial measures. See reconciliation of these measures to GAAP net sales in the section entitled "Non-GAAP Measures" below.

Outside of general economic cyclicality, our business units experience different levels of variation in sales from quarter to quarter based on factors specific to each business. For example, a portion of our Power Efficiency Solutions segment manufactures products that are used in air conditioning applications. As a result, our sales for that business tend to be lower in the first and fourth quarters and higher in the second and third quarters. In contrast, our Industrial Powertrain Solutions segment, Automation & Motion Control segment and Industrial Systems segment have a broad customer base and a variety of applications, thereby helping to mitigate large quarter-to-quarter fluctuations outside of general economic conditions.

Our general and administrative expenses consist primarily of costs for (i) salaries, benefits and other personnel expenses related to our executive, finance, human resource, information technology, legal and operations functions; (ii) occupancy expenses; (iii) technology related costs; (iv) depreciation and amortization; and (v) corporate-related travel. The majority of our general and administrative costs are for salaries and related personnel expenses. These costs can vary by business given the location of our different manufacturing operations.

Our sales and marketing expenses consist primarily of costs for (i) salaries, benefits and other personnel expenses related to our sales and marketing function; (ii) internal and external sales commissions and bonuses; (iii) travel, lodging and other out-of-pocket expenses associated with our selling efforts; and (iv) other related overhead.

Our general engineering and research and development expenses consist primarily of costs for (i) salaries, benefits and other personnel expenses; (ii) the design and development of new products and enhancements to existing products; (iii) quality assurance and testing; and (iv) other related overhead. Our research and development efforts tend to be targeted toward developing new products that would allow us to maintain or gain additional market share, whether in new or existing applications. In particular, a large driver of our research and development efforts is to raise the energy efficiency, and lower the environmental impact of our products and sub-systems.

The following table presents impairments by segment as of December 31, 2023, December 31, 2022 and January 1, 2022:

Altra, Rexnord and Arrowhead Transactions

In connection with the Altra Transaction, we entered into certain financing arrangements, which are described below under “Liquidity and Capital Resources”.

aggregate) in connection with the Rexnord Transaction. The Rexnord PMC business forms a part of our Industrial Powertrain Solutions and Automation & Motion Control segments, and its financials have been included in results for those segments from the date of acquisition. See Item I - Business and Note 4 – Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for additional information regarding the Rexnord Transaction.

In connection with the Rexnord Transaction, we entered into certain financing arrangements, which are described below under “Liquidity and Capital Resources”.

At a meeting of the Board of Directors of Regal Rexnord Corporation on October 26, 2021, the Board approved a change in the fiscal year end from a 52-53 week year ending on the Saturday closest to December 31 to a calendar year ending on December 31, effective beginning with fiscal year 2022. We made the fiscal year change on a prospective basis and did not adjust operating results for prior periods. We believe this change provides several benefits, including aligning our reporting periods to be more consistent with peer companies. While this change impacts the comparability of each of the periods presented, the impact is not material.

In fiscal 2024, we expect diluted earnings per share to be $4.58 to $5.38. Our fiscal 2024 diluted earnings per share guidance is based on an effective tax rate of 24%. Our outlook for fiscal 2024 excludes financial impacts from the agreement to sell our industrial motors and generators businesses, which is expected to close during the first half of 2024.

Results of Operations

 

Net sales for the Industrial Powertrain Solutions segment for fiscal 2023 were $2,403.5 million, a 44.2% increase compared to fiscal 2022 net sales of $1,666.3 million. The increase consisted of acquisition growth of 46.1%, offset by an organic sales decline of 1.9%. The increase in acquisition growth was primarily driven by $768.3 million from the acquisition of Altra. Gross profit increased $190.3 million or 29.1% primarily driven by $209.0 from the acquisition of Altra, partially offset by a $10.0 million increase in restructuring costs. Operating expenses for fiscal 2023 increased $280.7 million as compared to fiscal 2022. The increase was primarily driven by $249.0 from the acquisition of Altra including an increase in amortization expense, transaction and integration costs and employee compensation costs. For fiscal 2023, the Industrial Powertrain Solutions segment incurred transaction and integration costs of $56.9 million related to the Altra Transaction compared to $13.3 million of transaction costs related to the Altra Transaction in fiscal 2022.

Net sales for the Power Efficiency Solutions segment for fiscal 2023 were $1,808.9 million, an 18.8% decrease compared to fiscal 2022 net sales of $2,227.2 million. The decrease consisted of an organic sales decline of 18.4% and a negative foreign currency translation impact of 0.4%. The decrease was primarily driven by lower volumes resulting from slowing market demand and channel inventory destocking in the North America pool pump, residential and light commercial HVAC and general industrial markets. Gross profit decreased $86.2 million or 14.1% primarily driven by a $103.0 million decrease attributable to lower volumes, partially offset by improved manufacturing performance. Operating expenses for fiscal 2023 increased $23.3 million as compared to fiscal 2022. The increase in operating expenses was primarily driven by favorable foreign exchange rates in 2022.

Net sales for the Automation & Motion Control segment for fiscal 2023 were $1,516.8 million, a 96.4% increase compared to fiscal 2022 net sales of $772.3 million. The increase consisted of acquisition growth of 90.8% and organic sales growth of 5.9%. The acquisition growth was primarily driven by $701.4 million from the acquisition of Altra. The organic sales growth was primarily driven by share gains in the aerospace and data center markets of $90.1 million, partially offset by market declines in the food and beverage and alternative energy markets of $47.0 million. Gross profit increased $307.6 million or 111.9% primarily driven by $264.8 million from the acquisition of Altra and an $11.4 million decrease in restructuring costs. Operating expenses for fiscal 2023 increased $246.8 million as compared to fiscal 2022. The increase in operating expenses was primarily due to $245.5 million from the acquisition of Altra including an increase in amortization expense, transaction and integration costs and employee compensation costs. For fiscal 2023, the Automation & Motion Control segment incurred transaction and integration costs of $30.0 million related to the Altra Transaction compared to $5.7 million of transaction costs related to the Altra Transaction in fiscal 2022.

Net sales for the Industrial Systems segment for fiscal 2023 were $521.5 million, a 5.5% decrease compared to fiscal 2022 net sales of $552.1 million. The decrease consisted of an organic sales decline of 4.3% and a negative foreign currency translation impact of 1.2%. The decrease was primarily driven by softening demand in the North American motors market and weakness in the Chinese and Pacific motors and generators markets, partially offset by strength in demand in the North American generators market and European motors market. Gross profit for fiscal 2023 decreased $14.1 million or 10.8% primarily due to volume reductions and material inflation, partially offset by price realization. Operating expenses for fiscal 2023 increased $160.1 million due to $87.7 million loss on assets held for sale and $57.3 million goodwill impairment following the announced sale of the industrial motors and generators businesses.

The effective tax rate for fiscal 2023 was (3,293.8)% compared to 19.4% for fiscal 2022. The change in the effective tax rate was primarily due to the impact of the nondeductible goodwill impairment and loss on assets held for sale related to the proposed sale of the industrial motors and generators businesses.

Net sales for fiscal 2022 were $5.2 billion, a 36.9% increase as compared to fiscal 2021 net sales of $3.8 billion. The increase consisted of positive organic sales growth of 9.3% and a positive impact from acquisitions of 29.9%, partially offset by a negative foreign currency translation impact of 2.2%. The increase was primarily driven by sales increases in North American markets and $1,139.6 million from the acquisitions of the Rexnord PMC and Arrowhead businesses. Gross profit increased $558.1 million or 50.2% as compared to the prior year. The increase from the prior year was primarily driven by $413.1 million from the acquisitions of the Rexnord PMC and Arrowhead businesses, $65.9 million in improved margins at Power Efficiency Solutions and Industrial Systems, and broad-based 80/20 actions. Operating expenses were $978.4 million, a $263.7 million increase from fiscal 2021. The increase was primarily driven by $275.3 million from the acquisitions of the Rexnord PMC and Arrowhead businesses, partially offset by foreign exchange gains. The Company recognized goodwill and asset impairments of $0.9 million, a decrease of $37.7 million from the prior year.

Net sales for the Industrial Powertrain Solutions segment for fiscal 2022 were $1,666.3 million, a 91.1% increase compared to fiscal 2021 net sales of $871.7 million. The increase consisted of a positive impact from acquisitions of 84.1% and organic sales growth of 9.1%, partially offset by a negative impact from foreign currency translation of 2.1%. The increase was primarily driven by $733.3 million from the acquisition of the Rexnord PMC business. Gross profit increased $342.2 million or 109.8% primarily driven by $277.0 million from the acquisition of the Rexnord PMC business, coupled with the effects of the overall increase in sales and cost reduction initiatives. Operating expenses for fiscal 2022 increased $142.6 million as compared to fiscal 2021. The increase was primarily driven by $185.0 million from the acquisition of the Rexnord PMC business, partially offset by a reduction in transaction costs.

Net sales for the Power Efficiency Solutions segment for fiscal 2022 were $2,227.2 million, an 8.0% increase compared to fiscal 2021 net sales of $2,062.7 million. The increase consisted of organic sales growth of 9.8%, partially offset by a negative impact from foreign currency translation of 1.8%. The organic sales increase was driven by strong growth in the North American market, particularly in the commercial HVAC and residential air moving markets, partially offset by headwinds in China. Gross profit increased $24.6 million or 4.2% primarily driven by favorable price/cost partially offset by freight inflation, lower volumes and increased restructuring costs. Operating expenses for fiscal 2022 increased $5.3 million as compared to fiscal 2021. The increase was primarily due to higher expenses related to commissions, travel, compensation and benefits.

Net sales for the Automation & Motion Control segment for fiscal 2022 were $772.3 million, a 113.5% increase compared to fiscal 2021 net sales of $361.7 million. The increase consisted of a positive impact from acquisitions of 112.3%, and organic sales growth of 4.7%, partially offset by a negative impact from foreign currency translation of 3.5%. The increase was primarily due to $406.3 million from the acquisitions of the Rexnord PMC and Arrowhead businesses. Gross profit increased $150.0 million or 120.2% primarily driven by $136.1 million from the acquisitions of the Rexnord PMC and Arrowhead businesses, as well as lower overhead costs driven by cost reduction initiatives. Operating expenses for fiscal 2022 increased $105.3 million compared to fiscal 2021. The increase was primarily driven by $90.3 million from the acquisitions of the Rexnord PMC and Arrowhead businesses.

Net sales for the Industrial Systems segment for fiscal 2022 were $552.1 million, a 7.4% increase compared to fiscal 2021 net sales of $514.2 million. The increase consisted of organic sales growth of 10.7%, partially offset by a negative foreign currency translation impact of 3.3%. Growth was driven primarily by strength in North America general industrial markets, partially offset by headwinds in China. Gross profit for fiscal 2022 increased $41.3 million or 46.6% primarily due to price realization, partially offset by material inflation. Operating expenses for fiscal 2022 decreased $27.2 million due to a $33.0 goodwill impairment in fiscal 2021 and foreign exchange gains in fiscal 2022 partially offset by increased employee wages in fiscal 2022.

The effective tax rate for fiscal 2022 was 19.4% compared to 24.1% for fiscal 2021. The decrease in the effective rate was primarily due to the impact of nondeductible impairment charges and nondeductible transaction costs related to the Rexnord Transaction.

As noted above, we disclose organic sales, organic sales growth and acquisition growth non-GAAP financial measures, and we reconcile these measures in the table below to GAAP net sales. We believe that these non-GAAP financial measures are useful measures for providing investors with additional information regarding our results of operations and for helping investors understand and compare our operating results across accounting periods and compared to our peers.

Liquidity and Capital Resources

Our principal source of liquidity is cash flow provided by operating activities. In addition to operating income, other significant factors affecting our cash flows include working capital levels, capital expenditures, dividends, share repurchases, acquisitions, and divestitures, availability of debt financing, and the ability to attract long-term capital at acceptable terms.

Cash flow provided by operating activities was $715.3 million for fiscal 2023, a $279.1 million increase from fiscal 2022. This increase was driven primarily by improvements in cash flows related to working capital, partially offset by payments for certain acquisition costs.

Cash flow provided by operating activities was $436.2 million for fiscal 2022, a $78.5 million increase from fiscal 2021. The increase was primarily the result of the Rexnord Transaction partially offset by increased working capital.

Our working capital was $2,057.6 million and $1,998.3 million as of December 31, 2023 and December 31, 2022, respectively. As of December 31, 2023 and December 31, 2022, our current ratio (which is the ratio of our current assets to current liabilities) was 2.6:1 and 3.0:1, respectively. We intend to use operating cash flow to meet our current debt repayment obligations.

Cash flow used in investing activities was $4,983.0 million for fiscal 2023, compared to $113.3 million in fiscal 2022. The change was driven primarily by $4,870.2 million of cash paid for Altra in fiscal 2023. Capital expenditures were $119.1 million in fiscal 2023, compared to $83.8 million in fiscal 2022. The increase was primarily driven by the acquisition of Altra.

Cash flow used in investing activities was $113.3 million for fiscal 2022, compared to $175.7 million in fiscal 2021. The change was driven primarily by the acquisition of our Arrowhead business in fiscal 2021. Capital expenditures were $83.8 million in fiscal 2022, compared to $54.5 million in fiscal 2021. The increase was primarily driven by the Rexnord Transaction.

In fiscal 2024, we anticipate capital spending for property, plant and equipment to be approximately $150 million. We believe that our present manufacturing facilities will be sufficient to provide adequate capacity for our operations in fiscal 2024. We anticipate funding fiscal 2024 capital spending with operating cash flows.

Cash flow provided by financing activities was $4,203.6 million for fiscal 2023, compared to $274.2 million cash flow used in financing activities in fiscal 2022. Net debt borrowings totaled $4,372.5 million in fiscal 2023, compared to net debt borrowings of $106.5 million in fiscal 2022. The increase in net borrowings was primarily driven by the $4.7 billion of Senior Notes issued in January 2023 and the $840.0 million upsize of our unsecured term loan facility in March 2023, partially offset by the repayment of the $500.0 million of Private Placement Notes in January 2023, payments of $322.8 million on the term loan and $330.9 million net repayments made on the revolver in fiscal 2023. We did not repurchase any of our common stock during fiscal 2023 compared to common stock repurchases of $239.2 million in fiscal 2022. We paid $92.8 million in dividends to shareholders in fiscal 2023 compared to $90.9 million in fiscal 2022. In fiscal 2023, we paid distributions of $16.2 million to noncontrolling interests compared to $6.2 million in fiscal 2022. We also paid $51.1 million of deferred financing fees during fiscal 2023. See further discussion of deferred financing fees below.

Cash flow used in financing activities was $274.2 million for fiscal 2022, compared to $117.6 million in fiscal 2021. Net debt repayments totaled $106.5 million in fiscal 2022, compared to net debt repayments of $287.1 million in fiscal 2021. We also repurchased $239.2 million of our common stock during fiscal 2022 compared to $25.8 million in fiscal 2021. We paid $90.9 million in dividends to shareholders in fiscal 2022 compared to $335.6 million in fiscal 2021. The decrease was primarily driven by the special dividend of $284.4 million that was issued to shareholders in connection with the Rexnord Transaction in fiscal 2021. In fiscal 2022, we paid distributions of $6.2 million to noncontrolling interests compared to $4.5 million in fiscal 2021. We also paid $40.6 million of deferred financing fees during fiscal 2022. See further discussion of deferred financing fees below.

The following table presents selected financial information and statistics as of December 31, 2023 and December 31, 2022:

As of December 31, 2023, $616.4 million of our cash, which includes cash in assets held for sale, was held by foreign subsidiaries and could be used in our domestic operations if necessary. We anticipate being able to support our short-term liquidity and operating needs largely through cash generated from operations. We regularly assess our cash needs and the available sources to fund these needs, which includes repatriation of foreign earnings that may be subject to withholding taxes. Under current law, we do not expect restrictions or taxes on repatriation of cash held outside of the United States to have a material effect on our overall liquidity, financial condition or the results of operations for the foreseeable future. We repatriated approximately $843.9 million of foreign cash in fiscal 2023 to support the repayment of debt. We are continuing to evaluate opportunities to repatriate additional foreign cash in fiscal 2024.

We will, from time to time, maintain excess cash balances which may be used to (i) fund operations, (ii) repay outstanding debt, (iii) fund acquisitions, (iv) pay dividends, (v) make investments in new product development programs, (vi) repurchase our common stock, or (vii) fund other corporate objectives.

On March 28, 2022, we entered into a Second Amended and Restated Credit Agreement (the “Credit Agreement”) with JPMorgan Chase Bank, N.A. as Administrative Agent and the lenders named therein, which was subsequently amended on November 17, 2022 (the "First Amendment") and November 30, 2022 (the "Assumption Agreement"), which in combination provide for, among other things:

Borrowings under the Credit Agreement bear interest at floating rates based upon indices determined by the currency of the borrowing (SOFR or an alternative base rate for US Dollar borrowings) or at an alternative base rate, in each case, plus an applicable margin.

As of December 31, 2023 we had $1,053.5 million of borrowings under the Term Facility and $486.8 million of borrowings under Land Term Facility. As of December 31, 2023 we had $98.1 million of borrowings under the Multicurrency Revolving Facility and $1,471.9 million of available borrowing capacity.

In connection with the Altra Transaction, on October 26, 2022, we entered into a commitment letter pursuant to which JPMorgan Chase Bank, N.A. committed to provide the Company approximately $5,500.0 million in aggregate principal amount of senior bridge loans under a 364-day senior unsecured bridge term loan facility (the “Bridge Facility”) to, among other things, fund, in part, the Altra Transaction. As further discussed below, the Bridge Facility was terminated upon issuance of the Senior Notes in January 2023.

On January 24, 2023, we issued $1,100.0 million aggregate principal amount of 6.05% senior notes due 2026 (the “2026 Senior Notes”), $1,250.0 million aggregate principal amount of 6.05% senior notes due 2028 (the “2028 Senior Notes”), $1,100.0 million aggregate principal amount of 6.30% senior notes due 2030 (the “2030 Senior Notes”) and $1,250.0 million aggregate principal amount of 6.40% senior notes due 2033 (the “2033 Senior Notes” and, together with the 2026 Senior Notes, 2028 Senior Notes and 2030 Senior Notes, collectively, the “Senior Notes”).

We received $4,647.0 million in net proceeds from the sale of the Senior Notes, after deducting the initial purchasers’ discounts and offering expenses. We used a portion of the net proceeds to repay our outstanding Private Placement Notes, as further discussed above, and used the remaining net proceeds, together with the incremental term loan commitments under the Term Facility and cash on hand, to fund the consideration for the Altra Transaction, repay certain of Altra’s outstanding indebtedness, and pay certain fees and expenses. Prior to the consummation of the Altra Transaction, we used a portion of the proceeds to repay the outstanding borrowings under the Multicurrency Revolving Facility in January 2023 and invested the remaining net proceeds of approximately $3.6 billion in interest bearing accounts. We recognized $29.4 million in Interest Income from the investment in interest bearing accounts prior to the close of the Altra Transaction.

On March 27, 2023, in connection with the Altra Transaction, we assumed $18.1 million aggregate principal amount of 6.125% senior notes due 2026 (the “Altra Notes”). The Company repurchased 95.28% of the outstanding Altra Notes for total consideration of $382.7 million. See Note 4 – Held for Sale, Acquisitions and Divestitures for more information. The Altra Notes will mature on October 1, 2026.

The Company will incur significant incremental interest expense as a result of the debt issuances above. The Company plans to use cash generated from operations to fund its interest obligations and reduce the principal balance of its debt over time. The Company also plans to use the net proceeds from the proposed sale of its industrial motors and generators businesses to repay outstanding debt. See Note 7 - Debt and Bank Credit Facilities for further information on the agreements/financings discussed above.

The Credit Agreement requires the Company to meet specified financial ratios and to satisfy certain financial condition tests. We were in compliance with all financial covenants as of December 31, 2023.

As of December 31, 2023 and December 31, 2022, the Company had $70.5 million and $73.2 million of finance leases, respectively. See Note 9 - Leases for the weighted average discount rate associated with the Company's finance leases in 2023 and 2022.

See Part 1 - Item 3 - Legal Proceedings and Note 12 – Contingencies of the Notes to the Consolidated Financial Statements for more information.

Final laws enacting the Organisation for Economic Co-operation and Development's global minimum tax framework are in force beginning in 2024 in several countries where we do business, and similar laws could be enacted in other countries where we operate. The Company is assessing enacted laws and monitoring pending legislation, but does not expect the impact of the adoption of the global minimum tax framework to be material to its results of operations.

Off-Balance Sheet Arrangements, Contractual Obligations and Commercial Commitments

The following is a summary of our contractual obligations and payments due by period as of December 31, 2023:

We utilize blanket purchase orders (“Blankets”) to communicate expected annual requirements to many of our suppliers. Requirements under Blankets generally do not become “firm” until a varying number of weeks before our scheduled production. The purchase obligations shown in the above table represent the value we consider “firm.”

The preparation of our consolidated financial statements in accordance with accounting principles generally accepted in the US requires us to make estimates and assumptions affecting the reported amounts of assets and liabilities at the date of the consolidated financial statements and revenues and expenses during the periods reported. Actual results could differ from those estimates. We believe the following critical accounting policies could have the most significant effect on our reported results.

Assets acquired and the liabilities assumed as part of a business combination are recognized separately from goodwill at their acquisition date fair values. Goodwill as of the acquisition date is measured as the excess of consideration transferred over the net of the acquisition date fair values of the assets acquired and the liabilities assumed. We, with the assistance of outside specialists as necessary, use estimates and assumptions to value assets acquired and liabilities assumed at the acquisition date as well as contingent consideration, where applicable. We may refine these estimates during the measurement period which may be up to one year from the acquisition date. As a result, during the measurement period, we record adjustments to the assets acquired and liabilities assumed with the corresponding offset to goodwill. Upon the conclusion of the measurement period or final determination of the values of assets acquired or liabilities assumed, whichever comes first, any subsequent adjustments are recorded to our Consolidated Statements of Income.

We test goodwill for impairment at least annually and perform our annual impairment test as of the end of the October fiscal month. We monitor for goodwill impairment triggering events at least quarterly, and if a trigger is identified we test goodwill for impairment during the interim period. Factors that could trigger an impairment assessment include significant underperformance relative to historical or forecasted operating results, a significant decrease in the market value of an asset or significant negative industry or economic trends. Reporting units with recent impairments or those with goodwill resulting from recent acquisitions generally present the highest risk of impairment.

We determine the fair value of each reporting unit utilizing an income approach (discounted cash flow method) weighted 75% and a market approach (consisting of a comparable public company multiples methodology) weighted 25%. The assumptions that have the most significant effect on the fair value calculations are discount rates, market multiples, forecasted EBITDA and terminal growth rates. Discount rates are determined using market and industry data and reflect the risks and uncertainties inherent to each reporting unit and our internally developed forecasts.

For fiscal 2023, the prospective sale of the industrial motors and generators businesses triggered an interim goodwill impairment test. As a result, the Company recorded $57.3 million of goodwill impairment charges for its global industrial motors reporting unit. See Note 4 - Held for Sale, Acquisitions and Divestitures of the Notes to the Consolidated Financial Statements for further information on the accounting for the prospective sale. We performed the required annual goodwill impairment test for each reporting unit as of the end of the October fiscal month. The discount rates used in our fiscal 2023 reporting unit valuations ranged from 11.5% to 14.0%. Based on the fiscal 2023 annual goodwill test, the fair value of each of the reporting units evaluated using the quantitative testing approach exceeded its carrying value. The fair value exceeded carrying value by more than 10% for each reporting unit except for two reporting units included in the Automation & Motion Control segment. As a result, no goodwill impairments were recorded as a result of the annual goodwill test. There is inherent uncertainty included in the assumptions used in goodwill impairment testing and a change to any of the assumptions could lead to a future impairment, which could be material. See Note 5 – Goodwill and Intangible Assets of the Notes to the Consolidated Financial Statements for more information.

We evaluate the recoverability of the carrying amount of long-lived assets whenever events or changes in circumstance indicate that the carrying amount of an asset may not be fully recoverable through future cash flows. When applying the accounting guidance, we use estimates to determine when an impairment is necessary. Factors that could trigger an impairment review include a significant decrease in the market value of an asset or significant negative or economic trends. For long-lived assets, the Company uses an estimate of the related undiscounted cash flows over the remaining life of the primary asset to estimate recoverability.

Dividends

Quarterly dividends declared by Regal Rexnord Corporation's Board of Directors during the year ended December 31, 2023 and for the first quarter of 2024 were as follows:

We are exposed to market risk relating to our operations due to changes in interest rates, foreign currency exchange rates and commodity prices of purchased raw materials. We manage the exposure to these risks through a combination of normal operating and financing activities and derivative financial instruments such as interest rate swaps, commodity cash flow hedges

and foreign currency forward exchange contracts. All hedging transactions are authorized and executed pursuant to clearly defined policies and procedures, which prohibit the use of financial instruments for speculative purposes.

All qualified hedges are recorded on the balance sheet at fair value and are accounted for as cash flow hedges, with changes in fair value recorded in Accumulated Other Comprehensive Income (Loss) (“AOCI”) in each accounting period. An ineffective portion of the hedges' change in fair value, if any, is recorded in earnings in the period of change.

We are exposed to interest rate risk on certain of our short-term and long-term debt obligations used to finance our operations and acquisitions. As of December 31, 2023, we had $4,796.1 million of fixed rate debt and $1,638.4 million of variable rate debt. As of December 31, 2022, we had $576.7 million of fixed rate debt and $1,452.1 million of variable rate debt. We utilize interest rate swaps to manage fluctuations in cash flows resulting from exposure to interest rate risk on forecasted variable rate interest payments.

We have floating rate borrowings, which expose us to variability in interest payments due to changes in interest rates. A hypothetical 10% change in our weighted average borrowing rate on outstanding variable rate debt as of December 31, 2023 would result in a $11.8 million change in after-tax annualized earnings. We entered into two forward starting pay fixed/receive floating nonamortizing interest rate swaps in June 2020, with a total notional amount of $250.0 million to manage fluctuations in cash flows from interest rate risk related to floating rate interest. These swaps were terminated in March 2022 upon closing the Credit Agreement. The cash proceeds of $16.2 million received to settle the terminated swaps will be recognized into interest expense via the effective interest rate method through July 2025 when the terminated swaps were scheduled to expire. We also entered into two forward starting pay fixed/receive floating non-amortizing interest rate swaps in May 2022, with a total notional amount of $250.0 million to manage fluctuations in cash flows from interest rate risk related to floating rate interest. Upon inception, the swaps were designated as a cash flow hedges against forecasted interest payments with gains and losses, net of tax, measured on an ongoing basis, recorded in AOCI.

Details regarding the instruments as of December 31, 2023 are as follows (in millions):

As of December 31, 2023, a $5.3 million interest rate swap was included in Other Noncurrent Assets. As of December 31, 2022, a $7.9 million interest rate swap was included in Other Noncurrent Assets. There was an unrealized gain of $10.6 million, net of tax, (a $6.5 million gain on the terminated swaps and a $4.1 million gain on the active swaps) for fiscal 2023 and an unrealized gain of $17.0 million, net of tax, (a $11.0 million gain on the terminated swaps and a $6.0 million gain on the active swaps) for fiscal 2022 that were recorded in AOCI for the effective portion of the hedges.

We are exposed to foreign currency risks that arise from normal business operations. These risks include the translation of local currency balances of foreign subsidiaries, intercompany loans with foreign subsidiaries and transactions denominated in foreign currencies. Our objective is to minimize our exposure to these risks through a combination of normal operating activities and the utilization of foreign currency exchange contracts to manage our exposure on the forecasted transactions denominated in currencies other than the applicable functional currency. Contracts are executed with credit worthy banks and are denominated in currencies of major industrial countries. We do not hedge our exposure to the translation of reported results of foreign subsidiaries from local currency to United States dollars.

As of December 31, 2023, derivative currency assets (liabilities) of $14.4 million, $0.2 million and $(6.9) million, are recorded in Prepaid Expenses and Other Current Assets, Other Noncurrent Assets and Other Accrued Expenses, respectively. As of December 31, 2022, derivative currency assets (liabilities) of $13.0 million, $0.9 million and $(4.8) million, are recorded in Prepaid Expenses and Other Current Assets, Other Noncurrent Assets and Other Accrued Expenses, respectively. The unrealized gains on the effective portions of the hedges of $9.3 million net of tax and $6.3 million net of tax, as of December 31, 2023 and December 31, 2022, respectively, are recorded in AOCI. As of December 31, 2023, we had $10.2 million, net of tax, of currency gains on closed hedge instruments in AOCI that will be realized in earnings when the hedged items impact earnings. As of December 31, 2022, we had $5.3 million, net of tax, of currency gains on closed hedge instruments in AOCI that will be realized in earnings when the hedged items impact earnings.

The following table quantifies the outstanding foreign exchange contracts intended to hedge non-US Dollar denominated receivables and payables and the corresponding impact on the value of these instruments assuming a hypothetical 10% appreciation/depreciation of their counter currency on December 31, 2023 (dollars in millions):

Gains and losses indicated in the sensitivity analysis would be largely offset by gains and losses on the underlying forecasted non-US Dollar denominated cash flows.

We periodically enter into commodity hedging transactions to reduce the impact of changing prices for certain commodities such as copper and aluminum based upon forecasted purchases of such commodities. Qualified hedge transactions are designated as cash flow hedges and the contract terms of commodity hedge instruments generally mirror those of the hedged item, providing a high degree of risk reduction and correlation.

Derivative commodity assets (liabilities) of $1.0 million, $0.1 million and $(0.6) million are recorded in Prepaid Expenses and Other Current Assets, Other Noncurrent Assets and Other Accrued Expenses, respectively as of December 31, 2023. Derivative commodity assets (liabilities) of $0.9 million, $0.3 million and $(10.6) million are recorded in Prepaid Expenses and Other Current Assets, Other Noncurrent Assets and Other Accrued Expenses, respectively as of December 31, 2022. The unrealized gain on the effective portion of the hedges of $0.3 million net of tax and unrealized loss of $6.9 million net of tax, as of December 31, 2023 and December 31, 2022, respectively, was recorded in AOCI. As of December 31, 2023, we had $1.6 million, net of tax, derivative commodity losses on closed hedge instruments in AOCI that will be realized in earnings when the hedged items impact earnings. As of December 31, 2022, we had $4.4 million, net of tax, of derivative commodity losses on closed hedge instruments in AOCI that will be realized in earnings when the hedged items impact earnings.

The following table quantifies the outstanding commodity contracts intended to hedge raw material commodity prices and the corresponding impact on the value of these instruments assuming a hypothetical 10% appreciation/depreciation of their prices on December 31, 2023 (dollars in millions):

Gains and losses indicated in the sensitivity analysis would be largely offset by the actual prices of the commodities.

The net AOCI balance related to hedging activities of $28.8 million of gains as of December 31, 2023 includes $22.3 million of net current deferred gains expected to be realized in the next twelve months.

We are exposed to credit losses in the event of non-performance by the counterparties to various financial agreements, including our interest rate swap agreements, foreign currency exchange contracts and commodity hedging transactions. We manage exposure to counterparty credit risk by limiting our counterparties to major international banks and financial institutions meeting established credit guidelines and continually monitoring their compliance with the credit guidelines. We do not obtain collateral or other security to support financial instruments subject to credit risk. We do not anticipate non-performance by our counterparties, but cannot provide assurances.

ITEM 8 - FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Management's Annual Report on Internal Control Over Financial Reporting

The management of Regal Rexnord Corporation (the “Company”) is responsible for the accuracy and internal consistency of the preparation of the consolidated financial statements and footnotes contained in this annual report.

The Company's management is also responsible for establishing and maintaining adequate internal control over financial reporting. The Company operates under a system of internal accounting controls designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of published financial statements in accordance with generally accepted accounting principles. The internal accounting control system is evaluated for effectiveness by management and is tested, monitored and revised as necessary. All internal control systems, no matter how well designed, have inherent limitations. Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation.

Management excluded an assessment of the effectiveness of the Company’s internal control over financial reporting related to the Altra Industrial Motion Corp business ("Altra"). The Company acquired Altra on March 27, 2023. Altra represented 7.6% of the Company's consolidated total assets (excluding acquired goodwill and intangibles which were included in management's assessment of internal control over financial reporting as of December 31, 2023) and 23.5% of the consolidated total revenues as of and for the year ended December 31, 2023.

February 26, 2024

To the shareholders and the Board of Directors of Regal Rexnord Corporation

Fair Value of Acquired Customer Relationship and Trademark Intangible Assets - Refer to Note 4 to the Financial Statements

/s/ Deloitte & Touche LLP

Milwaukee, Wisconsin

February 26, 2024

We have served as the Company's auditor since 2002.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of Regal Rexnord Corporation

Opinion on Internal Control over Financial Reporting

/s/ Deloitte & Touche LLP

Milwaukee, Wisconsin

February 26, 2024

REGAL REXNORD CORPORATION

CONSOLIDATED STATEMENTS OF INCOME (LOSS)